aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--ChangeLog19
-rw-r--r--MAINTAINERS2
-rw-r--r--Makefile.in5
-rw-r--r--Makefile.tpl5
-rw-r--r--config-ml.in847
-rwxr-xr-xdjunpack.bat52
-rw-r--r--include/ChangeLog14
-rw-r--r--include/bfdlink.h3
-rw-r--r--include/gdb/ChangeLog6
-rw-r--r--include/gdb/sim-d10v.h11
-rw-r--r--include/hashtab.h5
-rw-r--r--include/xtensa-isa-internal.h2
-rw-r--r--src-release3
13 files changed, 963 insertions, 11 deletions
diff --git a/ChangeLog b/ChangeLog
index 3008cc6..787355c 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,22 @@
+2003-05-05 H.J. Lu <hjl@gnu.org>
+
+ * config-ml.in: Restored from gcc repository.
+
+2003-05-02 Chris Demetriou <cgd@broadcom.com>
+
+ * Makefile.tpl: Require "makeinfo" from texinfo 4.2 or later.
+ * Makefile.in: Regenerate.
+
+2003-04-27 Daniel Jacobowitz <drow@mvista.com>
+
+ * src-release (DEVO_SUPPORT): Add src-release, Makefile.tpl,
+ and Makefile.def.
+
+2003-04-27 Daniel Jacobowitz <drow@mvista.com>
+
+ * Makefile.tpl: Clean $(BUILD_SUBDIR).
+ * Makefile.in: Regenerated.
+
2003-04-18 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
* Makefile.tpl (MAKEINFOFLAGS): Default to --split-size=5000000.
diff --git a/MAINTAINERS b/MAINTAINERS
index a2e155b..718d374 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9,7 +9,7 @@ Makefile.in; configure; configure.in
binutils@sources.redhat.com
gdb-patches@sources.redhat.com
-bfd/; binutils/; gas/; gprof/; ld/; opcodes/; BFD's part of include/
+bfd/; binutils/; gas/; gprof/; ld/; opcodes/; cpu/; BFD's part of include/
binutils: http://sources.redhat.com/binutils/
Patches to binutils@sources.redhat.com.
Please notify the following of any interface changes:
diff --git a/Makefile.in b/Makefile.in
index 1b993f5..3f3ea9a 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -191,13 +191,13 @@ M4 = `if [ -f $$r/m4/m4 ] ; \
then echo $$r/m4/m4 ; \
else echo ${DEFAULT_M4} ; fi`
-# For an installed makeinfo, we require it to be from texinfo 4 or
+# For an installed makeinfo, we require it to be from texinfo 4.2 or
# higher, else we use the "missing" dummy.
MAKEINFO=@MAKEINFO@
USUAL_MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
then echo $$r/texinfo/makeinfo/makeinfo ; \
else if (makeinfo --version \
- | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])') >/dev/null 2>&1; \
then echo makeinfo; else echo $$s/missing makeinfo; fi; fi`
# This just becomes part of the MAKEINFO definition passed down to
@@ -1112,6 +1112,7 @@ local-distclean:
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
+ -rm -rf $(BUILD_SUBDIR)
-rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
-rm -f texinfo/doc/Makefile texinfo/po/POTFILES
-rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
diff --git a/Makefile.tpl b/Makefile.tpl
index 314c449..b634b35 100644
--- a/Makefile.tpl
+++ b/Makefile.tpl
@@ -194,13 +194,13 @@ M4 = `if [ -f $$r/m4/m4 ] ; \
then echo $$r/m4/m4 ; \
else echo ${DEFAULT_M4} ; fi`
-# For an installed makeinfo, we require it to be from texinfo 4 or
+# For an installed makeinfo, we require it to be from texinfo 4.2 or
# higher, else we use the "missing" dummy.
MAKEINFO=@MAKEINFO@
USUAL_MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
then echo $$r/texinfo/makeinfo/makeinfo ; \
else if (makeinfo --version \
- | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])') >/dev/null 2>&1; \
then echo makeinfo; else echo $$s/missing makeinfo; fi; fi`
# This just becomes part of the MAKEINFO definition passed down to
@@ -672,6 +672,7 @@ local-distclean:
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
+ -rm -rf $(BUILD_SUBDIR)
-rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
-rm -f texinfo/doc/Makefile texinfo/po/POTFILES
-rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
diff --git a/config-ml.in b/config-ml.in
index e69de29..e227500 100644
--- a/config-ml.in
+++ b/config-ml.in
@@ -0,0 +1,847 @@
+# Configure fragment invoked in the post-target section for subdirs
+# wanting multilib support.
