diff options
author | Fabian Aggeler <aggelerf@ethz.ch> | 2014-12-11 12:07:50 +0000 |
---|---|---|
committer | Peter Maydell <peter.maydell@linaro.org> | 2014-12-11 12:07:50 +0000 |
commit | 137feaa9a1622620adf19c0b707883dd990738e2 (patch) | |
tree | c5eacacf5f85cf7cb1772fc18e20f27d057b639f | |
parent | e89e51a17ea0d8aef9bf9b766c98f963e835fbf2 (diff) | |
download | qemu-137feaa9a1622620adf19c0b707883dd990738e2.zip qemu-137feaa9a1622620adf19c0b707883dd990738e2.tar.gz qemu-137feaa9a1622620adf19c0b707883dd990738e2.tar.bz2 |
target-arm: add SCTLR_EL3 and make SCTLR banked
Implements SCTLR_EL3 and uses secure/non-secure instance when
needed.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-14-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-rw-r--r-- | hw/arm/pxa2xx.c | 2 | ||||
-rw-r--r-- | target-arm/cpu.c | 8 | ||||
-rw-r--r-- | target-arm/cpu.h | 10 | ||||
-rw-r--r-- | target-arm/helper.c | 72 | ||||
-rw-r--r-- | target-arm/op_helper.c | 2 |
5 files changed, 59 insertions, 35 deletions
diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index 693dfec..11d51af 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -273,7 +273,7 @@ static void pxa2xx_pwrmode_write(CPUARMState *env, const ARMCPRegInfo *ri, case 3: s->cpu->env.uncached_cpsr = ARM_CPU_MODE_SVC; s->cpu->env.daif = PSTATE_A | PSTATE_F | PSTATE_I; - s->cpu->env.cp15.c1_sys = 0; + s->cpu->env.cp15.sctlr_ns = 0; s->cpu->env.cp15.c1_coproc = 0; s->cpu->env.cp15.ttbr0_el1 = 0; s->cpu->env.cp15.c3 = 0; diff --git a/target-arm/cpu.c b/target-arm/cpu.c index 5ce7350..fdb7b35 100644 --- a/target-arm/cpu.c +++ b/target-arm/cpu.c @@ -109,7 +109,7 @@ static void arm_cpu_reset(CPUState *s) #if defined(CONFIG_USER_ONLY) env->pstate = PSTATE_MODE_EL0t; /* Userspace expects access to DC ZVA, CTL_EL0 and the cache ops */ - env->cp15.c1_sys |= SCTLR_UCT | SCTLR_UCI | SCTLR_DZE; + env->cp15.sctlr_el[1] |= SCTLR_UCT | SCTLR_UCI | SCTLR_DZE; /* and to the FP/Neon instructions */ env->cp15.c1_coproc = deposit64(env->cp15.c1_coproc, 20, 2, 3); #else @@ -167,7 +167,11 @@ static void arm_cpu_reset(CPUState *s) env->thumb = initial_pc & 1; } - if (env->cp15.c1_sys & SCTLR_V) { + /* AArch32 has a hard highvec setting of 0xFFFF0000. If we are currently + * executing as AArch32 then check if highvecs are enabled and + * adjust the PC accordingly. + */ + if (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_V) { env->regs[15] = 0xFFFF0000; } diff --git a/target-arm/cpu.h b/target-arm/cpu.h index cdf2dd7..6559aa8 100644 --- a/target-arm/cpu.h +++ b/target-arm/cpu.h @@ -178,7 +178,15 @@ typedef struct CPUARMState { struct { uint32_t c0_cpuid; uint64_t c0_cssel; /* Cache size selection. */ - uint64_t c1_sys; /* System control register. */ + union { /* System control register. */ + struct { + uint64_t _unused_sctlr; + uint64_t sctlr_ns; + uint64_t hsctlr; + uint64_t sctlr_s; + }; + uint64_t sctlr_el[4]; + }; uint64_t c1_coproc; /* Coprocessor access register. */ uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */ uint64_t sder; /* Secure debug enable register. */ diff --git a/target-arm/helper.c b/target-arm/helper.c index 412c465..769a182 100644 --- a/target-arm/helper.c +++ b/target-arm/helper.c @@ -1908,7 +1908,7 @@ static void aa64_fpsr_write(CPUARMState *env, const ARMCPRegInfo *ri, static CPAccessResult aa64_daif_access(CPUARMState *env, const ARMCPRegInfo *ri) { - if (arm_current_el(env) == 0 && !