diff options
author | Anthony Liguori <aliguori@amazon.com> | 2014-01-09 11:24:12 -0800 |
---|---|---|
committer | Anthony Liguori <aliguori@amazon.com> | 2014-01-09 11:24:12 -0800 |
commit | 666eb032d34961a06713049c56361179903527e4 (patch) | |
tree | 0352270bd0d4cd62a44b2ca6d269ab9c7f491aff | |
parent | b61740dbef8d1c8fda8a0f46ecb617e6e865e9e2 (diff) | |
parent | 5862ad0f55fa54f3ed05774b538a7e862a10941f (diff) | |
download | qemu-666eb032d34961a06713049c56361179903527e4.zip qemu-666eb032d34961a06713049c56361179903527e4.tar.gz qemu-666eb032d34961a06713049c56361179903527e4.tar.bz2 |
Merge remote-tracking branch 'mjt/trivial-patches' into staging
* mjt/trivial-patches:
acpi unit-test: Remove temporary disk after test
mainstone: Fix duplicate array values for key 'space'
pxa27x: Add 'const' attribute to keyboard maps
pxa27x: Reduce size of keyboard matrix mapping
doc: Mention chardev:id in available devices for -serial
configure: Python tests must be done before help message
configure: Rewrite code for help message
fix -boot strict regressed in commit 6ef4716
vl: make boot_strict variable static (not used outside vl.c)
x86: only allow real mode to access 32bit without LMA
linux-user: Use macro TARGET_NSIG_WORDS where possible
exynos4210: Use macro ARRAY_SIZE where possible
ui/cocoa: Use macro ARRAY_SIZE where possible
misc: Use macro ARRAY_SIZE where possible
openrisc: Fix spelling in comment (transaltion -> translation)
hw/arm/highbank: Simplify code (memory region in device state)
Message-id: 1388182050-10270-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
-rwxr-xr-x | configure | 362 | ||||
-rw-r--r-- | hw/arm/highbank.c | 7 | ||||
-rw-r--r-- | hw/arm/mainstone.c | 15 | ||||
-rw-r--r-- | hw/arm/z2.c | 2 | ||||
-rw-r--r-- | hw/audio/intel-hda.c | 4 | ||||
-rw-r--r-- | hw/char/exynos4210_uart.c | 6 | ||||
-rw-r--r-- | hw/input/pxa2xx_keypad.c | 6 | ||||
-rw-r--r-- | hw/misc/exynos4210_pmu.c | 3 | ||||
-rw-r--r-- | include/hw/arm/pxa.h | 8 | ||||
-rw-r--r-- | linux-user/signal.c | 8 | ||||
-rw-r--r-- | net/net.c | 2 | ||||
-rw-r--r-- | qemu-char.c | 3 | ||||
-rw-r--r-- | qemu-options.hx | 2 | ||||
-rw-r--r-- | target-i386/helper.c | 6 | ||||
-rw-r--r-- | target-openrisc/translate.c | 2 | ||||
-rw-r--r-- | tests/acpi-test.c | 5 | ||||
-rw-r--r-- | ui/cocoa.m | 5 | ||||
-rw-r--r-- | vl.c | 5 |
18 files changed, 233 insertions, 218 deletions
@@ -1004,6 +1004,25 @@ for opt do esac done +if ! has $python; then + error_exit "Python not found. Use --python=/path/to/python" +fi + +# Note that if the Python conditional here evaluates True we will exit +# with status 1 which is a shell 'false' value. +if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then + error_exit "Cannot use '$python', Python 2.4 or later is required." \ + "Note that Python 3 or later is not yet supported." \ + "Use --python=/path/to/python to specify a supported Python." +fi + +# The -B switch was added in Python 2.6. +# If it is supplied, compiled files are not written. +# Use it for Python versions which support it. +if $python -B -c 'import sys; sys.exit(0)' 2>/dev/null; then + python="$python -B" +fi + case "$cpu" in ppc) CPU_CFLAGS="-m32" @@ -1074,169 +1093,169 @@ cat << EOF Usage: configure [options] Options: [defaults in brackets after descriptions] +Standard options: + --help print this message + --prefix=PREFIX install in PREFIX [$prefix] + --interp-prefix=PREFIX where to find shared libraries, etc. + use %M for cpu name [$interp_prefix] + --target-list=LIST set target list (default: build everything) +$(echo Available targets: $default_target_list | \ + fold -s -w 53 | sed -e 's/^/ /') + +Advanced options (experts only): + --source-path=PATH path of source code [$source_path] + --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cc=CC use C compiler CC [$cc] + --iasl=IASL use ACPI compiler IASL [$iasl] + --host-cc=CC