aboutsummaryrefslogtreecommitdiff
path: root/opcodes/aarch64-opc.h
AgeCommit message (Collapse)AuthorFilesLines
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-12-02aarch64: Add maximum immediate value to aarch64_sys_regRichard Sandiford1-0/+4
The immediate form of MSR has a 4-bit immediate field (in CRm). However, many forms of MSR require a smaller immediate. These cases are identified by value in operand_general_constraint_met_p, but they're now the common case rather than the exception. This patch therefore adds the maximum value to the sys_reg description and gets the range from there. It also enforces the minimum of 0, which avoids a situation in which: msr dit, #2 would give the expected: Error: immediate value out of range 0 to 1 whereas: msr dit, #-1 would give: Error: immediate value out of range 0 to 15 (from the later UIMM4 checking). Also: - we were reporting the first error above against the wrong operand - TCO takes a single-bit immediate, but we previously allowed all 16 values. [https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions/MSR--immediate---Move-immediate-value-to-Special-Register-?lang=en] opcodes/ * aarch64-opc.h (F_REG_MAX_VALUE, F_GET_REG_MAX_VALUE): New macros. * aarch64-opc.c (operand_general_constraint_met_p): Read the maximum MSR immediate value from aarch64_pstatefields. (aarch64_pstatefields): Add the maximum immediate value for each register. gas/ * testsuite/gas/aarch64/sysreg-4.s: Use an immediate value of 1 rather than 8 for the TCO test. * testsuite/gas/aarch64/sysreg-4.d: Update accordingly. * testsuite/gas/aarch64/armv8_2-a-illegal.l: Fix operand number in MSR immediate error messages. * testsuite/gas/aarch64/diagnostic.l: Likewise. * testsuite/gas/aarch64/pan-illegal.l: Likewise. * testsuite/gas/aarch64/ssbs-illegal1.l: Likewise. * testsuite/gas/aarch64/illegal-sysreg-4b.s, * testsuite/gas/aarch64/illegal-sysreg-4b.d, * testsuite/gas/aarch64/illegal-sysreg-4b.l: New test.
2021-11-17aarch64: [SME] SVE2 instructions added to support SMEPrzemyslaw Wirkus1-0/+4
This patch is adding new SVE2 instructions added to support SME extension. The following SVE2 instructions are added by the SME architecture: * PSEL, * REVD, SCLAMP and UCLAMP. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_pred_reg_with_index): New parser. (parse_operands): New parser. * testsuite/gas/aarch64/sme-9-illegal.d: New test. * testsuite/gas/aarch64/sme-9-illegal.l: New test. * testsuite/gas/aarch64/sme-9-illegal.s: New test. * testsuite/gas/aarch64/sme-9.d: New test. * testsuite/gas/aarch64/sme-9.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_SME_PnT_Wm_imm. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index): New inserter. * aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index): New extractor. * aarch64-opc.c (aarch64_print_operand): Printout of OPND_SME_PnT_Wm_imm. * aarch64-opc.h (enum aarch64_field_kind): New bitfields FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl. * aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier. (OP_SVE_QMQ): New qualifier. (struct aarch64_opcode): New instructions PSEL, REVD, SCLAMP and UCLAMP. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.
2021-11-17aarch64: [SME] Add SME mode selection and state access instructionsPrzemyslaw Wirkus1-0/+26
This patch is adding new SME mode selection and state access instructions: * Add SMSTART and SMSTOP instructions. * Add SVCR system register. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_sm_za): New parser. (parse_operands): New parser. * testsuite/gas/aarch64/sme-8-illegal.d: New test. * testsuite/gas/aarch64/sme-8-illegal.l: New test. * testsuite/gas/aarch64/sme-8-illegal.s: New test. * testsuite/gas/aarch64/sme-8.d: New test. * testsuite/gas/aarch64/sme-8.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_SME_SM_ZA. (enum aarch64_insn_class): New instruction classes sme_start and sme_stop. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_pstatefield): New inserter. (aarch64_ins_sme_sm_za): New inserter. * aarch64-dis.c (aarch64_ext_imm): New extractor. (aarch64_ext_pstatefield): New extractor. (aarch64_ext_sme_sm_za): New extractor. * aarch64-opc.c (operand_general_constraint_met_p): New pstatefield value for SME instructions. (aarch64_print_operand): Printout for OPND_SME_SM_ZA. (SR_SME): New register SVCR. * aarch64-opc.h (F_REG_IN_CRM): New register endcoding. * aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding. (PSTATE_ENCODE_CRM): Encode CRm field. (PSTATE_DECODE_CRM): Decode CRm field. (PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field. (PSTATE_DECODE_CRM_IMM): Decode CRm immediate field. (PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate field. * aarch64-tbl.h (struct aarch64_opcode): New SMSTART and SMSTOP instructions. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.
2021-11-17aarch64: [SME] Add ZERO instructionPrzemyslaw Wirkus1-0/+1
This patch is adding ZERO (a list of 64-bit element ZA tiles) instruction. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_list_of_64bit_tiles): New parser. (parse_operands): Handle OPND_SME_list_of_64bit_tiles. * testsuite/gas/aarch64/sme-4-illegal.d: New test. * testsuite/gas/aarch64/sme-4-illegal.l: New test. * testsuite/gas/aarch64/sme-4-illegal.s: New test. * testsuite/gas/aarch64/sme-4.d: New test. * testsuite/gas/aarch64/sme-4.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_SME_list_of_64bit_tiles. opcodes/ChangeLog: * aarch64-opc.c (print_sme_za_list): New printing function. (aarch64_print_operand): Handle OPND_SME_list_of_64bit_tiles. * aarch64-opc.h (enum aarch64_field_kind): New bitfield FLD_SME_zero_mask. * aarch64-tbl.h (struct aarch64_opcode): New ZERO instruction. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.