+#
+# It is advisable to support a few --enable/--disable options to let the
+# user select which libraries s/he really wants.
+#
+# Subdirectories wishing to use multilib should put the following lines
+# in the "post-target" section of configure.in.
+#
+# if [ "${srcdir}" = "." ] ; then
+# if [ "${with_target_subdir}" != "." ] ; then
+# . ${with_multisrctop}../../config-ml.in
+# else
+# . ${with_multisrctop}../config-ml.in
+# fi
+# else
+# . ${srcdir}/../config-ml.in
+# fi
+#
+#
+# Things are complicated because 6 separate cases must be handled:
+# 2 (native, cross) x 3 (absolute-path, relative-not-dot, dot) = 6.
+#
+# srcdir=. is special. It must handle make programs that don't handle VPATH.
+# To implement this, a symlink tree is built for each library and for each
+# multilib subdir.
+#
+# The build tree is layed out as
+#
+# ./
+# newlib
+# m68020/
+# newlib
+# m68881/
+# newlib
+#
+# The nice feature about this arrangement is that inter-library references
+# in the build tree work without having to care where you are. Note that
+# inter-library references also work in the source tree because symlink trees
+# are built when srcdir=.
+#
+# Unfortunately, trying to access the libraries in the build tree requires
+# the user to manually choose which library to use as GCC won't be able to
+# find the right one. This is viewed as the lesser of two evils.
+#
+# Configure variables:
+# ${with_target_subdir} = "." for native, or ${target_alias} for cross.
+# Set by top level Makefile.
+# ${with_multisrctop} = how many levels of multilibs there are in the source
+# tree. It exists to handle the case of configuring in the source tree:
+# ${srcdir} is not constant.
+# ${with_multisubdir} = name of multilib subdirectory (eg: m68020/m68881).
+#
+# Makefile variables:
+# MULTISRCTOP = number of multilib levels in source tree (+1 if cross)
+# (FIXME: note that this is different than ${with_multisrctop}. Check out.).
+# MULTIBUILDTOP = number of multilib levels in build tree
+# MULTIDIRS = list of multilib subdirs (eg: m68000 m68020 ...)
+# (only defined in each library's main Makefile).
+# MULTISUBDIR = installed subdirectory name with leading '/' (eg: /m68000)
+# (only defined in each multilib subdir).
+
+# FIXME: Multilib is currently disabled by default for everything other than
+# newlib. It is up to each target to turn on multilib support for the other
+# libraries as desired.
+
+# Autoconf incoming variables:
+# srcdir, host, ac_configure_args
+#
+# We *could* figure srcdir and host out, but we'd have to do work that
+# our caller has already done to figure them out and requiring these two
+# seems reasonable.
+# Note that `host' in this case is GCC's `target'. Target libraries are
+# configured for a particular host.
+
+Makefile=${ac_file-Makefile}
+ml_config_shell=${CONFIG_SHELL-/bin/sh}
+ml_arguments="${ac_configure_args}"
+ml_realsrcdir=${srcdir}
+
+# Scan all the arguments and set all the ones we need.
+
+ml_verbose=--verbose
+for option in ${ml_arguments}
+do
+ case $option in
+ --*) ;;
+ -*) option=-$option ;;
+ esac
+
+ case $option in
+ --*=*)
+ optarg=`echo $option | sed -e 's/^[^=]*=//'`
+ ;;
+ esac
+
+ case $option in
+ --disable-*)
+ enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
+ eval $enableopt=no
+ ;;
+ --enable-*)
+ case "$option" in
+ *=*) ;;
+ *) optarg=yes ;;
+ esac
+ enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
+ eval $enableopt="$optarg"
+ ;;
+ --norecursion | --no*)
+ ml_norecursion=yes
+ ;;
+ --silent | --sil* | --quiet | --q*)
+ ml_verbose=--silent
+ ;;
+ --verbose | --v | --verb*)
+ ml_verbose=--verbose
+ ;;
+ --with-*)
+ case "$option" in
+ *=*) ;;
+ *) optarg=yes ;;
+ esac
+ withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
+ eval $withopt="$optarg"
+ ;;
+ --without-*)
+ withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
+ eval $withopt=no
+ ;;
+ esac
+done
+
+# Only do this if --enable-multilib.