use C compiler CC [$host_cc] for code run at + build time + --cxx=CXX use C++ compiler CXX [$cxx] + --objcc=OBJCC use Objective-C compiler OBJCC [$objcc] + --extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS + --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS + --make=MAKE use specified make [$make] + --install=INSTALL use specified install [$install] + --python=PYTHON use specified python [$python] + --smbd=SMBD use specified smbd [$smbd] + --static enable static build [$static] + --mandir=PATH install man pages in PATH + --datadir=PATH install firmware in PATH$confsuffix + --docdir=PATH install documentation in PATH$confsuffix + --bindir=PATH install binaries in PATH + --libdir=PATH install libraries in PATH + --sysconfdir=PATH install config in PATH$confsuffix + --localstatedir=PATH install local state in PATH (set at runtime on win32) + --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix] + --enable-debug-tcg enable TCG debugging + --disable-debug-tcg disable TCG debugging (default) + --enable-debug-info enable debugging information (default) + --disable-debug-info disable debugging information + --enable-debug enable common debug build options + --enable-sparse enable sparse checker + --disable-sparse disable sparse checker (default) + --disable-strip disable stripping binaries + --disable-werror disable compilation abort on warning + --disable-sdl disable SDL + --enable-sdl enable SDL + --disable-gtk disable gtk UI + --enable-gtk enable gtk UI + --disable-virtfs disable VirtFS + --enable-virtfs enable VirtFS + --disable-vnc disable VNC + --enable-vnc enable VNC + --disable-cocoa disable Cocoa (Mac OS X only) + --enable-cocoa enable Cocoa (default on Mac OS X) + --audio-drv-list=LIST set audio drivers list: + Available drivers: $audio_possible_drivers + --block-drv-whitelist=L Same as --block-drv-rw-whitelist=L + --block-drv-rw-whitelist=L + set block driver read-write whitelist + (affects only QEMU, not qemu-img) + --block-drv-ro-whitelist=L + set block driver read-only whitelist + (affects only QEMU, not qemu-img) + --disable-xen disable xen backend driver support + --enable-xen enable xen backend driver support + --disable-xen-pci-passthrough + --enable-xen-pci-passthrough + --disable-brlapi disable BrlAPI + --enable-brlapi enable BrlAPI + --disable-vnc-tls disable TLS encryption for VNC server + --enable-vnc-tls enable TLS encryption for VNC server + --disable-vnc-sasl disable SASL encryption for VNC server + --enable-vnc-sasl enable SASL encryption for VNC server + --disable-vnc-jpeg disable JPEG lossy compression for VNC server + --enable-vnc-jpeg enable JPEG lossy compression for VNC server + --disable-vnc-png disable PNG compression for VNC server (default) + --enable-vnc-png enable PNG compression for VNC server + --disable-vnc-ws disable Websockets support for VNC server + --enable-vnc-ws enable Websockets support for VNC server + --disable-curses disable curses output + --enable-curses enable curses output + --disable-curl disable curl connectivity + --enable-curl enable curl connectivity + --disable-fdt disable fdt device tree + --enable-fdt enable fdt device tree + --disable-bluez disable bluez stack connectivity + --enable-bluez enable bluez stack connectivity + --disable-slirp disable SLIRP userspace network connectivity + --disable-kvm disable KVM acceleration support + --enable-kvm enable KVM acceleration support + --disable-rdma disable RDMA-based migration support + --enable-rdma enable RDMA-based migration support + --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI) + --enable-system enable all system emulation targets + --disable-system disable all system emulation targets + --enable-user enable supported user emulation targets + --disable-user disable all user emulation targets + --enable-linux-user enable all linux usermode emulation