pl031: Correctly migrate state when using -rtc clock=host

The PL031 RTC tracks the difference between the guest RTC
and the host RTC using a tick_offset field. For migration,
however, we currently always migrate the offset between
the guest and the vm_clock, even if the RTC clock is not
the same as the vm_clock; this was an attempt to retain
migration backwards compatibility.

Unfortunately this results in the RTC behaving oddly across
a VM state save and restore -- since the VM clock stands still
across save-then-restore, regardless of how much real world
time has elapsed, the guest RTC ends up out of sync with the
host RTC in the restored VM.

Fix this by migrating the raw tick_offset. To retain migration
compatibility as far as possible, we have a new property
migrate-tick-offset; by default this is 'true' and we will
migrate the true tick offset in a new subsection; if the
incoming data has no subsection we fall back to the old
vm_clock-based offset information, so old->new migration
compatibility is preserved. For complete new->old migration
compatibility, the property is set to 'false' for 4.0 and
earlier machine types (this will only affect 'virt-4.0'
and below, as none of the other pl031-using machines are
versioned).

Reported-by: Russell King <rmk@armlinux.org.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20190709143912.28905-1-peter.maydell@linaro.org

1 files changed, 88 insertions, 4 deletions

diff --git a/hw/timer/pl031.c b/hw/timer/pl031.c
index 3378084..1a7e2ee 100644
--- a/hw/timer/pl031.c
+++ b/hw/timer/pl031.c
@@ -199,29 +199,94 @@ static int pl031_pre_save(void *opaque)
 {
     PL031State *s = opaque;
 
-    /* tick_offset is base_time - rtc_clock base time.  Instead, we want to
-     * store the base time relative to the QEMU_CLOCK_VIRTUAL for backwards-compatibility.  */
+    /*
+     * The PL031 device model code uses the tick_offset field, which is
+     * the offset between what the guest RTC should read and what the
+     * QEMU rtc_clock reads:
+     *  guest_rtc = rtc_clock + tick_offset
+     * and so
+     *  tick_offset = guest_rtc - rtc_clock
+     *
+     * We want to migrate this offset, which sounds straightforward.
+     * Unfortunately older versions of QEMU migrated a conversion of this
+     * offset into an offset from the vm_clock. (This was in turn an
+     * attempt to be compatible with even older QEMU versions, but it
+     * has incorrect behaviour if the rtc_clock is not the same as the
+     * vm_clock.) So we put the actual tick_offset into a migration
+     * subsection, and the backwards-compatible time-relative-to-vm_clock
+     * in the main migration state.
+     *
+     * Calculate base time relative to QEMU_CLOCK_VIRTUAL:
+     */
     int64_t delta = qemu_clock_get_ns(rtc_clock) - qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
     s->tick_offset_vmstate = s->tick_offset + delta / NANOSECONDS_PER_SECOND;
 
     return 0;
 }
 
+static int pl031_pre_load(void *opaque)
+{
+    PL031State *s = opaque;
+
+    s->tick_offset_migrated = false;
+    return 0;
+}
+
 static int pl031_post_load(void *opaque, int version_id)
 {
     PL031State *s = opaque;
 
-    int64_t delta = qemu_clock_get_ns(rtc_clock) - qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-    s->tick_offset = s->tick_offset_vmstate - delta / NANOSECONDS_PER_SECOND;
+    /*
+     * If we got the tick_offset subsection, then we can just use
+     * the value in that. Otherwise the source is an older QEMU and
+     * has given us the offset from the vm_clock; convert it back to
+     * an offset from the rtc_clock. This will cause time to incorrectly
+     * go backwards compared to the host RTC, but this is unavoidable.
+     */
+
+    if (!s->tick_offset_migrated) {
+        int64_t delta = qemu_clock_get_ns(rtc_clock) -
+            qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+        s->tick_offset = s->tick_offset_vmstate -
+            delta / NANOSECONDS_PER_SECOND;
+    }
     pl031_set_alarm(s);
     return 0;
 }
 
+static int pl031_tick_offset_post_load(void *opaque, int version_id)
+{
+    PL031State *s = opaque;
+
+    s->tick_offset_migrated = true;
+    return 0;
+}
+
+static bool pl031_tick_offset_needed(void *opaque)
+{
+    PL031State *s = opaque;
+
+    return s->migrate_tick_offset;
+}
+
+static const VMStateDescription vmstate_pl031_tick_offset = {
+    .name = "pl031/tick-offset",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = pl031_tick_offset_needed,
+    .post_load = pl031_tick_offset_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(tick_offset, PL031State),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 static const VMStateDescription vmstate_pl031 = {
     .name = "pl031",
     .version_id = 1,
     .minimum_version_id = 1,
     .pre_save = pl031_pre_save,
+    .pre_load = pl031_pre_load,
     .post_load = pl031_post_load,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(tick_offset_vmstate, PL031State),
@@ -231,14 +296,33 @@ static const VMStateDescription vmstate_pl031 = {
         VMSTATE_UINT32(im, PL031State),
         VMSTATE_UINT32(is, PL031State),
         VMSTATE_END_OF_LIST()
+    },
+    .subsections = (const VMStateDescription*[]) {
+        &vmstate_pl031_tick_offset,
+        NULL
     }
 };
 
+static Property pl031_properties[] = {
+    /*
+     * True to correctly migrate the tick offset of the RTC. False to
+     * obtain backward migration compatibility with older QEMU versions,
+     * at the expense of the guest RTC going backwards compared with the
+     * host RTC when the VM is saved/restored if using -rtc host.
+     * (Even if set to 'true' older QEMU can migrate forward to newer QEMU;
+     * 'false' also permits newer QEMU to migrate to older QEMU.)
+     */
+    DEFINE_PROP_BOOL("migrate-tick-offset",
+                     PL031State, migrate_tick_offset, true),
+    DEFINE_PROP_END_OF_LIST()
+};
+
 static void pl031_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
     dc->vmsd = &vmstate_pl031;
+    dc->props = pl031_properties;
 }
 
 static const TypeInfo pl031_info = {