diff options
Diffstat (limited to 'libgloss/ChangeLog')
| -rw-r--r-- | libgloss/ChangeLog | 3011 |
1 files changed, 0 insertions, 3011 deletions
diff --git a/libgloss/ChangeLog b/libgloss/ChangeLog deleted file mode 100644 index c5fadb8..0000000 --- a/libgloss/ChangeLog +++ /dev/null @@ -1,3011 +0,0 @@ -Wed May 24 16:47:12 2000 Alexandre Oliva <aoliva@cygnus.com> - - * mn10300/time.c (time): Set *tloc, since the sim doesn't. - -Mon Jan 31 18:45:26 2000 Donald Lindsay <dlindsay@cygnus.com> - - * mips/crt0.S: If compiled into a mips2 multilib, sets processor - status register for 32 bit addressing - * mips/regs.S: Add symbols for status and config register fields. - * mips/vr5xxx.S: Variant of vr300.S with extensions to __cpu_flush() - to cope with Vr5000 secondary cache and with Vr5432 CACHE instruction. - * mips/Makefile.in: Add rule for forming vr5xxx.o. - * mips/configure.in: Add case arm for mips64vr5000 since the - default (which was previously used) should not get vr5xxx.o. - -Wed Dec 22 19:08:09 1999 Christopher Faylor <cgf@cygnus.com> - - * wince/Makefile.am: Use LDADD from configure. - * wince/Makefile.in: Regenerate. - * wince/configure.in: Determine libraries needed based (crudely) on - target. - * wince/configure: Regenerate. - -1999-12-16 Tom Tromey <tromey@cygnus.com> - - * mips/Makefile.in (jmr3904-io.o): Don't compile with `-mips3'. - - * mips/jmr3904-io.c: Actually completed merge of Andrew Haley's - patch of 1998-11-23. - - * mips/jmr3904dram-java.ld: Provide _Jv_QthreadsStackSize. Link - against -lgcjcoop, not -lqthreads. - * mips/jmr3904app-java.ld: Provide _Jv_QthreadsStackSize. - -1999-12-16 Brendan Kehoe <brendan@cygnus.com> - - * m68k/idp.ld: Only use specific .dtors and .ctors uses of KEEP, - without the bits for __{C,D}TOR_{LIST,END}__. - -1999-12-14 Geoff Keating <geoffk@cygnus.com> - - * m68k/idp.ld (.text): Put crtbegin at the start of the - constructors and destructors. - -Mon Nov 29 12:14:48 1999 Christopher Faylor <cgf@cygnus.com> - - * wince/Makefile.am: Add missing gdbdir assignment. - * wince/Makefile.in: Regenerate. - -1999-11-22 Gavin Romig-Koch <gavin@cygnus.com> - - * mips/idt.ld: Remove the OUTPUT_ARCH("mips:4000") directive. - -1999-11-15 Nick Clifton <nickc@cygnus.com> - - * configure.in: Add arm-wince-pe target. - * configure: Regenerate. - -1999-11-11 Brendan Kehoe <brendan@cygnus.com> - - * sparc/elfsim.ld (.text): Also provide __EH_FRAME_BEGIN__ since we're - not bringing in crtbegin.o. - * sparc/sparc86x.ld (.text): Likewise. Add initp support. - -1999-10-30 Geoffrey Keating <geoffk@cygnus.com> - - * mips/crt0.S: Handle -membedded-pic properly. Set the $gp much - earlier because it'll be needed. Set the high bits of the PC to - be consistent with other pointers, so that exception handling - doesn't get confused. - -1999-09-27 Jonathan Larmour <jlarmour@cygnus.co.uk> - - * sparc/crt0.s: Delete. This file is obsolete and caused problems - on case-insensitive windows filesystems. - -Wed Sep 22 15:59:17 1999 Christopher Faylor <cgf@cygnus.com> - - * configure.in: Generalize Windows CE target detection. - * configure: Regenerate. - * wince/Makefile.am: Rename CE stub filename. - * wince/Makefile.in: Regenerate. - * wince/configure.in: Allow changing of CE stub. - * wince/configure: Regenerate. - -1999-07-26 Andrew Haley <aph@cygnus.com> - - * m32r/crt0.S (_start): Use a full word immediate for __bss_start - and _end to allow them to be placed anywhere in memory. - -1999-07-08 Jason Merrill <jason@yorick.cygnus.com> - - * sparc/elfsim.ld: Provide initp support. - -1999-06-22 Nick Clifton <nickc@cygnus.com> - - * mips/dve.ld (.rdata): Rename section to .rodata. - * mips/idt.ld (.rdata): Rename section to .rodata. - * mips/jmr3904app-java.ld (.rdata): Rename section to .rodata. - * mips/jmr3904app.ld (.rdata): Rename section to .rodata. - * mips/lsi.ld (.rdata): Rename section to .rodata. - * mips/nullmon.ld (.rdata): Rename section to .rodata. - * mips/pmon.ld (.rdata): Rename section to .rodata. - * mips/r5900.ld (.rdata): Rename section to .rodata. - * mips/sky.ld (.rdata): Rename section to .rodata. - * mips/vpu.ld (.rdata): Rename section to .rodata. - -Tue Jun 01 16:57:46 1999 Jeff Johnston <jjohnstn@cygnus.com> - - * libnosys/configure.in: Added setting of ac_file - prior to calling config-ml.in. - * libnosys/configure: Regenerated. - * libnosys/Makefile.in: Added code to make install directory - for libnosys.a prior to installing. - -Wed May 26 17:22:46 1999 Christopher Faylor <cgf@cygnus.com> - - * Makefile.am: Expect the object file to be in the - current directory. - * Makefile.in: Regenerate. - -Tue May 25 14:35:21 1999 Christopher Faylor <cgf@cygnus.com> - - * configure.in: Add wince targest. - * configure: Regenerate. - * wince: New directory - * wince/Makefile.am: New file. - * wince/Makefile.in: New file. - * wince/aclocal.m4: New file. - * wince/configure: New file. - * wince/configure.in: New file. - -1999-05-24 Jim Wilson <wilson@cygnus.com> - - * sparc/elfsim.ld: Add `.data.*'. - -1999-05-22 Jason Merrill <jason@yorick.cygnus.com> - - * m68k/idp.ld: Add initp support. - * sparc/cygmon.ld.src: Likewise. - -1999-05-14 Nick Clifton <nickc@cygnus.com> - - * mcore/syscalls.S (_sbrk): Round to 8 bytes not 4. - -1999-05-13 Mark Salter <msalter@cygnus.com> - - * mcore/configure.in: Fixed multilib support. - * mcore/configure: Regenerated. - * mcore/Makefile.in: Fixed multilib problems. - Added cmb board support - * mcore/close.c: New file. - * mcore/cmb-exit.c: Ditto. - * mcore/cmb-inbyte.c: Ditto. - * mcore/cmb-outbyte.c: Ditto. - * mcore/elf-cmb.ld: Ditto. - * mcore/elf-cmb.specs: Ditto. - * mcore/fstat.c: Ditto. - * mcore/getpid.c: Ditto. - * mcore/kill.c: Ditto. - * mcore/lseek.c: Ditto. - * mcore/open.c: Ditto. - * mcore/pe-cmb.ld: Ditto. - * mcore/pe-cmb.specs: Ditto. - * mcore/print.c: Ditto. - * mcore/putnum.c: Ditto. - * mcore/raise.c: Ditto. - * mcore/read.c: Ditto. - * mcore/sbrk.c: Ditto. - * mcore/stat.c: Ditto. - * mcore/unlink.c: Ditto. - * mcore/write.c: Ditto. - * mcore/c-syscalls.c: Removed. - -1999-05-07 Nick Clifton <nickc@cygnus.com> - - * mcore/syscalls.S (_write): Use 0x50FF instead of trap 1. - Tidy up code layout. - -1999-05-06 Nick Clifton <nickc@cygnus.com> - - * mcore/Makefile.in: Fix build rule. - * mcore/syscalls.s: Rename to syscalls.S - -1999-05-04 Nick Clifton <nickc@cygnus.com> - - * mcore/configure.in: Depend upon crt0.S not crt0.s. - * mcore/configure: Regenerate. - -1999-04-29 Nick Clifton <nickc@cygnus.com> - - * mcore/crt0.S: Renamed file from crt0.s. - Only invoke init() and fini() routines for ELF builds. - Use __bss_start__ and __bss_end__ to locate .bss section. - -1999-04-26 Angela Marie Thomas <angela@cygnus.com> - - * mips/array.ld: Fix ELF ctor/dtor support. - * mips/ddb.ld: Likewise. - * mips/dve.ld: Likewise. - * mips/idt.ld: Likewise. - * mips/jmr3904app.ld: Likewise. - * mips/lsi.ld: Likewise. - * mips/nullmon.ld: Likewise. - * mips/pmon.ld: Likewise. - * mips/r5900.ld: Likewise. - * mips/sky.ld: Likewise. - * mips/vpu.ld: Likewise. - -1999-04-22 Nick Clifton <nickc@cygnus.com> - - * mcore/crt0.s: Initialise data section, call _init and _fini. - - * mcore/syscalls.s (_exit): Renamed from __exit. - - * fr30/crt0.s (_start): Initialise arg[cv] after calling _init and - atexit. - -1999-04-21 Nick Clifton <nickc@cygnus.com> - - * mcore/crt0.s (_start): Use .long directive, not .word. - - * mcore/syscalls.s (_sbrk): fix syntax. - -1999-04-20 Jason Molenda (jsm@bugshack.cygnus.com) - - * sparc/sparc86.ld: Set alignment for the .data section. - -1999-04-18 Nick Clifton <nickc@cygnus.com> - - * configure.in: Add support for mcore targets. - * configure: Regenerate. - * mcore: New directory. - * mcore/Makefile.in: New File: meta Makefile. - * mcore/configure.in: New File: meta configure file.. - * mcore/configure: New File: Generated. - * mcore/crt0.s: New File: mcore startup code. - * mcore/syscalls.s: New File: Assembler system call stubs. - * mcore/c-syscalls.c: New File: C system call stubs. - -Tue Apr 13 17:20:34 1999 Catherine Moore <clm@cygnus.com> - - * mips/array.ld: Support linkonce sections. - * mips/ddb.ld: Likewise. - * mips/dve.ld: Likewise. - * mips/idt.ld: Likewise. - * mips/jmr3904app.ld: Likewise. - * mips/jmr3904app-java.ld: Likewise. - * mips/jmr3904dram.ld: Likewise. - * mips/jmr3904dram-java.ld: Likewise. - * mips/lsi.ld: Likewise. - * mips/nullmon.ld: Likewise. - * mips/pmon.ld: Likewise. - * mips/r5900.ld: Likewise. - * mips/sky.ld: Likewise. - * mips/vpu.ld: Likewise. - -Mon Apr 12 21:01:46 1999 Catherine Moore <clm@cygnus.com> - - * mips/array.ld: Add ELF ctor/dtor support. - * mips/ddb.ld: Likewise. - * mips/dve.ld: Likewise. - * mips/idt.ld: Likewise. - * mips/jmr3904app.ld: Likewise. - * mips/lsi.ld: Likewise. - * mips/nullmon.ld: Likewise. - * mips/pmon.ld: Likewise. - * mips/r5900.ld: Likewise. - * mips/sky.ld: Likewise. - * mips/vpu.ld: Likewise. - -Sun Apr 11 00:43:34 1999 Jim Wilson <wilson@cygnus.com> - - * i960/crt0.c (_start): Increase stack size to 256K. - -Wed Mar 31 17:56:41 1999 Bob Manson <manson@charmed.cygnus.com> - - * i386/cygmon-salib.c: Add read and write syscall support. - * i386/cygmon-syscall.h: Ditto. - - * i386/cygmon-gmon.[ch]: Profile support. - -Sun Feb 28 23:39:32 1999 Geoffrey Noer <noer@cygnus.com> - - * libnosys/configure.in: Check cygwin*, not cygwin32. - * libnosys/configure: Regenerate. - -1999-02-18 Tom Tromey <tromey@cygnus.com> - - * mips/configure: Rebuilt. - * mips/configure.in (script_list): Added jmr3904dram-java and - jmr3904app-java. - * mips/jmr3904dram-java.ld: New file. - * mips/jmr3904dram.ld: Don't mention -lqthreads. - * mips/jmr3904app-java.ld: New file. - * mips/jmr3904app.ld: Don't mention -lgcjcoop. - -Wed Feb 17 13:27:24 1999 Jim Wilson <wilson@cygnus.com> - - * m68k/crt0.S (start): Use jpbl not jmi in coldfire code. - -1999-02-18 Tom Tromey <tromey@cygnus.com> - - * Merge from branch: - - Tue Feb 16 12:57:06 PST 1999 Angela Marie Thomas <angela@cygnus.com> - - * mips/jmr3904app.ld: Change -lqthreads to -lgcjcoop due to - library name change. - - Thu Feb 4 16:15:44 1999 Warren Levy <warrenl@cygnus.com> - - * mips/configure.in (script_list): Added jmr3904dram.ld. - * mips/configure: Rebuilt. - - Thu Jan 21 19:11:45 1999 Warren Levy <warrenl@cygnus.com> - - * mips/jmr3904dram.ld: Created. - - Wed Dec 30 11:15:46 1998 Anthony Green <green@cygnus.com> - - * mips/jmr3904app.ld: libgcc is dependent on libqthreads, so - it must be linked it. - - Wed Dec 30 11:04:54 1998 Anthony Green <green@cygnus.com> - - * mips/jmr3904app.ld: Make sure the stack owns all 8k plus - the padding allocated for alignment. - - 1998-11-23 Andrew Haley <aph@viagra.cygnus.co.uk> - - * mips/jmr3904-io.c: change get_mem_info() to use _mem_size - imported from the linker script. - * mips/jmr3904app.ld: Provide _mem_size. - - * mips/jmr3904app.ld: Allocate 8k bytes for stack. - - 1998-11-19 Andrew Haley <aph@viagra.cygnus.co.uk> - - * mips/crt0.S: set argc to 0 before calling main() - * get_mem_info() was incorrect; jmr3904 has 1M max of SRAM. - - Wed Nov 4 15:28:44 1998 Anthony Green <green@cygnus.com> - - * mips/jmr3904-io.c: Implement get_mem_info(). - - Wed Nov 4 15:22:41 1998 Anthony Green <green@cygnus.com> - - * mips/Makefile.in: Rename libtx39jmr.a to libjmr3904.a. - * mips/configure.in: Ditto. - * mips/configure: Regenerate. - - Tue Nov 3 15:39:14 1998 Angela Marie Thomas (angela@cygnus.com) - - * mips/configure.in: Add jmr3904app to script list for tx39. - * mips/configure: Regenerate. - -1999-02-08 Nick Clifton <nickc@cygnus.com> - - * libnosys/configure.in: Add support for StrongARM target. - * libnosys/configure: Regenerate. - -Thu Feb 4 10:56:59 1999 Jeff Johnston <jjohnstn@cygnus.com> - - * d30v/syscalls.c (time): Added code to honor argument - passed to time which is either a pointer to a time_t - value to set or is the NULL pointer. - -1999-02-03 Keith Seitz <keiths@cygnus.com> - - * m32r/m32r-lib.c (rx_char): Rename rx_uchar and return - only unsigned chars. - (getDebugChar2): Remove and integrate support into "M" - packet code. - -1999-01-29 Doug Evans <devans@casey.cygnus.com> - - * sparc/erc32-crt0.S (_exit): Set magic number for simulator. - * sparc/traps.S (win_flush): Make sure %sp is valid before flushing - all windows. - -Tue Jan 19 06:19:51 1999 Jeffrey A Law (law@cygnus.com) - - * mn10300/crt0.S: Use ".stack" for the name of the stack section, - not "._stack". Remove mn10200 support. - * mn10300/trap.S: Remove mn10200 support. - * mn10300/sim.ld: Collect *(.stack) *(._stack) input sections into - the .stack output section to be safe. - * mn10300/eval.ld: Likewise. - - * mn10200/crt0.S: Use ".stack" for the name of the stack section, - not "._stack". - * mn10200/sim.ld: Collect *(.stack) *(._stack) input sections into - the .stack output section to be safe. - * mn10200/eval.ld: Likewise. - -1999-01-14 Nick Clifton <nickc@cygnus.com> - - * fr30/Makefile.in: Set target of install to be SIM_INSTALL not - MON_INSTALL. - - * fr30/crt0.s (_start): Use atexit to call C++ global - destructors. Patch from Mark Salter <msalter@cygnus.com> - -1999-01-12 Nick Clifton <nickc@cygnus.com> - - * fr30/crt0.s: Remove .stack section - it is no longer necessary. - -1999-01-11 Nick Clifton <nickc@cygnus.com> - - * fr30/crt0.s (_start): Add calls to _init and _fini for C++ - global constructor/destructor support. - -1999-01-07 Nick Clifton <nickc@cygnus.com> - - * fr30/crt0.s (_start): Apply patch from Mark Salter - <msalter@cygnus.com> to cope with initialising .bss areas that are - not word sized. - -1998-12-23 Michael Meissner <meissner@cygnus.com> - - * m68k/idp.ld (.eh_frame): Add section to the .text segment. - (__{INIT,FINI}__SECTION__): Align to a 4 byte boundary. - (.gcc_except_table): Ditto. - -Mon Dec 21 22:45:05 1998 Mark Alexander <marka@cygnus.com> - - * sh/sh1lcevb.ld: Add DWARF sections. - * sh/sh2lcevb.ld: Ditto. - * sh/sh3lcevb.ld: Ditto. - * sh/sh3bb.ld: Ditto. - -Fri Dec 18 22:07:21 1998 Bob Manson <manson@charmed.cygnus.com> - - * i386/cygmon.ld: Make sure -lcygmon appears both before - and after -lc, so we pick up functions from there in - preference to libc functions. - - * i386/cygmon-salib.c: Add syscalls for time and gettimeofday. - Don't add __do_global_ctors () and __do_global_dtors () if - we're on a coff target. - (open): Add dummy function so plumhall will compile. - (clock): Replacement for clock () syscall that uses - gettimeofday(). - - -1998-12-18 Gavin Romig-Koch <gavin@cygnus.com> - - * mips/Makefile.in, mips/vr4300.S: Move the -mips3 into vr4300.S. - -1998-12-17 Nick Clifton <nickc@cygnus.com> - - * fr30/syscalls.c: Include ../syscall.h not ../../sim/fr30/targ-vals.h - (_open): Return file descriptor allocated by simulator. - (isatty): Always false to avoid having to cope with reads from - stdin. For Now... - -1998-12-16 Nick Clifton <nickc@cygnus.com> - - * fr30/Makefile.in: Add libraries to clean target. - - * fr30/syscalls.c (_write): Save length so that it can be returned - to caller. - - * fr30/crt0.s (_start): Initialise argc, argv and envp before - calling main(). - -1998-12-15 Gavin Romig-Koch <gavin@cygnus.com> - - * mips/ddb.ld (OUTPUT_ARCH): Remove. - -1998-12-12 Nick Clifton <nickc@cygnus.com> - - * fr30/syscalls.c: Remove stub for abort and add stubs for _kill - and _getpid. - -1998-12-11 Nick Clifton <nickc@cygnus.com> - - * configure.in: Add support for fr30 target. - * configure: Regenerate. - * fr30: New directory. - * fr30/Makefile.am: New file - build crt0.o and libsim.a - * fr30/Makefile.in: New file - generate from Makefile.am. - * fr30/configure.in: New file - support fr30 target - * fr30/configure: New file - generate from configure.in. - * fr30/crt0.s: New file - Basic executable startup code. - * fr30/syscalls.c: New file - System call emulation library. - -1998-12-11 Gavin Romig-Koch <gavin@cygnus.com> - - * mips/crt0.S (_start): Change initialization of FR. - -1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com> - - * i960/crt0.c (set_stack): Change return type to void. Init SP to - FP + 64 instead of FP. Simplify code to align ptr. - (_start): Call exit instead of _exit. Delete local variable stack. - Init stack to heap+4096. - * i960/mon960.c (abort): Ifdef out. - * i960/syscall.h: New file. - -1998-12-04 Ken Raeburn <raeburn@cygnus.com> - - * mips/cma101.c (time): Add heuristic to handle Y2K overflow. - -Tue Dec 1 17:57:52 1998 Stan Shebs <shebs@andros.cygnus.com> - - * config/ppc.mh (.s.o): Don't use CFLAGS_MRELOCATABLE when - assembling. - -Wed Nov 18 19:14:15 1998 Jim Wilson <wilson@cygnus.com> - - * mips/entry.S: Handle mips16 builds. - -1998-10-30 Ian Molee <imolee@cygnus.com> - - * m32r/trapmon0.c: New file. Mon2000 trap handler. - * m32r/trapmon0.S: Removed. - * m32/Makefile.in: Changed to reflect above-changed files. - -Wed Oct 28 07:55:55 1998 Mark Alexander <marka@cygnus.com> - - * sparc/crt0.S: Move entry point to start of text section. - Put the address of the data section at the start of the section, - so the GDB sparclite loader can find it for a.out loads. - -Mon Oct 26 13:11:41 1998 Jeffrey A Law (law@cygnus.com) - - * d30v/syscalls.c (time): Returns a time_t and accepts a pointer to - a time_t as its argument. - - * i386/cygmon-syscall.h: Fix bogus asm constraints. You must not - clobber a register that overlaps with an input or output. - -Fri Oct 23 11:06:16 1998 John Metzler <jmetzler@cygnus.com> - - * mips/jmr3904-io.c (hardware_init_hook): Add file to support - serial input and out put as required by libgloss read and write - functions. - - * mips/jmr3904app.ld : LInker script for tx39jmr3904 board. Uses - addresses per eCos conventions, not original ROM monitor. - - * configure.in: Add libtx39jmr.c to build target - - * Makefile.in: rules for libtx39jmr.a and jmr3904-io.o - -1998-10-15 Ian Molee <imolee@cygnus.com> - - * m32r/mon.specs: New file - * m32r/trapmon0.S: New file - * m32r/Makefile.in: Modified to add support for mon2000 trap0. - -Tue Oct 13 11:52:03 1998 Jeff Johnston <jjohnstn@cygnus.com> - - * libnosys/warning.h: New file. - -1998-10-06 Ken Raeburn <raeburn@cygnus.com> - - * mips/configure.in: Build nullmon stuff in default case. Don't - treat vr4100 specially. - -Tue Oct 6 15:17:42 1998 Jeff Johnston <jjohnstn@cygnus.com> - - * libnosys/sbrk.c (_sbrk): Added reference to config.h. - * libnosys/close.c (_close): Added stub warning outside of - function body and added reference to config.h. - * libnosys/execve.c (_execve): Ditto. - * libnosys/fork.c (_fork): Ditto. - * libnosys/fstat.c (_fstat): Ditto. - * libnosys/getpid.c (_getpid): Ditto. - * libnosys/gettod.c (_gettimeofday): Ditto. - * libnosys/isatty.c (_isatty): Ditto. - * libnosys/kill.c (_kill): Ditto. - * libnosys/link.c (_link): Ditto. - * libnosys/lseek.c (_lseek): Ditto. - * libnosys/open.c (_open): Ditto. - * libnosys/read.c (_read): Ditto. - * libnosys/stat.c (_stat): Ditto. - * libnosys/times.c (_times): Ditto. - * libnosys/unlink.c (_unlink): Ditto. - * libnosys/wait.c (_wait): Ditto. - * libnosys/write.c (_write): Ditto. - * libnosys/acconfig.h: New file. - * libnosys/config.h.in: New file. - * libnosys/exit.c: Removed as _exit cannot be stubbed. - * libnosys/Makefile.in: Regenerated. - * libnosys/configure.in: Configure header file specified. - * libnosys/configure: Regenerated. - -Wed Sep 30 12:45:43 1998 Bob Manson <manson@charmed.cygnus.com> - - * i386/cygmon.ld: Increase memory limits; put the initial - executable above 1MB. - -Fri Sep 25 13:49:22 1998 Bob Manson <manson@charmed.cygnus.com> - - * i386/configure.in: Changed crt0.c to cygmon-salib.c. - -Wed Sep 23 19:25:46 1998 Bob Manson <manson@charmed.cygnus.com> - - * configure.in: Add i386-*-elf* triplet. - * i386/*: Support for i386 targets. - -Wed Sep 16 19:43:52 1998 Doug Evans <devans@canuck.cygnus.com> - - * m32r/m32r-lib.c: Rename -DMSA2000 to -DREVC and reverse test. - (exceptionHandler,getExceptionHandler): Add cast to avoid warning. - -Wed Sep 9 19:22:03 1998 Mark Alexander <marka@cygnus.com> - - * sparc/Makefile.in: Remove cache86x.o, not needed any more. - * sparc/sparclite.h: (read_asr, write_asr): Define. - * sparc/cache.c (is_danlite): New function. - (cache_off, cache_on, flush_i_cache): Test for DANlite. - * sparc/salib.c (update_leds): Allow user to disable LED flashing. - * sparc/sparc86x.ld: Prevent section overlap. - -1998-09-04 Keith Seitz <keiths@cygnus.com> - - * m32r/m32r-lib.c (rx_rdy): Add support for MSA2000G01 board. - (rx_char): Ditto. - (getDebugChar2): New function to support binary downloads (gdb - remote protocol "X" command). - (exceptionHandler): Add support for MSA2000G01 board. - (getExceptionHandler): Ditto. - -1998-08-20 Michael Meissner <meissner@cygnus.com> - - * libnosys/gettod.c: Include sys/time.h so that struct timezone is - declared. - -Sun Aug 16 10:46:43 1998 Mark Alexander <marka@cygnus.com> - - * sparc/Makefile.in: Add new BSP for sparc86x (DANlite). - * sparc/salib.c (outbyte): Add hook for GDB stub. - (cache_off, cache_on, flush_i_cache): Move to cache.c. - * sparc/cache.c: New file for sparclite-specific cache code. - * sparc/cache-86x.c: New file for sparc86x-specific cache code. - * sparc/sparc86x.ld: New linker script for sparc86x. - * sparc/crt0.S: Disable broken data relocation code. - * sparc/sparcl-stub.c (outbyte_stub): New function for redirecting - standard output to GDB. - (handle_exception): Initialize outbyte hook. - -Tue Aug 11 13:27:31 1998 Jim Wilson <wilson@cygnus.com> - - * m68k/idp.ld (__INIT_SECTION__): Align to 2 byte boundary. - * m68k/bcc.ld, m68k/mvme135.ld, m68k/mvme162.ld: Likewise. - * m68k/sbc5204.ld, m68k/sbc5206.ld: Likewise. - -1998-08-11 Jason Merrill <jason@yorick.cygnus.com> - - * mn10300/{sim.ld,eval.ld}: Add init_priority support. - -Tue Aug 11 10:04:05 1998 Jeffrey A Law (law@cygnus.com) - - * mn10200/sim.ld: Rework code to insert pad before the start of the - data segment. - * mn10200/eval.ld: Likewise. - * mn10300/sim.ld: Likewise. - * mn10300/eval.ld: Likewise. - -Sat Aug 8 09:46:37 1998 Jim Wilson <wilson@cygnus.com> - - * mips/cma101.c (__sizemem): New local variable extra. Align base - to int boundary. - -Tue Jul 28 10:57:12 1998 Mark Alexander <marka@cygnus.com> - - * sparc/Makefile.in (ERC32_OBJS): Add fixctors. - * sparc/erc32-crt0.S: Call __fix_ctors just before calling main. - * sparc/fixctors.c: New file. - -Sat Jul 18 07:15:33 1998 Mark Alexander <marka@cygnus.com> - - * sparc/crt0.S (win_ovf_trap, win_unf_trap): Use correct names for - extern functions win_ovf and win_unf; fixes unresolved symbols - in COFF. - -Mon Jul 13 17:50:41 1998 Jeff Johnston <jjohnstn@cygnus.com> - - * configure.in: Added libnosys as subdir. - * configure: Rebuilt configure based on configure.in. - * libnosys/close.c (_close): Part of new libnosys stub library - to use for situations with no operating system support. - * libnosys/environ.c (environ): ditto. - * libnosys/execve.c (_execve): ditto. - * libnosys/exit.c (_exit): ditto. - * libnosys/fork.c (_fork): ditto. - * libnosys/fstat.c (_fstat): ditto. - * libnosys/getpid.c (_getpid): ditto. - * libnosys/gettod.c (_gettimeofday): ditto. - * libnosys/isatty.c (_isatty): ditto. - * libnosys/kill.c (_kill): ditto. - * libnosys/link.c (_link): ditto. - * libnosys/lseek.c (_lseek): ditto. - * libnosys/open.c (_open): ditto. - * libnosys/read.c (_read): ditto. - * libnosys/sbrk.c (_sbrk): ditto. - * libnosys/stat.c (_stat): ditto. - * libnosys/times.c (_times): ditto. - * libnosys/unlink.c (_unlink): ditto. - * libnosys/wait.c (_wait): ditto. - * libnosys/write.c (_write): ditto. - * libnosys/Makefile.in : Makefile.in for creating libnosys Makefile. - * libnosys/configure.in: configure.in to create libnosys configure. - * libnosys/configure: Configure for libnosys library. - -Mon Jul 13 14:13:07 EDT 1998 Jim Lemke <jlemke@cygnus.com> - - * sim/mips.ld: Clarify a comment. - -Tue Jul 7 21:12:41 1998 Mark Alexander <marka@cygnus.com> - - * sparc/elfsim.ld: Make it work on both a.out and ELF. - * sparc/traps.S: Rename trap_table label to work on both a.out - and ELF. Put the address of the data section at the start - of the section, so the simulator loader can find it for a.out loads. - -Thu Jun 25 09:24:53 1998 Mark Alexander <marka@cygnus.com> - - * config/mn10200.mt: New file. - -Tue Jun 23 22:45:49 1998 Mark Alexander <marka@cygnus.com> - - * mn10200/crt0.S: Don't waste top four bytes of stack. - * mn10200/eval.ld: Fix stack top address. - -Mon Jun 22 09:30:22 1998 Drew Moseley <dmoseley@cygnus.com> - - * mips/dvemon.c: Remove the close function and get it from the generic - close.o - * mips/Makefile.in (DVEOBJS): Add generic open.o and close.o to the DVEOBJS - list to ensure that the proper API's are included. - -Wed Jun 17 12:33:05 1998 Mark Alexander <marka@cygnus.com> - - * configure.in: Add mn10200 support. - * configure: Regenerate. - * mn10200/Makefile.in: New file. - * mn10200/_exit.c: New file. - * mn10200/access.c: New file. - * mn10200/chmod.c: New file. - * mn10200/chown.c: New file. - * mn10200/close.c: New file. - * mn10200/configure: New file. - * mn10200/configure.in: New file. - * mn10200/creat.c: New file. - * mn10200/crt0.S: New file. - * mn10200/crt1.c: New file. - * mn10200/eval.ld: New file. - * mn10200/execv.c: New file. - * mn10200/execve.c: New file. - * mn10200/fork.c: New file. - * mn10200/fstat.c: New file. - * mn10200/getpid.c: New file. - * mn10200/gettime.c: New file. - * mn10200/isatty.c: New file. - * mn10200/kill.c: New file. - * mn10200/lseek.c: New file. - * mn10200/open.c: New file. - * mn10200/pipe.c: New file. - * mn10200/read.c: New file. - * mn10200/sbrk.c: New file. - * mn10200/sim.ld: New file. - * mn10200/stat.c: New file. - * mn10200/test.c: New file. - * mn10200/time.c: New file. - * mn10200/times.c: New file. - * mn10200/trap.S: New file. - * mn10200/trap.h: New file. - * mn10200/unlink.c: New file. - * mn10200/utime.c: New file. - * mn10200/wait.c: New file. - * mn10200/write.c: New file. - -Fri Jun 12 17:26:56 1998 Doug Evans <devans@seba.cygnus.com> - - * m32r/sys/syscall.h: Delete. Use ./syscall.h now. - * m32r/trap0.S: Renamed from trap.S. - * m32r/eit.h: New file. - * m32r/crtsysc.c: Delete, split up into several files. - * m32r/chmod.c: New file. - * m32r/close.c: New file. - * m32r/exit.c: New file. - * m32r/fstat.c: New file. - * m32r/getpid.c: New file. - * m32r/isatty.c: New file. - * m32r/kill.c: New file. - * m32r/lseek.c: New file. - * m32r/open.c: New file. - * m32r/raise.c: New file. - * m32r/read.c: New file. - * m32r/sbrk.c: New