+if [ "${enable_multilib}" = yes ]; then
+
+# Compute whether this is the library's top level directory
+# (ie: not a multilib subdirectory, and not a subdirectory like newlib/src).
+# ${with_multisubdir} tells us we're in the right branch, but we could be
+# in a subdir of that.
+# ??? The previous version could void this test by separating the process into
+# two files: one that only the library's toplevel configure.in ran (to
+# configure the multilib subdirs), and another that all configure.in's ran to
+# update the Makefile. It seemed reasonable to collapse all multilib support
+# into one file, but it does leave us with having to perform this test.
+ml_toplevel_p=no
+if [ -z "${with_multisubdir}" ]; then
+ if [ "${srcdir}" = "." ]; then
+ # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
+ # ${with_target_subdir} = "." for native, otherwise target alias.
+ if [ "${with_target_subdir}" = "." ]; then
+ if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
+ ml_toplevel_p=yes
+ fi
+ else
+ if [ -f ${ml_realsrcdir}/../../config-ml.in ]; then
+ ml_toplevel_p=yes
+ fi
+ fi
+ else
+ # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
+ if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
+ ml_toplevel_p=yes
+ fi
+ fi
+fi
+
+# If this is the library's top level directory, set multidirs to the
+# multilib subdirs to support. This lives at the top because we need
+# `multidirs' set right away.
+
+if [ "${ml_toplevel_p}" = yes ]; then
+
+multidirs=
+for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
+ dir=`echo $i | sed -e 's/;.*$//'`
+ if [ "${dir}" = "." ]; then
+ true
+ else
+ if [ -z "${multidirs}" ]; then
+ multidirs="${dir}"
+ else
+ multidirs="${multidirs} ${dir}"
+ fi
+ fi
+done
+
+# Target libraries are configured for the host they run on, so we check
+# $host here, not $target.
+
+case "${host}" in
+arc-*-elf*)
+ if [ x$enable_biendian != xyes ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *be*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ ;;
+arm-*-*)
+ if [ x"$enable_fpu" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *fpu*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_26bit" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *26bit*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_underscore" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *under*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_interwork" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *interwork*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_biendian = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *le* ) : ;;
+ *be* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_nofmult" = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *nofmult* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ ;;
+m68*-*-*)
+ if [ x$enable_softfloat = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *soft-float* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_m68881 = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *m68881* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_m68000 = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *m68000* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_m68020 = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *m68020* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ ;;
+mips*-*-*)
+ if [ x$enable_single_float = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *single* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_biendian = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *el* ) : ;;
+ *eb* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_softfloat = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *soft-float* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ case " $multidirs " in
+ *" mabi=64 "*)
+ # We will not be able to create libraries with -mabi=64 if
+ # we cannot even link a trivial program. It usually
+ # indicates the 64bit libraries are missing.
+ if echo 'main() {}' > conftest.c &&
+ ${CC-gcc} -mabi=64 conftest.c -o conftest; then
+ :
+ else
+ echo Could not link program with -mabi=64, disabling it.
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *mabi=64* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ rm -f conftest.c conftest
+ ;;
+ esac
+ ;;
+powerpc*-*-* | rs6000*-*-*)
+ if [ x$enable_aix64 = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *ppc64* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_pthread = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *pthread* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_softfloat = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *soft-float* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_powercpu = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ power | */power | */power/* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_powerpccpu = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *powerpc* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_powerpcos = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *mcall-linux* | *mcall-solaris* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_biendian = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *mlittle* | *mbig* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_sysv = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *mcall-sysv* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ ;;
+sparc*-*-*)
+ case " $multidirs " in
+ *" m64 "*)
+ # We will not be able to create libraries with -m64 if
+ # we cannot even link a trivial program. It usually
+ # indicates the 64bit libraries are missing.
+ if echo 'main() {}' > conftest.c &&
+ ${CC-gcc} -m64 conftest.c -o conftest; then
+ :
+ else
+ echo Could not link program with -m64, disabling it.
