| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This PR starts using the correct VFS in `GCOVProfilerPass` instead of
using the real FS directly. This matches compiler's behavior for other
input files.
|
|
This PR loads the path from `-fembed-offload-object=<path>` through the
VFS rather than going straight to the real file system. This matches the
behavior of other input files of the compiler. This technically changes
behavior in that `-fembed-offload-object=-` no longer loads the file
from stdin, but I don't think that was the intention of the original
code anyways.
|
|
This PR loads the path from `-fbasic-block-sections=list=<path>` through
the VFS rather than going straight to the real file system. This matches
the behavior of other input files of the compiler.
|
|
Some LLVM passes need access to the filesystem to read configuration
files and similar. In some places, this is achieved by grabbing the VFS
from `PGOOptions`, but some passes don't have access to these and resort
to just calling `vfs::getRealFileSystem()`. This PR allows setting the
VFS directly on `PassBuilder` that's able to pass it down to all passes
that need it.
|
|
Currently there are two serialization modes for bitstream Remarks:
standalone and separate. The separate mode splits remark metadata (e.g.
the string table) from actual remark data. The metadata is written into
the object file by the AsmPrinter, while the remark data is stored in a
separate remarks file. This means we can't use bitstream remarks with
tools like opt that don't generate an object file. Also, it is confusing
to post-process bitstream remarks files, because only the standalone
files can be read by llvm-remarkutil. We always need to use dsymutil
to convert the separate files to standalone files, which only works for
MachO. It is not possible for clang/opt to directly emit bitstream
remark files in standalone mode, because the string table can only be
serialized after all remarks were emitted.
Therefore, this change completely removes the separate serialization
mode. Instead, the remark string table is now always written to the end
of the remarks file. This requires us to tell the serializer when to
finalize remark serialization. This automatically happens when the
serializer goes out of scope. However, often the remark file goes out of
scope before the serializer is destroyed. To diagnose this, I have added
an assert to alert users that they need to explicitly call
finalizeLLVMOptimizationRemarks.
This change paves the way for further improvements to the remark
infrastructure, including more tooling (e.g. #159784), size optimizations
for bitstream remarks, and more.
Pull Request: https://github.com/llvm/llvm-project/pull/156715
|
|
This PR passes the VFS down to `llvm::cl` functions so that they don't
assume the real file system.
|
|
This PR is a reapplication of
https://github.com/llvm/llvm-project/pull/142686
|
|
(#158764)
This reverts commit 895cda70a95529fd22aac05eee7c34f7624996af.
And fix attempt: 06f671e57a574ba1c5127038eff8e8773273790e.
Performance regressions and broken sanitizers, see #142686.
|
|
This patch adds the flag -fexperimental-loop-fuse to the clang and flang
drivers. This is primarily useful for experiments as we envision to
enable the pass one day.
The options are based on the same principles and reason on which we have
`floop-interchange`.
---------
Co-authored-by: Madhur Amilkanthwar <madhura@nvidia.com>
|
|
Remove "approx-func-fp-math" attribute and related command line option,
users should always use afn flag in IR.
Resolve FIXME in `TargetMachine::resetTargetOptions` partially.
|
|
ObjCARCAPElimPass has been made obsolete now that we remove unused
autorelease pools.
|
|
(#148982)
This PR removes the command line parsing workaround introduced in
https://github.com/llvm/llvm-project/pull/146342 by moving
`LangOptions::ExceptionHandling` to `CodeGenOptions` that get parsed
even for IR input. Additionally, this improves layering, where the
codegen library now checks `CodeGenOptions` instead of `LangOptions` for
exception handling. (This got enabled by
https://github.com/llvm/llvm-project/pull/146422.)
|
|
In a previous commit, the llvm-config-defined macro
LLVM_ENABLE_DEBUGLOC_COVERAGE_TRACKING was renamed to
LLVM_ENABLE_DEBUGLOC_TRACKING_COVERAGE. One instance of this in Clang
remains unchanged; this patch renames it, and adds an explicit
llvm-config inclusion to ensure the define doesn't silently get removed.
