diff options
author | Andrew Baumann <Andrew.Baumann@microsoft.com> | 2016-03-04 11:30:18 +0000 |
---|---|---|
committer | Peter Maydell <peter.maydell@linaro.org> | 2016-03-04 11:30:18 +0000 |
commit | eab713941ab83c6d30739e430357e817bf81dad1 (patch) | |
tree | cce06d5a80235bca5be00a8b8cbccc0ee8c80409 /hw | |
parent | 4824a61a6dc1ce768be5c0a81f16224618104a63 (diff) | |
download | qemu-eab713941ab83c6d30739e430357e817bf81dad1.zip qemu-eab713941ab83c6d30739e430357e817bf81dad1.tar.gz qemu-eab713941ab83c6d30739e430357e817bf81dad1.tar.bz2 |
bcm2835_mbox/property: replace ldl_phys/stl_phys with endian-specific accesses
PMM pointed out that ldl_phys and stl_phys are dependent on the CPU's
endianness, whereas device model code should be independent of
it. This changes the relevant Raspberry Pi devices to explicitly call
the little-endian variants.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456880233-22568-1-git-send-email-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Diffstat (limited to 'hw')
-rw-r--r-- | hw/misc/bcm2835_mbox.c | 6 | ||||
-rw-r--r-- | hw/misc/bcm2835_property.c | 38 |
2 files changed, 22 insertions, 22 deletions
diff --git a/hw/misc/bcm2835_mbox.c b/hw/misc/bcm2835_mbox.c index 500baba..106585a 100644 --- a/hw/misc/bcm2835_mbox.c +++ b/hw/misc/bcm2835_mbox.c @@ -98,7 +98,7 @@ static void bcm2835_mbox_update(BCM2835MboxState *s) */ for (n = 0; n < MBOX_CHAN_COUNT; n++) { while (s->available[n] && !(s->mbox[0].status & ARM_MS_FULL)) { - value = ldl_phys(&s->mbox_as, n << MBOX_AS_CHAN_SHIFT); + value = ldl_le_phys(&s->mbox_as, n << MBOX_AS_CHAN_SHIFT); assert(value != MBOX_INVALID_DATA); /* Pending interrupt but no data */ mbox_push(&s->mbox[0], value); } @@ -207,12 +207,12 @@ static void bcm2835_mbox_write(void *opaque, hwaddr offset, ch = value & 0xf; if (ch < MBOX_CHAN_COUNT) { childaddr = ch << MBOX_AS_CHAN_SHIFT; - if (ldl_phys(&s->mbox_as, childaddr + MBOX_AS_PENDING)) { + if (ldl_le_phys(&s->mbox_as, childaddr + MBOX_AS_PENDING)) { /* Child busy, push delayed. Push it in the arm->vc mbox */ mbox_push(&s->mbox[1], value); } else { /* Push it directly to the child device */ - stl_phys(&s->mbox_as, childaddr, value); + stl_le_phys(&s->mbox_as, childaddr, value); } } else { /* Invalid channel number */ diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index 581922a..41fbbe3 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -22,20 +22,20 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) s->addr = value; - tot_len = ldl_phys(&s->dma_as, value); + tot_len = ldl_le_phys(&s->dma_as, value); /* @(addr + 4) : Buffer response code */ value = s->addr + 8; while (value + 8 <= s->addr + tot_len) { - tag = ldl_phys(&s->dma_as, value); - bufsize = ldl_phys(&s->dma_as, value + 4); + tag = ldl_le_phys(&s->dma_as, value); + bufsize = ldl_le_phys(&s->dma_as, value + 4); /* @(value + 8) : Request/response indicator */ resplen = 0; switch (tag) { case 0x00000000: /* End tag */ break; case 0x00000001: /* Get firmware revision */ - stl_phys(&s->dma_as, value + 12, 346337); + stl_le_phys(&s->dma_as, value + 12, 346337); resplen = 4; break; case 0x00010001: /* Get board model */ @@ -44,7 +44,7 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) resplen = 4; break; case 0x00010002: /* Get board revision */ - stl_phys(&s->dma_as, value + 12, s->board_rev); + stl_le_phys(&s->dma_as, value + 12, s->board_rev); resplen = 4; break; case 0x00010003: /* Get board MAC address */ @@ -58,24 +58,24 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) break; case 0x00010005: /* Get ARM memory */ /* base */ - stl_phys(&s->dma_as, value + 12, 0); + stl_le_phys(&s->dma_as, value + 12, 0); /* size */ - stl_phys(&s->dma_as, value + 16, s->ram_size); + stl_le_phys(&s->dma_as, value + 16, s->ram_size); resplen = 8; break; case 0x00028001: /* Set power state */ /* Assume that whatever device they asked for exists, * and we'll just claim we set it to the desired state */ - tmp = ldl_phys(&s->dma_as, value + 16); - stl_phys(&s->dma_as, value + 16, (tmp & 1)); + tmp = ldl_le_phys(&s->dma_as, value + 16); + stl_le_phys(&s->dma_as, value + 16, (tmp & 1)); resplen = 8; break; /* Clocks */ case 0x00030001: /* Get clock state */ - stl_phys(&s->dma_as, value + 16, 0x1); + stl_le_phys(&s->dma_as, value + 16, 0x1); resplen = 8; break; @@ -88,15 +88,15 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) case 0x00030002: /* Get clock rate */ case 0x00030004: /* Get max clock rate */ case 0x00030007: /* Get min clock rate */ - switch (ldl_phys(&s->dma_as, value + 12)) { + switch (ldl_le_phys(&s->dma_as, value + 12)) { case 1: /* EMMC */ - stl_phys(&s->dma_as, value + 16, 50000000); + stl_le_phys(&s->dma_as, value + 16, 50000000); break; case 2: /* UART */ - stl_phys(&s->dma_as, value + 16, 3000000); + stl_le_phys(&s->dma_as, value + 16, 3000000); break; default: - stl_phys(&s->dma_as, value + 16, 700000000); + stl_le_phys(&s->dma_as, value + 16, 700000000); break; } resplen = 8; @@ -113,19 +113,19 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) /* Temperature */ case 0x00030006: /* Get temperature */ - stl_phys(&s->dma_as, value + 16, 25000); + stl_le_phys(&s->dma_as, value + 16, 25000); resplen = 8; break; case 0x0003000A: /* Get max temperature */ - stl_phys(&s->dma_as, value + 16, 99000); + stl_le_phys(&s->dma_as, value + 16, 99000); resplen = 8; break; case 0x00060001: /* Get DMA channels */ /* channels 2-5 */ - stl_phys(&s->dma_as, value + 12, 0x003C); + stl_le_phys(&s->dma_as, value + 12, 0x003C); resplen = 4; break; @@ -143,12 +143,12 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) break; } - stl_phys(&s->dma_as, value + 8, (1 << 31) | resplen); + stl_le_phys(&s->dma_as, value + 8, (1 << 31) | resplen); value += bufsize + 12; } /* Buffer response code */ - stl_phys(&s->dma_as, s->addr + 4, (1 << 31)); + stl_le_phys(&s->dma_as, s->addr + 4, (1 << 31)); } static uint64_t bcm2835_property_read(void *opaque, hwaddr offset, |