| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
The existing analysis was already a pimpl wrapper.
I have extracted legacy pass logic to a LDVImpl wrapper named
`LiveDebugVariables` which is the analysis::Result now. This controls
whether to activate the LDV (depending on `-live-debug-variables` and
DIsubprogram) itself.
The legacy and new analysis only construct the LiveDebugVariables.
VirtRegRewriter will test this.
|
|
With this, all machine SSA optimization passes are available in the new codegen pipeline.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This patch is part of a set of patches that add an `-fextend-lifetimes`
flag to clang, which extends the lifetimes of local variables and
parameters for improved debuggability. In addition to that flag, the
patch series adds a pragma to selectively disable `-fextend-lifetimes`,
and an `-fextend-this-ptr` flag which functions as `-fextend-lifetimes`
for this pointers only. All changes and tests in these patches were
written by Wolfgang Pieb (@wolfy1961), while Stephen Tozer (@SLTozer)
has handled review and merging. The extend lifetimes flag is intended to
eventually be set on by `-Og`, as discussed in the RFC
here:
https://discourse.llvm.org/t/rfc-redefine-og-o1-and-add-a-new-level-of-og/72850
This patch implements a new intrinsic instruction in LLVM,
`llvm.fake.use` in IR and `FAKE_USE` in MIR, that takes a single operand
and has no effect other than "using" its operand, to ensure that its
operand remains live until after the fake use. This patch does not emit
fake uses anywhere; the next patch in this sequence causes them to be
emitted from the clang frontend, such that for each variable (or this) a
fake.use operand is inserted at the end of that variable's scope, using
that variable's value. This patch covers everything post-frontend, which
is largely just the basic plumbing for a new intrinsic/instruction,
along with a few steps to preserve the fake uses through optimizations
(such as moving them ahead of a tail call or translating them through
SROA).
Co-authored-by: Stephen Tozer <stephen.tozer@sony.com>
|
|
Add `TwoAddressInstructionPass`.
|
|
- Add `MachineVerifierPass`.
- Use complete `MachineVerifierPass` in `VerifyInstrumentation` if
possible.
`LiveStacksAnalysis` will be added in future, all other analyses are
done.
|
|
- Add `MachineBlockFrequencyAnalysis`.
- Add `MachineBlockFrequencyPrinterPass`.
- Use `MachineBlockFrequencyInfoWrapperPass` in legacy pass manager.
- `LazyMachineBlockFrequencyInfo::print` is empty, drop it due to new
pass manager migration.
|
|
- Add `LiveIntervalsAnalysis`.
- Add `LiveIntervalsPrinterPass`.
- Use `LiveIntervalsWrapperPass` in legacy pass manager.
- Use `std::unique_ptr` instead of raw pointer for `LICalc`, so
destructor and default move constructor can handle it correctly.
This would be the last analysis required by `PHIElimination`.
|
|
- Add `SlotIndexesAnalysis`.
- Add `SlotIndexesPrinterPass`.
- Use `SlotIndexesWrapperPass` in legacy pass.
|
|
- Port `LiveVariables` to new pass manager.
- Convert to `LiveVariablesWrapperPass` in legacy pass manager.
|
|
- Add `MachineLoopAnalysis`.
- Add `MachineLoopPrinterPass`.
- Convert to `MachineLoopInfoWrapperPass` in legacy pass manager.
|
|
result (#95113)
`MachinePostDominators` version of #94571.
|
|
result (#94571)
Prepare for new pass manager version of `MachineDominatorTreeAnalysis`.
We may need a machine dominator tree version of `DomTreeUpdater` to
handle `SplitCriticalEdge` in some CodeGen passes.
|
|
support for the ARM Architecture. (#77770)
When using Greedy Register Allocation, there are times where
early-clobber values are ignored, and assigned the same register. This
is illeagal behaviour for these intructions. To get around this, using
Pseudo instructions for early-clobber registers gives them a definition
and allows Greedy to assign them to a different register. This then
meets the ARM Architecture Reference Manual and matches the defined
behaviour.
This patch takes the existing RISC-V patch and makes it target
independent, then adds support for the ARM Architecture. Doing this will
ensure early-clobber restraints are followed when using the ARM
Architecture. Making the pass target independent will also open up
possibility that support other architectures can be added in the future.
|
|
Port the `atomicexpand` pass to the new Pass Manager.
