diff options
author | Peter Maydell <peter.maydell@linaro.org> | 2013-06-25 18:16:07 +0100 |
---|---|---|
committer | Peter Maydell <peter.maydell@linaro.org> | 2013-06-25 18:16:10 +0100 |
commit | f7134d963d94d1fa64a482855585d21dbb58b6bd (patch) | |
tree | 3df3a41fe89bef39db39de043d5b0d7c1cfc2cec | |
parent | 2d8e5a0e25171eca30a72a450826f539f05951d0 (diff) | |
download | qemu-f7134d963d94d1fa64a482855585d21dbb58b6bd.zip qemu-f7134d963d94d1fa64a482855585d21dbb58b6bd.tar.gz qemu-f7134d963d94d1fa64a482855585d21dbb58b6bd.tar.bz2 |
target-arm: Use tuple list to sync cp regs with KVM
Use the tuple list of cp registers for syncing KVM state to QEMU,
rather than only syncing a very minimal set by hand.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-rw-r--r-- | target-arm/kvm.c | 103 |
1 files changed, 33 insertions, 70 deletions
diff --git a/target-arm/kvm.c b/target-arm/kvm.c index 49108cf..d3937a2 100644 --- a/target-arm/kvm.c +++ b/target-arm/kvm.c @@ -344,17 +344,6 @@ typedef struct Reg { offsetof(CPUARMState, QEMUFIELD) \ } -#define CP15REG(CRN, CRM, OPC1, OPC2, QEMUFIELD) \ - { \ - KVM_REG_ARM | KVM_REG_SIZE_U32 | \ - (15 << KVM_REG_ARM_COPROC_SHIFT) | \ - ((CRN) << KVM_REG_ARM_32_CRN_SHIFT) | \ - ((CRM) << KVM_REG_ARM_CRM_SHIFT) | \ - ((OPC1) << KVM_REG_ARM_OPC1_SHIFT) | \ - ((OPC2) << KVM_REG_ARM_32_OPC2_SHIFT), \ - offsetof(CPUARMState, QEMUFIELD) \ - } - #define VFPSYSREG(R) \ { \ KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP | \ @@ -403,12 +392,6 @@ static const Reg regs[] = { COREREG(fiq_regs[7], banked_spsr[5]), /* R15 */ COREREG(usr_regs.uregs[15], regs[15]), - /* A non-comprehensive set of cp15 registers. - * TODO: drive this from the cp_regs hashtable instead. - */ - CP15REG(1, 0, 0, 0, cp15.c1_sys), /* SCTLR */ - CP15REG(2, 0, 0, 2, cp15.c2_control), /* TTBCR */ - CP15REG(3, 0, 0, 0, cp15.c3), /* DACR */ /* VFP system registers */ VFPSYSREG(FPSID), VFPSYSREG(MVFR1), @@ -426,7 +409,6 @@ int kvm_arch_put_registers(CPUState *cs, int level) int mode, bn; int ret, i; uint32_t cpsr, fpscr; - uint64_t ttbr; /* Make sure the banked regs are properly set */ mode = env->uncached_cpsr & CPSR_M; @@ -460,26 +442,6 @@ int kvm_arch_put_registers(CPUState *cs, int level) return ret; } - /* TTBR0: cp15 crm=2 opc1=0 */ - ttbr = ((uint64_t)env->cp15.c2_base0_hi << 32) | env->cp15.c2_base0; - r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) | - (2 << KVM_REG_ARM_CRM_SHIFT) | (0 << KVM_REG_ARM_OPC1_SHIFT); - r.addr = (uintptr_t)(&ttbr); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r); - if (ret) { - return ret; - } - - /* TTBR1: cp15 crm=2 opc1=1 */ - ttbr = ((uint64_t)env->cp15.c2_base1_hi << 32) | env->cp15.c2_base1; - r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) | - (2 << KVM_REG_ARM_CRM_SHIFT) | (1 << KVM_REG_ARM_OPC1_SHIFT); - r.addr = (uintptr_t)(&ttbr); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r); - if (ret) { - return ret; - } - /* VFP registers */ r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP; for (i = 0; i < 32; i++) { @@ -496,6 +458,31 @@ int kvm_arch_put_registers(CPUState *cs, int level) fpscr = vfp_get_fpscr(env); r.addr = (uintptr_t)&fpscr; ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r); + if (ret) { + return ret; + } + + /* Note that we do not call write_cpustate_to_list() + * here, so we are only writing the tuple list back to + * KVM. This is safe because nothing can change the + * CPUARMState cp15 fields (in particular gdb accesses cannot) + * and so there are no changes to sync. In fact syncing would + * be wrong at this point: for a constant register where TCG and + * KVM disagree about its value, the preceding write_list_to_cpustate() + * would not have had any effect on the CPUARMState value (since the + * register is read-only), and a write_cpustate_to_list() here would + * then try to write the TCG value back into KVM -- this would either + * fail or incorrectly change the value the guest sees. + * + * If we ever want to allow the user to modify cp15 registers via + * the gdb stub, we would need to be more clever here (for instance + * tracking the set of registers kvm_arch_get_registers() successfully + * managed to update the CPUARMState with, and only allowing those + * to be written back up into the kernel). + */ + if (!write_list_to_kvmstate(cpu)) { + return EINVAL; + } return ret; } @@ -508,7 +495,6 @@ int kvm_arch_get_registers(CPUState *cs) int mode, bn; int ret, i; uint32_t cpsr, fpscr; - uint64_t ttbr; for (i = 0; i < ARRAY_SIZE(regs); i++) { r.id = regs[i].id; @@ -529,28 +515,6 @@ int kvm_arch_get_registers(CPUState *cs) } cpsr_write(env, cpsr, 0xffffffff); - /* TTBR0: cp15 crm=2 opc1=0 */ - r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) | - (2 << KVM_REG_ARM_CRM_SHIFT) | (0 << KVM_REG_ARM_OPC1_SHIFT); - r.addr = (uintptr_t)(&ttbr); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r); - if (ret) { - return ret; - } - env->cp15.c2_base0_hi = ttbr >> 32; - env->cp15.c2_base0 = ttbr; - - /* TTBR1: cp15 crm=2 opc1=1 */ - r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | (15 << KVM_REG_ARM_COPROC_SHIFT) | - (2 << KVM_REG_ARM_CRM_SHIFT) | (1 << KVM_REG_ARM_OPC1_SHIFT); - r.addr = (uintptr_t)(&ttbr); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r); - if (ret) { - return ret; - } - env->cp15.c2_base1_hi = ttbr >> 32; - env->cp15.c2_base1 = ttbr; - /* Make sure the current mode regs are properly set */ mode = env->uncached_cpsr & CPSR_M; bn = bank_number(mode); @@ -563,15 +527,6 @@ int kvm_arch_get_registers(CPUState *cs) env->regs[14] = env->banked_r14[bn]; env->spsr = env->banked_spsr[bn]; - /* The main GET_ONE_REG loop above set c2_control, but we need to - * update some extra cached precomputed values too. - * When this is driven from the cp_regs hashtable then this ugliness - * can disappear because we'll use the access function which sets - * these values automatically. - */ - env->cp15.c2_mask = ~(0xffffffffu >> env->cp15.c2_control); - env->cp15.c2_base_mask = ~(0x3fffu >> env->cp15.c2_control); - /* VFP registers */ r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP; for (i = 0; i < 32; i++) { @@ -592,6 +547,14 @@ int kvm_arch_get_registers(CPUState *cs) } vfp_set_fpscr(env, fpscr); + if (!write_kvmstate_to_list(cpu)) { + return EINVAL; + } + /* Note that it's OK to have registers which aren't in CPUState, + * so we can ignore a failure return here. + */ + write_list_to_cpustate(cpu); + return 0; } |