aboutsummaryrefslogtreecommitdiff
path: root/Makefile.in
diff options
context:
space:
mode:
Diffstat (limited to 'Makefile.in')
-rw-r--r--Makefile.in183
1 files changed, 107 insertions, 76 deletions
diff --git a/Makefile.in b/Makefile.in
index 7bf5b5a..70bf102 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -18,6 +18,12 @@
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
+# Tell GNU make 3.79 not to run the top level in parallel. This
+# prevents contention for $builddir/$target/config.cache, as well
+# as minimizing scatter in file system caches.
+NOTPARALLEL = .NOTPARALLEL
+$(NOTPARALLEL):
+
srcdir = .
prefix = /usr/local
@@ -87,14 +93,13 @@ CXXFLAGS = -g -O2
LDFLAGS =
LIBCFLAGS = $(CFLAGS)
+CFLAGS_FOR_BUILD = $(CFLAGS)
CFLAGS_FOR_TARGET = $(CFLAGS)
LDFLAGS_FOR_TARGET =
LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
PICFLAG =
PICFLAG_FOR_TARGET =
-CHILLFLAGS = $(CFLAGS)
-CHILL_LIB = -lchill
CXX = c++
# Use -O2 to stress test the compiler.
@@ -102,8 +107,6 @@ LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
-RANLIB = ranlib
-
DLLTOOL = dlltool
WINDRES = windres
@@ -173,7 +176,7 @@ OTHERS =
# This is set by the configure script to the list of directories which
# should be built using the target tools.
-TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib libio librx libstdc++ libg++ winsup opcodes bsp libstub cygmon libf2c libchill libobjc
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib librx winsup opcodes bsp libstub cygmon libf2c libobjc
# Target libraries are put under this directory:
# Changed by configure to $(target_alias) if cross.
@@ -204,7 +207,7 @@ HOST_LIB_PATH = $$r/bfd:$$r/opcodes
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that prorgams built for the target machine work.
-TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:$$r/$(TARGET_SUBDIR)/libstdc++
+TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:
# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
# Some platforms don't like blank entries, so we remove duplicate,
@@ -230,9 +233,9 @@ INSTALL_TARGET_CROSS = installdirs \
# Should be substed by configure.in
FLAGS_FOR_TARGET =
CC_FOR_TARGET =
-CHILL_FOR_TARGET =
CXX_FOR_TARGET =
CXX_FOR_TARGET_FOR_RECURSIVE_MAKE =
+GCJ_FOR_TARGET =
# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
@@ -353,9 +356,7 @@ BASE_FLAGS_TO_PASS = \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
- "CHILLFLAGS=$(CHILLFLAGS)" \
- "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
- "CHILL_LIB=$(CHILL_LIB)" \
+ "GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
@@ -393,6 +394,8 @@ BASE_FLAGS_TO_PASS = \
"libdir=$(libdir)" \
"libexecdir=$(libexecdir)" \
"lispdir=$(lispdir)" \
+ "libstdcxx_incdir=$(libstdcxx_incdir)" \
+ "libsubdir=$(libsubdir)" \
"localstatedir=$(localstatedir)" \
"mandir=$(mandir)" \
"oldincludedir=$(oldincludedir)" \
@@ -405,8 +408,7 @@ BASE_FLAGS_TO_PASS = \
"gxx_include_dir=$(gxx_include_dir)" \
"gcc_version=$(gcc_version)" \
"gcc_version_trigger=$(gcc_version_trigger)" \
- "target_alias=$(target_alias)" \
- "libsubdir=$(libsubdir)"
+ "target_alias=$(target_alias)"
# For any flags above that may contain shell code that varies from one
# target library to another. When doing recursive invocations of the
@@ -427,7 +429,7 @@ EXTRA_HOST_FLAGS = \
'DLLTOOL=$(DLLTOOL)' \
'LD=$(LD)' \
'NM=$(NM)' \
- 'RANLIB=$(RANLIB)' \
+ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
'WINDRES=$(WINDRES)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
@@ -481,9 +483,10 @@ EXTRA_GCC_FLAGS = \
'HOST_PREFIX=$(HOST_PREFIX)' \
'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
'NM=$(NM)' \
- 'RANLIB=$(RANLIB)' \
+ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
'WINDRES=$$(WINDRES_FOR_TARGET)' \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
+ "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
"`echo 'LANGUAGES=$(LANGUAGES)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s/.*=$$/XFOO=/`" \
