aboutsummaryrefslogtreecommitdiff
path: root/sysdeps/powerpc/powerpc64/power7
AgeCommit message (Collapse)AuthorFilesLines
2024-02-23powerpc: Remove power7 strstr optimizationAdhemerval Zanella3-563/+0
The optimization is not faster than the generic algorithm, using the bench-strstr the geometric mean running on a POWER10 machine using gcc 13.1.1 is 482.47 while the default __strstr_ppc is 340.97 (which uses the generic implementation). Also, there is no need to redirect the internal str*/mem* call to optimized version, internal ifunc is supported and enabled for internal calls (meaning that the generic implementation will use any asm optimization if available). Checked on powerpc64le-linux-gnu. Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
2024-01-01Update copyright dates with scripts/update-copyrightsPaul Eggert21-21/+21
2023-05-23Fix misspellings in sysdeps/powerpc -- BZ 25337Paul Pluzhnikov4-4/+4
All fixes are in comments, so the binaries should be identical before/after this commit, but I can't verify this. Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
2023-03-02powerpc: Remove powerpc64 strncmp variantsAdhemerval Zanella Netto1-228/+0
The default, and power7 implementation just adds word aligned access when inputs have the same aligment. The unaligned case is still done by byte operations. This is already covered by the generic implementation, which also add the unaligned input optimization. Checked on powerpc64-linux-gnu built without multi-arch for powerpc64, power7, power8, and power9 (build for le). Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
2023-02-08string: Add libc_hidden_proto for memrchrAdhemerval Zanella1-0/+1
Although static linker can optimize it to local call, it follows the internal scheme to provide hidden proto and definitions. Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
2023-01-06Update copyright dates with scripts/update-copyrightsJoseph Myers22-22/+22
2022-02-23powerpc: Remove powerpc64 bzero optimizationsAdhemerval Zanella1-12/+0
The symbol is not present in current POSIX specification and compiler already generates memset call.
2022-02-23powerpc: Remove bcopy optimizationsAdhemerval Zanella2-15/+0
The symbols is not present in current POSIX specification and compiler already generates memmove call.
2022-01-01Update copyright dates with scripts/update-copyrightsPaul Eggert22-22/+22
I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 7061 files FOO. I then removed trailing white space from math/tgmath.h, support/tst-support-open-dev-null-range.c, and sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following obscure pre-commit check failure diagnostics from Savannah. I don't know why I run into these diagnostics whereas others evidently do not. remote: *** 912-#endif remote: *** 913: remote: *** 914- remote: *** error: lines with trailing whitespace found ... remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
2021-10-26String: Add hidden defs for __memcmpeq() to enable internal usageNoah Goldstein1-0/+1
No bug. This commit adds hidden defs for all declarations of __memcmpeq. This enables usage of __memcmpeq without the PLT for usage internal to GLIBC.
2021-10-26String: Add support for __memcmpeq() ABI on all targetsNoah Goldstein1-0/+1
No bug. This commit adds support for __memcmpeq() as a new ABI for all targets. In this commit __memcmpeq() is implemented only as an alias to the corresponding targets memcmp() implementation. __memcmpeq() is added as a new symbol starting with GLIBC_2.35 and defined in string.h with comments explaining its behavior. Basic tests that it is callable and works where added in string/tester.c As discussed in the proposal "Add new ABI '__memcmpeq()' to libc" __memcmpeq() is essentially a reserved namespace for bcmp(). The means is shares the same specifications as memcmp() except the return value for non-equal byte sequences is any non-zero value. This is less strict than memcmp()'s return value specification and can be better optimized when a boolean return is all that is needed. __memcmpeq() is meant to only be called by compilers if they can prove that the return value of a memcmp() call is only used for its boolean value. All tests in string/tester.c passed. As well build succeeds on x86_64-linux-gnu target.
