Merge remote-tracking branch 'remotes/philmd-gitlab/tags/pflash-next-20190701' into staging

Implement the following AMD command-set parallel flash functionality:
- nonuniform sector sizes;
- erase suspend/resume commands; and
- multi-sector erase.

# gpg: Signature made Tue 02 Jul 2019 01:54:33 BST
# gpg:                using RSA key E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/pflash-next-20190701: (27 commits)
  hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit
  hw/block/pflash_cfi02: Document commands
  hw/block/pflash_cfi02: Use chip erase time specified in the CFI table
  hw/block/pflash_cfi02: Implement erase suspend/resume
  hw/block/pflash_cfi02: Implement multi-sector erase
  hw/block/pflash_cfi02: Fix reset command not ignored during erase
  hw/block/pflash_cfi02: Fix CFI in autoselect mode
  hw/block/pflash_cfi02: Split if() condition
  hw/block/pflash_cfi02: Extract pflash_regions_count()
  hw/block/pflash_cfi02: Implement nonuniform sector sizes
  hw/block/pflash_cfi02: Document 'Page Mode' operations are not supported
  hw/block/pflash_cfi02: Hold the PRI table offset in a variable
  hw/block/pflash_cfi02: Document the current CFI values
  hw/block/pflash_cfi02: Remove pointless local variable
  tests/pflash-cfi02: Refactor to support testing multiple configurations
  hw/block/pflash_cfi02: Fix command address comparison
  hw/block/pflash_cfi02: Unify the MemoryRegionOps
  hw/block/pflash_cfi02: Extract the pflash_data_read() function
  hw/block/pflash_cfi02: Use the ldst API in pflash_read()
  hw/block/pflash_cfi02: Use the ldst API in pflash_write()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

5 files changed, 1175 insertions, 236 deletions

diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c
index 35080d9..db4a246 100644
--- a/hw/block/pflash_cfi01.c
+++ b/hw/block/pflash_cfi01.c
@@ -248,7 +248,6 @@ static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset,
     switch (width) {
     case 1:
         ret = p[offset];
-        trace_pflash_data_read8(offset, ret);
         break;
     case 2:
         if (be) {
@@ -258,7 +257,6 @@ static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset,
             ret = p[offset];
             ret |= p[offset + 1] << 8;
         }
-        trace_pflash_data_read16(offset, ret);
         break;
     case 4:
         if (be) {
@@ -272,12 +270,12 @@ static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset,
             ret |= p[offset + 2] << 16;
             ret |= p[offset + 3] << 24;
         }
-        trace_pflash_data_read32(offset, ret);
         break;
     default:
         DPRINTF("BUG in %s\n", __func__);
         abort();
     }
+    trace_pflash_data_read(offset, width << 1, ret);
     return ret;
 }
 
@@ -288,7 +286,6 @@ static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,
     uint32_t ret;
 
     ret = -1;
-    trace_pflash_read(offset, pfl->cmd, width, pfl->wcycle);
     switch (pfl->cmd) {
     default:
         /* This should never happen : reset state & treat it as a read */
@@ -391,6 +388,8 @@ static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,
 
         break;
     }
+    trace_pflash_io_read(offset, width, width << 1, ret, pfl->cmd, pfl->wcycle);
+
     return ret;
 }
 
@@ -414,7 +413,7 @@ static inline void pflash_data_write(PFlashCFI01 *pfl, hwaddr offset,
 {
     uint8_t *p = pfl->storage;
 
-    trace_pflash_data_write(offset, value, width, pfl->counter);
+    trace_pflash_data_write(offset, width << 1, value, pfl->counter);
     switch (width) {
     case 1:
         p[offset] = value;
@@ -453,7 +452,7 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset,
 
     cmd = value;
 
-    trace_pflash_write(offset, value, width, pfl->wcycle);
+    trace_pflash_io_write(offset, width, width << 1, value, pfl->wcycle);
     if (!pfl->wcycle) {
         /* Set the device in I/O access mode */
         memory_region_rom_device_set_romd(&pfl->mem, false);
diff --git a/hw/block/pflash_cfi02.c b/hw/block/pflash_cfi02.c
index eb106f4..5392290 100644
--- a/hw/block/pflash_cfi02.c
+++ b/hw/block/pflash_cfi02.c
@@ -29,10 +29,7 @@
  * - CFI queries
  *
  * It does not support flash interleaving.
- * It does not implement boot blocs with reduced size
  * It does not implement software data protection as found in many real chips
- * It does not implement erase suspend/resume commands
- * It does not implement multiple sectors erase
  */
 
 #include "qemu/osdep.h"
@@ -40,6 +37,7 @@
 #include "hw/block/block.h"
 #include "hw/block/flash.h"
 #include "qapi/error.h"
+#include "qemu/bitmap.h"
 #include "qemu/timer.h"
 #include "sysemu/block-backend.h"
 #include "qemu/host-utils.h"
@@ -47,26 +45,40 @@
 #include "hw/sysbus.h"
 #include "trace.h"
 
-//#define PFLASH_DEBUG
-#ifdef PFLASH_DEBUG
+#define PFLASH_DEBUG false
 #define DPRINTF(fmt, ...)                                  \
 do {                                                       \
-    fprintf(stderr, "PFLASH: " fmt , ## __VA_ARGS__);       \
+    if (PFLASH_DEBUG) {                                    \
+        fprintf(stderr, "PFLASH: " fmt, ## __VA_ARGS__);   \
+    }                                                      \
 } while (0)
-#else
-#define DPRINTF(fmt, ...) do { } while (0)
-#endif
 
 #define PFLASH_LAZY_ROMD_THRESHOLD 42
 
+/*
+ * The size of the cfi_table indirectly depends on this and the start of the
+ * PRI table directly depends on it. 4 is the maximum size (and also what
+ * seems common) without changing the PRT table address.
+ */
+#define PFLASH_MAX_ERASE_REGIONS 4
+
+/* Special write cycles for CFI queries. */
+enum {
+    WCYCLE_CFI              = 7,
+    WCYCLE_AUTOSELECT_CFI   = 8,
+};
+
 struct PFlashCFI02 {
     /*< private >*/
     SysBusDevice parent_obj;
     /*< public >*/
 
     BlockBackend *blk;
-    uint32_t sector_len;
-    uint32_t nb_blocs;
+    uint32_t uniform_nb_blocs;
+    uint32_t uniform_sector_len;
+    uint32_t total_sectors;
+    uint32_t nb_blocs[PFLASH_MAX_ERASE_REGIONS];
+    uint32_t sector_len[PFLASH_MAX_ERASE_REGIONS];
     uint32_t chip_len;
     uint8_t mappings;
     uint8_t width;
@@ -83,7 +95,7 @@ struct PFlashCFI02 {
     uint16_t ident3;
     uint16_t unlock_addr0;
     uint16_t unlock_addr1;
-    uint8_t cfi_table[0x52];
+    uint8_t cfi_table[0x4d];
     QEMUTimer timer;
     /* The device replicates the flash memory across its memory space.  Emulate
      * that by having a container (.mem) filled with an array of aliases
@@ -94,11 +106,63 @@ struct PFlashCFI02 {
     MemoryRegion orig_mem;
     int rom_mode;
     int read_counter; /* used for lazy switch-back to rom mode */
+    int sectors_to_erase;
+    uint64_t erase_time_remaining;
+    unsigned long *sector_erase_map;
     char *name;
     void *storage;
 };
 
 /*
+ * Toggle status bit DQ7.
+ */
+static inline void toggle_dq7(PFlashCFI02 *pfl)
+{
+    pfl->status ^= 0x80;
+}
+
+/*
+ * Set status bit DQ7 to bit 7 of value.
+ */
+static inline void set_dq7(PFlashCFI02 *pfl, uint8_t value)
+{
+    pfl->status &= 0x7F;
+    pfl->status |= value & 0x80;
+}
+
+/*
+ * Toggle status bit DQ6.
+ */
+static inline void toggle_dq6(PFlashCFI02 *pfl)
+{
+    pfl->status ^= 0x40;
+}
+
+/*
+ * Turn on DQ3.
+ */
+static inline void assert_dq3(PFlashCFI02 *pfl)
+{
+    pfl->status |= 0x08;
+}
+
+/*
+ * Turn off DQ3.
+ */
+static inline void reset_dq3(PFlashCFI02 *pfl)
+{
+    pfl->status &= ~0x08;
+}
+
+/*
+ * Toggle status bit DQ2.
+ */
+static inline void toggle_dq2(PFlashCFI02 *pfl)
+{
+    pfl->status ^= 0x04;
+}
+
+/*
  * Set up replicated mappings of the same region.
  */
 static void pflash_setup_mappings(PFlashCFI02 *pfl)
@@ -121,13 +185,63 @@ static void pflash_register_memory(PFlashCFI02 *pfl, int rom_mode)
     pfl->rom_mode = rom_mode;
 }
 