targets + --disable-linux-user disable all linux usermode emulation targets + --enable-bsd-user enable all BSD usermode emulation targets + --disable-bsd-user disable all BSD usermode emulation targets + --enable-guest-base enable GUEST_BASE support for usermode + emulation targets + --disable-guest-base disable GUEST_BASE support + --enable-pie build Position Independent Executables + --disable-pie do not build Position Independent Executables + --fmod-lib path to FMOD library + --fmod-inc path to FMOD includes + --oss-lib path to OSS library + --enable-uname-release=R Return R for uname -r in usermode emulation + --cpu=CPU Build for host CPU [$cpu] + --disable-uuid disable uuid support + --enable-uuid enable uuid support + --disable-vde disable support for vde network + --enable-vde enable support for vde network + --disable-netmap disable support for netmap network + --enable-netmap enable support for netmap network + --disable-linux-aio disable Linux AIO support + --enable-linux-aio enable Linux AIO support + --disable-cap-ng disable libcap-ng support + --enable-cap-ng enable libcap-ng support + --disable-attr disables attr and xattr support + --enable-attr enable attr and xattr support + --disable-blobs disable installing provided firmware blobs + --enable-docs enable documentation build + --disable-docs disable documentation build + --disable-vhost-net disable vhost-net acceleration support + --enable-vhost-net enable vhost-net acceleration support + --enable-trace-backend=B Set trace backend + Available backends: $($python $source_path/scripts/tracetool.py --list-backends) + --with-trace-file=NAME Full PATH,NAME of file to store traces + Default:trace-<pid> + --disable-spice disable spice + --enable-spice enable spice + --enable-rbd enable building the rados block device (rbd) + --disable-libiscsi disable iscsi support + --enable-libiscsi enable iscsi support + --disable-smartcard-nss disable smartcard nss support + --enable-smartcard-nss enable smartcard nss support + --disable-libusb disable libusb (for usb passthrough) + --enable-libusb enable libusb (for usb passthrough) + --disable-usb-redir disable usb network redirection support + --enable-usb-redir enable usb network redirection support + --disable-guest-agent disable building of the QEMU Guest Agent + --enable-guest-agent enable building of the QEMU Guest Agent + --with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent + --with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb) + --disable-seccomp disable seccomp support + --enable-seccomp enables seccomp support + --with-coroutine=BACKEND coroutine backend. Supported options: + gthread, ucontext, sigaltstack, windows + --disable-coroutine-pool disable coroutine freelist (worse performance) + --enable-coroutine-pool enable coroutine freelist (better performance) + --enable-glusterfs enable GlusterFS backend + --disable-glusterfs disable GlusterFS backend + --enable-gcov enable test coverage analysis with gcov + --gcov=GCOV use specified gcov [$gcov_tool] + --enable-tpm enable TPM support + --disable-libssh2 disable ssh block device support + --enable-libssh2 enable ssh block device support + --disable-vhdx disables support for the Microsoft VHDX image format + --enable-vhdx enable support for the Microsoft VHDX image format + +NOTE: The object files are built at the place where configure is launched EOF -echo "Standard options:" -echo " --help print this message" -echo " --prefix=PREFIX install in PREFIX [$prefix]" -echo " --interp-prefix=PREFIX where to find shared libraries, etc." -echo " use %M for cpu name [$interp_prefix]" -echo " --target-list=LIST set target list (default: build everything)" -echo "Available targets: $default_target_list" | \ - fold -s -w 53 | sed -e 's/^/ /' -echo "" -echo "Advanced options (experts only):" -echo " --source-path=PATH path