aboutsummaryrefslogtreecommitdiff
path: root/opcodes
AgeCommit message (Collapse)AuthorFilesLines
2016-06-14[ARC] Add arithmetic and logic instructions for npsGraham Markall3-1/+293
This commit completes the implementation of arithmetic and logic instructions for the NPS-400. These instructions are: - calcbsd / calcbxd - calckey / calcxkey - mxb / imxb - addl, subl, orl, andl, xorl - andab / orab - lbdsize - bdlen - csms, csma, cbba - zncv - hofs
2016-06-10S/390: Dump unknown instructions according to their length.Andreas Krebbel2-17/+48
Unknown instructions are currently just dumped as .long 1234. On S/390 we can do a bit better since the instruction length is encoded in the opcode. That way also unknown instructions can be skipped according to their real length. That way we can continue correctly after that instruction. However, there are also some drawbacks with that behavior when dumping data. So for now that behavior is only enabled for text section but even there it might mess things up when having a literal pool embedded in the code. Therefore I've left the feature disabled by default and have added the -Minsnlength option to enable it explicitely. opcodes/ChangeLog: 2016-06-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * s390-dis.c (option_use_insn_len_bits_p): New file scope variable. (init_disasm): Handle new command line option "insnlength". (print_s390_disassembler_options): Mention new option in help output. (print_insn_s390): Use the encoded insn length when dumping unknown instructions.
2016-06-09Print symbol names in comments for LDS/STS disassembly.Denis Chertykov2-4/+15
This patch adds default data address space origin (0x800000) to the symbol addresses. when disassemble lds/sts instructions. So that symbol names shall be printed in comments for lds/sts instructions disassemble. ld/ * testsuite/ld-avr/lds-mega.d: New test. * testsuite/ld-avr/lds-mega.s: New test source. * testsuite/ld-avr/lds-tiny.d: New test. * testsuite/ld-avr/lds-tiny.s: New test source. opcodes/ * avr-dis.c (avr_operand): Add default data address space origin (0x800000) to the address and set as symbol address for LDS/ STS immediate operands.
2016-06-07PowerPC VLEAlan Modra3-3666/+3678
VLE is an encoding, not a particular processor architecture, so it isn't really proper to select insns based on PPC_OPCODE_VLE. For example {"evaddw", VX (4, 512), VX_MASK, PPCSPE|PPCVLE, PPCNONE, {RS, RA, RB}}, {"vaddubs", VX (4, 512), VX_MASK, PPCVEC|PPCVLE, PPCNONE, {VD, VA, VB}}, shows two insns that have the same encoding, both available with VLE. Enabling both with VLE means we can't disassemble the second variant even if -Maltivec is given rather than -Mspe. Also, we don't check user assembly against the processor type as well as we could. Another problem is that when using the VLE encoding, insns from the main ppc opcode table are not available, except those using opcode 4 and 31. Correcting this revealed two errors in the ld testsuite, use of "nop" and "rfmci" when -mvle. This patch fixes those problems in the opcode table, and removes PPCNONE. I find a plain 0 distracts less from other values. In addition, I've implemented code to recognize some machine values from the apuinfo note present in ppc32 objects. It's not a complete disambiguation since we're lacking info to detect newer chips, but what we have should help with disassembly. include/ * elf/ppc.h (APUINFO_SECTION_NAME, APUINFO_LABEL, PPC_APUINFO_ISEL, PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE: Define. opcodes/ * ppc-dis.c (ppc_opts): Delete extraneous parentheses. Default cpu for "vle" to e500. * ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE. (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise. (PPCNONE): Delete, substitute throughout. (powerpc_opcodes): Remove PPCVLE from "flags". Add to "deprecated" except for major opcode 4 and 31. (vle_opcodes <se_rfmci>): Add PPCRFMCI to flags. bfd/ * cpu-powerpc.c (powerpc_compatible): Allow bfd_mach_ppc_vle entry to match other 32-bit archs. * elf32-ppc.c (_bfd_elf_ppc_set_arch): New function. (ppc_elf_object_p): Call it. (ppc_elf_special_sections): Use APUINFO_SECTION_NAME. Fix overlong line. (APUINFO_SECTION_NAME, APUINFO_LABEL): Don't define here. * elf64-ppc.c (ppc64_elf_object_p): Call _bfd_elf_ppc_set_arch. * bfd-in.h (_bfd_elf_ppc_at_tls_transform, _bfd_elf_ppc_at_tprel_transform): Move to.. * elf-bfd.h: ..here. (_bfd_elf_ppc_set_arch): Declare. * bfd-in2.h: Regenerate. gas/ * config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define. (ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden by vle_opcodes, and that vle flag doesn't enable opcodes. Don't add vle_opcodes twice. (ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL. ld/ * testsuite/ld-powerpc/apuinfo1.s: Delete nop. * testsuite/ld-powerpc/apuinfo-vle2.s: New. * testsuite/ld-powerpc/powerpc.exp: Use apuinfo-vle2.s.
2016-06-07[ARM] Add command line option for RAS extension.Matthew Wahab2-2/+7
This patch adds the architecture extension "+ras" to enable RAS support. It is enabled by default for -march=armv8.2-a and available but disabled by default for armv8-a and armv8.1-a. gas/ * config/tc-arm.c (arm_ext_v8_2): Rename to arm_ext_ras. (arm_ext_ras): Renamed from arm_ext_v8_2. (insns): Update for arm_ext_v8_2 renaming. (arm_extensions): Add "ras". * doc/c-arm.texi (ARM Options): Add an entry for "ras". * testsuite/gas/arm/armv8-a+ras.d: New. * testsuite/gas/arm/armv8_2-a.d: Add explicit command line options. include/ * opcode/arm.h (ARM_EXT2_RAS): New. Also align preceding entries. (ARM_AEXT_V8_2A): Add ARM_EXT2_RAS. opcodes/ * arm-dis.c (arm_opcodes): Replace ARM_EXT_V8_2A with ARM_EXT_RAS in relevant entries.
2016-06-03Re-add support for lbarx, lharx, stbcx. and sthcx. insns back to the E6500 cpu.Peter Bergner2-4/+10
opcodes/ PR binutils/20196 * ppc-opc.c (powerpc_opcodes <lbarx, lharx, stbcx., sthcx.>): Enable opcodes for E6500. gas/ PR binutils/20196 * gas/testsuite/gas/ppc/e6500.s <lbarx, lharx, lwarx, ldarx, stbcx., sthcx., stwcx., stdcx.>: Add tests. * gas/testsuite/gas/ppc/e6500.d: Likewise. * gas/testsuite/gas/ppc/power8.s: Likewise. * gas/testsuite/gas/ppc/power8.d: Likewise. * gas/testsuite/gas/ppc/power4.s <lwarx, ldarx, stwcx., stdcx.>: Add tests. * gas/testsuite/gas/ppc/power4.d: Likewise.