@@ -492,6 +495,7 @@ EXTRA_GCC_FLAGS = \
"`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'ENQUIRE=$(ENQUIRE)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s/.*=$$/XFOO=/`"
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
@@ -528,6 +532,7 @@ ALL_MODULES = \
all-diff \
all-dosutils \
all-etc \
+ all-fastjar \
all-fileutils \
all-findutils \
all-find \
@@ -589,6 +594,7 @@ ALL_MODULES = \
NATIVE_CHECK_MODULES = \
check-bison \
check-byacc \
+ check-fastjar \
check-flex \
check-zip
@@ -681,6 +687,7 @@ INSTALL_MODULES = \
install-diff \
install-dosutils \
install-etc \
+ install-fastjar \
install-fileutils \
install-findutils \
install-find \
@@ -736,7 +743,6 @@ ALL_X11_MODULES = \
all-emacs19 \
all-gdb \
all-expect \
- all-gash \
all-guile \
all-tclX \
all-tk \
@@ -750,7 +756,6 @@ CHECK_X11_MODULES = \
check-gdb \
check-guile \
check-expect \
- check-gash \
check-tclX \
check-tk \
check-tix
@@ -763,7 +768,6 @@ INSTALL_X11_MODULES = \
install-gdb \
install-guile \
install-expect \
- install-gash \
install-tclX \
install-tk \
install-tk8.1 \
@@ -772,14 +776,10 @@ INSTALL_X11_MODULES = \
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
ALL_TARGET_MODULES = \
- all-target-libio \
- all-target-libstdc++ \
all-target-libstdc++-v3 \
all-target-librx \
- all-target-libg++ \
all-target-newlib \
all-target-libf2c \
- all-target-libchill \
all-target-libobjc \
all-target-libtermcap \
all-target-winsup \
@@ -799,14 +799,10 @@ ALL_TARGET_MODULES = \
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
CONFIGURE_TARGET_MODULES = \
- configure-target-libio \
- configure-target-libstdc++ \
configure-target-libstdc++-v3 \
configure-target-librx \
- configure-target-libg++ \
configure-target-newlib \
configure-target-libf2c \
- configure-target-libchill \
configure-target-libobjc \
configure-target-libtermcap \
configure-target-winsup \
@@ -826,13 +822,9 @@ CONFIGURE_TARGET_MODULES = \
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = \
- check-target-libio \
- check-target-libstdc++ \
check-target-libstdc++-v3 \
- check-target-libg++ \
check-target-newlib \
check-target-libf2c \
- check-target-libchill \
check-target-libobjc \
check-target-winsup \
check-target-libiberty \
@@ -846,13 +838,9 @@ CHECK_TARGET_MODULES = \
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
INSTALL_TARGET_MODULES = \
- install-target-libio \
- install-target-libstdc++ \
install-target-libstdc++-v3 \
- install-target-libg++ \
install-target-newlib \
install-target-libf2c \
- install-target-libchill \
install-target-libobjc \
install-target-libtermcap \
install-target-winsup \
@@ -884,6 +872,7 @@ CLEAN_MODULES = \
clean-diff \
clean-dosutils \
clean-etc \
+ clean-fastjar \
clean-fileutils \
clean-findutils \
clean-find \
@@ -936,14 +925,10 @@ CLEAN_MODULES = \
# All of the target modules that can be cleaned
CLEAN_TARGET_MODULES = \
- clean-target-libio \
- clean-target-libstdc++ \
clean-target-libstdc++-v3 \
clean-target-librx \
- clean-target-libg++ \
clean-target-newlib \
clean-target-libf2c \
- clean-target-libchill \
clean-target-libobjc \
clean-target-winsup \
clean-target-libgloss \
@@ -965,7 +950,6 @@ CLEAN_X11_MODULES = \
clean-emacs19 \
clean-gdb \
clean-expect \
- clean-gash \
clean-guile \
clean-tclX \
clean-tk \
@@ -1020,7 +1004,7 @@ $(DO_X):
if (cd ./$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
@@ -1038,7 +1022,7 @@ $(DO_X):
if (cd $(TARGET_SUBDIR)/$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
@@ -1071,6 +1055,11 @@ local-distclean:
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
+ -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
+ -rm -f texinfo/doc/Makefile texinfo/po/POTFILES
+ -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
+ -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
+ -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null
local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
@@ -1118,8 +1107,11 @@ clean-target-libgcc:
# Check target.
-.PHONY: check
-check: $(CHECK_MODULES) \
+.PHONY: check do-check
+check:
+ $(MAKE) do-check NOTPARALLEL=parallel-ok
+
+do-check: $(CHECK_MODULES) \
$(CHECK_TARGET_MODULES) \
$(CHECK_X11_MODULES) \
check-gcc
@@ -1416,6 +1408,7 @@ $(CONFIGURE_TARGET_MODULES):
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
@@ -1423,9 +1416,9 @@ $(CONFIGURE_TARGET_MODULES):
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
- cd $(TARGET_SUBDIR)/$${dir}; \
+ cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \
case $(srcdir) in \
- /*) \
+ /* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
@@ -1467,7 +1460,7 @@ $(CONFIGURE_TARGET_MODULES):
CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
- fi; \
+ fi || exit 1; \
if [ -f skip-this-dir ] ; then \
sh skip-this-dir; \
rm -f skip-this-dir; \
@@ -1649,6 +1642,18 @@ check-gcc:
true; \
fi
+.PHONY: check-c++
+check-c++:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
+ $(MAKE) check-target-libstdc++-v3; \
+ else \
+ true; \
+ fi
+
.PHONY: install-gcc
install-gcc:
@if [ -f ./gcc/Makefile ] ; then \
@@ -1689,7 +1694,7 @@ install-dosrel-fake:
ALL_GCC = all-gcc
ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
-ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++ all-target-libstdc++-v3
+ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++-v3
# This is a list of inter-dependencies among modules.
all-apache:
@@ -1700,7 +1705,7 @@ all-bash:
all-bfd: all-libiberty all-intl
all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl
all-bison: all-texinfo
-configure-target-boehm-gc: $(ALL_GCC_CXX) configure-target-qthreads
+configure-target-boehm-gc: $(ALL_GCC_C) configure-target-qthreads
all-target-boehm-gc: configure-target-boehm-gc
configure-target-bsp: $(ALL_GCC_C)
all-target-bsp: configure-target-bsp
@@ -1709,7 +1714,7 @@ all-bzip2:
all-cgen: all-libiberty
all-cvssrc:
configure-target-cygmon: $(ALL_GCC_C)
-all-target-cygmon: configure-target-cygmon all-target-libiberty all-target-libio all-target-libstub all-target-bsp
+all-target-cygmon: configure-target-cygmon all-target-libiberty all-target-libstub all-target-bsp
all-db:
all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
@@ -1724,7 +1729,6 @@ all-findutils:
all-find:
all-flex: all-libiberty all-bison all-byacc
all-gas: all-libiberty all-opcodes all-bfd all-intl
-all-gash: all-tcl
all-gawk:
all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib
all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib
@@ -1747,13 +1751,8 @@ all-intl:
all-ispell: all-emacs19
all-itcl: all-tcl all-tk all-tcl8.1 all-tk8.1
all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl
-configure-target-libg++: $(ALL_GCC_CXX) configure-target-librx
-all-target-libg++: configure-target-libg++ all-target-libiberty all-target-librx
configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: configure-target-libgloss configure-target-newlib
-configure-target-libio: $(ALL_GCC_C)
-all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
-check-target-libio: all-target-libstdc++
all-libgui: all-tcl all-tk all-tcl8.1 all-tk8.1 all-itcl
all-libiberty:
@@ -1761,12 +1760,10 @@ all-build-libiberty: configure-build-libiberty
configure-target-libffi: $(ALL_GCC_C)
all-target-libffi: configure-target-libffi
-configure-target-libjava: $(ALL_GCC_CXX) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
-all-target-libjava: configure-target-libjava all-zip all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
+configure-target-libjava: $(ALL_GCC_C) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
+all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
configure-target-librx: $(ALL_GCC_C)
all-target-librx: configure-target-librx
-configure-target-libstdc++: $(ALL_GCC_C)
-all-target-libstdc++: configure-target-libstdc++ all-target-libiberty all-target-libio