2021-09-03Remove "Contributed by" linesSiddhesh Poyarekar10-10/+0
We stopped adding "Contributed by" or similar lines in sources in 2012 in favour of git logs and keeping the Contributors section of the glibc manual up to date. Removing these lines makes the license header a bit more consistent across files and also removes the possibility of error in attribution when license blocks or files are copied across since the contributed-by lines don't actually reflect reality in those cases. Move all "Contributed by" and similar lines (Written by, Test by, etc.) into a new file CONTRIBUTED-BY to retain record of these contributions. These contributors are also mentioned in manual/contrib.texi, so we just maintain this additional record as a courtesy to the earlier developers. The following scripts were used to filter a list of files to edit in place and to clean up the CONTRIBUTED-BY file respectively. These were not added to the glibc sources because they're not expected to be of any use in future given that this is a one time task: https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-04-30powerpc64le: Optimized memmove for POWER10Lucas A. M. Magalhaes1-0/+2
This patch was initially based on the __memmove_power7 with some ideas from strncpy implementation for Power 9. Improvements from __memmove_power7: 1. Use lxvl/stxvl for alignment code. The code for Power 7 uses branches when the input is not naturally aligned to the width of a vector. The new implementation uses lxvl/stxvl instead which reduces pressure on GPRs. It also allows the removal of branch instructions, implicitly removing branch stalls and mispredictions. 2. Use of lxv/stxv and lxvl/stxvl pair is safe to use on Cache Inhibited memory. On Power 10 vector load and stores are safe to use on CI memory for addresses unaligned to 16B. This code takes advantage of this to do unaligned loads. The unaligned loads don't have a significant performance impact by themselves. However doing so decreases register pressure on GPRs and interdependence stalls on load/store pairs. This also improved readability as there are now less code paths for different alignments. Finally this reduces the overall code size. 3. Improved performance. This version runs on average about 30% better than memmove_power7 for lengths larger than 8KB. For input lengths shorter than 8KB the improvement is smaller, it has on average about 17% better performance. This version has a degradation of about 50% for input lengths in the 0 to 31 bytes range when dest is unaligned. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
2021-01-02Update copyright dates with scripts/update-copyrightsPaul Eggert22-22/+22
I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
2020-03-25powerpc64: apply -mabi=ibmlongdouble to special filesPaul E. Murphy1-1/+5
Some of these files depend on the avoidance of using the various register sets of POWER. When enabling the IEEE 128 long double, we must be sure to disable this ABI as some compilers will refuse to compile if -mno-vsx and -mabi=ieeelongdouble are both present. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
2020-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers22-22/+22
2019-09-07Prefer https to http for gnu.org and fsf.org URLsPaul Eggert22-22/+22
Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-07-08powerpc: refactor logb{f,l}Adhemerval Zanella3-3/+0
The power7 logb implementation does not show a performance gain on ISA 2.07+ chips with faster floating-point to GRP instructions (currently POWER8 and POWER9). This patch moves the POWER7 implementation to generic one and enables it for POWER7. It also add some cleanup to use inline floating-point number instead of define them using static const. The performance difference is for POWER9: - Without patch: "logb": { "subnormal": { "duration": 4.99202e+09, "iterations": 8.83662e+08, "max": 75.194, "min": 5.501, "mean": 5.64925 }, "normal": { "duration": 4.97063e+09, "iterations": 9.97094e+08, "max": 46.489, "min": 4.956, "mean": 4.98512 } } - With patch: "logb": { "subnormal": { "duration": 4.97226e+09, "iterations": 9.92036e+08, "max": 77.209, "min": 4.892, "mean": 5.01218 }, "normal": { "duration": 4.96192e+09, "iterations": 1.07545e+09, "max": 12.361, "min": 4.593, "mean": 4.61382 } } The ifunc implementation is also enabled only for powerpc64. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/power7/fpu/s_logb.c: Move to ... * sysdeps/powerpc/fpu/s_logb.c: ... here. Use inline FP constants. * sysdeps/powerpc/power7/fpu/s_logbf.c: Move to ... * sysdeps/powerpc/fpu/s_logbf.c: ... here. Use inline FP constants. * sysdeps/powerpc/power7/fpu/s_logbl.c: Move to ... * sysdeps/powerpc/fpu/s_logbl.c: ... here. Use inline FP constants. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-power7.c: Adjust implementation path. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf-power7.c: Adjust implementation path. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbl-power7.c: Adjust implementation path. * sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_log* objects. (CFLAGS-s_logbf-power7.c, CFLAGS-s_logbl-power7.c, CFLAGS-s_logb-power7.c): New fule. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-power7.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-power7.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-ppc64.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-power7.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-power7.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-ppc64.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-ppc64.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-power7.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-power7.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-ppc64.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-ppc64.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl.c: Move to ... * sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl.c: ... here. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile: Remove file. * sysdeps/powerpc/powerpc64/power7/fpu/s_logb.c: Remove file. * sysdeps/powerpc/powerpc64/power7/fpu/s_logbf.c: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_logbl.c: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
2019-06-12powerpc: Remove optimized finiteAdhemerval Zanella2-71/+0