(env->cp15.c1_sys & SCTLR_UMA)) { + if (arm_current_el(env) == 0 && !(env->cp15.sctlr_el[1] & SCTLR_UMA)) { return CP_ACCESS_TRAP; } return CP_ACCESS_OK; @@ -1926,7 +1926,7 @@ static CPAccessResult aa64_cacheop_access(CPUARMState *env, /* Cache invalidate/clean: NOP, but EL0 must UNDEF unless * SCTLR_EL1.UCI is set. */ - if (arm_current_el(env) == 0 && !(env->cp15.c1_sys & SCTLR_UCI)) { + if (arm_current_el(env) == 0 && !(env->cp15.sctlr_el[1] & SCTLR_UCI)) { return CP_ACCESS_TRAP; } return CP_ACCESS_OK; @@ -2003,7 +2003,7 @@ static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri) /* We don't implement EL2, so the only control on DC ZVA is the * bit in the SCTLR which can prohibit access for EL0. */ - if (arm_current_el(env) == 0 && !(env->cp15.c1_sys & SCTLR_DZE)) { + if (arm_current_el(env) == 0 && !(env->cp15.sctlr_el[1] & SCTLR_DZE)) { return CP_ACCESS_TRAP; } return CP_ACCESS_OK; @@ -2042,6 +2042,24 @@ static void spsel_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) update_spsel(env, val); } +static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = arm_env_get_cpu(env); + + if (raw_read(env, ri) == value) { + /* Skip the TLB flush if nothing actually changed; Linux likes + * to do a lot of pointless SCTLR writes. + */ + return; + } + + raw_write(env, ri, value); + /* ??? Lots of these bits are not implemented. */ + /* This may enable/disable the MMU, so do a TLB flush. */ + tlb_flush(CPU(cpu), 1); +} + static const ARMCPRegInfo v8_cp_reginfo[] = { /* Minimal set of EL0-visible registers. This will need to be expanded * significantly for system emulation of AArch64 CPUs. @@ -2311,6 +2329,10 @@ static const ARMCPRegInfo v8_el2_cp_reginfo[] = { }; static const ARMCPRegInfo v8_el3_cp_reginfo[] = { + { .name = "SCTLR_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 0, + .access = PL3_RW, .raw_writefn = raw_write, .writefn = sctlr_write, + .fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[3]) }, { .name = "ELR_EL3", .state = ARM_CP_STATE_AA64, .type = ARM_CP_NO_MIGRATE, .opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1, @@ -2362,30 +2384,12 @@ static const ARMCPRegInfo el3_cp_reginfo[] = { REGINFO_SENTINEL }; -static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, - uint64_t value) -{ - ARMCPU *cpu = arm_env_get_cpu(env); - - if (raw_read(env, ri) == value) { - /* Skip the TLB flush if nothing actually changed; Linux likes - * to do a lot of pointless SCTLR writes. - */ - return; - } - - raw_write(env, ri, value); - /* ??? Lots of these bits are not implemented. */ - /* This may enable/disable the MMU, so do a TLB flush. */ - tlb_flush(CPU(cpu), 1); -} - static CPAccessResult ctr_el0_access(CPUARMState *env, const ARMCPRegInfo *ri) { /* Only accessible in EL0 if SCTLR.UCT is set (and only in AArch64, * but the AArch32 CTR has its own reginfo struct) */ - if (arm_current_el(env) == 0 && !(env->cp15.c1_sys & SCTLR_UCT)) { + if (arm_current_el(env) == 0 && !(env->cp15.sctlr_el[1] & SCTLR_UCT)) { return CP_ACCESS_TRAP; } return CP_ACCESS_OK; @@ -3182,8 +3186,10 @@ void register_cp_regs_for_features(ARMCPU *cpu) { ARMCPRegInfo sctlr = { .name = "SCTLR", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_sys), + .