file. - * m32r/stat.c: New file. - * m32r/unlink.c: New file. - * m32r/utime.c: New file. - * m32r/write.c: New file. - * m32r/Makefile.in (SYSCALLS): Delete. - (LIBOBJS,LIBGLOSS): New variables. - (all,install): Update. - (libgloss.a): New rule. - -Thu Jun 11 08:38:42 1998 Doug Evans <devans@seba.cygnus.com> - - * sparc/cygmon-salib.c (setitimer): Add `const' to second arg. - (gettimeofday): Change type of 2nd arg to struct timezone *. - -Tue Jun 9 12:02:21 1998 Ian Carmichael <iancarm@cygnus.com> - - * mips/syscalls.c (sbrk): Allow memory allocation to work - for configurations which don't have memory at K1BASE. - * mips/cma101.c (__sizemem): Ditto. - -Tue Jun 9 13:17:28 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * m68k/emc-stub.c: New file, stub for the EMC Symmetrix target. - * m68k/gdbinit.emc: New file, user support for special features - supported only on the EMC Symmetrix target. - -Fri Jun 5 16:40:20 1998 Mark Alexander <marka@cygnus.com> - - * sparc/elfsim.ld: Fix ctor and dtor tables to work in both - little- and big-endian executables. - -Wed Jun 3 23:09:38 1998 Mark Alexander <marka@cygnus.com> - - * sparc/sparcl-stub.c: Include asm.h. Use STRINGSYM macro to generate - proper prefix for public assembly language labels. - * sparc/ex930.ld: Add DWARF sections. - * sparc/ex931.ld: Ditto. - * sparc/ex934.ld: Ditto. - * sparc/elfsim.ld: Simplify and clean up. - * sparc/Makefile.in: Build ex934 BSP. Allow little-endian builds. - * sparc/traps.S (win_flush): Rewrite using code from Cygmon - to eliminate register corruption. - -Mon Jun 1 15:21:05 1998 Geoffrey Noer <noer@cygnus.com> - - * sparc/cygmon-salib.c: Stop including sys/itimer.h - -Sun May 31 10:46:37 1998 Michael Meissner <meissner@cygnus.com> - - * rs6000/Makefile.in (SOLARIS_*): Don't build solaris bsp's any - more. - -Fri May 22 13:50:55 1998 Angela Marie Thomas (angela@cygnus.com) - - * mn10300/Makefile.in: Install sim.ld. - -Wed May 20 22:45:11 1998 Mark Alexander <marka@cygnus.com> - - * sparc/elfsim.ld: Add constructor and destructor tables. - -Sat May 16 17:08:17 1998 Bob Manson <manson@charmed.cygnus.com> - - * sparc/cygmon-salib.c (__getProgramArgs): Use asm constraints. - -Fri May 15 16:50:36 1998 Mark Alexander <marka@cygnus.com> - - * sparc/traps.S (win_flush): Don't destroy %g1 and %g2. - -Fri May 15 15:59:30 1998 Gavin Koch <gavin@cygnus.com> - - * mips/configure.in: Add idt to tx39 chain. - * mips/configure: Rebuild. - -Fri May 15 15:48:28 1998 Gavin Koch <gavin@cygnus.com> - - * mips/crt0.S (__stackbase): Added. - (zerobss): Initialize __stackbase. - -1998-05-13 Brendan Kehoe <brendan@cygnus.com> - - * mips/configure.in: Also grok `mipstx39*-*-*'. - * mips/configure: Regenerated. - -Mon May 11 15:07:12 1998 Bob Manson <manson@charmed.cygnus.com> - - * configure.in: Added powerpcle target. - * configure: Regenerated. - -Thu May 7 16:43:37 1998 Mark Alexander <marka@cygnus.com> - - * sparc/elfsim.ld (OUTPUT_FORMAT): Add little-endian support. - - * sparc/crt0.S (_start): Define label for ELF targets. - * sparc/salib.c: Include asm.h. Use STRINGSYM macro to generate - proper prefix for public assembly language labels. - (write, read): Disable to avoid conflict with generic versions - of these functions. - * sparc/erc32-stub.c: Move STRINGSYM macro to sparc/asm.h. - * sparc/asm.h: Move STRINGSYM macro here from sparc/erc32-stub.c - -Mon May 4 08:30:58 1998 Mark Alexander <marka@cygnus.com> - - * sparc/configure.in: Treat sparc86x as a sparclite. - * sparc/configure.in: Ditto. - * sparc/Makefile.in (slite-install): Install missing files - for simulator. - -Thu Apr 30 16:41:15 1998 John Metzler <jmetzler@cygnus.com> - - * mips/configure.in: adjust target type pattern to export nullmon.ld - * mips/configure: regenerated - -Mon Apr 27 21:38:18 1998 Mark Alexander <marka@cygnus.com> - - * configure.in: Added sparc86x configuration. - * configure: Ditto. - -Wed Apr 22 21:45:13 1998 Jeffrey A Law (law@cygnus.com) - - * mips/crt0.S: Increase stack alignment. - -Fri Apr 10 21:17:48 1998 Mark Alexander <marka@cygnus.com> - - * sparc/traps.S (win_flush): Prevent immediate window underflow - trap on return. Miscellaneous comment formatting cleanup. - -Tue Apr 7 18:34:51 1998 Mark Alexander <marka@cygnus.com> - - * sparc/elfsim.ld: Align BSS at 8-byte boundary. - -Mon Apr 6 13:12:32 1998 Mark Salter <msalter@chef.cygnus.com> - - * rs6000/ads-io.c (write): Added write(). - - * rs6000/Makefile.in: Changed objects used for libads to be - new ads specific object files instead of some mvme objects. - - * Added ads-io.c and ads-exit.c to provide function stubs which - are safe on ads board (SDS monitor). - - * rs6000/mbx-outbyte.c (outbyte): Foundry console output - is fixed, so re-enable output char quoting for mbx. - - * rs6000/mbx.specs: Added blank line to end of file. There - were link errors without it? - - * rs6000/mbx.specs: Use mbx.ld script for linking. - - * rs6000/mbx-outbyte.c: Don't quote characters. We don't want - gdb to display program output, yet. - - * rs6000/Makefile.in (install-mbx): Fixed install of mbx.specs - file. - - * rs6000/Makefile.in: Support for MBX EPPCBug monitor. - * rs6000/mbx-{exit,inbyte,outbyte,print}.c: New files for MBX. - * rs6000/mbx.ld,mbx.specs: New files for MBX. - -Wed Apr 1 21:42:40 1998 Mark Alexander <marka@cygnus.com> - - * sparc/elfsim.ld: New linker script for running ELF programs - in erc32 simulator. - * sparc/erc32-crt0.S: Disable copying of data segment. - * sparc/erc32-stub.c: Generate correct public name for breakinst. - * sparc/Makefile.in: Build erc32 library always. - -Thu Apr 2 11:24:32 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * mips/syscalls.c (sbrk): Check word size correct for - get_mem_info. - -Fri Mar 27 08:55:52 1998 Mark Alexander <marka@cygnus.com> - - * mips/crt0.S: Insert NOP before _start to keep GDB happy. - * mips/dve.ld: Eliminate references to VR4300. - -Thu Mar 26 19:47:36 1998 Mark Alexander <marka@cygnus.com> - - * mn10300/eval.ld: Don't use absolute path in SEARCH_DIR. - * mn10300/sim.ld: Ditto. - -Wed Mar 25 10:49:49 1998 Bob Manson <manson@charmed.cygnus.com> - - * sparc/cygmon-salib.c (__getProgramArgs): New function. - - * sparc/cygmon-crt0.S (init): Call __getProgramArgs. - - * configure.in: Added sparc64 configuration. - - * configure: Regenerated. - -Tue Mar 24 10:44:41 1998 Mark Alexander <marka@cygnus.com> - - * mn10300/Makefile.in: Install libraries, not just linker scripts. - -Tue Mar 24 09:52:28 1998 Mark Alexander <marka@cygnus.com> - - * config/mn10300.mt: New file - * mn10300/configure.in: Use mn10300.mt as target makefile fragment - instead of nothing at all. - * mn10300/configure: Ditto. - -Tue Mar 24 16:59:06 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk> - - * doc/configure: Regenerate with autoconf 2.12.1 to fix shell - issues for NT native builds. - -Mon Mar 16 18:51:11 1998 Bob Manson <manson@charmed.cygnus.com> - - * sparc/cygmon-crt0.S: Make start a global symbol (for the linker - script; we also need to make SYM(start) global). - -Wed Mar 11 10:24:39 1998 Stan Cox <scox@rtl.cygnus.com> - - * sparc/cygmon.ld.src (.debug*): Added dwarf sections. - -Fri Mar 6 23:41:54 1998 Bob Manson <manson@charmed.cygnus.com> - - * sparc/cygmon.ld.src: Use TARGET_RAM_START. - - * sparc/Makefile.in (SLITE_RAM_START): Add. - (SPARC_RAM_START): Add. - (SPARC64_RAM_START): Add. - (SLITE_ALL): Add cygmon object files and linker script. - slite-install: Install CygMon libraries and linker script. - -Mon Mar 2 19:36:12 1998 Michael Meissner <meissner@cygnus.com> - - * rs6000/ads.ld: Add default attributes to memory region. - * a29k/{p3dgps,sa29200{,b}}.ld: Ditto. - * hp74x/hppa.ld: Ditto. - * m68k/{bcc,idp,mvme{135,162},sbc520{4,6}}.ld: Ditto. - * pa/{op50n,w89k}.ld: Ditto. - * sh/{sh1{l,2,3}cevb,sh3bb}.ld: Ditto. - * sparc/{erc32,ex93{0,1,4}}.ld: Ditto. - -Fri Feb 27 17:15:35 1998 Mark Alexander <marka@cygnus.com> - - * mn10300/configure.in (AC_INIT): Use crt0.S instead of crt0-eval.S. - -Fri Feb 27 17:39:23 1998 Jeffrey A Law (law@cygnus.com) - - * configure.in: Use "mn10300" subdir for "mn10300-*-*". - -Mon Feb 23 20:29:42 1998 Mark Alexander <marka@cygnus.com> - - * mn10300/Makefile.in (GENOBJS): Remove system calls no longer - supported. - * mn10300/trap.h: Use generic syscall.h. - * mn10300/sys/syscall.h: Removed in favor of generic syscall.h. - -Mon Feb 23 16:19:17 1998 Gavin Koch <gavin@cygnus.com> - - * mips/Makefile.in (cma101.o): Add rule to explicitly use -mno-mips16. - * mips/cma101.c: Reverse my previous change. - Add #ifdef __mips16 then #error. - -Mon Feb 23 11:29:33 1998 Mark Alexander <marka@cygnus.com> - - * mn10300/Makefile.in: Add rules for building libeval.a. - * mn10300/configure: Don't use default.mt. - * mn10300/configure.in: Ditto. - * mn10300/eval.ld: Replace with modified version of default script. - - * mn10300/_exit.c: New file for libeval.a. - * mn10300/access.c: Ditto. - * mn10300/chmod.c: Ditto. - * mn10300/chown.c: Ditto. - * mn10300/close.c: Ditto. - * mn10300/creat.c: Ditto. - * mn10300/crt0.S: Ditto. - * mn10300/crt1.c: Ditto. - * mn10300/execv.c: Ditto. - * mn10300/execve.c: Ditto. - * mn10300/fork.c: Ditto. - * mn10300/fstat.c: Ditto. - * mn10300/getpid.c: Ditto. - * mn10300/gettime.c: Ditto. - * mn10300/isatty.c: Ditto. - * mn10300/kill.c: Ditto. - * mn10300/lseek.c: Ditto. - * mn10300/open.c: Ditto. - * mn10300/pipe.c: Ditto. - * mn10300/read.c: Ditto. - * mn10300/sbrk.c: Ditto. - * mn10300/sim.ld: Ditto. - * mn10300/stat.c: Ditto. - * mn10300/time.c: Ditto. - * mn10300/times.c: Ditto. - * mn10300/trap.S: Ditto. - * mn10300/trap.h: Ditto. - * mn10300/unlink.c: Ditto. - * mn10300/utime.c: Ditto. - * mn10300/wait.c: Ditto. - * mn10300/write.c: Ditto. - * mn10300/sys/syscall.h: Ditto. - -Fri Feb 20 17:19:22 1998 Gavin Koch <gavin@cygnus.com> - - * mips/cma101.c: #ifdef out whole file if mips16. - -Thu Feb 19 13:05:58 1998 Bob Manson <manson@charmed.cygnus.com> - - * i960/*: Revised. - -Wed Feb 18 12:00:20 1998 Jeff Johnston <jjohnstn@cygnus.com> - - * m68k/crt0.S (start): Fixed code that clears .bss. Code - was using dbra instruction and did not account for the fact - that the instruction branches until counter is -1, not 0. - -Tue Feb 17 18:21:52 1998 Mark Alexander <marka@cygnus.com> - - * mn10300/Makefile.in: New file for MN10300 eval board support. - * mn10300/configure: Ditto. - * mn10300/configure.in: Ditto. - * mn10300/crt0-eval.S: Ditto. - * mn10300/eval.ld: Ditto. - * mn10300/test.c: Ditto. - -Tue Feb 17 19:55:47 1998 Gavin Koch <gavin@cygnus.com> - - * mips/vr4300.S (__previous): Fix comment type-o in - previous change. - -Tue Feb 17 10:47:45 1998 Gavin Koch <gavin@cygnus.com> - - * mips/vr4300.S (__previous,baseaddr,res_baseaddr): - Figure the length of the exception handler at runtime - rather than compile time. - -Tue Feb 3 14:07:51 1998 Ian Lance Taylor <ian@cygnus.com> - - * configure.in: When running config-ml.in, put --enable-multilib - before ac_configure_args, so that --disable-multilib can override - it. - * configure: Rebuild. - -Fri Jan 9 17:10:59 1998 Mark Alexander <marka@cygnus.com> - - * mips/Makefile.in (LSIOBJS, DVEOBJS): Add part-specific objects. - -Mon Jan 5 17:01:45 1998 Mark Alexander <marka@cygnus.com> - - * config/mips.mt: Add rules for read.o and write.o. - * mips/dvemon.c: New file to support Densan DVE-R3900 board. - * mips/dve.ld: New file to support Densan DVE-R3900 board. - * mips/Makefile.in: Add rules for Densan support library libdve.a. - * mips/configure.in: Build libdve.a for tx39 targets. - * mips/configure: Ditto. - -Tue Dec 30 15:34:17 1997 Bob Manson <manson@charmed.cygnus.com> - - * sparc/Makefile.in: Add define for TARGET_CPU_$(CPU). - - * sparc/cygmon-salib.c: If TARGET_CPU_SPARC64, include - sys/types.h, and define _open_r, _close_r, etc. - -Sun Dec 28 17:15:50 1997 Bob Manson <manson@charmed.cygnus.com> - - * sparc/cygmon-salib.c (_open_r, _close_r): New functions. - (read, write): If the fd isn't 0, 1, or 2, return an error. - -Fri Dec 26 18:45:28 1997 Bob Manson <manson@charmed.cygnus.com> - - * sparc/cygmon-salib.c (_sbrk_r, _fstat_r,_brk_r): Define. - - * sparc/cygmon-crt0.S: Zero out %fp so backtraces from gdb work - properly. - - * sparc/configure.in: Set CYGMONLDSCRIPTTEMPL appropriately. - - * sparc/Makefile.in ($(objdir)/cygmon.ld): Use CYGMONLDSCRIPTTEMPL - to determine what template file we use. - -1997-12-22 Felix Lee <flee@cygnus.com> - - * rs6000/sim-errno.c (_cerror): need to return -1. - * rs6000/sol-cfuncs.c (_cerror): likewise. - -Mon Dec 22 16:54:31 1997 Bob Manson <manson@charmed.cygnus.com> - - * sparc/cygmon-crt0.S: Add stack bias code if TARGET_CPU_SPARC64 is - defined. Allocate 128 bytes for a frame if sparc64. - - * sparc/cygmon.ld.src: New file, replaced cygmon.ld. - - * sparc/Makefile.in (SPARC_OBJ_FORMAT): Added. - (SPARC64_ALL,SPARC64_INSTALL,SPARC64_OBJ_FORMAT): Added. - ($(objdir)/cygmon.ld): Create from $(objdir)/cygmon.ld.src. - - * sparc/configure.in: Add sparc64 to CPU list. - * sparc/configure: Regenerated. - * configure: Regenerated. - -Sun Dec 21 18:19:27 1997 Bob Manson <manson@charmed.cygnus.com> - - * configure.in: Added sparc64-elf configuration. - -Wed Dec 10 19:15:26 1997 Andrew Cagney <cagney@b1.cygnus.com> - - * mips/pmon.ld, mips/ddb.ld: Add handling