-static void pflash_timer (void *opaque)
+static size_t pflash_regions_count(PFlashCFI02 *pfl)
+{
+    return pfl->cfi_table[0x2c];
+}
+
+/*
+ * Returns the time it takes to erase the number of sectors scheduled for
+ * erasure based on CFI address 0x21 which is "Typical timeout per individual
+ * block erase 2^N ms."
+ */
+static uint64_t pflash_erase_time(PFlashCFI02 *pfl)
+{
+    /*
+     * If there are no sectors to erase (which can happen if all of the sectors
+     * to be erased are protected), then erase takes 100 us. Protected sectors
+     * aren't supported so this should never happen.
+     */
+    return ((1ULL << pfl->cfi_table[0x21]) * pfl->sectors_to_erase) * SCALE_US;
+}
+
+/*
+ * Returns true if the device is currently in erase suspend mode.
+ */
+static inline bool pflash_erase_suspend_mode(PFlashCFI02 *pfl)
+{
+    return pfl->erase_time_remaining > 0;
+}
+
+static void pflash_timer(void *opaque)
 {
     PFlashCFI02 *pfl = opaque;
 
     trace_pflash_timer_expired(pfl->cmd);
+    if (pfl->cmd == 0x30) {
+        /*
+         * Sector erase. If DQ3 is 0 when the timer expires, then the 50
+         * us erase timeout has expired so we need to start the timer for the
+         * sector erase algorithm. Otherwise, the erase completed and we should
+         * go back to read array mode.
+         */
+        if ((pfl->status & 0x08) == 0) {
+            assert_dq3(pfl);
+            uint64_t timeout = pflash_erase_time(pfl);
+            timer_mod(&pfl->timer,
+                      qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + timeout);
+            DPRINTF("%s: erase timeout fired; erasing %d sectors\n",
+                    __func__, pfl->sectors_to_erase);
+            return;
+        }
+        DPRINTF("%s: sector erase complete\n", __func__);
+        bitmap_zero(pfl->sector_erase_map, pfl->total_sectors);
+        pfl->sectors_to_erase = 0;
+        reset_dq3(pfl);
+    }
+
     /* Reset flash */
-    pfl->status ^= 0x80;
+    toggle_dq7(pfl);
     if (pfl->bypass) {
         pfl->wcycle = 2;
     } else {
@@ -137,15 +251,63 @@ static void pflash_timer (void *opaque)
     pfl->cmd = 0;
 }
 
-static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,
-                            int width, int be)
+/*
+ * Read data from flash.
+ */
+static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset,
+                                 unsigned int width)
+{
+    uint8_t *p = (uint8_t *)pfl->storage + offset;
+    uint64_t ret = pfl->be ? ldn_be_p(p, width) : ldn_le_p(p, width);
+    trace_pflash_data_read(offset, width << 1, ret);
+    return ret;
+}
+
+typedef struct {
+    uint32_t len;
+    uint32_t num;
+} SectorInfo;
+
+/*
+ * offset should be a byte offset of the QEMU device and _not_ a device
+ * offset.
+ */
+static SectorInfo pflash_sector_info(PFlashCFI02 *pfl, hwaddr offset)
 {
+    assert(offset < pfl->chip_len);
+    hwaddr addr = 0;
+    uint32_t sector_num = 0;
+    for (int i = 0; i < pflash_regions_count(pfl); ++i) {
+        uint64_t region_size = (uint64_t)pfl->nb_blocs[i] * pfl->sector_len[i];
+        if (addr <= offset && offset < addr + region_size) {
+            return (SectorInfo) {
+                .len = pfl->sector_len[i],
+                .num = sector_num + (offset - addr) / pfl->sector_len[i],
+            };
+        }
+        sector_num += pfl->nb_blocs[i];
+        addr += region_size;
+    }
+    abort();
+}
+
+/*
+ * Returns true if the offset refers to a flash sector that is currently being
+ * erased.
+ */
+static bool pflash_sector_is_erasing(PFlashCFI02 *pfl, hwaddr offset)
+{
+    long sector_num = pflash_sector_info(pfl, offset).num;
+    return test_bit(sector_num, pfl->sector_erase_map);
+}
+
+static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)
+{
+    PFlashCFI02 *pfl = opaque;
     hwaddr boff;
-    uint32_t ret;
-    uint8_t *p;
+    uint64_t ret;
 
     ret = -1;
-    trace_pflash_read(offset, pfl->cmd, width, pfl->wcycle);
     /* Lazy reset to ROMD mode after a certain amount of read accesses */
     if (!pfl->rom_mode && pfl->wcycle == 0 &&
         ++pfl->read_counter > PFLASH_LAZY_ROMD_THRESHOLD) {
@@ -153,10 +315,9 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,
     }
     offset &= pfl->chip_len - 1;
     boff = offset & 0xFF;
-    if (pfl->width == 2)
+    if (pfl->width == 2) {
         boff = boff >> 1;
-    else if (pfl->width == 4)
-        boff = boff >> 2;
+    }
     switch (pfl->cmd) {
     default:
         /* This should never happen : reset state & treat it as a read*/
@@ -164,45 +325,22 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,
         pfl->wcycle = 0;
         pfl->cmd = 0;
         /* fall through to the read code */
-    case 0x80:
+    case 0x80: /* Erase (unlock) */
         /* We accept reads during second unlock sequence... */
     case 0x00:
-    flash_read:
-        /* Flash area read */
-        p = pfl->storage;
-        switch (width) {
-        case 1:
-            ret = p[offset];
-            trace_pflash_data_read8(offset, ret);
-            break;
-        case 2:
-            if (be) {
-                ret = p[offset] << 8;
-                ret |= p[offset + 1];
-            } else {
-                ret = p[offset];
-                ret |= p[offset + 1] << 8;
-            }
-            trace_pflash_data_read16(offset, ret);
-            break;
-        case 4:
-            if (be) {
-                ret = p[offset] << 24;
-                ret |= p[offset + 1] << 16;
-                ret |= p[offset + 2] << 8;
-                ret |= p[offset + 3];
-            } else {
-                ret = p[offset];
-                ret |= p[offset + 1] << 8;
-                ret |= p[offset + 2] << 16;
-                ret |= p[offset + 3] << 24;
-            }
-            trace_pflash_data_read32(offset, ret);
+        if (pflash_erase_suspend_mode(pfl) &&
+            pflash_sector_is_erasing(pfl, offset)) {
+            /* Toggle bit 2, but not 6. */
+            toggle_dq2(pfl);
+            /* Status register read */
+            ret = pfl->status;
+            DPRINTF("%s: status %" PRIx64 "\n", __func__, ret);
             break;
         }
+        /* Flash area read */
+        ret = pflash_data_read(pfl, offset, width);
         break;
-    case 0x90:
-        /* flash ID read */
+    case 0x90: /* flash ID read */
         switch (boff) {
         case 0x00:
         case 0x01:
@@ -214,23 +352,25 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,
         case 0x0E:
         case 0x0F:
             ret = boff & 0x01 ? pfl->ident3 : pfl->ident2;
-            if (ret == (uint8_t)-1) {
-                goto flash_read;
+            if (ret != (uint8_t)-1) {
+                break;
             }
-            break;
+            /* Fall through to data read. */
         default:
-            goto flash_read;
+            ret = pflash_data_read(pfl, offset, width);
         }
-        DPRINTF("%s: ID " TARGET_FMT_plx " %x\n", __func__, boff, ret);
+        DPRINTF("%s: ID " TARGET_FMT_plx " %" PRIx64 "\n", __func__, boff, ret);
         break;
-    case 0xA0:
-    case 0x10:
-    case 0x30:
+    case 0x10: /* Chip Erase */
+    case 0x30: /* Sector Erase */
+        /* Toggle bit 2 during erase, but not program. */
+        toggle_dq2(pfl);
+    case 0xA0: /* Program */
+        /* Toggle bit 6 */
+        toggle_dq6(pfl);
         /* Status register read */
         ret = pfl->status;
-        DPRINTF("%s: status %x\n", __func__, ret);
-        /* Toggle bit 6 */
-        pfl->status ^= 0x40;
+        DPRINTF("%s: status %" PRIx64 "\n", __func__, ret);
         break;
     case 0x98:
         /* CFI query mode */
@@ -241,13 +381,13 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,
         }
         break;
     }
+    trace_pflash_io_read(offset, width, width << 1, ret, pfl->cmd, pfl->wcycle);
 
     return ret;
 }
 
 /* update flash content on disk */
-static void pflash_update(PFlashCFI02 *pfl, int offset,
-                          int size)
+static void pflash_update(PFlashCFI02 *pfl, int offset, int size)
 {
     int offset_end;
     if (pfl->blk) {
@@ -260,31 +400,56 @@ static void pflash_update(PFlashCFI02 *pfl, int offset,
     }
 }
 
