diff options
-rw-r--r-- | ChangeLog | 5 | ||||
-rw-r--r-- | manual/texinfo.tex | 555 |
2 files changed, 358 insertions, 202 deletions
@@ -1,3 +1,8 @@ +2013-06-25 Joseph Myers <joseph@codesourcery.com> + + * manual/texinfo.tex: Update to version 2013-06-21.17, with + trailing whitespace removed. + 2013-06-24 Mike Frysinger <vapier@gentoo.org> [BZ #10283] diff --git a/manual/texinfo.tex b/manual/texinfo.tex index 928cc28..332943d 100644 --- a/manual/texinfo.tex +++ b/manual/texinfo.tex @@ -3,11 +3,11 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2012-01-19.16} +\def\texinfoversion{2013-06-21.17} % % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, -% 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +% 2007, 2008, 2009, 2010, 2011, 2012, 2013 Free Software Foundation, Inc. % % This texinfo.tex file is free software: you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -24,13 +24,14 @@ % % As a special exception, when this file is read by TeX when processing % a Texinfo source document, you may use the result without -% restriction. (This has been our intent since Texinfo was invented.) +% restriction. This Exception is an additional permission under section 7 +% of the GNU General Public License, version 3 ("GPLv3"). % % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: -% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or -% ftp://tug.org/tex/texinfo.tex -% (and all CTAN mirrors, see http://www.ctan.org). +% http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or +% http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or +% http://www.gnu.org/software/texinfo/ (the Texinfo home page) % The texinfo.tex in any given distribution could well be out % of date, so if that's what you're using, please check. % @@ -594,7 +595,7 @@ \def\:{\spacefactor=1000 } % @* forces a line break. -\def\*{\hfil\break\hbox{}\ignorespaces} +\def\*{\unskip\hfil\break\hbox{}\ignorespaces} % @/ allows a line break. \let\/=\allowbreak @@ -887,7 +888,7 @@ where each line of input produces a line of output.} \def\popthisfilestack{\errthisfilestackempty} \def\errthisfilestackempty{\errmessage{Internal error: the stack of filenames is empty.}} - +% \def\thisfile{} % @center line @@ -895,36 +896,46 @@ where each line of input produces a line of output.} % \parseargdef\center{% \ifhmode - \let\next\centerH + \let\centersub\centerH \else - \let\next\centerV + \let\centersub\centerV \fi - \next{\hfil \ignorespaces#1\unskip \hfil}% + \centersub{\hfil \ignorespaces#1\unskip \hfil}% + \let\centersub\relax % don't let the definition persist, just in case } -\def\centerH#1{% - {% - \hfil\break - \advance\hsize by -\leftskip - \advance\hsize by -\rightskip - \line{#1}% - \break - }% +\def\centerH#1{{% + \hfil\break + \advance\hsize by -\leftskip + \advance\hsize by -\rightskip + \line{#1}% + \break +}} +% +\newcount\centerpenalty +\def\centerV#1{% + % The idea here is the same as in \startdefun, \cartouche, etc.: if + % @center is the first thing after a section heading, we need to wipe + % out the negative parskip inserted by \sectionheading, but still + % prevent a page break here. + \centerpenalty = \lastpenalty + \ifnum\centerpenalty>10000 \vskip\parskip \fi + \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi + \line{\kern\leftskip #1\kern\rightskip}% } -\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}} % @sp n outputs n lines of vertical space - +% \parseargdef\sp{\vskip #1\baselineskip} % @comment ...line which is ignored... % @c is the same as @comment % @ignore ... @end ignore is another way to write a comment - +% \def\comment{\begingroup \catcode`\^^M=\other% \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% \commentxxx} {\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}} - +% \let\c=\comment % @paragraphindent NCHARS @@ -1097,7 +1108,7 @@ where each line of input produces a line of output.} % for display in the outlines, and in other places. Thus, we have to % double any backslashes. Otherwise, a name like "\node" will be % interpreted as a newline (\n), followed by o, d, e. Not good. -% +% % See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and % related messages. The final outcome is that it is up to the TeX user % to double the backslashes and otherwise make the string valid, so @@ -1107,7 +1118,7 @@ where each line of input produces a line of output.