diff options
author | zhaolichang <zhaolichang@huawei.com> | 2020-09-17 15:50:22 +0800 |
---|---|---|
committer | Laurent Vivier <laurent@vivier.eu> | 2020-09-17 20:37:13 +0200 |
commit | 76ca4b58c295e154dfe9c2405141e81ce928c19c (patch) | |
tree | 806fd5f82b82da76bef70540867cf902f6fa4496 /docs | |
parent | 3a4452d896821f87f6a933c4cd132c3ff0f58bb4 (diff) | |
download | qemu-76ca4b58c295e154dfe9c2405141e81ce928c19c.zip qemu-76ca4b58c295e154dfe9c2405141e81ce928c19c.tar.gz qemu-76ca4b58c295e154dfe9c2405141e81ce928c19c.tar.bz2 |
docs/: fix some comment spelling errors
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the docs folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200917075029.313-4-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Diffstat (limited to 'docs')
-rw-r--r-- | docs/COLO-FT.txt | 6 | ||||
-rw-r--r-- | docs/devel/blkdebug.txt | 2 | ||||
-rw-r--r-- | docs/devel/migration.rst | 2 | ||||
-rw-r--r-- | docs/devel/testing.rst | 2 | ||||
-rw-r--r-- | docs/devel/tracing.txt | 2 | ||||
-rw-r--r-- | docs/interop/bitmaps.rst | 2 | ||||
-rw-r--r-- | docs/interop/dbus.rst | 4 | ||||
-rw-r--r-- | docs/interop/nbd.txt | 2 | ||||
-rw-r--r-- | docs/interop/vhost-user-gpu.rst | 2 | ||||
-rw-r--r-- | docs/interop/vhost-user.rst | 4 | ||||
-rw-r--r-- | docs/rdma.txt | 2 | ||||
-rw-r--r-- | docs/specs/ppc-spapr-hotplug.txt | 4 | ||||
-rw-r--r-- | docs/specs/ppc-spapr-xive.rst | 4 | ||||
-rw-r--r-- | docs/system/arm/aspeed.rst | 2 | ||||
-rw-r--r-- | docs/system/deprecated.rst | 8 | ||||
-rw-r--r-- | docs/system/target-avr.rst | 4 | ||||
-rw-r--r-- | docs/tools/virtiofsd.rst | 2 |
17 files changed, 27 insertions, 27 deletions
diff --git a/docs/COLO-FT.txt b/docs/COLO-FT.txt index c8e1740..bc5fb2a 100644 --- a/docs/COLO-FT.txt +++ b/docs/COLO-FT.txt @@ -91,7 +91,7 @@ the heartbeat stops responding, the secondary node will trigger a failover as soon as it determines the absence. COLO disk Manager: -When primary VM writes data into image, the colo disk manger captures this data +When primary VM writes data into image, the colo disk manager captures this data and sends it to secondary VM's which makes sure the context of secondary VM's image is consistent with the context of primary VM 's image. For more details, please refer to docs/block-replication.txt. @@ -146,12 +146,12 @@ in test procedure. == Test procedure == Note: Here we are running both instances on the same host for testing, -change the IP Addresses if you want to run it on two hosts. Initally +change the IP Addresses if you want to run it on two hosts. Initially 127.0.0.1 is the Primary Host and 127.0.0.2 is the Secondary Host. == Startup qemu == 1. Primary: -Note: Initally, $imagefolder/primary.qcow2 needs to be copied to all hosts. +Note: Initially, $imagefolder/primary.qcow2 needs to be copied to all hosts. You don't need to change any IP's here, because 0.0.0.0 listens on any interface. The chardev's with 127.0.0.1 IP's loopback to the local qemu instance. diff --git a/docs/devel/blkdebug.txt b/docs/devel/blkdebug.txt index 43d8e8f..0b0c128 100644 --- a/docs/devel/blkdebug.txt +++ b/docs/devel/blkdebug.txt @@ -62,7 +62,7 @@ Rules support the following attributes: errno - the numeric errno value to return when a request matches this rule. The errno values depend on the host since the numeric values are not - standarized in the POSIX specification. + standardized in the POSIX specification. sector - (optional) a sector number that the request must overlap in order to match this rule diff --git a/docs/devel/migration.rst b/docs/devel/migration.rst index 2eb0862..49112bb 100644 --- a/docs/devel/migration.rst +++ b/docs/devel/migration.rst @@ -625,7 +625,7 @@ It can be issued immediately after migration is started or any time later on. Issuing it after the end of a