-static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,
-                         uint32_t value, int width, int be)
+static void pflash_sector_erase(PFlashCFI02 *pfl, hwaddr offset)
 {
+    SectorInfo sector_info = pflash_sector_info(pfl, offset);
+    uint64_t sector_len = sector_info.len;
+    offset &= ~(sector_len - 1);
+    DPRINTF("%s: start sector erase at %0*" PRIx64 "-%0*" PRIx64 "\n",
+            __func__, pfl->width * 2, offset,
+            pfl->width * 2, offset + sector_len - 1);
+    if (!pfl->ro) {
+        uint8_t *p = pfl->storage;
+        memset(p + offset, 0xff, sector_len);
+        pflash_update(pfl, offset, sector_len);
+    }
+    set_dq7(pfl, 0x00);
+    ++pfl->sectors_to_erase;
+    set_bit(sector_info.num, pfl->sector_erase_map);
+    /* Set (or reset) the 50 us timer for additional erase commands.  */
+    timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 50000);
+}
+
+static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
+                         unsigned int width)
+{
+    PFlashCFI02 *pfl = opaque;
     hwaddr boff;
     uint8_t *p;
     uint8_t cmd;
 
+    trace_pflash_io_write(offset, width, width << 1, value, pfl->wcycle);
     cmd = value;
-    if (pfl->cmd != 0xA0 && cmd == 0xF0) {
-#if 0
-        DPRINTF("%s: flash reset asked (%02x %02x)\n",
-                __func__, pfl->cmd, cmd);
-#endif
-        goto reset_flash;
+    if (pfl->cmd != 0xA0) {
+        /* Reset does nothing during chip erase and sector erase. */
+        if (cmd == 0xF0 && pfl->cmd != 0x10 && pfl->cmd != 0x30) {
+            if (pfl->wcycle == WCYCLE_AUTOSELECT_CFI) {
+                /* Return to autoselect mode. */
+                pfl->wcycle = 3;
+                pfl->cmd = 0x90;
+                return;
+            }
+            goto reset_flash;
+        }
     }
-    trace_pflash_write(offset, value, width, pfl->wcycle);
     offset &= pfl->chip_len - 1;
 
-    DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d\n", __func__,
-            offset, value, width);
-    boff = offset & (pfl->sector_len - 1);
-    if (pfl->width == 2)
+    boff = offset;
+    if (pfl->width == 2) {
         boff = boff >> 1;
-    else if (pfl->width == 4)
-        boff = boff >> 2;
+    }
+    /* Only the least-significant 11 bits are used in most cases. */
+    boff &= 0x7FF;
     switch (pfl->wcycle) {
     case 0:
         /* Set the device in I/O access mode if required */
@@ -294,12 +459,30 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,
         /* We're in read mode */
     check_unlock0:
         if (boff == 0x55 && cmd == 0x98) {
-        enter_CFI_mode:
             /* Enter CFI query mode */
-            pfl->wcycle = 7;
+            pfl->wcycle = WCYCLE_CFI;
             pfl->cmd = 0x98;
             return;
         }
+        /* Handle erase resume in erase suspend mode, otherwise reset. */
+        if (cmd == 0x30) { /* Erase Resume */
+            if (pflash_erase_suspend_mode(pfl)) {
+                /* Resume the erase. */
+                timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
+                          pfl->erase_time_remaining);
+                pfl->erase_time_remaining = 0;
+                pfl->wcycle = 6;
+                pfl->cmd = 0x30;
+                set_dq7(pfl, 0x00);
+                assert_dq3(pfl);
+                return;
+            }
+            goto reset_flash;
+        }
+        /* Ignore erase suspend. */
+        if (cmd == 0xB0) { /* Erase Suspend */
+            return;
+        }
         if (boff != pfl->unlock_addr0 || cmd != 0xAA) {
             DPRINTF("%s: unlock0 failed " TARGET_FMT_plx " %02x %04x\n",
                     __func__, boff, cmd, pfl->unlock_addr0);
@@ -328,9 +511,9 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,
         case 0x20:
             pfl->bypass = 1;
             goto do_bypass;
-        case 0x80:
-        case 0x90:
-        case 0xA0:
+        case 0x80: /* Erase */
+        case 0x90: /* Autoselect */
+        case 0xA0: /* Program */
             pfl->cmd = cmd;
             DPRINTF("%s: starting command %02x\n", __func__, cmd);
             break;
@@ -341,57 +524,54 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,
         break;
     case 3:
         switch (pfl->cmd) {
-        case 0x80:
+        case 0x80: /* Erase */
             /* We need another unlock sequence */
             goto check_unlock0;
-        case 0xA0:
-            trace_pflash_data_write(offset, value, width, 0);
-            p = pfl->storage;
+        case 0xA0: /* Program */
+            if (pflash_erase_suspend_mode(pfl) &&
+                pflash_sector_is_erasing(pfl, offset)) {
+                /* Ignore writes to erasing sectors. */
+                if (pfl->bypass) {
+                    goto do_bypass;
+                }
+                goto reset_flash;
+            }
+            trace_pflash_data_write(offset, width << 1, value, 0);
             if (!pfl->ro) {
-                switch (width) {
-                case 1:
-                    p[offset] &= value;
-                    pflash_update(pfl, offset, 1);
-                    break;
-                case 2:
-                    if (be) {
-                        p[offset] &= value >> 8;
-                        p[offset + 1] &= value;
-                    } else {
-                        p[offset] &= value;
-                        p[offset + 1] &= value >> 8;
-                    }
-                    pflash_update(pfl, offset, 2);
-                    break;
-                case 4:
-                    if (be) {
-                        p[offset] &= value >> 24;
-                        p[offset + 1] &= value >> 16;
-                        p[offset + 2] &= value >> 8;
-                        p[offset + 3] &= value;
-                    } else {
-                        p[offset] &= value;
-                        p[offset + 1] &= value >> 8;
-                        p[offset + 2] &= value >> 16;
-                        p[offset + 3] &= value >> 24;
-                    }
-                    pflash_update(pfl, offset, 4);
-                    break;
+                p = (uint8_t *)pfl->storage + offset;
+                if (pfl->be) {
+                    uint64_t current = ldn_be_p(p, width);
+                    stn_be_p(p, width, current & value);
+                } else {
+                    uint64_t current = ldn_le_p(p, width);
+                    stn_le_p(p, width, current & value);
                 }
+                pflash_update(pfl, offset, width);
             }
-            pfl->status = 0x00 | ~(value & 0x80);
+            /*
+             * While programming, status bit DQ7 should hold the opposite
+             * value from how it was programmed.
+             */
+            set_dq7(pfl, ~value);
             /* Let's pretend write is immediate */
             if (pfl->bypass)
                 goto do_bypass;
             goto reset_flash;
-        case 0x90:
+        case 0x90: /* Autoselect */
             if (pfl->bypass && cmd == 0x00) {
                 /* Unlock bypass reset */
                 goto reset_flash;
             }
-            /* We can enter CFI query mode from autoselect mode */
-            if (boff == 0x55 && cmd == 0x98)
-                goto enter_CFI_mode;
+            /*
+             * We can enter CFI query mode from autoselect mode, but we must
+             * return to autoselect mode after a reset.
+             */
+            if (boff == 0x55 && cmd == 0x98) {
+                /* Enter autoselect CFI query mode */
+                pfl->wcycle = WCYCLE_AUTOSELECT_CFI;
+                pfl->cmd = 0x98;
+                return;
+            }
             /* No break here */
         default:
             DPRINTF("%s: invalid write for command %02x\n",
@@ -400,11 +580,11 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,
         }
     case 4:
         switch (pfl->cmd) {
-        case 0xA0:
+        case 0xA0: /* Program */
             /* Ignore writes while flash data write is occurring */
             /* As we suppose write is immediate, this should never happen */
             return;
-        case 0x80:
+        case 0x80: /* Erase */
             goto check_unlock1;
         default:
             /* Should never happen */
@@ -414,8 +594,12 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,
         }
         break;
     case 5:
+        if (pflash_erase_suspend_mode(pfl)) {
+            /* Erasing is not supported in erase suspend mode. */
+            goto reset_flash;
+        }
         switch (cmd) {
-        case 0x10:
+        case 0x10: /* Chip Erase */
             if (boff != pfl->unlock_addr0) {
                 DPRINTF("%s: chip erase: invalid address " TARGET_FMT_plx "\n",
                         __func__, offset);
@@ -424,28 +608,16 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,
             /* Chip erase */
             DPRINTF("%s: start chip erase\n", __func__);
             if (!pfl->ro) {
-                memset(pfl->storage, 0xFF, pfl->chip_len);
+                memset(pfl->storage, 0xff, pfl->chip_len);
                 pflash_update(pfl, 0, pfl->chip_len);
             }
-            pfl->status = 0x00;
-            /* Let's wait 5 seconds before chip erase is done */
+            set_dq7(pfl, 0x00);
+            /* Wait the time specified at CFI address 0x22. */
             timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
-                      (NANOSECONDS_PER_SECOND * 5));
+                      (1ULL << pfl->cfi_table[0x22]) * SCALE_MS);
             break;
-        case 0x30:
-            /* Sector erase */
-            p = pfl->storage;
-            offset &= ~(pfl->sector_len - 1);
-            DPRINTF("%s: start sector erase at " TARGET_FMT_plx "\n", __func__,
-                    offset);
-            if (!pfl->ro) {
-                memset(p + offset, 0xFF, pfl->sector_len);
-                pflash_update(pfl, offset, pfl->sector_len);
-            }
-            pfl->status = 0x00;
-            /* Let's wait 1/2 second before sector erase is done */
-            timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
-                      (NANOSECONDS_PER_SECOND / 2));
+        case 0x30: /* Sector erase */
+            pflash_sector_erase(pfl, offset);
             break;
         default:
             DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd);
@@ -455,11 +627,47 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,
         break;
     case 6:
         switch (pfl->cmd) {
-        case 0x10:
+        case 0x10: /* Chip Erase */
             /* Ignore writes during chip erase */
             return;
-        case 0x30:
-            /* Ignore writes during sector erase */
+        case 0x30: /* Sector erase */
+            if (cmd == 0xB0) {
+                /*
+                 * If erase suspend happens during the erase timeout (so DQ3 is
+                 * 0), then the device suspends erasing immediately. Set the
+                 * remaining time to be the total time to erase. Otherwise,
+                 * there is a maximum amount of time it can take to enter
+                 * suspend mode. Let's ignore that and suspend immediately and
+                 * set the remaining time to the actual time remaining on the
+                 * timer.
+                 */
+                if ((pfl->status & 0x08) == 0) {
+                    pfl->erase_time_remaining = pflash_erase_time(pfl);
+                } else {
+                    int64_t delta = timer_expire_time_ns(&pfl->timer) -
+                        qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+                    /* Make sure we have a positive time remaining. */
+                    pfl->erase_time_remaining = delta <= 0 ? 1 : delta;
+                }
+                reset_dq3(pfl);
+                timer_del(&pfl->timer);
+                pfl->wcycle = 0;
+                pfl->cmd = 0;
+                return;
+            }
+            /*
+             * If DQ3 is 0, additional sector erase commands can be
+             * written and anything else (other than an erase suspend) resets
+             * the device.
+             */
+            if ((pfl->status & 0x08) == 0) {
+                if (cmd == 0x30) {
+                    pflash_sector_erase(pfl, offset);
+                } else {
+                    goto reset_flash;
+                }
+            }
+            /* Ignore writes during the actual erase. */
             return;
         default:
             /* Should never happen */
@@ -468,7 +676,9 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,
             goto reset_flash;
         }
         break;
-    case 7: /* Special value for CFI queries */
+    /* Special values for CFI queries */
+    case WCYCLE_CFI:
+    case WCYCLE_AUTOSELECT_CFI:
         DPRINTF("%s: invalid write in CFI query mode\n", __func__);
         goto reset_flash;
     default:
@@ -493,39 +703,10 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,
     pfl->cmd = 0;
 }
 