} % #1 is a control sequence in which to do the replacements, % which we \xdef. \def\txiescapepdf#1{% - \ifx\pdfescapestring\relax + \ifx\pdfescapestring\thisisundefined % No primitive available; should we give a warning or log? % Many times it won't matter. \else @@ -1173,8 +1184,8 @@ output) for that.)} % % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto). \def\dopdfimage#1#2#3{% - \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% - \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% + \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% + \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% % % pdftex (and the PDF format) support .pdf, .png, .jpg (among % others). Let's try in that order, PDF first since if @@ -1212,8 +1223,8 @@ output) for that.)} \else \immediate\pdfximage \fi - \ifdim \wd0 >0pt width \imagewidth \fi - \ifdim \wd2 >0pt height \imageheight \fi + \ifdim \wd0 >0pt width \pdfimagewidth \fi + \ifdim \wd2 >0pt height \pdfimageheight \fi \ifnum\pdftexversion<13 #1.\pdfimgext \else @@ -1357,12 +1368,17 @@ output) for that.)} \def\skipspaces#1{\def\PP{#1}\def\D{|}% \ifx\PP\D\let\nextsp\relax \else\let\nextsp\skipspaces - \ifx\p\space\else\addtokens{\filename}{\PP}% - \advance\filenamelength by 1 - \fi + \addtokens{\filename}{\PP}% + \advance\filenamelength by 1 \fi \nextsp} - \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax} + \def\getfilename#1{% + \filenamelength=0 + % If we don't expand the argument now, \skipspaces will get + % snagged on things like "@value{foo}". + \edef\temp{#1}% + \expandafter\skipspaces\temp|\relax + } \ifnum\pdftexversion < 14 \let \startlink \pdfannotlink \else @@ -1459,9 +1475,6 @@ output) for that.)} \def\ttsl{\setfontstyle{ttsl}} -% Default leading. -\newdimen\textleading \textleading = 13.2pt - % Set the baselineskip to #1, and the lineskip and strut size % correspondingly. There is no deep meaning behind these magic numbers % used as factors; they just match (closely enough) what Knuth defined. @@ -1473,6 +1486,7 @@ output) for that.)} % can get a sort of poor man's double spacing by redefining this. \def\baselinefactor{1} % +\newdimen\textleading \def\setleading#1{% \dimen0 = #1\relax \normalbaselineskip = \baselinefactor\dimen0 @@ -1745,18 +1759,24 @@ end \fi\fi -% Set the font macro #1 to the font named #2, adding on the -% specified font prefix (normally `cm'). +% Set the font macro #1 to the font named \fontprefix#2. % #3 is the font's design size, #4 is a scale factor, #5 is the CMap -% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass -% empty to omit). +% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit). +% Example: +% #1 = \textrm +% #2 = \rmshape +% #3 = 10 +% #4 = \mainmagstep +% #5 = OT1 +% \def\setfont#1#2#3#4#5{% \font#1=\fontprefix#2#3 scaled #4 \csname cmap#5\endcsname#1% } % This is what gets called when #5 of \setfont is empty. \let\cmap\gobble -% emacs-page end of cmaps +% +% (end of cmaps) % Use cm as the default font prefix. % To specify the font prefix, you must define \fontprefix @@ -1766,7 +1786,7 @@ end \fi % Support font families that don't use the same naming scheme as CM. \def\rmshape{r} -\def\rmbshape{bx} %where the normal face is bold +\def\rmbshape{bx} % where the normal face is bold \def\bfshape{b} \def\bxshape{bx} \def\ttshape{tt} @@ -1781,8 +1801,7 @@ end \def\scshape{csc} \def\scbshape{csc} -% Definitions for a main text size of 11pt. This is the default in -% Texinfo. +% Definitions for a main text size of 11pt. (The default in Texinfo.) % \def\definetextfontsizexi{% % Text fonts (11.2pt, magstep1). @@ -1907,7 +1926,7 @@ end \textleading = 13.2pt % line spacing for 11pt CM \textfonts % reset the current fonts \rm -} % end of 11pt text font size definitions +} % end of 11pt text font size definitions, \definetextfontsizexi % Definitions to make the main text be 10pt Computer Modern, with @@ -2039,7 +2058,7 @@ end \textleading = 12pt % line spacing for 10pt CM \textfonts % reset the current fonts \rm -} % end of 10pt text font size definitions +} % end of 10pt text font size definitions, \definetextfontsizex % We provide the user-level command @@ -2254,8 +2273,6 @@ end \gdef\markupsetcodequoteleft{\let`\codequoteleft} \gdef\markupsetcodequoteright{\let'\codequoteright} - -\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft} } \let\markupsetuplqcode \markupsetcodequoteleft @@ -2264,6 +2281,9 @@ end \let\markupsetuplqexample \markupsetcodequoteleft \let\markupsetuprqexample \markupsetcodequoteright % +\let\markupsetuplqkbd \markupsetcodequoteleft +\let\markupsetuprqkbd \markupsetcodequoteright +% \let\markupsetuplqsamp \markupsetcodequoteleft \let\markupsetuprqsamp \markupsetcodequoteright % @@ -2273,8 +2293,6 @@ end \let\markupsetuplqverbatim \markupsetcodequoteleft \let\markupsetuprqverbatim \markupsetcodequoteright -\let\markupsetuplqkbd \markupsetnoligaturesquoteleft - % Allow an option to not use regular directed right quote/apostrophe % (char 0x27), but instead the undirected quote from cmtt (char 0x0d). % The undirected quote is ugly, so don't make it the default, but it @@ -2364,8 +2382,7 @@ end \aftersmartic } -% like \smartslanted except unconditionally uses \ttsl, and no ic. -% @var is set to this for defun arguments. +% Unconditional use \ttsl, and no ic. @var is set to this for defuns. \def\ttslanted#1{{\ttsl #1}} % @cite is like \smartslanted except unconditionally use \sl. We never want @@ -2430,34 +2447,12 @@ end % @samp. \def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}} -% definition of @key that produces a lozenge. Doesn't adjust to text size. -%\setfont\keyrm\rmshape{8}{1000}{OT1} -%\font\keysy=cmsy9 -%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% -% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% -% \vbox{\hrule\kern-0.4pt -% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% -% \kern-0.4pt\hrule}% -% \kern-.06em\raise0.4pt\hbox{\angleright}}}} - -% definition of @key with no lozenge. If the current font is already -% monospace, don't change it; that way, we respect @kbdinputstyle. But -% if it isn't monospace, then use \tt. -% -\def\key#1{{\setupmarkupstyle{key}% - \nohyphenation - \ifmonospace\else\tt\fi - #1}\null} - -% ctrl is no longer a Texinfo command. -\def\ctrl #1{{\tt \rawbackslash \hat}#1} - -% @file, @option are the same as @samp. -\let\file=\samp -\let\option=\samp +% @indicateurl is \samp, that is, with quotes. +\let\indicateurl=\samp -% @code is a modification of @t, -% which makes spaces the same size as normal in the surrounding text. +% @code (and similar) prints in typewriter, but with spaces the same +% size as normal in the surrounding text, without hyphenation, etc. +% This is a subroutine for that. \def\tclose#1{% {% % Change normal interword space to be same as for the current font. @@ -2480,14 +2475,14 @@ end } % We *must* turn on hyphenation at `-' and `_' in @code. +% (But see \codedashfinish below.) % Otherwise, it is too hard to avoid overfull hboxes % in the Emacs manual, the Library manual, etc. - +% % Unfortunately, TeX uses one parameter (\hyphenchar) to control % both hyphenation at - and hyphenation within words. % We must therefore turn them both off (\tclose does that) -% and arrange explicitly to hyphenate at a dash. -% -- rms. +% and arrange explicitly to hyphenate at a dash. -- rms. { \catcode`\-=\active \catcode`\_=\active \catcode`\'=\active \catcode`\`=\active @@ -2501,17 +2496,36 @@ end \let-\codedash \let_\codeunder \else - \let-\realdash + \let-\normaldash \let_\realunder \fi + % Given -foo (with a single dash), we do not want to allow a break + % after the hyphen. + \global\let\codedashprev=\codedash + % \codex } + % + \gdef\codedash{\futurelet\next\codedashfinish} + \gdef\codedashfinish{% + \normaldash % always output the dash character itself. + % + % Now, output a discretionary to allow a line break, unless + % (a) the next character is a -, or + % (b) the preceding character is a -. + % E.g., given --posix, we do not want to allow a break after either -. + % Given --foo-bar, we do want to allow a break between the - and the b. + \ifx\next\codedash \else + \ifx\codedashprev\codedash + \else \discretionary{}{}{}\fi + \fi + \global\let\codedashprev=\next + } } - +\def\normaldash{-} +% \def\codex #1{\tclose{#1}\endgroup} -\def\realdash{-} -\def\codedash{-\discretionary{}{}{}} \def\codeunder{% % this is all so @math{@code{var_name}+1} can work. In math mode, _ % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.) @@ -2525,9 +2539,9 @@ end } % An additional complication: the above will allow breaks after, e.g., -% each of the four underscores in __typeof__. This is undesirable