2016-06-03Handle indirect branches for AMD64 and Intel64H.J. Lu4-7/+75
AMD64 spec and Intel64 spec differ in indirect branches in 64-bit mode. AMD64 supports indirect branches with 16-bit address via the data size prefix while the data size prefix is ignored by Intel64. gas/ PR binutis/18386 * testsuite/gas/i386/i386.exp: Run x86-64-branch-4. * testsuite/gas/i386/x86-64-branch.d: Updated. * testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise. * testsuite/gas/i386/x86-64-branch-4.l: New file. * testsuite/gas/i386/x86-64-branch-4.s: Likewise. opcodes/ PR binutis/18386 * i386-dis.c (indirEv): Replace stack_v_mode with indir_v_mode. (indir_v_mode): New. Add comments for '&'. (reg_table): Replace "{T|}" with "{&|}" on call and jmp. (putop): Handle '&'. (intel_operand_size): Handle indir_v_mode. (OP_E_register): Likewise. * i386-opc.tbl: Mark 64-bit indirect call/jmp as AMD64. Add 64-bit indirect call/jmp for AMD64. * i386-tbl.h: Regenerated
2016-06-02Add support for 48 and 64 bit ARC instructions.Andrew Burgess4-93/+722
gas * config/tc-arc.c (parse_opcode_flags): New function. (find_opcode_match): Move flag parsing code out to new function. Ignore operands marked IGNORE. (build_fake_opcode_hash_entry): New function. (find_special_case_long_opcode): New function. (find_special_case): Lookup long opcodes. * testsuite/gas/arc/nps400-7.d: New file. * testsuite/gas/arc/nps400-7.s: New file. include * opcode/arc.h (MAX_INSN_ARGS): Increase to 16. (struct arc_long_opcode): New structure. (arc_long_opcodes): Declare. (arc_num_long_opcodes): Declare. opcodes * arc-dis.c (struct arc_operand_iterator): New structure. (find_format_from_table): All the old content from find_format, with some minor adjustments, and parameter renaming. (find_format_long_instructions): New function. (find_format): Rewritten. (arc_insn_length): Add LSB parameter. (extract_operand_value): New function. (operand_iterator_next): New function. (print_insn_arc): Use new functions to find opcode, and iterator over operands. * arc-opc.c (insert_nps_3bit_dst_short): New function. (extract_nps_3bit_dst_short): New function. (insert_nps_3bit_src2_short): New function. (extract_nps_3bit_src2_short): New function. (insert_nps_bitop1_size): New function. (extract_nps_bitop1_size): New function. (insert_nps_bitop2_size): New function. (extract_nps_bitop2_size): New function. (insert_nps_bitop_mod4_msb): New function. (extract_nps_bitop_mod4_msb): New function. (insert_nps_bitop_mod4_lsb): New function. (extract_nps_bitop_mod4_lsb): New function. (insert_nps_bitop_dst_pos3_pos4): New function. (extract_nps_bitop_dst_pos3_pos4): New function. (insert_nps_bitop_ins_ext): New function. (extract_nps_bitop_ins_ext): New function. (arc_operands): Add new operands. (arc_long_opcodes): New global array. (arc_num_long_opcodes): New global. * arc-nps400-tbl.h: Add comments referencing arc_long_opcodes.
2016-06-01add more extern CTrevor Saunders3-0/+21
opcodes/ChangeLog: 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * nds32-asm.h: Add extern "C". * sh-opc.h: Likewise. bfd/ChangeLog: 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * elf32-hppa.h: Add extern "C". * elf32-nds32.h: Likewise. * elf32-tic6x.h: Likewise. include/ChangeLog: 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * elf/mips.h: Likewise. * elf/sh.h: Likewise. * opcode/d10v.h: Likewise. * opcode/d30v.h: Likewise. * opcode/ia64.h: Likewise. * opcode/mips.h: Likewise. * opcode/ppc.h: Likewise. * opcode/sparc.h: Likewise. * opcode/tic6x.h: Likewise. * opcode/v850.h: Likewise.
2016-06-01Add support for some variants of the ARC nps400 rflt instruction.Graham Markall2-5/+19
gas * testsuite/gas/arc/nps-400-1.s: Add rflt variants with operands of types a,b,u6, 0,b,u6, and 0,b,limm. * testsuite/gas/arc/nps-400-1.d: Likewise. opcodes * arc-nps400-tbl.h: Add operands a,b,u6, 0,b,u6, and 0,b,limm to the rflt instruction.
2016-05-31sh: make constant unsigned to avoid narrowingTrevor Saunders2-1/+6
Shifting into the sign bit of a 32 bit int and then converting to a unsigned type is less straight forward than just shifting an unsigned value. opcodes/ChangeLog: 2016-05-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * sh-opc.h (ARCH_SH_HAS_DSP): Make the shifted value an unsigned constant.
2016-05-29Add missing ChangeLog entriesH.J. Lu1-0/+10
2016-05-29Add .noavx512XX directives to x86 assemblerH.J. Lu2-0/+81
Add .noavx512f, .noavx512cd, .noavx512er, .noavx512pf, .noavx512dq, .noavx512bw, .noavx512vl, .noavx512ifma, .noavx512vbmi directives to x86 assembler. gas/ PR gas/20145 * config/tc-i386.c (cpu_noarch): Add noavx512f, noavx512cd, noavx512er, noavx512pf, noavx512dq, noavx512bw, noavx512vl, noavx512ifma and noavx512vbmi. * doc/c-i386.texi: Mention noavx512f, noavx512cd, noavx512er, noavx512pf, noavx512dq, noavx512bw, noavx512vl, noavx512ifma and noavx512vbmi. * testsuite/gas/i386/i386.exp: Run noavx512-1 and noavx512-2. * testsuite/gas/i386/noavx512-1.l: New file. * testsuite/gas/i386/noavx512-1.s: Likewise. * testsuite/gas/i386/noavx512-2.l: Likewise. * testsuite/gas/i386/noavx512-2.s: Likewise. opcodes/ PR gas/20145 * i386-gen.c (cpu_flag_init): Add CPU_ANY_AVX512F_FLAGS, CPU_ANY_AVX512CD_FLAGS, CPU_ANY_AVX512ER_FLAGS, CPU_ANY_AVX512PF_FLAGS, CPU_ANY_AVX512DQ_FLAGS, CPU_ANY_AVX512BW_FLAGS, CPU_ANY_AVX512VL_FLAGS, CPU_ANY_AVX512IFMA_FLAGS and CPU_ANY_AVX512VBMI_FLAGS. * i386-init.h: Regenerated.