-static uint64_t pflash_be_readfn(void *opaque, hwaddr addr, unsigned size)
-{
-    return pflash_read(opaque, addr, size, 1);
-}
-
-static void pflash_be_writefn(void *opaque, hwaddr addr,
-                              uint64_t value, unsigned size)
-{
-    pflash_write(opaque, addr, value, size, 1);
-}
-
-static uint64_t pflash_le_readfn(void *opaque, hwaddr addr, unsigned size)
-{
-    return pflash_read(opaque, addr, size, 0);
-}
-
-static void pflash_le_writefn(void *opaque, hwaddr addr,
-                              uint64_t value, unsigned size)
-{
-    pflash_write(opaque, addr, value, size, 0);
-}
-
-static const MemoryRegionOps pflash_cfi02_ops_be = {
-    .read = pflash_be_readfn,
-    .write = pflash_be_writefn,
-    .valid.min_access_size = 1,
-    .valid.max_access_size = 4,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static const MemoryRegionOps pflash_cfi02_ops_le = {
-    .read = pflash_le_readfn,
-    .write = pflash_le_writefn,
+static const MemoryRegionOps pflash_cfi02_ops = {
+    .read = pflash_read,
+    .write = pflash_write,
+    .impl.max_access_size = 2,
     .valid.min_access_size = 1,
     .valid.max_access_size = 4,
     .endianness = DEVICE_NATIVE_ENDIAN,
@@ -534,15 +715,14 @@ static const MemoryRegionOps pflash_cfi02_ops_le = {
 static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
 {
     PFlashCFI02 *pfl = PFLASH_CFI02(dev);
-    uint32_t chip_len;
     int ret;
     Error *local_err = NULL;
 
-    if (pfl->sector_len == 0) {
+    if (pfl->uniform_sector_len == 0 && pfl->sector_len[0] == 0) {
         error_setg(errp, "attribute \"sector-length\" not specified or zero.");
         return;
     }
-    if (pfl->nb_blocs == 0) {
+    if (pfl->uniform_nb_blocs == 0 && pfl->nb_blocs[0] == 0) {
         error_setg(errp, "attribute \"num-blocks\" not specified or zero.");
         return;
     }
@@ -551,18 +731,64 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
         return;
     }
 
-    chip_len = pfl->sector_len * pfl->nb_blocs;
+    int nb_regions;
+    pfl->chip_len = 0;
+    pfl->total_sectors = 0;
+    for (nb_regions = 0; nb_regions < PFLASH_MAX_ERASE_REGIONS; ++nb_regions) {
+        if (pfl->nb_blocs[nb_regions] == 0) {
+            break;
+        }
+        pfl->total_sectors += pfl->nb_blocs[nb_regions];
+        uint64_t sector_len_per_device = pfl->sector_len[nb_regions];
+
+        /*
+         * The size of each flash sector must be a power of 2 and it must be
+         * aligned at the same power of 2.
+         */
+        if (sector_len_per_device & 0xff ||
+            sector_len_per_device >= (1 << 24) ||
+            !is_power_of_2(sector_len_per_device))
+        {
+            error_setg(errp, "unsupported configuration: "
+                       "sector length[%d] per device = %" PRIx64 ".",
+                       nb_regions, sector_len_per_device);
+            return;
+        }
+        if (pfl->chip_len & (sector_len_per_device - 1)) {
+            error_setg(errp, "unsupported configuration: "
+                       "flash region %d not correctly aligned.",
+                       nb_regions);
+            return;
+        }
+
+        pfl->chip_len += (uint64_t)pfl->sector_len[nb_regions] *
+                          pfl->nb_blocs[nb_regions];
+    }
+
+    uint64_t uniform_len = (uint64_t)pfl->uniform_nb_blocs *
+                           pfl->uniform_sector_len;
+    if (nb_regions == 0) {
+        nb_regions = 1;
+        pfl->nb_blocs[0] = pfl->uniform_nb_blocs;
+        pfl->sector_len[0] = pfl->uniform_sector_len;
+        pfl->chip_len = uniform_len;
+        pfl->total_sectors = pfl->uniform_nb_blocs;
+    } else if (uniform_len != 0 && uniform_len != pfl->chip_len) {
+        error_setg(errp, "\"num-blocks\"*\"sector-length\" "
+                   "different from \"num-blocks0\"*\'sector-length0\" + ... + "
+                   "\"num-blocks3\"*\"sector-length3\"");
+        return;
+    }
 
-    memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl), pfl->be ?
-                                  &pflash_cfi02_ops_be : &pflash_cfi02_ops_le,
-                                  pfl, pfl->name, chip_len, &local_err);
+    memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl),
+                                  &pflash_cfi02_ops, pfl, pfl->name,
+                                  pfl->chip_len, &local_err);
     if (local_err) {
         error_propagate(errp, local_err);
         return;
     }
 
     pfl->storage = memory_region_get_ram_ptr(&pfl->orig_mem);
-    pfl->chip_len = chip_len;
 
     if (pfl->blk) {
         uint64_t perm;
@@ -577,13 +803,20 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
     }
 
     if (pfl->blk) {
-        if (!blk_check_size_and_read_all(pfl->blk, pfl->storage, chip_len,
-                                         errp)) {
+        if (!blk_check_size_and_read_all(pfl->blk, pfl->storage,
+                                         pfl->chip_len, errp)) {
             vmstate_unregister_ram(&pfl->orig_mem, DEVICE(pfl));
             return;
         }
     }
 