The powerpc finite optimization do not show much gain: - GCC will call libm iff -fsignaling-nans is used. This usage pattern is usually not performance oriented and for such calls PLT overhead should dominate execution time. - The power7 uses ftdiv to optimize for some input patterns, but at cost of others. Comparing against generic C implementation built for powerpc64-linux-gnu-power7 (--with-cpu=power7): - Generic sysdeps/ieee754 implementation: "isfinite": { "": { "duration": 5.0082e+09, "iterations": 2.45299e+09, "max": 43.824, "min": 2.008, "mean": 2.04167 }, "INF": { "duration": 4.66554e+09, "iterations": 2.28288e+09, "max": 35.73, "min": 2.008, "mean": 2.04371 }, "NAN": { "duration": 4.66274e+09, "iterations": 2.28716e+09, "max": 34.161, "min": 2.009, "mean": 2.03866 } } - power7 optimized one: "isfinite": { "": { "duration": 4.99111e+09, "iterations": 2.65566e+09, "max": 25.015, "min": 1.716, "mean": 1.87942 }, "INF": { "duration": 4.6783e+09, "iterations": 2.0999e+09, "max": 35.264, "min": 1.868, "mean": 2.22787 }, "NAN": { "duration": 4.67915e+09, "iterations": 2.08678e+09, "max": 38.099, "min": 1.869, "mean": 2.24228 } } So it basically optimizes marginally for normal numbers while increasing the latency for other kind of FP. - The power8 implementation is just the generic implementation using ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation). So generic implementation is the best option for powerpc64le. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile (sysdeps_routines, libm-sysdep_routines): Remove s_finite* objects. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite-power7.S: Remove file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef.c: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_finite.S: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_finitef.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_call): Remove s_finite* objects. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-power7.S: Remove file. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-power8.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef.c: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_finite.S: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_finitef.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_finite.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_finitef.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
2019-06-12powerpc: Remove optimized isinfAdhemerval Zanella2-70/+0
The powerpc isinf optimizations onyl adds complexity: - GCC will call libm iff -fsignaling-nans is used. This usage pattern is usually not performance oriented and for such calls PLT overhead should dominate execution time. - The power7 uses ftdiv to optimize for some input pattern and branch implementation for INF and denormal that does: return (ix & UINT64_C (0x7fffffffffffffff)) == UINT64_C (0x7ff0000000000000) Although it does show slight better latency than generic algorithm (as below), it is only for power7 and requires it to override it for power8. - The power8 implementation is just the generic implementation using ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation). So generic implementation is the best option for powerpc64le. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile (sysdeps_routines, libm-sysdep_routines): Remove s_isinf* and s_isinf* objects. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf-power7.S: Remove file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinff-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinff.c: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_isinf.S: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_isinff.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_call): Remove s_isinf* and s_isinf* objects. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-power7.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-power8.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinff-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinff.c: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_isinf.S: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_isinff.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_isinf.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_isinff.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
2019-06-12powerpc: Remove optimized isnanAdhemerval Zanella2-69/+0
The powerpc isnan optimizations are not really a gain: - GCC will call libm iff -fsignaling-nans is used. This usage pattern is usually not performance oriented and for such calls PLT overhead should dominate execution time. - The power5, power6, and power6x are just micro-optimization to improve the Load-Hit-Store hazards from floating-point to general register transfer, and current GCC already has support to minimize it by inserting either extra nops or group dispatch instructions. - The power7 uses ftdiv to optimize for some input patterns, but at cost of others. Comparing against generic C implementation built for powerpc-linux-gnu-power4 (which uses the hp-timing support on benchtests): - Generic sysdeps/ieee754 implementation: "isnan": { "": { "duration": 4.98415e+09, "iterations": 2.34516e+09, "max": 45.925, "min": 2.052, "mean": 2.12529 }, "INF": { "duration": 4.74057e+09, "iterations": 1.69761e+09, "max": 91.01, "min": 2.052, "mean": 2.79249 }, "NAN": { "duration": 4.74071e+09, "iterations": 1.68768e+09, "max": 282.343, "min": 2.052, "mean": 2.809 } } - power7 optimized one: $ ./testrun.sh benchtests/bench-isnan "isnan": { "": { "duration": 4.96842e+09, "iterations": 2.56297e+09, "max": 50.048, "min": 1.872, "mean": 1.93854 }, "INF": { "duration": 4.76648e+09, "iterations": 1.54213e+09, "max": 373.408, "min": 2.661, "mean": 3.09084 }, "NAN": { "duration": 4.76845e+09, "iterations": 1.54515e+09, "max": 51.016, "min": 2.736, "mean": 3.08607 } } So it basically optimizes marginally for normal numbers while increasing the latency for other kind of FP. - The generic implementation requires getting the floating point status, disable the invalid operation bit, and restore the floating-point status. Each operation is costly and requires flushing the FP pipeline. Using the same scenarion for the previous analysis: "isnan": { "": { "duration": 5.08284e+09, "iterations": 6.2898e+08, "max": 41.844, "min": 8.057, "mean": 8.08108 }, "INF": { "duration": 4.97904e+09, "iterations": 6.16176e+08, "max": 39.661, "min": 8.057, "mean": 8.08055 }, "NAN": { "duration": 4.98695e+09, "iterations": 5.95866e+08, "max": 29.728, "min": 8.345, "mean": 8.36925 } } - The power8 implementation is just the generic implementation using ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation). So generic implementation is the best option for powerpc64le. Checked on powerpc-linux-gnu (built without --with-cpu, with --with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch), powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+ and --disable-multi-arch). * sysdeps/powerpc/fpu/s_isnan.c: Remove file. * sysdeps/powerpc/fpu/s_isnanf.S: Likewise. * sysdeps/powerpc/powerpc32/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile (sysdeps_routines, libm-sysdep_routines): Remove s_isnan-* and s_isnanf-* objects. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power5.S: Remove file * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power6.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power7.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf-power5.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf-power6.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf.c: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/s_isnanf.S: Likewise. * sysdeps/powerpc/powerpc32/power6/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc32/power6/fpu/s_isnanf.S: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc32/power7/fpu/s_isnanf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_calls): Remove s_isnan-* and s_isnanf-* objects. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power5.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power6.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power6x.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power7.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power8.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnanf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power5/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power6/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power6x/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_isnanf.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_isnanf.S: Likewise. Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
2019-05-30powerpc: Fix build failures with current GCCGabriel F. T. Gomes1-0/+1
Since GCC commit 271500 (svn), also known as the following commit on the git mirror: commit 61edec870f9fdfb5df3fa4e40f28cbaede28a5b1 Author: amodra <amodra@138bc75d-0d04-0410-961f-82ee72b054a4> Date: Wed May 22 04:34:26 2019 +0000 [RS6000] Don't pass -many to the assembler glibc builds are failing when an assembly implementation does not declare the correct '.machine' directive, or when no such directive is declared at all. For example, when a POWER6 instruction is used, but '.machine power6' is not declared, the assembler will fail with an error similar to the following: ../sysdeps/powerpc/powerpc64/power8/strcmp.S: Assembler messages: 24 ../sysdeps/powerpc/powerpc64/power8/strcmp.S:55: Error: unrecognized opcode: `cmpb' This patch adds '.machine powerN' directives where none existed, as well as it updates '.machine power7' directives on POWER8 files, because the minimum binutils version required to build glibc (binutils 2.25) now provides this machine version. It also adds '-many' to the assembler command used to build tst-set_ppr.c. Tested for powerpc, powerpc64, and powerpc64le, as well as with build-many-glibcs.py for powerpc targets. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
2019-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers25-25/+25
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2018-04-27powerpc64*: fix the order of implied sysdeps directoriesGabriel F. T. Gomes4-5/+0
The creation of the divergent sysdeps directory for powerpc64le commit 2f7f3cd8cd302bb10908c86f3f7b349df0a78e6a Author: Paul E. Murphy <murphyp@linux.vnet.ibm.com> Date: Fri Jul 15 18:04:40 2016 -0500 powerpc64le: Create divergent sysdep directory for powerpc64le. allowed float128 to be enabled for powerpc64le (little-endian) and not for powerpc64 (big-endian). Since the only intended difference between them was the presence or absence of the float128 interface, the sysdeps directory for powerpc64le explicitly reused the files from powerpc64 (through the use of Implies files). Although this works, it also means that files under the powerpc64 directory might be preferred over files under powerpc64le. For instance, on a build for powerpc64le with target set to power9, a file from powerpc64/power5 might get built, even though a file with the same name exists in powerpc64le/power8. That happens because the processor hierarchy was only defined in the sysdeps directory for powerpc64 (and borrowed by powerpc64le). This patch fixes this behavior, by creating new subdirectories under powerpc64 (i.e.: powerpc64/be and powerpc64/le) and creating new Implies files to provide the hierarchy of processors for powerpc64 and powerpc64le separately. These changes have no effect on installed, stripped binaries (which remain unchanged). Tested that installed stripped binaries are unchanged and that there are no regressions on powerpc64 and powerpc64le.
2018-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers25-25/+25
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2017-10-25powerpc: Replace lxvd2x/stxvd2x with lvx/stvx in P7's memcpy/memmoveRajalakshmi Srinivasaraghavan2-96/+96
POWER9 DD2.1 and earlier has an issue where some cache inhibited vector load traps to the kernel, causing a performance degradation. To handle this in memcpy and memmove, lvx/stvx is used for aligned addresses instead of lxvd2x/stxvd2x. Reference: https://patchwork.ozlabs.org/patch/814059/ * sysdeps/powerpc/powerpc64/power7/memcpy.S: Replace lxvd2x/stxvd2x with lvx/stvx. * sysdeps/powerpc/powerpc64/power7/memmove.S: Likewise. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2017-10-23PowerPC64 power7 strncpy stack handling and cfiAlan Modra1-10/+13
This patch moves the frame setup and teardown to immediately around the single memset call, as has been done for power8. I've also decreased FRAMESIZE to that needed to save the two callee-saved registers used. Plus added cfi. * sysdeps/powerpc/powerpc64/power7/strncpy.S: Decrease FRAMESIZE. Move LR save and frame setup/teardown and LR restore to immediately around memset call. Provide cfi. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
2017-10-13[BZ #22142] powerpc: Fix the carry bit on mpn_[add|sub]_n on POWER7Tulio Magno Quites Machado Filho1-4/+4
Fix the ifdef clause that was being used in the opposite way, setting a wrong value of the carry bit. This is also correcting 2 memory accesses that were mistakenly referring to r0 while they were supposed to mean the immediate value 0. [BZ #22142] * stdio-common/tst-printf.c (fp_test): Add tests for DBL_MAX and -DBL_MAX. (do_test): Likewise. * stdio-common/tst-printf.sh: Likewise. * sysdeps/powerpc/powerpc64/power7/add_n.S: Invert the initial ifdef clause in order to set the carry bit right. Replace r0 by 0 without changing the behavior.