2016-05-27Update x86 CPU_XXX_FLAGS handlingH.J. Lu5-5452/+5631
Support defining CPU_XXX_FLAGS with other CPU_XXX_FLAGS. Update CPU_XXX_FLAGS to enable more bits like x87 and SYSCALL. Don't enable MMX when enabling SSE, AVX or AVX512. Don't disable AVX nor AVX512 when disabling SSE. Don't disable AVX512 when disabling AVX. Disable F16C, FMA, FMA4 and XOP when disabling AVX. Add 87, no287, no387, no687, nosse2, nosse3, nossse3, nosse4.1, nosse4.2, nosse4 and noavx2 directives to x86 assembler. TODO: Add more .noXXX, like .noavx512f, directives to x86 assembler. gas/ PR gas/20145 * config/tc-i386.c (cpu_arch): Add 687. (cpu_noarch): Add no287, no387, no687, nosse2, nosse3, nossse3, nosse4.1, nosse4.2, nosse4 and noavx2. (parse_real_register): Check cpuregmmx instead of cpummx for MMX register. Check cpuregxmm instead of cpusse for XMM register. Check cpuregymm instead of cpuavx for YMM register. Check cpuregzmm/cpuregmask instead of cpuavx512f for ZMMM/mask register. * doc/c-i386.texi: Mention 687, no287, no387, no687, nosse2, nosse3, nossse3, nosse4.1, nosse4.2, nosse4 and noavx2. * testsuite/gas/i386/arch-10-prefetchw.d (as): Add mmx. * testsuite/gas/i386/arch-10.d (as): Likewise. * testsuite/gas/i386/arch-11.s: Add ".arch .mmx". * testsuite/gas/i386/i386.exp: Pass mmx to assembler for arch-10-3 and arch-10-4. Run no87-3, nosse-4, nosse-5, noavx-3 and noavx-4. * testsuite/gas/i386/no87-3.l: New file. * testsuite/gas/i386/no87-3.s: Likewise. * testsuite/gas/i386/noavx-3.l: Likewise. * testsuite/gas/i386/noavx-3.s: Likewise. * testsuite/gas/i386/noavx-4.d: Likewise. * testsuite/gas/i386/noavx-4.s: Likewise. * testsuite/gas/i386/nosse-4.l: Likewise. * testsuite/gas/i386/nosse-4.s: Likewise. * testsuite/gas/i386/nosse-5.d: Likewise. * testsuite/gas/i386/nosse-5.s: Likewise. opcodes/ PR gas/20145 * i386-gen.c (cpu_flag_init): Update CPU_XXX_FLAGS. Remove CpuMMX from CPU_SSE_FLAGS. Remove AVX and AVX512 bits from CPU_ANY_SSE_FLAGS. Remove AVX512 bits from CPU_ANY_AVX_FLAGS. Add CPU_XSAVE_FLAGS to CPU_XSAVEOPT_FLAGS, CPU_XSAVE_FLAGS and CpuXSAVEC. Add CPU_AVX_FLAGS to CpuF16C. Remove CpuMMX from CPU_AVX512F_FLAGS, CPU_AVX512CD_FLAGS, CPU_AVX512ER_FLAGS, CPU_AVX512PF_FLAGS, CPU_AVX512DQ_FLAGS and CPU_AVX512BW_FLAGS. Add CPU_SSE2_FLAGS to CPU_SHA_FLAGS. Add CPU_ANY_287_FLAGS, CPU_ANY_387_FLAGS, CPU_ANY_687_FLAGS, CPU_ANY_SSE2_FLAGS, CPU_ANY_SSE3_FLAGS, CPU_ANY_SSSE3_FLAGS, CPU_ANY_SSE4_1_FLAGS, CPU_ANY_SSE4_2_FLAGS and CPU_ANY_AVX2_FLAGS. Enable CpuRegMMX for MMX. Enable CpuRegXMM for SSE, AVX and AVX512. Enable CpuRegYMM for AVX and AVX512VL, Enable CpuRegZMM and CpuRegMask for AVX512. (cpu_flags): Add CpuRegMMX, CpuRegXMM, CpuRegYMM, CpuRegZMM and CpuRegMask. (set_bitfield_from_cpu_flag_init): New function. (set_bitfield): Remove const on f. Call set_bitfield_from_cpu_flag_init to handle CPU_XXX_FLAGS. * i386-opc.h (CpuRegMMX): New. (CpuRegXMM): Likewise. (CpuRegYMM): Likewise. (CpuRegZMM): Likewise. (CpuRegMask): Likewise. (i386_cpu_flags): Add cpuregmmx, cpuregxmm, cpuregymm, cpuregzmm and cpuregmask. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2016-05-27Replace CpuAMD64/CpuIntel64 with AMD64/Intel64H.J. Lu6-10532/+10554
AMD64 vs CpuIntel64 ISA should be handled similar as AT&T vs Intel syntax. Since cpu_flags isn't sorted by position, we need to check the whole cpu_flags array for the maximum position when verifying CpuMax. gas/ PR gas/20154 * config/tc-i386.c (cpu_flags_match): Don't set cpuamd64 nor cpuintel64. (match_template): Check Intel64/AMD64 ISA. opcodes/ PR gas/20154 * i386-gen.c (cpu_flags): Remove CpuAMD64 and CpuIntel64. (opcode_modifiers): Add AMD64 and Intel64. (main): Properly verify CpuMax. * i386-opc.h (CpuAMD64): Removed. (CpuIntel64): Likewise. (CpuMax): Set to CpuNo64. (i386_cpu_flags): Remove cpuamd64 and cpuintel64. (AMD64): New. (Intel64): Likewise. (i386_opcode_modifier): Add amd64 and intel64. (i386-opc.tbl): Replace CpuAMD64/CpuIntel64 with AMD64/Intel64 on call and jmp. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2016-05-27Correct CpuMax in i386-opc.hH.J. Lu4-4/+20
CpuMax should be CpuIntel64, not CpuNo64. i386-gen.c is updated to verify that CpuMax is correct. X86 assembler is updated to properly set cpuamd64 and cpuintel64. gas/ PR gas/20154 * config/tc-i386.c (intel64): New. (cpu_flags_match): Set cpuamd64 and cpuintel64. (md_parse_option): Set intel64 instead of cpuamd64 and cpuintel64. opcodes/ PR gas/20154 * i386-gen.c (main): Fail if CpuMax is incorrect. * i386-opc.h (CpuMax): Set to CpuIntel64. * i386-tbl.h: Regenerated.
