acpi: split acpi.c into the common part and the piix4 part.

Split acpi.c into the common part and the piix4 specific part.
The common part will be used later.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

1 files changed, 0 insertions, 562 deletions

diff --git a/hw/acpi.c b/hw/acpi.c
index 891378c..4c4df56 100644
--- a/hw/acpi.c
+++ b/hw/acpi.c
@@ -17,572 +17,10 @@
  */
 #include "hw.h"
 #include "pc.h"
-#include "apm.h"
-#include "pm_smbus.h"
 #include "pci.h"
-#include "qemu-timer.h"
 #include "sysemu.h"
-#include "i2c.h"
-#include "smbus.h"
 #include "acpi.h"
 
-//#define DEBUG
-
-#define ACPI_DBG_IO_ADDR  0xb044
-
-typedef struct PIIX4PMState {
-    PCIDevice dev;
-    uint16_t pmsts;
-    uint16_t pmen;
-    uint16_t pmcntrl;
-
-    APMState apm;
-
-    QEMUTimer *tmr_timer;
-    int64_t tmr_overflow_time;
-
-    PMSMBus smb;
-
-    qemu_irq irq;
-    qemu_irq cmos_s3;
-    qemu_irq smi_irq;
-    int kvm_enabled;
-} PIIX4PMState;
-
-#define ACPI_ENABLE 0xf1
-#define ACPI_DISABLE 0xf0
-
-static PIIX4PMState *pm_state;
-
-static uint32_t get_pmtmr(PIIX4PMState *s)
-{
-    uint32_t d;
-    d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
-    return d & 0xffffff;
-}
-
-static int get_pmsts(PIIX4PMState *s)
-{
-    int64_t d;
-
-    d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
-                 get_ticks_per_sec());
-    if (d >= s->tmr_overflow_time)
-        s->pmsts |= ACPI_BITMASK_TIMER_STATUS;
-    return s->pmsts;
-}
-
-static void pm_update_sci(PIIX4PMState *s)
-{
-    int sci_level, pmsts;
-    int64_t expire_time;
-
-    pmsts = get_pmsts(s);
-    sci_level = (((pmsts & s->pmen) &
-                  (ACPI_BITMASK_RT_CLOCK_ENABLE |
-                   ACPI_BITMASK_POWER_BUTTON_ENABLE |
-                   ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
-                   ACPI_BITMASK_TIMER_ENABLE)) != 0);
-    qemu_set_irq(s->irq, sci_level);
-    /* schedule a timer interruption if needed */
-    if ((s->pmen & ACPI_BITMASK_TIMER_ENABLE) &&
-        !(pmsts & ACPI_BITMASK_TIMER_STATUS)) {
-        expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(),
-                               PM_TIMER_FREQUENCY);
-        qemu_mod_timer(s->tmr_timer, expire_time);
-    } else {
-        qemu_del_timer(s->tmr_timer);
-    }
-}
-
-static void pm_tmr_timer(void *opaque)
-{
-    PIIX4PMState *s = opaque;
-    pm_update_sci(s);
-}
-
-static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
-{
-    PIIX4PMState *s = opaque;
-    addr &= 0x3f;
-    switch(addr) {
-    case 0x00:
-        {
-            int64_t d;
-            int pmsts;
-            pmsts = get_pmsts(s);
-            if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) {
-                /* if TMRSTS is reset, then compute the new overflow time */
-                d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
-                             get_ticks_per_sec());
-                s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
-            }
-            s->pmsts &= ~val;
-            pm_update_sci(s);
-        }
-        break;
-    case 0x02:
-        s->pmen = val;
-        pm_update_sci(s);
-        break;
-    case 0x04:
-        {
-            int sus_typ;
-            s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
-            if (val & ACPI_BITMASK_SLEEP_ENABLE) {
-                /* change suspend type */
-                sus_typ = (val >> 10) & 7;
-                switch(sus_typ) {
-                case 0: /* soft power off */
-                    qemu_system_shutdown_request();
-                    break;
-                case 1:
-                    /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
-                       Pretend that resume was caused by power button */
-                    s->pmsts |= (ACPI_BITMASK_WAKE_STATUS |