+    /* Only 11 bits are used in the comparison. */
+    pfl->unlock_addr0 &= 0x7FF;
+    pfl->unlock_addr1 &= 0x7FF;
+
+    /* Allocate memory for a bitmap for sectors being erased. */
+    pfl->sector_erase_map = bitmap_new(pfl->total_sectors);
+
     pflash_setup_mappings(pfl);
     pfl->rom_mode = 1;
     sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem);
@@ -592,7 +825,9 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
     pfl->wcycle = 0;
     pfl->cmd = 0;
     pfl->status = 0;
+
     /* Hardcoded CFI table (mostly from SG29 Spansion flash) */
+    const uint16_t pri_ofs = 0x40;
     /* Standard "QRY" string */
     pfl->cfi_table[0x10] = 'Q';
     pfl->cfi_table[0x11] = 'R';
@@ -601,8 +836,8 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
     pfl->cfi_table[0x13] = 0x02;
     pfl->cfi_table[0x14] = 0x00;
     /* Primary extended table address */
-    pfl->cfi_table[0x15] = 0x31;
-    pfl->cfi_table[0x16] = 0x00;
+    pfl->cfi_table[0x15] = pri_ofs;
+    pfl->cfi_table[0x16] = pri_ofs >> 8;
     /* Alternate command set (none) */
     pfl->cfi_table[0x17] = 0x00;
     pfl->cfi_table[0x18] = 0x00;
@@ -617,7 +852,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
     pfl->cfi_table[0x1D] = 0x00;
     /* Vpp max (no Vpp pin) */
     pfl->cfi_table[0x1E] = 0x00;
-    /* Reserved */
+    /* Timeout per single byte/word write (128 ms) */
     pfl->cfi_table[0x1F] = 0x07;
     /* Timeout for min size buffer write (NA) */
     pfl->cfi_table[0x20] = 0x00;
@@ -634,7 +869,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
     /* Max timeout for chip erase */
     pfl->cfi_table[0x26] = 0x0D;
     /* Device size */
-    pfl->cfi_table[0x27] = ctz32(chip_len);
+    pfl->cfi_table[0x27] = ctz32(pfl->chip_len);
     /* Flash device interface (8 & 16 bits) */
     pfl->cfi_table[0x28] = 0x02;
     pfl->cfi_table[0x29] = 0x00;
@@ -643,37 +878,60 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
     //    pfl->cfi_table[0x2A] = 0x05;
     pfl->cfi_table[0x2A] = 0x00;
     pfl->cfi_table[0x2B] = 0x00;
-    /* Number of erase block regions (uniform) */
-    pfl->cfi_table[0x2C] = 0x01;
-    /* Erase block region 1 */
-    pfl->cfi_table[0x2D] = pfl->nb_blocs - 1;
-    pfl->cfi_table[0x2E] = (pfl->nb_blocs - 1) >> 8;
-    pfl->cfi_table[0x2F] = pfl->sector_len >> 8;
-    pfl->cfi_table[0x30] = pfl->sector_len >> 16;
+    /* Number of erase block regions */
+    pfl->cfi_table[0x2c] = nb_regions;
+    /* Erase block regions */
+    for (int i = 0; i < nb_regions; ++i) {
+        uint32_t sector_len_per_device = pfl->sector_len[i];
+        pfl->cfi_table[0x2d + 4 * i] = pfl->nb_blocs[i] - 1;
+        pfl->cfi_table[0x2e + 4 * i] = (pfl->nb_blocs[i] - 1) >> 8;
+        pfl->cfi_table[0x2f + 4 * i] = sector_len_per_device >> 8;
+        pfl->cfi_table[0x30 + 4 * i] = sector_len_per_device >> 16;
+    }
+    assert(0x2c + 4 * nb_regions < pri_ofs);
 
     /* Extended */
-    pfl->cfi_table[0x31] = 'P';
-    pfl->cfi_table[0x32] = 'R';
-    pfl->cfi_table[0x33] = 'I';
-
-    pfl->cfi_table[0x34] = '1';
-    pfl->cfi_table[0x35] = '0';
-
-    pfl->cfi_table[0x36] = 0x00;
-    pfl->cfi_table[0x37] = 0x00;
-    pfl->cfi_table[0x38] = 0x00;
-    pfl->cfi_table[0x39] = 0x00;
-
-    pfl->cfi_table[0x3a] = 0x00;
-
-    pfl->cfi_table[0x3b] = 0x00;
-    pfl->cfi_table[0x3c] = 0x00;
+    pfl->cfi_table[0x00 + pri_ofs] = 'P';
+    pfl->cfi_table[0x01 + pri_ofs] = 'R';
+    pfl->cfi_table[0x02 + pri_ofs] = 'I';
+
+    /* Extended version 1.0 */
+    pfl->cfi_table[0x03 + pri_ofs] = '1';
+    pfl->cfi_table[0x04 + pri_ofs] = '0';
+
+    /* Address sensitive unlock required. */
+    pfl->cfi_table[0x05 + pri_ofs] = 0x00;
+    /* Erase suspend to read/write. */
+    pfl->cfi_table[0x06 + pri_ofs] = 0x02;
+    /* Sector protect not supported. */
+    pfl->cfi_table[0x07 + pri_ofs] = 0x00;
+    /* Temporary sector unprotect not supported. */
+    pfl->cfi_table[0x08 + pri_ofs] = 0x00;
+
+    /* Sector protect/unprotect scheme. */
+    pfl->cfi_table[0x09 + pri_ofs] = 0x00;
+
+    /* Simultaneous operation not supported. */
+    pfl->cfi_table[0x0a + pri_ofs] = 0x00;
+    /* Burst mode not supported. */
+    pfl->cfi_table[0x0b + pri_ofs] = 0x00;
+    /* Page mode not supported. */
+    pfl->cfi_table[0x0c + pri_ofs] = 0x00;
+    assert(0x0c + pri_ofs < ARRAY_SIZE(pfl->cfi_table));
 }
 
 static Property pflash_cfi02_properties[] = {
     DEFINE_PROP_DRIVE("drive", PFlashCFI02, blk),
-    DEFINE_PROP_UINT32("num-blocks", PFlashCFI02, nb_blocs, 0),
-    DEFINE_PROP_UINT32("sector-length", PFlashCFI02, sector_len, 0),
+    DEFINE_PROP_UINT32("num-blocks", PFlashCFI02, uniform_nb_blocs, 0),
+    DEFINE_PROP_UINT32("sector-length", PFlashCFI02, uniform_sector_len, 0),
+    DEFINE_PROP_UINT32("num-blocks0", PFlashCFI02, nb_blocs[0], 0),
+    DEFINE_PROP_UINT32("sector-length0", PFlashCFI02, sector_len[0], 0),
+    DEFINE_PROP_UINT32("num-blocks1", PFlashCFI02, nb_blocs[1], 0),
+    DEFINE_PROP_UINT32("sector-length1", PFlashCFI02, sector_len[1], 0),
+    DEFINE_PROP_UINT32("num-blocks2", PFlashCFI02, nb_blocs[2], 0),
+    DEFINE_PROP_UINT32("sector-length2", PFlashCFI02, sector_len[2], 0),
+    DEFINE_PROP_UINT32("num-blocks3", PFlashCFI02, nb_blocs[3], 0),
+    DEFINE_PROP_UINT32("sector-length3", PFlashCFI02, sector_len[3], 0),
     DEFINE_PROP_UINT8("width", PFlashCFI02, width, 0),
     DEFINE_PROP_UINT8("mappings", PFlashCFI02, mappings, 0),
     DEFINE_PROP_UINT8("big-endian", PFlashCFI02, be, 0),
@@ -691,6 +949,7 @@ static void pflash_cfi02_unrealize(DeviceState *dev, Error **errp)
 {
     PFlashCFI02 *pfl = PFLASH_CFI02(dev);
     timer_del(&pfl->timer);
+    g_free(pfl->sector_erase_map);
 }
 
 static void pflash_cfi02_class_init(ObjectClass *klass, void *data)
diff --git a/hw/block/trace-events b/hw/block/trace-events
index 97a1783..13d1b21 100644
--- a/hw/block/trace-events
+++ b/hw/block/trace-events
@@ -7,13 +7,11 @@ fdc_ioport_write(uint8_t reg, uint8_t value) "write reg 0x%02x val 0x%02x"
 # pflash_cfi02.c
 # pflash_cfi01.c
 pflash_reset(void) "reset"
-pflash_read(uint64_t offset, uint8_t cmd, int width, uint8_t wcycle) "offset:0x%04"PRIx64" cmd:0x%02x width:%d wcycle:%u"
-pflash_write(uint64_t offset, uint32_t value, int width, uint8_t wcycle) "offset:0x%04"PRIx64" value:0x%03x width:%d wcycle:%u"
 pflash_timer_expired(uint8_t cmd) "command 0x%02x done"
-pflash_data_read8(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%02x"
-pflash_data_read16(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%04x"
-pflash_data_read32(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%08x"
-pflash_data_write(uint64_t offset, uint32_t value, int width, uint64_t counter) "data offset:0x%04"PRIx64" value:0x%08x width:%d counter:0x%016"PRIx64
+pflash_io_read(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x cmd:0x%02x wcycle:%u"
+pflash_io_write(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x wcycle:%u"
+pflash_data_read(uint64_t offset, int width, uint32_t value) "data offset:0x%04"PRIx64" value:0x%0*x"
+pflash_data_write(uint64_t offset, int width, uint32_t value, uint64_t counter) "data offset:0x%04"PRIx64" value:0x%0*x counter:0x%016"PRIx64
 pflash_manufacturer_id(uint16_t id) "Read Manufacturer ID: 0x%04x"
 pflash_device_id(uint16_t id) "Read Device ID: 0x%04x"
 pflash_device_info(uint64_t offset) "Read Device Information offset:0x%04"PRIx64
diff --git a/tests/Makefile.include b/tests/Makefile.include
index db750dd..d02132f 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -260,6 +260,7 @@ check-qtest-arm-y += tests/m25p80-test$(EXESUF)
 check-qtest-arm-y += tests/test-arm-mptimer$(EXESUF)
 check-qtest-arm-y += tests/boot-serial-test$(EXESUF)
 check-qtest-arm-y += tests/hexloader-test$(EXESUF)
+check-qtest-arm-$(CONFIG_PFLASH_CFI02) += tests/pflash-cfi02-test$(EXESUF)
 