2021-11-17aarch64: [SME] Add MOV and MOVA instructionsPrzemyslaw Wirkus1-1/+6
This patch is adding new MOV (alias) and MOVA SME instruction. gas/ChangeLog: * config/tc-aarch64.c (enum sme_hv_slice): new enum. (struct reloc_entry): Added ZAH and ZAV registers. (parse_sme_immediate): Immediate parser. (parse_sme_za_hv_tiles_operand): ZA tile parser. (parse_sme_za_hv_tiles_operand_index): Index parser. (parse_operands): Added ZA tile parser calls. (REGNUMS): New macro. Regs with suffix. (REGSET16S): New macro. 16 regs with suffix. * testsuite/gas/aarch64/sme-2-illegal.d: New test. * testsuite/gas/aarch64/sme-2-illegal.l: New test. * testsuite/gas/aarch64/sme-2-illegal.s: New test. * testsuite/gas/aarch64/sme-2.d: New test. * testsuite/gas/aarch64/sme-2.s: New test. * testsuite/gas/aarch64/sme-2a.d: New test. * testsuite/gas/aarch64/sme-2a.s: New test. * testsuite/gas/aarch64/sme-3-illegal.d: New test. * testsuite/gas/aarch64/sme-3-illegal.l: New test. * testsuite/gas/aarch64/sme-3-illegal.s: New test. * testsuite/gas/aarch64/sme-3.d: New test. * testsuite/gas/aarch64/sme-3.s: New test. * testsuite/gas/aarch64/sme-3a.d: New test. * testsuite/gas/aarch64/sme-3a.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New enums AARCH64_OPND_SME_ZA_HV_idx_src and AARCH64_OPND_SME_ZA_HV_idx_dest. (struct aarch64_opnd_info): New ZA tile vector struct. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter. * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter ins_sme_za_hv_tiles. * aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor. * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor ext_sme_za_hv_tiles. * aarch64-opc.c (aarch64_print_operand): Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest. * aarch64-opc.h (enum aarch64_field_kind): New enums FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv. (struct aarch64_operand): Increase fields size to 5. * aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.
2021-11-17aarch64: [SME] Add SME instructionsPrzemyslaw Wirkus1-0/+3
Patch is adding new SME matrix instructions. Please note additional instructions will be added in following patches. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_zada_operand): New parser. * config/tc-aarch64.c (parse_reg_with_qual): New reg parser. * config/tc-aarch64.c (R_ZA): New egister type. (parse_operands): New parser. * testsuite/gas/aarch64/sme-illegal.d: New test. * testsuite/gas/aarch64/sme-illegal.l: New test. * testsuite/gas/aarch64/sme-illegal.s: New test. * testsuite/gas/aarch64/sme.d: New test. * testsuite/gas/aarch64/sme.s: New test. * testsuite/gas/aarch64/sme-f64.d: New test. * testsuite/gas/aarch64/sme-f64.s: New test. * testsuite/gas/aarch64/sme-i64.d: New test. * testsuite/gas/aarch64/sme-i64.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operands AARCH64_OPND_SME_ZAda_2b, AARCH64_OPND_SME_ZAda_3b and AARCH64_OPND_SME_Pm. (enum aarch64_insn_class): New instruction class sme_misc. opcodes/ChangeLog: * aarch64-opc.c (aarch64_print_operand): Print OPND_SME_ZAda_2b and OPND_SME_ZAda_3b operands. (verify_constraints): Handle OPND_SME_Pm. * aarch64-opc.h (enum aarch64_field_kind): New bit fields FLD_SME_ZAda_2b, FLD_SME_ZAda_3b and FLD_SME_Pm. * aarch64-tbl.h (OP_SME_ZADA_PN_PM_ZN_S): New qualifier set. (OP_SME_ZADA_PN_PM_ZN_D): New qualifier. (OP_SME_ZADA_PN_PM_ZN_ZM): New qualifier. (OP_SME_ZADA_S_PM_PM_S_S): New qualifier. (OP_SME_ZADA_D_PM_PM_D_D): New qualifier. (OP_SME_ZADA_S_PM_PM_H_H): New qualifier. (OP_SME_ZADA_S_PM_PM_B_B): New qualifier. (OP_SME_ZADA_D_PM_PM_H_H): New qualifier. (SME_INSN): New instruction macro. (SME_F64_INSN): New instruction macro. (SME_I64_INSN): New instruction macro. (SME_INSNC): New instruction macro. (struct aarch64_opcode): New SME instructions. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.
2021-03-31Use bool in opcodesAlan Modra1-10/+10
cpu/ * frv.opc: Replace bfd_boolean with bool, FALSE with false, and TRUE with true throughout. opcodes/ * sysdep.h (POISON_BFD_BOOLEAN): Define. * aarch64-asm-2.c, * aarch64-asm.c, * aarch64-asm.h, * aarch64-dis-2.c, * aarch64-dis.c, * aarch64-dis.h, * aarch64-gen.c, * aarch64-opc.c, * aarch64-opc.h, * arc-dis.c, * arc-dis.h, * arc-fxi.h, * arc-opc.c, * arm-dis.c, * bfin-dis.c, * cris-dis.c, * csky-dis.c, * csky-opc.h, * dis-buf.c, * disassemble.c, * frv-opc.c, * frv-opc.h, * h8300-dis.c, * i386-dis.c, * m68k-dis.c, * metag-dis.c, * microblaze-dis.c, * microblaze-dis.h, * micromips-opc.c, * mips-dis.c, * mips-formats.h, * mips-opc.c, * mips16-opc.c, * mmix-dis.c, * msp430-dis.c, * nds32-dis.c, * nfp-dis.c, * nios2-dis.c, * ppc-dis.c, * riscv-dis.c, * score-dis.c, * score7-dis.c, * tic6x-dis.c, * v850-dis.c, * vax-dis.c, * wasm32-dis.c, * xtensa-dis.c: Replace bfd_boolean with bool, FALSE with false, and TRUE with true throughout.