2017-08-08Do not use __ptr_t.Joseph Myers3-3/+3
sys/cdefs.h has a macro __ptr_t, which a few places in glibc use instead of void *. void * is a well-understood standard type for that purpose and in a post-C89 context there is no need for a macro for it; this patch changes those places to use void * directly instead. Unlike __long_double_t, __ptr_t is widely used outside glibc (or at least has many hits on codesearch.debian.net). I don't know how many of those uses would break if sys/cdefs.h ceased to define the macro, but there's enough risk that this patch leaves the definition and just removes the uses within glibc; removal of the definition can be considered separately if desired. Tested for x86_64, and with build-many-glibcs.py. * malloc/mcheck.c (old_free_hook): Use void * instead of __ptr_t. (old_malloc_hook): Likewise. (old_memalign_hook): Likewise. (old_realloc_hook): Likewise. (struct hdr): Likewise. (flood): Likewise. (freehook): Likewise. (mallochook): Likewise. (memalignhook): Likewise. (reallochook): Likewise. (mprobe): Likewise. * malloc/mtrace.c (mallwatch): Likewise. (tr_old_free_hook): Likewise. (tr_old_malloc_hook): Likewise. (tr_old_realloc_hook): Likewise. (tr_old_memalign_hook): Likewise. (tr_where): Likewise. (lock_and_info): Likewise. (tr_freehook): Likewise. (tr_mallochook): Likewise. (tr_reallochook): Likewise. (tr_memalignhook): Likewise. * misc/err.h [!__GNUC_VA_LIST] (__gnuc_va_list): Likewise. * misc/mmap.c (__mmap): Likewise. * misc/mmap64.c (__mmap64): Likewise. * misc/mprotect.c (__mprotect): Likewise. * misc/msync.c (msync): Likewise. * misc/munmap.c (__munmap): Likewise. * posix/posix_madvise.c (posix_madvise): Likewise. * socket/send.c (__send): Likewise. * socket/sendto.c (__sendto): Likewise. * socket/setsockopt.c (__setsockopt): Likewise. * string/memcmp.c (__ptr_t): Remove macro. (MEMCMP): Use void * instead of ptr_t. * string/memrchr.c (__ptr_t): Remove macro. (__memrchr): Use void * instead of ptr_t. * sysdeps/mach/hurd/dl-sysdep.c (__mmap): Likewise. * sysdeps/mach/hurd/mmap.c (__mmap): Likewise. * sysdeps/mach/hurd/mmap64.c (__mmap64): Likewise. * sysdeps/mach/mprotect.c (__mprotect): Likewise. * sysdeps/mach/msync.c (msync): Likewise. * sysdeps/mach/munmap.c (__munmap): Likewise. * sysdeps/mips/bits/setjmp.h (struct __jmp_buf_internal_tag): Likewise. * sysdeps/posix/getcwd.c (__getcwd): Likewise. * sysdeps/powerpc/powerpc32/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc32/power4/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc32/power4/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc32/power6/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc32/power6/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc32/power7/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc32/power7/mempcpy.S (__mempcpy): Likewise. * sysdeps/powerpc/powerpc32/power7/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power4/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/power4/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power6/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/power6/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power7/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/power7/mempcpy.S (__mempcpy): Likewise. * sysdeps/powerpc/powerpc64/power7/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power8/memset.S (memset): Likewise. * sysdeps/tile/memcmp.c (__ptr_t): Remove macro. (MEMCMP): Use void * instead of ptr_t. * sysdeps/unix/sysv/linux/alpha/oldglob.c (old_glob_t): Likewise. * sysdeps/unix/sysv/linux/mmap.c (__mmap): Likewise.