2016-05-27Improve the MSP430 disassembler's handling of memory read errors.Nick Clifton2-272/+408
PR target/20150 * msp430-dis.c (msp430dis_read_two_bytes): New function. (msp430dis_opcode_unsigned): New function. (msp430dis_opcode_signed): New function. (msp430_singleoperand): Use the new opcode reading functions. Only disassenmble bytes if they were successfully read. (msp430_doubleoperand): Likewise. (msp430_branchinstr): Likewise. (msp430x_callx_instr): Likewise. (print_insn_msp430): Check that it is safe to read bytes before attempting disassembly. Use the new opcode reading functions.
2016-05-26Add support for new POWER ISA 3.0 instructions.Peter Bergner2-0/+13
opcodes/ * ppc-opc.c (CY): New define. Document it. (powerpc_opcodes) <addex[.], lwzmx, vmsumudm>: New mnemonics. gas/ * testsuite/gas/ppc/altivec3.d <vmsumudm>: Add test. * testsuite/gas/ppc/altivec3.s: Likewise. * testsuite/gas/ppc/power9.d <addex[.], lwzmx, vmsumudm>: Add tests. * testsuite/gas/ppc/power9.s: Likewise.
2016-05-25Enable VREX for all AVX512 directivesH.J. Lu3-49/+58
Add all AVX512 bits to CPU_ANY_AVX_FLAGS. * i386-gen.c (cpu_flag_init): Add CpuVREX to CPU_AVX512DQ_FLAGS, CPU_AVX512BW_FLAGS, CPU_AVX512VL_FLAGS, CPU_AVX512IFMA_FLAGS and CPU_AVX512VBMI_FLAGS. Add CpuAVX512DQ, CpuAVX512BW, CpuAVX512VL, CpuAVX512IFMA and CpuAVX512VBMI to CPU_ANY_AVX_FLAGS. * i386-init.h: Regenerated.
2016-05-25Enable VREX for AVX512 directivesH.J. Lu3-8/+15
Enable VREX for AVX512 instructions with upper 16 vector registers. gas/ PR gas/20141 * testsuite/gas/i386/i386.exp: Run x86-64-pr20141. * testsuite/gas/i386/x86-64-pr20141.d: New file. * testsuite/gas/i386/x86-64-pr20141.s: Likewise. opcodes/ PR gas/20141 * i386-gen.c (cpu_flag_init): Add CpuVREX to CPU_AVX512F_FLAGS, CPU_AVX512CD_FLAGS, CPU_AVX512ER_FLAGS and CPU_AVX512PF_FLAGS. * i386-init.h: Regenerated.
2016-05-25Reimplement .no87/.nommx/.nosse/.noavx directivesH.J. Lu3-2/+17
Move all .noXXX directives to cpu_noarch. gas/ * config/tc-i386.c (arch_entry): Remove negated. (noarch_entry): New struct. (cpu_arch): Updated. Remove .no87, .nommx, .nosse and .noavx. (cpu_noarch): New. (set_cpu_arch): Check cpu_noarch after cpu_arch. (md_parse_option): Allow -march=+nosse. Check cpu_noarch after cpu_arch. (output_message): New function. (show_arch): Use it. Handle cpu_noarch. * testsuite/gas/i386/i386.exp: Run nommx-1, nommx-2, nommx-3, nosse-1, nosse-2, nosse-3, noavx-1 and noavx-2. * testsuite/gas/i386/noavx-1.l: New file. * testsuite/gas/i386/noavx-1.s: Likewise. * testsuite/gas/i386/noavx-2.s: Likewise. * testsuite/gas/i386/noavx-2.l: Likewise. * testsuite/gas/i386/nommx-1.s: Likewise. * testsuite/gas/i386/nommx-1.l: Likewise. * testsuite/gas/i386/nommx-2.s: Likewise. * testsuite/gas/i386/nommx-2.l: Likewise. * testsuite/gas/i386/nommx-3.s: Likewise. * testsuite/gas/i386/nommx-3.l: Likewise. * testsuite/gas/i386/nosse-1.s: Likewise. * testsuite/gas/i386/nosse-1.l: Likewise. * testsuite/gas/i386/nosse-2.s: Likewise. * testsuite/gas/i386/nosse-2.l: Likewise. * testsuite/gas/i386/nosse-3.s: Likewise. * testsuite/gas/i386/nosse-3.l: Likewise. opcodes/ * i386-gen.c (cpu_flag_init): Rename CPU_ANY87_FLAGS to CPU_ANY_X87_FLAGS. Add CPU_ANY_MMX_FLAGS. * i386-init.h: Regenerated.
2016-05-23[ARC] Update instruction type and delay slot info.Claudiu Zissulescu4-113/+144
This patch corrects the instructioninformation passed into the disassebler_info structure. include/ 2016-05-23 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (insn_subclass_t): Add COND. (flag_class_t): Add F_CLASS_EXTEND. opcodes/ 2016-05-23 Claudiu Zissulescu <claziss@synopsys.com> * arc-dis.c (print_flags): Set branch_delay_insns, and insn_type information. (print_insn_arc): Set insn_type information. * arc-opc.c (C_CC): Add F_CLASS_COND. * arc-tbl.h (bbit0, bbit1): Update subclass to COND. (beq_s, bge_s, bgt_s, bhi_s, bhs_s): Likewise. (ble_s, blo_s, bls_s, blt_s, bne_s): Likewise. (breq, breq_s, brge, brhs, brlo, brlt): Likewise. (brne, brne_s, jeq_s, jne_s): Likewise.
2016-05-23[ARC] Add XY registers, update neg instruction.Claudiu Zissulescu2-0/+7
gas/ 2016-05-23 Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (md_begin): Add XY registers. (cpu_types): Code density is default off for ARC EM. opcodes/ 2016-05-23 Claudiu Zissulescu <claziss@synopsys.com> * arc-tbl.h (neg): New instruction variant.
2016-05-23[ARC] Rename "class" named attributes.Claudiu Zissulescu3-5/+11
gas/ 2016-05-23 Cupertino Miranda <cmiranda@synopsys.com> * config/tc-arc.c (attributes_t): Renamed attribute class to attr_class. (find_opcode_match, assemble_insn, tokenize_extinsn): Changed. opcode/ 2016-05-23 Cupertino Miranda <cmiranda@synopsys.com> * arc-dis.c (find_format, find_format, get_auxreg) (print_insn_arc): Changed. * arc-ext.h (INSERT_XOP): Likewise. include/ 2016-05-23 Cupertino Miranda <cmiranda@synopsys.com> * opcode/arc.h (struct arc_opcode): Renamed attribute class to insn_class. (struct arc_flag_class): Renamed attribute class to flag_class.