2021-03-29TRUE/FALSE simplificationAlan Modra1-6/+6
There is really no need to write code like "foo != 0 ? TRUE : FALSE" unless we had stupidly defined FALSE as something other than 0 or TRUE as something other than 1. The simpler "foo != 0" does just as well. Similarly "(condition == TRUE)" or "(condition == FALSE) can be simplified to "(condition)" and "(!condition)" respectively. I'll note that there is reason to use "integer_expression != 0" when assigning a bfd_boolean rather than the simpler "integer_expression", if you expect the variable to have 0 or 1 value. It's probably even a good idea to not rely on implicit conversion if bfd_boolean were _Bool. bfd/ * aoutx.h (aout_link_write_symbols): Don't cast boolean expression to bfd_boolean. * elf32-or1k.c (or1k_set_got_and_rela_sizes): Dont compare booleans against FALSE. * elf32-arc.c (name_for_global_symbol): Don't compare boolean to TRUE. (is_reloc_PC_relative): Don't use "boolean_condition ? TRUE : FALSE". (is_reloc_SDA_relative, is_reloc_for_GOT): Likewise. (is_reloc_for_PLT, is_reloc_for_TLS): Likewise. * elf32-arm.c (stm32l4xx_need_create_replacing_stub): Likewise. * elf32-nds32.c (insert_nds32_elf_blank): Likewise. * elf32-rx.c (rx_set_section_contents): Likewise. * elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Likewise. * elfxx-mips.c (_bfd_mips_elf_ignore_undef_symbol): Likewise. * mach-o.c (bfd_mach_o_read_command): Likewise. * targets.c (bfd_get_target_info): Likewise. binutils/ * dlltool.c (main): Don't use "boolean_condition ? TRUE : FALSE". * dwarf.c (read_and_display_attr_value): Likewise. (display_debug_str_offsets): Likewise. * objdump.c (dump_bfd): Likewise. * readelf.c (dump_section_as_strings): Likewise. (dump_section_as_bytes): Likewise. gas/ * atof-generic.c (FALSE, TRUE): Don't define. * config/obj-elf.h (FALSE, TRUE): Don't define. * config/obj-som.h (FALSE, TRUE): Don't define. * config/tc-hppa.h (FALSE, TRUE): Don't define. * config/tc-pdp11.c (FALSE, TRUE): Don't define. * config/tc-iq2000.h (obj_fix_adjustable): Delete. * config/tc-m32r.h (TC_FIX_ADJUSTABLE): Delete. * config/tc-mt.h (obj_fix_adjustable): Delete. * config/tc-nds32.h (TC_FIX_ADJUSTABLE): Delete. * config/tc-arc.c (parse_opcode_flags): Simplify boolean expression. (relaxable_flag, relaxable_operand, assemble_insn): Likewise. (tokenize_extregister): Likewise. * config/tc-csky.c (parse_opcode, get_operand_value): Likewise. (parse_operands_op, parse_operands, md_assemble): Likewise. * config/tc-d10v.c (build_insn): Likewise. * config/tc-score.c (s3_gen_insn_frag): Likewise. * config/tc-score7.c (s7_gen_insn_frag, s7_relax_frag): Likewise. * config/tc-tic6x.c (tic6x_update_features, md_assemble): Likewise. * config/tc-z80.c (emit_byte): Likewise. include/ * opcode/aarch64.h (alias_opcode_p): Simplify boolean expression. (opcode_has_alias, pseudo_opcode_p, optional_operand_p): Likewise. (opcode_has_special_coder): Likewise. ld/ * emultempl/aix.em (gld${EMULATION_NAME}_before_allocation): Simplify boolean expression. * lexsup.c (parse_args): Likewise. * pe-dll.c (pe_dll_id_target): Likewise. opcodes/ * aarch64-opc.c (vector_qualifier_p): Simplify boolean expression. (fp_qualifier_p, get_data_pattern): Likewise. (aarch64_get_operand_modifier_from_value): Likewise. (aarch64_extend_operator_p, aarch64_shift_operator_p): Likewise. (operand_variant_qualifier_p): Likewise. (qualifier_value_in_range_constraint_p): Likewise. (aarch64_get_qualifier_esize): Likewise. (aarch64_get_qualifier_nelem): Likewise. (aarch64_get_qualifier_standard_value): Likewise. (get_lower_bound, get_upper_bound): Likewise. (aarch64_find_best_match, match_operands_qualifier): Likewise. (aarch64_print_operand): Likewise. * aarch64-opc.h (operand_has_inserter, operand_has_extractor): Likewise. (operand_need_sign_extension, operand_need_shift_by_two): Likewise. (operand_need_shift_by_four, operand_maybe_stack_pointer): Likewise. * arm-dis.c (print_insn_mve, print_insn_thumb32): Likewise. * tic6x-dis.c (tic6x_check_fetch_packet_header): Likewise. (print_insn_tic6x): Likewise.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-10-28aarch64: Add DSB instruction Armv8.7-a variantPrzemyslaw Wirkus1-1/+2
This patch adds new variant (nXS) of DSB memory barrier instruction available in Armv8.7-a. New nXS variant has different encoding in comparison with pre Armv8.7-a DSB memory barrier variant thus new instruction and new operand was added. DSB memory nXS barrier variant specifies the limitation on the barrier operation. Allowed values are: DSB SYnXS|#28 DSB ISHnXS|#24 DSB NSHnXS|#20 DSB OSHnXS|#16 Please note that till now, for barriers, barrier operation was encoded in 4-bit unsigned immediate CRm field (in the range 0 to 15). For DSB memory nXS barrier variant, barrier operation is a 5-bit unsigned assembly instruction immediate, encoded in instruction in two bits CRm<3:2>: CRm<3:2> #imm 00 16 01 20 10 24 11 28 This patch extends current AArch64 barrier instructions with above mapping. Notable patch changes include: + New DSB memory barrier variant encoding for Armv8.7-a. + New operand BARRIER_DSB_NXS for above instruction in order to distinguish between existing and new DSB instruction flavour. + New set of DSB nXS barrier options. + New instruction inserter and extractor map between instruction immediate 5-bit value and 2-bit CRm field of the instruction itself (see FLD_CRm_dsb_nxs). + Regeneration of aarch64-[asm|dis|opc]-2.c files. + Test cases to cover new instruction assembling and disassembling. For more details regarding DSB memory barrier instruction and its Armv8.7-a flavour please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document pages 132-133 of [0]. [0]: https://developer.arm.com/docs/ddi0596/i