2017-06-20Use locale_t, not __locale_t, throughout glibcZack Weinberg1-1/+1
<locale.h> is specified to define locale_t in POSIX.1-2008, and so are all of the headers that define functions that take locale_t arguments. Under _GNU_SOURCE, the additional headers that define such functions have also always defined locale_t. Therefore, there is no need to use __locale_t in public function prototypes, nor in any internal code. * ctype/ctype-c99_l.c, ctype/ctype.h, ctype/ctype_l.c * include/monetary.h, include/stdlib.h, include/time.h * include/wchar.h, locale/duplocale.c, locale/freelocale.c * locale/global-locale.c, locale/langinfo.h, locale/locale.h * locale/localeinfo.h, locale/newlocale.c * locale/nl_langinfo_l.c, locale/uselocale.c * localedata/bug-usesetlocale.c, localedata/tst-xlocale2.c * stdio-common/vfscanf.c, stdlib/monetary.h, stdlib/stdlib.h * stdlib/strfmon_l.c, stdlib/strtod_l.c, stdlib/strtof_l.c * stdlib/strtol.c, stdlib/strtol_l.c, stdlib/strtold_l.c * stdlib/strtoll_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c * string/strcasecmp.c, string/strcoll_l.c, string/string.h * string/strings.h, string/strncase.c, string/strxfrm_l.c * sysdeps/ieee754/float128/strtof128_l.c * sysdeps/ieee754/float128/wcstof128.c * sysdeps/ieee754/float128/wcstof128_l.c * sysdeps/ieee754/ldbl-128ibm/strtold_l.c * sysdeps/ieee754/ldbl-64-128/strtold_l.c * sysdeps/ieee754/ldbl-opt/nldbl-compat.c * sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c * sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c * sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c * sysdeps/powerpc/powerpc32/power7/strcasecmp.S * sysdeps/powerpc/powerpc64/power7/strcasecmp.S * sysdeps/x86_64/strcasecmp_l-nonascii.c * sysdeps/x86_64/strncase_l-nonascii.c, time/strftime_l.c * time/strptime_l.c, time/time.h, wcsmbs/mbsrtowcs_l.c * wcsmbs/wchar.h, wcsmbs/wcscasecmp.c, wcsmbs/wcsncase.c * wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c * wcsmbs/wcstof_l.c, wcsmbs/wcstol_l.c, wcsmbs/wcstold.c * wcsmbs/wcstold_l.c, wcsmbs/wcstoll_l.c, wcsmbs/wcstoul_l.c * wcsmbs/wcstoull_l.c, wctype/iswctype_l.c * wctype/towctrans_l.c, wctype/wcfuncs_l.c * wctype/wctrans_l.c, wctype/wctype.h, wctype/wctype_l.c: Change all uses of __locale_t to locale_t.
2017-06-14PowerPC64 ENTRY_TOCLESSAlan Modra22-24/+30
A number of functions in the sysdeps/powerpc/powerpc64/ tree don't use or change r2, yet declare a global entry that sets up r2. This patch fixes that problem, and consolidates the ENTRY and EALIGN macros. * sysdeps/powerpc/powerpc64/sysdep.h: Formatting. (NOPS, ENTRY_3): New macros. (ENTRY): Rewrite. (ENTRY_TOCLESS): Define. (EALIGN, EALIGN_W_0, EALIGN_W_1, EALIGN_W_2, EALIGN_W_4, EALIGN_W_5, EALIGN_W_6, EALIGN_W_7, EALIGN_W_8): Delete. * sysdeps/powerpc/powerpc64/a2/memcpy.S: Replace EALIGN with ENTRY. * sysdeps/powerpc/powerpc64/dl-trampoline.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_ceil.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_ceilf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_floor.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_floorf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_rint.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_rintf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_round.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_roundf.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Likewise. * sysdeps/powerpc/powerpc64/memset.S: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_finite.S: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_isinf.S: Likewise. * sysdeps/powerpc/powerpc64/power7/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strstr.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/e_expf.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_cosf.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_sinf.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strcasestr.S: Likewise. * sysdeps/powerpc/powerpc64/addmul_1.S: Use ENTRY_TOCLESS. * sysdeps/powerpc/powerpc64/cell/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_copysignl.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_fabsl.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_llrintf.S: Likewise. * sysdeps/powerpc/powerpc64/lshift.S: Likewise. * sysdeps/powerpc/powerpc64/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/mul_1.S: Likewise. * sysdeps/powerpc/powerpc64/power4/memcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power4/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power4/memset.S: Likewise. * sysdeps/powerpc/powerpc64/power4/strncmp.S: Likewise. * sysdeps/powerpc/powerpc64/power5+/fpu/s_ceil.S: Likewise. * sysdeps/powerpc/powerpc64/power5+/fpu/s_ceilf.S: Likewise. * sysdeps/powerpc/powerpc64/power5+/fpu/s_floor.S: Likewise. * sysdeps/powerpc/powerpc64/power5+/fpu/s_floorf.S: Likewise. * sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: Likewise. * sysdeps/powerpc/powerpc64/power5+/fpu/s_round.S: Likewise. * sysdeps/powerpc/powerpc64/power5+/fpu/s_roundf.S: Likewise. * sysdeps/powerpc/powerpc64/power5+/fpu/s_trunc.S: Likewise. * sysdeps/powerpc/powerpc64/power5+/fpu/s_truncf.S: Likewise. * sysdeps/powerpc/powerpc64/power5/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Likewise. * sysdeps/powerpc/powerpc64/power6/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power6/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power6/memset.S: Likewise. * sysdeps/powerpc/powerpc64/power6x/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Likewise. * sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: Likewise. * sysdeps/powerpc/powerpc64/power7/add_n.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memchr.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memmove.S: Likewise. * sysdeps/powerpc/powerpc64/power7/mempcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memrchr.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memset.S: Likewise. * sysdeps/powerpc/powerpc64/power7/rawmemchr.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strcasecmp.S (strcasecmp_l): Likewise. * sysdeps/powerpc/powerpc64/power7/strchr.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strchrnul.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strlen.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strncmp.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strncpy.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strnlen.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strrchr.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_finite.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_isinf.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_isnan.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Likewise. * sysdeps/powerpc/powerpc64/power8/fpu/s_llround.S: Likewise. * sysdeps/powerpc/powerpc64/power8/memcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power8/memset.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strchr.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strlen.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strncmp.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strncpy.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strnlen.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strrchr.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strspn.S: Likewise. * sysdeps/powerpc/powerpc64/power9/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power9/strncmp.S: Likewise. * sysdeps/powerpc/powerpc64/strchr.S: Likewise. * sysdeps/powerpc/powerpc64/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/strlen.S: Likewise. * sysdeps/powerpc/powerpc64/strncmp.S: Likewise. * sysdeps/powerpc/powerpc64/ppc-mcount.S: Store LR earlier. Don't add nop when SHARED. * sysdeps/powerpc/powerpc64/start.S: Fix comment. * sysdeps/powerpc/powerpc64/multiarch/strrchr-power8.S (ENTRY): Don't define. (ENTRY_TOCLESS): Define. * sysdeps/powerpc/powerpc32/sysdep.h (ENTRY_TOCLESS): Define. * sysdeps/powerpc/fpu/s_fma.S: Use ENTRY_TOCLESS. * sysdeps/powerpc/fpu/s_fmaf.S: Likewise.
