From 93d89f63e5a297f8672daf5d8b7b4df2a999af61 Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Fri, 14 May 2010 16:29:02 +0900 Subject: acpi: split acpi.c into the common part and the piix4 part. Split acpi.c into the common part and the piix4 specific part. The common part will be used later. Signed-off-by: Isaku Yamahata Acked-by: Gerd Hoffmann Signed-off-by: Blue Swirl --- hw/acpi.c | 562 -------------------------------------------------------------- 1 file changed, 562 deletions(-) (limited to 'hw/acpi.c') diff --git a/hw/acpi.c b/hw/acpi.c index 891378c..4c4df56 100644 --- a/hw/acpi.c +++ b/hw/acpi.c @@ -17,572 +17,10 @@ */ #include "hw.h" #include "pc.h" -#include "apm.h" -#include "pm_smbus.h" #include "pci.h" -#include "qemu-timer.h" #include "sysemu.h" -#include "i2c.h" -#include "smbus.h" #include "acpi.h" -//#define DEBUG - -#define ACPI_DBG_IO_ADDR 0xb044 - -typedef struct PIIX4PMState { - PCIDevice dev; - uint16_t pmsts; - uint16_t pmen; - uint16_t pmcntrl; - - APMState apm; - - QEMUTimer *tmr_timer; - int64_t tmr_overflow_time; - - PMSMBus smb; - - qemu_irq irq; - qemu_irq cmos_s3; - qemu_irq smi_irq; - int kvm_enabled; -} PIIX4PMState; - -#define ACPI_ENABLE 0xf1 -#define ACPI_DISABLE 0xf0 - -static PIIX4PMState *pm_state; - -static uint32_t get_pmtmr(PIIX4PMState *s) -{ - uint32_t d; - d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec()); - return d & 0xffffff; -} - -static int get_pmsts(PIIX4PMState *s) -{ - int64_t d; - - d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, - get_ticks_per_sec()); - if (d >= s->tmr_overflow_time) - s->pmsts |= ACPI_BITMASK_TIMER_STATUS; - return s->pmsts; -} - -static void pm_update_sci(PIIX4PMState *s) -{ - int sci_level, pmsts; - int64_t expire_time; - - pmsts = get_pmsts(s); - sci_level = (((pmsts & s->pmen) & - (ACPI_BITMASK_RT_CLOCK_ENABLE | - ACPI_BITMASK_POWER_BUTTON_ENABLE | - ACPI_BITMASK_GLOBAL_LOCK_ENABLE | - ACPI_BITMASK_TIMER_ENABLE)) != 0); - qemu_set_irq(s->irq, sci_level); - /* schedule a timer interruption if needed */ - if ((s->pmen & ACPI_BITMASK_TIMER_ENABLE) && - !(pmsts & ACPI_BITMASK_TIMER_STATUS)) { - expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(), - PM_TIMER_FREQUENCY); - qemu_mod_timer(s->tmr_timer, expire_time); - } else { - qemu_del_timer(s->tmr_timer); - } -} - -static void pm_tmr_timer(void *opaque) -{ - PIIX4PMState *s = opaque; - pm_update_sci(s); -} - -static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val) -{ - PIIX4PMState *s = opaque; - addr &= 0x3f; - switch(addr) { - case 0x00: - { - int64_t d; - int pmsts; - pmsts = get_pmsts(s); - if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) { - /* if TMRSTS is reset, then compute the new overflow time */ - d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, - get_ticks_per_sec()); - s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL; - } - s->pmsts &= ~val; - pm_update_sci(s); - } - break; - case 0x02: - s->pmen = val; - pm_update_sci(s); - break; - case 0x04: - { - int sus_typ; - s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE); - if (val & ACPI_BITMASK_SLEEP_ENABLE) { - /* change suspend type */ - sus_typ = (val >> 10) & 7; - switch(sus_typ) { - case 0: /* soft power off */ - qemu_system_shutdown_request(); - break; - case 1: - /* ACPI_BITMASK_WAKE_STATUS should be set on resume. - Pretend that resume was caused by