in -% some manuals, especially if they don't have long identifiers in -% general. @allowcodebreaks provides a way to control this. +% each of the four underscores in __typeof__. This is bad. +% @allowcodebreaks provides a document-level way to turn breaking at - +% and _ on and off. % \newif\ifallowcodebreaks \allowcodebreakstrue @@ -2546,6 +2560,13 @@ end \fi\fi } +% For @command, @env, @file, @option quotes seem unnecessary, +% so use \code rather than \samp. +\let\command=\code +\let\env=\code +\let\file=\code +\let\option=\code + % @uref (abbreviation for `urlref') takes an optional (comma-separated) % second argument specifying the text to display and an optional third % arg as text to display instead of (rather than in addition to) the url @@ -2692,10 +2713,6 @@ end \let\email=\uref \fi -% @kbd is like @code, except that if the argument is just one @key command, -% then @kbd has no effect. -\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}} - % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), % `example' (@kbd uses ttsl only inside of @example and friends), % or `code' (@kbd uses normal tty font always). @@ -2719,16 +2736,36 @@ end % Default is `distinct'. \kbdinputstyle distinct +% @kbd is like @code, except that if the argument is just one @key command, +% then @kbd has no effect. +\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}} + \def\xkey{\key} -\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% -\ifx\one\xkey\ifx\threex\three \key{#2}% -\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi -\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi} +\def\kbdsub#1#2#3\par{% + \def\one{#1}\def\three{#3}\def\threex{??}% + \ifx\one\xkey\ifx\threex\three \key{#2}% + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi +} -% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. -\let\indicateurl=\code -\let\env=\code -\let\command=\code +% definition of @key that produces a lozenge. Doesn't adjust to text size. +%\setfont\keyrm\rmshape{8}{1000}{OT1} +%\font\keysy=cmsy9 +%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% +% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% +% \vbox{\hrule\kern-0.4pt +% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% +% \kern-0.4pt\hrule}% +% \kern-.06em\raise0.4pt\hbox{\angleright}}}} + +% definition of @key with no lozenge. If the current font is already +% monospace, don't change it; that way, we respect @kbdinputstyle. But +% if it isn't monospace, then use \tt. +% +\def\key#1{{\setupmarkupstyle{key}% + \nohyphenation + \ifmonospace\else\tt\fi + #1}\null} % @clicksequence{File @click{} Open ...} \def\clicksequence#1{\begingroup #1\endgroup} @@ -2836,6 +2873,9 @@ end } } +% ctrl is no longer a Texinfo command, but leave this definition for fun. +\def\ctrl #1{{\tt \rawbackslash \hat}#1} + % @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}. % Ignore unless FMTNAME == tex; then it is like @iftex and @tex, % except specified as a normal braced arg, so no newlines to worry about. @@ -3126,12 +3166,17 @@ end % hopefully nobody will notice/care. \edef\ecsize{\csname\curfontsize ecsize\endcsname}% \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}% - \ifx\curfontstyle\bfstylename - % bold: - \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize + \ifmonospace + % typewriter: + \font\thisecfont = ectt\ecsize \space at \nominalsize \else - % regular: - \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \ifx\curfontstyle\bfstylename + % bold: + \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize + \else + % regular: + \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \fi \fi \thisecfont } @@ -3244,6 +3289,20 @@ end \finishedtitlepagetrue } +% Settings used for typesetting titles: no hyphenation, no indentation, +% don't worry much about spacing, ragged right. This should be used +% inside a \vbox, and fonts need to be set appropriately first. Because +% it is always used for titles, nothing else, we call \rmisbold. \par +% should be specified before the end of the \vbox, since a vbox is a group. +% +\def\raggedtitlesettings{% + \rmisbold + \hyphenpenalty=10000 + \parindent=0pt + \tolerance=5000 + \ptexraggedright +} + % Macros to be used within @titlepage: \let\subtitlerm=\tenrm @@ -3251,7 +3310,7 @@ end \parseargdef\title{% \checkenv\titlepage - \leftline{\titlefonts\rmisbold #1} + \vbox{\titlefonts \raggedtitlesettings #1\par}% % print a rule at the page bottom also. \finishedtitlepagefalse \vskip4pt \hrule height 4pt width \hsize \vskip4pt @@ -4148,7 +4207,7 @@ end % ..., but we might end up with active ones in the argument if % we're called from @code, as @code{@value{foo-bar_}}, though. % So \let them to their normal equivalents. - \let-\realdash \let_\normalunderscore + \let-\normaldash \let_\normalunderscore } } @@ -4172,7 +4231,8 @@ end % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined % with @set. % -% To get special treatment of `@end ifset,' call \makeond and the redefine. +% To get the special treatment we need for `@end ifset,' we call +% \makecond and then redefine. % \makecond{ifset} \def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}} @@ -4188,7 +4248,7 @@ end } \def\ifsetfail{\doignore{ifset}} -% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been +% @ifclear VAR ... @end executes the `...' iff VAR has never been % defined with @set, or has been undefined with @clear. % % The `\else' inside the `\doifset' parameter is a trick to reuse the @@ -4199,6 +4259,35 @@ end \def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}} \def\ifclearfail{\doignore{ifclear}} +% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written +% without the @) is in fact defined. We can only feasibly check at the +% TeX level, so something like `mathcode' is going to considered +% defined even though it is not a Texinfo command. +% +\makecond{ifcommanddefined} +\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}} +% +\def\doifcmddefined#1#2{{% + \makevalueexpandable + \let\next=\empty + \expandafter\ifx\csname #2\endcsname\relax + #1% If not defined, \let\next as above. + \fi + \expandafter + }\next +} +\def\ifcmddefinedfail{\doignore{ifcommanddefined}} + +% @ifcommandnotdefined CMD ... handled similar to @ifclear above. +\makecond{ifcommandnotdefined} +\def\ifcommandnotdefined{% + \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}} +\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}} + +% Set the `txicommandconditionals' variable, so documents have a way to +% test if the @ifcommand...defined conditionals are available. +\set txicommandconditionals + % @dircategory CATEGORY -- specify a category of the dir file % which this file should belong to. Ignore this in TeX. \let\dircategory=\comment @@ -4435,6 +4524,7 @@ end \definedummyword\guillemetright \definedummyword\guilsinglleft \definedummyword\guilsinglright + \definedummyword\lbracechar \definedummyword\leq \definedummyword\minus \definedummyword\ogonek @@ -4447,6 +4537,7 @@ end \definedummyword\quoteleft \definedummyword\quoteright \definedummyword\quotesinglbase + \definedummyword\rbracechar \definedummyword\result \definedummyword\textdegree % @@ -4498,6 +4589,7 @@ end \definedummyword\t % % Commands that take arguments. + \definedummyword\abbr \definedummyword\acronym \definedummyword\anchor \definedummyword\cite @@ -4509,7 +4601,9 @@ end \definedummyword\emph \definedummyword\env \definedummyword\file + \definedummyword\image \definedummyword\indicateurl + \definedummyword\inforef \definedummyword\kbd \definedummyword\key \definedummyword\math @@ -4556,7 +4650,10 @@ end % content at all. So for index sorting, we map @{ and @} to strings % starting with |, since that ASCII character is between ASCII { and }. \def\{{|a}% + \def\lbracechar{|a}% + % \def\}{|b}% + \def\rbracechar{|b}% % % Non-English letters. \def\AA{AA}% @@ -4732,10 +4829,9 @@ end % % ..., ready, GO: % -\def\safewhatsit#1{% -\ifhmode +\def\safewhatsit#1{\ifhmode #1% -\else + \else % \lastskip and \lastpenalty cannot both be nonzero simultaneously. \whatsitskip = \lastskip \edef\lastskipmacro{\the\lastskip}% @@ -4759,7 +4855,6 @@ end % to re-insert the same penalty (values >10000 are used for various % signals); since we just inserted a non-discardable item, any % following glue (such as a \parskip) would be a breakpoint. For example: - % % @deffn deffn-whatever % @vindex index-whatever % Description. @@ -4772,8 +4867,7 @@ end % (the whatsit from the \write), so we must insert a \nobreak. \nobreak\vskip\whatsitskip \fi -\fi -} +\fi} % The index entry written in the file actually looks like % \entry {sortstring}{page}{topic} @@ -5520,14 +5614,6 @@ end % Define @majorheading, @heading and @subheading -% NOTE on use of \vbox for chapter headings, section headings, and such: -% 1) We use \vbox rather than the earlier \line to permit -% overlong headings to fold. -% 2) \hyphenpenalty is set to 10000 because hyphenation in a -% heading is obnoxious; this forbids it. -% 3) Likewise, headings look best if no \parindent is used, and -% if justification is not attempted. Hence \raggedright. - \def\majorheading{% {\advance\chapheadingskip by 10pt \chapbreak }% \parsearg\chapheadingzzz @@ -5535,10 +5621,8 @@ end \def\chapheading{\chapbreak \parsearg\chapheadingzzz} \def\chapheadingzzz#1{% - {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\ptexraggedright - \rmisbold #1\hfill}}% - \bigskip \par\penalty 200\relax + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip \nobreak \suppressfirstparagraphindent } @@ -5697,8 +5781,7 @@ end % % Typeset the actual heading. \nobreak % Avoid page breaks at the interline glue. - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright - \hangindent=\wd0 \centerparametersmaybe + \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe \unhbox0 #1\par}% }% \nobreak\bigskip % no page break after a chapter title @@ -5720,18 +5803,18 @@ end \def\setchapterstyle #1 {\csname CHAPF#1\endcsname} % \def\unnchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\ptexraggedright - \rmisbold #1\hfill}}\bigskip \par\nobreak + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip\nobreak } \def\chfopen #1#2{\chapoddpage {\chapfonts \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% \par\penalty 5000 % } \def\centerchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt - \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}% + \nobreak\bigskip \nobreak } \def\CHAPFopen{% \global\let\chapmacro=\chfopen @@ -5876,14 +5959,15 @@ end % % We'll almost certainly start a paragraph next, so don't let that % glue accumulate. (Not a breakpoint because it's preceded by a - % discardable item.) + % discardable item.) However, when a paragraph is not started next + % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out + % or the negative glue will cause weirdly wrong output, typically + % obscuring the section heading with something else. \vskip-\parskip % - % This is purely so the last item on the list is a known \penalty > - % 10000. This is so \startdefun can avoid allowing breakpoints after - % section headings. Otherwise, it would insert a valid breakpoint between: - % @section sec-whatever - % @deffn def-whatever + % This is so the last item on the main vertical list is a known + % \penalty > 10000, so \startdefun, etc., can recognize the situation + % and do the needful. \penalty 10001 } @@ -6303,7 +6387,7 @@ end % If this cartouche directly follows a sectioning command, we need the % \parskip glue (backspaced over by default) or the cartouche can % collide with the section heading. - \ifnum\lastpenalty>10000 \vskip\parskip \fi + \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi % \vbox\bgroup \baselineskip=0pt\parskip=0pt\lineskip=0pt @@ -6338,7 +6422,7 @@ end \newdimen\nonfillparindent \def\nonfillstart{% \aboveenvbreak - \hfuzz = 12pt % Don't be fussy + \ifdim\hfuzz < 12pt \hfuzz = 12pt \fi % Don't be fussy \sepspaces % Make spaces be word-separators rather than space tokens. \let\par = \lisppar % don't ignore blank lines \obeylines % each line of input is a line of output @@ -6496,16 +6580,9 @@ end \makedispenvdef{quotation}{\quotationstart} % \def\quotationstart{% - {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip - \parindent=0pt - % - % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \indentedblockstart % same as \indentedblock, but increase right margin too. \ifx\nonarrowing\relax - \advance\leftskip by \lispnarrowing \advance\rightskip by \lispnarrowing - \exdentamount = \lispnarrowing - \else - \let\nonarrowing = \relax \fi \parsearg\quotationlabel } @@ -6531,6 +6608,32 @@ end \fi } +% @indentedblock is like @quotation, but indents only on the left and +% has no optional argument. +% +\makedispenvdef{indentedblock}{\indentedblockstart} +% +\def\indentedblockstart{% + {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip + \parindent=0pt + % + % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \ifx\nonarrowing\relax + \advance\leftskip by \lispnarrowing + \exdentamount = \lispnarrowing + \else + \let\nonarrowing = \relax + \fi +} + +% Keep a nonzero parskip for the environment, since we're doing normal filling. +% +\def\Eindentedblock{% + \par + {\parskip=0pt \afterenvbreak}% +} +\def\Esmallindentedblock{\Eindentedblock} + % LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>} % If we want to allow any <char> as delimiter, @@ -7009,7 +7112,10 @@ end \df \sl \hyphenchar\font=0 % % On the other hand, if an argument has two dashes (for instance), we - % want a way to get ttsl. Let's try @var for that. + % want a way to get ttsl. We used to recommend @var for that, so + % leave the code in, but it's strange for @var to lead to typewriter. + % Nowadays we recommend @code, since the difference between a ttsl hyphen + % and a tt hyphen is pretty tiny. @code also disables ?` !`. \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}% #1% \sl\hyphenchar\font=45 @@ -7793,7 +7899,7 @@ end \fi\fi } - +% % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is % the node name, #2 the name of the Info cross-reference, #3 the printed % node name, #4 the name of the Info file, #5 the name of the printed @@ -7803,16 +7909,21 @@ end \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} \def\ref#1{\xrefX[#1,,,,,,,]} % -\newbox\topbox +\newbox\toprefbox \newbox\printedrefnamebox +\newbox\infofilenamebox \newbox\printedmanualbox % \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup \unsepspaces % + % Get args without leading/trailing spaces. \def\printedrefname{\ignorespaces #3}% \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}% % + \def\infofilename{\ignorespaces #4}% + \setbox\infofilenamebox = \hbox{\infofilename\unskip}% + % \def\printedmanual{\ignorespaces #5}% \setbox\printedmanualbox = \hbox{\printedmanual\unskip}% % @@ -7845,12 +7956,20 @@ end \ifpdf {\indexnofonts \turnoffactive + \makevalueexpandable % This expands tokens, so do it after making catcode changes, so _ - % etc. don't get their TeX definitions. + % etc. don't get their TeX definitions. This ignores all spaces in + % #4, including (wrongly) those in the middle of the filename. \getfilename{#4}% % + % This (wrongly) does not take account of leading or trailing + % spaces in #1, which should be ignored. \edef\pdfxrefdest{#1}% - \txiescapepdf\pdfxrefdest + \ifx\pdfxrefdest\empty + \def\pdfxrefdest{Top}% no empty targets + \else + \txiescapepdf\pdfxrefdest % escape PDF special chars + \fi % \leavevmode \startlink attr{/Border [0 0 0]}% @@ -7883,7 +8002,7 @@ end \printedrefname \fi % - % if the user also gave the printed manual name (fifth arg), append + % If the user also gave the printed manual name (fifth arg), append % "in MANUALNAME". \ifdim \wd\printedmanualbox > 0pt \space \putwordin{} \cite{\printedmanual}% @@ -7898,32 +8017,20 @@ end % this is a loss. Therefore, we give the text of the node name % again, so it is as if TeX is seeing it for the first time. % - % Cross-manual reference. Only include the "Section ``foo'' in" if - % the foo is neither missing or Top. Thus, @xref{,,,foo,The Foo Manual} - % outputs simply "see The Foo Manual". \ifdim \wd\printedmanualbox > 0pt - % What is the 7sp about? The idea is that we also want to omit - % the Section part if we would be printing "Top", since they are - % clearly trying to refer to the whole manual. But, this being - % TeX, we can't easily compare strings while ignoring the possible - % spaces before and after in the input. By adding the arbitrary - % 7sp, we make it much less likely that a real node name would - % happen to have the same width as "Top" (e.g., in a monospaced font). - % I hope it will never happen in practice. + % Cross-manual reference with a printed manual name. % - % For the same basic reason, we retypeset the "Top" at every - % reference, since the current font is indeterminate. + \crossmanualxref{\cite{\printedmanual\unskip}}% + % + \else\ifdim \wd\infofilenamebox > 0pt + % Cross-manual reference with only an info filename (arg 4), no + % printed manual name (arg 5). This is essentially the same as + % the case above; we output the filename, since we have nothing else. % - \setbox\topbox = \hbox{Top\kern7sp}% - \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}% - \ifdim \wd2 > 7sp - \ifdim \wd2 = \wd\topbox \else - \putwordSection{} ``\printedrefname'' \putwordin{}\space - \fi - \fi - \cite{\printedmanual}% + \crossmanualxref{\code{\infofilename\unskip}}% + % \else - % Reference in this manual. + % Reference within this manual. % % _ (for example) has to be the character _ for the purposes of the % control sequence corresponding to the node, but it has to expand @@ -7944,11 +8051,37 @@ end % % output the `page 3'. \turnoffactive \putwordpage\tie\refx{#1-pg}{}% - \fi + \fi\fi \fi \endlink \endgroup} +% Output a cross-manual xref to #1. Used just above (twice). +% +% Only include the text "Section ``foo'' in" if the foo is neither +% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply +% "see The Foo Manual", the idea being to refer to the whole manual. +% +% But, this being TeX, we can't easily compare our node name against the +% string "Top" while ignoring the possible spaces before and after in +% the input. By adding the arbitrary 7sp below, we make it much less +% likely that a real node name would have the same width as "Top" (e.g., +% in a monospaced font). Hopefully it will never happen in practice. +% +% For the same basic reason, we retypeset the "Top" at every +% reference, since the current font is indeterminate. +% +\def\crossmanualxref#1{% + \setbox\toprefbox = \hbox{Top\kern7sp}% + \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}% + \ifdim \wd2 > 7sp % nonempty? + \ifdim \wd2 = \wd\toprefbox \else % same as Top? + \putwordSection{} ``\printedrefname'' \putwordin{}\space + \fi + \fi + #1% +} + % This macro is called from \xrefX for the `[nodename]' part of xref % output. It's a separate macro only so it can be changed more easily, % since square brackets don't work well in some documents. Particularly @@ -8316,7 +8449,7 @@ end it from ftp://tug.org/tex/epsf.tex.} % \def\image#1{% - \ifx\epsfbox\thisiundefined + \ifx\epsfbox\thisisundefined \ifwarnednoepsf \else \errhelp = \noepsfhelp \errmessage{epsf.tex not found, images will be ignored}% @@ -8340,6 +8473,13 @@ end % If the image is by itself, center it. \ifvmode \imagevmodetrue + \else \ifx\centersub\centerV + % for @center @image, we need a vbox so we can have our vertical space + \imagevmodetrue + \vbox\bgroup % vbox has better behavior than vtop herev + \fi\fi + % + \ifimagevmode \nobreak\medskip % Usually we'll have text after the image which will insert % \parskip glue, so insert it here too to equalize the space @@ -8349,9 +8489,13 @@ end \fi % % Leave vertical mode so that indentation from an enclosing - % environment such as @quotation is respected. On the other hand, if - % it's at the top level, we don't want the normal paragraph indentation. - \noindent + % environment such as @quotation is respected. + % However, if we're at the top level, we don't want the + % normal paragraph indentation. + % On the other hand, if we are in the case of @center @image, we don't + % want to start a paragraph, which will create a hsize-width box and + % eradicate the centering. + \ifx\centersub\centerV\else \noindent \fi % % Output the image. \ifpdf @@ -8363,7 +8507,10 @@ end \epsfbox{#1.eps}% \fi % - \ifimagevmode \medskip \fi % space after the standalone image + \ifimagevmode + \medskip % space after a standalone image + \fi + \ifx\centersub\centerV \egroup \fi \endgroup} @@ -9866,22 +10013,26 @@ directory should work if nowhere else does.} @gdef@otherbackslash{@let\=@realbackslash} % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of -% the literal character `\'. -% -@def@normalturnoffactive{% - @let"=@normaldoublequote - @let$=@normaldollar %$ font-lock fix - @let+=@normalplus - @let<=@normalless - @let>=@normalgreater - @let\=@normalbackslash - @let^=@normalcaret - @let_=@normalunderscore - @let|=@normalverticalbar - @let~=@normaltilde - @markupsetuplqdefault - @markupsetuprqdefault - @unsepspaces +% the literal character `\'. Also revert - to its normal character, in +% case the active - from code has slipped in. +% +{@catcode`- = @active + @gdef@normalturnoffactive{% + @let-=@normaldash + @let"=@normaldoublequote + @let$=@normaldollar %$ font-lock fix + @let+=@normalplus + @let<=@normalless + @let>=@normalgreater + @let\=@normalbackslash + @let^=@normalcaret + @let_=@normalunderscore + @let|=@normalverticalbar + @let~=@normaltilde + @markupsetuplqdefault + @markupsetuprqdefault + @unsepspaces + } } % Make _ and + \other characters, temporarily. |