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *m64* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ rm -f conftest.c conftest
+ ;;
+ esac
+ ;;
+esac
+
+# Remove extraneous blanks from multidirs.
+# Tests like `if [ -n "$multidirs" ]' require it.
+multidirs=`echo "$multidirs" | sed -e 's/^[ ][ ]*//' -e 's/[ ][ ]*$//' -e 's/[ ][ ]*/ /g'`
+
+# Add code to library's top level makefile to handle building the multilib
+# subdirs.
+
+cat > Multi.tem <<\EOF
+
+PWD=$${PWDCMD-pwd}
+
+# FIXME: There should be an @-sign in front of the `if'.
+# Leave out until this is tested a bit more.
+multi-do:
+ if [ -z "$(MULTIDIRS)" ]; then \
+ true; \
+ else \
+ rootpre=`${PWD}`/; export rootpre; \
+ srcrootpre=`cd $(srcdir); ${PWD}`/; export srcrootpre; \
+ lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
+ compiler="$(CC)"; \
+ for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
+ dir=`echo $$i | sed -e 's/;.*$$//'`; \
+ if [ "$${dir}" = "." ]; then \
+ true; \
+ else \
+ if [ -d ../$${dir}/$${lib} ]; then \
+ flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
+ if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(CFLAGS) $${flags}" \
+ prefix="$(prefix)" \
+ exec_prefix="$(exec_prefix)" \
+ GCJFLAGS="$(GCJFLAGS) $${flags}" \
+ CXXFLAGS="$(CXXFLAGS) $${flags}" \
+ LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
+ LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
+ LDFLAGS="$(LDFLAGS) $${flags}" \
+ DESTDIR="$(DESTDIR)" \
+ $(DO)); then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else true; \
+ fi; \
+ fi; \
+ done; \
+ fi
+
+# FIXME: There should be an @-sign in front of the `if'.
+# Leave out until this is tested a bit more.
+multi-clean:
+ if [ -z "$(MULTIDIRS)" ]; then \
+ true; \
+ else \
+ lib=`${PWD} | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
+ for dir in Makefile $(MULTIDIRS); do \
+ if [ -f ../$${dir}/$${lib}/Makefile ]; then \
+ if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
+ then true; \
+ else exit 1; \
+ fi; \
+ else true; \
+ fi; \
+ done; \
+ fi
+EOF
+
+cat ${Makefile} Multi.tem > Makefile.tem
+rm -f ${Makefile} Multi.tem
+mv Makefile.tem ${Makefile}
+
+fi # ${ml_toplevel_p} = yes
+
+if [ "${ml_verbose}" = --verbose ]; then
+ echo "Adding multilib support to Makefile in ${ml_realsrcdir}"
+ if [ "${ml_toplevel_p}" = yes ]; then
+ echo "multidirs=${multidirs}"
+ fi
+ echo "with_multisubdir=${with_multisubdir}"
+fi
+
+if [ "${srcdir}" = "." ]; then
+ if [ "${with_target_subdir}" != "." ]; then
+ ml_srcdotdot="../"
+ else
+ ml_srcdotdot=""
+ fi
+else
+ ml_srcdotdot=""
+fi
+
+if [ -z "${with_multisubdir}" ]; then
+ ml_subdir=
+ ml_builddotdot=
+ : # ml_srcdotdot= # already set
+else
+ ml_subdir="/${with_multisubdir}"
+ # The '[^/][^/]*' appears that way to work around a SunOS sed bug.
+ ml_builddotdot=`echo ${with_multisubdir} | sed -e 's:[^/][^/]*:..:g'`/
+ if [ "$srcdir" = "." ]; then
+ ml_srcdotdot=${ml_srcdotdot}${ml_builddotdot}
+ else
+ : # ml_srcdotdot= # already set
+ fi
+fi
+
+if [ "${ml_toplevel_p}" = yes ]; then
+ ml_do='$(MAKE)'
+ ml_clean='$(MAKE)'
+else
+ ml_do=true
+ ml_clean=true
+fi
+
+# TOP is used by newlib and should not be used elsewhere for this purpose.
+# MULTI{SRC,BUILD}TOP are the proper ones to use. MULTISRCTOP is empty
+# when srcdir != builddir. MULTIBUILDTOP is always some number of ../'s.
