hw/arm: Add minimal support for the B-L475E-IOT01A board

This commit adds a new B-L475E-IOT01A board using the STM32L475VG SoC
as well as a dedicated documentation file.
The implementation is derived from the Netduino Plus 2 machine.
There are no peripherals implemented yet, only memory regions.

Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240108135849.351719-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

3 files changed, 51 insertions, 2 deletions

diff --git a/docs/system/arm/b-l475e-iot01a.rst b/docs/system/arm/b-l475e-iot01a.rst
new file mode 100644
index 0000000..2b128e6
--- /dev/null
+++ b/docs/system/arm/b-l475e-iot01a.rst
@@ -0,0 +1,46 @@
+B-L475E-IOT01A IoT Node (``b-l475e-iot01a``)
+============================================
+
+The B-L475E-IOT01A IoT Node uses the STM32L475VG SoC which is based on
+ARM Cortex-M4F core. It is part of STMicroelectronics
+:doc:`STM32 boards </system/arm/stm32>` and more specifically the STM32L4
+ultra-low power series. The STM32L4x5 chip runs at up to 80 MHz and
+integrates 128 KiB of SRAM and up to 1MiB of Flash. The B-L475E-IOT01A board
+namely features 64 Mibit QSPI Flash, BT, WiFi and RF connectivity,
+USART, I2C, SPI, CAN and USB OTG, as well as a variety of sensors.
+
+Supported devices
+"""""""""""""""""
+
+Currently, B-L475E-IOT01A machine's implementation is minimal,
+it only supports the following device:
+
+- Cortex-M4F based STM32L4x5 SoC
+
+Missing devices
+"""""""""""""""
+
+The B-L475E-IOT01A does *not* support the following devices:
+
+- Extended interrupts and events controller (EXTI)
+- Reset and clock control (RCC)
+- Serial ports (UART)
+- System configuration controller (SYSCFG)
+- General-purpose I/Os (GPIO)
+- Analog to Digital Converter (ADC)
+- SPI controller
+- Timer controller (TIMER)
+
+See the complete list of unimplemented peripheral devices
+in the STM32L4x5 module : ``./hw/arm/stm32l4x5_soc.c``
+
+Boot options
+""""""""""""
+
+The B-L475E-IOT01A machine can be started using the ``-kernel``
+option to load a firmware. Example:
+
+.. code-block:: bash
+
+  $ qemu-system-arm -M b-l475e-iot01a -kernel firmware.bin
+
diff --git a/docs/system/arm/stm32.rst b/docs/system/arm/stm32.rst
index d7265b7..3b640f3 100644
--- a/docs/system/arm/stm32.rst
+++ b/docs/system/arm/stm32.rst
@@ -16,11 +16,13 @@ based on this chip :
 
 - ``netduino2``         Netduino 2 board with STM32F205RFT6 microcontroller
 
-The STM32F4 series is based on ARM Cortex-M4F core. This series is pin-to-pin
-compatible with STM32F2 series. The following machines are based on this chip :
+The STM32F4 series is based on ARM Cortex-M4F core, as well as the STM32L4
+ultra-low-power series. The STM32F4 series is pin-to-pin compatible with STM32F2 series.
+The following machines are based on this ARM Cortex-M4F chip :
 
 - ``netduinoplus2``     Netduino Plus 2 board with STM32F405RGT6 microcontroller
 - ``olimex-stm32-h405`` Olimex STM32 H405 board with STM32F405RGT6 microcontroller
+- ``b-l475e-iot01a``     :doc:`B-L475E-IOT01A IoT Node </system/arm/b-l475e-iot01a>` board with STM32L475VG microcontroller
 
 There are many other STM32 series that are currently not supported by QEMU.
 
diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
index 790ac1b..c9d7c0d 100644
--- a/docs/system/target-arm.rst
+++ b/docs/system/target-arm.rst
@@ -84,6 +84,7 @@ undocumented; you can get a complete list by running
    arm/vexpress
    arm/aspeed
    arm/bananapi_m2u.rst
+   arm/b-l475e-iot01a.rst
    arm/sabrelite
    arm/digic
    arm/cubieboard