2016-05-23tic54x: rename typedef of struct symbol_Trevor Saunders3-7/+12
generic gas code has a struct symbol, and tic54x typedefs a struct to symbol. This seems at least rather confusing, and it seems like target specific headers shouldn't put such generic names in the global namespace preventing other generic code from using them. opcodes/ChangeLog: 2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * tic54x-dis.c (sprint_mmr): Adjust. * tic54x-opc.c: Likewise. gas/ChangeLog: 2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * config/tc-tic54x.c (tic54x_mmregs): Adjust. (md_begin): Likewise. (encode_condition): Likewise. (encode_cc3): Likewise. (encode_cc2): Likewise. (encode_operand): Likewise. (tic54x_undefined_symbol): Likewise. include/ChangeLog: 2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * opcode/tic54x.h (struct symbol_): typedef to tic54x_symbol instead of plain symbol.
2016-05-19Correct "Fix powerpc subis range"Alan Modra2-1/+5
* ppc-opc.c (NSISIGNOPT): Use insert_nsi and extract_nsi.
2016-05-19Fix powerpc subis rangeAlan Modra2-12/+26
* ppc-opc.c: Formatting. (NSISIGNOPT): Define. (powerpc_opcodes <subis>): Use NSISIGNOPT.
2016-05-18MIPS/opcodes: Correct mixed MIPS16 and microMIPS disassemblyMaciej W. Rozycki2-17/+28
Mixing MIPS16 and microMIPS code in a single binary isn't usually supported but GAS happily produces such code if requested. However it is not correctly disassembled even if a symbol table is available and function symbols are correctly anotated with the ISA mode. This is because the ELF-header global microMIPS ASE flag takes precedence over MIPS16 function annotation, causing them to be treated as regular MIPS code. Correct the problem by respecting function symbol anotation regardless of the ELF-header flag. binutils/ * testsuite/binutils-all/mips/mixed-mips16-micromips.d: New test. * testsuite/binutils-all/mips/mixed-mips16-micromips.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new test. opcodes/ * mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand, replacing references to `micromips_ase' throughout. (_print_insn_mips): Don't use file-level microMIPS annotation to determine the disassembly mode with the symbol table.
2016-05-13Accept valid one byte signed and unsigned values for the IMM8 operand.Peter Bergner2-1/+5
opcodes/ * ppc-opc.c (IMM8): Use PPC_OPERAND_SIGNOPT. gas/ * testsuite/gas/ppc/power9.d <xxspltib>: Add additional operand tests. * testsuite/gas/ppc/power9.s: Likewise.
2016-05-11Add MIPS32 DSPr3 support.Matthew Fortune3-2/+11
bfd/ * elfxx-mips.c (print_mips_ases): Add DSPR3. binutils/ * readelf.c (print_mips_ases): Add DSPR3. gas/ * config/tc-mips.c (options): Add OPTION_DSPR3 and OPTION_NO_DSPR3. (md_longopts): Likewise. (md_show_usage): Add help for -mdspr3 and -mno-dspr3. (mips_ases): Define availability for DSPr3. (mips_ase_groups): Add ASE_DSPR3 to the DSP group. (mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3. * doc/as.texinfo: Document -mdspr3, -mno-dspr3. Fix -mdspr2 formatting. * doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and .set nodspr3. Fix -mdspr2 formatting. * testsuite/gas/mips/mips32-dspr3.d: New file. * testsuite/gas/mips/mips32-dspr3.s: Likewise. * testsuite/gas/mips/mips.exp: Run mips32-dspr3 test. include/ * elf/mips.h (AFL_ASE_DSPR3): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_DSPR3. * opcode/mips.h (ASE_DSPR3): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and mips64r6. * mips-opc.c (D34): New macro. (mips_builtin_opcodes): Define bposge32c for DSPr3.
2016-05-10Enable Intel RDPID instruction.Alexander Fomin7-5308/+5365
This patch enables Intel RDPID instruction described in Intel64 and IA-32 Architectures Software Developer's Manual, April 2016. gas/ * config/tc-i386.c (cpu_arch): Add RDPID. * doc/c-i386.texi: Document RDPID. gas/testsuite/ * gas/i386/i386.exp: Run RDPID tests. * gas/i386/prefix.d: Adjust. * gas/i386/rdpid.s: New test. * gas/i386/rdpid.d: Ditto. * gas/i386/rdpid-intel.d: Ditto. * gas/i386/x86-64-rdpid.s: Ditto. * gas/i386/x86-64-rdpid.d: Ditto. * gas/i386/x86-64-rdpid-intel.d: Ditto. opcodes/ * i386-dis.c (prefix_table): Add RDPID instruction. * i386-gen.c (cpu_flag_init): Add RDPID flag. (cpu_flags): Add RDPID bitfield. * i386-opc.h (enum): Add RDPID element. (i386_cpu_flags): Add RDPID field. * i386-opc.tbl: Add RDPID instruction. * i386-init.h: Regenerate. * i386-tbl.h: Regenerate.
2016-05-10Use getters/setters to access ARM branch typeThomas Preud'homme2-4/+11
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * elf32-arm.c (elf32_arm_size_stubs): Use new macros ARM_GET_SYM_BRANCH_TYPE and ARM_SET_SYM_BRANCH_TYPE to respectively get and set branch type of a symbol. (bfd_elf32_arm_process_before_allocation): Likewise. (elf32_arm_relocate_section): Likewise and fix identation along the way. (allocate_dynrelocs_for_symbol): Likewise. (elf32_arm_finish_dynamic_symbol): Likewise. (elf32_arm_swap_symbol_in): Likewise. (elf32_arm_swap_symbol_out): Likewise. gas/ * config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to set branch type of a symbol. gdb/ * arm-tdep.c (arm_elf_make_msymbol_special): Use ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol. include/ * arm.h (enum arm_st_branch_type): Add new ST_BRANCH_ENUM_SIZE enumerator. (NUM_ENUM_ARM_ST_BRANCH_TYPE_BITS): New macro. (ENUM_ARM_ST_BRANCH_TYPE_BITMASK): Likewise. (ARM_SYM_BRANCH_TYPE): Replace by ... (ARM_GET_SYM_BRANCH_TYPE): This and ... (ARM_SET_SYM_BRANCH_TYPE): This in two versions depending on whether BFD_ASSERT is defined or not. ld/ * emultempl/armelf.em (gld${EMULATION_NAME}_finish): Use ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol. opcodes/ * arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol. (print_insn): Likewise.
