Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
|
|
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
|
|
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
|
|
The new test driver in <support/test-driver.c> has feature parity with
the old one. The main difference is that its hooking mechanism is
based on functions and function pointers instead of macros. This
commit also implements a new environment variable, TEST_COREDUMPS,
which disables the code which disables coredumps (that is, it enables
them if the invocation environment has not disabled them).
<test-skeleton.c> defines wrapper functions so that it is possible to
use existing macros with the new-style hook functionality.
This commit changes only a few test cases to the new test driver, to
make sure that it works as expected.
|
|
* libio/libio.h: Use __USE_GNU, not _GNU_SOURCE, in a conditional.
* test-skeleton.c: Include stdint.h to ensure uintptr_t is available.
|
|
* test-skeleton.c: Document do_test usage.
|
|
This patch consolidates all the fallocate{64} implementation for Linux
in only one (sysdeps/unix/sysv/linux/fallocate{64}.c). It also removes the
syscall from the auto-generation using assembly macros.
The new macro SYSCALL_LL{64} is used to handle the offset argument.
Checked on x86_64, x32, i386, aarch64, and ppc64le.
* sysdeps/unix/sysv/linux/Makefile (test): Add tst-fallocate and
tst-fallocate64.
* sysdeps/unix/sysv/linux/tst-fallocate.c: New file.
* sysdeps/unix/sysv/linux/tst-fallocate64.c: Likewise.
* sysdeps/unix/sysv/linux/tst-fallocate-common.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate.c: Remove file.
* sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/fallocate.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/fallocate64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/fallocate.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/fallocate64.c: Likewise.
* sysdeps/unix/sysv/linux/fallocate.c (fallocate): Use SYSCALL_LL
macro on offset argument.
* sysdeps/unix/sysv/linux/fallocate64.c (fallocate64): Use
SYSCALL_LL64 on offset argument.
* test-skeleton.c (FAIL_RET): Add macro.
(FAIL_EXIT): Likewise.
(FAIL_EXIT1): Likewise.
(_FAIL): Likewise.
|
|
|
|
Also put xasprintf into test-skeleton.c (written in such a way that
including <stdarg.h> is not needed).
|
|
ISO C forbids empty initializer braces (6.7.9 initializer-list must
contain at least one initializer). However GCC allows it, generating
a warning depending of the version.
With GCC 4.8 on ARM I noticed tst-initializers1.c fails to build with:
In file included from tst-initializers1.c:60:0:
../test-skeleton.c: In function 'delayed_exit_thread':
../test-skeleton.c:687:10: error: missing initializer for field 'tv_sec' of 'struct timespec' [-Werror=missing-field-initializers]
struct timespec remaining = {}
While with GCC 5.1 the same warning is just spilled with -pedantic.
To be safe this patch just zero initialize the struct as expected.
Tested on armhf.
* test-skeleton.c (delayed_exit_thread): Add initializer on struct
timespec C99 designated initialization.
|
|
Before this change, several tests did not detect early deadlocks
because they used SIGALRM as the expected signal, and they ran
for the full default TIMEOUT seconds.
This commit adds a new delayed_exit function to the test skeleton,
along with several error-checking wrappers to pthread functions.
Additional error checking is introduced into several tests.
|
|
The compiled tests no longer refer to the mallopt symbol
from their main functions. (Some tests still call mallopt
explicitly, which is fine.)
|
|
If the requested size is zero, realloc returns NULL, but the
deallocation is still successful, unless the pointer is also
NULL, when realloc behaves as malloc (0).
|
|
__attribute__ ((used)) means that the function has to be
emitted in assembly because it is referenced in ways the
compiler cannot detect (such as asm statements, or some
post-processing on the generated assembly).
The unused attribute needs to come first, otherwise it is
applied to the return type and not the function definition.
|
|
|
|
* test-skeleton.c (oom_error, xmalloc, xcalloc, xrealloc):
New functions.
(add_temp_file): Use them.
|
|
With older kernels, it is mostly ineffective because it causes malloc
to switch from sbrk to mmap (potentially invalidating malloc testing
compared to what real appliations do). With newer kernels which
have switched to enforcing RLIMIT_DATA for mmap as well, some test
cases will fail in an unintended fashion because the limit which was
set previously does not include room for all mmap mappings.
|
|
The vast majority of timeouts I've seen w/glibc tests are due to:
- slow system (e.g. <1 GHz cpu)
- loaded system (e.g. lots of parallelism)
Even then, I've seen timeouts on system I don't generally consider
slow, or even loaded, and considering TIMEOUT is set to <=10 in ~60
tests (and <=20 in ~75 tests), it seems I'm not alone. I've just
gotten in the habit of doing `export TIMEOUTFACTOR=10` on all my
setups.
In the edge case where there is a bug in the test and the timeout is
hit, I think we all agree that's either a problem with the test or a
real bug in the library somewhere. In either case, the incident rate
should be low, so catering to that seems like the wrong trade-off.
Other developers too usually set large timeout factors. Increase the
default to 20 seconds to match reality.
|
|
|
|
I keep trying to run tests with --help and then remembering that does
nothing when it throws an error. That means I have to dig into the
source when I want to refer to flags or env vars and re-read a good
amount of code to find the nested locations.