NFC outside of coverage tracking builds, which we do not currently test.
|
|
Co-authored-by: Kazu Hirata <kazu@google.com>
|
|
## Purpose
This patch is one in a series of code-mods that annotate LLVM’s public
interface for export. This patch ensures a few `cl::opt` declarations
are properly annotated with `LLVM_ABI`. The annotations currently have
no meaningful impact on the LLVM build; however, they are a prerequisite
to support an LLVM Windows DLL (shared library) build.
## Background
This effort is tracked in #109483. Additional context is provided in
[this
discourse](https://discourse.llvm.org/t/psa-annotating-llvm-public-interface/85307),
and documentation for `LLVM_ABI` and related annotations is found in the
LLVM repo
[here](https://github.com/llvm/llvm-project/blob/main/llvm/docs/InterfaceExportAnnotations.rst).
## Overview
- Remove local `extern` declarations of `llvm::PrintPipelinePasses`
because it is already correctly declared with an `LLVM_ABI` annotation
in `llvm\Passes\PassBuilder.h`. Leaving these declarations results in a
gcc compile warning unless they are also annotated with `LLVM_ABI`.
- Similarly, remove local `extern` declarations of
`ProfileSummaryCutoffHot` and `UseContextLessSummary` from
`llvm/tools/llvm-profgen/ProfileGenerator.cpp` since they are declared
with `LLVM_ABI` in `llvm\ProfileData\ProfileCommon.h`.
- Explicitly annotate the extern declaration of `ProfileCorrelate` in
`clang/lib/CodeGen/BackendUtil.cpp` since it is not declared in a
header. The definition of `ProfileCorrelate` in
`llvm\lib\Transforms\Instrumentation\InstrProfiling.cpp` is already
annotated with `LLVM_ABI`.
## Validation
Local builds and tests to validate cross-platform compatibility. This
included llvm, clang, and lldb on the following configurations:
- Windows with MSVC
- Windows with Clang
- Linux with GCC
- Linux with Clang
- Darwin with Clang
|
|
This PR resubmits the changes from #136098, which was previously
reverted due to a build failure during the linking stage:
```
undefined reference to `llvm::DebugInfoCorrelate'
undefined reference to `llvm::ProfileCorrelate'
```
The root cause was that `llvm/lib/Frontend/Driver/CodeGenOptions.cpp`
references symbols from the `Instrumentation` component, but the
`LINK_COMPONENTS` in the `llvm/lib/Frontend/CMakeLists.txt` for
`LLVMFrontendDriver` did not include it. As a result, linking failed in
configurations where these components were not transitively linked.
### Fix:
This updated patch explicitly adds `Instrumentation` to
`LINK_COMPONENTS` in the relevant `llvm/lib/Frontend/CMakeLists.txt`
file to ensure the required symbols are properly resolved.
---------
Co-authored-by: ict-ql <168183727+ict-ql@users.noreply.github.com>
Co-authored-by: Chyaka <52224511+liliumshade@users.noreply.github.com>
Co-authored-by: Tarun Prabhu <tarunprabhu@gmail.com>
|
|
thin-lto (#129736)
When using `-fcs-generate-profile` with distributed thin-lto in the same
fashion we do for local thin-lto, we hit the following assertion:
https://github.com/llvm/llvm-project/blob/6041c745f32e8fd60ed24e29e7d919d8d1c87ca6/llvm/lib/Support/PGOOptions.cpp#L36
Using local thin-lto with LLD for MachO, we set the missing path
automatically to a default value: https://reviews.llvm.org/D151589. In
this fix we add the same behavior.
---------
Co-authored-by: Nuri Amari <nuriamari@fb.com>
|
|
Most of the recent development on the MemProfiler has been on the Use part. The instrumentation has been quite stable for a while. As the complexity of the use grows (with undrifting, diagnostics etc) I figured it would be good to separate these two implementations.