of source code [$source_path]" -echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]" -echo " --cc=CC use C compiler CC [$cc]" -echo " --iasl=IASL use ACPI compiler IASL [$iasl]" -echo " --host-cc=CC use C compiler CC [$host_cc] for code run at" -echo " build time" -echo " --cxx=CXX use C++ compiler CXX [$cxx]" -echo " --objcc=OBJCC use Objective-C compiler OBJCC [$objcc]" -echo " --extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS" -echo " --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS" -echo " --make=MAKE use specified make [$make]" -echo " --install=INSTALL use specified install [$install]" -echo " --python=PYTHON use specified python [$python]" -echo " --smbd=SMBD use specified smbd [$smbd]" -echo " --static enable static build [$static]" -echo " --mandir=PATH install man pages in PATH" -echo " --datadir=PATH install firmware in PATH$confsuffix" -echo " --docdir=PATH install documentation in PATH$confsuffix" -echo " --bindir=PATH install binaries in PATH" -echo " --libdir=PATH install libraries in PATH" -echo " --sysconfdir=PATH install config in PATH$confsuffix" -echo " --localstatedir=PATH install local state in PATH (set at runtime on win32)" -echo " --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix]" -echo " --enable-debug-tcg enable TCG debugging" -echo " --disable-debug-tcg disable TCG debugging (default)" -echo " --enable-debug-info enable debugging information (default)" -echo " --disable-debug-info disable debugging information" -echo " --enable-debug enable common debug build options" -echo " --enable-sparse enable sparse checker" -echo " --disable-sparse disable sparse checker (default)" -echo " --disable-strip disable stripping binaries" -echo " --disable-werror disable compilation abort on warning" -echo " --disable-sdl disable SDL" -echo " --enable-sdl enable SDL" -echo " --disable-gtk disable gtk UI" -echo " --enable-gtk enable gtk UI" -echo " --disable-virtfs disable VirtFS" -echo " --enable-virtfs enable VirtFS" -echo " --disable-vnc disable VNC" -echo " --enable-vnc enable VNC" -echo " --disable-cocoa disable Cocoa (Mac OS X only)" -echo " --enable-cocoa enable Cocoa (default on Mac OS X)" -echo " --audio-drv-list=LIST set audio drivers list:" -echo " Available drivers: $audio_possible_drivers" -echo " --block-drv-whitelist=L Same as --block-drv-rw-whitelist=L" -echo " --block-drv-rw-whitelist=L" -echo " set block driver read-write whitelist" -echo " (affects only QEMU, not qemu-img)" -echo " --block-drv-ro-whitelist=L" -echo " set block driver read-only whitelist" -echo " (affects only QEMU, not qemu-img)" -echo " --disable-xen disable xen backend driver support" -echo " --enable-xen enable xen backend driver support" -echo " --disable-xen-pci-passthrough" -echo " --enable-xen-pci-passthrough" -echo " --disable-brlapi disable BrlAPI" -echo " --enable-brlapi enable BrlAPI" -echo " --disable-vnc-tls disable TLS encryption for VNC server" -echo " --enable-vnc-tls enable TLS encryption for VNC server" -echo " --disable-vnc-sasl disable SASL encryption for VNC server" -echo " --enable-vnc-sasl enable SASL encryption for VNC server" -echo " --disable-vnc-jpeg disable JPEG lossy compression for VNC server" -echo " --enable-vnc-jpeg enable JPEG lossy compression for VNC server" -echo " --disable-vnc-png disable PNG compression for VNC server (default)" -echo " --enable-vnc-png enable PNG compression for VNC server" -echo " --disable-vnc-ws disable Websockets support for VNC server" -echo " --enable-vnc-ws enable Websockets support for VNC server" -echo " --disable-curses disable curses output" -echo " --enable-curses enable curses output" -echo " --disable-curl disable curl connectivity" -echo " --enable-curl enable curl connectivity" -echo " --disable-fdt disable fdt device tree" -echo " --enable-fdt enable fdt device tree" -echo " --disable-bluez