aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--ChangeLog8
-rw-r--r--MAINTAINERS3
-rw-r--r--mpw-README376
-rw-r--r--mpw-build.in204
-rw-r--r--mpw-config.in113
-rw-r--r--mpw-configure448
-rw-r--r--mpw-install122
-rw-r--r--src-release1
8 files changed, 9 insertions, 1266 deletions
diff --git a/ChangeLog b/ChangeLog
index 492a553..76cea35 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,11 @@
+2004-03-25 Stan Shebs <shebs@apple.com>
+
+ Remove MPW support, no longer used.
+ * mpw-README, mpw-build.in, mpw-config.in, mpw-configure,
+ mpw-install: Remove files.
+ * src-release (DEVO_SUPPORT): Remove names of removed files.
+ * MAINTAINERS: Likewise.
+
2004-03-24 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.tpl (top level bootstrap support): Remove now-unneeded
diff --git a/MAINTAINERS b/MAINTAINERS
index c9ad6b3..7194268 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -100,8 +100,7 @@ winsup/
General discussion cygwin@sources.redhat.com.
See also winsup/MAINTAINERS.
-expect/; config-ml.in; mpw-README; mpw-build.in; mpw-config.in;
-mpw-configure; mpw-install; setup.com; missing; makefile.vms; utils/;
+expect/; config-ml.in; setup.com; missing; makefile.vms; utils/;
config/; config.if; makefile.vms; missing; ylwrap; mkdep; etc/;
install-sh; intl/
Ask DJ Delorie <dj@redhat.com> after reading the libiberty entry.
diff --git a/mpw-README b/mpw-README
deleted file mode 100644
index 767140b..0000000
--- a/mpw-README
+++ /dev/null
@@ -1,376 +0,0 @@
-This is basic information about the Macintosh(tm) MPW(tm) port of the
-GNU tools. The information below applies to both native and cross
-compilers.
-
-(Please note that there are two versions of this file; "mpw-README"
-is the source form, and "Read Me for MPW" is the distribution form.
-"Read Me for MPW" has 8-bit chars such as \Option-d embedded in it.)
-
-INSTALLING GNU TOOLS
-
-* System Requirements
-
-To use these tools, you will need a Mac with a 68020 or better or else
-any PowerMac, System 7.1 or later, and MPW 3.3 or 3.4. You will *not*
-need any other MPW compiler unless you want to rebuild from sources,
-nor even any include files, unless you are building actual Mac
-applications. For PowerMac native you will need PPCLink, however;
-also the executables are PowerPC-only.
-
-* Automated Installation
-
-The simplest way to install GNU tools is to run the Install script.
-The script will copy things to where you want to keep them, will build
-a UserStartup file with settings corresponding to where things were
-copied, and offer to put that UserStartup file in your MPW folder.
-
-The Install script does not alter anything in the System Folder, and
-it does not take any action without confirmation.
-
-The Install script will be at the top level of the binary
-distribution, or at the top level of the object directory if
-rebuilding from source. (The sources include a file called
-"mpw-install" at the top level, but it is the source to the Install
-script and cannot be run directly.)
-
-* Manual Installation
-
-If you don't want to run the Install script, you can do installation
-manually; this section describes the steps involved.
-
-The GNU tools can go in any directory that is in your {Commands} list.
-We generally put all the tools somewhere like {Boot}Cygnus:latest:bin,
-and then add to a UserStartup file:
-
- set Commands "{Boot}Cygnus:latest:bin:,{Commands}"
-
-However, the cpp and cc1 programs of GCC are not normally stored here.
-Instead, they will be in a "lib" directory that is alongside "bin",
-and organized by target and version underneath, with names like
-
- :lib:gcc-lib:<target>:cygnus-<version>:
-
-If you build and install everything yourself according to the build
-instructions below, then you will not have any problems. However, you
-may discover that GCC seems unable to find the right cpp and cc1;
-usually this will be because directory names have changed. (Even
-renaming your hard disk will make this happen.) In such cases, you
-have several choices. One is just to add this directory to
-{Commands}, but then you will not be able to get any other cpp or cc1,
-such as those used by a different target or version. Another way is
-to rename your disk and directories to match the prefix used when the
-tools were compiled. Finally, you can set the variable
-GCC_EXEC_PREFIX to point to the library directory:
-
- set GCC_EXEC_PREFIX MyDisk:Stuff:lib:gcc-lib:
- export GCC_EXEC_PREFIX
-
-You may also want to edit MPW's HEXA 128 resource. When GCC is built
-using a native GCC, it is compiled to use a special stack allocator
-function alloca(). While this is very efficient, it means that GCC
-will need considerable stack space to run, especially when compiling
-large programs with optimization turned on. You give MPW more stack
-by editing the HEXA 128 resource of the MPW Shell. A value of "0008
-0000" gives 512K of stack size, which is usually sufficient.
-
-USING GNU TOOLS
-
-* Using Native PowerMac GCC
-
-Using a native PowerMac GCC to produce MPW tools or MacOS applications
-is more complicated than just "gC foo.c", although no more complicated
-than with other Mac compilers.
-
-To build a native PowerMac MPW tool, use this sequence, where hello.c
-is the usual "hello world" program, and genericcfrg.r is the Rez file
-with the code fragment resource:
-
-gC -I{CIncludes} -fno-builtin -Dpascal= -c -g hello.c
-PPCLink hello.o -o hello \Option-d
- "{PPCLibraries}"StdCRuntime.o \Option-d
- "{SharedLibraries}"InterfaceLib \Option-d
- "{SharedLibraries}"StdCLib \Option-d
- "{PPCLibraries}"PPCToolLibs.o \Option-d
- "{PPCLibraries}"PPCCRuntime.o \Option-d
- "{GCCPPCLibraries}"libgcc.xcoff
-rez -d APPNAME='"'hello'"' GenericCFRG.r -o hello
-setfile -t 'MPST' -c 'MPS ' hello
-
-The same sequence works to build a MacOS application, but you set the file
-type to 'APPL' and don't link in PPCToolLibs.o. For further details on
-using MPW to build Mac applications, see the general MPW documentation.
-
-Recent versions of PPCLink have an option to generate the code
-fragment resource and automatically set creator and file type;
-here is what GenericCFRG.r should look like if you have an older
-PPCLink or are using GNU ld:
-
-#include "CodeFragmentTypes.r"
-
-resource 'cfrg' (0) {
- {
- kPowerPC,
- kFullLib,
- kNoVersionNum,kNoVersionNum,
- 0,0,
- kIsApp,kOnDiskFlat,kZeroOffset,kWholeFork,
- APPNAME // must be defined on Rez command line with -d option
- }
-};
-
-In general this port of GCC supports the same option syntax and
-behavior as its Unix counterpart. It also has similar compilation
-rules, so it will run the assembler on .s files and so forth.
-
-The GCC manual includes full information on the available options.
-One option that may be especially useful is "-v", which shows you what
-tools and options are being used; unlike most Mac C compilers, GCC
-directs assembly and linking in addition to compilation.