2017-06-14PowerPC64 strncpy, stpncpy and strstr fixesAlan Modra2-0/+16
Makes __stpncpy_power8 call __memset_power8 directly rather than via an IFUNC. Fixes a missing _mcount, and removes some redundant NOPS. The *_is_local defines are also used in a followup patch. * sysdeps/powerpc/powerpc64/multiarch/strncpy-power7.S: Define MEMSET_is_local. * sysdeps/powerpc/powerpc64/multiarch/strncpy-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpncpy-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpncpy-power8.S: Likewise. Define MEMSET. * sysdeps/powerpc/powerpc64/multiarch/strstr-power7.S: Define STRLEN_is_local, STRNLEN_is_local, and STRCHR_is_local. * sysdeps/powerpc/powerpc64/power7/strstr.S: Likewise. Don't add nop after local calls. * sysdeps/powerpc/powerpc64/power7/strncpy.S: Define MEMSET_is_local. Don't add nop after local call. * sysdeps/powerpc/powerpc64/power8/strncpy.S: Likewise. Add missing CALL_MCOUNT.
2017-04-11powerpc: refactor memcmp and memmove IFUNC.Wainer dos Santos Moschetta2-5/+10
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/memcmp-power4.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/memcmp-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memmove-power7.S: Likewise. * sysdeps/powerpc/powerpc64/power4/memcmp.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power7/memcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memmove.S: Likewise.
2017-04-11powerpc: refactor memcpy and mempcpy IFUNC.Wainer dos Santos Moschetta2-4/+11
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/memcpy-a2.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/memcpy-cell.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-power4.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-power6.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/mempcpy-power7.S: Likewise. * sysdeps/powerpc/powerpc64/a2/memcpy.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/cell/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power4/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power6/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power7/mempcpy.S: Likewise.
2017-04-11powerpc: refactor memchr, memrchr, and rawmemchr IFUNC.Wainer dos Santos Moschetta3-6/+18
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/memchr-power7.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/memrchr-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/rawmemchr-power7.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memchr.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power7/memrchr.S: Likewise. * sysdeps/powerpc/powerpc64/power7/rawmemchr.S: Likewise.
2017-04-11powerpc: refactor memset IFUNC.Wainer dos Santos Moschetta1-2/+5
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/memset-power4.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/memset-power6.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/memset.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power4/memset.S: Likewise. * sysdeps/powerpc/powerpc64/power6/memset.S: Likewise. * sysdeps/powerpc/powerpc64/power7/memset.S: Likewise. * sysdeps/powerpc/powerpc64/power8/memset.S: Likewise.
2017-04-11powerpc: refactor strcasestr and strstr IFUNC.Wainer dos Santos Moschetta1-2/+6
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/strcasestr-power8.S: Define the strcasestr implementation name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/strstr-power7.S: Define strstr implementation name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/power7/strstr.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power8/strcasestr.S: Likewise.
2017-04-11powerpc: refactor strchr, strchrnul, and strrchr IFUNC.Wainer dos Santos Moschetta3-8/+20
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/strchr-power7.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/strchr-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchr-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchrnul-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchrnul-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr-power7.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strchr.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power7/strchrnul.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strrchr.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strchr.S: Likewise. * sysdeps/powerpc/powerpc64/strchr.S: Likewise.
2017-04-11powerpc: refactor strnlen and strlen IFUNC.Wainer dos Santos Moschetta2-4/+12
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/strlen-power7.S: Define the strlen implementation name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/strlen-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strlen-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strnlen-power7.S: Define the strnlen implementation name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/power7/strlen.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power7/strnlen.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strlen.S: Likewise. * sysdeps/powerpc/powerpc64/strlen.S: Likewise.