|
|
compiler" (#142159)
Reverts llvm/llvm-project#136098
|
|
(#136098)
This patch implements IR-based Profile-Guided Optimization support in
Flang through the following flags:
- `-fprofile-generate` for instrumentation-based profile generation
- `-fprofile-use=<dir>/file` for profile-guided optimization
Resolves #74216 (implements IR PGO support phase)
**Key changes:**
- Frontend flag handling aligned with Clang/GCC semantics
- Instrumentation hooks into LLVM PGO infrastructure
- LIT tests verifying:
- Instrumentation metadata generation
- Profile loading from specified path
- Branch weight attribution (IR checks)
**Tests:**
- Added gcc-flag-compatibility.f90 test module verifying:
- Flag parsing boundary conditions
- IR-level profile annotation consistency
- Profile input path normalization rules
- SPEC2006 benchmark results will be shared in comments
For details on LLVM's PGO framework, refer to [Clang PGO
Documentation](https://clang.llvm.org/docs/UsersManual.html#profile-guided-optimization).
This implementation was developed by [XSCC Compiler
Team](https://github.com/orgs/OpenXiangShan/teams/xscc).
---------
Co-authored-by: ict-ql <168183727+ict-ql@users.noreply.github.com>
Co-authored-by: Tom Eccles <t@freedommail.info>
|
|
These are identified by misc-include-cleaner. I've filtered out those
that break builds. Also, I'm staying away from llvm-config.h,
config.h, and Compiler.h, which likely cause platform- or
compiler-specific build failures.
|
|
Normally -fsanitize-coverage=stack-depth inserts inline arithmetic to
update thread_local __sancov_lowest_stack. To support stack depth
tracking in the Linux kernel, which does not implement traditional
thread_local storage, provide the option to call a function instead.
This matches the existing "stackleak" implementation that is supported
in Linux via a GCC plugin. To make this coverage more performant, a
minimum estimated stack depth can be chosen to enable the callback mode,
skipping instrumentation of functions with smaller stacks.
With -fsanitize-coverage-stack-depth-callback-min set greater than 0,
the __sanitize_cov_stack_depth() callback will be injected when the
estimated stack depth is greater than or equal to the given minimum.
|
|
Reapplied after fixing the config issue that was causing issues following
the previous merge.
This reverts commit fdbf073a86573c9ac4d595fac8e06d252ce1469f.
|
|
This reduces the size of the clang/unittests build directory by 64% and
my overall build dir size by 5%. Static linking is the real driving
factor here, but even if the default build configuration used shared
libraries, I don't see why we should be building so many unit test
binaries.
To make the project more approachable for new contributors, I'm
attempting to make the build a bit less resource-intensive. Build
directory size is a common complaint, and this is low-hanging fruit.
I've noticed that incremental builds leave behind the old, stale gtest binaries, and lit will keep running them. This mostly doesn't matter unless they use shared libraries, which will eventually stop working after successive builds. You can clean up the old test binaries with this command in the build directory:
$ find tools/clang/unittests/ -iname '*Tests' -type f | xargs rm
... or you can simply clean the build directory in a more holistic way.
---------
Co-authored-by: Petr Hosek <phosek@google.com>
|
|
This reverts commit a9d93ecf1f8d2cfe3f77851e0df179b386cff353.
Reverted due to the commit including a config in LLVM headers that is not
available outside of the llvm source tree.
|
|
This is part of a series of patches that tries to improve DILocation bug
detection in Debugify; see the review for more details. This is the patch
that adds the main feature, adding a set of `DebugLoc::get<Kind>`
functions that can be used for instructions with intentionally empty
DebugLocs to prevent Debugify from treating them as bugs, removing the
currently-pervasive false positives and allowing us to use Debugify (in
its original DI preservation mode) to reliably detect existing bugs and
regressions. This patch does not add uses of these functions, except for
once in Clang before optimizations, and in
`Instruction::dropLocation()`, since that is an obvious case that
immediately removes a set of false positives.
|
|
The `hipstdpar` specific passes were not ordered ideally, especially for
`fgpu-rdc` compilations, which meant that we'd eagerly run accelerator
code selection and remove symbols that might end up used. This change
corrects that aspect by ensuring that accelerator code selection is only
done after linking (this will have to be revisited in the future once
the closed-world assumption no longer holds). Furthermore, we take the
opportunity to move allocation interposition so that it properly gets
printed when print-pipeline-passes is requested. NFC.
|
|
This avoids doing a Triple -> std::string -> Triple round trip in lots
of places, now that the Module stores a Triple.
|
|
The module currently stores the target triple as a string. This means
that any code that wants to actually use the triple first has to
instantiate a Triple, which is somewhat expensive. The change in #121652
caused a moderate compile-time regression due to this. While it would be
easy enough to work around, I think that architecturally, it makes more
sense to store the parsed Triple in the module, so that it can always be
directly queried.
