hw/intc/arm_gicv3_its: Don't misuse GITS_TYPE_PHYSICAL define

The GITS_TYPE_PHYSICAL define is the value we set the
GITS_TYPER.Physical field to -- this is 1 to indicate that we support
physical LPIs.  (Support for virtual LPIs is the GITS_TYPER.Virtual
field.) We also use this define as the *value* that we write into an
interrupt translation table entry's INTTYPE field, which should be 1
for a physical interrupt and 0 for a virtual interrupt.  Finally, we
use it as a *mask* when we read the interrupt translation table entry
INTTYPE field.

Untangle this confusion: define an ITE_INTTYPE_VIRTUAL and
ITE_INTTYPE_PHYSICAL to be the valid values of the ITE INTTYPE
field, and replace the ad-hoc collection of ITE_ENTRY_* defines with
use of the FIELD() macro to define the fields of an ITE and the
FIELD_EX64() and FIELD_DP64() macros to read and write them.
We use ITE in the new setup, rather than ITE_ENTRY, because
ITE stands for "Interrupt translation entry" and so the extra
"entry" would be redundant.

We take the opportunity to correct the name of the field that holds
the GICv4 'doorbell' interrupt ID (this is always the value 1023 in a
GICv3, which is why we were calling it the 'spurious' field).

The GITS_TYPE_PHYSICAL define is then used in only one place, where
we set the initial GITS_TYPER value.  Since GITS_TYPER.Physical is
essentially a boolean, hiding the '1' value behind a macro is more
confusing than helpful, so expand out the macro there and remove the
define entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

1 files changed, 14 insertions, 12 deletions

diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 63de866..5a63e9e 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -354,28 +354,30 @@ FIELD(MAPC, RDBASE, 16, 32)
 #define L2_TABLE_VALID_MASK       CMD_FIELD_VALID_MASK
 #define TABLE_ENTRY_VALID_MASK    (1ULL << 0)
 
-/**
- * Default features advertised by this version of ITS
- */
-/* Physical LPIs supported */
-#define GITS_TYPE_PHYSICAL           (1U << 0)
-
 /*
  * 12 bytes Interrupt translation Table Entry size
  * as per Table 5.3 in GICv3 spec
  * ITE Lower 8 Bytes
  *   Bits:    | 49 ... 26 | 25 ... 2 |   1     |   0    |
- *   Values:  |    1023   |  IntNum  | IntType |  Valid |
+ *   Values:  |  Doorbell |  IntNum  | IntType |  Valid |
  * ITE Higher 4 Bytes
  *   Bits:    | 31 ... 16 | 15 ...0 |
  *   Values:  |  vPEID    |  ICID   |
+ * (When Doorbell is unused, as it always is in GICv3, it is 1023)
  */
 #define ITS_ITT_ENTRY_SIZE            0xC
-#define ITE_ENTRY_INTTYPE_SHIFT        1
-#define ITE_ENTRY_INTID_SHIFT          2
-#define ITE_ENTRY_INTID_MASK         MAKE_64BIT_MASK(2, 24)
-#define ITE_ENTRY_INTSP_SHIFT          26
-#define ITE_ENTRY_ICID_MASK          MAKE_64BIT_MASK(0, 16)
+
+FIELD(ITE_L, VALID, 0, 1)
+FIELD(ITE_L, INTTYPE, 1, 1)
+FIELD(ITE_L, INTID, 2, 24)
+FIELD(ITE_L, DOORBELL, 26, 24)
+
+FIELD(ITE_H, ICID, 0, 16)
+FIELD(ITE_H, VPEID, 16, 16)
+
+/* Possible values for ITE_L INTTYPE */
+#define ITE_INTTYPE_VIRTUAL 0
+#define ITE_INTTYPE_PHYSICAL 1
 
 /* 16 bits EventId */
 #define ITS_IDBITS                   GICD_TYPER_IDBITS