2017-04-11powerpc: refactor strcasecmp, strcmp, and strncmp IFUNC.Wainer dos Santos Moschetta2-4/+12
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l-power7.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/strcmp-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp-power8.S Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp-power9.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-power4.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-power9.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/power4/strncmp.S: Set a default function name if not defined and pass as parameter to macros accordingly. * sysdeps/powerpc/powerpc64/power7/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strncmp.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strncmp.S: Likewise. * sysdeps/powerpc/powerpc64/power9/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/power9/strncmp.S: Likewise. * sysdeps/powerpc/powerpc64/strcmp.S: Likewise. * sysdeps/powerpc/powerpc64/strncmp.S: Likewise.
2017-04-11powerpc: refactor stpcpy, stpncpy, strcpy, and strncpy IFUNC.Wainer dos Santos Moschetta1-3/+11
Clean up the IFUNC implementations for powerpc in order to remove unneeded macro definitions. Tested on ppc64le with and without --disable-multi-arch flag. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-power8.S: Define the implementation-specific function name and remove unneeded macros definition. * sysdeps/powerpc/powerpc64/multiarch/stpncpy-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpncpy-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-power8.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy-power8.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strncpy.S: Set a default function name if not defined. * sysdeps/powerpc/powerpc64/power8/strcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power8/strncpy.S: Likewise.
2017-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers25-25/+25
2016-12-16Fix powerpc64/power7 memchr for large input sizesAdhemerval Zanella1-1/+11
Current optimized powercp64/power7 memchr uses a strategy to check for p versus align(p+n) (where 'p' is the input char pointer and n the maximum size to check for the byte) without taking care for possible overflow on the pointer addition in case of large 'n'. It was triggered by 3038145ca23 where default rawmemchr (used to created ppc64 rawmemchr in ifunc selection) now uses memchr (p, c, (size_t)-1) on its implementation. This patch fixes it by implement a satured addition where overflows sets the maximum pointer size to UINTPTR_MAX. Checked on powerpc64le-linux-gnu. [BZ# 20971] * sysdeps/powerpc/powerpc64/power7/memchr.S (__memchr): Avoid overflow in pointer addition. * string/test-memchr.c (do_test): Add an argument to pass as the size on memchr. (test_main): Add check for SIZE_MAX.
2016-03-11powerpc: Rearrange cfi_offset callsRajalakshmi Srinivasaraghavan2-15/+15
This patch rearranges cfi_offset() calls after the last store so as to avoid extra DW_CFA_advance opcodes in unwind information.
2016-01-04Update copyright dates with scripts/update-copyrights.Joseph Myers25-25/+25
2015-08-25powerpc: Handle worstcase behavior in strstr() for POWER7Rajalakshmi Srinivasaraghavan1-7/+15
Instead of checking needle length, constant 'n' number of comparisons is checked to fall back to default implementation. This patch is tested on powerpc64 and powerpc64le. 2015-08-25 Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com> * sysdeps/powerpc/powerpc64/power7/strstr.S: Handle worst case.
2015-08-11powerpc: Fix PPC64/POWER7 conform testsAdhemerval Zanella2-3/+4
When building with --disable-multi-arch the memmove and strstr POWER7 optimization create and uses symbols that conflict with expect conform tests. * sysdeps/powerpc/powerpc64/power7/memmove.S (bcopy): Changing to __bcopy and add a weak_alias to bcopy. * sysdeps/powerpc/powerpc64/power7/strstr.S (strstr): Use __strnlen for static build.
2015-08-11powerpc: Use default strcpy optimization for POWER7Adhemerval Zanella2-461/+0
This patches uses the default strcpy/stpcpy implementation for POWER7/PPC64. This is faster in mostly inputs for benchtests and for multiarch the implementation uses the POWER7 strlen and memcpy. * string/stpcpy.c (__stpcpy): Use STPCPY to redefine symbol name and cleanup macro usage. * string/strcpy.c (strcpt): Use STRCPY to redefine symbol name. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-power7.S: Remove file. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/power7/stpcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strcpy.c: Likewise. * sysdeps/powerpc/powerpc64/stpcpy.S: Likewise. * sysdeps/powerpc/powerpc64/strcpy.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c [SHARED && IS_IN (libc)]: Include <string/strcpy.c>. * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c [SHARED && IS_IN (libc)]: Include <string/stpcpy.c>. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-power7.c: New file. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-power7.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/power7/strcpy.c: Likewise.
2015-08-11powerpc: Fix strnlen/power7 buildAdhemerval Zanella1-1/+2
This patch fixes the strnlen.S build with --disable-multi-arch option.
2015-08-11powerpc: Fix strstr/power7 buildAdhemerval Zanella2-0/+28
This patch fixes the strstr build with --disable-multi-arch option. The optimization calls the __strstr_ppc symbol, which always build for multiarch config but not if it is disable. This patch fixes it by adding the default C implementation object with the expected symbol name. * sysdeps/powerpc/powerpc64/power7/Makefile [$(subdir) = string] (sysdep_routines): Add strstr-ppc64. * sysdeps/powerpc/powerpc64/power7/strstr-ppc64.c: New file.
generated by cgit v1.1 at 2024-11-18 02:40:25 +0000