For this change, I've opted not to add any magic conversions between
std::string and Triple for backwards-compatibilty purses, and instead
write out needed Triple()s or str()s explicitly. This is because I think
a decent number of them should be changed to work on Triple as well, to
avoid unnecessary conversions back and forth.
The only interesting part in this patch is that the default triple is
Triple("") instead of Triple() to preserve existing behavior. The former
defaults to using the ELF object format instead of unknown object
format. We should fix that as well.
|
|
instrumentation profiling mode (#124353)
In Continuous instrumentation profiling mode, profile or coverage data
collected via compiler instrumentation is continuously synced to the
profile file. This feature has existed for a while, and is documented
here:
https://clang.llvm.org/docs/SourceBasedCodeCoverage.html#running-the-instrumented-program
This PR creates a user facing option to enable the feature.
---------
Co-authored-by: Wael Yehia <wyehia@ca.ibm.com>
|
|
This introduces options `-floop-interchange` and `-fno-loop-interchange`
to enable/disable the loop-interchange pass. This is part of the work
that tries to get that pass enabled by default (#124911), where it was
remarked that a user facing option to control this would be convenient
to have. The option name is the same as GCC's.
|
|
LowerAllowCheckPass<cutoffs>" (#125032) (#125037)
This reverts commit 928cad49beec0120686478f502899222e836b545 i.e.,
relands dccd27112722109d2e2f03e8da9ce8690f06e11b, with a fix to avoid
use-after-scope by changing the lambda to capture by value.
|
|
LowerAllowCheckPass<cutoffs>" (#125032)
Reverts llvm/llvm-project#124857 due to buildbot breakage
(https://lab.llvm.org/buildbot/#/builders/46/builds/11310)
|
|
(#124857)
This adds the plumbing between -fsanitize-skip-hot-cutoff (introduced in
https://github.com/llvm/llvm-project/pull/121619) and
LowerAllowCheckPass<cutoffs> (introduced in
https://github.com/llvm/llvm-project/pull/124211).
The net effect is that -fsanitize-skip-hot-cutoff now combines the
functionality of -ubsan-guard-checks and
-lower-allow-check-percentile-cutoff (though this patch does not remove
those yet), and generalizes the latter to allow per-sanitizer cutoffs.
Note: this patch replaces Intrinsic::allow_ubsan_check's
SanitizerHandler parameter with SanitizerOrdinal; this is necessary
because the hot cutoffs are specified in terms of SanitizerOrdinal
(e.g., null, alignment), not SanitizerHandler (e.g., TypeMismatch).
Likewise, CodeGenFunction::EmitCheck is changed to emit
allow_ubsan_check() for each individual check.
---------
Co-authored-by: Vitaly Buka <vitalybuka@gmail.com>
Co-authored-by: Vitaly Buka <vitalybuka@google.com>
|
|
With the changes in 48d0eb518, the CodeGenOptions used to emit .pcm
files with -fmodule-format=obj (-gmodules) were the ones from the
original invocation, rather than the ones specifically crafted for
outputting the pcm. This was causing the pcm to be written with only the
debug info and without the __clangast section in some cases (e.g. -O2).
This unforunately was not covered by existing tests, because compiling
and loading a module within a single compilation load the ast content
from the in-memory module cache rather than reading it from the pcm file
that was written. This broke bootstrapping a build of clang with modules
enabled on Darwin.
rdar://143418834
|
|
(#122833) (#122994)
This reverts commit 1515caf7a59dc20cb932b724b2ef5c1d1a593427
(https://github.com/llvm/llvm-project/pull/122833) i.e., relands
7d8b4eb0ead277f41ff69525ed807f9f6e227f37
(https://github.com/llvm/llvm-project/pull/122765), with LowerAllowCheckPass::Options moved inside the callback to fix a stack use-after-scope error.
