Coordinate IPv6 definitions for Linux and glibc

This change synchronizes the glibc headers with the Linux kernel
headers and arranges to coordinate the definition of structures
already defined the Linux kernel UAPI headers.

It is now safe to include glibc's netinet/in.h or Linux's linux/in6.h
in any order in a userspace application and you will get the same
ABI. The ABI is guaranteed by UAPI and glibc.

3 files changed, 64 insertions, 29 deletions

diff --git a/ChangeLog b/ChangeLog
index 2403463..70de523 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,15 @@
+2013-09-05  Carlos O'Donell  <carlos@redhat.com>
+	    Cong Wang  <amwang@redhat.com>
+
+	* sysdeps/unix/sysv/linux/bits/in.h
+	[_UAPI_LINUX_IN6_H]: Define __USE_KERNEL_IPV6_DEFS.
+	* inet/netinet/in.h: Move in_addr definition and bits/in.h inclusion
+	before __USE_KERNEL_IPV6_DEFS uses.
+	* inet/netinet/in.h [!__USE_KERNEL_IPV6_DEFS]: Define IPPROTO_MH, and
+	IPPROTO_BEETPH.
+	[__USE_KERNEL_IPV6_DEFS]: Don't define any of IPPROTO_*, in6_addr,
+	sockaddr_in6, or ipv6_mreq.
+
 2013-09-05  Adhemerval Zanella  <azanella@linux.vnet.ibm.com>
 
 	* sysdeps/powerpc/powerpc32/power7/memrchr.S (__memrchr): Fix invalid
diff --git a/inet/netinet/in.h b/inet/netinet/in.h
index 89e3813..05c77e2 100644
--- a/inet/netinet/in.h
+++ b/inet/netinet/in.h
@@ -26,13 +26,21 @@
 
 __BEGIN_DECLS
 
+/* Internet address.  */
+typedef uint32_t in_addr_t;
+struct in_addr
+  {
+    in_addr_t s_addr;
+  };
+
+/* Get system-specific definitions.  */
+#include <bits/in.h>
+
 /* Standard well-defined IP protocols.  */
 enum
   {
     IPPROTO_IP = 0,	   /* Dummy protocol for TCP.  */
 #define IPPROTO_IP		IPPROTO_IP
-    IPPROTO_HOPOPTS = 0,   /* IPv6 Hop-by-Hop options.  */
-#define IPPROTO_HOPOPTS		IPPROTO_HOPOPTS
     IPPROTO_ICMP = 1,	   /* Internet Control Message Protocol.  */
 #define IPPROTO_ICMP		IPPROTO_ICMP
     IPPROTO_IGMP = 2,	   /* Internet Group Management Protocol. */
@@ -55,10 +63,6 @@ enum
 #define IPPROTO_DCCP		IPPROTO_DCCP
     IPPROTO_IPV6 = 41,     /* IPv6 header.  */
 #define IPPROTO_IPV6		IPPROTO_IPV6
-    IPPROTO_ROUTING = 43,  /* IPv6 routing header.  */
-#define IPPROTO_ROUTING		IPPROTO_ROUTING
-    IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header.  */
-#define IPPROTO_FRAGMENT	IPPROTO_FRAGMENT
     IPPROTO_RSVP = 46,	   /* Reservation Protocol.  */
 #define IPPROTO_RSVP		IPPROTO_RSVP
     IPPROTO_GRE = 47,	   /* General Routing Encapsulation.  */
@@ -67,14 +71,10 @@ enum
 #define IPPROTO_ESP		IPPROTO_ESP
     IPPROTO_AH = 51,       /* authentication header.  */
 #define IPPROTO_AH		IPPROTO_AH
-    IPPROTO_ICMPV6 = 58,   /* ICMPv6.  */
-#define IPPROTO_ICMPV6		IPPROTO_ICMPV6
-    IPPROTO_NONE = 59,     /* IPv6 no next header.  */
-#define IPPROTO_NONE		IPPROTO_NONE
-    IPPROTO_DSTOPTS = 60,  /* IPv6 destination options.  */
-#define IPPROTO_DSTOPTS		IPPROTO_DSTOPTS
     IPPROTO_MTP = 92,	   /* Multicast Transport Protocol.  */
 #define IPPROTO_MTP		IPPROTO_MTP
+    IPPROTO_BEETPH = 94,   /* IP option pseudo header for BEET.  */
+#define IPPROTO_BEETPH		IPPROTO_BEETPH
     IPPROTO_ENCAP = 98,	   /* Encapsulation Header.  */
 #define IPPROTO_ENCAP		IPPROTO_ENCAP
     IPPROTO_PIM = 103,	   /* Protocol Independent Multicast.  */
@@ -90,6 +90,28 @@ enum
     IPPROTO_MAX
   };
 