gas/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * NEWS: Docs update. * config/tc-aarch64.c (parse_operands): Add AARCH64_OPND_BARRIER_DSB_NXS handler. (md_begin): Add content of aarch64_barrier_dsb_nxs_options to aarch64_barrier_opt_hsh hash. * testsuite/gas/aarch64/system-4-invalid.d: New test. * testsuite/gas/aarch64/system-4-invalid.l: New test. * testsuite/gas/aarch64/system-4-invalid.s: New test. * testsuite/gas/aarch64/system-4.d: New test. * testsuite/gas/aarch64/system-4.s: New test. include/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_BARRIER_DSB_NXS. (aarch64_barrier_dsb_nxs_options): Declare DSB nXS options. opcodes/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter. * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter ins_barrier_dsb_nx. * aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor. * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor ext_barrier_dsb_nx. * aarch64-opc.c (aarch64_print_operand): New options table aarch64_barrier_dsb_nxs_options. * aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs. * aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier Armv8.7-a instruction. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-04-30AArch64: add GAS support for UDF instructionAlex Coplan1-0/+1
binutils * testsuite/binutils-all/aarch64/in-order-all.d: Update to use new disassembly. * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise. ld/ * testsuite/ld-aarch64/erratum843419_tls_ie.d: Use udf in disassembly. * testsuite/ld-aarch64/farcall-b-section.d: Likewise. * testsuite/ld-aarch64/farcall-back.d: Likewise. * testsuite/ld-aarch64/farcall-bl-section.d: Likewise. gas/ * config/tc-aarch64.c (fix_insn): Implement for AARCH64_OPND_UNDEFINED. (parse_operands): Implement for AARCH64_OPND_UNDEFINED. * testsuite/gas/aarch64/udf.s: New. * testsuite/gas/aarch64/udf.d: New. * testsuite/gas/aarch64/udf-invalid.s: New. * testsuite/gas/aarch64/udf-invalid.l: New. * testsuite/gas/aarch64/udf-invalid.d: New. include * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_UNDEFINED. opcodes * aarch64-opc.h (enum aarch64_field_kind): Add FLD_imm16_2. * aarch64-opc.c (fields): Add entry for FLD_imm16_2. (operand_general_constraint_met_p): validate AARCH64_OPND_UNDEFINED. * aarch64-tbl.h (aarch64_opcode_table): Add udf instruction, entry for FLD_imm16_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-12-17ubsan: aarch64: left shift cannot be represented in type 'int64_t'Alan Modra1-1/+1
* aarch64-opc.c (value_fit_signed_field_p): Avoid signed overflow. (value_fit_unsigned_field_p): Likewise. (aarch64_wide_constant_p): Likewise. (operand_general_constraint_met_p): Likewise. * aarch64-opc.h (aarch64_wide_constant_p): Update prototype.
2019-05-09[binutils][aarch64] New SVE_Zm4_11_INDEX operand.Matthew Malcomson1-0/+1
This includes defining a new single bit field SVE_i2h at position 20. SVE_Zm4_11_INDEX handles indexed Zn registers where the index is encoded in bits 20:11 and the register is chosed from range z0-z15 in bits 19-16. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm4_11_INDEX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm4_11_INDEX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_Zm4_11_INDEX. (aarch64_print_operand): Add printing for SVE_Zm4_11_INDEX. (fields): Handle SVE_i2h field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_i2h field. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm4_11_INDEX operand.
2019-05-09[binutils][aarch64] New sve_size_sd2 iclass.Matthew Malcomson1-0/+1
Define new sve_size_sd2 iclass to distinguish between the two variants of ldnt1sb and ldnt1sh. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_sd2 iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_sd2 iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_sd2 iclass decode. * aarch64-opc.c (fields): Handle SVE_sz2 field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_sz2 field.
2019-05-09[binutils][aarch64] New SVE_Zm3_11_INDEX operand.Matthew Malcomson1-0/+2
Introduce new operand SVE_Zm3_11_INDEX that indicates a register between z0-z7 stored in bits 18-16 and an index stored in bits 20-19:11. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm3_11_INDEX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm3_11_INDEX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_Zm3_11_INDEX. (aarch64_print_operand): Add printing for SVE_Zm3_11_INDEX. (fields): Handle SVE_i3l and SVE_i3h2 fields. * aarch64-opc.h (enum aarch64_field_kind): New SVE_i3l and SVE_i3h2 fields. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm3_11_INDEX operand.
2019-05-09[binutils][aarch64] New iclass sve_size_hsd2.Matthew Malcomson1-0/+1
Add "sve_size_hsd2" iclass decode that uses the new FLD_SVE_size field value to determine the variant of an instruction. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_hsd2 iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_hsd2 iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_hsd2 iclass decode. * aarch64-opc.c (fields): Handle SVE_size field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_size field.
2019-05-09[binutils][aarch64] Introduce SVE_IMM_ROT3 operand.Matthew Malcomson1-0/+1
New operand AARCH64_OPND_SVE_IMM_ROT3 handles a single bit rotate operand encoded at bit position 10. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_IMM_ROT3 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_IMM_ROT3 operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_IMM_ROT3. (aarch64_print_operand): Add printing for SVE_IMM_ROT3. (fields): Handle SVE_rot3 field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_rot3 field. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_IMM_ROT3 operand.