 check-qtest-aarch64-y = tests/numa-test$(EXESUF)
 check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF)
@@ -767,6 +768,7 @@ tests/device-introspect-test$(EXESUF): tests/device-introspect-test.o
 tests/rtc-test$(EXESUF): tests/rtc-test.o
 tests/m48t59-test$(EXESUF): tests/m48t59-test.o
 tests/hexloader-test$(EXESUF): tests/hexloader-test.o
+tests/pflash-cfi02$(EXESUF): tests/pflash-cfi02-test.o
 tests/endianness-test$(EXESUF): tests/endianness-test.o
 tests/prom-env-test$(EXESUF): tests/prom-env-test.o $(libqos-obj-y)
 tests/rtas-test$(EXESUF): tests/rtas-test.o $(libqos-spapr-obj-y)
diff --git a/tests/pflash-cfi02-test.c b/tests/pflash-cfi02-test.c
new file mode 100644
index 0000000..d3b23f4
--- /dev/null
+++ b/tests/pflash-cfi02-test.c
@@ -0,0 +1,681 @@
+/*
+ * QTest testcase for parallel flash with AMD command set
+ *
+ * Copyright (c) 2019 Stephen Checkoway
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest.h"
+
+/*
+ * To test the pflash_cfi02 device, we run QEMU with the musicpal machine with
+ * a pflash drive. This enables us to test some flash configurations, but not
+ * all. In particular, we're limited to a 16-bit wide flash device.
+ */
+
+#define MP_FLASH_SIZE_MAX (32 * 1024 * 1024)
+#define BASE_ADDR (0x100000000ULL - MP_FLASH_SIZE_MAX)
+
+#define UNIFORM_FLASH_SIZE (8 * 1024 * 1024)
+#define UNIFORM_FLASH_SECTOR_SIZE (64 * 1024)
+
+/* Use a newtype to keep flash addresses separate from byte addresses. */
+typedef struct {
+    uint64_t addr;
+} faddr;
+#define FLASH_ADDR(x) ((faddr) { .addr = (x) })
+
+#define CFI_ADDR FLASH_ADDR(0x55)
+#define UNLOCK0_ADDR FLASH_ADDR(0x555)
+#define UNLOCK1_ADDR FLASH_ADDR(0x2AA)
+
+#define CFI_CMD 0x98
+#define UNLOCK0_CMD 0xAA
+#define UNLOCK1_CMD 0x55
+#define SECOND_UNLOCK_CMD 0x80
+#define AUTOSELECT_CMD 0x90
+#define RESET_CMD 0xF0
+#define PROGRAM_CMD 0xA0
+#define SECTOR_ERASE_CMD 0x30
+#define CHIP_ERASE_CMD 0x10
+#define UNLOCK_BYPASS_CMD 0x20
+#define UNLOCK_BYPASS_RESET_CMD 0x00
+#define ERASE_SUSPEND_CMD 0xB0
+#define ERASE_RESUME_CMD SECTOR_ERASE_CMD
+
+typedef struct {
+    int bank_width;
+
+    /* Nonuniform block size. */
+    int nb_blocs[4];
+    int sector_len[4];
+
+    QTestState *qtest;
+} FlashConfig;
+
+static char image_path[] = "/tmp/qtest.XXXXXX";
+
+/*
+ * The pflash implementation allows some parameters to be unspecified. We want
+ * to test those configurations but we also need to know the real values in
+ * our testing code. So after we launch qemu, we'll need a new FlashConfig
+ * with the correct values filled in.
+ */
+static FlashConfig expand_config_defaults(const FlashConfig *c)
+{
+    FlashConfig ret = *c;
+
+    if (ret.bank_width == 0) {
+        ret.bank_width = 2;
+    }
+    if (ret.nb_blocs[0] == 0 && ret.sector_len[0] == 0) {
+        ret.sector_len[0] = UNIFORM_FLASH_SECTOR_SIZE;
+        ret.nb_blocs[0] = UNIFORM_FLASH_SIZE / UNIFORM_FLASH_SECTOR_SIZE;
+    }
+
+    /* XXX: Limitations of test harness. */
+    assert(ret.bank_width == 2);
+    return ret;
+}
+
+/*
+ * Return a bit mask suitable for extracting the least significant
+ * status/query response from an interleaved response.
+ */
+static inline uint64_t device_mask(const FlashConfig *c)
+{
+    return (uint64_t)-1;
+}
+
+/*
+ * Return a bit mask exactly as long as the bank_width.
+ */
+static inline uint64_t bank_mask(const FlashConfig *c)
+{
+    if (c->bank_width == 8) {
+        return (uint64_t)-1;
+    }
+    return (1ULL << (c->bank_width * 8)) - 1ULL;
+}
+
+static inline void flash_write(const FlashConfig *c, uint64_t byte_addr,
+                               uint64_t data)
+{
+    /* Sanity check our tests. */
+    assert((data & ~bank_mask(c)) == 0);
+    uint64_t addr = BASE_ADDR + byte_addr;
+    switch (c->bank_width) {
+    case 1:
+        qtest_writeb(c->qtest, addr, data);
+        break;
+    case 2:
+        qtest_writew(c->qtest, addr, data);
+        break;
+    case 4:
+        qtest_writel(c->qtest, addr, data);
+        break;
+    case 8:
+        qtest_writeq(c->qtest, addr, data);
+        break;
+    default:
+        abort();
+    }
+}
+
+static inline uint64_t flash_read(const FlashConfig *c, uint64_t byte_addr)
+{
+    uint64_t addr = BASE_ADDR + byte_addr;
+    switch (c->bank_width) {
+    case 1:
+        return qtest_readb(c->qtest, addr);
+    case 2:
+        return qtest_readw(c->qtest, addr);
+    case 4:
+        return qtest_readl(c->qtest, addr);
+    case 8:
+        return qtest_readq(c->qtest, addr);
+    default:
+        abort();
+    }
+}
+
+/*
+ * Convert a flash address expressed in the maximum width of the device as a
+ * byte address.
+ */
+static inline uint64_t as_byte_addr(const FlashConfig *c, faddr flash_addr)
+{
+    /*
+     * Command addresses are always given as addresses in the maximum
+     * supported bus size for the flash chip. So an x8/x16 chip in x8 mode
+     * uses addresses 0xAAA and 0x555 to unlock because the least significant
+     * bit is ignored. (0x555 rather than 0x554 is traditional.)
+     *
+     * In general we need to multiply by the maximum device width.
+     */
+    return flash_addr.addr * c->bank_width;
+}
+
+/*
+ * Return the command value or expected status replicated across all devices.
+ */
+static inline uint64_t replicate(const FlashConfig *c, uint64_t data)
+{
+    /* Sanity check our tests. */
+    assert((data & ~device_mask(c)) == 0);
+    return data;
+}
+
+static inline void flash_cmd(const FlashConfig *c, faddr cmd_addr,
+                             uint8_t cmd)
+{
+    flash_write(c, as_byte_addr(c, cmd_addr), replicate(c, cmd));
+}
+
+static inline uint64_t flash_query(const FlashConfig *c, faddr query_addr)
+{
+    return flash_read(c, as_byte_addr(c, query_addr));
+}
+
+static inline uint64_t flash_query_1(const FlashConfig *c, faddr query_addr)
+{
+    return flash_query(c, query_addr) & device_mask(c);
+}
+
+static void unlock(const FlashConfig *c)
+{
+    flash_cmd(c, UNLOCK0_ADDR, UNLOCK0_CMD);
+    flash_cmd(c, UNLOCK1_ADDR, UNLOCK1_CMD);
+}
+
+static void reset(const FlashConfig *c)
+{
+    flash_cmd(c, FLASH_ADDR(0), RESET_CMD);
+}
+
+static void sector_erase(const FlashConfig *c, uint64_t byte_addr)
+{
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, SECOND_UNLOCK_CMD);
+    unlock(c);
+    flash_write(c, byte_addr, replicate(c, SECTOR_ERASE_CMD));
+}
+
+static void wait_for_completion(const FlashConfig *c, uint64_t byte_addr)
+{
+    /* If DQ6 is toggling, step the clock and ensure the toggle stops. */
+    const uint64_t dq6 = replicate(c, 0x40);
+    if ((flash_read(c, byte_addr) & dq6) ^ (flash_read(c, byte_addr) & dq6)) {
+        /* Wait for erase or program to finish. */
+        qtest_clock_step_next(c->qtest);
+        /* Ensure that DQ6 has stopped toggling. */
+        g_assert_cmphex(flash_read(c, byte_addr), ==, flash_read(c, byte_addr));
+    }
+}
+
+static void bypass_program(const FlashConfig *c, uint64_t byte_addr,
+                           uint16_t data)
+{
+    flash_cmd(c, UNLOCK0_ADDR, PROGRAM_CMD);
+    flash_write(c, byte_addr, data);
+    /*
+     * Data isn't valid until DQ6 stops toggling. We don't model this as
+     * writes are immediate, but if this changes in the future, we can wait
+     * until the program is complete.
+     */
+    wait_for_completion(c, byte_addr);
+}
+
+static void program(const FlashConfig *c, uint64_t byte_addr, uint16_t data)
+{
+    unlock(c);
+    bypass_program(c, byte_addr, data);
+}
+
+static void chip_erase(const FlashConfig *c)
+{
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, SECOND_UNLOCK_CMD);
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, CHIP_ERASE_CMD);
+}
+
+static void erase_suspend(const FlashConfig *c)
+{
+    flash_cmd(c, FLASH_ADDR(0), ERASE_SUSPEND_CMD);
+}
+
+static void erase_resume(const FlashConfig *c)
+{
+    flash_cmd(c, FLASH_ADDR(0), ERASE_RESUME_CMD);
+}
+
+/*
+ * Test flash commands with a variety of device geometry.
+ */
+static void test_geometry(const void *opaque)
+{
+    const FlashConfig *config = opaque;
+    QTestState *qtest;
+    qtest = qtest_initf("-M musicpal,accel=qtest"
+                        " -drive if=pflash,file=%s,format=raw,copy-on-read"
+                        /* Device geometry properties. */
+                        " -global driver=cfi.pflash02,"
+                        "property=num-blocks0,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=sector-length0,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=num-blocks1,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=sector-length1,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=num-blocks2,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=sector-length2,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=num-blocks3,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=sector-length3,value=%d",
+                        image_path,
+                        config->nb_blocs[0],
+                        config->sector_len[0],
+                        config->nb_blocs[1],
+                        config->sector_len[1],
+                        config->nb_blocs[2],
+                        config->sector_len[2],
+                        config->nb_blocs[3],
+                        config->sector_len[3]);
+    FlashConfig explicit_config = expand_config_defaults(config);
+    explicit_config.qtest = qtest;
+    const FlashConfig *c = &explicit_config;
+
+    /* Check the IDs. */
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, AUTOSELECT_CMD);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
+    if (c->bank_width >= 2) {
+        /*
+         * XXX: The ID returned by the musicpal flash chip is 16 bits which
+         * wouldn't happen with an 8-bit device. It would probably be best to
+         * prohibit addresses larger than the device width in pflash_cfi02.c,
+         * but then we couldn't test smaller device widths at all.
+         */
+        g_assert_cmphex(flash_query(c, FLASH_ADDR(1)), ==,
+                        replicate(c, 0x236D));
+    }
+    reset(c);
+
+    /* Check the erase blocks. */
+    flash_cmd(c, CFI_ADDR, CFI_CMD);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x10)), ==, replicate(c, 'Q'));
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x11)), ==, replicate(c, 'R'));
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x12)), ==, replicate(c, 'Y'));
+
+    /* Num erase regions. */
+    int nb_erase_regions = flash_query_1(c, FLASH_ADDR(0x2C));
+    g_assert_cmphex(nb_erase_regions, ==,
+                    !!c->nb_blocs[0] + !!c->nb_blocs[1] + !!c->nb_blocs[2] +
+                    !!c->nb_blocs[3]);
+
+    /* Check device length. */
+    uint32_t device_len = 1 << flash_query_1(c, FLASH_ADDR(0x27));
+    g_assert_cmphex(device_len, ==, UNIFORM_FLASH_SIZE);
+
+    /* Check that erase suspend to read/write is supported. */
+    uint16_t pri = flash_query_1(c, FLASH_ADDR(0x15)) +
+                   (flash_query_1(c, FLASH_ADDR(0x16)) << 8);
+    g_assert_cmpint(pri, >=, 0x2D + 4 * nb_erase_regions);
+    g_assert_cmpint(flash_query(c, FLASH_ADDR(pri + 0)), ==, replicate(c, 'P'));
+    g_assert_cmpint(flash_query(c, FLASH_ADDR(pri + 1)), ==, replicate(c, 'R'));
+    g_assert_cmpint(flash_query(c, FLASH_ADDR(pri + 2)), ==, replicate(c, 'I'));
+    g_assert_cmpint(flash_query_1(c, FLASH_ADDR(pri + 6)), ==, 2); /* R/W */
+    reset(c);
+
+    const uint64_t dq7 = replicate(c, 0x80);
+    const uint64_t dq6 = replicate(c, 0x40);
+    const uint64_t dq3 = replicate(c, 0x08);
+    const uint64_t dq2 = replicate(c, 0x04);
+
+    uint64_t byte_addr = 0;
+    for (int region = 0; region < nb_erase_regions; ++region) {
+        uint64_t base = 0x2D + 4 * region;
+        flash_cmd(c, CFI_ADDR, CFI_CMD);
+        uint32_t nb_sectors = flash_query_1(c, FLASH_ADDR(base + 0)) +
+                              (flash_query_1(c, FLASH_ADDR(base + 1)) << 8) + 1;
+        uint32_t sector_len = (flash_query_1(c, FLASH_ADDR(base + 2)) << 8) +
+                              (flash_query_1(c, FLASH_ADDR(base + 3)) << 16);
+        g_assert_cmphex(nb_sectors, ==, c->nb_blocs[region]);
+        g_assert_cmphex(sector_len, ==, c->sector_len[region]);
+        reset(c);
+
+        /* Erase and program sector. */
+        for (uint32_t i = 0; i < nb_sectors; ++i) {
+            sector_erase(c, byte_addr);
+
+            /* Check that DQ3 is 0. */
+            g_assert_cmphex(flash_read(c, byte_addr) & dq3, ==, 0);
+            qtest_clock_step_next(c->qtest); /* Step over the 50 us timeout. */
+
+            /* Check that DQ3 is 1. */
+            uint64_t status0 = flash_read(c, byte_addr);
+            g_assert_cmphex(status0 & dq3, ==, dq3);
+
+            /* DQ7 is 0 during an erase. */
+            g_assert_cmphex(status0 & dq7, ==, 0);
+            uint64_t status1 = flash_read(c, byte_addr);
+
+            /* DQ6 toggles during an erase. */
+            g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6);
+
+            /* Wait for erase to complete. */
+            wait_for_completion(c, byte_addr);
+
+            /* Ensure DQ6 has stopped toggling. */
+            g_assert_cmphex(flash_read(c, byte_addr), ==,
+                            flash_read(c, byte_addr));
+
+            /* Now the data should be valid. */
+            g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c));
+
+            /* Program a bit pattern. */
+            program(c, byte_addr, 0x55);
+            g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x55);
+            program(c, byte_addr, 0xA5);
+            g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x05);
+            byte_addr += sector_len;
+        }
+    }
+
+    /* Erase the chip. */
+    chip_erase(c);
+    /* Read toggle. */
+    uint64_t status0 = flash_read(c, 0);
+    /* DQ7 is 0 during an erase. */
+    g_assert_cmphex(status0 & dq7, ==, 0);
+    uint64_t status1 = flash_read(c, 0);
+    /* DQ6 toggles during an erase. */
+    g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6);
+    /* Wait for erase to complete. */
+    qtest_clock_step_next(c->qtest);
+    /* Ensure DQ6 has stopped toggling. */
+    g_assert_cmphex(flash_read(c, 0), ==, flash_read(c, 0));
+    /* Now the data should be valid. */
+
+    for (int region = 0; region < nb_erase_regions; ++region) {
+        for (uint32_t i = 0; i < c->nb_blocs[region]; ++i) {
+            uint64_t byte_addr = i * c->sector_len[region];
+            g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c));
+        }
+    }
+
+    /* Unlock bypass */
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, UNLOCK_BYPASS_CMD);
+    bypass_program(c, 0 * c->bank_width, 0x01);
+    bypass_program(c, 1 * c->bank_width, 0x23);
+    bypass_program(c, 2 * c->bank_width, 0x45);
+    /*
+     * Test that bypass programming, unlike normal programming can use any
+     * address for the PROGRAM_CMD.
+     */
+    flash_cmd(c, FLASH_ADDR(3 * c->bank_width), PROGRAM_CMD);
+    flash_write(c, 3 * c->bank_width, 0x67);
+    wait_for_completion(c, 3 * c->bank_width);
+    flash_cmd(c, FLASH_ADDR(0), UNLOCK_BYPASS_RESET_CMD);
+    bypass_program(c, 4 * c->bank_width, 0x89); /* Should fail. */
+    g_assert_cmphex(flash_read(c, 0 * c->bank_width), ==, 0x01);
+    g_assert_cmphex(flash_read(c, 1 * c->bank_width), ==, 0x23);
+    g_assert_cmphex(flash_read(c, 2 * c->bank_width), ==, 0x45);
+    g_assert_cmphex(flash_read(c, 3 * c->bank_width), ==, 0x67);
+    g_assert_cmphex(flash_read(c, 4 * c->bank_width), ==, bank_mask(c));
+
+    /* Test ignored high order bits of address. */
+    flash_cmd(c, FLASH_ADDR(0x5555), UNLOCK0_CMD);
+    flash_cmd(c, FLASH_ADDR(0x2AAA), UNLOCK1_CMD);