+/* If __USER_KERNEL_IPV6_DEFS is defined then the user has included the kernel
+   network headers first and we should use those ABI-identical definitions
+   instead of our own.  */
+#ifndef __USE_KERNEL_IPV6_DEFS
+enum
+  {
+    IPPROTO_HOPOPTS = 0,   /* IPv6 Hop-by-Hop options.  */
+#define IPPROTO_HOPOPTS		IPPROTO_HOPOPTS
+    IPPROTO_ROUTING = 43,  /* IPv6 routing header.  */
+#define IPPROTO_ROUTING		IPPROTO_ROUTING
+    IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header.  */
+#define IPPROTO_FRAGMENT	IPPROTO_FRAGMENT
+    IPPROTO_ICMPV6 = 58,   /* ICMPv6.  */
+#define IPPROTO_ICMPV6		IPPROTO_ICMPV6
+    IPPROTO_NONE = 59,     /* IPv6 no next header.  */
+#define IPPROTO_NONE		IPPROTO_NONE
+    IPPROTO_DSTOPTS = 60,  /* IPv6 destination options.  */
+#define IPPROTO_DSTOPTS		IPPROTO_DSTOPTS
+    IPPROTO_MH = 135,      /* IPv6 mobility header.  */
+#define IPPROTO_MH		IPPROTO_MH
+  };
+#endif /* !__USE_KERNEL_IPV6_DEFS */
 
 /* Type to represent a port.  */
 typedef uint16_t in_port_t;
@@ -134,15 +156,6 @@ enum
     IPPORT_USERRESERVED = 5000
   };
 
-
-/* Internet address.  */
-typedef uint32_t in_addr_t;
-struct in_addr
-  {
-    in_addr_t s_addr;
-  };
-
-
 /* Definitions of the bits in an Internet address integer.
 
    On subnets, host and network parts are found according to
@@ -191,7 +204,7 @@ struct in_addr
 #define INADDR_ALLRTRS_GROUP    ((in_addr_t) 0xe0000002) /* 224.0.0.2 */
 #define INADDR_MAX_LOCAL_GROUP  ((in_addr_t) 0xe00000ff) /* 224.0.0.255 */
 
-
+#ifndef __USE_KERNEL_IPV6_DEFS
 /* IPv6 address */
 struct in6_addr
   {
@@ -209,6 +222,7 @@ struct in6_addr
 # define s6_addr32		__in6_u.__u6_addr32
 #endif
   };
+#endif /* !__USE_KERNEL_IPV6_DEFS */
 
 extern const struct in6_addr in6addr_any;        /* :: */
 extern const struct in6_addr in6addr_loopback;   /* ::1 */
@@ -233,6 +247,7 @@ struct sockaddr_in
 			   sizeof (struct in_addr)];
   };
 
+#ifndef __USE_KERNEL_IPV6_DEFS
 /* Ditto, for IPv6.  */
 struct sockaddr_in6
   {
@@ -242,7 +257,7 @@ struct sockaddr_in6
     struct in6_addr sin6_addr;	/* IPv6 address */
     uint32_t sin6_scope_id;	/* IPv6 scope-id */
   };
-
+#endif /* !__USE_KERNEL_IPV6_DEFS */
 
 #if defined __USE_MISC || defined __USE_GNU
 /* IPv4 multicast request.  */
@@ -268,7 +283,7 @@ struct ip_mreq_source
   };
 #endif
 
-
+#ifndef __USE_KERNEL_IPV6_DEFS
 /* Likewise, for IPv6.  */
 struct ipv6_mreq
   {
@@ -278,7 +293,7 @@ struct ipv6_mreq
     /* local interface */
     unsigned int ipv6mr_interface;
   };
-
+#endif /* !__USE_KERNEL_IPV6_DEFS */
 
 #if defined __USE_MISC || defined __USE_GNU
 /* Multicast group request.  */
@@ -349,10 +364,6 @@ struct group_filter
 				      * sizeof (struct sockaddr_storage)))
 #endif
 
-
-/* Get system-specific definitions.  */
-#include <bits/in.h>
-
 /* Functions to convert between host and network byte order.
 
    Please note that these functions normally take `unsigned long int' or
diff --git a/sysdeps/unix/sysv/linux/bits/in.h b/sysdeps/unix/sysv/linux/bits/in.h
index e959b33..d763ce9 100644
--- a/sysdeps/unix/sysv/linux/bits/in.h
+++ b/sysdeps/unix/sysv/linux/bits/in.h
@@ -21,6 +21,18 @@
 # error "Never use <bits/in.h> directly; include <netinet/in.h> instead."
 #endif
 
+/* If the application has already included linux/in6.h from a linux-based
+   kernel then we will not define the IPv6 IPPROTO_* defines, in6_addr (nor the
+   defines), sockaddr_in6, or ipv6_mreq.  The ABI used by the linux-kernel and
+   glibc match exactly.  Neither the linux kernel nor glibc should break this
+   ABI without coordination.  */
+#ifdef _UAPI_LINUX_IN6_H
+/* This is not quite the same API since the kernel always defines s6_addr16 and
+   s6_addr32. This is not a violation of POSIX since POSIX says "at least the
+   following member" and that holds true.  */
+# define __USE_KERNEL_IPV6_DEFS
+#endif
+
 /* Options for use with `getsockopt' and `setsockopt' at the IP level.
    The first word in the comment at the right is the data type used;
    "bool" means a boolean value stored in an `int'.  */