-
-MPW GCC does feature two extensions to the option syntax; '-d macro=name'
-works just as '-Dmacro=name' does in Unix, and '-i directory' works the
-same as '-Idirectory'.
-
-MPW GCC supports the usual Pascal-style strings and alignment pragmas.
-
-To find standard include files you can set the variable GCCIncludes:
-
- set GCCIncludes MyDisk:MyIncludes:
- export GCCIncludes
-
-GCCIncludes is similar to MPW's CIncludes or CW's MWCIncludes. In
-order to use MPW's usual include files, just say:
-
- set GCCIncludes "{CIncludes}"
- export GCCIncludes
-
-* Using GCC as a Cross-Compiler
-
-If you have a cross-compiler, and you have all of the correct
-target-side crt0 and libraries available, then to compile and link a
-file "foo.c", you can say just
-
- gC foo.c
-
-The output file will be an MPW binary file named "a.out"; the format
-of the contents will depend on which target is in use, so for instance
-a MIPS-targeting GCC will produce ECOFF or ELF executables.
-
-Note that using MPW include files with a cross-compiler is somewhat
-dangerous.
-
-* Using the Assembler and Friends
-
-The assembler ("as") and linker ("ld") are faithful ports of their
-Unix counterparts. Similarly, the binutils "ar", "cplusfilt", "nm",
-"objcopy", "objdump", "ranlib", "size", "strings", and "strip" are all
-like they are under Unix. (Note that "cplusfilt" is usually called
-"c++filt" under Unix.)
-
-* Using GDB
-
-There are two flavors of GDB. "gdb" is an MPW tool that works very
-much like it does in Unix; put a command into the MPW worksheet and
-type the <enter> key to send it to GDB. While "gdb" is running, you
-cannot do anything else in MPW, although you can switch to other
-Mac applications and use them.
-
-"SiowGDB" is also a Mac application, but it is GDB using the SIOW
-package to provide console emulation. Commands are exactly as for the
-MPW tool, but since this is its own application, you can switch
-between it and MPW.
-
-BUILDING GNU TOOLS
-
-This port of the GNU tools uses a configure script similar to
-that used for GNU tools under Unix, but rewritten for MPW. As with
-Unix configuration, there is an "object" directory that may be
-different from the "source" directory. In the example commands below,
-we will assume that we are currently in the object directory, and that
-the source directory is "{Boot}Cygnus:src:".
-
-* Requirements for Building
-
-In addition to the sources, you will need a set of tools that the
-configure and build scripts assume to be available. These tools
-(and their versions, if relevant) are as follows:
-
- byacc tool
- flex (2.3.7) tool (and Flex.skel file)
- forward-include script
- MoveIfChange script
- mpw-touch script
- mpw-true script
- NewFolderRecursive script
- null-command script
- open-brace script
- sed (1.13) tool
- tr-7to8 script
- true script
-
-The scripts are in the sources, under utils:mpw:. You must arrange to
-get the other tools yourself (they are readily available from the
-"usual" net sites, and are also on many CDROMS). In addition, there
-will usually be a set of these available at ftp.cygnus.com, in pub/mac.
-
-You may put the build tools in your usual Tools or Scripts
-directories, or keep them in a separate directories. We prefer to
-make a directory called "buildtools" and we put this in one of our
-UserStartup files:
-
- set Commands "{Boot}Cygnus:buildtools:,{Commands}"
-
-Flex uses an environment variable FLEX_SKELETON to locate its skeleton
-file, so you need to do something like this, preferably in a UserStartup:
-
- Set FLEX_SKELETON "{Boot}"Cygnus:buildtools:Flex.skel
- Export FLEX_SKELETON
-
-* Configuring
-
-Before you can build anything, you must configure. You do this by
-creating an directory where object files will be stored, setdirectory
-to that directory and do a configure command:
-
- {Boot}Cygnus:src:mpw-configure --target <name> --cc <compiler> --srcdir {Boot}Cygnus:src: --prefix <whatever>
-
-If the source directory is not in your {Commands} list, then you must
-supply a full pathname to mpw-configure, since mpw-configure invokes
-itself after switching into each subdirectory. Using a relative
-pathname, even something like ':mpw-configure', will therefore not work.
-
-<name> must be a known target. Valid ones include "m68k-apple-macos",
-"powerpc-apple-macos", "i386-unknown-go32", "mips-idt-ecoff", and
-"sh-hitachi-hms". Not all target types are accepted for all of the
-tools yet.
-
-<compiler> must be the name of the compiler to use. It defaults to "mpwc".
-
- (m68k)
- mpwc MPW C
- sc68k Symantec C
- mwc68k Metrowerks C (Codewarrior)
- gcc68k GCC
-
- (powerpc)
- ppcc PPCC
- mrc Macintosh on RisC (Mister C, aka(?) Frankenstein)
- scppc Symantec C
- mwcppc Metrowerks C (Codewarrior)
- gccppc GCC
-
-Not all compilers will compile all tools equally well! For m68k Macs,
-MPW C has the best record so far (it has problems, but they can be
-worked around), while for PowerMacs, CodeWarrior is the only compiler
-that has successfully compiled everything into running code.
-
-<prefix> is the path that "gcc" will prepend when looking for tools
-to execute. GCC_EXEC_PREFIX overrides this value, so you need not
-include it if you plan to use GCC_EXEC_PREFIX.
-
-As an example, here is the configure line that you could use to build
-native PowerMac GCC:
-
-"{Boot}"Cygnus:src:mpw-configure --cc mwcppc --target powerpc-apple-macos --srcdir "{Boot}"Cygnus:src: --prefix "{Boot}"GNUTools:
-
-* Building
-
-If you use CodeWarrior, you *must* first set MWCIncludes to
-{CIncludes}. This is because you will be building MPW tools, and
-their standard I/O works by making references to data that is part of
-the MPW Shell, which means that the code must be compiled and linked
-with macros that refer to that data, and those macros are in
-{CIncludes}, not the default {MWCIncludes}. Without this change, you
-will encounter problems compiling libiberty/mpw.c, but tweaking that
-file only masks the real problem, and does not fix it.
-
-The command
-
- mpw-build
-
-will build everything. Building will take over an hour on a Quadra 800
-or PowerMac 8100/110, longer if the sources are on a shared volume.
-
-You may see some warnings; these are mostly likely benign, typically
-disagreements about declarations of library and system functions.
-
-* Installing
-
-To install the just-built tools, use the command
-
- mpw-build install
-
-This part of the installation procedure just copies files to the
-location specified at configure time by <prefix>, and, in some cases,
-renames them from temporary internal names to their usual names. This
-install process is *not* the same as what the Install script does;
-Install can copy tools from the installation location chosen at
-configuration time to a user-chosen place, and sets up a UserStartup
-file. Note that while the Install script is optional, the install
-build action performs some tasks would be very hard to replicate
-manually, so you should always do it before using the tools.
-
-* Known Problems With Using Various Compilers to Build
-
-Most versions of MPW C have problems with compiling GNU software.
-
-MPW C 3.2.x has preprocessing bugs that render it incapable of
-compiling the BFD library, so it can't be used at all for building BFD.
