| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We can use *Set::insert_range to collapse:
for (auto Elem : Range)
Set.insert(E);
down to:
Set.insert_range(Range);
|
|
As part of the "RemoveDIs" project, BasicBlock::iterator now carries a
debug-info bit that's needed when getFirstNonPHI and similar feed into
instruction insertion positions. Call-sites where that's necessary were
updated a year ago; but to ensure some type safety however, we'd like to
have all calls to moveBefore use iterators.
This patch adds a (guaranteed dereferenceable) iterator-taking
moveBefore, and changes a bunch of call-sites where it's obviously safe
to change to use it by just calling getIterator() on an instruction
pointer. A follow-up patch will contain less-obviously-safe changes.
We'll eventually deprecate and remove the instruction-pointer
insertBefore, but not before adding concise documentation of what
considerations are needed (very few).
|
|
Follow up to https://github.com/llvm/llvm-project/issues/123569
|
|
After 9fe78db4, the pass inserts `store volatile i32 -1, ptr %call_site`
before all invoke instruction except the one in the entry block, which
has the effect of bypassing landing pads on exceptions.
When configuring the call site for a potentially throwing instruction
check that it is not `InvokeInst` -- they are handled by earlier code.
|
|
|
|
Rename the function to reflect its correct behavior and to be consistent
with `Module::getOrInsertFunction`. This is also in preparation of
adding a new `Intrinsic::getDeclaration` that will have behavior similar
to `Module::getFunction` (i.e, just lookup, no creation).
|
|
Similar to https://github.com/llvm/llvm-project/pull/96902, this adds
`getDataLayout()` helpers to Function and GlobalValue, replacing the
current `getParent()->getDataLayout()` pattern.
|
|
Reverts the above commit, as it updates a common header function and
did not update all callsites:
https://lab.llvm.org/buildbot/#/builders/29/builds/382
This reverts commit 6481dc57612671ebe77fe9c34214fba94e1b3b27.
|
|
Uses the new InsertPosition class (added in #94226) to simplify some of
the IRBuilder interface, and removes the need to pass a BasicBlock
alongside a BasicBlock::iterator, using the fact that we can now get the
parent basic block from the iterator even if it points to the sentinel.
This patch removes the BasicBlock argument from each constructor or call
to setInsertPoint.
This has no functional effect, but later on as we look to remove the
`Instruction *InsertBefore` argument from instruction-creation
(discussed
[here](https://discourse.llvm.org/t/psa-instruction-constructors-changing-to-iterator-only-insertion/77845)),
this will simplify the process by allowing us to deprecate the
InsertPosition constructor directly and catch all the cases where we use
instructions rather than iterators.
|
|
These are the last remaining "trivial" changes to passes that use
Instruction pointers for insertion. All of this should be NFC, it's just
changing the spelling of how we identify a position.
In one or two locations, I'm also switching uses of getNextNode etc to
using std::next with iterators. This too should be NFC.
---------
Merged by: Stephen Tozer <stephen.tozer@sony.com>
|
|
(#84920)
inverse_depth_first df_iterator_default_set as default set, so there's
no need to explicitly use inverse_depth_first_ext.
PR: https://github.com/llvm/llvm-project/pull/84920
|
|
`doInitialization` in `SjLjEHPrepare` is trivial.
This is the last pass suffix with `ehprepare`.
|
|
Opaque ptr cleanup effort (NFC).
|
|
Similar to https://reviews.llvm.org/D157550
|
|
Replace this with PointerType::getUnqual().
Followup to the opaque pointer transition. Fixes an in-code TODO item.
|
|
This allows use with non-0 address space stacks. llvm_ptr_ty should
never be used. This could use some more percolation up through mlir,
but this is enough to fix existing tests.
https://reviews.llvm.org/D156666
|
|
This change initializes the members TSI, LI, DT, PSI, and ORE pointer feilds of the SelectOptimize class to nullptr.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D148303
|
|
|
|
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
|
|
Differential Revision: https://reviews.llvm.org/D139789
|
|
|
|
When inserting UnregisterFn, if there is a musttail call, we must insert before the call so that we don't break the musttail call contract.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D104807
|
|
This reverts commit f36703ada3dc18388ef5cdcbb8f39f74c27ad8e9.
