ich9: implement strap SPKR pin logic

If the signal is sampled high, this indicates that the system is
strapped to the "No Reboot" mode (ICH9 will disable the TCO Timer system
reboot feature). The status of this strap is readable via the NO_REBOOT
bit (CC: offset 0x3410:bit 5).

The NO_REBOOT bit is set when SPKR pin on ICH9 is sampled high. This bit
may be set or cleared by software if the strap is sampled low but may
not override the strap when it indicates "No Reboot".

This patch implements the logic where hardware has ability to set SPKR
pin through a property named "noreboot" and it's sampled high by
default.

Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

1 files changed, 6 insertions, 0 deletions

diff --git a/hw/isa/lpc_ich9.c b/hw/isa/lpc_ich9.c
index 7af24fa..360699f 100644
--- a/hw/isa/lpc_ich9.c
+++ b/hw/isa/lpc_ich9.c
@@ -692,6 +692,11 @@ static const VMStateDescription vmstate_ich9_lpc = {
     }
 };
 
+static Property ich9_lpc_properties[] = {
+    DEFINE_PROP_BOOL("noreboot", ICH9LPCState, pin_strap.spkr_hi, true),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static void ich9_lpc_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -703,6 +708,7 @@ static void ich9_lpc_class_init(ObjectClass *klass, void *data)
     dc->reset = ich9_lpc_reset;
     k->init = ich9_lpc_init;
     dc->vmsd = &vmstate_ich9_lpc;
+    dc->props = ich9_lpc_properties;
     k->config_write = ich9_lpc_config_write;
     dc->desc = "ICH9 LPC bridge";
     k->vendor_id = PCI_VENDOR_ID_INTEL;