aboutsummaryrefslogtreecommitdiff
path: root/sim/mn10300/aclocal.m4
AgeCommit message (Collapse)AuthorFilesLines
2022-11-07sim: mn10300: drop subdir configure logicMike Frysinger1-16/+0
We've been using this only to set the default word size to 32. We can easily move this into the makefile via a -D compiler flag and clean up the build logic quite a bit.
2021-07-01sim: unify reserved instruction bits settingsMike Frysinger1-1/+0
Move these options up to the common dir so we only test & export them once across all ports. The setting only affects igen based ports, and they were turning this on by default, so keep the default in place.
2021-06-21sim: unify hardware settingsMike Frysinger1-1/+0
Move these options up to the common dir so we only test & export them once across all ports.
2021-06-20sim: delete SIM_AC_COMMON macroMike Frysinger1-1/+0
Now that we've moved all content out to the common file, this is empty and can be deleted it entirely.
2021-06-20sim: unify general maintainer settingsMike Frysinger1-87/+0
Move these options up to the common dir so we only test & export them once across all ports. This takes a page from the cgen maint logic to make $(MAINT) work for non-automake Makefiles which will allow us to merge it together.
2021-06-20sim: move sim-inline to the common codeMike Frysinger1-1/+0
This will allow us to build the common code with the same inline settings as the arch subdirs, and only do the test once.
2021-06-19sim: unify gettext/intl probing logicMike Frysinger1-1/+0
Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19sim: unify toolchain dependency logicMike Frysinger1-2/+0
The common dir is already probing this info since it's using automake, so pass it down to the subdirs so they don't have to probe it at all.
2021-06-19sim: unify toolchain probing logicMike Frysinger1-1/+0
Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19sim: unify bfd library dependency testing logicMike Frysinger1-7/+0
Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18sim: unify -Werror build settingsMike Frysinger1-1/+0
Move these options up to the common dir so we only test & export them once across all ports. It also enables -Werror usage on the common files we've been pulling out of arch subdirs.
2021-06-17sim: overhaul & unify endian settings managementMike Frysinger1-1/+0
The m4 macro has 2 args: the "wire" settings (which represents the hardwired port behavior), and the default settings (which are used if nothing else is specified). If none are specified, the arch is expected to support both, and the value will be probed based on the user runtime options or the input program. Only two arches today set the default value (bpf & mips). We can probably let this go as it only shows up in one scenario: the sim is invoked, but with no inputs, and no user endian selection. This means bpf will not behave like the other arches: an error is shown and forces the user to make a choice. If an input program is used though, we'll still switch the default to that. This allows us to remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting. For the ports that set a "wire" endian, move it to the runtime init of the respective sim_open calls. This allows us to change the WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting if they want to force a specific endianness. With all the endian logic moved to runtime selection, we can move the configure call up to the common dir so we only process it once across all ports. The ppc arch was picking the wire endian based on the target used, but since we weren't doing that for other biendian arches, we can let this go too. We'll rely on the input selecting the endian, or make the user decide.
2021-06-12sim: overhaul alignment settings managementMike Frysinger1-1/+0
Currently, the sim-config module will abort if alignment settings haven't been specified by the port's configure.ac. This is a bit weird when we've allowed SIM_AC_OPTION_ALIGNMENT to seem like it's optional to use. Thus everyone invokes it. There are 4 alignment settings, but really only 2 matters: strict and nonstrict. The "mixed" setting is just the default ("unset"), and "forced" isn't used directly by anyone (it's available as a runtime option for some ports). The m4 macro has 2 args: the "wire" settings (which represents the hardwired port behavior), and the default settings (which are used if nothing else is specified). If none are specified, then the build won't work (see above as if SIM_AC_OPTION_ALIGNMENT wasn't called). If default settings are provided, then that is used, but we allow the user to override at runtime. Otherwise, the "wire" settings are used and user runtime options to change are ignored. Most ports specify a default, or set the "wire" to nonstrict. A few set "wire" to strict, but it's not clear that's necessary as it doesn't make the code behavior, by default, any different. It might make things a little faster, but we should provide the user the choice of the compromises to make: force a specific mode at compile time for faster runtime, or allow the choice at runtime. More likely it seems like an oversight when these ports were initially created, and/or copied & pasted from existing ports. With all that backstory, let's get to what this commit does. First kill off the idea of a compile-time default alignment and set it to nonstrict in the common code. For any ports that want strict alignment by default, that code is moved to sim_open while initializing the sim. That means WITH_DEFAULT_ALIGNMENT can be completely removed. Moving the default alignment to the runtime also allows removal of setting the "wire" settings at configure time. Which allows removing of all arguments to SIM_AC_OPTION_ALIGNMENT and moving that call to common code. The macro logic can be reworked to not pass WITH_ALIGNMENT as -D CPPFLAG and instead move it to config.h. All of these taken together mean we can hoist the macro up to the top level and share it among all sims so behavior is consistent among all the ports.
2021-06-12sim: unify bug & package settingsMike Frysinger1-1/+0
Move these options up to the common dir so we only test & export them once across all ports. The AC_INIT macro does a lot of the heavy lifting already which allows further simplification.
2021-06-12sim: unify environment build settingsMike Frysinger1-1/+0
Move the --sim-enable-environment option up to the common dir so we only test & export it once across all ports.
2021-06-12sim: unify assert build settingsMike Frysinger1-1/+0
Move the --sim-enable-assert option up to the common dir so we only test & export it once across all ports.
2021-04-21sim: regen against sim/m4/Mike Frysinger1-12/+12
My scripts weren't updated to use new -I../m4 as the first arg.
2021-04-02sim: unify toolchain settingsMike Frysinger1-0/+1
The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.
2021-02-21sim: common: split up acinclude.m4 into individual m4 filesMike Frysinger1-1/+11
This file is quite large and is getting unmanageable. Split it apart to follow aclocal best practices by putting one-macro-per-file. There shouldn't be any real functional changes here as can be seen in the configure script regens.
2021-02-13sim: switch to AC_CONFIG_MACRO_DIRSMike Frysinger1-19/+13
Rather than hand maintain m4 includes in various autotool files, use AC_CONFIG_MACRO_DIRS to declare the relevant search paths. This simplifies the code, makes it more robust, and cleans out unused logic from configure.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-30/+20
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2015-03-14sim: drop duplicate header checksMike Frysinger1-9/+8
The SIM_AC_COMMON macro already checks for a bunch of headers, so specific sim ports need not do it themselves.
2013-06-05sim: use AM_MAINTAINER_MODEMike Frysinger1-0/+40
I noticed the sim code is using an old implementation of the maintainer logic. I cut it over to the new macro (like gdb has been doing). In practice, it makes no difference currently as nothing in the sim tree uses it, but I have a follow up commit for the Blackfin tree that needs it.
2012-03-24[PATCH] sim: make sure to include strsignal prototypeMike Frysinger1-5/+6
Before POSIX standardized strsignal(), old systems would hide the prototype unless the normal extension defines were enabled. So use the AC_USE_SYSTEM_EXTENSIONS helper for that. Then make sure we include string.h ourselves in nrun.c rather than relying on implicit includes via other sim headers. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-03sim: generate build dependencies on the flyMike Frysinger1-0/+89
Lift the code that GDB is using to generate dependencies on the fly and port it over to the sim. Now people shouldn't have to manually maintain these in their Makefile's. Signed-off-by: Mike Frysinger <vapier@gentoo.org>