Make this all much more user friendly with a usage screen that gets
printed out whenever an unknown option is specified.
|
|
Protect TTY against an expected memory corruption from testcase
tst-malloc-backtrace, which is expected to SIGABRT after a forced memory
corruption.
|
|
While trying to get nptl/tst-initializers1.c to include the test skeleton, I
came across a couple of speed bumps. Firstly: after making the appropriate
changes to the test, running `make check' led to this error:
> In file included from ../malloc/malloc.h:24:0,
..
> from tst-initializers1.c:60:
> ../include/stdio.h:111:1: error: unknown type name `wint_t'
> extern wint_t __getwc_unlocked (FILE *__fp);
So, `wint_t' is used before being defined. Question: Why did test-skeleton.c
not cause this error in any of the other tests that include it?
Anyway, I noticed include/stdio.h includes stddef.h, which in turn defines
`wint_t', but only if `__need_wint_t' is defined. So I put in a
`#define __need_wint_t' before the include to get rid of the error. Is that
the correct fix?
A subsequent `make && make check' led to this second error:
> from tst-initializers1-c89.c:1:
> ../test-skeleton.c: In function `main':
> ../test-skeleton.c:356:11: error: `for' loop initial declarations are only
> allowed in C99 mode
> for (struct temp_name_list *n = temp_name_list;
Although there seem to be several other C89 no-noes in test-skeleton.c, I
needed only to fix this specific one for gcc-4.8.3 to stop complaining.
|
|
add_temp_file now makes a copy which is freed by delete_temp_files.
Callers to create_temp_file can now free the returned file name to
avoid the memory leak. These changes do not affect the leak behavior
of existing code.
Also address a NULL pointer derefence in tzset after a memoru allocation
failure, found during testing.
|
|
|
|
|
|
Modifies the test examination in test-skeleton.c so that a test can be
successful if it is interrupted or it returns uninterrupted with the
expected status. For this both EXPECTED_SIGNAL and EXPECTED_STATUS
have to be set, as is done in tst-strcoll-overflow.c.
|
|
This makes sure any subprocesses created by the program being tested get
killed as well if their parent times out. Otherwise if they are really
stuck, they may remain there running forever after the test case and
then the whole test suite has completed, until killed by hand.
* test-skeleton.c (signal_handler): Kill the whole process group
before killing the child individually.
(main): Report any failure on `setpgid'.
|
|
At the moment the test skeleton uses a mixture of stdout and
stderr for error message output. Using stdout for all test output
keeps all output correctly ordered and properly redirected to the
output file. The suggestion to use stdout is also made on the wiki:
https://sourceware.org/glibc/wiki/Testing/Testsuite#Writing_a_test_case
ChangeLog:
2014-06-23 Will Newton <will.newton@linaro.org>
* test-skeleton.c (signal_handler): Use printf and %m
rather than perror. Use printf rather than fprintf to
stderr. Use puts rather than fputs to stderr.
(main): Likewise.
|
|
We have multiple tests that copy & paste the same logic for disabling the
fortification output. Let's unify this in the test-skeleton instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
|
|
|
|
|
|
|
|
mallopt appropriately.
* malloc/malloc.h: Define M_PERTURB.
* malloc/malloc.c (perturb_byte): New variable.
(alloc_perturb, free_perturb): New macros.
(_int_malloc): Before returning, overwrite the memory if this is
requested.
(_int_free): Overwrite freed memory if requested.
(mALLOPt): Handle M_PERTURB.
* test-skeleton.c: Add call to mallopt with M_PERTURB command.
|
|
|
|
|
|
2004-02-18 Carlos O'Donell <carlos@baldric.uwo.ca>
* test-skeleton.c (main): If set, use environment variable
TIMEOUTFACTOR to scale test TIMEOUT.
|
|
* inet/rcmd.c: Provide better error message in case of unknown
host. Remove USE_IN_LIBIO.
* nscd/nscd.init: Updated version, more conforming with current
init file standards.
* nscd/nscd-client.h (_PATH_NSCDPID): Move the file into
/var/run/nscd directory.
(_PATH_NSCDSOCKET): Likewise.
* test-skeleton.c (timeout_handler): Fix error message.
|
|
declarations.
* stdio-common/tst-sprintf.c: Include <stdlib.h> for free declaration.
* stdlib/tst-strtod.c (main): Pass long double value.
* test-skeleton.c: Include <time.h> for nanosleep declaration.
2003-06-25 Andreas Jaeger <aj@suse.de>
* posix/transbug.c: Include <string.h> for memset and strlen
declarations.
* stdio-common/tst-sprintf.c: Include <stdlib.h> for free declaration.
* stdlib/tst-strtod.c (main): Pass long double value.
* test-skeleton.c: Include <time.h> for nanosleep declaration.
|
|
2003-06-19 Jakub Jelinek <jakub@redhat.com>
* test-skeleton.c (timeout_handler): If waitpid returned 0,
retry once after a second. If killed == 0, assume
WTERMSIG (status) == SIGKILL.
|
|
* test-skeleton.c (main): If EXPECTED_STATUS is defined check that
returned status from child matches.
|
|
2003-06-07 Ulrich Drepper <drepper@redhat.com>
* Makeconfig (gnulib): Add -lgcc_eh once again.
|