-
-MPW C 3.3, 3.3.1, and 3.3.2 will spontaneously claim to have found
-errors in the source code, but in fact the code is perfectly fine. If
-this happens, just set the working directory back to the top-level
-objdir (where the configure command above was performed), and type
-"mpw-build all" again. If it goes on through the supposed error, then
-you got one of the spurious errors. A full build may require a number
-of these restarts.
-
-MPW C 3.3.3 seems to work OK, at least with the aid of a number of
-workarounds that are in the sources (look for #ifdef MPW_C).
-
-Versions of MPW Make earlier than 4.0d2 have exhibited bizarre behavior,
-failure to substitute variables and the like.
-
-Metrowerks CW6 PPC linker (MWLinkPPC) seems to do bad things with memory
-if the "Modern Memory Manager" is turned on (in the Memory control panel),
-but works OK if it is turned off.
-
-Metrowerks CW6 loses bigtime compiling opcodes:ppc-opc.c, which has
-some deeply nested macros. (CW7 is OK.) There is a way to patch the
-file, by substituting constant values. If you need to do this,
-contact shebs@cygnus.com for details.
-
-<Gestalt.h> is missing from {CIncludes} in the MPW version that comes
-with CW7. You can just copy the one in CW7's {MWCIncludes}.
-
-CW8 and later have changes to headers and such that will require changes
-to the source in order to be able to use them to rebuild.
-
-KNOWN BUGS
-
-The declarations for memcpy and memcmp in some versions of header files
-may conflict with GCC's builtin definition. Either use -fno-builtin
-or ignore the warnings.
-
-This is not a bug, but - watch out for cr/nl translation! For instance,
-if config/mpw-mh-mpw is not properly translated because it has been
-copied or updated separately, then everything will almost build, but
-you will get puzzling error messages from make or the compiler.
-
-'/' or ' ' embedded in any device, directory, or file name may or may
-not work.
-
-objcopy -O srec foo.o makes random output filenames.
-
-Mac-x-mips requires -mgas but Unix hosts don't.
-
-GDB will frequently require a '/' on the front of a device name in order
-to recognize it as an absolute rather than a relative pathname.
-
-GDB doesn't seem to use the printer port correctly, although it tries.
-
-The cursor doesn't always spin as much as it should. To get elaborate
-statistics and warnings about spin rates, add this to UserStartup:
-
- set MEASURE_SPIN all
- export MEASURE_SPIN
diff --git a/mpw-build.in b/mpw-build.in
deleted file mode 100644
index 86d9530..0000000
--- a/mpw-build.in
+++ /dev/null
@@ -1,204 +0,0 @@
-# Top-level script fragment to build everything for MPW.
-
-Set savedir "`Directory`"
-
-#Set Echo 1
-
-Set ThisScript "{0}"
-
-Set objdir ":"
-
-Set verify 0
-
-Set BuildTarget "none"
-
-# Parse arguments.
-
-Loop
- Break If {#} == 0
- If "{BuildTarget}" =~ /none/
- Set BuildTarget "{1}"
- Else
- Echo Only one build target allowed, ignoring "{1}"
- End If
- Shift 1
-End Loop
-
-If "{BuildTarget}" =~ /none/
- Set BuildTarget "all"
-End If
-
-If {verify} == 1
- Echo "#" Doing "{ThisScript}" "{BuildTarget}" in "`Directory`" ...
-End If
-
-Set ranmake 0
-
-If "`Exists Makefile`" != ""
- Echo "Set Echo 1" >{BuildTarget}.makeout
- Make -f Makefile {BuildTarget} >>{BuildTarget}.makeout
- {BuildTarget}.makeout
- Delete {BuildTarget}.makeout
- Set ranmake 1
-End If
-
-If "`Exists Makefile.PPC`" != ""
- Echo "Set Echo 1" >{BuildTarget}.makeout.ppc
- Make -f Makefile.PPC {BuildTarget} >>{BuildTarget}.makeout.ppc
- {BuildTarget}.makeout.ppc
- Delete {BuildTarget}.makeout.ppc
- Set ranmake 1
-End If
-
-If {ranmake} == 1
- Exit
-End If
-
-# Dispatch on various pseudo-targets.
-
-If "{BuildTarget}" =~ /all/
- Echo Started `Date`
- "{ThisScript}" all-gcc
- "{ThisScript}" all-gdb
- Echo Finished `Date`
-Else If "{BuildTarget}" =~ /all-libiberty/
- "{ThisScript}" do-libiberty
-Else If "{BuildTarget}" =~ /all-bfd/
- "{ThisScript}" do-bfd
-Else If "{BuildTarget}" =~ /all-opcodes/
- "{ThisScript}" do-opcodes
-Else If "{BuildTarget}" =~ /all-byacc/
- "{ThisScript}" do-byacc
-Else If "{BuildTarget}" =~ /all-flex/
- "{ThisScript}" all-libiberty
- "{ThisScript}" do-flex
-Else If "{BuildTarget}" =~ /all-binutils/
- "{ThisScript}" all-libiberty
- "{ThisScript}" all-bfd
- "{ThisScript}" all-opcodes
- "{ThisScript}" do-binutils
-Else If "{BuildTarget}" =~ /all-gas/
- "{ThisScript}" all-libiberty
- "{ThisScript}" all-bfd
- "{ThisScript}" all-opcodes
- "{ThisScript}" do-gas
-Else If "{BuildTarget}" =~ /all-gcc/
- "{ThisScript}" all-libiberty
- "{ThisScript}" all-gas
- "{ThisScript}" all-binutils
- "{ThisScript}" all-ld
- "{ThisScript}" do-gcc
-Else If "{BuildTarget}" =~ /all-gdb/
- "{ThisScript}" all-libiberty
- "{ThisScript}" all-bfd
- "{ThisScript}" all-opcodes
- "{ThisScript}" do-gdb
-Else If "{BuildTarget}" =~ /all-grez/
- "{ThisScript}" all-libiberty
- "{ThisScript}" all-bfd
- "{ThisScript}" do-grez
-Else If "{BuildTarget}" =~ /all-ld/
- "{ThisScript}" all-libiberty
- "{ThisScript}" all-bfd
- "{ThisScript}" all-opcodes
- "{ThisScript}" do-ld
-Else If "{BuildTarget}" =~ /do-byacc/
- SetDirectory :byacc:
- ::mpw-build all
-Else If "{BuildTarget}" =~ /do-flex/
- SetDirectory :flex:
- ::mpw-build _bootstrap
- ::mpw-build all
-Else If "{BuildTarget}" =~ /do-bfd/
- SetDirectory :bfd:
- ::mpw-build all
-Else If "{BuildTarget}" =~ /do-libiberty/
- SetDirectory :libiberty:
- ::mpw-build all
-Else If "{BuildTarget}" =~ /do-opcodes/
- SetDirectory :opcodes:
- ::mpw-build all
-Else If "{BuildTarget}" =~ /do-binutils/
- SetDirectory :binutils:
- ::mpw-build stamps
- ::mpw-build all
-Else If "{BuildTarget}" =~ /do-gas/
- SetDirectory :gas:
- ::mpw-build stamps
- ::mpw-build all
-Else If "{BuildTarget}" =~ /do-gcc/
- SetDirectory :gcc:
- :mpw-build all
-Else If "{BuildTarget}" =~ /do-gdb/
- SetDirectory :gdb:
- ::mpw-build all
-Else If "{BuildTarget}" =~ /do-grez/
- SetDirectory :grez:
- ::mpw-build all
-Else If "{BuildTarget}" =~ /do-ld/
- SetDirectory :ld:
- ::mpw-build all
-Else If "{BuildTarget}" =~ /do-newlib/
- SetDirectory :newlib:
- ::mpw-build all
-Else If "{BuildTarget}" =~ /install/
- "{ThisScript}" install-only-top
- "{ThisScript}" install-binutils
- "{ThisScript}" install-gas
- "{ThisScript}" install-gcc
- "{ThisScript}" install-ld
- "{ThisScript}" install-gdb
-Else If "{BuildTarget}" =~ /install-binutils/
- SetDirectory :binutils:
- ::mpw-build install
-Else If "{BuildTarget}" =~ /install-gas/
- SetDirectory :gas:
- ::mpw-build install
-Else If "{BuildTarget}" =~ /install-gcc/
- SetDirectory :gcc:
- :mpw-build install
-Else If "{BuildTarget}" =~ /install-gdb/
- SetDirectory :gdb:
- ::mpw-build install
-Else If "{BuildTarget}" =~ /install-grez/
- SetDirectory :grez:
- ::mpw-build install
-Else If "{BuildTarget}" =~ /install-ld/
- SetDirectory :ld:
- ::mpw-build install
-Else If "{BuildTarget}" =~ /install-only/
- "{ThisScript}" install-only-top
- "{ThisScript}" install-only-binutils
- "{ThisScript}" install-only-gas
- "{ThisScript}" install-only-gcc
- "{ThisScript}" install-only-gdb
- "{ThisScript}" install-only-ld
-Else If "{BuildTarget}" =~ /install-only-binutils/
- SetDirectory :binutils:
- ::mpw-build install-only
-Else If "{BuildTarget}" =~ /install-only-gas/
- SetDirectory :gas:
- ::mpw-build install-only
-Else If "{BuildTarget}" =~ /install-only-gcc/
- SetDirectory :gcc:
- :mpw-build install-only
-Else If "{BuildTarget}" =~ /install-only-gdb/
- SetDirectory :gdb:
- ::mpw-build install-only
-Else If "{BuildTarget}" =~ /install-only-grez/
- SetDirectory :grez:
- ::mpw-build install-only
-Else If "{BuildTarget}" =~ /install-only-ld/
- SetDirectory :ld:
- ::mpw-build install-only
-Else If "{BuildTarget}" =~ /install-only-top/
- NewFolderRecursive "{prefix}"
- If "{prefix}" != "`Directory`"
- Duplicate -y 'Read Me for MPW' "{prefix}"'Read Me for MPW'
- Duplicate -y Install "{prefix}"Install
- End If
-Else
- Echo {BuildTarget} not understood, ignoring
-End If
-
-SetDirectory "{savedir}"
diff --git a/mpw-config.in b/mpw-config.in
deleted file mode 100644
index 8028737..0000000
--- a/mpw-config.in
+++ /dev/null
@@ -1,113 +0,0 @@
-# Configuration fragment for Cygnus source tree.
-
-# Check that we can find all the special tools that we will need.
-# The test for sed is semi-pointless, because it's already been invoked
-# by the calculation of target_cpu in the main configure script, but
-# the test will also show which one is being used.
-
-Set Exit 0
-Echo byacc is `Which byacc`
-Echo flex is `Which flex`
-Echo forward-include is `Which forward-include`
-Echo MoveIfChange is `Which MoveIfChange`
-Echo mpw-touch is `Which mpw-touch`
-Echo mpw-true is `Which mpw-true`
-Echo NewFolderRecursive is `Which NewFolderRecursive`
-Echo null-command is `Which null-command`
-Echo open-brace is `Which open-brace`
-Echo sed is `Which sed`
-Echo 'tr-7to8' is `Which tr-7to8`
-Echo true is `Which true`
-Set Exit 1
-
-Set host_libs "mmalloc libiberty opcodes bfd readline gash tcl tk tclX"
-
-Set host_tools "texinfo byacc flex bison binutils ld gas gcc gdb make patch \Option-d
- prms send-pr gprof gdbtest tgas etc expect dejagnu sim bash \Option-d
- m4 autoconf ispell grep diff rcs cvs fileutils shellutils time \Option-d
- textutils wdiff find emacs emacs19 uudecode hello tar gzip indent \Option-d
- recode release sed utils guile perl apache inet gawk"
-
-Set target_libs "newlib"
-
-Set target_tools "examples"
-
-# Configure the resource compiler if targeting Macs.
-If {target_os} =~ /macos/ || {target_os} =~ /mpw/
- Set host_tools "{host_tools} grez"
-End If
-
-Set configdirs "{host_libs} {host_tools} {target_libs} {target_tools}"
-Export configdirs
-
-# Make up a special include directory that tools will share.
-
-If "`Exists "{objdir}"extra-include`" == ""
- NewFolder "{objdir}"extra-include
-End If
-
-Set edir "{objdir}extra-include:"
-
-forward-include "{srcdir}"include:mpw:sys:file.h "{edir}"'sys/file.h'
-forward-include "{srcdir}"include:mpw:sys:ioctl.h "{edir}"'sys/ioctl.h'
-forward-include "{srcdir}"include:mpw:sys:param.h "{edir}"'sys/param.h'
-forward-include "{srcdir}"include:mpw:sys:resource.h "{edir}"'sys/resource.h'
-forward-include "{srcdir}"include:mpw:sys:stat.h "{edir}"'sys/stat.h'
-forward-include "{srcdir}"include:mpw:sys:time.h "{edir}"'sys/time.h'
-forward-include "{srcdir}"include:mpw:sys:types.h "{edir}"'sys/types.h'
-
-forward-include "{srcroot}"include:aout:aout64.h "{edir}"'aout/aout64.h'
-forward-include "{srcroot}"include:aout:ar.h "{edir}"'aout/ar.h'
-forward-include "{srcroot}"include:aout:ranlib.h "{edir}"'aout/ranlib.h'
-forward-include "{srcroot}"include:aout:reloc.h "{edir}"'aout/reloc.h'
-forward-include "{srcroot}"include:aout:stab.def "{edir}"'aout/stab.def'
-forward-include "{srcroot}"include:aout:stab_gnu.h "{edir}"'aout/stab_gnu.h'
-
-If "`Exists "{srcroot}"include:aout:"{target_cpu}".h`" != ""
- forward-include "{srcroot}"include:aout:"{target_cpu}".h "{edir}"'aout/'"{target_cpu}"'.h'
-End If
-
-forward-include "{srcroot}"include:coff:ecoff.h "{edir}"'coff/ecoff.h'
-forward-include "{srcroot}"include:coff:internal.h "{edir}"'coff/internal.h'
-forward-include "{srcroot}"include:coff:sym.h "{edir}"'coff/sym.h'
-forward-include "{srcroot}"include:coff:symconst.h "{edir}"'coff/symconst.h'
-
-If "`Exists "{srcroot}"include:coff:"{target_cpu}".h`" != ""
- forward-include "{srcroot}"include:coff:"{target_cpu}".h "{edir}"'coff/'"{target_cpu}"'.h'
-End If
-If "{target_cpu}" =~ /powerpc/
- forward-include "{srcroot}"include:coff:rs6000.h "{edir}"'coff/rs6000.h'
-End If
-
-forward-include "{srcroot}"include:elf:common.h "{edir}"'elf/common.h'
-forward-include "{srcroot}"include:elf:dwarf.h "{edir}"'elf/dwarf.h'
-forward-include "{srcroot}"include:elf:dwarf2.h "{edir}"'elf/dwarf2.h'
-forward-include "{srcroot}"include:elf:external.h "{edir}"'elf/external.h'
-forward-include "{srcroot}"include:elf:internal.h "{edir}"'elf/internal.h'
-
-# Believe it or not, GDB needs this for all targets.