power button */ - s->pmsts |= (ACPI_BITMASK_WAKE_STATUS | - ACPI_BITMASK_POWER_BUTTON_STATUS); - qemu_system_reset_request(); - if (s->cmos_s3) { - qemu_irq_raise(s->cmos_s3); - } - default: - break; - } - } - } - break; - default: - break; - } -#ifdef DEBUG - printf("PM writew port=0x%04x val=0x%04x\n", addr, val); -#endif -} - -static uint32_t pm_ioport_readw(void *opaque, uint32_t addr) -{ - PIIX4PMState *s = opaque; - uint32_t val; - - addr &= 0x3f; - switch(addr) { - case 0x00: - val = get_pmsts(s); - break; - case 0x02: - val = s->pmen; - break; - case 0x04: - val = s->pmcntrl; - break; - default: - val = 0; - break; - } -#ifdef DEBUG - printf("PM readw port=0x%04x val=0x%04x\n", addr, val); -#endif - return val; -} - -static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val) -{ - // PIIX4PMState *s = opaque; -#ifdef DEBUG - addr &= 0x3f; - printf("PM writel port=0x%04x val=0x%08x\n", addr, val); -#endif -} - -static uint32_t pm_ioport_readl(void *opaque, uint32_t addr) -{ - PIIX4PMState *s = opaque; - uint32_t val; - - addr &= 0x3f; - switch(addr) { - case 0x08: - val = get_pmtmr(s); - break; - default: - val = 0; - break; - } -#ifdef DEBUG - printf("PM readl port=0x%04x val=0x%08x\n", addr, val); -#endif - return val; -} - -static void apm_ctrl_changed(uint32_t val, void *arg) -{ - PIIX4PMState *s = arg; - - /* ACPI specs 3.0, 4.7.2.5 */ - if (val == ACPI_ENABLE) { - s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE; - } else if (val == ACPI_DISABLE) { - s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE; - } - - if (s->dev.config[0x5b] & (1 << 1)) { - if (s->smi_irq) { - qemu_irq_raise(s->smi_irq); - } - } -} - -static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val) -{ -#if defined(DEBUG) - printf("ACPI: DBG: 0x%08x\n", val); -#endif -} - -static void pm_io_space_update(PIIX4PMState *s) -{ - uint32_t pm_io_base; - - if (s->dev.config[0x80] & 1) { - pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40)); - pm_io_base &= 0xffc0; - - /* XXX: need to improve memory and ioport allocation */ -#if defined(DEBUG) - printf("PM: mapping to 0x%x\n", pm_io_base); -#endif - register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s); - register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s); - register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s); - register_ioport_read(pm_io_base, 64, 4, pm_ioport_readl, s); - } -} - -static void pm_write_config(PCIDevice *d, - uint32_t address, uint32_t val, int len) -{ - pci_default_write_config(d, address, val, len); - if (range_covers_byte(address, len, 0x80)) - pm_io_space_update((PIIX4PMState *)d); -} - -static int vmstate_acpi_post_load(void *opaque, int version_id) -{ - PIIX4PMState *s = opaque; - - pm_io_space_update(s); - return 0; -} - -static const VMStateDescription vmstate_acpi = { - .name = "piix4_pm", - .version_id = 1, - .minimum_version_id = 1, - .minimum_version_id_old = 1, - .post_load = vmstate_acpi_post_load, - .fields = (VMStateField []) { - VMSTATE_PCI_DEVICE(dev, PIIX4PMState), - VMSTATE_UINT16(pmsts, PIIX4PMState), - VMSTATE_UINT16(pmen, PIIX4PMState), - VMSTATE_UINT16(pmcntrl, PIIX4PMState), - VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState), - VMSTATE_TIMER(tmr_timer, PIIX4PMState), - VMSTATE_INT64(tmr_overflow_time, PIIX4PMState), - VMSTATE_END_OF_LIST() - } -}; - -static void