Fixes #64559
|
|
(#77182)
Port CodeGenPrepare to new pass manager and dependency
BasicBlockSectionsProfileReader
Fixes: #75380
Co-authored-by: Krishna-13-cyber <84722531+Krishna-13-cyber@users.noreply.github.com>
|
|
CodeGenPreparePass reference in CodeGenPassBuilder (#77054)"
Revert e0c554ad87d18dcbfcb9b6485d0da800ae1338d1 "Port CodeGenPrepare to new pass manager (and BasicBlockSectionsProfil… (#75380)"
Revert #75380 and #77054 as they were breaking EXPENSIVE_CHECKS buildbots: https://lab.llvm.org/buildbot/#/builders/104
|
|
(#75380)
Port CodeGenPrepare to new pass manager and dependency
BasicBlockSectionsProfileReader
Fixes: #64560
Co-authored-by: Krishna-13-cyber <84722531+Krishna-13-cyber@users.noreply.github.com>
|
|
|
|
|
|
https://github.com/llvm/llvm-project/commit/28b912687900bc0a67cd61c374fce296b09963c4
introduced the path cloning format in the basic-block-sections profile.
This PR validates and applies path clonings.
A path cloning is valid if all of these conditions hold:
1. All bb ids in the path are mapped to existing blocks.
2. Each two consecutive bb ids in the path have a successor relationship
in the CFG.
3. The path does not include a block with indirect branches, except
possibly as the last block.
Applying a path cloning involves cloning all blocks in the path (except
the first one) and setting up their branches.
Once all clonings are applied, the cluster information is used to guide
block layout in the modified function.
|
|
The pass uses ReachingDefAnalysis which has no information about
instructions in dead blocks.
So do not process them.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D148329
|
|
Remove C APIs for interacting with PassRegistry and pass
initialization. These are legacy PM concepts, and are no longer
relevant for the new pass manager.
Calls to these initialization functions can simply be dropped.
Differential Revision: https://reviews.llvm.org/D145043
|
|
Because this pass is to be a codegen pass, it must use the legacy pass
manager.
Link: https://discourse.llvm.org/t/rfc-syncing-asm-goto-with-outputs-with-gcc/65453/8
Reviewed By: aeubanks, void
Differential Revision: https://reviews.llvm.org/D139861
|
|
With the NPM, we're now defaulting to preserving LCSSA, so a couple
of tests have changed slightly.
Differential Revision: https://reviews.llvm.org/D140982
|
|
Issue #58168 describes the difficulty diagnosing stack size issues
identified by -Wframe-larger-than. For simple code, its easy to
understand the stack layout and where space is being allocated, but in
more complex programs, where code may be heavily inlined, unrolled, and
have duplicated code paths, it is no longer easy to manually inspect the
source program and understand where stack space can be attributed.
This patch implements a machine function pass that emits remarks with a
textual representation of stack slots, and also outputs any available
debug information to map source variables to those slots.
The new behavior can be used by adding `-Rpass-analysis=stack-frame-layout`
to the compiler invocation. Like other remarks the diagnostic
information can be saved to a file in a machine readable format by
adding -fsave-optimzation-record.
Fixes: #58168
Reviewed By: nickdesaulniers, thegameg
Differential Revision: https://reviews.llvm.org/D135488
|
|
This breaks on some AArch64 bots
This reverts commit 0a652c540556a118bbd9386ed3ab7fd9e60a9754.
|
|
Issue #58168 describes the difficulty diagnosing stack size issues
identified by -Wframe-larger-than. For simple code, its easy to
understand the stack layout and where space is being allocated, but in
more complex programs, where code may be heavily inlined, unrolled, and
have duplicated code paths, it is no longer easy to manually inspect the
source program and understand where stack space can be attributed.
This patch implements a machine function pass that emits remarks with a
textual representation of stack slots, and also outputs any available
debug information to map source variables to those slots.
The new behavior can be used by adding `-Rpass-analysis=stack-frame-layout`
to the compiler invocation. Like other remarks the diagnostic
information can be saved to a file in a machine readable format by
adding -fsave-optimzation-record.
Fixes: #58168
Reviewed By: nickdesaulniers, thegameg
Differential Revision: https://reviews.llvm.org/D135488
|
|
Differential Revision: https://reviews.llvm.org/D140893
|
|
Uniformity analysis is a generalization of divergence analysis to
include irreducible control flow:
1. The proposed spec presents a notion of "maximal convergence" that
captures the existing convention of converging threads at the
headers of natual loops.