disable bluez stack connectivity" -echo " --enable-bluez enable bluez stack connectivity" -echo " --disable-slirp disable SLIRP userspace network connectivity" -echo " --disable-kvm disable KVM acceleration support" -echo " --enable-kvm enable KVM acceleration support" -echo " --disable-rdma disable RDMA-based migration support" -echo " --enable-rdma enable RDMA-based migration support" -echo " --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)" -echo " --enable-system enable all system emulation targets" -echo " --disable-system disable all system emulation targets" -echo " --enable-user enable supported user emulation targets" -echo " --disable-user disable all user emulation targets" -echo " --enable-linux-user enable all linux usermode emulation targets" -echo " --disable-linux-user disable all linux usermode emulation targets" -echo " --enable-bsd-user enable all BSD usermode emulation targets" -echo " --disable-bsd-user disable all BSD usermode emulation targets" -echo " --enable-guest-base enable GUEST_BASE support for usermode" -echo " emulation targets" -echo " --disable-guest-base disable GUEST_BASE support" -echo " --enable-pie build Position Independent Executables" -echo " --disable-pie do not build Position Independent Executables" -echo " --fmod-lib path to FMOD library" -echo " --fmod-inc path to FMOD includes" -echo " --oss-lib path to OSS library" -echo " --enable-uname-release=R Return R for uname -r in usermode emulation" -echo " --cpu=CPU Build for host CPU [$cpu]" -echo " --disable-uuid disable uuid support" -echo " --enable-uuid enable uuid support" -echo " --disable-vde disable support for vde network" -echo " --enable-vde enable support for vde network" -echo " --disable-netmap disable support for netmap network" -echo " --enable-netmap enable support for netmap network" -echo " --disable-linux-aio disable Linux AIO support" -echo " --enable-linux-aio enable Linux AIO support" -echo " --disable-cap-ng disable libcap-ng support" -echo " --enable-cap-ng enable libcap-ng support" -echo " --disable-attr disables attr and xattr support" -echo " --enable-attr enable attr and xattr support" -echo " --disable-blobs disable installing provided firmware blobs" -echo " --enable-docs enable documentation build" -echo " --disable-docs disable documentation build" -echo " --disable-vhost-net disable vhost-net acceleration support" -echo " --enable-vhost-net enable vhost-net acceleration support" -echo " --enable-trace-backend=B Set trace backend" -echo " Available backends:" $($python "$source_path"/scripts/tracetool.py --list-backends) -echo " --with-trace-file=NAME Full PATH,NAME of file to store traces" -echo " Default:trace-<pid>" -echo " --disable-spice disable spice" -echo " --enable-spice enable spice" -echo " --enable-rbd enable building the rados block device (rbd)" -echo " --disable-libiscsi disable iscsi support" -echo " --enable-libiscsi enable iscsi support" -echo " --disable-smartcard-nss disable smartcard nss support" -echo " --enable-smartcard-nss enable smartcard nss support" -echo " --disable-libusb disable libusb (for usb passthrough)" -echo " --enable-libusb enable libusb (for usb passthrough)" -echo " --disable-usb-redir disable usb network redirection support" -echo " --enable-usb-redir enable usb network redirection support" -echo " --disable-guest-agent disable building of the QEMU Guest Agent" -echo " --enable-guest-agent enable building of the QEMU Guest Agent" -echo " --with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent" -echo " --with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb)" -echo " --disable-seccomp disable seccomp support" -echo " --enable-seccomp enables seccomp support" -echo " --with-coroutine=BACKEND coroutine backend. Supported options:" -echo " gthread, ucontext, sigaltstack, windows" -echo " --disable-coroutine-pool