of DWARF - sections. Copied from mips/idt.ld. - -Wed Dec 10 12:31:04 1997 Mark Alexander <marka@cygnus.com> - - * mips/configure: Add entry.o to LSI library. - * mips/configure.in: Ditto. - * mips/crt0.S: Declare init hooks as .text to avoid linker errors. - * mips/pmon.S: Don't use 64-bit instructions on 32-bit EABI machines. - * mips/entry.S: New file (MIPS16 entry/exit exception handler). - -Tue Dec 9 18:51:45 1997 Michael Meissner <meissner@cygnus.com> - - * d30v/crt0.S (_start): Don't load r1 with 32 anymore. Zero out - the 3 bss areas. - -Fri Nov 28 22:34:14 1997 Bob Manson <manson@charmed.cygnus.com> - - * sparc/cygmon-salib.c (open): New syscall. - - * sparc/cygmon.ld: Add gcc_except_table section. - - * sparc/cygmon-crt0.S: Call __install_signal_handler. - Run ctors/dtors as appropriate. - - * sparc/cygmon-salib.c (gettimeofday): New syscall. - (stime): Ditto. - (add_mapping): Ditto. - (remove_mapping): Ditto. - (__install_signal_handler): Ditto. - -Wed Nov 26 15:25:11 1997 Michael Meissner <meissner@cygnus.com> - - * rs6000/mcount.S: New file to in case no profiling module was - defined. - - * rs6000/Makefile.in (OBJS): Add mcount.o - (mcount.o): Depend on mcount.S. - -Mon Nov 24 23:25:07 1997 Bob Manson <manson@charmed.cygnus.com> - - * sparc/cygmon.ld: Add linkonce sections. - -Mon Nov 24 18:42:55 1997 Michael Meissner <meissner@cygnus.com> - - * d30v/syscalls.c (__syscall): Correct setting errno. - -Sun Nov 23 17:49:45 1997 Bob Manson <manson@charmed.cygnus.com> - - * sparc/Makefile.in: Removed TARGET_CFLAGS. - * sparc/configure.in: Ditto. - * sparc/configure: Regenerated. - -Fri Nov 21 21:21:23 1997 Michael Meissner <meissner@cygnus.com> - - * syscall.h: Remove d30v from comments. - - * d30v/syscalls.c: Use common syscall.h file, move setting errno - into common function, rather than have each stub do it. - - * d30v/Makefile.in (syscalls.c): Use common syscall.h, not the old - d30v specific version. - (clean): Properly remove libraries. - - * d30v/sys/syscall.h: Delete. - -Wed Nov 19 16:13:00 1997 Doug Evans <devans@seba.cygnus.com> - - * rs6000/Makefile.in (unlink.o): Add rule for. - - * syscall.h: New file. - -Tue Nov 18 17:22:18 1997 Doug Evans <devans@seba.cygnus.com> - - * sparc/asm.h (CONCAT1): Use __USER_LABEL_PREFIX__. - - * sparc/Makefile.in: Reorganize file. - - * sparc/Makefile.in: Rename all occurences of SIM to ERC32. - (all): Don't build erc32 support any more (never installed anyway). - * sparc/erc32-io.c: Renamed from sim-io.c. - * sparc/erc32-stub.c: Renamed from sim-stub.c. - * sparc/erc32-crt0.S: Renamed from sim-crt0.S. - * sparc/erc32.ld: Renamed from sim.ld. - * sparc/configure.in (AC_INIT): Update. - * sparc/configure: Regenerate. - -Tue Nov 18 13:54:46 1997 Michael Meissner <meissner@cygnus.com> - - * d30v/syscalls.c: New file to provide system call stubs. - * d30v/sys/syscall.h: New file to provide system call numbers. - * d30v/sim-{exit,read,write}.S: Delete, no longer used. - * d30v/Makefile.in: Remove old system stubs, and use the new ones - in syscalls.c. - -Tue Nov 18 12:38:37 1997 Michael Meissner <meissner@cygnus.com> - - * d30v/sys/syscall.h: Define for d30v system calls. - -Mon Nov 17 22:04:04 1997 Bob Manson <manson@charmed.cygnus.com> - - * configure.in: Configure the sparc directory for the sparc-elf - toolchain. - * configure: Regenerated. - - * sparc/Makefile.in: For a generic sparc toolchain, build the cygmon - crt0 and install the cygmon linker script. - - * sparc/asm.h (USER_LABEL_PREFIX): If it's already defined, don't - redefine it. - - * sparc/configure.in: Add LIB_AC_PROG_CC. Add TARGET_CFLAGS - subst variable. - * sparc/configure: Regenerated. - - * sparc/cygmon.ld: New file. - * sparc/cygmon-crt0.S: New file. - * sparc/cygmon-salib.c: New file. - -Sun Nov 16 20:22:22 1997 Michael Meissner <meissner@cygnus.com> - - * d30v/crt0.S (_start): Set up stack pointer to end of internal - memory by default. - -Tue Nov 11 17:43:06 1997 Michael Meissner <meissner@cygnus.com> - - * d30v/Makefile.in (OBJS): Use print.o, not print.c. Add sbrk.o. - -Mon Nov 10 13:57:40 1997 Michael Meissner <meissner@cygnus.com> - - * configure.in (d30v-*-*): Add configuration. - * configure: Regenerate. - - * d30v/{crt0,sim-{read,write,exit}}.S: Correct typos. - * d30v/Makefile.in: Ditto. - -Sat Nov 8 14:38:57 1997 Michael Meissner <meissner@cygnus.com> - - * d30v/crt0.S: New file for d30v port. - * d30v/configure{,.in}: Ditto. - * d30v/Makefile.in: Ditto. - * d30v/{in,out}byte.c: Ditto. - * d30v/sim-{read,write,exit}.c: Ditto. - -Tue Sep 16 15:21:08 1997 Gavin Koch <gavin@cygnus.com> - - * mips/Makefile.in (vr4300.o): Reinstate command, it's will - be necessary until all hosts properly set BSP in configure.in. - -Mon Sep 15 16:20:29 1997 Bob Manson <manson@charmed.cygnus.com> - - * m68k/*.ld: Add underscore versions of __CTOR_LIST__ and - __DTOR_LIST__. - -Mon Sep 15 12:13:34 1997 Mark Alexander <marka@cygnus.com> - - * mips/crt0.S: Declare external functions as .text to - eliminate linker warnings. - -Tue Sep 9 23:35:04 1997 Gavin Koch <gavin@cygnus.com> - - * mips/Makefile.in (SCRIPTS): Now is configurable. - (BSP): Now is configurable. - (vr4300.o): Remove unnecessary command. - * mips/configure.in: Configure the newly configuable - SCRIPTS and BSP. - * mips/configure: Re-autoconf. - - -Mon Sep 8 16:53:12 1997 Bob Manson <manson@charmed.cygnus.com> - - * mips/Makefile.in (pmon.o): Added compile command that includes - PART_SPECIFIC_DEFINES. Don't include cma101.o by default. - - * mips/configure.in (part_specific_defines): New variable - used when building pmon.o. - (part_specific_obj): Include cma101.o as well as vr4300.o, - since it is board-specific in many ways (and relies on - routines in vr4300.o). - -Mon Sep 8 14:42:44 1997 Gavin Koch <gavin@cygnus.com> - - * mips/idt.ld: Add handling of DWARF sections. - -Sun Sep 7 16:43:05 1997 Gavin Koch <gavin@cygnus.com> - - * mips/crt0.S, mips/idtmon.S, mips/vr4300.S: Handle mips16 builds. - -Thu Sep 4 19:35:12 1997 Andrew Cagney <cagney@b1.cygnus.com> - - * v850/sys/syscall.h: Match with what is in newlib. - -Mon Sep 1 12:43:50 1997 Andrew Cagney <cagney@b1.cygnus.com> - - * v850/sys/syscall.h: New file. - -Thu Aug 28 17:27:16 1997 Stan Shebs <shebs@andros.cygnus.com> - - * rs6000/ads.ld: Define ram region. - (__stack): Fix value. - * rs6000/crt0.S: Clear the sbss area as well as bss. - -Tue Aug 26 16:22:36 1997 Ian Lance Taylor <ian@cygnus.com> - - * m68k/bcc.ld: Don't use BLOCK for the section addresses. - Instead, just force . to be aligned when necessary. - * m68k/idp.ld, m68k/mvme135.ld, m68k/mvme162.ld: Likewise. - * m68k/sbc5204.ld, m68k/sbc5206: Likewise. - -Fri Aug 8 14:20:16 1997 Michael Meissner <meissner@cygnus.com> - - * rs6000/Makefile.in (install-{yellowknife,ads}): The linker - scripts are in the source directory, not the object directory. - -Fri Aug 1 12:21:31 1997 Stan Shebs <shebs@andros.cygnus.com> - - * rs6000/ads.ld: New file, linker script for 821/860 ADS board. - * rs6000/yellowknife.ld: New file, linker script for embedded - Yellowknife (CHRP/PPCP) box. - * rs6000/Makefile.in: Add rules for ADS and Yellowknife bits, - remove references to EVM, don't optimize the test program. - * rs6000/crt0.S: Renamed from mvme-crt0.S, is generic. - * rs6000/mvme-stack.S: Removed, unnecessary. - -Tue Jun 3 12:54:59 1997 Bob Manson <manson@charmed.cygnus.com> - - * mips/crt0.S: Added GCRT0 #ifdef for profiling support. - - * mips/Makefile.in (SCRIPTS): Added idtecoff. - (PCRT0): Added. - - * mips/idtecoff.ld: Added. Add crt0.o startup entry. - -Fri Apr 18 15:54:11 1997 Doug Evans <dje@canuck.cygnus.com> - - * m32r/crt0.S: Remove references to .fillinsn. - -Mon Apr 14 16:34:27 1997 Ian Lance Taylor <ian@cygnus.com> - - * testsuite/Makefile.in (INSTALL): Change install.sh to - install-sh. - -Wed Apr 9 15:41:39 1997 Mike Meissner <meissner@cygnus.com> - - * rs6000/configure.in (AC_PROG_CC): copied from configure.in. - * rs6000/configure: Regenerate. - - -Sat Mar 29 12:21:08 1997 Bob Manson <manson@charmed.cygnus.com> - - * sparc/(ex930.ld,ex931.ld,ex934.ld}: Set __end as well - as _end and end. - -Fri Mar 28 23:01:38 1997 Mark Alexander <marka@cygnus.com> - - * mips/lsi.ld: Before setting _gp, use ALIGN(8) instead - of ALIGN(16). Remove ALIGN from _gp computation. - -Mon Mar 17 10:00:29 1997 Gavin Koch <gavin@cygnus.com> - - * mips/idtmon.S: Added magic number for _flush_cache slot. - -Fri Mar 14 14:36:06 1997 J.T. Conklin <jtc@beauty.cygnus.com> - - * m68k/Makefile.in (install): Fix typo. - - * m68k/crt0.S: Changed to use correct loop condition for coldfire. - -Wed Mar 12 16:00:51 1997 Stu Grossman (grossman@critters.cygnus.com) - - * sparc/Makefile.in: Add rules for above. - (701_OBJS): Add salib-701.o, sparclet-stub.o. - [Brought over from Nov 5 change in sparclet branch.] - - * sparc/salib-701.c (flush_i_cache): Implement cache flushing to fix - intermittent problems with gdb stub and breakpoints. Fixes pr 11755. - -Wed Mar 12 15:49:30 1997 J.T. Conklin <jtc@cygnus.com> - - * m68k/sbc5204: Fix GROUP specifier. - * m68k/sbc5206: Likewise. - -Tue Mar 11 13:43:49 1997 J.T. Conklin <jtc@cygnus.com> - - * m68k/Makefile.in (all): Fix typo. - - * m68k/crt0.S: Use cmpl #0,aX instead of cmpw #0,aX as the latter - is an invalid instruction on the coldfire. - -Fri Mar 7 19:42:50 1997 Mark Alexander <marka@cygnus.com> - - * mips/lsi.ld: New file. - * mips/lsipmon.S: New file. - * Makefile.in: Add support for LSI variant of PMON (MiniRISC board). - * pmon.S: Ditto. - -Fri Mar 7 10:29:11 1997 Ian Lance Taylor <ian@cygnus.com> - - * mips/regs.S (pc): Define. - -Thu Mar 6 18:11:57 1997 Bob Manson <manson@charmed.cygnus.com> - - * mips/pmon.S (INDIRECT): For a target that uses the 64-bit - ABI, set up the stack for a 32-bit call before actually calling - PMON. - - * mips/regs.S: K1BASE needs to be a 64-bit value on a machine - with 64-bit pointers. - - * mips/syscalls.c (sbrk): Use size_t instead of unsigned int - when comparing pointers. - -Wed Mar 5 15:44:04 1997 Doug Evans <dje@seba.cygnus.com> - - * m32r/crtsysc.c (_sbrk): Change _end decl to __model__ (__medium__). - * m32r/Makefile.in (m32r-stub.o): Use MULTISRCTOP to find m32r-stub.c. - -Tue Mar 4 07:01:44 1997 J.T. Conklin <jtc@cygnus.com> - - * m68k/crt0.S: Use cmpw #0,aX instead of tstl aX, as the latter is - an invalid addressing mode on the 68000 core. - -Mon Mar 3 16:38:19 1997 Jim Wilson <wilson@cygnus.com> - - * mips/crt0.S: Subtract 24 instead of 8 when computing sp. - -Mon Mar 3 13:35:20 1997 Doug Evans <dje@canuck.cygnus.com> - - * m32r/m32r-lib.c: New file. - * m32r/{eva,eva-stub}.ld: New files. - * m32r/Makefile.in: Build and install them. - Also build and install m32r-stub.o. - -Tue Feb 25 11:59:20 1997 Gavin Koch <gavin@cygnus.com> - - * mips/configure.in (LIB_AC_PROG_CC): copied from configure.in. - * mips/configure.in (AC_PROG_CC): replaced by LIB_AC_PROG_CC - can't do final link until libs in this directory are built. - * mips/configure: regenerated. - -Tue Feb 25 00:31:27 1997 Ian Lance Taylor <ian@cygnus.com> - - * mips/crt0.S: Call hardware_init_hook and software_init_hook via - a register, to avoid relocation overflow if they are zero. - -Mon Feb 24 22:25:49 1997 Gavin Koch <gavin@cygnus.com> - - * mips/Makefile.in (IDTOBJS,PMONOBJS): Part specific modules - can now be configured by part_specific_obj. - * mips/configure.in (part_specific_obj): added. - * mips/configure: regenerate. - -Fri Feb 21 14:29:54 1997 Doug Evans <dje@canuck.cygnus.com> - - * m32r/crtsysc.c (_sbrk): Declare _end with __attribute ((__sym32__)). - -Fri Feb 21 10:10:55 1997 Jim Wilson <wilson@cygnus.com> - - * mips/ddb.ld: Align the location counter before setting _gp, and - before setting edata. Remove ALIGN from _gp computation. - * mips/idt.ld, mips/pmon.ld: Before setting _gp, use ALIGN(8) instead - of ALIGN(16). Remove ALIGN from _gp computation. - -Thu Feb 20 17:30:41 1997 Ian Lance Taylor <ian@cygnus.com> - - * mips/array.ld: Add mips16 sections. - * mips/ddb.ld, mips/idt.ld, mips/pmon.ld: Likewise. - - * mips/crt0.S (zerobss): Use subu, not sub. - -Tue Feb 18 17:25:56 1997 Mark Alexander <marka@cygnus.com> - - * mips/crt0.S: Add .ent lines for all code fragments, so - that objdump --disassemble will display them correctly. - -Fri Feb 14 11:07:20 1997 J.T. Conklin <jtc@cygnus.com> - - * m68k/mvme-stub.c: New file. Common debugger stub used for mvme- - based targets. This should eventually be merged with or replaced - by the m68k stub from gdb. - * m68k/{mvme135-stub.c, mvme162lx-stub.c}: Removed. - * m68k/Makefile.in: Updated for above change. - - * m68k/{mvme135-asm.S, mvme162lx-asm.S}: Removed all whitespace - differences and changed to consistantly use the IMM macro for - immediate constants. It is now possible to compare these two - files without having to filter out insignificant differences. - - * m68k/mvme135-stub.c (set_debug_traps): Renamed from - init_debug_traps to match documentation and other sample debugger - stubs. - - * m68k/sbc5204.ld: New file, linker script for Arnewsh SBC5204. - - * m68k/sbc5206.ld: New file, linker script for Arnewsh SBC5206. - - * m68k/Makefile.in (DBUG_OBJ, DBUG_BSP): New BSP for coldfire - targets running the dbug monitor. - - * m68k/{dbug-exit.S,dbug-inbyte.S,dbug-outbyte.S}: New