2. Maximal convergence is then extended to irreducible cycles. The
identity of irreducible cycles is determined by the choices made
in a depth-first traversal of the control flow graph. Uniformity
analysis uses criteria that depend only on closed paths and not
cycles, to determine maximal convergence. This makes it a
conservative analysis that is independent of the effect of DFS on
CycleInfo.
3. The analysis is implemented as a template that can be
instantiated for both LLVM IR and Machine IR.
Validation:
- passes existing tests for divergence analysis
- passes new tests with irreducible control flow
- passes equivalent tests in MIR and GMIR
Based on concepts originally outlined by
Nicolai Haehnle <nicolai.haehnle@amd.com>
With contributions from Ruiling Song <ruiling.song@amd.com> and
Jay Foad <jay.foad@amd.com>.
Support for GMIR and lit tests for GMIR/MIR added by
Yashwant Singh <yashwant.singh@amd.com>.
Differential Revision: https://reviews.llvm.org/D130746
|
|
The Assignment Tracking debug-info feature is outlined in this RFC:
https://discourse.llvm.org/t/
rfc-assignment-tracking-a-better-way-of-specifying-variable-locations-in-ir
Add initial revision of assignment tracking analysis pass
---------------------------------------------------------
This patch squashes five individually reviewed patches into one:
#1 https://reviews.llvm.org/D136320
#2 https://reviews.llvm.org/D136321
#3 https://reviews.llvm.org/D136325
#4 https://reviews.llvm.org/D136331
#5 https://reviews.llvm.org/D136335
Patch #1 introduces 2 new files: AssignmentTrackingAnalysis.h and .cpp. The
two subsequent patches modify those files only. Patch #4 plumbs the analysis
into SelectionDAG, and patch #5 is a collection of tests for the analysis as
a whole.
The analysis was broken up into smaller chunks for review purposes but for the
most part the tests were written using the whole analysis. It would be possible
to break up the tests for patches #1 through #3 for the purpose of landing the
patches seperately. However, most them would require an update for each
patch. In addition, patch #4 - which connects the analysis to SelectionDAG - is
required by all of the tests.
If there is build-bot trouble, we might try a different landing sequence.
Analysis problem and goal
-------------------------
Variables values can be stored in memory, or available as SSA values, or both.
Using the Assignment Tracking metadata, it's not possible to determine a
variable location just by looking at a debug intrinsic in
isolation. Instructions without any metadata can change the location of a
variable. The meaning of dbg.assign intrinsics changes depending on whether
there are linked instructions, and where they are relative to those
instructions. So we need to analyse the IR and convert the embedded information
into a form that SelectionDAG can consume to produce debug variable locations
in MIR.
The solution is a dataflow analysis which, aiming to maximise the memory
location coverage for variables, outputs a mapping of instruction positions to
variable location definitions.
API usage
---------
The analysis is named `AssignmentTrackingAnalysis`. It is added as a required
pass for SelectionDAGISel when assignment tracking is enabled.
The results of the analysis are exposed via `getResults` using the returned
`const FunctionVarLocs *`'s const methods:
const VarLocInfo *single_locs_begin() const;
const VarLocInfo *single_locs_end() const;
const VarLocInfo *locs_begin(const Instruction *Before) const;
const VarLocInfo *locs_end(const Instruction *Before) const;
void print(raw_ostream &OS, const Function &Fn) const;
Debug intrinsics can be ignored after running the analysis. Instead, variable
location definitions that occur between an instruction `Inst` and its
predecessor (or block start) can be found by looping over the range:
locs_begin(Inst), locs_end(Inst)
Similarly, variables with a memory location that is valid for their lifetime
can be iterated over using the range:
single_locs_begin(), single_locs_end()
Further detail
--------------
For an explanation of the dataflow implementation and the integration with
SelectionDAG, please see the reviews linked at the top of this commit message.
Reviewed By: jmorse
|
|
This reverts commit 122efef8ee9be57055d204d52c38700fe933c033.
- Patch fixed to not reuse definitions from predecessors in EH landing pads.
- Late review suggestions (by MaskRay) have been addressed.
- M68k/pipeline.ll test updated.
- Init captures added in processBlock() to avoid capturing structured bindings.
- RISCV has this disabled for now.
Original commit message:
A new pass MachineLateInstrsCleanup is added to be run after PEI.
This is a simple pass that removes redundant and identical instructions
whenever found by scanning the MF once while keeping track of register
definitions in a map. These instructions are typically immediate loads
resulting from rematerialization, and address loads emitted by target in
eliminateFrameInde().