-forward-include "{srcroot}"include:elf:mips.h "{edir}"'elf/mips.h'
-
-If "`Exists "{srcroot}"include:elf:"{target_cpu}".h`" != ""
- forward-include "{srcroot}"include:elf:"{target_cpu}".h "{edir}"'elf/'"{target_cpu}"'.h'
-End If
-If "{target_cpu}" =~ /powerpc/
- forward-include "{srcroot}"include:elf:ppc.h "{edir}"'elf/ppc.h'
-End If
-
-If "`Exists "{srcroot}"include:opcode:"{target_cpu}".h`" != ""
- forward-include "{srcroot}"include:opcode:"{target_cpu}".h "{edir}"'opcode/'"{target_cpu}"'.h'
-End If
-If "{target_cpu}" =~ /powerpc/
- forward-include "{srcroot}"include:opcode:ppc.h "{edir}"'opcode/ppc.h'
-End If
-
-# Add some bfd includes that get mentioned outside the bfd dir.
-
-forward-include "{srcroot}"bfd:libcoff.h "{edir}"'bfd/libcoff.h'
-forward-include "{srcroot}"bfd:libecoff.h "{edir}"'bfd/libecoff.h'
-
-# Translate random files into MPW-only character set.
-
-tr-7to8 "{srcdir}"mpw-README > "{objdir}Read Me for MPW"
-tr-7to8 "{srcdir}"mpw-install > "{objdir}"Install
diff --git a/mpw-configure b/mpw-configure
deleted file mode 100644
index cf45148..0000000
--- a/mpw-configure
+++ /dev/null
@@ -1,448 +0,0 @@
-# Configuration script
-# Copyright (C) 1994, 1995, 1996 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-### WARNING
-### This script must NOT use any 8-bit chars!
-### WARNING
-
-# This is an MPW Shell script that sets everything up for compilation,
-# mainly creating directories, and editing copies of files.
-
-Set savedir "`Directory`"
-
-#Set Echo 1
-
-Set ThisScript "{0}"
-
-Set srcroot "--------"
-
-Set srcdir ":"
-
-Set objdir ":"
-
-Set prefix "{MPW}":GNUTools:
-
-Set exec_prefix ""
-
-Set bindir ""
-
-Set host_alias "m68k-apple-mpw"
-
-Set target_alias {host_alias}
-
-Set host_cc "mpwc"
-
-Set with_gnu_ld 0
-
-Set helpoutput 0
-
-Set recurse 1
-
-Set verify 0
-Set verifystr ""
-
-Set enable_options ""
-Set disable_options ""
-
-# Parse arguments.
-
-Loop
- Break If {#} == 0
- If "{1}" =~ /--cc/
- Set host_cc "{2}"
- Shift 1
- Else If "{1}" =~ /--bindir/
- Set bindir "{2}"
- Shift 1
- Else If "{1}" =~ /--disable-?+/
- Set `Echo {1} | sed -e 's/--disable-/enable_/'` no
- Set disable_options "{disable_options} '{1}'"
- Else If "{1}" =~ /--enable-?+/
- Set `Echo {1} | sed -e 's/--enable-/enable_/'` yes
- Set enable_options "{enable_options} '{1}'"
- Else If "{1}" =~ /--exec-prefix/
- Set exec_prefix "{2}"
- Shift 1
- Else If "{1}" =~ /--help/
- Set helpoutput 1
- Else If "{1}" =~ /--host/
- Set host_alias "{2}"
- Shift 1
- Else If "{1}" =~ /--norecursion/
- Set recurse 0
- Else If "{1}" =~ /--prefix/
- Set prefix "{2}"
- Shift 1
- Else If "{1}" =~ /--srcdir/
- Set srcdir "{2}"
- Shift 1
- Else If "{1}" =~ /--srcroot/
- Set srcroot "{2}"
- Shift 1
- Else If "{1}" =~ /--target/
- Set target_alias "{2}"
- Shift 1
- Else If "{1}" =~ /-v/
- Set verify 1
- Set verifystr "-v"
- Else If "{1}" =~ /--with-gnu-ld/
- Set with_gnu_ld 1
- Else
- Echo -n 'mpw-configure: Unrecognized option: "'
- Echo -n "{1}"
- Echo '"; use --help for usage.'
- Exit 1
- End If
- Shift 1
-End Loop
-
-If {helpoutput} == 1
- Echo "Usage: mpw-configure [OPTIONS]"
- Echo ""
- Echo "Options: [defaults in brackets]"
- Echo "--bindir DIR directory for binaries []"
- Echo "--cc CC use C compiler CC [mpwc]"
- Echo "--disable-FOO do not include feature FOO"
- Echo "--enable-FOO include feature FOO"
- Echo "--exec-prefix DIR install host-dependent files into DIR []"
- Echo "--help print this message"
- Echo "--host HOST configure for HOST [m68k-apple-mpw]"
- Echo "--norecursion configure this directory only [recurse]"
- Echo "--prefix DIR install into DIR [{MPW}:GNUTools:]"
- Echo "--srcdir DIR find the sources in DIR [:]"
- Echo "--srcroot DIR find the toplevel sources in DIR [:]"
- Echo "--target TARGET configure for TARGET [TARGET=HOST]"
- Echo "-v verbose"
- Echo "--with-gnu-ld link using GNU ld [no]"
- Exit 0
-End If
-
-Set Exit 0
-
-# Default exec_prefix from prefix.
-
-If "{exec_prefix}" == ""
- Set exec_prefix "{prefix}"
-End If
-
-If "{bindir}" == ""
- Set bindir "{prefix}"bin:
-End If
-
-# Point to the correct set of tools to use with the chosen compiler.