piix4_reset(void *opaque) -{ - PIIX4PMState *s = opaque; - uint8_t *pci_conf = s->dev.config; - - pci_conf[0x58] = 0; - pci_conf[0x59] = 0; - pci_conf[0x5a] = 0; - pci_conf[0x5b] = 0; - - if (s->kvm_enabled) { - /* Mark SMM as already inited (until KVM supports SMM). */ - pci_conf[0x5B] = 0x02; - } -} - -static void piix4_powerdown(void *opaque, int irq, int power_failing) -{ - PIIX4PMState *s = opaque; - - if (!s) { - qemu_system_shutdown_request(); - } else if (s->pmen & ACPI_BITMASK_POWER_BUTTON_ENABLE) { - s->pmsts |= ACPI_BITMASK_POWER_BUTTON_STATUS; - pm_update_sci(s); - } -} - -i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base, - qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq, - int kvm_enabled) -{ - PIIX4PMState *s; - uint8_t *pci_conf; - - s = (PIIX4PMState *)pci_register_device(bus, - "PM", sizeof(PIIX4PMState), - devfn, NULL, pm_write_config); - pm_state = s; - pci_conf = s->dev.config; - pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL); - pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3); - pci_conf[0x06] = 0x80; - pci_conf[0x07] = 0x02; - pci_conf[0x08] = 0x03; // revision number - pci_conf[0x09] = 0x00; - pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER); - pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type - pci_conf[0x3d] = 0x01; // interrupt pin 1 - - pci_conf[0x40] = 0x01; /* PM io base read only bit */ - - /* APM */ - apm_init(&s->apm, apm_ctrl_changed, s); - - register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s); - - s->kvm_enabled = kvm_enabled; - if (s->kvm_enabled) { - /* Mark SMM as already inited to prevent SMM from running. KVM does not - * support SMM mode. */ - pci_conf[0x5B] = 0x02; - } - - /* XXX: which specification is used ? The i82731AB has different - mappings */ - pci_conf[0x5f] = (parallel_hds[0] != NULL ? 0x80 : 0) | 0x10; - pci_conf[0x63] = 0x60; - pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) | - (serial_hds[1] != NULL ? 0x90 : 0); - - pci_conf[0x90] = smb_io_base | 1; - pci_conf[0x91] = smb_io_base >> 8; - pci_conf[0xd2] = 0x09; - register_ioport_write(smb_io_base, 64, 1, smb_ioport_writeb, &s->smb); - register_ioport_read(smb_io_base, 64, 1, smb_ioport_readb, &s->smb); - - s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s); - - qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1); - - vmstate_register(0, &vmstate_acpi, s); - - pm_smbus_init(NULL, &s->smb); - s->irq = sci_irq; - s->cmos_s3 = cmos_s3; - s->smi_irq = smi_irq; - qemu_register_reset(piix4_reset, s); - - return s->smb.smbus; -} - -#define GPE_BASE 0xafe0 -#define PCI_BASE 0xae00 -#define PCI_EJ_BASE 0xae08 - -struct gpe_regs { - uint16_t sts; /* status */ - uint16_t en; /* enabled */ -}; - -struct pci_status { - uint32_t up; - uint32_t down; -}; - -static struct gpe_regs gpe; -static struct pci_status pci0_status; - -static uint32_t gpe_read_val(uint16_t val, uint32_t addr) -{ - if (addr & 1) - return (val >> 8) & 0xff; - return val & 0xff; -} - -static uint32_t gpe_readb(void *opaque, uint32_t addr) -{ - uint32_t val = 0; - struct gpe_regs *g = opaque; - switch (addr) { - case GPE_BASE: - case GPE_BASE + 1: - val = gpe_read_val(g->sts, addr); - break; - case GPE_BASE + 2: - case GPE_BASE + 3: - val = gpe_read_val(g->en, addr); - break; - default: - break; - } - -#if defined(DEBUG) - printf("gpe read %x == %x\n", addr, val); -#endif - return val; -} - -static void gpe_write_val(uint16_t *cur, int addr, uint32_t val) -{ - if (addr & 1) - *cur = (*cur & 0xff) | (val << 8); - else - *cur = (*cur & 0xff00) | (val & 0xff); -} - -static void gpe_reset_val(uint16_t *cur, int addr, uint32_t val) -{ - uint16_t x1, x0 = val & 0xff; - int shift = (addr & 1) ? 