files. - -Thu Feb 6 13:31:06 1997 Bob Manson <manson@charmed.cygnus.com> - - * m68k/crt0.S: Don't use SYM to refer to symbols defined - in the linker script. - -Thu Jan 16 10:34:36 1997 Jim Wilson <wilson@cygnus.com> - - * mips/{ddb.ld,idt.ld,pmon.ld}: Readd OUTPUT_FORMAT definition. - -Wed Jan 8 14:49:26 1997 Jim Wilson <wilson@cygnus.com> - - * mips/crt0.S (_start): Don't try to use FPU registers if - __mips_soft_float is defined. - -Fri Dec 27 15:41:08 1996 Bob Manson <manson@charmed.cygnus.com> - - * sparc/Makefile.in (splet-install): Add tsc701.ld. - -Thu Dec 26 14:59:34 1996 Michael Snyder <msnyder@cleaver.cygnus.com> - - * sparc/sparclet-stub.c: Add support for "P" protocol command. - Add support for %cc coprocessor registers, %asr registers. - Work-around broken SAVE instruction on sparclet. - -Tue Dec 24 22:15:53 1996 Angela Marie Thomas (angela@cygnus.com) - - * mips/pmon.S: add an INDIRECT for _flush_cache to be the - same as mon_flush_cache. This fixes failures in "make check" - -Mon Dec 23 18:08:05 1996 Jim Wilson <wilson@cygnus.com> - - * mips/syscalls.c (__errno, _raise): Delete. - -Wed Dec 18 17:29:28 1996 Ian Lance Taylor <ian@cygnus.com> - - * mips/idt.ld: Align the location counter before setting _gp, and - before setting edata. - * mips/pmon.ld: Likewise. - -Sat Dec 14 21:52:40 1996 Ian Lance Taylor <ian@cygnus.com> - - * configure.in: Use a special version of AC_PROG_CC. Autoconf - 2.12 introduced a check for whether the compiler works, and that - check will fail for a cross compilers without a complete set of - libraries. - -Fri Dec 13 10:40:14 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * sbrk.c: Set the heap pointer to the address of _end, not the - value. - -Wed Dec 11 15:26:50 1996 Jim Wilson <wilson@cygnus.com> - - * mips/{ddb.ld,idt.ld,pmon.ld}: Delete OUTPUT_FORMAT definition. - -Fri Dec 6 15:52:36 1996 Jim Wilson <wilson@cygnus.com> - - * mips/crt0.S: Delete unreachable instruction after exit call. - Move exit call before .end _start. - -Tue Nov 26 15:05:26 1996 Doug Evans <dje@rtl.cygnus.com> - - * configure: Regenerate with autoconf 2.12. - -Mon Nov 11 15:12:08 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * config/ppc.mh: New PowerPC eabi target specific config file. - Always use -mrelocatable-lib -mno-eabi. - - * rs6000/configure.in (host_makefile_frag): Use config/ppc.mh. - * rs6000/configure: Regenerate. - - * rs6000/{mvme,sim}-crt0.o (_start): Make initial stack frame 64 - bytes, not 56 so that it is aligned to a 16 byte boundary. - -Tue Nov 5 10:24:29 1996 Doug Evans <dje@canuck.cygnus.com> - - * sparc/Makefile.in (crt0-701.o): Use default rule to build. - * sparc/crt0-701.S: Second pass at little endian support. - -Tue Nov 5 10:08:40 1996 Dawn Perchik <dawn@critters.cygnus.com> - - * sparc/{salib-701.c,sparclet-stub.c,tsc701.ld}: New files. - * sparc/Makefile.in: Add rules for above. - (701_OBJS): Add salib-701.o, sparclet-stub.o. - -Fri Nov 1 21:50:12 1996 Angela Marie Thomas (angela@cygnus.com) - - * mips/ddb.ld: rename cairo.ld to ddb.ld - * mips/Makefile.in: rename cairo to ddb - -Thu Oct 31 13:54:58 1996 Stan Shebs <shebs@andros.cygnus.com> - - * sh/sh1lcevb.ld, sh/sh2lcevb.ld, sh/sh3lcevb.ld: New files, - linker scripts for Hitachi eval boards. - -Thu Oct 31 12:39:53 1996 Doug Evans <dje@seba.cygnus.com> - - * m32r/crt0.S: Set up fp. Speed up zeroing of bss. - -Sun Oct 27 20:34:27 1996 Mark Alexander <marka@cygnus.com> - - * mips/crt0.S: Initialize gp register correctly. - -Tue Oct 22 12:02:19 1996 Doug Evans <dje@canuck.cygnus.com> - - * m32r/sys/syscall.h: New file. - * m32r/crt0.S: Rewrite. - * m32r/crtsysc.c (__trap): Adjust literal and comment syntax. - -Thu Oct 17 13:47:54 1996 Doug Evans <dje@canuck.cygnus.com> - - * m32r/syscalls.c: Deleted, renamed to - * m32r/crtsysc.c: this. - * m32r/Makefile.in: Updated. - -Mon Sep 30 11:42:08 1996 Doug Evans <dje@canuck.cygnus.com> - - * m32r/{Makefile.in,configure.in,configure}: New files. - * m32r/{crt0.S,syscalls.c,trap.S}: New files. - * configure.in: Recognize m32r-*-*. - * configure: Regenerated. - -Thu Sep 26 10:59:25 1996 James G. Smith <jsmith@cygnus.co.uk> - - * mips/crt0.S (_exit): Update terminating break instruction to use - an explicit high value. - -Mon Sep 23 19:02:32 1996 Stan Shebs <shebs@andros.cygnus.com> - - * sh: New directory, Hitachi SH libgloss support. - * sh/sh3bb.ld: New file, SH3 big box linker script. - -Thu Sep 19 12:02:23 1996 Ian Lance Taylor <ian@cygnus.com> - - * mips/crt0.S (zerobss): Use bltu in zerobss loop, not bne, in - case the end symbol is not aligned. - -Sun Sep 15 12:23:47 1996 James G. Smith <jsmith@cygnus.co.uk> - - * mips/vr4300.S (__cpu_flush): Fix lui constant. - * mips/crt0.S (init): Fix passing of arg0 through exit() and - _exit(). - * mips/syscalls.c (__errno): Return address of errno, rather than - NULL. - -Wed Sep 11 10:45:13 1996 Stu Grossman (grossman@critters.cygnus.com) - - * m68k/bcc.ls, m68k/idp.ld, m68k/mvme135.ld, m68k/mvme162.ld: - Merge .init and .fini sections into .text to fix a.out. - -Sun Sep 8 09:50:08 1996 Stu Grossman (grossman@critters.cygnus.com) - - * m68k/bcc.ls, m68k/idp.ld, m68k/mvme135.ld, m68k/mvme162.ld: - Many fixes for problems discovered during testing. Make stack end - at end of ram. Force __CTOR_LIST__ and __DTOR_LIST__ to be - longword aligned. Move .shdata out of .text section. Put .rodata - and .gcc_except_table into .text section. Get rid of .shbss - section, load it into .bss. Remove bogus start address - calculation for .bss. Force all sections to be longword aligned. - Create .init and .fini sections (including function prologues and - epilogues) for ELF support. - * cpu32bug.S cpu32bug.h: Move defs for cpu32bug monitor into - cpu32bug.h. Make sure that cpu32bug function codes aren't global. - Remove creation of vbr_table. Fix function prologue in _exit. - Use fp instead of a6. Add .text pseudo-op to the beginning of - each function. - * crt0.S: Remove global symbols zeroboss, init and launch. Make - main, exit, hardware_init_hook, software_init_hook, atexit and - __do_global_dtors extern, not global. Fix logic error when - initializing stack pointer. It now loads sp if __stack is non- - zero. Reverse order of software and hardware init hooks. - Hardware now comes first. Add call to __INIT_SECTION__, and - register __FINI_SECTION__ with atexit. This is needed to make ELF - static constructors and destructors work right. - -Tue Sep 3 11:55:01 1996 Ian Lance Taylor <ian@cygnus.com> - - * m68k/bcc.ld: Set address of .stab and .stabstr to 0, not `.'. - * m68k/idp.ld, m68k/mvme135.ld, m68k/mvme162.ld: Likewise. - * hp74x/hppa.c, rs6000/evm.ld, sparc/ex930.ld: Likewise. - * sparc/ex931.ld, sparc/ex934.ld, sparc/sim.ld: Likewise. - -Fri Aug 30 15:57:37 1996 James G. Smith <jsmith@cygnus.co.uk> - - * mips/Makefile.in (SCRIPTS): Add cairo. - (vr4300.o:): Force build with target CFLAGS to ensure correct - multilib endianness. The -Tcairo.ld target uses libpmon.a aswell - as the -Tpmon.ld target. - * mips/{idt.ld,pmon.ld}: Remove explicit crt0.o include. - * mips/cairo.ld: Added. - * mips/crt0.S: Restore atexit() call. Fix startup stack - initialisation. - * mips/pmon.S: Fix monitor indirection to be 64bit clean. - * mips/vr4300.s: Added simple bus error handler to cope with - sizing memory that doesn't ghost, but does abort. - * mips/cma101.c: Improve the memory sizer. - * mips/regs.S: Add definitions for SR_KX, SR_SX and SR_UX. - -Thu Aug 29 17:07:45 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * a29k/configure.in (i[345]86-*-*): Recognize i686 for pentium - pro. - * testsuite/libgloss.all/configure.in (i[345]86-*-*): Ditto. - * a29k/configure: Regenerate. - -Thu Aug 22 10:31:38 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/Makefile.in (install{,-linux,-solaris}): Add install of - Linux, Solaris libraries if built. - -Fri Aug 16 10:12:48 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * m68k/Makefile.in: Add -nostdlib to the test targets. - * m68k/{idp,bcc,mvme135,mvme162}.ld: Move the CTORS and DTORS from - .data to .text where they really belong. - * m68k/crt0.S(launch): Don't put __do_global_dtors into atexit, - GCC is supposed to do this in __main. - -Mon Aug 5 15:04:34 1996 Doug Evans <dje@canuck.cygnus.com> - - * sparc/libsys/isatty.c: New file. - -Sun Aug 4 22:32:14 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * pa/Makefile.in: Build the test case as seperate targets. - * pa/{w89k,op50n}.ld: Use GROUP rather than INPUT to get all the - libraries. - -Fri Aug 2 18:25:07 1996 J.T. Conklin <jtc@rtl.cygnus.com> - - * m68k/Makefile.in: Install common crt0.o, remove old references - to per-bsp crt0's. - -Tue Jul 30 21:48:05 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * sparc/Makefile.in: Built crt0.S, not crto.s. - * sparc/crt0.S: Don't use REGS macro, use % always. - * sparc/salib.c: Add a prototype for putDebugChar. - -Tue Jul 23 15:12:42 1996 Doug Evans <dje@canuck.cygnus.com> - - * sparc/{sysc-701.c,crt0-701.S}: New files. - * sparc/Makefile.in (all): Build them. - ($(701_BSP),crt0-701.o): New targets. - ($(CRT0),$(SIM_CRT0),dtor.o): Don't use $<, for sunos make. - (all): Depend on $($(CPU)_ALL). - (install): Use $(INSTALL_DATA), not $(INSTALL_PROGRAM). - Depend on $($(CPU)_INSTALL). - * sparc/configure.in (libgloss_topdir): Delete unnecessary $(srcdir). - (AC_CONFIG_AUX_DIR): Call. - (CPU): Define. - * sparc/configure: Regenerated. - -Mon Jul 22 14:32:39 1996 Doug Evans <dje@canuck.cygnus.com> - - * config/{default.mt,mips.mt}: Don't use $<, for sunos make. - -Mon Jul 22 15:54:02 1996 Ian Lance Taylor <ian@cygnus.com> - - * m68k/crt0.S (zerobss): Don't use dbra if __mcf5200__. - -Sun Jul 14 16:47:14 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * lseek.c (lseek): Don't use SET_ERRNO. - * open.c (open): Ditto. - -Wed Jul 3 18:19:10 1996 Stu Grossman (grossman@critters.cygnus.com) - - * sparc/Makefile.in: Install ex930/931/934.ld files. - * sparc/configure, sparc/configure.in: Use AC_CANONICAL_SYSTEM to - define target_alias to make install work from this directory. - -Wed Jul 3 18:04:49 1996 Ian Lance Taylor <ian@cygnus.com> - - * Makefile.in: Make sure we always have an argument to for. Make - sure rootpre and srcrootpre are always set before using - FLAGS_TO_PASS. - -Tue Jul 2 18:04:31 1996 J.T. Conklin <jtc@hippo.cygnus.com> - - * glue.h (SET_ERRNO): Removed. - * sbrk.c, stat.c, unlink.c: Don't use SET_ERRNO. - -Mon Jul 1 14:24:51 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/Makefile.in: Add $(srcdir)/.. dependencies for all files - in the toplevel. - -Sat Jun 29 23:26:39 1996 James G. Smith <jsmith@cygnus.co.uk> - - * mips/cma101.c (DOSYNC): Explicitly select -mips2 for the - assembly of the "sync" instruction. - * mips/Makefile.in: Removed special cma101.o build. Seperate - install.sh invocations for the BSP libraries. - -Sat Jun 29 08:17:52 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * doc/porting.texi (GNU remote protocol): Fix bad texinfo. - -Fri Jun 28 23:16:37 1996 Rob Savoye <rob@chinadoll> - - * sparc/traps.S: Don't use REGS macro, use % always. - * sparc/Makefile.in: Add -nostdlib when building the test cases, - as gcc keeps thinks it wants two crt0.o. - * sparc/asm.h: Don't define the REGS macro, we'll use explicit - register prefixes. Always define USER_LABEL_PREFIX cause gcc is - broken, and I doubt it'll get fixed. - -Sat Jun 29 05:05:15 1996 James G. Smith <jsmith@cygnus.co.uk> - - * mips/crt0.S (zerobss): Fix the stack-pointer calculation. - -Thu Jun 27 17:23:33 1996 Ian Lance Taylor <ian@cygnus.com> - - * mips/Makefile.in (vr4300.o): Pass -mips3 after $(ASFLAGS). - (cma101.o): Pass -mips2 after $(CFLAGS). - -Tue Jun 25 22:48:15 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) - - * Makefile.in (bindir, libdir): Use autoconf-set values. - * configure: Rebuilt. - - * doc/Makefile.in (mandir, infodir): Use autoconf-set values. - * doc/configure.in (AC_PREREQ): autoconf 2.5 or higher. - * doc/configure: Rebuilt. - - * {a29k,hp74x,i960,m68k,mips,pa,rs6000,sparc,sparc/libsys}/Makefile.in - (bindir, libdir): Use autoconf-set values. - * {a29k,hp74x,i960,m68k,mips,pa,rs6000,sparc,sparc/libsys}/configure.in - (AC_PREREQ): autoconf 2.5 or higher. - * {a29k,hp74x,i960,m68k,mips,pa,rs6000,sparc,sparc/libsys}/configure: - Rebuilt. - -Mon Jun 24 22:01:11 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * sparc/crt0.S: Set the stack to the upper part of memory. Execute - hardware_init_hook and software_init_hook if they exist with a - legit address. Drop into exit after main. Zero the bss section. - * sparc/ex930.ld: PROVIDE hardware_init_hook and - software_init_hook. - -Mon Jun 24 19:44:45 1996 Ian Lance Taylor <ian@cygnus.com> - - * mips/Makefile.in (cma101.o): Use -mips2 option when compiling. - -Wed Jun 19 13:57:36 1996 Rob Savoye <rob@darkstar.cygnus.com> - - * debug.