diff options
author | Subbaraya Sundeep <sundeep.lkml@gmail.com> | 2017-09-20 17:17:35 -0300 |
---|---|---|
committer | Peter Maydell <peter.maydell@linaro.org> | 2017-09-21 16:36:56 +0100 |
commit | 268ee7deb4e9bea1c1f9911780f584f71edcf1e0 (patch) | |
tree | fe6da01c5bd8c581b7d091a3476044db187ad13e /hw | |
parent | 0ee1e1f4691cbe5c219be49ac9d0ff4ac4812530 (diff) | |
download | qemu-268ee7deb4e9bea1c1f9911780f584f71edcf1e0.zip qemu-268ee7deb4e9bea1c1f9911780f584f71edcf1e0.tar.gz qemu-268ee7deb4e9bea1c1f9911780f584f71edcf1e0.tar.bz2 |
msf2: Add Smartfusion2 SPI controller
Modelled Microsemi's Smartfusion2 SPI controller.
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170920201737.25723-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Diffstat (limited to 'hw')
-rw-r--r-- | hw/ssi/Makefile.objs | 1 | ||||
-rw-r--r-- | hw/ssi/mss-spi.c | 404 |
2 files changed, 405 insertions, 0 deletions
diff --git a/hw/ssi/Makefile.objs b/hw/ssi/Makefile.objs index 487add2..f5bcc65 100644 --- a/hw/ssi/Makefile.objs +++ b/hw/ssi/Makefile.objs @@ -4,6 +4,7 @@ common-obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o common-obj-$(CONFIG_XILINX_SPIPS) += xilinx_spips.o common-obj-$(CONFIG_ASPEED_SOC) += aspeed_smc.o common-obj-$(CONFIG_STM32F2XX_SPI) += stm32f2xx_spi.o +common-obj-$(CONFIG_MSF2) += mss-spi.o obj-$(CONFIG_OMAP) += omap_spi.o obj-$(CONFIG_IMX) += imx_spi.o diff --git a/hw/ssi/mss-spi.c b/hw/ssi/mss-spi.c new file mode 100644 index 0000000..5a8e308 --- /dev/null +++ b/hw/ssi/mss-spi.c @@ -0,0 +1,404 @@ +/* + * Block model of SPI controller present in + * Microsemi's SmartFusion2 and SmartFusion SoCs. + * + * Copyright (C) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/ssi/mss-spi.h" +#include "qemu/log.h" + +#ifndef MSS_SPI_ERR_DEBUG +#define MSS_SPI_ERR_DEBUG 0 +#endif + +#define DB_PRINT_L(lvl, fmt, args...) do { \ + if (MSS_SPI_ERR_DEBUG >= lvl) { \ + qemu_log("%s: " fmt "\n", __func__, ## args); \ + } \ +} while (0); + +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) + +#define FIFO_CAPACITY 32 + +#define R_SPI_CONTROL 0 +#define R_SPI_DFSIZE 1 +#define R_SPI_STATUS 2 +#define R_SPI_INTCLR 3 +#define R_SPI_RX 4 +#define R_SPI_TX 5 +#define R_SPI_CLKGEN 6 +#define R_SPI_SS 7 +#define R_SPI_MIS 8 +#define R_SPI_RIS 9 + +#define S_TXDONE (1 << 0) +#define S_RXRDY (1 << 1) +#define S_RXCHOVRF (1 << 2) +#define S_RXFIFOFUL (1 << 4) +#define S_RXFIFOFULNXT (1 << 5) +#define S_RXFIFOEMP (1 << 6) +#define S_RXFIFOEMPNXT (1 << 7) +#define S_TXFIFOFUL (1 << 8) +#define S_TXFIFOFULNXT (1 << 9) +#define S_TXFIFOEMP (1 << 10) +#define S_TXFIFOEMPNXT (1 << 11) +#define S_FRAMESTART (1 << 12) +#define S_SSEL (1 << 13) +#define S_ACTIVE (1 << 14) + +#define C_ENABLE (1 << 0) +#define C_MODE (1 << 1) +#define C_INTRXDATA (1 << 4) +#define C_INTTXDATA (1 << 5) +#define C_INTRXOVRFLO (1 << 6) +#define C_SPS (1 << 26) +#define C_BIGFIFO (1 << 29) +#define C_RESET (1 << 31) + +#define FRAMESZ_MASK 0x1F +#define FMCOUNT_MASK 0x00FFFF00 +#define FMCOUNT_SHIFT 8 + +static void txfifo_reset(MSSSpiState *s) +{ + fifo32_reset(&s->tx_fifo); + + s->regs[R_SPI_STATUS] &= ~S_TXFIFOFUL; + s->regs[R_SPI_STATUS] |= S_TXFIFOEMP; +} + +static void rxfifo_reset(MSSSpiState *s) +{ + fifo32_reset(&s->rx_fifo); + + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; +} + +static void set_fifodepth(MSSSpiState *s) +{ + unsigned int size = s->regs[R_SPI_DFSIZE] & FRAMESZ_MASK; + + if (size <= 8) { + s->fifo_depth = 32; + } else if (size <= 16) { + s->fifo_depth = 16; + } else if (size <= 32) { + s->fifo_depth = 8; + } else { + s->fifo_depth = 4; + } +} + +static void update_mis(MSSSpiState *s) +{ + uint32_t reg = s->regs[R_SPI_CONTROL]; + uint32_t tmp; + + /* + * form the Control register interrupt enable bits + * same as RIS, MIS and Interrupt clear registers for simplicity + */ + tmp = ((reg & C_INTRXOVRFLO) >> 4) | ((reg & C_INTRXDATA) >> 3) | + ((reg & C_INTTXDATA) >> 5); + s->regs[R_SPI_MIS] |= tmp & s->regs[R_SPI_RIS]; +} + +static void spi_update_irq(MSSSpiState *s) +{ + int irq; + + update_mis(s); + irq = !!(s->regs[R_SPI_MIS]); + + qemu_set_irq(s->irq, irq); +} + +static void mss_spi_reset(DeviceState *d) +{ + MSSSpiState *s = MSS_SPI(d); + + memset(s->regs, 0, sizeof s->regs); + s->regs[R_SPI_CONTROL] = 0x80000102; + s->regs[R_SPI_DFSIZE] = 0x4; + s->regs[R_SPI_STATUS] = S_SSEL | S_TXFIFOEMP | S_RXFIFOEMP; + s->regs[R_SPI_CLKGEN] = 0x7; + s->regs[R_SPI_RIS] = 0x0; + + s->fifo_depth = 4; + s->frame_count = 1; + s->enabled = false; + + rxfifo_reset(s); + txfifo_reset(s); +} + +static uint64_t +spi_read(void *opaque, hwaddr addr, unsigned int size) +{ + MSSSpiState *s = opaque; + uint32_t ret = 0; + + addr >>= 2; + switch (addr) { + case R_SPI_RX: + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; + s->regs[R_SPI_STATUS] &= ~S_RXCHOVRF; + ret = fifo32_pop(&s->rx_fifo); + if (fifo32_is_empty(&s->rx_fifo)) { + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; + } + break; + + case R_SPI_MIS: + update_mis(s); + ret = s->regs[R_SPI_MIS]; + break; + + default: + if (addr < ARRAY_SIZE(s->regs)) { + ret = s->regs[addr]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, + addr * 4); + return ret; + } + break; + } + + DB_PRINT("addr=0x%" HWADDR_PRIx " = 0x%" PRIx32, addr * 4, ret); + spi_update_irq(s); + return ret; +} + +static void assert_cs(MSSSpiState *s) +{ + qemu_set_irq(s->cs_line, 0); +} + +static void deassert_cs(MSSSpiState *s) +{ + qemu_set_irq(s->cs_line, 1); +} + +static void spi_flush_txfifo(MSSSpiState *s) +{ + uint32_t tx; + uint32_t rx; + bool sps = !!(s->regs[R_SPI_CONTROL] & C_SPS); + + /* + * Chip Select(CS) is automatically controlled by this controller. + * If SPS bit is set in Control register then CS is asserted + * until all the frames set in frame count of Control register are + * transferred. If SPS is not set then CS pulses between frames. + * Note that Slave Select register specifies which of the CS line + * has to be controlled automatically by controller. Bits SS[7:1] are for + * masters in FPGA fabric since we model only Microcontroller subsystem + * of Smartfusion2 we control only one CS(SS[0]) line. + */ + while (!fifo32_is_empty(&s->tx_fifo) && s->frame_count) { + assert_cs(s); + + s->regs[R_SPI_STATUS] &= ~(S_TXDONE | S_RXRDY); + + tx = fifo32_pop(&s->tx_fifo); + DB_PRINT("data tx:0x%" PRIx32, tx); + rx = ssi_transfer(s->spi, tx); + DB_PRINT("data rx:0x%" PRIx32, rx); + + if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= S_RXCHOVRF; + s->regs[R_SPI_RIS] |= S_RXCHOVRF; + } else { + fifo32_push(&s->rx_fifo, rx); + s->regs[R_SPI_STATUS] &= ~S_RXFIFOEMP; + if (fifo32_num_used(&s->rx_fifo) == (s->fifo_depth - 1)) { + s->regs[R_SPI_STATUS] |= S_RXFIFOFULNXT; + } else if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= S_RXFIFOFUL; + } + } + s->frame_count--; + if (!sps) { + deassert_cs(s); + } + } + + if (!s->frame_count) { + s->frame_count = (s->regs[R_SPI_CONTROL] & FMCOUNT_MASK) >> + FMCOUNT_SHIFT; + deassert_cs(s); + s->regs[R_SPI_RIS] |= S_TXDONE | S_RXRDY; + s->regs[R_SPI_STATUS] |= S_TXDONE | S_RXRDY; + } +} + +static void spi_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + MSSSpiState *s = opaque; + uint32_t value = val64; + + DB_PRINT("addr=0x%" HWADDR_PRIx " =0x%" PRIx32, addr, value); + addr >>= 2; + + switch (addr) { + case R_SPI_TX: + /* adding to already full FIFO */ + if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { + break; + } + s->regs[R_SPI_STATUS] &= ~S_TXFIFOEMP; + fifo32_push(&s->tx_fifo, value); + if (fifo32_num_used(&s->tx_fifo) == (s->fifo_depth - 1)) { + s->regs[R_SPI_STATUS] |= S_TXFIFOFULNXT; + } else if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= S_TXFIFOFUL; + } + if (s->enabled) { + spi_flush_txfifo(s); + } + break; + + case R_SPI_CONTROL: + s->regs[R_SPI_CONTROL] = value; + if (value & C_BIGFIFO) { + set_fifodepth(s); + } else { + s->fifo_depth = 4; + } + s->enabled = value & C_ENABLE; + s->frame_count = (value & FMCOUNT_MASK) >> FMCOUNT_SHIFT; + if (value & C_RESET) { + mss_spi_reset(DEVICE(s)); + } + break; + + case R_SPI_DFSIZE: + if (s->enabled) { + break; + } + s->regs[R_SPI_DFSIZE] = value; + break; + + case R_SPI_INTCLR: + s->regs[R_SPI_INTCLR] = value; + if (value & S_TXDONE) { + s->regs[R_SPI_RIS] &= ~S_TXDONE; + } + if (value & S_RXRDY) { + s->regs[R_SPI_RIS] &= ~S_RXRDY; + } + if (value & S_RXCHOVRF) { + s->regs[R_SPI_RIS] &= ~S_RXCHOVRF; + } + break; + + case R_SPI_MIS: + case R_SPI_STATUS: + case R_SPI_RIS: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Write to read only register 0x%" HWADDR_PRIx "\n", + __func__, addr * 4); + break; + + default: + if (addr < ARRAY_SIZE(s->regs)) { + s->regs[addr] = value; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, + addr * 4); + } + break; + } + + spi_update_irq(s); +} + +static const MemoryRegionOps spi_ops = { + .read = spi_read, + .write = spi_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 4 + } +}; + +static void mss_spi_realize(DeviceState *dev, Error **errp) +{ + MSSSpiState *s = MSS_SPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + s->spi = ssi_create_bus(dev, "spi"); + + sysbus_init_irq(sbd, &s->irq); + ssi_auto_connect_slaves(dev, &s->cs_line, s->spi); + sysbus_init_irq(sbd, &s->cs_line); + + memory_region_init_io(&s->mmio, OBJECT(s), &spi_ops, s, + TYPE_MSS_SPI, R_SPI_MAX * 4); + sysbus_init_mmio(sbd, &s->mmio); + + fifo32_create(&s->tx_fifo, FIFO_CAPACITY); + fifo32_create(&s->rx_fifo, FIFO_CAPACITY); +} + +static const VMStateDescription vmstate_mss_spi = { + .name = TYPE_MSS_SPI, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_FIFO32(tx_fifo, MSSSpiState), + VMSTATE_FIFO32(rx_fifo, MSSSpiState), + VMSTATE_UINT32_ARRAY(regs, MSSSpiState, R_SPI_MAX), + VMSTATE_END_OF_LIST() + } +}; + +static void mss_spi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = mss_spi_realize; + dc->reset = mss_spi_reset; + dc->vmsd = &vmstate_mss_spi; +} + +static const TypeInfo mss_spi_info = { + .name = TYPE_MSS_SPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MSSSpiState), + .class_init = mss_spi_class_init, +}; + +static void mss_spi_register_types(void) +{ + type_register_static(&mss_spi_info); +} + +type_init(mss_spi_register_types) |