2019-02-07AArch64: Add verifier for By elem Single and Double sized instructions.Tamar Christina1-1/+2
The AArch64 instruction set has cut-outs inside instructions encodings for when a given encoding that would normally fall within the encoding space of an instruction is instead undefined. This updates the first few instructions FMLA, FMLA, FMUL and FMULX in the case where sz:L == 11. gas/ChangeLog: PR binutils/23212 * testsuite/gas/aarch64/undefined_by_elem_sz_l.s: New test. * testsuite/gas/aarch64/undefined_by_elem_sz_l.d: New test. opcodes/ChangeLog: PR binutils/23212 * aarch64-opc.h (enum aarch64_field_kind): Add FLD_sz. * aarch64-opc.c (verify_elem_sd): New. (fields): Add FLD_sz entr. * aarch64-tbl.h (_SIMD_INSN): New. (aarch64_opcode_table): Add elem_sd verifier to fmla, fmls, fmul and fmulx scalar and vector by element isns.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-11-12[BINUTILS, AARCH64, 2/8] Add Tag generation instructions in Memory Tagging ↵Sudakshina Das1-0/+11
Extension This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Tag generation instructions from MTE. These are the following instructions added in this patch: - IRG <Xd|SP>, <Xn|SP>{, Xm} - ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2> - SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2> - GMI <Xd>, <Xn|SP>, <Xm> where <Xd|SP> : Is the 64-bit destination GPR or Stack pointer. <Xn|SP> : Is the 64-bit source GPR or Stack pointer. <uimm6> : Is the unsigned immediate, a multiple of 16 in the range 0 to 1008. <uimm4> : Is the unsigned immediate, in the range 0 to 15. *** include/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3. (OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New. * aarch64-opc.c (fields): Add entry for imm4_3. (operand_general_constraint_met_p): Add cases for AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_ADDG): New. (aarch64_opcode_table): Add addg, subg, irg and gmi. (AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10. * aarch64-asm.c (aarch64_ins_imm): Add case for operand_need_shift_by_four. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add switch case for AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10. * testsuite/gas/aarch64/armv8_5-a-memtag.s: New. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.d: Likewise.
2018-10-09[PATCH, BINUTILS, AARCH64, 7/9] Add BTI instructionSudakshina Das1-0/+8
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/bti-branch-target-identification) The Branch Target Identification instructions (BTI) are allocated to existing HINT space, using HINT numbers 32, 34, 36, 38, such that bits[7:6] of the instruction identify the compatibility of the BTI instruction to different branches. BTI {<targets>} where <targets> one of the following, specifying which type of indirection is allowed: j : Can be a target of any BR Xn isntruction. c : Can be a target of any BLR Xn and BR {X16|X17}. jc: Can be a target of any free branch. A BTI instruction without any <targets> is the strictest of all and can not be a target of nay free branch. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_BTI): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_BTI by default. (aarch64_opnd): Add AARCH64_OPND_BTI_TARGET. (HINT_OPD_CSYNC, HINT_OPD_C, HINT_OPD_J): New macros to define HINT #imm values. (HINT_OPD_JC, HINT_OPD_NULL): Likewise. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New. (HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag with the hint immediate. * aarch64-opc.c (aarch64_hint_options): New entries for c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI. (aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET while checking for HINT_OPD_F_NOPRINT flag. * aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to extract value. * aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New. (aarch64_opcode_table): Add entry for BTI. (AARCH64_OPERANDS): Add new description for BTI targets. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_bti_operand): New. (process_omitted_operand): Add case for AARCH64_OPND_BTI_TARGET. (parse_operands): Likewise. * testsuite/gas/aarch64/system.d: Update for BTI. * testsuite/gas/aarch64/bti.s: New. * testsuite/gas/aarch64/bti.d: New. * testsuite/gas/aarch64/illegal-bti.d: New. * testsuite/gas/aarch64/illegal-bti.l: New.
2018-10-03AArch64: Add SVE constraints verifier.Tamar Christina1-0/+4
This patch adds the verification rules for move prefix constraints. The Arm SVE instruction MOVPRFX introduces[1] constraints on the instruction at PC+4. Particularly the following constraints are handled by this patch * MOVPRFX must be followed by an instruction. * MOVPRFX can only be followed by non-layout altering directives. * MOVPRFX destination register MUST be used as the destination register in the instruction at PC+4, and is not allowed to be used in any other position other than destructive input. This includes registers that architecturally overlap. e.g. x1 should be treated as z1. * MOVPRFX must be followed by a restricted set of SVE instructions. * The size of the destination register of MOVPRFX must be equal to that of the operation at PC+4. * The predicate register and operation of MOVPRFX must match that of the instruction at PC+4 * The predicated instruction at PC+4 must use the merging predicate. * Architectural aliases and pseudo-instructions need to be supported as well. * MOVPRFX cannot be the last instruction in a sequence Any failure to adhere to any of these constrains will emit an assembly warning and a disassembly note. [1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a include/ * opcode/aarch64.h (aarch64_inst): Remove. (enum err_type): Add ERR_VFI. (aarch64_is_destructive_by_operands): New. (init_insn_sequence): New. (aarch64_decode_insn): Remove param name. opcodes/ * aarch64-opc.c (init_insn_block): New. (verify_constraints, aarch64_is_destructive_by_operands): New. * aarch64-opc.h (verify_constraints): New. gas/ * config/tc-aarch64.c (output_operand_error_report): Order warnings.