migration is harmless. Blocktime is a postcopy live migration metric, intended to show how -long the vCPU was in state of interruptable sleep due to pagefault. +long the vCPU was in state of interruptible sleep due to pagefault. That metric is calculated both for all vCPUs as overlapped value, and separately for each vCPU. These values are calculated on destination side. To enable postcopy blocktime calculation, enter following diff --git a/docs/devel/testing.rst b/docs/devel/testing.rst index 196e3bc..bd64c1b 100644 --- a/docs/devel/testing.rst +++ b/docs/devel/testing.rst @@ -471,7 +471,7 @@ the warning. A few important files for suppressing warnings are: tests/tsan/suppressions.tsan - Has TSan warnings we wish to suppress at runtime. -The comment on each supression will typically indicate why we are +The comment on each suppression will typically indicate why we are suppressing it. More information on the file format can be found here: https://github.com/google/sanitizers/wiki/ThreadSanitizerSuppressions diff --git a/docs/devel/tracing.txt b/docs/devel/tracing.txt index 6144d99..d216065 100644 --- a/docs/devel/tracing.txt +++ b/docs/devel/tracing.txt @@ -55,7 +55,7 @@ without any sub-directory path prefix. eg io/channel-buffer.c would do #include "trace.h" To access the 'io/trace.h' file. While it is possible to include a trace.h -file from outside a source files' own sub-directory, this is discouraged in +file from outside a source file's own sub-directory, this is discouraged in general. It is strongly preferred that all events be declared directly in the sub-directory that uses them. The only exception is where there are some shared trace events defined in the top level directory trace-events file. diff --git a/docs/interop/bitmaps.rst b/docs/interop/bitmaps.rst index c20bd37..059ad67 100644 --- a/docs/interop/bitmaps.rst +++ b/docs/interop/bitmaps.rst @@ -484,7 +484,7 @@ Bitmaps can generally be modified at any time, but certain operations often only make sense when paired directly with other commands. When a VM is paused, it's easy to ensure that no guest writes occur between individual QMP commands. When a VM is running, this is difficult to accomplish with -individual QMP commands that may allow guest writes to occur inbetween each +individual QMP commands that may allow guest writes to occur between each command. For example, using only individual QMP commands, we could: diff --git a/docs/interop/dbus.rst b/docs/interop/dbus.rst index 76a5bde..be596d3 100644 --- a/docs/interop/dbus.rst +++ b/docs/interop/dbus.rst @@ -57,7 +57,7 @@ Depending on the use case, you may choose different scenarios: - Everything the same UID - Convenient for developers - - Improved reliability - crash of one part doens't take + - Improved reliability - crash of one part doesn't take out entire VM - No security benefit over traditional QEMU, unless additional unless additional controls such as SELinux or AppArmor are @@ -87,7 +87,7 @@ For example, to allow only ``qemu`` user to talk to ``qemu-helper`` </policy> -dbus-daemon can also perfom SELinux checks based on the security +dbus-daemon can also perform SELinux checks based on the security context of the source and the target. For example, ``virtiofs_t`` could be allowed to send a message to ``svirt_t``, but ``virtiofs_t`` wouldn't be allowed to send a message to ``virtiofs_t``. diff --git a/docs/interop/nbd.txt b/docs/interop/nbd.txt index 4511880..f3b3cac 100644 --- a/docs/interop/nbd.txt +++ b/docs/interop/nbd.txt @@ -53,5 +53,5 @@ the operation of that feature. * 2.12: NBD_CMD_BLOCK_STATUS for "base:allocation" * 3.0: NBD_OPT_STARTTLS with TLS Pre-Shared Keys (PSK), NBD_CMD_BLOCK_STATUS for "qemu:dirty-bitmap:", NBD_CMD_CACHE -* 4.2: NBD_FLAG_CAN_MULTI_CONN for sharable read-only exports, +* 4.2: NBD_FLAG_CAN_MULTI_CONN for shareable read-only exports, NBD_CMD_FLAG_FAST_ZERO diff --git a/docs/interop/vhost-user-gpu.rst b/docs/interop/vhost-user-gpu.rst index 688f8b4..3268bf4 100644 --- a/docs/interop/vhost-user-gpu.rst +++ b/docs/interop/vhost-user-gpu.rst @@ -66,7 +66,7 @@ VhostUserGpuCursorPos :scanout-id: ``u32``, the scanout where the cursor is located -:x/y: ``u32``, the cursor postion +:x/y: ``u32``, the cursor position VhostUserGpuCursorUpdate ^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/docs/interop/vhost-user.rst b/docs/interop/vhost-user.rst index 10e3e34..988f154 100644 --- a/docs/interop/vhost-user.rst +++ b/docs/interop/vhost-user.rst @@ -464,7 +464,7 @@ the ``VHOST_USER_SET_MEM_TABLE`` request. For invalidation events, the (3), the I/O virtual address and the size. On success, the slave is expected to reply with a zero payload, non-zero otherwise. -The slave relies on the slave communcation channel (see :ref:`Slave +The slave relies on the slave communication channel (see :ref:`Slave communication <slave_communication>` section below) to send IOTLB miss and access failure events, by sending ``VHOST_USER_SLAVE_IOTLB_MSG`` requests to the master with a ``struct vhost_iotlb_msg`` as @@ -1450,7 +1450,7 @@ vhost-user backends can provide various devices & services and may need to be configured manually depending on the use case. However, it is a good idea to follow the conventions listed here when possible. Users, QEMU or libvirt, can then rely on some common -behaviour to avoid heterogenous configuration and management of the +behaviour to avoid heterogeneous configuration and management of the backend programs and facilitate interoperability. Each backend installed on a host system should come with at least one diff --git a/docs/rdma.txt b/docs/rdma.txt index a86e992..49dc9f8 100644 --- a/docs/rdma.txt +++ b/docs/rdma.txt @@ -261,7 +261,7 @@ qemu_rdma_exchange_send(header, data, optional response header & data): of the connection (described below). All of the remaining command types (not including 'ready') -described above all use the aformentioned two functions to do the hard work: +described above all use the aforementioned two functions to do the hard work: 1. After connection setup, RAMBlock information is exchanged using this protocol before the actual migration begins. This information includes diff --git a/docs/specs/ppc-spapr-hotplug.txt b/docs/specs/ppc-spapr-hotplug.txt index 859d52c..d4fb2d4 100644 --- a/docs/specs/ppc-spapr-hotplug.txt +++ b/docs/specs/ppc-spapr-hotplug.txt @@ -371,7 +371,7 @@ ibm,dynamic-memory This property describes the dynamically reconfigurable memory. It is a property encoded array that has an integer N, the number of LMBs followed -by N LMB list entires. +by N LMB list entries. Each LMB list entry consists of the following elements: @@ -390,7 +390,7 @@ Each LMB list entry consists of the following elements: ibm,dynamic-memory-v2 This property describes the dynamically reconfigurable memory. This is -an alternate and newer way to describe dyanamically reconfigurable memory. +an alternate and newer way to describe dynamically reconfigurable memory. It is a property encoded array that has an integer N (the number of LMB set entries) followed by N LMB set entries. There is an LMB set entry for each sequential group of LMBs that share common attributes. diff --git a/docs/specs/ppc-spapr-xive.rst b/docs/specs/ppc-spapr-xive.rst index 7144347..f47f739 100644 --- a/docs/specs/ppc-spapr-xive.rst +++ b/docs/specs/ppc-spapr-xive.rst @@ -46,7 +46,7 @@ default mode. ``dual`` means that both modes XICS **and** XIVE are supported and if the guest OS supports XIVE, this mode will be selected. -The choosen interrupt mode is activated after a reconfiguration done +The chosen