[ch]: New files for GDB stub support. - * config/default.mt: Add rules for debug.o. - * config/default.mh: Add rule for building C++ source. Add $srcdir - to INCLUDES so shared header files can be found. - - * sparc/salib.c(exceptionHandler): Range check the vector number - so we get a legit %tbr value. Add wrappers so inbyte and outbyte - work. - * sparc/crt0.s: Handle cpus that don't have FP support. - * sparc/Makefile.in: Add multilib support. Add variable for - objcopy and objdump. Build the BSPs as archive libraries, not - object files. Add support for the SIS sparc simulator. Build the - test case srecords and dissasembly as seperate makefile - targets. Also optionally build the C++ test case. Use a target - makefile fragment. - * sparc/configure.in: Add multilib support. - * sparc/configure: Regenerated. - * sparc/asm.h: Macros to deal with aout and coff formats portably. - * sparc/slite.h: Sparclite specific stuff. - * sparc/{sim-crt0.S,sim-stub.c,sim-io.c,sim.ld}: New support for - the SIS sparc simulator. - * sparc/traps.S: Generic trap handlers for SIS and ex93x targets. - * sparc/tests.c: Test case for linking and GDB protocol. - -Tue Jun 18 20:06:16 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * pa/Makefile.in: Build the test case srecords and dissasembly - as seperate makefile targets. Also optionally build the C++ test - case. - * pa/crt0.S: If __stack and __globals have a legit address, use - that for %sp and %gp. Execute hardware_init_hook and - software_init_hook if they exist with a legit address. Add - __do_global_dtors() to the atexit array. - * pa/{w89k,op50n}.ld: Use GROUP rather than INPUT to get the - libraries. Allocate the stack and global spaces from the top of - memory. PROVIDE hardware_init_hook and software_init_hook. - - * m68k/Makefile.in: Build the test case srecords and dissasembly - as seperate makefile targets. Also optionally build the C++ test - case. - * m68k/asm.h: Don't define __USER_LABEL_PREFIX__ and - __REGISTER_PREFIX__ ourselves since suprisingly gcc sets them - correctly for a change. - * m68k/{bcc,mvme135,mvme162,idp}.ld: Use the same crt0 rather than - building seperate ones. PROVIDE hardware_init_hook and - software_init_hook. Stick the Constructors and Destructors in - .data cause they don't work in .text (which is where they should - really be). - * m68k/cpu32bug: Add a few more traps to support the older ABug - monitor. - * m68k/crt0.S: If __stack is isn't set, set the stack to the top - of memory. Excecute hardware_init_hook and software_init_hook if - they exist with a legit address. Add __do_global_dtors() to the - atexit array. - - * rs6000/Makefile.in: Use the linker script to build the test - case. Also build a C++ test case. - * rs6000/dtor.C: Test contructors and destructors. - * rs6000/{sim,mvme}.ld: New linkers scripts for the simulator and - the mvme board. - * rs6000/evm.ld: Provide hardware_init_hook and software_init_hook - so we can test for them in the crt0.S. - * rs6000/crto.S: Excecute hardware_init_hook and - software_init_hook if they exist with a legit address. - -Mon Jun 17 18:39:17 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * mips/Makefile.in: Replace the "test" target with seperate - targets for the dissasembled file, and the srecord. - * mips/configure.in: Use a target makefile fragment. - * mips/configure: Regenerate. - * mips/idt.ld: Add a comment on producing srecords. Setup a space - for the stack. PROVIDE hardware_init_hook and software_init_hook. - * mips/crt0.S: Make a small stack. Run memsize() using the temp - stack, and then set the stack to the top of memory. Also grab some - space for the globals. Add __do_global_dtors() to the atexit - array. Call _exit from newlib so the atexit array gets run, then - exits. - -Thu Jun 13 15:44:46 1996 Ian Lance Taylor <ian@cygnus.com> - - * mips/Makefile.in (vr4300.o): Use -mips3 option when assembling. - -Sat Jun 1 16:27:53 1996 Michael Meissner <meissner@wogglebug.tiac.net> - - * rs6000/simulator.S (open, close, lseek): Add system calls. - * rs6000/Makefile.in (OBJS): Don't put open.o, close.o, lseek.o - here. - (SIM_OBJS): Put them here instead. - -Tue Apr 30 20:01:08 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * m68k/crt0.S: Don't allocate __stack in the .bss section. - * m68k/{idp,mvme135,mvme162,bcc}.ld: Set __stack to a word below - the top of memory. Use "-l" in GROUP rather than the full name so - it'll get found using the path lookup in LD. Also link in libgcc - too. Don't set __lstack anymore. - * m68k/Makefile.in: Build test as a series of Makefile targets, - rather than as a big loop. - -Thu Apr 25 08:38:15 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/mvme-stack.S: New file, define __stack. - * rs6000/mvme-crt0.S (_start): If __stack is not 0, use that for - the stack address. - -Thu Apr 25 06:42:02 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * rs6000/Makefile.in: Add support for multilib. - * rs6000/configure.in: Ditto. - * rs6000/configure: Regenerate. - -Wed Apr 24 11:02:33 1996 Doug Evans <dje@blues.cygnus.com> - - * sparc/libsys/Makefile.in (isatty.o): Add rule for SunOS VPATH. - -Fri Apr 19 13:23:31 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * {mips,a29k,pa}/configure.in: Add support for multilibs - by using config-ml.in. - * {mips,a29k,pa}/configure: Regenerate. - * {mips,a29k,pa}/Makefile.in: Build archive libraries, - not objects for the BSPs. - -Fri Apr 19 12:33:25 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/sol-crt0.c: Delete, file moved into gcc directory. - -Mon Apr 15 14:09:26 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/simulator.S: Call _cerror to save errno if an error - occurred. - * rs6000/sim-errno.c (_cerrno): New function to set errno. - -Thu Apr 11 14:19:01 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/sol-{crt0.c,syscall.S,cfuncs.c}: New files to support - libgloss on PowerPC Solaris. - - * rs6000/Makefile.in: Add Solaris support. - -Tue Apr 16 17:43:06 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * Makefile.in: Don't do anything if SUBDIRS is empty. - -Mon Apr 15 15:37:52 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * configure.in, m68k/configure.in: Add support for multilibs by - using config-ml.in. - * m68k/crt0.S: If a value for __stack hasn't been specified, - initialize %sp to some memory in .bss. - * m68k/Makefile.in: Build archive libraries, not objects for the - BSPs. Build multiple copies of the crt0.o, one for each target. Add - support to build multilibs. - * idp.ld, bcc.ld, mvme135.ld, mvme162.ld: Use GROUP to look for - libc.a and the BSP rather than INPUT an object. Get the right - crt0.o. - -Tue Apr 9 23:31:53 1996 Ian Lance Taylor <ian@cygnus.com> - - * m68k/cpu32bug.S (getDebugChar): Use extw/extl rather than - extbl, so it can be used on a 68000. - -Wed Mar 27 17:18:01 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/{mvme-exit,simulator}.S (_exit): Loop on a trap - instruction following the _exit system call. This also makes sure - that the debugger reports the address as being in _exit, rather - than whatever function follows _exit. - -Fri Mar 15 12:30:02 1996 J.T. Conklin <jtc@rtl.cygnus.com> - - * i960/{Makefile.in,asm.h,configure,configure.in,mon-read.c, - mon-syscalls.S,mon-write.c}: Initial support for MON960. - * configure.in: Add support for i960. - * configure: Rebuild with autoconf 2.8. - -Fri Mar 8 18:12:52 1996 Ian Lance Taylor <ian@cygnus.com> - - * a29k/configure.in: Call AC_CONFIG_AUX_DIR. - * a29k/configure: Rebuild with autoconf 2.7. - * m68k/configure.in: Call AC_CONFIG_AUX_DIR before - AC_CANONICAL_SYSTEM. - * mips/configure.in, pa/configure.in: Likewise. - * rs6000/configure.in: Likewise. - * m68k/configure, mips/configure, pa/configure: Rebuild. - * rs6000/configure: Rebuild. - -Fri Mar 8 08:11:14 1996 Doug Evans <dje@charmed.cygnus.com> - - * sparc/libsys/sbrk.S (curbrk): Moved from here, - * sparc/libsys/cerror.S (curbrk): To here. - -Thu Mar 7 11:39:09 1996 James G. Smith <jsmith@cygnus.co.uk> - - * mips/crt0.S (bssloop): Updated comment to reflect the source. - -Wed Mar 6 18:12:25 1996 Doug Evans <dje@charmed.cygnus.com> - - * configure.in (sparclet-*-aout*): Add entry. - * configure: Regenerated. - * sparc/libsys/{Makefile.in,configure.in,configure,isatty.c, - libsys-crt0.S,sbrk.S,syscall.h,syscallasm.h,template.S,template_r.S}: - New files. - -Fri Feb 23 22:21:07 1996 Rob Savoye <rob@chinadoll.cygnus.com> - - * a29k: New dir for a29k-coff support for the AMSAT Phase-3D - satellite. (doesn't use udi) - * a29k/{29200-io.c,Makefile.in,configure,configure.in,README,crt0.s, - p3dgps.ld,sa29200.ld,sa29200b.ld,test.c: New files for a29k - support. - * a29k/sys/{cpudef.h,intrinsi.h,macros.h,romdcl.h,sysmac.h, - fpsymbol.h,libconfig.h,proreg.h,smartmac.h}: New files for a29k - support. - * configure.in: Add support for a29k. - * configure: Rebuild. - -Thu Feb 22 13:32:28 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/mvme-read.c (read): New file, if large read, do a .INLN - system call, instead of sucessive .INCHR system calls. Map \r on - input to \n. - - * rs6000/mvme-inbyte.S: Add stub for new input system calls. - - * rs6000/Makefile.in (MVME_OBJS): Add mvme-read.o, delete read.o - -Wed Feb 21 16:45:19 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/mvme-print.c: New file, map write into sequences of - .OUTLN/.OUTCHR/.PCRLF rather than just using .OUTCHR. - - * rs6000/mvme-outbyte.S: Add stubs for new output system calls. - - * rs6000/Makefile.in (MVME_OBJS): Add mvme-print.o, delete print.o - and write.o. - -Thu Feb 15 11:37:02 1996 James G. Smith <jsmith@cygnus.co.uk> - - * mips/{mipsidt,mipspmon}.ld: Added OUTPUT_ARCH definition. - * mips/cma101.c (time): Added time() function. - -Tue Feb 13 10:36:07 1996 James G. Smith <jsmith@cygnus.co.uk> - - * mips/vr4300.S (__cpu_flush): Fix loop counter. - -Tue Jan 30 15:41:19 1996 James G. Smith <jsmith@cygnus.co.uk> - - * mips/syscalls.c: Used include file, rather than local manifest - definitions. - * mips/crt0.S: Removed IDT monitor entry points. - * mips/Makefile.in: Construct mipsidt and mipspmon BSP files. - * mips/{cma101.c,idtmon.S,pmon.S,regs.S,vr4300.S}: Added. - * mips/{mipspmon.ld}: Added. - -Sun Jan 28 08:01:31 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/configure.in (AC_INIT): Use sim-crt0.S, not crt0.s. - * rs6000/configure: Regenerate. - -Wed Jan 24 14:26:01 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/{mvme,sim}-crt0.S (__atexit): Put the __atexit variable - in the .sdata section, and provide a fixup for the address, in - order to support the new -msdata compiler flag. - -Thu Jan 11 11:24:25 1996 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/{mvme,sim}-crt0.S (__atexit): Provide address of atexit, - so eabi-ctors in libgcc.a can know to register the function to - call all of the destructors. - -Sat Dec 30 14:31:37 1995 Doug Evans <dje@canuck.cygnus.com> - - * configure.in (AC_CONFIG_AUX_DIR): Adjust to new build tree layout. - * {doc,hp74x,m68k,mips,pa,rs6000,sparc}/configure.in - (AC_CONFIG_AUX_DIR): Define - * {,doc,hp74x,m68k,mips,pa,rs6000,sparc}/configure: Regenerated. - -Mon Dec 11 12:20:24 1995 Ian Lance Taylor <ian@cygnus.com> - - * Makefile.in (FLAGS_TO_PASS): Add INSTALL, INSTALL_PROGRAM, - and INSTALL_DATA. - -Fri Dec 1 16:54:15 1995 James G. Smith <jsmith@cygnus.co.uk> - - * mips/syscalls.c (sbrk): Fixed memory addressing. System call - returns size, not (last address + 1). - -Thu Nov 16 13:47:57 1995 Ian Lance Taylor <ian@cygnus.com> - - * config/default.mh: Don't define CC_FOR_TARGET, AS_FOR_TARGET, - AR_FOR_TARGET, LD_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET, - OBJDUMP_FOR_TARGET, or OBJCOPY_FOR_TARGET. Change the build rules - to use CC, etc., instead of CC_FOR_TARGET, etc. - * configure.in, */configure.in: Get values for CC, AS, AR, LD, and - RANLIB. Always use default.mh. - * Makefile.in (FLAGS_TO_PASS): Pass down LD. - * Makefile.in, */Makefile.in: Let CC, AS, AR, LD, and RANLIB by - substituted by the autoconf configure script. Use them instead of - the *_FOR_TARGET variants. - * hp74x/configure.in: Don't call AC_CANONICAL_SYSTEM. - * m68k/configure.in: Call AC_ARG_PROGRAM. - * mips/configure.in, pa/configure.in: Likewise. - * rs6000/configure.in: Likewise. - * m68k/Makefile.in: Set program_transform_name, OBJDUMP, and - OBJCOPY. - * mips/Makefile.in, pa/Makefile.in, rs6000/Makefile.in: Likewise. - * mips/Makefile.in: Split new test target from all target. - * configure, */configure: Rebuild. - -Tue Nov 14 12:04:36 1995 Angela Marie Thomas (angela@cygnus.com) - - * Makefile.in: Added prefix, exec-prefix and tooldir to - FLAGS_TO_PASS so vaulting works correctly. - -Tue Nov 14 18:32:41 1995 James G. Smith <jsmith@cygnus.co.uk> - - * mips/mipsidt.ld: Added. - * mips/syscalls.c: Added. - * mips/crt0.S: Added FPU presence check, and entry points into IDT - monitor. - * mips/Makefile.in (all): Updated to build generic IDT monitor - crt0.o file. - * mips/test.c (main): Removed unnecessary prototypes. - * configure.in (configdirs): Removed mips64vr4300 target. - * configure: Re-generated. - * config/default.mh (OBJDUMP_FOR_TARGET): Added missing parent - directory path element. - * mipsidt: Directory removed. - -Fri Nov 10 12:50:03 1995 Ian Lance Taylor <ian@cygnus.com> - - * configure.in, */configure.in: Don't call AC_ARG_PROGRAM. - * configure, */configure: Rebuild. - * Makefile.in, */Makefile.in: Don't set program_transform_name. - -Wed Nov 8 16:19:31 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk> - - * configure.in (configdirs): Add mips*vr4300*-*-* target. - - * configure: Re-generated. - - * mipsidt/crt0.S: Check for