-
-If "{host_cc}" =~ /mpwc/
- Set host_alias "m68k-apple-mpw"
- Set cc_name '{CC_MPW_C}'
- Set segment_flag '-s '
- Set ar_name '{AR_LIB}'
- Set ranlib_name '{RANLIB_NULL}'
- Set cc_ld_name '{CC_LD_LINK}'
- Set prog_ext_name '{PROG_EXT_68K}'
- Set extralibs_name '{EXTRALIBS_C}'
- Set makepef_name '{MAKEPEF_NULL}'
- Set rez_name '{REZ_68K}'
-Else If "{host_cc}" =~ /sc68k/
- Set host_alias "m68k-apple-mpw"
- Set cc_name '{CC_SC}'
- Set segment_flag '-s '
- Set ar_name '{AR_LIB}'
- Set ranlib_name '{RANLIB_NULL}'
- Set cc_ld_name '{CC_LD_LINK}'
- Set prog_ext_name '{PROG_EXT_68K}'
- Set extralibs_name '{EXTRALIBS_C}'
- Set makepef_name '{MAKEPEF_NULL}'
- Set rez_name '{REZ_68K}'
-Else If "{host_cc}" =~ /mwc68k/
- Set host_alias "m68k-apple-mpw"
- Set cc_name '{CC_MWC68K}'
- Set segment_flag '-s '
- Set ar_name '{AR_MWLINK68K}'
- Set ranlib_name '{RANLIB_NULL}'
- Set cc_ld_name '{CC_LD_MWLINK68K}'
- Set prog_ext_name '{PROG_EXT_68K}'
- Set extralibs_name '{EXTRALIBS_MWC68K}'
- Set makepef_name '{MAKEPEF_NULL}'
- Set rez_name '{REZ_68K}'
-Else If "{host_cc}" =~ /gcc68k/
- Set host_alias "m68k-apple-mpw"
- Set cc_name '{CC_68K_GCC}'
- Set segment_flag '-s '
- Set ar_name '{AR_68K_AR}'
- Set ranlib_name '{RANLIB_RANLIB}'
- Set cc_ld_name '{CC_68K_GCC}'
- Set prog_ext_name '{PROG_EXT_68K}'
- Set extralibs_name '{EXTRALIBS_C}'
- Set makepef_name '{MAKEPEF_NULL}'
- Set rez_name '{REZ_68K}'
-Else If "{host_cc}" =~ /ppcc/
- Set host_alias "powerpc-apple-mpw"
- Set cc_name '{CC_PPCC}'
- Set segment_flag '-d ___s_e_g___='
- Set ar_name '{AR_PPCLINK}'
- Set ranlib_name '{RANLIB_NULL}'
- Set cc_ld_name '{CC_LD_PPCLINK}'
- Set prog_ext_name '{PROG_EXT_XCOFF}'
- Set extralibs_name '{EXTRALIBS_PPC}'
- Set makepef_name '{MAKEPEF_PPC}'
- Set rez_name '{REZ_PPC}'
-Else If "{host_cc}" =~ /mrc/
- Set host_alias "powerpc-apple-mpw"
- Set cc_name '{CC_MRC}'
- Set segment_flag '-d ___s_e_g___='
- Set ar_name '{AR_PPCLINK}'
- Set ranlib_name '{RANLIB_NULL}'
- Set cc_ld_name '{CC_LD_PPCLINK}'
- Set prog_ext_name '{PROG_EXT_XCOFF}'
- Set extralibs_name '{EXTRALIBS_PPC}'
- Set makepef_name '{MAKEPEF_PPC}'
- Set rez_name '{REZ_PPC}'
-Else If "{host_cc}" =~ /scppc/
- Set host_alias "powerpc-apple-mpw"
- Set cc_name '{CC_SC}'
- Set segment_flag '-d ___s_e_g___='
- Set ar_name '{AR_PPCLINK}'
- Set ranlib_name '{RANLIB_NULL}'
- Set cc_ld_name '{CC_LD_PPCLINK}'
- Set prog_ext_name '{PROG_EXT_XCOFF}'
- Set extralibs_name '{EXTRALIBS_PPC}'
- Set makepef_name '{MAKEPEF_PPC}'
- Set rez_name '{REZ_PPC}'
-Else If "{host_cc}" =~ /mwcppc/
- Set host_alias "powerpc-apple-mpw"
- Set cc_name '{CC_MWCPPC}'
- Set segment_flag '-d ___s_e_g___='
- Set ar_name '{AR_MWLINKPPC}'
- Set ranlib_name '{RANLIB_NULL}'
- Set cc_ld_name '{CC_LD_MWLINKPPC}'
- # Misleading, but we don't need a PEF step.
- Set prog_ext_name '{PROG_EXT_68K}'
- Set extralibs_name '{EXTRALIBS_MWCPPC}'
- Set makepef_name '{MAKEPEF_NULL}'
- Set rez_name '{REZ_PPC}'
-Else If "{host_cc}" =~ /gccppc/
- Set host_alias "powerpc-apple-mpw"
- Set cc_name '{CC_PPC_GCC}'
- Set segment_flag '-d ___s_e_g___='
- Set ar_name '{AR_PPCLINK}'
- If {with_gnu_ld} == 1
- Set ranlib_name '{RANLIB_RANLIB}'
- Set cc_ld_name '{CC_LD_GLD}'
- Else
- Set ranlib_name '{RANLIB_NULL}'
- Set cc_ld_name '{CC_LD_PPCLINK}'
- End If
- Set prog_ext_name '{PROG_EXT_XCOFF}'
- Set extralibs_name '{EXTRALIBS_PPC}'
- Set makepef_name '{MAKEPEF_PPC}'
- Set rez_name '{REZ_PPC}'
-Else
- Echo "{host_cc}" is not a known MPW compiler type
-End If
-
-Set dash_c_flag ''
-If "{host_cc}" =~ /gcc68k/
- Set dash_c_flag '-c'
-Else If "{host_cc}" =~ /gccppc/
- Set dash_c_flag '-c'
-End If
-
-# (should interpret aliases if not in canonical form)
-
-Set host_canonical "{host_alias}"
-
-Set target_canonical "{target_alias}"
-
-Set configdirs ""
-
-If "{srcroot}" =~ /--------/
- Set srcroot "{srcdir}"
-End If
-If "`Exists "{srcdir}"`" == ""
- Echo Source directory {srcdir} does not exist!
- Exit 1
-End If
-If "`Exists "{srcroot}"`" == ""
- Echo Top-level source directory {srcroot} does not exist!
- Exit 1
-End If
-
-Set target_cpu "`echo {target_canonical} | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`"
-Set target_vendor "`echo {target_canonical} | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`"
-Set target_os "`echo {target_canonical} | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`"
-
-# Create a file that is guaranteed to be older than any other here.
-
-If "`Exists "{objdir}"_oldest`" == ""
- mpw-touch _oldest
-End If
-
-# Record this before creating any files, makefiles sometimes mention
-# dependencies on config.status.