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0, + .access = PL1_RW, + .bank_fieldoffsets = { offsetof(CPUARMState, cp15.sctlr_s), + offsetof(CPUARMState, cp15.sctlr_ns) }, .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr, .raw_writefn = raw_write, }; @@ -4278,7 +4284,7 @@ void arm_cpu_do_interrupt(CPUState *cs) if (new_mode == ARM_CPU_MODE_MON) { addr += env->cp15.mvbar; - } else if (env->cp15.c1_sys & SCTLR_V) { + } else if (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_V) { /* High vectors. When enabled, base address cannot be remapped. */ addr += 0xffff0000; } else { @@ -4308,7 +4314,7 @@ void arm_cpu_do_interrupt(CPUState *cs) /* this is a lie, as the was no c1_sys on V4T/V5, but who cares * and we should just guard the thumb mode on V4 */ if (arm_feature(env, ARM_FEATURE_V4T)) { - env->thumb = (env->cp15.c1_sys & SCTLR_TE) != 0; + env->thumb = (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_TE) != 0; } env->regs[14] = env->regs[15] + offset; env->regs[15] = addr; @@ -4339,7 +4345,7 @@ static inline int check_ap(CPUARMState *env, int ap, int domain_prot, } if (access_type == 1) return 0; - switch (env->cp15.c1_sys & (SCTLR_S | SCTLR_R)) { + switch (A32_BANKED_CURRENT_REG_GET(env, sctlr) & (SCTLR_S | SCTLR_R)) { case SCTLR_S: return is_user ? 0 : PAGE_READ; case SCTLR_R: @@ -4588,7 +4594,8 @@ static int get_phys_addr_v6(CPUARMState *env, uint32_t address, int access_type, goto do_fault; /* The simplified model uses AP[0] as an access control bit. */ - if ((env->cp15.c1_sys & SCTLR_AFE) && (ap & 1) == 0) { + if ((A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_AFE) + && (ap & 1) == 0) { /* Access flag fault. */ code = (code == 15) ? 6 : 3; goto do_fault; @@ -4921,11 +4928,16 @@ static inline int get_phys_addr(CPUARMState *env, target_ulong address, hwaddr *phys_ptr, int *prot, target_ulong *page_size) { + /* This is not entirely correct as get_phys_addr() can also be called + * from ats_write() for an address translation of a specific regime. + */ + uint32_t sctlr = A32_BANKED_CURRENT_REG_GET(env, sctlr); + /* Fast Context Switch Extension. */ if (address < 0x02000000) address += env->cp15.c13_fcse; - if ((env->cp15.c1_sys & SCTLR_M) == 0) { + if ((sctlr & SCTLR_M) == 0) { /* MMU/MPU disabled. */ *phys_ptr = address; *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; @@ -4938,7 +4950,7 @@ static inline int get_phys_addr(CPUARMState *env, target_ulong address, } else if (extended_addresses_enabled(env)) { return get_phys_addr_lpae(env, address, access_type, is_user, phys_ptr, prot, page_size); - } else if (env->cp15.c1_sys & SCTLR_XP) { + } else if (sctlr & SCTLR_XP) { return get_phys_addr_v6(env, address, access_type, is_user, phys_ptr, prot, page_size); } else { diff --git a/target-arm/op_helper.c b/target-arm/op_helper.c index 62012c3..a8dea5a 100644 --- a/target-arm/op_helper.c +++ b/target-arm/op_helper.c @@ -361,7 +361,7 @@ void HELPER(msr_i_pstate)(CPUARMState *env, uint32_t op, uint32_t imm) * Note that SPSel is never OK from EL0; we rely on handle_msr_i() * to catch that case at translate time. */ - if (arm_current_el(env) == 0 && !(env->cp15.c1_sys & SCTLR_UMA)) { + if (arm_current_el(env) == 0 && !(env->cp15.sctlr_el[1] & SCTLR_UMA)) { raise_exception(env, EXCP_UDEF); } |