---------
Co-authored-by: Vitaly Buka <vitalybuka@gmail.com>
|
|
|
|
(#122833)
Reverts llvm/llvm-project#122765
Reason: buildbot breakage
(https://lab.llvm.org/buildbot/#/builders/46/builds/10393)
```
z:\b\llvm-clang-x86_64-sie-win\build\bin\clang.exe -cc1 -internal-isystem Z:\b\llvm-clang-x86_64-sie-win\build\lib\clang\20\include -nostdsysteminc -triple x86_64-pc-linux-gnu -emit-llvm -o - Z:\b\llvm-clang-x86_64-sie-win\llvm-project\clang\test\CodeGen\allow-ubsan-check-inline.c -fsanitize=signed-integer-overflow -mllvm -ubsan-guard-checks -O3 -mllvm -lower-allow-check-random-rate=1 -Rpass=lower-allow-check -Rpass-missed=lower-allow-check -fno-inline 2>&1 | z:\b\llvm-clang-x86_64-sie-win\build\bin\filecheck.exe Z:\b\llvm-clang-x86_64-sie-win\llvm-project\clang\test\CodeGen\allow-ubsan-check-inline.c --check-prefixes=NOINL --implicit-check-not="remark:"
# executed command: 'z:\b\llvm-clang-x86_64-sie-win\build\bin\clang.exe' -cc1 -internal-isystem 'Z:\b\llvm-clang-x86_64-sie-win\build\lib\clang\20\include' -nostdsysteminc -triple x86_64-pc-linux-gnu -emit-llvm -o - 'Z:\b\llvm-clang-x86_64-sie-win\llvm-project\clang\test\CodeGen\allow-ubsan-check-inline.c' -fsanitize=signed-integer-overflow -mllvm -ubsan-guard-checks -O3 -mllvm -lower-allow-check-random-rate=1 -Rpass=lower-allow-check -Rpass-missed=lower-allow-check -fno-inline
# note: command had no output on stdout or stderr
# error: command failed with exit status: 0xc0000409
# executed command: 'z:\b\llvm-clang-x86_64-sie-win\build\bin\filecheck.exe' 'Z:\b\llvm-clang-x86_64-sie-win\llvm-project\clang\test\CodeGen\allow-ubsan-check-inline.c' --check-prefixes=NOINL --implicit-check-not=remark:
# .---command stderr------------
# | FileCheck error: '<stdin>' is empty.
# | FileCheck command line: z:\b\llvm-clang-x86_64-sie-win\build\bin\filecheck.exe Z:\b\llvm-clang-x86_64-sie-win\llvm-project\clang\test\CodeGen\allow-ubsan-check-inline.c --check-prefixes=NOINL --implicit-check-not=remark:
# `-----------------------------
# error: command failed with exit status: 2
```
|
|
This is glue code to convert LowerAllowCheckPass from a FUNCTION_PASS to
FUNCTION_PASS_WITH_PARAMS. The parameters are currently unused.
Future work will plumb `-fsanitize-skip-hot-cutoff` (introduced in
https://github.com/llvm/llvm-project/pull/121619) to
LowerAllowCheckOptions.
|
|
|
|
The code generation time is unclear in the -ftime-report output:
* The two clang timers "Code Generation Time" and "LLVM IR Generation
Time" are in the default group "Miscellaneous Ungrouped Timers".
* There is also a "Clang front-end time" group, which actually includes
code generation time.
```
===-------------------------------------------------------------------------===
Miscellaneous Ungrouped Timers
===-------------------------------------------------------------------------===
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
0.0611 ( 1.7%) 0.0099 ( 4.4%) 0.0710 ( 1.9%) 0.0713 ( 1.9%) LLVM IR Generation Time
3.5140 ( 98.3%) 0.2165 ( 95.6%) 3.7306 ( 98.1%) 3.7342 ( 98.1%) Code Generation Time
3.5751 (100.0%) 0.2265 (100.0%) 3.8016 (100.0%) 3.8055 (100.0%) Total
...