Test failure: https://lab.llvm.org/buildbot#builders/104/builds/3450
|
|
When inserting UnregisterFn, if there is a musttail call, we must insert before the call so that we don't break the musttail call contract.
Differential Revision: https://reviews.llvm.org/D104807
|
|
|
|
This is D77454, except for stores. All the infrastructure work was done
for loads, so the remaining changes necessary are relatively small.
Differential Revision: https://reviews.llvm.org/D79968
|
|
Summary:
This patch extends the TargetMachine to let targets specify the integer size
used by the sjljehprepare pass. This is 64bit for the VE target and otherwise
defaults to 32bit for all targets, which was hard-wired before.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D71337
|
|
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
|
|
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Reviewed By: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69301
|
|
Modified the following 3 intrinsics:
int_addressofreturnaddress,
int_frameaddress & int_sponentry.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D64561
llvm-svn: 366679
|
|
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
|
|
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352827
|
|
This reverts commit f47d6b38c7a61d50db4566b02719de05492dcef1 (r352791).
Seems to run into compilation failures with GCC (but not clang, where
I tested it). Reverting while I investigate.
llvm-svn: 352800
|
|
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352791
|
|
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
|
|
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
|
|
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
|
|
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
|
|
swifterror llvm values model the swifterror register as memory at the
LLVM IR level. ISel will perform adhoc mem-to-reg on them. swifterror
values are constraint in how they can be used. Spilling them to memory
is not allowed.
SjLjEHPrepare tried to lower swifterror values to memory which is
unecessary since the back-end will spill and reload the register as
neccessary (as long as clobbering calls are marked as such which is the
case here) and further leads to invalid IR because swifterror values
can't be stored to memory.
rdar://38164004
llvm-svn: 327521
|
|
Summary:
Some programs run into a stack overflow issue. This change avoids this
problem by replacing the recursive algorithm with the iterative version.
Reviewers: MatzeB, t.p.northover, dblaikie
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35105
llvm-svn: 307860
|
|
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
|
|
Rename the DEBUG_TYPE to match the names of corresponding passes where
it makes sense. Also establish the pattern of simply referencing
DEBUG_TYPE instead of repeating the passname where possible.
llvm-svn: 303921
|
|
Use variadic templates instead of relying on <cstdarg> + sentinel.
This enforces better type checking and makes code more readable.
Differential Revision: https://reviews.llvm.org/D32541
llvm-svn: 302571
|
|
templates.
From a user prospective, it forces the use of an annoying nullptr to mark the end of the vararg, and there's not type checking on the arguments.
The variadic template is an obvious solution to both issues.
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299949
|
|
This reverts commit r299925 because it broke the buildbots. See e.g.
http://lab.llvm.org:8011/builders/clang-cmake-armv7-a15/builds/6008
llvm-svn: 299928
|
|
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
llvm-svn: 299925
|
|
LLVM makes several assumptions about address space 0. However,
alloca is presently constrained to always return this address space.
There's no real way to avoid using alloca, so without this
there is no way to opt out of these assumptions.
The problematic assumptions include:
- That the pointer size used for the stack is the same size as
the code size pointer, which is also the maximum sized pointer.
- That 0 is an invalid, non-dereferencable pointer value.
These are problems for AMDGPU because alloca is used to
implement the private address space, which uses a 32-bit
index as the pointer value. Other pointers are 64-bit
and behave more like LLVM's notion of generic address
space. By changing the address space used for allocas,
we can change our generic pointer type to be LLVM's generic
pointer type which does have similar properties.
llvm-svn: 299888
|
|
This reverts commit r299699, the examples needs to be updated.
llvm-svn: 299702
|
|
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
Patch by: Serge Guelton <serge.guelton@telecom-bretagne.eu>
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299699
|
|
We cannot leave the identity copies 'select true, arg, undef' that this pass
inserts for arguments to simplify handling of values on swifterror arguments.
swifterror arguments have restrictions on their uses.
rdar://30839288
llvm-svn: 297197
|