8 : 0; - - x1 = (*cur >> shift) & 0xff; - - x1 = x1 & ~x0; - - *cur = (*cur & (0xff << (8 - shift))) | (x1 << shift); -} - -static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val) -{ - struct gpe_regs *g = opaque; - switch (addr) { - case GPE_BASE: - case GPE_BASE + 1: - gpe_reset_val(&g->sts, addr, val); - break; - case GPE_BASE + 2: - case GPE_BASE + 3: - gpe_write_val(&g->en, addr, val); - break; - default: - break; - } - -#if defined(DEBUG) - printf("gpe write %x <== %d\n", addr, val); -#endif -} - -static uint32_t pcihotplug_read(void *opaque, uint32_t addr) -{ - uint32_t val = 0; - struct pci_status *g = opaque; - switch (addr) { - case PCI_BASE: - val = g->up; - break; - case PCI_BASE + 4: - val = g->down; - break; - default: - break; - } - -#if defined(DEBUG) - printf("pcihotplug read %x == %x\n", addr, val); -#endif - return val; -} - -static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val) -{ - struct pci_status *g = opaque; - switch (addr) { - case PCI_BASE: - g->up = val; - break; - case PCI_BASE + 4: - g->down = val; - break; - } - -#if defined(DEBUG) - printf("pcihotplug write %x <== %d\n", addr, val); -#endif -} - -static uint32_t pciej_read(void *opaque, uint32_t addr) -{ -#if defined(DEBUG) - printf("pciej read %x\n", addr); -#endif - return 0; -} - -static void pciej_write(void *opaque, uint32_t addr, uint32_t val) -{ - BusState *bus = opaque; - DeviceState *qdev, *next; - PCIDevice *dev; - int slot = ffs(val) - 1; - - QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) { - dev = DO_UPCAST(PCIDevice, qdev, qdev); - if (PCI_SLOT(dev->devfn) == slot) { - qdev_free(qdev); - } - } - - -#if defined(DEBUG) - printf("pciej write %x <== %d\n", addr, val); -#endif -} - -static int piix4_device_hotplug(PCIDevice *dev, int state); - -void piix4_acpi_system_hot_add_init(PCIBus *bus) -{ - register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, &gpe); - register_ioport_read(GPE_BASE, 4, 1, gpe_readb, &gpe); - - register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, &pci0_status); - register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, &pci0_status); - - register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus); - register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus); - - pci_bus_hotplug(bus, piix4_device_hotplug); -} - -static void enable_device(struct pci_status *p, struct gpe_regs *g, int slot) -{ - g->sts |= 2; - p->up |= (1 << slot); -} - -static void disable_device(struct pci_status *p, struct gpe_regs *g, int slot) -{ - g->sts |= 2; - p->down |= (1 << slot); -} - -static int piix4_device_hotplug(PCIDevice *dev, int state) -{ - int slot = PCI_SLOT(dev->devfn); - - pci0_status.up = 0; - pci0_status.down = 0; - if (state) - enable_device(&pci0_status, &gpe, slot); - else - disable_device(&pci0_status, &gpe, slot); - if (gpe.en & 2) { - qemu_set_irq(pm_state->irq, 1); - qemu_set_irq(pm_state->irq, 0); - } - return 0; -} - struct acpi_table_header { char signature [4]; /* ACPI signature (4 ASCII characters) */ -- cgit v1.1