+# FIXME: newlib needs to be updated to use MULTI{SRC,BUILD}TOP so we can
+# delete TOP. Newlib may wish to continue to use TOP for its own purposes
+# of course.
+# MULTIDIRS is non-empty for the cpu top level Makefile (eg: newlib/Makefile)
+# and lists the subdirectories to recurse into.
+# MULTISUBDIR is non-empty in each cpu subdirectory's Makefile
+# (eg: newlib/h8300h/Makefile) and is the installed subdirectory name with
+# a leading '/'.
+# MULTIDO is used for targets like all, install, and check where
+# $(FLAGS_TO_PASS) augmented with the subdir's compiler option is needed.
+# MULTICLEAN is used for the *clean targets.
+#
+# ??? It is possible to merge MULTIDO and MULTICLEAN into one. They are
+# currently kept separate because we don't want the *clean targets to require
+# the existence of the compiler (which MULTIDO currently requires) and
+# therefore we'd have to record the directory options as well as names
+# (currently we just record the names and use --print-multi-lib to get the
+# options).
+
+sed -e "s:^TOP[ ]*=[ ]*\([./]*\)[ ]*$:TOP = ${ml_builddotdot}\1:" \
+ -e "s:^MULTISRCTOP[ ]*=.*$:MULTISRCTOP = ${ml_srcdotdot}:" \
+ -e "s:^MULTIBUILDTOP[ ]*=.*$:MULTIBUILDTOP = ${ml_builddotdot}:" \
+ -e "s:^MULTIDIRS[ ]*=.*$:MULTIDIRS = ${multidirs}:" \
+ -e "s:^MULTISUBDIR[ ]*=.*$:MULTISUBDIR = ${ml_subdir}:" \
+ -e "s:^MULTIDO[ ]*=.*$:MULTIDO = $ml_do:" \
+ -e "s:^MULTICLEAN[ ]*=.*$:MULTICLEAN = $ml_clean:" \
+ ${Makefile} > Makefile.tem
+rm -f ${Makefile}
+mv Makefile.tem ${Makefile}
+
+# If this is the library's top level, configure each multilib subdir.
+# This is done at the end because this is the loop that runs configure
+# in each multilib subdir and it seemed reasonable to finish updating the
+# Makefile before going on to configure the subdirs.
+
+if [ "${ml_toplevel_p}" = yes ]; then
+
+# We must freshly configure each subdirectory. This bit of code is
+# actually partially stolen from the main configure script. FIXME.
+
+if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
+
+ if [ "${ml_verbose}" = --verbose ]; then
+ echo "Running configure in multilib subdirs ${multidirs}"
+ echo "pwd: `${PWDCMD-pwd}`"
+ fi
+
+ ml_origdir=`${PWDCMD-pwd}`
+ ml_libdir=`echo $ml_origdir | sed -e 's,^.*/,,'`
+ # cd to top-level-build-dir/${with_target_subdir}
+ cd ..
+
+ for ml_dir in ${multidirs}; do
+
+ if [ "${ml_verbose}" = --verbose ]; then
+ echo "Running configure in multilib subdir ${ml_dir}"
+ echo "pwd: `${PWDCMD-pwd}`"
+ fi
+
+ if [ -d ${ml_dir} ]; then true; else
+ # ``mkdir -p ${ml_dir}'' See also mkinstalldirs.
+ pathcomp=""
+ for d in `echo ":${ml_dir}" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`; do
+ pathcomp="$pathcomp$d"
+ case "$pathcomp" in
+ -* ) pathcomp=./$pathcomp ;;
+ esac
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp" 1>&2
+ mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
+ fi
+ if test ! -d "$pathcomp"; then
+ exit $lasterr
+ fi
+ pathcomp="$pathcomp/"
+ done
+ fi
+ if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi
+
+ # Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../
+ dotdot=../`echo ${ml_dir} | sed -e 's|[^/]||g' -e 's|/|../|g'`
+
+ case ${srcdir} in
+ ".")