2018-05-15Implement Read/Write constraints on system registers on AArch64Tamar Christina1-0/+20
This patch adds constraints for read and write only system registers with the msr and mrs instructions. The code will treat having both flags set and none set as the same. These flags add constraints that must be matched up. e.g. a system register with a READ only flag set, can only be used with mrs. If The constraint fails a warning is emitted. Examples of the warnings generated: test.s: Assembler messages: test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3' test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0' test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3' and disassembly notes: 0000000000000000 <main>: 0: d5130503 msr dbgdtrtx_el0, x3 4: d5130503 msr dbgdtrtx_el0, x3 8: d5330503 mrs x3, dbgdtrrx_el0 c: d5330503 mrs x3, dbgdtrrx_el0 10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register. Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during disassembly the constraints are use to disambiguate between the two. An exact constraint match is always prefered over partial ones if available. As always the warnings can be suppressed with -w and also be made errors using warnings as errors. binutils/ PR binutils/21446 * doc/binutils.texi (-M): Document AArch64 options. gas/ PR binutils/21446 * testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test. * testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise. * testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise. * testsuite/gas/aarch64/sysreg-diagnostic.s: New. * testsuite/gas/aarch64/sysreg-diagnostic.l: New. * testsuite/gas/aarch64/sysreg-diagnostic.d: New. include/ PR binutils/21446 * opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New. opcodes/ PR binutils/21446 * aarch64-asm.c (opintl.h): Include. (aarch64_ins_sysreg): Enforce read/write constraints. * aarch64-dis.c (aarch64_ext_sysreg): Likewise. * aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here. (F_REG_READ, F_REG_WRITE): New. * aarch64-opc.c (aarch64_print_operand): Generate notes for AARCH64_OPND_SYSREG. (F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h. (aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0, mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1, id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1, id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1, id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1, mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1, id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1, id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1, id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1, csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2, rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0, mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1, mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1, pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0. * aarch64-tbl.h (aarch64_opcode_table): Add constraints to msr (F_SYS_WRITE), mrs (F_SYS_READ).
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-11-09Adds the new Fields and Operand types for the new instructions in Armv8.4-a.Tamar Christina1-0/+3
gas/ * config/tc-aarch64.c (process_omitted_operand): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2 and AARCH64_OPND_IMM_2. (parse_operands): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2, AARCH64_OPND_IMM_2, AARCH64_OPND_MASK and AARCH64_OPND_ADDR_OFFSET. include/ * opcode/aarch64.h: (aarch64_opnd): Add AARCH64_OPND_Va, AARCH64_OPND_MASK, AARCH64_OPND_IMM_2, AARCH64_OPND_ADDR_OFFSET and AARCH64_OPND_SM3_IMM2. (aarch64_insn_class): Add cryptosm3 and cryptosm4. (arch64_feature_set): Make uint64_t. opcodes/ * aarch64-asm.h (ins_addr_offset): New. * aarch64-asm.c (aarch64_ins_reglane): Add cryptosm3. (aarch64_ins_addr_offset): New. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_addr_offset): New. * aarch64-dis.c (aarch64_ext_reglane): Add cryptosm3. (aarch64_ext_addr_offset): New. * aarch64-dis-2.c: Regenerate. * aarch64-opc.h (aarch64_field_kind): Add FLD_imm6_2, FLD_imm4_2 and FLD_SM3_imm2. * aarch64-opc.c (fields): Add FLD_imm6_2, FLD_imm4_2 and FLD_SM3_imm2. (operand_general_constraint_met_p): Add AARCH64_OPND_ADDR_OFFSET. (aarch64_print_operand): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2, AARCH64_OPND_MASK, AARCH64_OPND_IMM_2 and AARCH64_OPND_ADDR_OFFSET. * aarch64-opc-2.c (Va, MASK, IMM_2, ADDR_OFFSET, SM3_IMM2): New. * aarch64-tbl.h (aarch64_opcode_table): Add Va, MASK, IMM_2, ADDR_OFFSET, SM3_IMM2.
2017-02-24[AArch64] Additional SVE instructionsRichard Sandiford1-2/+13