This is enabled by default, but a target could easily disable it by means of
'disablePass(&MachineLateInstrsCleanupID);'.
This late cleanup is naturally not "optimal" in removing instructions as it
is done by looking at phys-regs, but still quite effective. It would be
desirable to improve other parts of CodeGen and avoid these redundant
instructions in the first place, but there are no ideas for this yet.
Differential Revision: https://reviews.llvm.org/D123394
Reviewed By: RKSimon, foad, craig.topper, arsenm, asb
|
|
Currently per-function metadata consists of:
(start-pc, size, features)
This adds a new UAR feature and if it's set an additional element:
(start-pc, size, features, stack-args-size)
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D136078
|
|
definitions.""
This reverts commit 17db0de330f943833296ae72e26fa988bba39cb3.
Some more bots got broken - need to investigate.
|
|
Init captures added in processBlock() to avoid capturing structured bindings,
which caused the build problems (with clang).
RISCV has this disabled for now until problems relating to post RA pseudo
expansions are resolved.
|
|
Temporarily revert and fix buildbot failure.
This reverts commit 6d12599fd4134c1da63198c74a25490d28c733f6.
|
|
A new pass MachineLateInstrsCleanup is added to be run after PEI.
This is a simple pass that removes redundant and identical instructions
whenever found by scanning the MF once while keeping track of register
definitions in a map. These instructions are typically immediate loads
resulting from rematerialization, and address loads emitted by target in
eliminateFrameInde().
This is enabled by default, but a target could easily disable it by means of
'disablePass(&MachineLateInstrsCleanupID);'.
This late cleanup is naturally not "optimal" in removing instructions as it
is done by looking at phys-regs, but still quite effective. It would be
desirable to improve other parts of CodeGen and avoid these redundant
instructions in the first place, but there are no ideas for this yet.
Differential Revision: https://reviews.llvm.org/D123394
Reviewed By: RKSimon, foad, craig.topper, arsenm, asb
|
|
As stated in
https://discourse.llvm.org/t/rfc-llc-add-expandlargeintfpconvert-pass-for-fp-int-conversion-of-large-bitint/65528,
this implementation is very similar to ExpandLargeDivRem, which expands
‘fptoui .. to’, ‘fptosi .. to’, ‘uitofp .. to’, ‘sitofp .. to’ instructions
with a bitwidth above a threshold into auto-generated functions. This is
useful for targets like x86_64 that cannot lower fp convertions with more
than 128 bits. The expanded nodes are referring from the IR generated by
`compiler-rt/lib/builtins/floattidf.c`, `compiler-rt/lib/builtins/fixdfti.c`,
and etc.
Corner cases:
1. For fp16: as there is no related builtins added in compliler-rt. So I
mainly utilized the fp32 <-> fp16 lib calls to implement.
2. For fp80: as this pass is soft fp emulation and no fp80 instructions can
help in this problem. I recommend users to deprecate this usage. For now, the
implementation uses fp128 as the temporary conversion type and inserts
fptrunc/ext at top/end of the function.
3. For bf16: as clang FE currently doesn't support bf16 algorithm operations
(convert to int, float, +, -, *, ...), this patch doesn't consider bf16 for
now.
4. For unsigned FPToI: since both default hardware behaviors and libgcc are
ignoring "returns 0 for negative input" spec. This pass follows this old way
to ignore unsigned FPToI. See this example:
https://gcc.godbolt.org/z/bnv3jqW1M
The end-to-end tests are uploaded at https://reviews.llvm.org/D138261
Reviewed By: LuoYuanke, mgehre-amd
Differential Revision: https://reviews.llvm.org/D137241
|
|
This reverts commit d3c851d3fc8b69dda70bf5f999c5b39dc314dd73.
Some bots broke:
- https://luci-milo.appspot.com/ui/p/fuchsia/builders/toolchain.ci/clang-linux-x64/b8796062278266465473/overview
- https://lab.llvm.org/buildbot/#/builders/124/builds/5759/steps/7/logs/stdio
|
|
Currently per-function metadata consists of:
(start-pc, size, features)
This adds a new UAR feature and if it's set an additional element:
(start-pc, size, features, stack-args-size)
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D136078
|
|
This reverts commit e6aea4a5db09c845276ece92737a6aac97794100.
Broke tests:
https://lab.llvm.org/buildbot/#/builders/16/builds/38992
|
|
Currently per-function metadata consists of:
(start-pc, size, features)
This adds a new UAR feature and if it's set an additional element:
(start-pc, size, features, stack-args-size)
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D136078
|