+ echo Building symlink tree in `${PWDCMD-pwd}`/${ml_dir}/${ml_libdir}
+ if [ "${with_target_subdir}" != "." ]; then
+ ml_unsubdir="../"
+ else
+ ml_unsubdir=""
+ fi
+ (cd ${ml_dir}/${ml_libdir};
+ ../${dotdot}${ml_unsubdir}symlink-tree ../${dotdot}${ml_unsubdir}${ml_libdir} "")
+ if [ -f ${ml_dir}/${ml_libdir}/Makefile ]; then
+ if [ x"${MAKE}" = x ]; then
+ (cd ${ml_dir}/${ml_libdir}; make distclean)
+ else
+ (cd ${ml_dir}/${ml_libdir}; ${MAKE} distclean)
+ fi
+ fi
+ ml_newsrcdir="."
+ ml_srcdiroption=
+ multisrctop=${dotdot}
+ ;;
+ *)
+ case "${srcdir}" in
+ /* | [A-Za-z]:[\\/]* ) # absolute path
+ ml_newsrcdir=${srcdir}
+ ;;
+ *) # otherwise relative
+ ml_newsrcdir=${dotdot}${srcdir}
+ ;;
+ esac
+ ml_srcdiroption="-srcdir=${ml_newsrcdir}"
+ multisrctop=
+ ;;
+ esac
+
+ case "${progname}" in
+ /* | [A-Za-z]:[\\/]* ) ml_recprog=${progname} ;;
+ *) ml_recprog=${dotdot}${progname} ;;
+ esac
+
+ # FIXME: POPDIR=${PWD=`pwd`} doesn't work here.
+ ML_POPDIR=`${PWDCMD-pwd}`
+ cd ${ml_dir}/${ml_libdir}
+
+ if [ -f ${ml_newsrcdir}/configure ]; then
+ ml_recprog="${ml_newsrcdir}/configure --cache-file=../config.cache"
+ fi
+
+ # find compiler flag corresponding to ${ml_dir}
+ for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
+ dir=`echo $i | sed -e 's/;.*$//'`
+ if [ "${dir}" = "${ml_dir}" ]; then
+ flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`
+ break
+ fi
+ done
+ ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags" GCJ="${GCJ_}$flags"'
+
+ if [ "${with_target_subdir}" = "." ]; then
+ CC_=$CC' '
+ CXX_=$CXX' '
+ GCJ_=$GCJ' '
+ else
+ # Create a regular expression that matches any string as long
+ # as ML_POPDIR.
+ popdir_rx=`echo ${ML_POPDIR} | sed 's,.,.,g'`
+ CC_=
+ for arg in ${CC}; do
+ case $arg in
+ -[BIL]"${ML_POPDIR}"/*)
+ CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\1/p"`' ' ;;
+ "${ML_POPDIR}"/*)
+ CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ *)
+ CC_="${CC_}${arg} " ;;
+ esac
+ done
+
+ CXX_=
+ for arg in ${CXX}; do
+ case $arg in
+ -[BIL]"${ML_POPDIR}"/*)
+ CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ "${ML_POPDIR}"/*)
+ CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ *)
+ CXX_="${CXX_}${arg} " ;;
+ esac
+ done
+
+ GCJ_=
+ for arg in ${GCJ}; do
+ case $arg in
+ -[BIL]"${ML_POPDIR}"/*)
+ GCJ_="${GCJ_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ "${ML_POPDIR}"/*)
+ GCJ_="${GCJ_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ *)
+ GCJ_="${GCJ_}${arg} " ;;
+ esac
+ done
+
+ if test "x${LD_LIBRARY_PATH+set}" = xset; then
+ LD_LIBRARY_PATH_=
+ for arg in `echo "$LD_LIBRARY_PATH" | tr ':' ' '`; do
+ case "$arg" in
+ "${ML_POPDIR}"/*)
+ arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
+ ;;
+ esac
+ if test "x$LD_LIBRARY_PATH_" != x; then
+ LD_LIBRARY_PATH_=$LD_LIBRARY_PATH_:$arg
+ else
+ LD_LIBRARY_PATH_=$arg
+ fi
+ done
+ ml_config_env="$ml_config_env LD_LIBRARY_PATH=$LD_LIBRARY_PATH_"
+ fi
+
+ if test "x${SHLIB_PATH+set}" = xset; then
+ SHLIB_PATH_=
+ for arg in `echo "$SHLIB_PATH" | tr ':' ' '`; do
+ case "$arg" in
+ "${ML_POPDIR}"/*)
+ arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
+ ;;
+ esac
+ if test "x$SHLIB_PATH_" != x; then
+ SHLIB_PATH_=$SHLIB_PATH_:$arg
+ else
+ SHLIB_PATH_=$arg
+ fi
+ done
+ ml_config_env="$ml_config_env SHLIB_PATH=$SHLIB_PATH_"
+ fi
+ fi
+
+ if eval ${ml_config_env} ${ml_config_shell} ${ml_recprog} \
+ --with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \
+ ${ml_arguments} ${ml_srcdiroption} ; then
+ true
+ else
+ exit 1
+ fi
+
+ cd ${ML_POPDIR}
+
+ done
+
+ cd ${ml_origdir}
+fi
+
+fi # ${ml_toplevel_p} = yes
+fi # ${enable_multilib} = yes
diff --git a/djunpack.bat b/djunpack.bat
new file mode 100755
index 0000000..f09f5ed
--- /dev/null
+++ b/djunpack.bat
@@ -0,0 +1,52 @@
+@echo off
+Rem
+Rem WARNING WARNING WARNING: This file needs to have DOS CRLF end-of-line
+Rem format, or else stock DOS/Windows shells will refuse to run it.