FPU presence. - - * mipsidt/mipsidt.ld: Removed explicit crt0.o from link. - - * mipsidt/Makefile.in: Explicitly link against crt0.o file. - -Thu Nov 2 23:27:28 1995 Rob Savoye <rob@chinadoll.cygnus.com> - - * config/default.mh: Add additional "../" to path used to find - comp-tools binaries in an object tree. - -Mon Oct 30 18:10:47 1995 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/mvme-crt0.S (_start): Zero out bss before the the program - starts. - -Tue Oct 24 10:07:50 1995 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/mvme-{exit,outbyte,inbyte}.S: Use hex for the system - calls, not decimal, since formatting the disk when you intend to - write out a character is not nice. - -Mon Oct 23 22:17:12 1995 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/mvme-crt0.S (_start): Bump sp by -4 before storing end of - stack chain to avoid last word indebugger's memory. - - * rs6000/mvme-{exit,inbyte,outbyte}.S: System call number goes in - r10, not r0. - -Mon Oct 23 17:57:23 1995 James G. Smith <jsmith@jaalfrezi.cygnus.co.uk> - - * mipsidt/Makefile.in: Removed the LDFLAGS_FOR_TARGET in the test - program link. - - * mipsidt/crt0.S: Changed monitor entry sequence. - - * mipsidt/syscalls.c: Added local sbrk() function, derived from - (libgloss/sbrk.c), but using the monitor routine to ascertain the - amount of memory available. - -Mon Oct 23 11:58:04 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk> - - * mipsidt: Added (directory). This is a simple crt0 module for the - IDT MIPS monitor. The existing "libgloss/mips" directory is for a - specific R3000 board, so it was safer creating a new target - directory. - * mipsidt/Makefile.in: Added. - * mipsidt/configure: Added. - * mipsidt/configure.in: Added. - * mipsidt/crt0.S: Added. - - * mipsidt/syscalls.c: Added. - * mipsidt/test.c: Added. - - * configure (mips*vr4300*-*-*): Use new mipsidt target directory. - -Mon Oct 9 21:07:08 1995 Michael Meissner <meissner@cygnus.com> - - * rs6000/Makefile (all asm rules): Remove asm.h dependency. - * rs6000/asm.h: File deleted, moved to gcc directory as ppc-asm.h. - * rs6000/mvme-{crt0,exit,inbyte,outbyte}.S: Include ppc-asm.h, not - asm.h. - * rs6000/sim{-crt0,ulator}.S: Ditto. - - * rs6000/{mvme,sim}-crt0.S (_start): Don't use FUNC_START/FUNC_END - for _start, since the linker needs to see this. - -Mon Oct 9 12:08:12 1995 Stu Grossman (grossman@cygnus.com) - - * sparc/sparc-stub.c: include sparclite.h to get access to register - fondling macros. - * (trap_low): Save and restore FP regs if necessary. Also, clean - up save and restore of debug unit regs. - * (hard_trap_info): Add more architecturally defined traps. - * (set_debug_traps): Only set FP disabled trap if FP is disabled. - * (get_in_break_mode): Clean up. Get rid of calls to - set_hw_breakpoint_trap(). Also, use write_asi macro - * (handle_exception): Clean up `g' and `G' commands. Add `P' - command. - * (hw_breakpoint): Why was this here!? It's gone now... - * sparc/crt0.s: Speed up prom copy loop. Clean up window over/under - flow setup. Call main instead of jumping to it. - * sparc/salib.c (get_uart_status rcv_char flush_i_cache): Use new - and improved read_asi macro. - * (win_ovf win_unf): Parameterize window size. - * sparclite.h (read_asi): Rewrite so that macro returns an rval. - * (read_psr write_psr): New macros to do the obvious. - * Add conditionalized code for 933 window size. - -Fri Oct 6 15:35:01 1995 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/simulator.S (abort): Delete abort. - * rs6000/sim-abort.c: New file, to print message that abort was - called. - * rs6000/Makefile.in (SIM_OBJS): Add sim-abort.o. - - * rs6000/asm.h (FUNC_NAME, FUNC_START, FUNC_END): New macros that - give the start and end of a function written in assembler. If - -mcall-aixdesc or -mcall-nt, create a function descriptor and name - the real function with one or two leading periods. - - * rs6000/{simulator,sim-crt0}.S: Use new function macros. - * rs6000/mvme-{crt0,exit,inbyte,outbyte}.S: Ditto. - - * rs6000/Makefile.in: Add asm.h as a dependent for all .S files. - Compile the .S files with gcc, so that -mcall-* flags define the - appropriate macros. - -Thu Sep 28 13:49:45 1995 Ian Lance Taylor <ian@cygnus.com> - - * sparc/ex93x.ld: Remove crt0.o from INPUT; gcc will normally pass - crt0.o anyhow. Add leading underscore to __CTOR_LIST__, et. al. - * sparc/salib.c (__main): Comment out empty function. - -Wed Sep 20 14:36:12 1995 Ian Lance Taylor <ian@cygnus.com> - - * Makefile.in (maintainer-clean): New synonym for realclean. - * hp74x/Makefile.in (maintainer-clean): Likewise. - * m68k/Makefile.in (maintainer-clean): Likewise. - * pa/Makefile.in (maintainer-clean): Likewise. - * mips/Makefile.in (maintainer-clean): Likewise. - * rs6000/Makefile.in (maintainer-clean): Likewise. - * sparc/Makefile.in (maintainer-clean): Likewise. - * doc/Makefile.in (maintainer-clean): Likewise. - * testsuite/Makefile.in (maintainer-clean): Likewise. - * testsuite/libgloss.all/Makefile.in (maintainer-clean): Likewise. - -Sat Sep 16 23:04:11 1995 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/Makefile.in (all): Fix typo preventing simulator from - being built. - -Tue Sep 12 10:43:41 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * rs6000/Makefile.in: Misc mvme support fixes. - - * rs6000/{mvme-exit.S, mvme-inbyte.S, mvme-outbyte.S}: Strip - leading underscores from identifiers. - - * m68k/asm.h: New file, macro definitions helpful for assembly - language programming. - * m68k/{cpu32bug.S, crt0.S, mvme.S, mvme135-asm.S, mvme162lx-asm.S}: - Use asm.h. - - * rs6000/{mvme-crt0.S, mvme-exit.S, mvme-inbyte.S, mvme-outbyte.S}: - New files, preliminary support for motorola mvme targets running - the ppcbug monitor. - * rs6000/Makefile.in: Build mvme support. - - * rs6000/asm.h: New file, macro definitions helpful for assembly - language programming. - * rs6000/{sim-crt0.S, simulator.S}: Use asm.h. - -Fri Sep 8 18:51:29 1995 Michael Meissner <meissner@wogglebug.tiac.net> - - * rs6000/sim-sbrk.c (sbrk): Add cast to silence warning. - -Fri Sep 8 13:03:12 1995 Brendan Kehoe <brendan@lisa.cygnus.com> - - * m68k/idp-inbyte.c (READREG): Add volatile to the cast, to avoid - reordered insns that can end up being an infinite loop. - * m68k/idp-outbyte.c (READREG): Likewise. - -Wed Sep 6 10:01:33 1995 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/sim-sbrk.c (sbrk): Use the brk system call, instead of - using a large static area for the break area. - -Thu Aug 24 14:57:28 1995 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/Makefile.in (install*): Add separate installation rules - for sim and evm targets. - -Wed Aug 23 16:49:02 1995 Michael Meissner <meissner@tiktok.cygnus.com> - - * rs6000/sim*: Add PowerPC simulator support. - -Tue Aug 22 11:52:40 1995 Jeff Law (law@snake.cs.utah.edu) - - * pa/hp-milli.s: Add entry/exit pseudo-ops around all exported - code. Fix callinfo directives to include "millicode" attribute. - - * pa/hp-milli.s (divU): Fix bug found by arith-rand1.c testing. - -Mon Aug 21 23:31:42 1995 Jeff Law (law@snake.cs.utah.edu) - - * pa/crt0.S ($START$): Use local label prefix for local label - "bssloop". - -Mon Aug 14 11:57:46 1995 Kung Hsu <kung@mexican.cygnus.com> - - * ex93x/sparclite.h: add __WINSIZE. - * ex93x/salib.c: Use __WINSIZE, implements write with $O command of - stub protocol. - -Thu Aug 3 14:40:12 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * Makefile.in: Updated to reflect filename changes. - - * m68k/mc68681-duart.h: Renamed to m68681reg.h. - * m68k/mc68681-duart.c: Split up and renamed to idp-inbyte.c and - idp-outbyte.c - -Fri Jul 28 11:23:24 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * m68k/mc68681-duart.h: Removed everything except register offsets. - Changed offsets so they reflect actual chip instead of how device - is mapped into the IDP address space. - * m68k/mc68681-duart.c (DUART_ADDR): New macro, base address. - (READREG, WRITEREG): Changed to correspond to unusual way the - device is mapped (ie. base address + (reg offset * 4) + 3)). - (duart_status, duart_mode, duart_init, duart_restore): Removed, - these interfaces were never used and didn't work. - (outbyte): Removed unconditional delay. - - * m68k/crt0.S: Use SYM(_end) instead of end. This completes my - change of April 18th which makes the "_end" symbol compatible - with both a.out and coff toolchains. - (zerobss): Handle zero-length bss. - -Thu Jul 27 15:35:37 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * configure, {doc, hp74x, m68k, mips, pa, sparc}/configure: - regenerated with autoconf 2.4.2. - -Wed Jul 26 13:42:27 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * doc/porting.texi: Fix typos and spelling errors. - -Mon Jun 26 09:23:23 1995 Jeffrey A. Law <law@rtl.cygnus.com> - - * pa/Makefile.in: Enable HP supplied millicode routines. - * pa/hp-milli.s: Make sure copyright notice gets included - in objects files. - - * pa/crt0.S ($START$): Use "%" instead of "'" to avoid losing whe - run through cpp. - -Fri Jun 16 18:40:22 1995 Jeffrey A. Law <law@rtl.cygnus.com> - - * pa/crt0.S ($START$): Use long-calls to call main and exit. - -Tue Jun 13 16:05:13 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * pa/crt0.S: Call exit() after returning from main. - -Tue Jun 13 10:43:14 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * Makefile.in, {doc, hp74x, m68k, mips, pa, sparc}/Makefile.in - (distclean, realclean): Remove autoconf-generated config.cache - and config.log files. - -Mon Jun 5 15:56:22 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * config/{default.mh, dos.mh} (CFLAGS_FOR_TARGET): Added -O2. - (.c.o, .s.o, .S.o, etc.): Don't use @ to hide how the compiler - is invoked, it makes it much more difficult to debug. - -Tue May 30 19:07:59 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * testsuite/libgloss.all/math.c: Add additional tests for modulo. - -Mon May 29 13:03:39 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * stat.c: Add const so it works with newlib's stat.h. - -Thu May 25 16:28:42 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * m68k/mvme.S: Extend sign using two instructions rather than one - so it'll work on a stock mc68000. - -Tue May 23 18:12:19 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * close.c, stat.c, fstat.c, open.c, lseek.c, print.c, putnum.c, - unlink.c read.c, sbrk.c, getpid.x, kill.c: New files that used to - be glue.c. - * {m68k,pa,mips}/Makefile.in: Build using broken up glue.c. - * pa/Makefile.in: Make all just build BSP, add seperate test - target. - * most files: add Cygnus BSD-style copyright message. - -Tue May 23 12:58:03 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * configure.in, {hp74x, m68k, mips, pa, sparc}/configure.in: - Use changequote() to temporarily turn off m4 quoting so that - i[345]86-*-go32 pattern in case statement remains unchanged. - * configure, {hp74x, m68k, mips, pa, sparc}/configure: - regenerated. - -Tue May 23 11:15:52 1995 Angela Marie Thomas <angela@cirdan.cygnus.com> - - * mips/Makefile.in (SCRIPT): added "SCRIPT = array.ld" so installs - work correctly. - -Mon May 22 21:33:49 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * ex93x: renamed to sparc. - * r3000: renamed to mips. - * hppro: renamed to pa. - * configure.in, configure: Use new directory names. - * config/default.mh: Remove '' in sed program_transform_name so - it actually works. - * doc/porting.texi: update doc. - -Wed May 17 17:25:53 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * doc/configure.in: converted to autoconf. - * doc/configure: New file, generated with autoconf 2.3. - - * Makefile.in, config/{ex93x, hp74x, hppro, m68k, - r3000}/Makefile.in (Makefile.in): Added config.status to - dependency list. - (config.status): New target. - - * m68k/Makefile.in: Build M68332BCC BSP. - -Wed May 10 18:43:21 1995 Stu Grossman (grossman@andros.cygnus.com) - - * glue.c: Change decl of end to char[] for some reason. - * (sbrk): Rewrite sbrk so that it works. - * (fstat): Return status indicating fd is for a tty. Makes stdio - work better. - * hppro/crt0.S (_sr4export): Retrieve rp from -24(sp), not - -18(sp). Note that -24 decimal == -18 hex... - * hppro/op50n-io.S: Add read and write interfaces to the rom - monitor. Unfortunately, the monitor doesn't seem to work... - * hppro/op50n.ld: Clean up lots of stuff. Define memory in a - nice way. Define stack and reserve space. Put heap after stack. - -Thu May 4 10:28:01 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * configure.in (AC_PREREQ): Changed to 2.3, since autoconf - versions prior to this generate code that AIX 4.X's sh can't - hack. - - * m68k/Makefile.in (BCC_BSP, BCC_OBJS): New BSP for M68332BCC. - * m68k/cpu32bug.S: New file, support for cpu32bug monitor used by - bcc. - * m68k/bcc.ld: Link with bcc.o - -Fri Apr 21 16:17:17 1995 Torbjorn Granlund <tege@rtl.cygnus.com> - - * hppro/{milli.S,divide.S,divI.S,divU.S,multiply.S,test-div.c, - test-dyncall.c,test-mul.c,remI.S,remU.S,dyncall.S}: Delete. - * hppro/divcnst-generic/*: Delete. - * hppro/divcnst-fast/*: Delete. - * hppro/Makefile.in: Delete junk. - -Tue Apr 18 11:22:47 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * m68k/{bcc.ld idp.ld, mvme135.ld, mvme162lx.ld}: Removed stack - section, moved __stack definition to the top level and set it - explicitly to the value appropriate to the target board. - Added __end symbol (needed for a.out toolchains). - -Mon Apr 17 12:48:48 1995 Stu Grossman (grossman@andros.cygnus.com) - - * hppro/w89k.ld: Move _stack to before `end' and `_end' so that - malloc doesn't trash the stack. - * hppro/w89k-io.c (outbyte): Make this be void, and remove return - value, which is useless anyway. - -Mon Apr 17 06:13:55 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * m68k/bcc.ld: New file, linker script for M68332BCC Business Card - Computer. - * m68k/Makefile.in: Install BCC linker script. - - * Makefile.in: Fixed typo. - - * hppro/configure.in: Changed AC_INIT file from crt0.s to crt0.S. - * hppro/configure: regenerated. - -Mon Apr 17 00:02:15 1995 Stu Grossman (grossman@andros.cygnus.com) - - * hppro/op50n.ld: Define _stack explicitly instead of implicitly - via common. - * hppro/{w89k-io.c w89k.h}: Use pointers to volatile for inp and - outp. Use correct port numbers for COM1 serial port. - -Fri Apr 14 16:56:35 1995 Ken Raeburn <raeburn@cujo.cygnus.com> - - * m68k/mc68ec.c (_exit): Use extended asm construct to get the - proper immediate-operand syntax for whatever the target assembler - configuration is. - * m68k/mvme.S (__IMMEDIATE_PREFIX__, IMM): Copy and use macro - definitions as in m68k/crt0.S. - -Thu Apr 13 16:48:46 1995 Angela Marie Thomas <angela@cirdan.cygnus.com> - - * Makefile.in: fixed clean rules such that they do not try to - clean ${SUBDIRS} if libgloss not supported on that target. - -Thu Apr 13 13:39:46 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * configure.in: Append new subdirectories to ${configdirs}. - (go32-*-*): Removed. - * configure: Regenerated. - - * m68k/mvme162lx.ld: Put __stack in ram, even though it's not - loaded. - - * m68k/Makefile.in: Don't hide how BSP objects are built. - - * glue.c (print, putnum): declared void. - - * {hppro,m68k}/Makefile.in: Use ${CC_FOR_TARGET} to link executables. - (LIBS_FOR_TARGET): Removed. - - * config/{default.mh, dos.mh} (NEWLIB_CFLAGS, NEWLIB_LDFLAGS): New - make variables, expands to compiler flags to find headers and - libraries if ${objroot}/newlib is present. - (CFLAGS_FOR_TARGET): Added ${NEWLIB_CFLAGS}. - (LDFLAGS_FOR_TARGET): Added ${NEWLIB_LDFLAGS}. - (LIBC_FOR_TARGET, LIBM_FOR_TARGET, LIBGCC_FOR_TARGET, - LIBS_FOR_TARGET): Removed. - -Thu Apr 13 11:51:17 1995 Torbjorn Granlund <tege@adder.cygnus.com> - - * m68k/Makefile.in (install): Use correct names for MVME* variables. - * configure.in: Delete `unknown' from m68* case. - -Thu Apr 13 11:47:01 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * m68k/crt0.S: initialize stack pointer to __stack before creating - inital stack frame. - - * m68k/{idp.ld, mvme135.ld, mvme162lx.ld}: Move __stack out of - bss, and into its own segment with an address at top of RAM. - -Wed Apr 12 12:36:28 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * {.,ex93x,hp74x,hppro,m68k,r3000}/{Makefile,configure}.in: - converted to autoconf. - * {.,ex93x,hp74x,hppro,m68k,r3000}/configure: New files, generated - from configure.in with autoconf 2.3. - -Mon Apr 10 22:50:48 1995 J.T. Conklin (jtc@rtl.cygnus.com) - - * m68k/{idp.ld, mvme135.ld, mvme162lx.ld}: Revert last change, - CONSTRUCTING and RELOCATING only work for linker scripts built - from ld/scripttmpl/*. - - * m68k/{idp.ld, mvme135.ld, mvme162lx.ld}: Changed to use - CONSTRUCTING and RELOCATING expressions so that the ctor/dtor - tables and etext, edata, and end variables are only done when - appropriate. - -Fri Apr 7 17:30:35 1995 Stu Grossman (grossman@andros.cygnus.com) - - * config/default.mh: Use $${srcroot} instead of ${SRCROOT} to get - inherited value. - * hppro/crt0.S: Remove static definitions of _stack and $global$. - Let the linker script define them in the BSS segment. - * hppro/w89k.ld: Use MEMORY to define memory regions. Add defs - for $global$ and _stack in the appropriate segments. - -Tue Apr 4 18:27:37 1995 Jason Molenda (phydeaux@cygnus.com) - - * Makefile.in (FLAGS_TO_PASS): pass down MAKEINFO. - -Thu Mar 30 18:10:53 1995 Kung Hsu <kung@mexican.cygnus.com> - - * ex93x/ex93x.ld: Add crt0.o in INPUT. - * ex93x/sparcl-stub.c: Add nop after bg insn. - * ex93x/sparc-stub.c: Add & 0x7f mask to all character input. - -Thu Mar 30 15:22:31 1995 Rob Savoye <rob@rtl.cygnus.com> - - * {hppro,m68k,ex93x,testsuite/libgloss}/configure.in: Add SRCROOT - variable. - * {hppro,m68k,ex93x,testsuite/libgloss}/Makefile.in: Add SRCROOT - variable. - * config/default.mh: Use SRCROOT to find the newlib includes. - -Tue Mar 28 19:54:26 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * configure.in, testsuite/configure.in: Add SRCROOT variable. - * glue.c: Change "char *path" to "const char *path" so it works - with the changes stat.h. - -Fri Mar 24 17:29:08 1995 Kung Hsu <kung@mexican.cygnus.com> - - * ex93x/ex93x.ld: The stubs module now can have different names for - different SPARClite chips. Use default one which is slite930.o. - -Mon Mar 20 15:49:46 1995 J.T. Conklin <jtc@rtl.cygnus.com> - - * m68k/mc68ec.c (_exit): Changed to take integer status argument. - -Fri Mar 17 17:48:42 1995 Kung Hsu <kung@mexican.cygnus.com> - - * config/default.h: add -I. to INCLUDES. - * ex93x/salib.c: to include sparclite.h. - * ex93x/sparclite.h: new file copied from gdb/sparclite. - - * config/default.mh: Fix INCLUDES to one level less '../'. - -Mon Mar 13 17:05:35 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * testsuite/libgloss.all/misc.c: Misc bug reports, mostly - soft-float tests. - -Wed Mar 8 19:00:18 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * m68k/{crt0.S, mvem135.ld, mvme162lx.ld, idp.ld}: Setup the stack - in the linker script. Use a macro to cover using '#' or '&' for - immediate values. - * m68k/{mvme135-asm.S, mvme162lx-asm.S}: Use a macro to cover - using '#' or '&' for immediate values. - * testsuite/libgloss.all/io.c: Add a test for read(). - -Thu Feb 16 21:13:34 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * glue.c: Make use _ansi.h, move to top level libgloss directory - form all other directories. - * Makefile.in: All Makefiles had SCRIPTS and OBJROOT added. - * {m68k,hppro,r3000)/Makefile.in: All build the test the same way - using OBJROOT. - * configure.in: All configure.in now edit the value to OBJROOT in - the Makefiles they produce. - * config/default.mh: Use OBJROOT for paths to test for fresh - binaries. - * configure.in: Add the testsuite directory. - * testsuite/config/{m68k.mt,mips.mt}: New target support for - MVME135, IDP, and Array targets. - -Thu Feb 9 21:45:33 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * testsuite/libgloss.all{varargs.c,varargs2.c}: Test cases for - traditional and ANSI varargs. (which currently fail) - * Makefile.in: Build intelligently and use dependancies so we - don't rebuild the world for each test run. - * configure.in: Make a .gdbinit file to run the tests and load via - gdb. - -Wed Mar 8 22:35:29 1995 Ken Raeburn <raeburn@cujo.cygnus.com> - - * m68k/idp.ld: Omit STARTUP line, since crt0.o is being supplied - by gcc. - -Thu Feb 23 12:08:19 1995 Ken Raeburn <raeburn@cujo.cygnus.com> - - * m68k/crt0.S: Use '&' instead of '#' for immediate operands. - * m68k/mc68ec.c: Ditto, in asm statements. - * m68k/mvme.S: Ditto. - -Wed Feb 1 23:55:39 1995 Angela Marie Thomas <angela@cirdan.cygnus.com> - - * Makefile.in (all): added "else" statements for Ultrix to work - -Fri Jan 27 10:48:20 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * testuite/{config,lib,libgloss.all}: DejaGnu testing support. - * testsuite/config/support.c: A minimal testing API for minimal - targets. - * testsuite/config/hppa.mt: Set build flags for PRO targets. - * libgloss.all/{float.c,memory.c,io.c,double.c,math.c,array.c}: - Test cases for libgloss and soft-float. - - * hppro/{w89k.ld,op50n.ld}: Set .text here now. - -Wed Jan 25 21:16:38 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * testsuite/{config,lib,libgloss.all}: The beginnings of a test - suite for low level stuff. A few test cases now all build. - -Thu Jan 12 13:02:12 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * config/default.mh: Change default path for linking in a freshly - built libc.a, libm.a, libgcc.a to work with -msift-float. - - * hppro/Makefile.in: Set MULTILIB so the -msoft-float safe - libraries get used. - - * m68k/Makefile.in: Use explicit rules, rather than redefining - .c.o. This is to force compiling with -m68000. - -Mon Jan 9 15:28:10 1995 Rob Savoye <rob@darkstar.cygnus.com> - - * {hppro,m68k,r3000}/glue.c: Return correct value on receiving a - '\n' or '\r'. - -Fri Dec 30 15:05:03 1994 Rob Savoye <rob@darkstar.cygnus.com> - - * doc, doc/Makefile.in, configure.in: New directory. - * doc/porting.texi: New manual that explains porting the GNU tools - to embedded systems. - -Mon Dec 19 16:05:37 1994 Kung Hsu <kung@mexican.cygnus.com> - - * ex93x/Makefile.in: Use sparcl-stub.c instaed of sparc-stub.c, - which has hardware breakpoint support. - * ex93x/Makefile.in: Also generate slite930.o and slite931.o, instead - slite.o. - * ex93x/sparcl-stub.c: New file. - * ex93x/sparc-stub.c: Use latest from gdb/sparclite directory. - -Fri Dec 16 15:17:14 1994 Rob Savoye <rob@darkstar.cygnus.com> - - * r3000/crt0.S: Zero the bss section by words. - - * r3000/Makefile.in: Add in the rest of the support code for the - Array Tech board. - - * r3000/array.ld: Set the memory map for the Array Tech LSI - prototype. - - * r3000/array-io.c: Lowest level I/O code for Array Tech LSI - prototype using ROM entry points. - -Wed Dec 14 10:23:41 1994 Rob Savoye <rob@darkstar.cygnus.com> - - * hppro/crt0.S: Add _sr4export function so GDB calls work. - - * hppro/Makefile.in: Link in libc.a twice so atexit works(). - - * hppro/glue.c: Don't stub out __main anymore. - -Tue Dec 13 15:42:23 1994 Rob Savoye <rob@darkstar.cygnus.com> - - * r3000/Makefile.in: Look for both libgcc2 and libgcc. - - * r3000/glue.c,crt0.S,test.c: New support for for mips. - - * configure.in: Configure r3000 dir for a mips chip. - -Tue Dec 6 15:24:41 1994 Rob Savoye <rob@darkstar.cygnus.com> - - * hppro/divcnst-generic/*.S. Add .exit and .procend so it'll - compile. - - * hppro/Makefile.in: Link in the rest of the millicode routines. - -Mon Nov 21 20:21:48 1994 Rob Savoye <rob@darkstar.cygnus.com> - - * hppro/configure.in,config/dos.mh: Work for a canadian cross, - since xgcc is for the wrong architecture. - -Thu Nov 17 21:07:52 1994 Rob Savoye <rob@darkstar.cygnus.com> - - * config/default.mh: Find the corrrect libgcc2.a. - - * Makefile.in: Link in libgcc2.a by default. Build new millicode - routines. - - * divI.S, divU.S, multiply.S, remI.S, remU.S, test-div.c, - test-dyncall.c, test-mul.c: New millicode files for low level math - support. - - * test.c: Use printf so millicode gets exercised. - - * divcnst-fast/divU_10.S, divU_12.S, divU_3.S, divU_5.S, divU_6.S, - divU_9.S: Fast versions of some division routines. - - * divcnst-generic/divI_14.S, divI_5.S, divI_9.S, divU_14.S - divU_5.S, divU_9.S divI_10.S, divI_15.S, divI_6.S, divU_10.S, - divU_15.S, divU_6.S divI_12.S, divI_3.S, divI_7.S, divU_12.S, - divU_3.S, divU_7.S: Yet more millicode routines. - -Wed Nov 16 15:25:03 1994 Rob Savoye (rob@cygnus.com) - - * config/default.mh: Add default searches for the correct libc and - libm. - - * Makefile.in: Use ${LIBC_FOR_TARGET} and ${LIBM_FOR_TARGET} - - * hppro/w89k.ld,op50n.ld,Makefile.in: Don't try to link in libc - for the test program. - -Tue Nov 8 17:12:35 1994 Rob Savoye <rob@rtl.cygnus.com> - - * m68k/glue.c: Remove errno so there's no libc dependancies. - - * m68k/mvme135-asm.S: Moved setup_vectors and exceptionHandler - from mvme.S so the library can link without the stub. - - * m68k: New directory. Merge the idp, shared, and mvme135 - directories into one place. - - * config/default.mh: Use CC_FOR_TARGET for .S files so the - preprocessor actually gets run. - - * ex93x/crt0.s, ex93x/salib.c: Migrate changes from gdb/sparclite. - -Fri Sep 16 21:22:57 1994 Rob Savoye (rob@darkstar.cygnus.com) - - * shared, idp, mvme135: Support for Motorola IDP and MVME135 m68k - based target boards. Moved from newlib/stub. - - * ex93x: Move from newlib/stub/ex93x. Sparclite ex93x - board support. - - * hp74x, hppro: Add HP 742 & hp743 code "as is" with a working but - unfinished gdb stub. Add hppro for the WinBind and Oki Pa target - boards. - - * libgloss: Creation. A library for board support packages. The - Gnu low-level OS Support. Move mvme135/ChangeLog to here. - -Wed Sep 29 20:42:34 1993 Rob Savoye (rob@darkstar.cygnus.com) - - * mvme135/crt0.S, mvme135/glue.c: Moved to ../shared. - -Thu Apr 1 13:18:15 1993 Ian Lance Taylor (ian@cygnus.com) - - * mvme135/mvme.S: Renamed exceptionhandler to exceptionHandler, which is - what mvme135-stub.c expects. - -Tue Mar 30 18:44:43 1993 Doug Evans (dje@poseidon.cygnus.com) - - * mvme135/mvme135-stub.c (initializeRemcomErrorFrame): Remove reference to - __STDC__. - -Tue Dec 29 10:15:33 1992 Ian Lance Taylor (ian@cygnus.com) - - * mvme135/mvme135-asm.S: new file. - mvme135-stub.c: moved all assembler routines into mvme135-asm.S. - Makefile.in: build mvme135-stub.o. - - * ChangeLog: created. |