disable coroutine freelist (worse performance)" -echo " --enable-coroutine-pool enable coroutine freelist (better performance)" -echo " --enable-glusterfs enable GlusterFS backend" -echo " --disable-glusterfs disable GlusterFS backend" -echo " --enable-gcov enable test coverage analysis with gcov" -echo " --gcov=GCOV use specified gcov [$gcov_tool]" -echo " --enable-tpm enable TPM support" -echo " --disable-libssh2 disable ssh block device support" -echo " --enable-libssh2 enable ssh block device support" -echo " --disable-vhdx disables support for the Microsoft VHDX image format" -echo " --enable-vhdx enable support for the Microsoft VHDX image format" -echo "" -echo "NOTE: The object files are built at the place where configure is launched" exit 1 fi @@ -1419,25 +1438,6 @@ if test "$solaris" = "yes" ; then fi fi -if ! has $python; then - error_exit "Python not found. Use --python=/path/to/python" -fi - -# Note that if the Python conditional here evaluates True we will exit -# with status 1 which is a shell 'false' value. -if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then - error_exit "Cannot use '$python', Python 2.4 or later is required." \ - "Note that Python 3 or later is not yet supported." \ - "Use --python=/path/to/python to specify a supported Python." -fi - -# The -B switch was added in Python 2.6. -# If it is supplied, compiled files are not written. -# Use it for Python versions which support it. -if $python -B -c 'import sys; sys.exit(0)' 2>/dev/null; then - python="$python -B" -fi - if test -z "${target_list+xxx}" ; then target_list="$default_target_list" else diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index c75b425..d76a1d1 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -126,7 +126,7 @@ typedef struct { SysBusDevice parent_obj; /*< public >*/ - MemoryRegion *iomem; + MemoryRegion iomem; uint32_t regs[NUM_REGS]; } HighbankRegsState; @@ -155,10 +155,9 @@ static int highbank_regs_init(SysBusDevice *dev) { HighbankRegsState *s = HIGHBANK_REGISTERS(dev); - s->iomem = g_new(MemoryRegion, 1); - memory_region_init_io(s->iomem, OBJECT(s), &hb_mem_ops, s->regs, + memory_region_init_io(&s->iomem, OBJECT(s), &hb_mem_ops, s->regs, "highbank_regs", 0x1000); - sysbus_init_mmio(dev, s->iomem); + sysbus_init_mmio(dev, &s->iomem); return 0; } diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index 9402c84..d8e075e 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -45,7 +45,7 @@ #define S1_STSCHG_IRQ 14 #define S1_IRQ 15 -static struct keymap map[0xE0] = { +static const struct keymap map[0xE0] = { [0 ... 0xDF] = { -1, -1 }, [0x1e] = {0,0}, /* a */ [0x30] = {0,1}, /* b */ @@ -75,9 +75,18 @@ static struct keymap map[0xE0] = { [0x2c] = {4,3}, /* z */ [0xc7] = {5,0}, /* Home */ [0x2a] = {5,1}, /* shift */ - [0x39] = {5,2}, /* space */ + /* + * There are two matrix positions which map to space, + * but QEMU can only use one of them for the reverse + * mapping, so simply use the second one. + */ + /* [0x39] = {5,2}, space */ [0x39] = {5,3}, /* space */ - [0x1c] = {5,5}, /* enter */ + /* + * Matrix position {5,4} and other keys are missing here. + * TODO: Compare with Linux code and test real hardware. + */ + [0x1c] = {5,5}, /* enter (TODO: might be wrong) */ [0xc8] = {6,0}, /* up */ [0xd0] = {6,1}, /* down */ [0xcb] = {6,2}, /* left */ diff --git a/hw/arm/z2.c b/hw/arm/z2.c index d52c501..97367b1 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -33,7 +33,7 @@ #define DPRINTF(fmt, ...) #endif -static struct keymap map[0x100] = { +static const struct keymap map[0x100] = { [0 ... 