diff options
| author | Hao Wu <wuhaotsh@google.com> | 2024-01-31 00:27:54 +0000 |
|---|---|---|
| committer | Peter Maydell <peter.maydell@linaro.org> | 2024-02-02 13:51:59 +0000 |
| commit | 08f787a34cbeca333bd9a79a5d6723c750abd56e (patch) | |
| tree | 7a0a5e088020de1d732702f78d80f7def4ce8092 /hw/net/trace-events | |
| parent | d0e16850eed350b1eac562f52bf81f2341923b4c (diff) | |
| download | qemu-08f787a34cbeca333bd9a79a5d6723c750abd56e.zip qemu-08f787a34cbeca333bd9a79a5d6723c750abd56e.tar.gz qemu-08f787a34cbeca333bd9a79a5d6723c750abd56e.tar.bz2 | |
hw/net: Add NPCMXXX GMAC device
This patch implements the basic registers of GMAC device and sets
registers for networking functionalities.
Squashed IRQ Implementation patch into this one for compliation.
Tested:
The following message shows up with the change:
Broadcom BCM54612E stmmac-0:00: attached PHY driver [Broadcom BCM54612E] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
stmmaceth f0802000.eth eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Change-Id: If71c6d486b95edcccba109ba454870714d7e0940
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Nabih Estefan Diaz <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240131002800.989285-2-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Diffstat (limited to 'hw/net/trace-events')
| -rw-r--r-- | hw/net/trace-events | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/hw/net/trace-events b/hw/net/trace-events index 387e32e..56057de 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -467,6 +467,18 @@ npcm7xx_emc_rx_done(uint32_t crxdsa) "RX done, CRXDSA=0x%x" npcm7xx_emc_reg_read(int emc_num, uint32_t result, const char *name, int regno) "emc%d: 0x%x = reg[%s/%d]" npcm7xx_emc_reg_write(int emc_num, const char *name, int regno, uint32_t value) "emc%d: reg[%s/%d] = 0x%x" +# npcm_gmac.c +npcm_gmac_reg_read(const char *name, uint64_t offset, uint32_t value) "%s: offset: 0x%04" PRIx64 " value: 0x%04" PRIx32 +npcm_gmac_reg_write(const char *name, uint64_t offset, uint32_t value) "%s: offset: 0x%04" PRIx64 " value: 0x%04" PRIx32 +npcm_gmac_mdio_access(const char *name, uint8_t is_write, uint8_t pa, uint8_t gr, uint16_t val) "%s: is_write: %" PRIu8 " pa: %" PRIu8 " gr: %" PRIu8 " val: 0x%04" PRIx16 +npcm_gmac_reset(const char *name, uint16_t value) "%s: phy_regs[0][1]: 0x%04" PRIx16 +npcm_gmac_set_link(bool active) "Set link: active=%u" +npcm_gmac_update_irq(const char *name, uint32_t status, uint32_t intr_en, int level) "%s: Status Reg: 0x%04" PRIX32 " Interrupt Enable Reg: 0x%04" PRIX32 " IRQ Set: %d" + +# npcm_pcs.c +npcm_pcs_reg_read(const char *name, uint16_t indirect_access_baes, uint64_t offset, uint16_t value) "%s: IND: 0x%02" PRIx16 " offset: 0x%04" PRIx64 " value: 0x%04" PRIx16 +npcm_pcs_reg_write(const char *name, uint16_t indirect_access_baes, uint64_t offset, uint16_t value) "%s: IND: 0x%02" PRIx16 " offset: 0x%04" PRIx64 " value: 0x%04" PRIx16 + # dp8398x.c dp8393x_raise_irq(int isr) "raise irq, isr is 0x%04x" dp8393x_lower_irq(void) "lower irq" |