hw/misc/tz-mpc.c: Implement correct blocked-access behaviour

The MPC is guest-configurable for whether blocked accesses:
 * should be RAZ/WI or cause a bus error
 * should generate an interrupt or not

Implement this behaviour in the blocked-access handlers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20180620132032.28865-4-peter.maydell@linaro.org

1 files changed, 48 insertions, 2 deletions

diff --git a/hw/misc/tz-mpc.c b/hw/misc/tz-mpc.c
index e5b91bf..fded592 100644
--- a/hw/misc/tz-mpc.c
+++ b/hw/misc/tz-mpc.c
@@ -43,6 +43,9 @@ REG32(INT_EN, 0x28)
     FIELD(INT_EN, IRQ, 0, 1)
 REG32(INT_INFO1, 0x2c)
 REG32(INT_INFO2, 0x30)
+    FIELD(INT_INFO2, HMASTER, 0, 16)
+    FIELD(INT_INFO2, HNONSEC, 16, 1)
+    FIELD(INT_INFO2, CFG_NS, 17, 1)
 REG32(INT_SET, 0x34)
     FIELD(INT_SET, IRQ, 0, 1)
 REG32(PIDR4, 0xfd0)
@@ -287,6 +290,45 @@ static const MemoryRegionOps tz_mpc_reg_ops = {
     .impl.max_access_size = 4,
 };
 
+static inline bool tz_mpc_cfg_ns(TZMPC *s, hwaddr addr)
+{
+    /* Return the cfg_ns bit from the LUT for the specified address */
+    hwaddr blknum = addr / s->blocksize;
+    hwaddr blkword = blknum / 32;
+    uint32_t blkbit = 1U << (blknum % 32);
+
+    /* This would imply the address was larger than the size we
+     * defined this memory region to be, so it can't happen.
+     */
+    assert(blkword < s->blk_max);
+    return s->blk_lut[blkword] & blkbit;
+}
+
+static MemTxResult tz_mpc_handle_block(TZMPC *s, hwaddr addr, MemTxAttrs attrs)
+{
+    /* Handle a blocked transaction: raise IRQ, capture info, etc */
+    if (!s->int_stat) {
+        /* First blocked transfer: capture information into INT_INFO1 and
+         * INT_INFO2. Subsequent transfers are still blocked but don't
+         * capture information until the guest clears the interrupt.
+         */
+
+        s->int_info1 = addr;
+        s->int_info2 = 0;
+        s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, HMASTER,
+                                  attrs.requester_id & 0xffff);
+        s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, HNONSEC,
+                                  ~attrs.secure);
+        s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, CFG_NS,
+                                  tz_mpc_cfg_ns(s, addr));
+        s->int_stat |= R_INT_STAT_IRQ_MASK;
+        tz_mpc_irq_update(s);
+    }
+
+    /* Generate bus error if desired; otherwise RAZ/WI */
+    return (s->ctrl & R_CTRL_SEC_RESP_MASK) ? MEMTX_ERROR : MEMTX_OK;
+}
+
 /* Accesses only reach these read and write functions if the MPC is
  * blocking them; non-blocked accesses go directly to the downstream
  * memory region without passing through this code.
@@ -295,19 +337,23 @@ static MemTxResult tz_mpc_mem_blocked_read(void *opaque, hwaddr addr,
                                            uint64_t *pdata,
                                            unsigned size, MemTxAttrs attrs)
 {
+    TZMPC *s = TZ_MPC(opaque);
+
     trace_tz_mpc_mem_blocked_read(addr, size, attrs.secure);
 
     *pdata = 0;
-    return MEMTX_OK;
+    return tz_mpc_handle_block(s, addr, attrs);
 }
 
 static MemTxResult tz_mpc_mem_blocked_write(void *opaque, hwaddr addr,
                                             uint64_t value,
                                             unsigned size, MemTxAttrs attrs)
 {
+    TZMPC *s = TZ_MPC(opaque);
+
     trace_tz_mpc_mem_blocked_write(addr, value, size, attrs.secure);
 
-    return MEMTX_OK;
+    return tz_mpc_handle_block(s, addr, attrs);
 }
 
 static const MemoryRegionOps tz_mpc_mem_blocked_ops = {