+Rem
+Rem This batch file unpacks the GDB distribution while simultaneously
+Rem renaming some of the files whose names are invalid on DOS or conflict
+Rem with other file names after truncation to DOS 8+3 namespace.
+Rem
+Rem Invoke like this:
+Rem
+Rem djunpack gdb-XYZ.tar
+Rem
+Rem where XYZ is the version number. If the argument includes leading
+Rem directories, it MUST use backslashes, not forward slashes.
+Rem
+Rem The following 2 lines need to be changed with each new GDB release, to
+Rem be identical to the name of the top-level directory where the GDB
+Rem distribution unpacks itself.
+set GDBVER=gdb-5.0
+if "%GDBVER%"=="gdb-5.0" GoTo EnvOk
+Rem If their environment space is too small, re-exec with a larger one
+command.com /e:4096 /c %0 %1
+GoTo End
+:EnvOk
+if not exist %1 GoTo NoArchive
+djtar -x -p -o %GDBVER%/gdb/config/djgpp/fnchange.lst %1 > fnchange.tmp
+Rem The following uses a feature of COPY whereby it does not copy
+Rem empty files. We need that because the previous line will create
+Rem an empty fnchange.tmp even if the command failed for some reason.
+copy fnchange.tmp junk.tmp > nul
+if not exist junk.tmp GoTo NoDjTar
+del junk.tmp
+sed -e 's,@V@,%GDBVER%,g' < fnchange.tmp > fnchange.lst
+Rem See the comment above about the reason for using COPY.
+copy fnchange.lst junk.tmp > nul
+if not exist junk.tmp GoTo NoSed
+del junk.tmp
+djtar -x -n fnchange.lst %1
+GoTo End
+:NoSed
+echo FAIL: Sed is not available.
+GoTo End
+:NoDjTar
+echo FAIL: DJTAR is not available or no fnchange.lst file in %1.
+GoTo End
+:NoArchive
+echo FAIL: the file %1 does not seem to exist.
+echo Remember that %1 cannot use forward slashes, only backslashes.
+GoTo End
+:End
+set GDBVER=
diff --git a/include/ChangeLog b/include/ChangeLog
index 3d7ec5c..b88ca78 100644
--- a/include/ChangeLog
+++ b/include/ChangeLog
@@ -1,3 +1,17 @@
+2003-05-09 Alan Modra <amodra@bigpond.net.au>
+
+ * xtensa-isa-internal.h (xtensa_isa_module_struct): Remove const on
+ gen_num_opcodes_fn return type.
+
+2003-05-07 Jason Merrill <jason@redhat.com>
+
+ * hashtab.h (iterative_hash): Prototype.
+ (iterative_hash_object): New macro.
+
+2003-04-28 H.J. Lu <hjl@gnu.org>
+
+ * bfdlink.h (bfd_link_info): Add relax_finalizing.