-
-Echo "# This directory was configured as follows:" >config.new
-Echo "{ThisScript} --host {host_alias} --target {target_alias} --srcdir {srcdir} --srcroot {srcroot} --prefix {prefix} --cc {host_cc} {verifystr} {enable_options} {disable_options} --norecursion" >>config.new
-MoveIfChange config.new config.status
-
-If "`Exists "{srcdir}"mpw-config.in`" != ""
- tr-7to8 "{srcdir}"mpw-config.in >"{objdir}"mpw-config.in
- Execute "{objdir}"mpw-config.in
-End If
-
-# Start Makefile construction by defining all the variables chosen by
-# configuration.
-
-Echo "# This Makefile produced by mpw-configure. Changes may get lost!" > "{objdir}"Makefile.tem
-Echo "srcroot = " {srcroot} >> "{objdir}"Makefile.tem
-Echo "topsrcdir = " {srcroot} >> "{objdir}"Makefile.tem
-Echo "srcdir = " {srcdir} >> "{objdir}"Makefile.tem
-Echo "mpw_prefix = " {prefix} >> "{objdir}"Makefile.tem
-Echo "mpw_exec_prefix = " {exec_prefix} >> "{objdir}"Makefile.tem
-Echo "mpw_bindir = " {bindir} >> "{objdir}"Makefile.tem
-Echo "host_alias = " {host_alias} >> "{objdir}"Makefile.tem
-Echo "target_alias = " {target_alias} >> "{objdir}"Makefile.tem
-Echo "target_cpu = " {target_cpu} >> "{objdir}"Makefile.tem
-Echo "target_vendor = " {target_vendor} >> "{objdir}"Makefile.tem
-Echo "target_os = " {target_os} >> "{objdir}"Makefile.tem
-Echo "target_canonical = " {target_canonical} >> "{objdir}"Makefile.tem
-Echo "host_makefile_frag = " >> "{objdir}"Makefile.tem
-Echo "target_makefile_frag = " >> "{objdir}"Makefile.tem
-Echo "CC = " {cc_name} >> "{objdir}"Makefile.tem
-Echo "AR = " {ar_name} >> "{objdir}"Makefile.tem
-Echo "RANLIB = " {ranlib_name} >> "{objdir}"Makefile.tem
-Echo "CC_LD = " {cc_ld_name} >> "{objdir}"Makefile.tem
-Echo "PROG_EXT = " {prog_ext_name} >> "{objdir}"Makefile.tem
-Echo "EXTRALIBS = " {extralibs_name} >> "{objdir}"Makefile.tem
-Echo "MAKEPEF = " {makepef_name} >> "{objdir}"Makefile.tem
-Echo "REZ = " {rez_name} >> "{objdir}"Makefile.tem
-
-If {host_cc} =~ /gccppc/
- Echo -n "dq =\Option-d\Option-d\Option-d" > "{objdir}"Makefile.tem0
- Echo '"' >> "{objdir}"Makefile.tem0
- tr-7to8 "{objdir}"Makefile.tem0 >>"{objdir}"Makefile.tem
-Else
- Echo -n "dq ='" >> "{objdir}"Makefile.tem
- Echo -n '"' >> "{objdir}"Makefile.tem
- Echo "'" >> "{objdir}"Makefile.tem
-End If
-
-# Append the master set of definitions for the various compilers.
-
-If "`Exists "{srcdir}"config:mpw-mh-mpw`" != ""
- tr-7to8 "{srcdir}"config:mpw-mh-mpw >>"{objdir}"Makefile.tem
-Else If "`Exists "{srcroot}"config:mpw-mh-mpw`" != ""
- tr-7to8 "{srcroot}"config:mpw-mh-mpw >>"{objdir}"Makefile.tem
-Else
- Echo "can't find a host config file!"
- Exit 0
-End If
-
-# Append anything produced by the directory's mpw-config.in.
-
-If "`Exists "{objdir}"mk.tmp`" != ""
- Catenate "{objdir}"mk.tmp >>"{objdir}"Makefile.tem
- # An mpw-config.in might change so as not to create this
- # anymore, so get rid of it now to be safe.
- Delete -i -y "{objdir}"mk.tmp
-End If
-
-# If there are sed scripts to edit the Unix Makefile.in, use them; otherwise
-# use an mpw-make.in if present.
-
-If "`Exists "{srcdir}"mpw-make.sed`" != ""
- If "`Exists "{objdir}"hacked_Makefile.in`" != ""
- Set MakefileIn "{objdir}"hacked_Makefile.in
- Else
- Set MakefileIn "{srcdir}"Makefile.in
- End If
- # Find the generic makefile editing script.
- If "`Exists "{srcroot}"config:mpw:g-mpw-make.sed`" != ""
- sed -f "{srcroot}"config:mpw:g-mpw-make.sed "{MakefileIn}" >"{objdir}"Makefile.tem1
- Else If "`Exists "{srcroot}"utils:mpw:g-mpw-make.sed`" != ""
- sed -f "{srcroot}"utils:mpw:g-mpw-make.sed "{MakefileIn}" >"{objdir}"Makefile.tem1
- Else If "`Exists "{srcdir}"g-mpw-make.sed`" != ""
- sed -f "{srcdir}"g-mpw-make.sed "{MakefileIn}" >"{objdir}"Makefile.tem1
- Else
- Echo Warning: g-mpw-make.sed not found, copying "{MakefileIn}" verbatim...
- Catenate "{MakefileIn}" >"{objdir}"Makefile.tem1
- End If
- sed -f "{srcdir}"mpw-make.sed "{objdir}"Makefile.tem1 >"{objdir}"Makefile.tem2
- sed -e 's/^prefix = .*$/prefix = {mpw_prefix}/g' -e 's/^exec_prefix = .*$/exec_prefix = {mpw_exec_prefix}/g' -e 's/^bindir = @bindir@/bindir = {mpw_bindir}/g' "{objdir}"Makefile.tem2 >"{objdir}"Makefile.tem3
- sed -e "s/@DASH_C_FLAG@/{dash_c_flag}/" -e "s/@SEGMENT_FLAG(\([^)]*\))@/{segment_flag}\1/" "{objdir}"Makefile.tem3 >"{objdir}"mpw-make.in
- tr-7to8 "{objdir}"mpw-make.in >>"{objdir}"Makefile.tem
- If "`Exists "{objdir}"mk.sed`" != ""
- sed -f "{objdir}"mk.sed "{objdir}"Makefile.tem >"{objdir}"Makefile.tem2
- Rename -y "{objdir}"Makefile.tem2 "{objdir}"Makefile.tem
- End If
- MoveIfChange "{objdir}"Makefile.tem "{objdir}"Makefile
- Delete -i -y "{objdir}"Makefile.tem[12]
- If {verify} == 1
- Echo Created Makefile in "`Directory`"
- End If
-Else If "`Exists "{srcdir}"mpw-make.in`" != ""
- sed -e 's/^prefix = .*$/prefix = {mpw_prefix}/g' "{srcdir}"mpw-make.in >"{objdir}"Makefile.tem1
- sed -e "s/@DASH_C_FLAG@/{dash_c_flag}/" -e "s/@SEGMENT_FLAG(\([^)]*\))@/{segment_flag}}\1/" "{objdir}"Makefile.tem1 >"{objdir}"Makefile.tem2
- tr-7to8 "{objdir}"Makefile.tem2 >>"{objdir}"Makefile.tem
- If "`Exists "{objdir}"mk.sed`" != ""
- sed -f "{objdir}"mk.sed "{objdir}"Makefile.tem >"{objdir}"Makefile.tem2
- Rename -y "{objdir}"Makefile.tem2 "{objdir}"Makefile.tem
- End If
- MoveIfChange "{objdir}"Makefile.tem "{objdir}"Makefile
- Delete -i -y "{objdir}"Makefile.tem[12]
- If {verify} == 1
- Echo Created Makefile in "`Directory`"
- End If
-End If
-
-# Produce a build script if the source is defined.