0xff] = { -1, -1 }, [0x3b] = {0, 0}, /* Option = F1 */ [0xc8] = {0, 1}, /* Up */ diff --git a/hw/audio/intel-hda.c b/hw/audio/intel-hda.c index 6ab8c24..d41f82c 100644 --- a/hw/audio/intel-hda.c +++ b/hw/audio/intel-hda.c @@ -900,7 +900,7 @@ static const IntelHDAReg *intel_hda_reg_find(IntelHDAState *d, hwaddr addr) { const IntelHDAReg *reg; - if (addr >= sizeof(regtab)/sizeof(regtab[0])) { + if (addr >= ARRAY_SIZE(regtab)) { goto noreg; } reg = regtab+addr; @@ -1025,7 +1025,7 @@ static void intel_hda_regs_reset(IntelHDAState *d) uint32_t *addr; int i; - for (i = 0; i < sizeof(regtab)/sizeof(regtab[0]); i++) { + for (i = 0; i < ARRAY_SIZE(regtab); i++) { if (regtab[i].name == NULL) { continue; } diff --git a/hw/char/exynos4210_uart.c b/hw/char/exynos4210_uart.c index eef23a0..19b59cc 100644 --- a/hw/char/exynos4210_uart.c +++ b/hw/char/exynos4210_uart.c @@ -192,10 +192,9 @@ typedef struct Exynos4210UartState { static const char *exynos4210_uart_regname(hwaddr offset) { - int regs_number = sizeof(exynos4210_uart_regs) / sizeof(Exynos4210UartReg); int i; - for (i = 0; i < regs_number; i++) { + for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { if (offset == exynos4210_uart_regs[i].offset) { return exynos4210_uart_regs[i].name; } @@ -544,10 +543,9 @@ static void exynos4210_uart_event(void *opaque, int event) static void exynos4210_uart_reset(DeviceState *dev) { Exynos4210UartState *s = EXYNOS4210_UART(dev); - int regs_number = sizeof(exynos4210_uart_regs)/sizeof(Exynos4210UartReg); int i; - for (i = 0; i < regs_number; i++) { + for (i = 0; i < ARRAY_SIZE(exynos4210_uart_regs); i++) { s->reg[I_(exynos4210_uart_regs[i].offset)] = exynos4210_uart_regs[i].reset_value; } diff --git a/hw/input/pxa2xx_keypad.c b/hw/input/pxa2xx_keypad.c index 846d137..b90b0ba 100644 --- a/hw/input/pxa2xx_keypad.c +++ b/hw/input/pxa2xx_keypad.c @@ -85,7 +85,7 @@ struct PXA2xxKeyPadState { MemoryRegion iomem; qemu_irq irq; - struct keymap *map; + const struct keymap *map; int pressed_cnt; int alt_code; @@ -322,8 +322,8 @@ PXA2xxKeyPadState *pxa27x_keypad_init(MemoryRegion *sysmem, return s; } -void pxa27x_register_keypad(PXA2xxKeyPadState *kp, struct keymap *map, - int size) +void pxa27x_register_keypad(PXA2xxKeyPadState *kp, + const struct keymap *map, int size) { if(!map || size < 0x80) { fprintf(stderr, "%s - No PXA keypad map defined\n", __FUNCTION__); diff --git a/hw/misc/exynos4210_pmu.c b/hw/misc/exynos4210_pmu.c index cbf0795..5ec14d1 100644 --- a/hw/misc/exynos4210_pmu.c +++ b/hw/misc/exynos4210_pmu.c @@ -383,8 +383,7 @@ static const Exynos4210PmuReg exynos4210_pmu_regs[] = { {"GPS_ALIVE_OPTION", GPS_ALIVE_OPTION, 0x00000001}, }; -#define PMU_NUM_OF_REGISTERS \ - (sizeof(exynos4210_pmu_regs) / sizeof(Exynos4210PmuReg)) +#define PMU_NUM_OF_REGISTERS ARRAY_SIZE(exynos4210_pmu_regs) #define TYPE_EXYNOS4210_PMU "exynos4210.pmu" #define EXYNOS4210_PMU(obj) \ diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index a4e1a66..7ca330a 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -102,15 +102,15 @@ void pxa2xx_pcmcia_set_irq_cb(void *opaque, qemu_irq irq, qemu_irq cd_irq); /* pxa2xx_keypad.c */ struct keymap { - int column; - int row; + int8_t column; + int8_t row; }; typedef struct PXA2xxKeyPadState PXA2xxKeyPadState; PXA2xxKeyPadState *pxa27x_keypad_init(MemoryRegion *sysmem, hwaddr base, qemu_irq irq); -void pxa27x_register_keypad(PXA2xxKeyPadState *kp, struct keymap *map, - int size); +void pxa27x_register_keypad(PXA2xxKeyPadState *kp, + const struct keymap *map, int size); /* pxa2xx.c */ typedef struct PXA2xxI2CState PXA2xxI2CState; diff --git a/linux-user/signal.c b/linux-user/signal.c index 6c74b18..01d7c39 100644 --- a/linux-user/signal.c +++ b/linux-user/signal.c @@ -2543,9 +2543,9 @@ void sparc64_set_context(CPUSPARCState *env) abi_ulong *src, *dst; src = ucp->tuc_sigmask.sig; dst = target_set.sig; - for (i = 0; i < sizeof(target_sigset_t) / sizeof(abi_ulong); - i++, dst++, src++) + for (i = 0; i < TARGET_NSIG_WORDS; i++, dst++, src++) { err |= __get_user(*dst, src); + } if (err) goto do_sigsegv; } @@ -2648,9 +2648,9 @@ void sparc64_get_context(CPUSPARCState *env) abi_ulong *src, *dst; src = target_set.sig; dst = ucp->tuc_sigmask.sig; - for (i = 0; i < sizeof(target_sigset_t) / sizeof(abi_ulong); - i++, dst++, src++) + for (i = 0; i < TARGET_NSIG_WORDS; i++, dst++, src++) { err |= __put_user(*src, dst); + } if (err) goto do_sigsegv; } @@ -856,7 +856,7 @@ static int net_host_check_device(const char *device) ,"vde" #endif }; - for (i = 0; i < sizeof(valid_param_list) / sizeof(char *); i++) { + for (i = 0; i < ARRAY_SIZE(valid_param_list); i++) { if (!strncmp(valid_param_list[i], device, strlen(valid_param_list[i]))) return 1; diff --git a/qemu-char.c b/qemu-char.c index 418dc69..30c5a6a 100644 --- a/qemu-char.c +++ b/qemu-char.c @@ -1975,8 +1975,7 @@ static void win_stdio_wait_func(void *opaque) DWORD dwSize; int i; - ret = ReadConsoleInput(stdio->hStdIn, buf, sizeof(buf) / sizeof(*buf), - &dwSize); + ret = ReadConsoleInput(stdio->hStdIn, buf, ARRAY_SIZE(buf), &dwSize); if (!ret) { /* Avoid error storm */ diff --git a/qemu-options.hx b/qemu-options.hx index bcfe9ea..56e5fdf 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -2419,6 +2419,8 @@ vc:80Cx24C No device is allocated. @item null void device +@item chardev:@var{id} +Use a named character device defined with the @code{-chardev} option. @item /dev/XXX [Linux only] Use host tty, e.g. @file{/dev/ttyS0}. The host serial port parameters are set according to the emulated ones. diff --git a/target-i386/helper.c b/target-i386/helper.c index 7c196ff..ed965d6 100644 --- a/target-i386/helper.c +++ b/target-i386/helper.c @@ -531,6 +531,12 @@ int cpu_x86_handle_mmu_fault(CPUX86State *env, target_ulong addr, if (!(env->cr[0] & CR0_PG_MASK)) { pte = addr; +#ifdef TARGET_X86_64 + if (!(env->hflags & HF_LMA_MASK)) { + /* Without long mode we can only address 32bits in real mode */ + pte = (uint32_t)pte; + } +#endif virt_addr = addr & TARGET_PAGE_MASK; prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; page_size = 4096; diff --git a/target-openrisc/translate.c b/target-openrisc/translate.c index 91c60eb..b381477 100644 --- a/target-openrisc/translate.c +++ b/target-openrisc/translate.c @@ -112,7 +112,7 @@ void openrisc_translate_init(void) } } -/* Writeback SR_F transaltion-space to execution-space. */ +/* Writeback SR_F translation space to execution space. */ static inline void wb_SR_F(void) { int label; diff --git a/tests/acpi-test.c b/tests/acpi-test.c index ca83b1d..df1af83 100644 --- a/tests/acpi-test.c +++ b/tests/acpi-test.c @@ -382,6 +382,7 @@ int main(int argc, char *argv[]) { const char *arch = qtest_get_arch(); FILE *f = fopen(disk, "w"); + int ret; fwrite(boot_sector, 1, sizeof boot_sector, f); fclose(f); @@ -390,5 +391,7 @@ int main(int argc, char *argv[]) if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) { qtest_add_func("acpi/tcg", test_acpi_tcg); } - return g_test_run(); + ret = g_test_run(); + unlink(disk); + return ret; } @@ -240,9 +240,8 @@ int keymap[] = static int cocoa_keycode_to_qemu(int keycode) { - if((sizeof(keymap)/sizeof(int)) <= keycode) - { - printf("(cocoa) warning unknow keycode 0x%x\n", keycode); + if (ARRAY_SIZE(keymap) <= keycode) { + printf("(cocoa) warning unknown keycode 0x%x\n", keycode); return 0; } return keymap[keycode]; @@ -230,7 +230,7 @@ int ctrl_grab = 0; unsigned int nb_prom_envs = 0; const char *prom_envs[MAX_PROM_ENVS]; int boot_menu; -bool boot_strict; +static bool boot_strict; uint8_t *boot_splash_filedata; size_t boot_splash_filedata_size; uint8_t qemu_extra_params_fw[2]; @@ -461,7 +461,7 @@ static QemuOptsList qemu_boot_opts = { .type = QEMU_OPT_STRING, }, { .name = "strict", - .type = QEMU_OPT_STRING, + .type = QEMU_OPT_BOOL, }, { /*End of list */ } }, @@ -4081,6 +4081,7 @@ int main(int argc, char **argv, char **envp) } boot_menu = qemu_opt_get_bool(opts, "menu", boot_menu); + boot_strict = qemu_opt_get_bool(opts, "strict", false); } if (!kernel_cmdline) { |