configure-target-libstdc++-v3: $(ALL_GCC_C)
all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty
configure-target-libstub: $(ALL_GCC_C)
@@ -1774,8 +1771,6 @@ all-target-libstub: configure-target-libstub
all-libtool:
configure-target-libf2c: $(ALL_GCC_C)
all-target-libf2c: configure-target-libf2c all-target-libiberty
-configure-target-libchill: $(ALL_GCC_C)
-all-target-libchill: configure-target-libchill all-target-libiberty
configure-target-libobjc: $(ALL_GCC_C)
all-target-libobjc: configure-target-libobjc all-target-libiberty
all-m4: all-libiberty all-texinfo
@@ -1819,6 +1814,9 @@ all-zip:
all-zlib:
configure-target-zlib: $(ALL_GCC_C)
all-target-zlib: configure-target-zlib
+all-fastjar: all-zlib all-libiberty
+configure-target-fastjar: configure-target-zlib
+all-target-fastjar: configure-target-fastjar all-target-zlib all-target-libiberty
configure-target-libiberty: $(ALL_GCC_C)
all-target-libiberty: configure-target-libiberty
all-target: $(ALL_TARGET_MODULES)
@@ -1910,13 +1908,17 @@ taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar-bz2 \
+ $(MAKE) -f Makefile.in do-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
-.PHONY: gdb-taz
-gdb-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+.PHONY: gdb-tar
+gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in do-proto-toplev \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
@@ -1929,7 +1931,18 @@ gdb-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar-bz2 \
+ $(MAKE) -f Makefile.in do-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+
+.PHONY: gdb-taz
+gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+ $(MAKE) -f Makefile.in gdb-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
@@ -1996,12 +2009,17 @@ do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
-rm -f $(PACKAGE)-$(VER)
ln -s proto-toplev $(PACKAGE)-$(VER)
-.PHONY: do-tar-bz2
-do-tar-bz2:
- echo "==> Making $(PACKAGE)-$(VER).tar.bz2"
- -rm -f $(PACKAGE)-$(VER).tar.bz2
+.PHONY: do-tar
+do-tar:
+ echo "==> Making $(PACKAGE)-$(VER).tar"
+ -rm -f $(PACKAGE)-$(VER).tar
find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
| tar cTfh - $(PACKAGE)-$(VER).tar
+
+.PHONY: do-bz2
+do-bz2:
+ echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
+ -rm -f $(PACKAGE)-$(VER).tar.bz2
$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
.PHONY: do-md5sum
@@ -2046,13 +2064,6 @@ gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
-.PHONY: libg++.tar.bz2
-LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
-libg++.tar.bz2: $(DIST_SUPPORT) libg++
- $(MAKE) -f Makefile.in taz TOOL=libg++ \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
-
GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
$(MAKE) -f Makefile.in taz TOOL=gnats \
@@ -2065,9 +2076,14 @@ gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
+.PHONY: gdb.tar
+gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-.PHONY: dejagnu.tar.bz2
DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
+.PHONY: dejagnu.tar.bz2
dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
$(MAKE) -f Makefile.in taz TOOL=dejagnu \
MD5PROG="$(MD5PROG)" \
@@ -2079,6 +2095,11 @@ gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
+.PHONY: gdb+dejagnu.tar
+gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: insight.tar.bz2
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
@@ -2086,6 +2107,11 @@ insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
+.PHONY: insight.tar
+insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar.bz2
INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
@@ -2093,6 +2119,11 @@ insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
+.PHONY: insight+dejagnu.tar
+insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: newlib.tar.bz2
NEWLIB_SUPPORT_DIRS=libgloss
generated by cgit v1.1 at 2024-11-15 00:50:22 +0000