2016-05-10Add support for ARMv8-M security extensions instructionsThomas Preud'homme2-1/+29
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (arm_ext_m): Add feature bit ARM_EXT2_V8M_MAIN. (arm_ext_v8m_main): New feature set for bit ARM_EXT2_V8M_MAIN. (arm_ext_v8m_m_only): New feature set for instructions in ARMv8-M not shared with a non M profile architecture. (do_rn): New function. (known_t32_only_insn): Check opcode against arm_ext_v8m_m_only rather than arm_ext_v8m. (v7m_psrs): Add ARMv8-M security extensions new special registers. (insns): Add ARMv8-M Security Extensions instructions. (aeabi_set_public_attributes): Use arm_ext_v8m_m_only instead of arm_ext_v8m_m to decide the profile and the Thumb ISA. * testsuite/gas/arm/archv8m-cmse.s: New file. * testsuite/gas/arm/archv8m-cmse-main.s: Likewise.. * testsuite/gas/arm/archv8m-cmse-msr.s: Likewise. * testsuite/gas/arm/any-cmse.d: Likewise. * testsuite/gas/arm/any-cmse-main.d: Likewise. * testsuite/gas/arm/archv8m-cmse-base.d: Likewise. * testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise. * testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise. * testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise. * testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise. include/ * opcode/arm.h (ARM_EXT2_V8M_MAIN): new feature bit. (ARM_AEXT2_V8M_MAIN): New architecture extension feature set. (ARM_ARCH_V8M_MAIN): Use ARM_AEXT2_V8M_MAIN instead of ARM_AEXT2_V8M for the high core bits. opcodes/ * arm-dis.c (coprocessor_opcodes): Add entries for VFP ARMv8-M Mainline Security Extensions instructions. (thumb_opcodes): Add entries for narrow ARMv8-M Security Extensions instructions. (thumb32_opcodes): Add entries for wide ARMv8-M Security Extensions instructions. (psr_name): Add new MSP_NS and PSP_NS ARMv8-M Security Extensions special registers.
2016-05-09opcodes,gas: sparc: fix mnemonic of faligndataiJose E. Marchesi2-4/+7
opcodes/ChangeLog: 2016-05-09 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-opc.c (sparc_opcodes): Fix mnemonic of faligndatai. gas/ChangeLog: 2016-05-09 Jose E. Marchesi <jose.marchesi@oracle.com> * testsuite/gas/sparc/sparc5vis4.s: Fix mnemonic of faligndatai. * testsuite/gas/sparc/sparc5vis4.d: Likewise.
2016-05-09Regenerate configureAlan Modra1-7/+10
2016-05-04[ARC] Add SYNTAX_NOP and SYNTAX_1OP for extension instructionsClaudiu Zissulescu3-7/+66
gas/ 2016-05-03 Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (syntaxclass): Add SYNTAX_NOP and SYNTAX_1OP. (arc_extinsn): Handle new introduced syntax. * testsuite/gas/arc/textinsn1op.d: New file. * testsuite/gas/arc/textinsn1op.s: Likewise. * doc/c-arc.texi: Document SYNTAX_NOP and SYNTAX_1OP. opcodes/ 2016-05-03 Claudiu Zissulescu <claziss@synopsys.com> * arc-ext.c (dump_ARC_extmap): Handle SYNATX_NOP and SYNTAX_1OP. (arcExtMap_genOpcode): Likewise. * arc-opc.c (arg_32bit_rc): Define new variable. (arg_32bit_u6): Likewise. (arg_32bit_limm): Likewise. include/ 2016-05-03 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (ARC_SYNTAX_1OP): Declare (ARC_SYNTAX_NOP): Likewsie. (ARC_OP1_MUST_BE_IMM): Update defined value. (ARC_OP1_IMM_IMPLIED): Likewise. (arg_32bit_rc, arg_32bit_u6, arg_32bit_limm): Declare.
2016-05-03Fix generation of AArhc64 instruction table.Szabolcs Nagy5-6/+17
* aarch64-gen.c (VERIFIER): Define. * aarch64-opc.c (VERIFIER): Define. (verify_ldpsw): Use static linkage. * aarch64-opc.h (verify_ldpsw): Remove. * aarch64-tbl.h: Use VERIFIER for verifiers.
2016-04-28Add support to AArch64 disassembler for verifying instructions. Add ↵Nick Clifton5-1332/+1239
verifier for LDPSW. PR target/19722 opcodes * aarch64-dis.c (aarch64_opcode_decode): Run verifier if present. * aarch64-opc.c (verify_ldpsw): New function. * aarch64-opc.h (verify_ldpsw): New prototype. * aarch64-tbl.h: Add initialiser for verifier field. (LDPSW): Set verifier to verify_ldpsw. binutils* testsuite/binutils-all/aarch64/illegal.s: New test. * testsuite/binutils-all/aarch64/illegal.d: New test driver. include * opcode/aarch64.h (struct aarch64_opcode): Add verifier field.
2016-04-23Skip if size of bfd_vma is smaller than address sizeH.J. Lu2-0/+14
Disassembler won't work properly when size of bfd_vma is smaller than address size. PR binutils/19983 PR binutils/19984 * i386-dis.c (print_insn): Return -1 if size of bfd_vma is smaller than address size.
2016-04-20update many old style function definitionsTrevor Saunders21-141/+98
This includes regenerating a bunch of files in opcodes/ with trunk cgen. gprof/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * basic_blocks.c: Update old style function definitions. * cg_arcs.c: Likewise. * cg_print.c: Likewise. * gen-c-prog.awk: Likewise. * gmon_io.c: Likewise. * hertz.c: Likewise. * hist.c: Likewise. * sym_ids.c: Likewise. bfd/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * cache.c: Update old style function definitions. * elf32-m68k.c: Likewise. * elf64-mmix.c: Likewise. * stab-syms.c: Likewise. opcodes/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * alpha-dis.c: Regenerate. * crx-dis.c: Likewise. * disassemble.c: Likewise. * epiphany-opc.c: Likewise. * fr30-opc.c: Likewise. * frv-opc.c: Likewise. * ip2k-opc.c: Likewise. * iq2000-opc.c: Likewise. * lm32-opc.c: Likewise. * lm32-opinst.c: Likewise. * m32c-opc.c: Likewise. * m32r-opc.c: Likewise. * m32r-opinst.c: Likewise. * mep-opc.c: Likewise. * mt-opc.c: Likewise. * or1k-opc.c: Likewise. * or1k-opinst.c: Likewise. * tic80-opc.c: Likewise. * xc16x-opc.c: Likewise. * xstormy16-opc.c: Likewise. ld/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * emultempl/scoreelf.em: Likewise. binutils/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * resres.c: Likewise. gas/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * cgen.c: Likewise. * config/tc-bfin.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-metag.c: Likewise. * config/tc-nios2.c: Likewise. * config/tc-rl78.c: Likewise.