This patch supports some additions to the SVE architecture prior to its public release. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4x16) (AARCH64_OPND_SVE_IMM_ROT1, AARCH64_OPND_SVE_IMM_ROT2) (AARCH64_OPND_SVE_Zm3_INDEX, AARCH64_OPND_SVE_Zm3_22_INDEX) (AARCH64_OPND_SVE_Zm4_INDEX): New aarch64_opnds. opcodes/ * aarch64-tbl.h (OP_SVE_HMH, OP_SVE_VMU_HSD, OP_SVE_VMVU_HSD) (OP_SVE_VMVV_HSD, OP_SVE_VMVVU_HSD, OP_SVE_VM_HSD, OP_SVE_VUVV_HSD) (OP_SVE_VUV_HSD, OP_SVE_VU_HSD, OP_SVE_VVVU_H, OP_SVE_VVVU_S) (OP_SVE_VVVU_HSD, OP_SVE_VVV_D, OP_SVE_VVV_D_H, OP_SVE_VVV_H) (OP_SVE_VVV_HSD, OP_SVE_VVV_S, OP_SVE_VVV_S_B, OP_SVE_VVV_SD_BH) (OP_SVE_VV_BHSDQ, OP_SVE_VV_HSD, OP_SVE_VZVV_HSD, OP_SVE_VZV_HSD) (OP_SVE_V_HSD): New macros. (OP_SVE_VMU_SD, OP_SVE_VMVU_SD, OP_SVE_VM_SD, OP_SVE_VUVV_SD) (OP_SVE_VU_SD, OP_SVE_VVVU_SD, OP_SVE_VVV_SD, OP_SVE_VZVV_SD) (OP_SVE_VZV_SD, OP_SVE_V_SD): Delete. (aarch64_opcode_table): Add new SVE instructions. (aarch64_opcode_table): Use imm_rotate{1,2} instead of imm_rotate for rotation operands. Add new SVE operands. * aarch64-asm.h (ins_sve_addr_ri_s4): New inserter. (ins_sve_quad_index): Likewise. (ins_imm_rotate): Split into... (ins_imm_rotate1, ins_imm_rotate2): ...these two inserters. * aarch64-asm.c (aarch64_ins_imm_rotate): Split into... (aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2): ...these two functions. (aarch64_ins_sve_addr_ri_s4): New function. (aarch64_ins_sve_quad_index): Likewise. (do_misc_encoding): Handle "MOV Zn.Q, Qm". * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_addr_ri_s4): New extractor. (ext_sve_quad_index): Likewise. (ext_imm_rotate): Split into... (ext_imm_rotate1, ext_imm_rotate2): ...these two extractors. * aarch64-dis.c (aarch64_ext_imm_rotate): Split into... (aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2): ...these two functions. (aarch64_ext_sve_addr_ri_s4): New function. (aarch64_ext_sve_quad_index): Likewise. (aarch64_ext_sve_index): Allow quad indices. (do_misc_decoding): Likewise. * aarch64-dis-2.c: Regenerate. * aarch64-opc.h (FLD_SVE_i3h, FLD_SVE_rot1, FLD_SVE_rot2): New aarch64_field_kinds. (OPD_F_OD_MASK): Widen by one bit. (OPD_F_NO_ZR): Bump accordingly. (get_operand_field_width): New function. * aarch64-opc.c (fields): Add new SVE fields. (operand_general_constraint_met_p): Handle new SVE operands. (aarch64_print_operand): Likewise. * aarch64-opc-2.c: Regenerate. gas/ * doc/c-aarch64.texi: Document that sve implies fp16, simd and compnum. * config/tc-aarch64.c (parse_vector_type_for_operand): Allow .q to be used with SVE registers. (parse_operands): Handle new SVE operands. (aarch64_features): Make "sve" require F16 rather than FP. Also require COMPNUM. * testsuite/gas/aarch64/sve.s: Add tests for new instructions. Include compnum tests. * testsuite/gas/aarch64/sve.d: Update accordingly. * testsuite/gas/aarch64/sve-invalid.s: Add tests for new instructions. * testsuite/gas/aarch64/sve-invalid.l: Update accordingly. Also update expected output for new FMOV and MOV alternatives.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-11-18[AArch64] Add ARMv8.3 FCMLA and FCADD instructionsSzabolcs Nagy1-0/+3
Add support for FCMLA and FCADD complex arithmetic SIMD instructions. FCMLA has an indexed element variant where the index range has to be treated specially because a complex number takes two elements and the indexed vector size depends on the other operands. These complex number SIMD instructions are part of ARMv8.3 https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_IMM_ROT1, AARCH64_OPND_IMM_ROT2, AARCH64_OPND_IMM_ROT3. (enum aarch64_op): Add OP_FCMLA_ELEM. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define. (aarch64_feature_simd_v8_3, SIMD_V8_3): Define. (aarch64_opcode_table): Add fcmla and fcadd. (AARCH64_OPERANDS): Add IMM_ROT{1,2,3}. * aarch64-asm.h (aarch64_ins_imm_rotate): Declare. * aarch64-asm.c (aarch64_ins_imm_rotate): Define. * aarch64-dis.h (aarch64_ext_imm_rotate): Declare. * aarch64-dis.c (aarch64_ext_imm_rotate): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}. * aarch64-opc.c (fields): Add FLD_rotate{1,2,3}. (operand_general_constraint_met_p): Rotate and index range check. (aarch64_print_operand): Handle rotate operand. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT*. * testsuite/gas/aarch64/advsimd-armv8_3.d: New. * testsuite/gas/aarch64/advsimd-armv8_3.s: New. * testsuite/gas/aarch64/illegal-fcmla.s: New. * testsuite/gas/aarch64/illegal-fcmla.l: New. * testsuite/gas/aarch64/illegal-fcmla.d: New.
2016-11-18[AArch64] Add ARMv8.3 combined pointer authentication load instructionsSzabolcs Nagy1-0/+1
Add support for ARMv8.3 LDRAA and LDRAB combined pointer authentication and load instructions. These instructions authenticate the base register and load 8 byte from it plus a scaled 10-bit offset with optional writeback to update the base register. A new instruction class (ldst_imm10) and operand type (AARCH64_OPND_ADDR_SIMM10) were introduced to handle the special addressing form. include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM10. (enum aarch64_insn_class): Add ldst_imm10. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_X1NIL): New. (arch64_opcode_table): Add ldraa, ldrab. (AARCH64_OPERANDS): Add "ADDR_SIMM10". * aarch64-asm.h (aarch64_ins_addr_simm10): Declare. * aarch64-asm.c (aarch64_ins_addr_simm10): Define. * aarch64-dis.h (aarch64_ext_addr_simm10): Declare. * aarch64-dis.c (aarch64_ext_addr_simm10): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_S_simm10. * aarch64-opc.c (fields): Add data for FLD_S_simm10. (operand_general_constraint_met_p): Handle AARCH64_OPND_ADDR_SIMM10. (aarch64_print_operand): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_ADDR_SIMM10. (fix_insn): Likewise. (warn_unpredictable_ldst): Handle ldst_imm10. * testsuite/gas/aarch64/pac.s: Add ldraa and ldrab tests. * testsuite/gas/aarch64/pac.d: Likewise. * testsuite/gas/aarch64/illegal-ldraa.s: New. * testsuite/gas/aarch64/illegal-ldraa.l: New. * testsuite/gas/aarch64/illegal-ldraa.d: New.