+
2003-04-23 H.J. Lu <hjl@gnu.org>
* bfdlink.h (bfd_link_callbacks): Add error_handler.
diff --git a/include/bfdlink.h b/include/bfdlink.h
index acb7449..380923a 100644
--- a/include/bfdlink.h
+++ b/include/bfdlink.h
@@ -288,6 +288,9 @@ struct bfd_link_info
/* TRUE if global symbols in discarded sections should be stripped. */
unsigned int strip_discarded: 1;
+ /* TRUE if relaxation is being finalized. */
+ unsigned int relax_finalizing: 1;
+
/* Which symbols to strip. */
enum bfd_link_strip strip;
diff --git a/include/gdb/ChangeLog b/include/gdb/ChangeLog
index 9a216a0..77a8551 100644
--- a/include/gdb/ChangeLog
+++ b/include/gdb/ChangeLog
@@ -1,3 +1,9 @@
+2003-05-07 Andrew Cagney <cagney@redhat.com>
+
+ * sim-d10v.h (sim_d10v_translate_addr): Add regcache parameter.
+ (sim_d10v_translate_imap_addr): Add regcache parameter.
+ (sim_d10v_translate_dmap_addr): Ditto.
+
2003-03-27 Nick Clifton <nickc@redhat.com>
* sim-arm.h (sim_arm_regs): Add iWMMXt registers.
diff --git a/include/gdb/sim-d10v.h b/include/gdb/sim-d10v.h
index f153a41..8294b14 100644
--- a/include/gdb/sim-d10v.h
+++ b/include/gdb/sim-d10v.h
@@ -58,20 +58,23 @@ extern unsigned long sim_d10v_translate_dmap_addr
(unsigned long offset,
int nr_bytes,
unsigned long *phys,
- unsigned long (*dmap_register) (int reg_nr));
+ void *regcache,
+ unsigned long (*dmap_register) (void *regcache, int reg_nr));
extern unsigned long sim_d10v_translate_imap_addr
(unsigned long offset,
int nr_bytes,
unsigned long *phys,
- unsigned long (*imap_register) (int reg_nr));
+ void *regcache,
+ unsigned long (*imap_register) (void *regcache, int reg_nr));
extern unsigned long sim_d10v_translate_addr
(unsigned long vaddr,
int nr_bytes,
unsigned long *phys,
- unsigned long (*dmap_register) (int reg_nr),
- unsigned long (*imap_register) (int reg_nr));
+ void *regcache,
+ unsigned long (*dmap_register) (void *regcache, int reg_nr),
+ unsigned long (*imap_register) (void *regcache, int reg_nr));
/* The simulator makes use of the following register information. */
diff --git a/include/hashtab.h b/include/hashtab.h
index 7acb5eb..f7bd4ae 100644
--- a/include/hashtab.h
+++ b/include/hashtab.h
@@ -183,6 +183,11 @@ extern htab_eq htab_eq_pointer;
/* A hash function for null-terminated strings. */
extern hashval_t htab_hash_string PARAMS ((const PTR));
+/* An iterative hash function for arbitrary data. */
+extern hashval_t iterative_hash PARAMS ((const PTR, size_t, hashval_t));
+/* Shorthand for hashing something with an intrinsic size. */
+#define iterative_hash_object(OB,INIT) iterative_hash (&OB, sizeof (OB), INIT)
+
#ifdef __cplusplus
}
#endif /* __cplusplus */
diff --git a/include/xtensa-isa-internal.h b/include/xtensa-isa-internal.h
index d2244c5..7f221ea 100644
--- a/include/xtensa-isa-internal.h
+++ b/include/xtensa-isa-internal.h
@@ -104,7 +104,7 @@ typedef struct xtensa_isa_internal_struct
typedef struct xtensa_isa_module_struct
{
- const int (*get_num_opcodes_fn) (void);
+ int (*get_num_opcodes_fn) (void);
xtensa_opcode_internal **(*get_opcodes_fn) (void);
int (*decode_insn_fn) (const xtensa_insnbuf);
struct config_struct *(*get_config_table_fn) (void);
diff --git a/src-release b/src-release
index b5eca52..2b8fa45 100644
--- a/src-release
+++ b/src-release
@@ -48,7 +48,8 @@ DEVO_SUPPORT= README Makefile.in configure configure.in \
mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
mkinstalldirs ltconfig ltmain.sh missing ylwrap \
- libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
+ libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh \
+ Makefile.def Makefile.tpl src-release
# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
generated by cgit v1.1 at 2024-11-14 21:36:51 +0000