2016-04-19opcodes/arc: Add yet more nps instructionsAndrew Burgess3-23/+246
Add some more arc/nps400 instructions and the associated operands. There's also a test added into the assembler. gas/ChangeLog: * testsuite/gas/arc/nps400-6.d: New file. * testsuite/gas/arc/nps400-6.s: New file. include/ChangeLog: * opcode/arc.h (MAX_INSN_ARGS): Increase 6 to 8. opcodes/ChangeLog: * arc-nps400-tbl.h: Add addb, subb, adcb, sbcb, andb, xorb, orb, fxorb, wxorb, shlb, shrb, notb, cntbb, div, mod, divm, and qcmp instructions. * arc-opc.c (insert_nps_bitop_size): Delete. (extract_nps_bitop_size): Delete. (MAKE_SRC_POS_INSERT_EXTRACT_FUNCS): Define, and use. (extract_nps_qcmp_m3): Define. (extract_nps_qcmp_m2): Define. (extract_nps_qcmp_m1): Define. (arc_flag_operands): Add F_NPS_SX, F_NPS_AR, F_NPS_AL. (arc_flag_classes): Add C_NPS_SX, C_NPS_AR_AL (arc_operands): Add NPS_SRC2_POS, NPS_SRC1_POS, NPS_ADDB_SIZE, NPS_ANDB_SIZE, NPS_FXORB_SIZ, NPS_WXORB_SIZ, NPS_R_XLDST, NPS_DIV_UIMM4, NPS_QCMP_SIZE, NPS_QCMP_M1, NPS_QCMP_M2, and NPS_QCMP_M3.
2016-04-19opcodes/arc: Add more nps instructionsAndrew Burgess2-0/+23
Add dctcp, dcip, dcet, and dcacl instructions. gas/ChangeLog: * testsuite/gas/arc/nps400-4.d: New file. * testsuite/gas/arc/nps400-4.s: New file. * testsuite/gas/arc/nps400-5.d: New file. * testsuite/gas/arc/nps400-5.s: New file. include/ChangeLog: * opcode/arc.h (insn_class_t): Add NET and ACL class. opcodes/ChangeLog: * arc-nps400-tbl.h: Add dctcp, dcip, dcet, and dcacl instructions.
2016-04-15Regenerate Makefile.in/aclocal.m4 automake 1.11.6H.J. Lu3-45/+104
bfd/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. binutils/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. gas/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. gold/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * testsuite/Makefile.in: Likewise. gprof/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. ld/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. opcodes/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise.
2016-04-14arc/nps400 : New cmem instructions and associated relocationAndrew Burgess3-0/+42
Add support for arc/nps400 cmem instructions, these load and store instructions are hard-wired to access "0x57f00000 + 16-bit-offset". Supporting this relocation required some additions to the arc relocation handling in the bfd library, as well as the standard changes required to add a new relocation type. There's a test of the new instructions in the assembler, and a test of the relocation in the linker. bfd/ChangeLog: * reloc.c: Add BFD_RELOC_ARC_NPS_CMEM16 entry. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-arc.c: Add 'opcode/arc.h' include. (struct arc_relocation_data): Add symbol_name. (arc_special_overflow_checks): New function. (arc_do_relocation): Use arc_special_overflow_checks, reindent as required, add an extra comment. (elf_arc_relocate_section): Setup symbol_name in reloc_data. gas/ChangeLog: * testsuite/gas/arc/nps400-3.d: New file. * testsuite/gas/arc/nps400-3.s: New file. include/ChangeLog: * elf/arc-reloc.def: Add ARC_NPS_CMEM16 reloc. * opcode/arc.h (NPS_CMEM_HIGH_VALUE): Define. ld/ChangeLog: * testsuite/ld-arc/arc.exp: New file. * testsuite/ld-arc/nps-1.s: New file. * testsuite/ld-arc/nps-1a.d: New file. * testsuite/ld-arc/nps-1b.d: New file. * testsuite/ld-arc/nps-1b.err: New file. opcodes/ChangeLog: * arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst instructions. * arc-opc.c (insert_nps_cmem_uimm16): New function. (extract_nps_cmem_uimm16): New function. (arc_operands): Add NPS_XLDST_UIMM16 operand.
2016-04-14opcodes/arc: Move instruction length logic to new functionAndrew Burgess2-13/+50
Move the logic that calculates the instruction length out to a new function. Restructure the code to make it simpler. opcodes/ChangeLog: * arc-dis.c (arc_insn_length): New function. (print_insn_arc): Use arc_insn_length, change insnLen to unsigned. (find_format): Change insnLen parameter to unsigned.
2016-04-13Fix disassembly of the V850's LD.BU instruction.Nick Clifton2-2/+8
PR target/19937 opcode * v850-opc.c (v850_opcodes): Correct masks for long versions of the LD.B and LD.BU instructions. gas * testsuite/gas/v850/pr19937.s: New test. * testsuite/gas/v850/pr19937.d: New test control file. * testsuite/gas/v850/basic.exp: Run the new test.
2016-04-12Add support for .extCondCode, .extCoreRegister and .extAuxRegister.Claudiu Zissulescu5-437/+543
gas/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/textauxregister.d: New file. * testsuite/gas/arc/textauxregister.s: Likewise. * testsuite/gas/arc/textcondcode.d: Likewise. * testsuite/gas/arc/textcondcode.s: Likewise. * testsuite/gas/arc/textcoreregister.d: Likewise. * testsuite/gas/arc/textcoreregister.s: Likewise. * testsuite/gas/arc/textpseudoop.d: Likewise. * testsuite/gas/arc/textpseudoop.s: Likewise. * testsuite/gas/arc/ld2.d: Update test. * testsuite/gas/arc/st.d: Likewise. * testsuite/gas/arc/taux.d: Likewise. * doc/c-arc.texi (ARC Directives): Add .extCondCode, .extCoreRegister and .extAuxRegister documentation. * config/tc-arc.c (arc_extcorereg): New function. (md_pseudo_table): Add .extCondCode, .extCoreRegister and .extAuxRegister pseudo-ops. (extRegister_t): New type. (ext_condcode, arc_aux_hash): New global variable. (find_opcode_match): Check for extensions. (preprocess_operands): Likewise. (md_begin): Add aux registers in a hash. (assemble_insn): Update use arc_flags member. (tokenize_extregister): New function. (create_extcore_section): Likewise. * config/tc-arc.h (MAX_FLAG_NAME_LENGHT): Increase to 10. (arc_flags): Delete code, add flgp. include/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (flag_class_t): Update. (ARC_OPCODE_NONE): Define. (ARC_OPCODE_ARCALL): Likewise. (ARC_OPCODE_ARCFPX): Likewise. (ARC_REGISTER_READONLY): Likewise. (ARC_REGISTER_WRITEONLY): Likewise. (ARC_REGISTER_NOSHORT_CUT): Likewise. (arc_aux_reg): Add cpu. opcodes/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * arc-dis.c (find_format): Check for extension flags. (print_flags): New function. (print_insn_arc): Update for .extCondCode, .extCoreRegister and .extAuxRegister. * arc-ext.c (arcExtMap_coreRegName): Use LAST_EXTENSION_CORE_REGISTER. (arcExtMap_coreReadWrite): Likewise. (dump_ARC_extmap): Update printing. * arc-opc.c (arc_flag_classes): Add F_CLASS_EXTEND flag. (arc_aux_regs): Add cpu field. * arc-regs.h: Add cpu field, lower case name aux registers. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
2016-04-12Update ARC instruction data-base.Claudiu Zissulescu2-0/+10
gas/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/noargs_a7.d: New file. * testsuite/gas/arc/noargs_a7.s: Likewise. * testsuite/gas/arc/noargs_hs.d: Likewise. * testsuite/gas/arc/noargs_hs.s: Likewise. opcode/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * arc-tbl.h: Add rtsc, sleep with no arguments. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
2016-04-12Add support for .extInstruction pseudo-op.Claudiu Zissulescu5-142/+554
gas/ 2016-04-04 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/textinsn-errors.d: New File. * testsuite/gas/arc/textinsn-errors.err: Likewise. * testsuite/gas/arc/textinsn-errors.s: Likewise. * testsuite/gas/arc/textinsn2op.d: Likewise. * testsuite/gas/arc/textinsn2op.s: Likewise. * testsuite/gas/arc/textinsn2op01.d: Likewise. * testsuite/gas/arc/textinsn2op01.s: Likewise. * testsuite/gas/arc/textinsn3op.d: Likewise. * testsuite/gas/arc/textinsn3op.s: Likewise. * doc/c-arc.texi (ARC Directives): Add .extInstruction documentation. * config/tc-arc.c (arcext_section): New variable. (arc_extinsn): New function. (md_pseudo_table): Add .extInstruction pseudo op. (attributes_t): New type. (suffixclass, syntaxclass, syntaxclassmod): New constant structures. (find_opcode_match): Remove arc_num_opcodes. (md_begin): Likewise. (tokenize_extinsn): New function. (arc_set_ext_seg): Likewise. (create_extinst_section): Likewise. include/ 2016-04-04 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (arc_num_opcodes): Remove. (ARC_SYNTAX_3OP, ARC_SYNTAX_2OP, ARC_OP1_MUST_BE_IMM) (ARC_OP1_IMM_IMPLIED, ARC_SUFFIX_NONE, ARC_SUFFIX_COND) (ARC_SUFFIX_FLAG): Define. (flags_none, flags_f, flags_cc, flags_ccf): Declare. (arg_none, arg_32bit_rarbrc, arg_32bit_zarbrc, arg_32bit_rbrbrc) (arg_32bit_rarbu6, arg_32bit_zarbu6, arg_32bit_rbrbu6) (arg_32bit_rbrbs12, arg_32bit_ralimmrc, arg_32bit_rarblimm) (arg_32bit_zalimmrc, arg_32bit_zarblimm, arg_32bit_rbrblimm) (arg_32bit_ralimmu6, arg_32bit_zalimmu6, arg_32bit_zalimms12) (arg_32bit_ralimmlimm, arg_32bit_zalimmlimm, arg_32bit_rbrc) (arg_32bit_zarc, arg_32bit_rbu6, arg_32bit_zau6, arg_32bit_rblimm) (arg_32bit_zalimm, arg_32bit_limmrc, arg_32bit_limmu6) (arg_32bit_limms12, arg_32bit_limmlimm): Likewise. opcodes/ 2016-04-04 Claudiu Zissulescu <claziss@synopsys.com> * arc-opc.c (flags_none, flags_f, flags_cc, flags_ccf): Initialize. (arg_none, arg_32bit_rarbrc, arg_32bit_zarbrc, arg_32bit_rbrbrc) (arg_32bit_rarbu6, arg_32bit_zarbu6, arg_32bit_rbrbu6) (arg_32bit_rbrbs12, arg_32bit_ralimmrc, arg_32bit_rarblimm) (arg_32bit_zalimmrc, arg_32bit_zarblimm, arg_32bit_rbrblimm) (arg_32bit_ralimmu6, arg_32bit_zalimmu6, arg_32bit_zalimms12) (arg_32bit_ralimmlimm, arg_32bit_zalimmlimm, arg_32bit_rbrc) (arg_32bit_zarc, arg_32bit_rbu6, arg_32bit_zau6, arg_32bit_rblimm) (arg_32bit_zalimm, arg_32bit_limmrc, arg_32bit_limmu6) (arg_32bit_limms12, arg_32bit_limmlimm): Likewise. (arc_opcode arc_opcodes): Null terminate the array. (arc_num_opcodes): Remove. * arc-ext.h (INSERT_XOP): Define. (extInstruction_t): Likewise. (arcExtMap_instName): Delete. (arcExtMap_insn): New function. (arcExtMap_genOpcode): Likewise. * arc-ext.c (ExtInstruction): Remove. (create_map): Zero initialize instruction fields. (arcExtMap_instName): Remove. (arcExtMap_insn): New function. (dump_ARC_extmap): More info while debuging. (arcExtMap_genOpcode): New function. * arc-dis.c (find_format): New function. (print_insn_arc): Use find_format. (arc_get_disassembler): Enable dump_ARC_extmap only when debugging. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
2016-04-11MIPS/opcodes: Fix undecoded MIPS16 extended instruction bit disassemblyMaciej W. Rozycki2-2/+9
Correct the disassembly of hardware don't cares in MIPS16 extended instructions. Rather than e.g.: 0: f008 0231 addiu v0,sp,16433 4: f520 3260 sll v0,v1,-12 print: 0: f008 0231 addiu v0,sp,16401 4: f520 3260 sll v0,v1,20 respectively instead. opcodes/ * mips-dis.c (print_mips16_insn_arg): Mask unused extended instruction bits out. binutils/ * testsuite/binutils-all/mips/mips16-undecoded.d: New test. * testsuite/binutils-all/mips/mips16-undecoded.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new test.
generated by cgit v1.1 at 2024-11-27 00:45:58 +0000