-
-If "`Exists "{srcdir}"mpw-build.in`" != ""
- Echo "Set srcroot " {srcroot} > "{objdir}"mpw-build.tem
- Echo "Set srcdir " {srcdir} >> "{objdir}"mpw-build.tem
- Echo "Set target_canonical " {target_canonical} >> "{objdir}"mpw-build.tem
- Echo "Set prefix " {prefix} >> "{objdir}"mpw-build.tem
- tr-7to8 "{srcdir}"mpw-build.in >>"{objdir}"mpw-build.tem
- MoveIfChange "{objdir}"mpw-build.tem "{objdir}"mpw-build
- If {verify} == 1
- Echo Created mpw-build in "`Directory`"
- End If
-End If
-
-# Apply ourselves recursively to the list of subdirectories to configure.
-
-If {recurse} == 1
- For subdir In {configdirs}
- Set savedir "`Directory`"
- If "`Exists "{srcdir}{subdir}:"`" == ""
- If {verify} == 1
- Echo No "{srcdir}{subdir}:" found, skipping
- End If
- Continue
- End If
- If {verify} == 1
- Echo Configuring {subdir}...
- End If
- If "`Exists "{objdir}{subdir}:"`" == ""
- NewFolder "{objdir}{subdir}"
- End If
- SetDirectory "{objdir}{subdir}:"
- "{ThisScript}" --target "{target_canonical}" --srcdir "{srcdir}{subdir}:" --srcroot "{srcroot}" --prefix "{prefix}" --cc "{host_cc}" {verifystr} {enable_options} {disable_options}
- SetDirectory "{savedir}"
- End For
-End If
-
-SetDirectory "{savedir}"
diff --git a/mpw-install b/mpw-install
deleted file mode 100644
index 04c5aac..0000000
--- a/mpw-install
+++ /dev/null
@@ -1,122 +0,0 @@
-# GNU Install script for MPW.
-
-Set OldExit "{Exit}"
-Set Exit 0
-
-Set TempUserStartup "{TempFolder}"__temp__UserStartup
-
-Echo '# UserStartup generated by GNU Install script' > "{TempUserStartup}"
-Echo '' >> "{TempUserStartup}"
-
-# (should) Check that disk space is sufficient for installation.
-
-# Assume that the install script is where everything else is.
-
-Set thisdir "`Directory`"
-
-# Copy the binaries to the desired place.
-
-Confirm -t "Copy the binaries to somewhere else?"
-Set TmpStatus {Status}
-If {TmpStatus} == 0
- Set bindest "`GetFileName -d -m "Where to install the binaries?"`"
- If {Status} == 0
- If "`Exists "{thisdir}bin"`" != ""
- For afile In "{thisdir}"bin:\Option-x
- Duplicate -y "{afile}" "{bindest}"
- End For
- Else
- Echo "bin directory not found, exiting"
- Exit 1
- End If
- Else
- Echo "No destination supplied, exiting"
- Exit 1
- End If
-Else If {TmpStatus} == 4
- # Use the existing directory.
- Set bindest "{thisdir}bin:"
-Else
- # Cancelled from confirmation, escape altogether.
- Exit 1
-End If
-
-# Copy the libraries to the desired place.
-
-Confirm -t "Copy the libraries to somewhere else?"
-Set TmpStatus {Status}
-If {TmpStatus} == 0
- Set libdest "`GetFileName -d -m "Where to install the libraries?"`"
- If {Status} == 0
- If "`Exists "{thisdir}lib:"`" != ""
- For afile In "{thisdir}"lib:\Option-x
- Duplicate -y "{afile}" "{libdest}"
- End For
- Else
- Echo "lib directory not found, exiting"
- Exit 1
- End If
- Else
- Echo "No destination supplied, exiting"
- Exit 1
- End If
-Else If {TmpStatus} == 4
- # Use the existing directory.
- Set libdest "{thisdir}lib:"
-Else
- # Cancelled from confirmation, escape altogether.
- Exit 1
-End If
-
-
-# Add the location of the binaries to the command path.
-
-Echo -n 'Set Commands "' >> "{TempUserStartup}"
-Echo -n "{bindest}" >> "{TempUserStartup}"
-Echo ',{Commands}"' >> "{TempUserStartup}"
-Echo '' >> "{TempUserStartup}"
-
-# Set up GCC exec prefix.
-
-Set gcclibdir "{libdest}"gcc-lib:
-
-Echo -n 'Set GCC_EXEC_PREFIX "' >> "{TempUserStartup}"
-Echo -n "{gcclibdir}" >> "{TempUserStartup}"
-Echo '"' >> "{TempUserStartup}"
-Echo "Export GCC_EXEC_PREFIX" >> "{TempUserStartup}"
-Echo '' >> "{TempUserStartup}"
-
-# Set up path to libgcc.xcoff etc.
-
-Echo -n 'Set GCCPPCLibraries "' >> "{TempUserStartup}"
-Echo -n "{libdest}" >> "{TempUserStartup}"
-Echo '"' >> "{TempUserStartup}"
-Echo "Export GCCPPCLibraries" >> "{TempUserStartup}"
-Echo '' >> "{TempUserStartup}"
-
-# Display contents of UserStartup, confirm installation.
-
-Set UserStartupName "UserStartup\Option-8GNU"
-
-Echo "Contents of" {UserStartupName} "will be:"
-Catenate "{TempUserStartup}"
-
-Confirm "Install {UserStartupName} into the MPW folder {MPW} ?"
-If {Status} == 0
- Duplicate "{TempUserStartup}" "{MPW}{UserStartupName}"
- Delete -y "{TempUserStartup}"
-Else
- Echo "{UserStartupName} file not installed"
-End If
-
-# (should) Check HEXA resource, warn if low.
-
-# (should) Check for spaces in pathnames, warn if found.
-
-Echo "Installation was successful."
-Echo ""
-Echo "Be sure to review the usage notes in 'Read Me for MPW' before proceeding!"
-
-# Restore previous settings.
-
-Set Exit "{OldExit}"
diff --git a/src-release b/src-release
index 4fec631..42d5c20 100644
--- a/src-release
+++ b/src-release
@@ -45,7 +45,6 @@ PWD = $${PWDCMD-pwd}
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.if config.sub config move-if-change \
- mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
mkinstalldirs ltconfig ltmain.sh missing ylwrap \
libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh \