docs/specs: Convert pci-testdev.txt to rst

Convert pci-testdev.txt to reStructuredText. Includes
some minor wordsmithing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230420160334.1048224-4-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

4 files changed, 41 insertions, 32 deletions

diff --git a/docs/specs/index.rst b/docs/specs/index.rst
index dfa1360..e58be38 100644
--- a/docs/specs/index.rst
+++ b/docs/specs/index.rst
@@ -10,6 +10,7 @@ guest hardware that is specific to QEMU.
 
    pci-ids
    pci-serial
+   pci-testdev
    ppc-xive
    ppc-spapr-xive
    ppc-spapr-numa
diff --git a/docs/specs/pci-ids.rst b/docs/specs/pci-ids.rst
index 7bc7168..e302bea 100644
--- a/docs/specs/pci-ids.rst
+++ b/docs/specs/pci-ids.rst
@@ -69,7 +69,7 @@ PCI devices (other than virtio):
 1b36:0004
   PCI Quad-port 16550A adapter (:doc:`pci-serial`)
 1b36:0005
-  PCI test device (``docs/specs/pci-testdev.txt``)
+  PCI test device (:doc:`pci-testdev`)
 1b36:0006
   PCI Rocker Ethernet switch device
 1b36:0007
diff --git a/docs/specs/pci-testdev.rst b/docs/specs/pci-testdev.rst
new file mode 100644
index 0000000..4b6d365
--- /dev/null
+++ b/docs/specs/pci-testdev.rst
@@ -0,0 +1,39 @@
+====================
+QEMU PCI test device
+====================
+
+``pci-testdev`` is a device used for testing low level IO.
+
+The device implements up to three BARs: BAR0, BAR1 and BAR2.
+Each of BAR 0+1 can be memory or IO. Guests must detect
+BAR types and act accordingly.
+
+BAR 0+1 size is up to 4K bytes each.
+BAR 0+1 starts with the following header:
+
+.. code-block:: c
+
+  typedef struct PCITestDevHdr {
+      uint8_t test;        /* write-only, starts a given test number */
+      uint8_t width_type;  /*
+                            * read-only, type and width of access for a given test.
+                            * 1,2,4 for byte,word or long write.
+                            * any other value if test not supported on this BAR
+                            */
+      uint8_t pad0[2];
+      uint32_t offset;     /* read-only, offset in this BAR for a given test */
+      uint32_t data;       /* read-only, data to use for a given test */
+      uint32_t count;      /* for debugging. number of writes detected. */
+      uint8_t name[];      /* for debugging. 0-terminated ASCII string. */
+  } PCITestDevHdr;
+
+All registers are little endian.
+
+The device is expected to always implement tests 0 to N on each BAR, and to add new
+tests with higher numbers.  In this way a guest can scan test numbers until it
+detects an access type that it does not support on this BAR, then stop.
+
+BAR2 is a 64bit memory BAR, without backing storage.  It is disabled
+by default and can be enabled using the ``membar=<size>`` property.  This
+can be used to test whether guests handle PCI BARs of a specific
+(possibly quite large) size correctly.
diff --git a/docs/specs/pci-testdev.txt b/docs/specs/pci-testdev.txt
deleted file mode 100644
index 4280a1e..0000000
--- a/docs/specs/pci-testdev.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-pci-test is a device used for testing low level IO
-
-device implements up to three BARs: BAR0, BAR1 and BAR2.
-Each of BAR 0+1 can be memory or IO. Guests must detect
-BAR types and act accordingly.
-
-BAR 0+1 size is up to 4K bytes each.
-BAR 0+1 starts with the following header:
-
-typedef struct PCITestDevHdr {
-    uint8_t test;  <- write-only, starts a given test number
-    uint8_t width_type; <- read-only, type and width of access for a given test.
-                           1,2,4 for byte,word or long write.
-                           any other value if test not supported on this BAR
-    uint8_t pad0[2];
-    uint32_t offset; <- read-only, offset in this BAR for a given test
-    uint32_t data;    <- read-only, data to use for a given test
-    uint32_t count;  <- for debugging. number of writes detected.
-    uint8_t name[]; <- for debugging. 0-terminated ASCII string.
-} PCITestDevHdr;
-
-All registers are little endian.
-
-device is expected to always implement tests 0 to N on each BAR, and to add new
-tests with higher numbers.  In this way a guest can scan test numbers until it
-detects an access type that it does not support on this BAR, then stop.
-
-BAR2 is a 64bit memory bar, without backing storage.  It is disabled
-by default and can be enabled using the membar=<size> property.  This
-can be used to test whether guests handle pci bars of a specific
-(possibly quite large) size correctly.