-                                 ACPI_BITMASK_POWER_BUTTON_STATUS);
-                    qemu_system_reset_request();
-                    if (s->cmos_s3) {
-                        qemu_irq_raise(s->cmos_s3);
-                    }
-                default:
-                    break;
-                }
-            }
-        }
-        break;
-    default:
-        break;
-    }
-#ifdef DEBUG
-    printf("PM writew port=0x%04x val=0x%04x\n", addr, val);
-#endif
-}
-
-static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
-{
-    PIIX4PMState *s = opaque;
-    uint32_t val;
-
-    addr &= 0x3f;
-    switch(addr) {
-    case 0x00:
-        val = get_pmsts(s);
-        break;
-    case 0x02:
-        val = s->pmen;
-        break;
-    case 0x04:
-        val = s->pmcntrl;
-        break;
-    default:
-        val = 0;
-        break;
-    }
-#ifdef DEBUG
-    printf("PM readw port=0x%04x val=0x%04x\n", addr, val);
-#endif
-    return val;
-}
-
-static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
-{
-    //    PIIX4PMState *s = opaque;
-#ifdef DEBUG
-    addr &= 0x3f;
-    printf("PM writel port=0x%04x val=0x%08x\n", addr, val);
-#endif
-}
-
-static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
-{
-    PIIX4PMState *s = opaque;
-    uint32_t val;
-
-    addr &= 0x3f;
-    switch(addr) {
-    case 0x08:
-        val = get_pmtmr(s);
-        break;
-    default:
-        val = 0;
-        break;
-    }
-#ifdef DEBUG
-    printf("PM readl port=0x%04x val=0x%08x\n", addr, val);
-#endif
-    return val;
-}
-
-static void apm_ctrl_changed(uint32_t val, void *arg)
-{
-    PIIX4PMState *s = arg;
-
-    /* ACPI specs 3.0, 4.7.2.5 */
-    if (val == ACPI_ENABLE) {
-        s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE;
-    } else if (val == ACPI_DISABLE) {
-        s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE;
-    }
-
-    if (s->dev.config[0x5b] & (1 << 1)) {
-        if (s->smi_irq) {
-            qemu_irq_raise(s->smi_irq);
-        }
-    }
-}
-
-static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
-{
-#if defined(DEBUG)
-    printf("ACPI: DBG: 0x%08x\n", val);
-#endif
-}
-
-static void pm_io_space_update(PIIX4PMState *s)
-{
-    uint32_t pm_io_base;
-
-    if (s->dev.config[0x80] & 1) {
-        pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
-        pm_io_base &= 0xffc0;
-
-        /* XXX: need to improve memory and ioport allocation */
-#if defined(DEBUG)
-        printf("PM: mapping to 0x%x\n", pm_io_base);
-#endif
-        register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s);
-        register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s);
-        register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s);
-        register_ioport_read(pm_io_base, 64, 4, pm_ioport_readl, s);
-    }
-}
-
-static void pm_write_config(PCIDevice *d,
-                            uint32_t address, uint32_t val, int len)
-{
-    pci_default_write_config(d, address, val, len);
-    if (range_covers_byte(address, len, 0x80))
-        pm_io_space_update((PIIX4PMState *)d);
-}
-
-static int vmstate_acpi_post_load(void *opaque, int version_id)
-{
-    PIIX4PMState *s = opaque;
-
-    pm_io_space_update(s);
-    return 0;
-}
-
-static const VMStateDescription vmstate_acpi = {
-    .name = "piix4_pm",
-    .version_id = 1,
-    .minimum_version_id = 1,
-    .minimum_version_id_old = 1,
-    .post_load = vmstate_acpi_post_load,
-    .fields      = (VMStateField []) {
-        VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
-        VMSTATE_UINT16(pmsts, PIIX4PMState),
-        VMSTATE_UINT16(pmen, PIIX4PMState),
-        VMSTATE_UINT16(pmcntrl, PIIX4PMState),
-        VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
-        VMSTATE_TIMER(tmr_timer, PIIX4PMState),
-        VMSTATE_INT64(tmr_overflow_time, PIIX4PMState),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
-static void piix4_reset(void *opaque)
-{
-    PIIX4PMState *s = opaque;
-    uint8_t *pci_conf = s->dev.config;
-
-    pci_conf[0x58] = 0;
-    pci_conf[0x59] = 0;
-    pci_conf[0x5a] = 0;
-    pci_conf[0x5b] = 0;
-
-    if (s->kvm_enabled) {
-        /* Mark SMM as already inited (until KVM supports SMM). */
-        pci_conf[0x5B] = 0x02;
-    }
-}
-
-static void piix4_powerdown(void *opaque, int irq, int power_failing)
-{
-    PIIX4PMState *s = opaque;
-
-    if (!s) {
-        qemu_system_shutdown_request();
-    } else if (s->pmen & ACPI_BITMASK_POWER_BUTTON_ENABLE) {
-        s->pmsts |= ACPI_BITMASK_POWER_BUTTON_STATUS;
-        pm_update_sci(s);
-    }
-}
-
-i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
-                       qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
-                       int kvm_enabled)
-{
-    PIIX4PMState *s;
-    uint8_t *pci_conf;
-
-    s = (PIIX4PMState *)pci_register_device(bus,
-                                         "PM", sizeof(PIIX4PMState),
-                                         devfn, NULL, pm_write_config);
-    pm_state = s;
-    pci_conf = s->dev.config;
-    pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
-    pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3);
-    pci_conf[0x06] = 0x80;
-    pci_conf[0x07] = 0x02;
-    pci_conf[0x08] = 0x03; // revision number
-    pci_conf[0x09] = 0x00;
-    pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER);
-    pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
-    pci_conf[0x3d] = 0x01; // interrupt pin 1
-
-    pci_conf[0x40] = 0x01; /* PM io base read only bit */
-
-    /* APM */
-    apm_init(&s->apm, apm_ctrl_changed, s);
-
-    register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
-
-    s->kvm_enabled = kvm_enabled;
-    if (s->kvm_enabled) {
-        /* Mark SMM as already inited to prevent SMM from running.  KVM does not
-         * support SMM mode. */
-        pci_conf[0x5B] = 0x02;
-    }
-
-    /* XXX: which specification is used ? The i82731AB has different
-       mappings */
-    pci_conf[0x5f] = (parallel_hds[0] != NULL ? 0x80 : 0) | 0x10;
-    pci_conf[0x63] = 0x60;
-    pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) |
-	(serial_hds[1] != NULL ? 0x90 : 0);
-
-    pci_conf[0x90] = smb_io_base | 1;
-    pci_conf[0x91] = smb_io_base >> 8;
-    pci_conf[0xd2] = 0x09;
-    register_ioport_write(smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
-    register_ioport_read(smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
-
-    s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
-
-    qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);
-
-    vmstate_register(0, &vmstate_acpi, s);
-
-    pm_smbus_init(NULL, &s->smb);
-    s->irq = sci_irq;
-    s->cmos_s3 = cmos_s3;
-    s->smi_irq = smi_irq;
-    qemu_register_reset(piix4_reset, s);
-
-    return s->smb.smbus;
-}
-
-#define GPE_BASE 0xafe0
-#define PCI_BASE 0xae00
-#define PCI_EJ_BASE 0xae08
-
-struct gpe_regs {
-    uint16_t sts; /* status */
-    uint16_t en;  /* enabled */
-};
-
-struct pci_status {
-    uint32_t up;
-    uint32_t down;
-};
-
-static struct gpe_regs gpe;
-static struct pci_status pci0_status;
-
-static uint32_t gpe_read_val(uint16_t val, uint32_t addr)
-{
-    if (addr & 1)
-        return (val >> 8) & 0xff;
-    return val & 0xff;
-}
-
-static uint32_t gpe_readb(void *opaque, uint32_t addr)
-{
-    uint32_t val = 0;
-    struct gpe_regs *g = opaque;
-    switch (addr) {
-        case GPE_BASE:
-        case GPE_BASE + 1:
-            val = gpe_read_val(g->sts, addr);
-            break;
-        case GPE_BASE + 2:
-        case GPE_BASE + 3:
-            val = gpe_read_val(g->en, addr);
-            break;
-        default:
-            break;
-    }
-
-#if defined(DEBUG)
-    printf("gpe read %x == %x\n", addr, val);
-#endif
-    return val;
-}
-
-static void gpe_write_val(uint16_t *cur, int addr, uint32_t val)
-{
-    if (addr & 1)
-        *cur = (*cur & 0xff) | (val << 8);
-    else
-        *cur = (*cur & 0xff00) | (val & 0xff);
-}
-
-static void gpe_reset_val(uint16_t *cur, int addr, uint32_t val)
-{
-    uint16_t x1, x0 = val & 0xff;
-    int shift = (addr & 1) ? 8 : 0;
-
-    x1 = (*cur >> shift) & 0xff;
-
-    x1 = x1 & ~x0;
-
-    *cur = (*cur & (0xff << (8 - shift))) | (x1 << shift);
-}
-
-static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
-{
-    struct gpe_regs *g = opaque;
-    switch (addr) {
-        case GPE_BASE:
-        case GPE_BASE + 1:
-            gpe_reset_val(&g->sts, addr, val);
-            break;
-        case GPE_BASE + 2:
-        case GPE_BASE + 3:
-            gpe_write_val(&g->en, addr, val);
-            break;
-        default:
-            break;
-   }
-
-#if defined(DEBUG)
-    printf("gpe write %x <== %d\n", addr, val);
-#endif
-}
-
-static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
-{
-    uint32_t val = 0;
-    struct pci_status *g = opaque;
-    switch (addr) {
-        case PCI_BASE:
-            val = g->up;
-            break;
-        case PCI_BASE + 4:
-            val = g->down;
-            break;
-        default:
-            break;
-    }
-
-#if defined(DEBUG)
-    printf("pcihotplug read %x == %x\n", addr, val);
-#endif
-    return val;
-}
-
-static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
-{
-    struct pci_status *g = opaque;
-    switch (addr) {
-        case PCI_BASE:
-            g->up = val;
-            break;
-        case PCI_BASE + 4:
-            g->down = val;
-            break;
-   }
-
-#if defined(DEBUG)
-    printf("pcihotplug write %x <== %d\n", addr, val);
-#endif
-}
-
-static uint32_t pciej_read(void *opaque, uint32_t addr)
-{
-#if defined(DEBUG)
-    printf("pciej read %x\n", addr);
-#endif
-    return 0;
-}
-
-static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
-{
-    BusState *bus = opaque;
-    DeviceState *qdev, *next;
-    PCIDevice *dev;
-    int slot = ffs(val) - 1;
-
-    QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
-        dev = DO_UPCAST(PCIDevice, qdev, qdev);
-        if (PCI_SLOT(dev->devfn) == slot) {
-            qdev_free(qdev);
-        }
-    }
-
-
-#if defined(DEBUG)
-    printf("pciej write %x <== %d\n", addr, val);
-#endif
-}
-
-static int piix4_device_hotplug(PCIDevice *dev, int state);
-
-void piix4_acpi_system_hot_add_init(PCIBus *bus)
-{
-    register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, &gpe);
-    register_ioport_read(GPE_BASE, 4, 1,  gpe_readb, &gpe);
-
-    register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, &pci0_status);
-    register_ioport_read(PCI_BASE, 8, 4,  pcihotplug_read, &pci0_status);
-
-    register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
-    register_ioport_read(PCI_EJ_BASE, 4, 4,  pciej_read, bus);
-
-    pci_bus_hotplug(bus, piix4_device_hotplug);
-}
-
-static void enable_device(struct pci_status *p, struct gpe_regs *g, int slot)
-{
-    g->sts |= 2;
-    p->up |= (1 << slot);
-}
-
-static void disable_device(struct pci_status *p, struct gpe_regs *g, int slot)
-{
-    g->sts |= 2;
-    p->down |= (1 << slot);
-}
-
-static int piix4_device_hotplug(PCIDevice *dev, int state)
-{
-    int slot = PCI_SLOT(dev->devfn);
-
-    pci0_status.up = 0;
-    pci0_status.down = 0;
-    if (state)
-        enable_device(&pci0_status, &gpe, slot);
-    else
-        disable_device(&pci0_status, &gpe, slot);
-    if (gpe.en & 2) {
-        qemu_set_irq(pm_state->irq, 1);
-        qemu_set_irq(pm_state->irq, 0);
-    }
-    return 0;
-}
-
 struct acpi_table_header
 {
     char signature [4];    /* ACPI signature (4 ASCII characters) */