+    flash_cmd(c, FLASH_ADDR(0x5555), AUTOSELECT_CMD);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
+    reset(c);
+
+    /*
+     * Program a word on each sector, erase one or two sectors per region, and
+     * verify that all of those, and only those, are erased.
+     */
+    byte_addr = 0;
+    for (int region = 0; region < nb_erase_regions; ++region) {
+        for (int i = 0; i < config->nb_blocs[region]; ++i) {
+            program(c, byte_addr, 0);
+            byte_addr += config->sector_len[region];
+        }
+    }
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, SECOND_UNLOCK_CMD);
+    unlock(c);
+    byte_addr = 0;
+    const uint64_t erase_cmd = replicate(c, SECTOR_ERASE_CMD);
+    for (int region = 0; region < nb_erase_regions; ++region) {
+        flash_write(c, byte_addr, erase_cmd);
+        if (c->nb_blocs[region] > 1) {
+            flash_write(c, byte_addr + c->sector_len[region], erase_cmd);
+        }
+        byte_addr += c->sector_len[region] * c->nb_blocs[region];
+    }
+
+    qtest_clock_step_next(c->qtest); /* Step over the 50 us timeout. */
+    wait_for_completion(c, 0);
+    byte_addr = 0;
+    for (int region = 0; region < nb_erase_regions; ++region) {
+        for (int i = 0; i < config->nb_blocs[region]; ++i) {
+            if (i < 2) {
+                g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c));
+            } else {
+                g_assert_cmphex(flash_read(c, byte_addr), ==, 0);
+            }
+            byte_addr += config->sector_len[region];
+        }
+    }
+
+    /* Test erase suspend/resume during erase timeout. */
+    sector_erase(c, 0);
+    /*
+     * Check that DQ 3 is 0 and DQ6 and DQ2 are toggling in the sector being
+     * erased as well as in a sector not being erased.
+     */
+    byte_addr = c->sector_len[0];
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq3, ==, 0);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    status0 = flash_read(c, byte_addr);
+    status1 = flash_read(c, byte_addr);
+    g_assert_cmpint(status0 & dq3, ==, 0);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+
+    /*
+     * Check that after suspending, DQ6 does not toggle but DQ2 does toggle in
+     * an erase suspended sector but that neither toggle (we should be
+     * getting data) in a sector not being erased.
+     */
+    erase_suspend(c);
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq6, ==, status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    g_assert_cmpint(flash_read(c, byte_addr), ==, flash_read(c, byte_addr));
+
+    /* Check that after resuming, DQ3 is 1 and DQ6 and DQ2 toggle. */
+    erase_resume(c);
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    status0 = flash_read(c, byte_addr);
+    status1 = flash_read(c, byte_addr);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    wait_for_completion(c, 0);
+
+    /* Repeat this process but this time suspend after the timeout. */
+    sector_erase(c, 0);
+    qtest_clock_step_next(c->qtest);
+    /*
+     * Check that DQ 3 is 1 and DQ6 and DQ2 are toggling in the sector being
+     * erased as well as in a sector not being erased.
+     */
+    byte_addr = c->sector_len[0];
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    status0 = flash_read(c, byte_addr);
+    status1 = flash_read(c, byte_addr);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+
+    /*
+     * Check that after suspending, DQ6 does not toggle but DQ2 does toggle in
+     * an erase suspended sector but that neither toggle (we should be
+     * getting data) in a sector not being erased.
+     */
+    erase_suspend(c);
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq6, ==, status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    g_assert_cmpint(flash_read(c, byte_addr), ==, flash_read(c, byte_addr));
+
+    /* Check that after resuming, DQ3 is 1 and DQ6 and DQ2 toggle. */
+    erase_resume(c);
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    status0 = flash_read(c, byte_addr);
+    status1 = flash_read(c, byte_addr);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    wait_for_completion(c, 0);
+
+    qtest_quit(qtest);
+}
+
+/*
+ * Test that
+ * 1. enter autoselect mode;
+ * 2. enter CFI mode; and then
+ * 3. exit CFI mode
+ * leaves the flash device in autoselect mode.
+ */
+static void test_cfi_in_autoselect(const void *opaque)
+{
+    const FlashConfig *config = opaque;
+    QTestState *qtest;
+    qtest = qtest_initf("-M musicpal,accel=qtest"
+                        " -drive if=pflash,file=%s,format=raw,copy-on-read",
+                        image_path);
+    FlashConfig explicit_config = expand_config_defaults(config);
+    explicit_config.qtest = qtest;
+    const FlashConfig *c = &explicit_config;
+
+    /* 1. Enter autoselect. */
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, AUTOSELECT_CMD);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
+
+    /* 2. Enter CFI. */
+    flash_cmd(c, CFI_ADDR, CFI_CMD);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x10)), ==, replicate(c, 'Q'));
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x11)), ==, replicate(c, 'R'));
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x12)), ==, replicate(c, 'Y'));
+
+    /* 3. Exit CFI. */
+    reset(c);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
+
+    qtest_quit(qtest);
+}
+
+static void cleanup(void *opaque)
+{
+    unlink(image_path);
+}
+
+/*
+ * XXX: Tests are limited to bank_width = 2 for now because that's what
+ * hw/arm/musicpal.c has.
+ */
+static const FlashConfig configuration[] = {
+    /* One x16 device. */
+    {
+        .bank_width = 2,
+    },
+    /* Nonuniform sectors (top boot). */
+    {
+        .bank_width = 2,
+        .nb_blocs = { 127, 1, 2, 1 },
+        .sector_len = { 0x10000, 0x08000, 0x02000, 0x04000 },
+    },
+    /* Nonuniform sectors (bottom boot). */
+    {
+        .bank_width = 2,
+        .nb_blocs = { 1, 2, 1, 127 },
+        .sector_len = { 0x04000, 0x02000, 0x08000, 0x10000 },
+    },
+};
+
+int main(int argc, char **argv)
+{
+    int fd = mkstemp(image_path);
+    if (fd == -1) {
+        g_printerr("Failed to create temporary file %s: %s\n", image_path,
+                   strerror(errno));
+        exit(EXIT_FAILURE);
+    }
+    if (ftruncate(fd, UNIFORM_FLASH_SIZE) < 0) {
+        int error_code = errno;
+        close(fd);
+        unlink(image_path);
+        g_printerr("Failed to truncate file %s to %u MB: %s\n", image_path,
+                   UNIFORM_FLASH_SIZE, strerror(error_code));
+        exit(EXIT_FAILURE);
+    }
+    close(fd);
+
+    qtest_add_abrt_handler(cleanup, NULL);
+    g_test_init(&argc, &argv, NULL);
+
+    size_t nb_configurations = sizeof configuration / sizeof configuration[0];
+    for (size_t i = 0; i < nb_configurations; ++i) {
+        const FlashConfig *config = &configuration[i];
+        char *path = g_strdup_printf("pflash-cfi02"
+                                     "/geometry/%dx%x-%dx%x-%dx%x-%dx%x"
+                                     "/%d",
+                                     config->nb_blocs[0],
+                                     config->sector_len[0],
+                                     config->nb_blocs[1],
+                                     config->sector_len[1],
+                                     config->nb_blocs[2],
+                                     config->sector_len[2],
+                                     config->nb_blocs[3],
+                                     config->sector_len[3],
+                                     config->bank_width);
+        qtest_add_data_func(path, config, test_geometry);
+        g_free(path);
+    }
+
+    qtest_add_data_func("pflash-cfi02/cfi-in-autoselect", &configuration[0],
+                        test_cfi_in_autoselect);
+    int result = g_test_run();
+    cleanup(NULL);
+    return result;
+}