interrupt mode is activated after a reconfiguration done in a machine reset. KVM negotiation @@ -158,7 +158,7 @@ XIVE Device tree properties --------------------------- The properties for the PAPR interrupt controller node when the *XIVE -native exploitation mode* is selected shoud contain: +native exploitation mode* is selected should contain: - ``device_type`` diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index 45f891e..fe45840 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -72,7 +72,7 @@ Boot options ------------ The Aspeed machines can be started using the -kernel option to load a -Linux kernel or from a firmare image which can be downloaded from the +Linux kernel or from a firmware image which can be downloaded from the OpenPOWER jenkins : https://openpower.xyz/ diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst index 0cb8b01..808c334 100644 --- a/docs/system/deprecated.rst +++ b/docs/system/deprecated.rst @@ -79,7 +79,7 @@ Creating sound card devices and vnc without ``audiodev=`` property (since 4.2) When not using the deprecated legacy audio config, each sound card should specify an ``audiodev=`` property. Additionally, when using -vnc, you should specify an ``audiodev=`` propery if you plan to +vnc, you should specify an ``audiodev=`` property if you plan to transmit audio through the VNC protocol. Creating sound card devices using ``-soundhw`` (since 5.1) @@ -111,7 +111,7 @@ Splitting RAM by default between NUMA nodes has the same issues as ``mem`` parameter described above with the difference that the role of the user plays QEMU using implicit generic or board specific splitting rule. Use ``memdev`` with *memory-backend-ram* backend or ``mem`` (if -it's supported by used machine type) to define mapping explictly instead. +it's supported by used machine type) to define mapping explicitly instead. ``-mem-path`` fallback to RAM (since 4.1) ''''''''''''''''''''''''''''''''''''''''' @@ -541,10 +541,10 @@ The ``[hub_id name]`` parameter tuple of the 'hostfwd_add' and Guest Emulator ISAs ------------------- -RISC-V ISA privledge specification version 1.09.1 (removed in 5.1) +RISC-V ISA privilege specification version 1.09.1 (removed in 5.1) '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' -The RISC-V ISA privledge specification version 1.09.1 has been removed. +The RISC-V ISA privilege specification version 1.09.1 has been removed. QEMU supports both the newer version 1.10.0 and the ratified version 1.11.0, these should be used instead of the 1.09.1 version. diff --git a/docs/system/target-avr.rst b/docs/system/target-avr.rst index eb5c513..25ab46e 100644 --- a/docs/system/target-avr.rst +++ b/docs/system/target-avr.rst @@ -10,7 +10,7 @@ xmega6 and xmega7. As for now it supports few Arduino boards for educational and testing purposes. These boards use a ATmega controller, which model is limited to USART & 16-bit -timer devices, enought to run FreeRTOS based applications (like +timer devices, enough to run FreeRTOS based applications (like https://github.com/seharris/qemu-avr-tests/blob/master/free-rtos/Demo/AVR_ATMega2560_GCC/demo.elf ). @@ -30,7 +30,7 @@ AVR cpu telnet localhost 5678 -- Debugging wit GDB debugger:: +- Debugging with GDB debugger:: qemu-system-avr -machine mega2560 -bios demo.elf -s -S diff --git a/docs/tools/virtiofsd.rst b/docs/tools/virtiofsd.rst index e33c81e..7fe6a87 100644 --- a/docs/tools/virtiofsd.rst +++ b/docs/tools/virtiofsd.rst @@ -76,7 +76,7 @@ Options I/O timeout in seconds. The default depends on cache= option. * writeback|no_writeback - - Enable/disable writeback cache. The cache alows the FUSE client to buffer + Enable/disable writeback cache. The cache allows the FUSE client to buffer and merge write requests. The default is ``no_writeback``. * xattr|no_xattr - |