===-------------------------------------------------------------------------===
Clang front-end time report
===-------------------------------------------------------------------------===
Total Execution Time: 3.9108 seconds (3.9146 wall clock)
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
3.6802 (100.0%) 0.2306 (100.0%) 3.9108 (100.0%) 3.9146 (100.0%) Clang front-end timer
3.6802 (100.0%) 0.2306 (100.0%) 3.9108 (100.0%) 3.9146 (100.0%) Total
```
This patch
* renames "Clang front-end time report" (FrontendAction time) to "Clang
time report",
* renames "Clang front-end" to "Front end",
* moves "LLVM IR Generation" into the group,
* replaces "Code Generation time" with "Optimizer" (middle end) and
"Machine code generation" (back end).
```
% clang -c sqlite3.i -w -ftime-report -mllvm -sort-timers=0
...
===-------------------------------------------------------------------------===
Clang time report
===-------------------------------------------------------------------------===
Total Execution Time: 1.5922 seconds (1.5972 wall clock)
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
0.5107 ( 35.9%) 0.0105 ( 6.2%) 0.5211 ( 32.7%) 0.5222 ( 32.7%) Front end
0.2464 ( 17.3%) 0.0340 ( 20.0%) 0.2804 ( 17.6%) 0.2814 ( 17.6%) LLVM IR generation
0.6240 ( 43.9%) 0.1235 ( 72.7%) 0.7475 ( 47.0%) 0.7503 ( 47.0%) Machine code generation
0.0413 ( 2.9%) 0.0018 ( 1.0%) 0.0431 ( 2.7%) 0.0433 ( 2.7%) Optimizer
1.4224 (100.0%) 0.1698 (100.0%) 1.5922 (100.0%) 1.5972 (100.0%) Total
```
Pull Request: https://github.com/llvm/llvm-project/pull/122225
|
|
Fixes 48d0eb5181065a3d086de2e30f5c619fe407e4ce
|
|
Prepare for -ftime-report change (#122225).
|
|
|
|
Remove ReportingMode and ReportingOpts.
|
|
As mentioned in https://github.com/llvm/llvm-project/pull/118989, all
sanitizers but tsan are converted to just module pass for easier
maintenance.
This patch removes the TySan function pass, convert TySan from
function+module pass to just module pass.
|
|
-fno-sanitize-merge=local-bounds) (#120682)
#120613 removed -ubsan-unique-traps and replaced it with
-fno-sanitize-merge (introduced in #120511), which allows fine-grained
control of which UBSan checks to prevent merging. This analogous patch
removes -bound-checking-unique-traps, and allows it to be controlled via
-fno-sanitize-merge=local-bounds.
Most of this patch is simply plumbing through the compiler flags into
the bounds checking pass.
Note: this patch subtly changes -fsanitize-merge (the default) to also
include -fsanitize-merge=local-bounds. This is different from the
previous behavior, where -fsanitize-merge (or the old
-ubsan-unique-traps) did not affect local-bounds (requiring the separate
-bounds-checking-unique-traps). However, we argue that the new behavior
is more intuitive.
Removing -bounds-checking-unique-traps and merging its functionality
into -fsanitize-merge breaks backwards compatibility; we hope that this
is acceptable since '-mllvm -bounds-checking-unique-traps' was an
experimental flag.
|
|
Implements ``-f[no-]sanitize-trap=local-bounds``,
and ``-f[no-]sanitize-recover=local-bounds``.
LLVM part is here #120513.
|
|
This check is a part of UBSAN, but does not support
verbose output like other UBSAN checks.
This is a step to fix that.
|
|
This patch introduces the Clang components of type sanitizer: a
sanitizer for type-based aliasing violations.
It is based on Hal Finkel's https://reviews.llvm.org/D32198.
The Clang changes are mostly formulaic, the one specific change being
that when the TBAA sanitizer is enabled, TBAA is always generated, even
at -O0.
It goes together with the corresponding LLVM changes
(https://github.com/llvm/llvm-project/pull/76259) and compiler-rt
changes (https://github.com/llvm/llvm-project/pull/76261)
PR: https://github.com/llvm/llvm-project/pull/76260
|