2016-09-21[AArch64][SVE 31/32] Add SVE instructionsRichard Sandiford1-0/+3
This patch adds the SVE instruction definitions and associated OP_* enum values. include/ * opcode/aarch64.h (AARCH64_FEATURE_SVE): New macro. (OP_MOV_P_P, OP_MOV_Z_P_Z, OP_MOV_Z_V, OP_MOV_Z_Z, OP_MOV_Z_Zi) (OP_MOVM_P_P_P, OP_MOVS_P_P, OP_MOVZS_P_P_P, OP_MOVZ_P_P_P) (OP_NOTS_P_P_P_Z, OP_NOT_P_P_P_Z): New aarch64_ops. opcodes/ * aarch64-tbl.h (OP_SVE_B, OP_SVE_BB, OP_SVE_BBBU, OP_SVE_BMB) (OP_SVE_BPB, OP_SVE_BUB, OP_SVE_BUBB, OP_SVE_BUU, OP_SVE_BZ) (OP_SVE_BZB, OP_SVE_BZBB, OP_SVE_BZU, OP_SVE_DD, OP_SVE_DDD) (OP_SVE_DMD, OP_SVE_DMH, OP_SVE_DMS, OP_SVE_DU, OP_SVE_DUD, OP_SVE_DUU) (OP_SVE_DUV_BHS, OP_SVE_DUV_BHSD, OP_SVE_DZD, OP_SVE_DZU, OP_SVE_HB) (OP_SVE_HMD, OP_SVE_HMS, OP_SVE_HU, OP_SVE_HUU, OP_SVE_HZU, OP_SVE_RR) (OP_SVE_RURV_BHSD, OP_SVE_RUV_BHSD, OP_SVE_SMD, OP_SVE_SMH, OP_SVE_SMS) (OP_SVE_SU, OP_SVE_SUS, OP_SVE_SUU, OP_SVE_SZS, OP_SVE_SZU, OP_SVE_UB) (OP_SVE_UUD, OP_SVE_UUS, OP_SVE_VMR_BHSD, OP_SVE_VMU_SD) (OP_SVE_VMVD_BHS, OP_SVE_VMVU_BHSD, OP_SVE_VMVU_SD, OP_SVE_VMVV_BHSD) (OP_SVE_VMVV_SD, OP_SVE_VMV_BHSD, OP_SVE_VMV_HSD, OP_SVE_VMV_SD) (OP_SVE_VM_SD, OP_SVE_VPU_BHSD, OP_SVE_VPV_BHSD, OP_SVE_VRR_BHSD) (OP_SVE_VRU_BHSD, OP_SVE_VR_BHSD, OP_SVE_VUR_BHSD, OP_SVE_VUU_BHSD) (OP_SVE_VUVV_BHSD, OP_SVE_VUVV_SD, OP_SVE_VUV_BHSD, OP_SVE_VUV_SD) (OP_SVE_VU_BHSD, OP_SVE_VU_HSD, OP_SVE_VU_SD, OP_SVE_VVD_BHS) (OP_SVE_VVU_BHSD, OP_SVE_VVVU_SD, OP_SVE_VVV_BHSD, OP_SVE_VVV_SD) (OP_SVE_VV_BHSD, OP_SVE_VV_HSD_BHS, OP_SVE_VV_SD, OP_SVE_VWW_BHSD) (OP_SVE_VXX_BHSD, OP_SVE_VZVD_BHS, OP_SVE_VZVU_BHSD, OP_SVE_VZVV_BHSD) (OP_SVE_VZVV_SD, OP_SVE_VZV_SD, OP_SVE_V_SD, OP_SVE_WU, OP_SVE_WV_BHSD) (OP_SVE_XU, OP_SVE_XUV_BHSD, OP_SVE_XVW_BHSD, OP_SVE_XV_BHSD) (OP_SVE_XWU, OP_SVE_XXU): New macros. (aarch64_feature_sve): New variable. (SVE): New macro. (_SVE_INSN): Likewise. (aarch64_opcode_table): Add SVE instructions. * aarch64-opc.h (extract_fields): Declare. * aarch64-opc-2.c: Regenerate. * aarch64-asm.c (do_misc_encoding): Handle the new SVE aarch64_ops. * aarch64-asm-2.c: Regenerate. * aarch64-dis.c (extract_fields): Make global. (do_misc_decoding): Handle the new SVE aarch64_ops. * aarch64-dis-2.c: Regenerate. gas/ * doc/c-aarch64.texi: Document the "sve" feature. * config/tc-aarch64.c (REG_TYPE_R_Z_BHSDQ_VZP): New register type. (get_reg_expected_msg): Handle it. (parse_operands): When parsing operands of an SVE instruction, disallow immediates that match REG_TYPE_R_Z_BHSDQ_VZP. (aarch64_features): Add an entry for SVE.
2016-09-21[AArch64][SVE 30/32] Add SVE instruction classesRichard Sandiford1-0/+7
The main purpose of the SVE aarch64_insn_classes is to describe how an index into an aarch64_opnd_qualifier_seq_t is represented in the instruction encoding. Other instructions usually use flags for this information, but (a) we're running out of those and (b) the iclass would otherwise be unused for SVE. include/ * opcode/aarch64.h (sve_cpy, sve_index, sve_limm, sve_misc) (sve_movprfx, sve_pred_zm, sve_shift_pred, sve_shift_unpred) (sve_size_bhs, sve_size_bhsd, sve_size_hsd, sve_size_sd): New aarch64_insn_classes. opcodes/ * aarch64-opc.h (FLD_SVE_M_4, FLD_SVE_M_14, FLD_SVE_M_16) (FLD_SVE_sz, FLD_SVE_tsz, FLD_SVE_tszl_8, FLD_SVE_tszl_19): New aarch64_field_kinds. * aarch64-opc.c (fields): Add corresponding entries. * aarch64-asm.c (aarch64_get_variant): New function. (aarch64_encode_variant_using_iclass): Likewise. (aarch64_opcode_encode): Call it. * aarch64-dis.c (aarch64_decode_variant_using_iclass): New function. (aarch64_opcode_decode): Call it.
2016-09-21[AArch64][SVE 29/32] Add new SVE core & FP register operandsRichard Sandiford1-0/+5
SVE uses some new fields to store W, X and scalar FP registers. This patch adds corresponding operands. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_Rm): New aarch64_opnd. (AARCH64_OPND_SVE_Rn_SP, AARCH64_OPND_SVE_VZn, AARCH64_OPND_SVE_Vd) (AARCH64_OPND_SVE_Vm, AARCH64_OPND_SVE_Vn): Likewise. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE core and FP register operands. * aarch64-opc.h (FLD_SVE_Rm, FLD_SVE_Rn, FLD_SVE_Vd, FLD_SVE_Vm) (FLD_SVE_Vn): New aarch64_field_kinds. * aarch64-opc.c (fields): Add corresponding entries. (aarch64_print_operand): Handle the new SVE core and FP register operands. * aarch64-opc-2.c: Regenerate. * aarch64-asm-2.c: Likewise. * aarch64-dis-2.c: Likewise. gas/ * config/tc-aarch64.c (parse_operands): Handle the new SVE core and FP register operands.
2016-09-21[AArch64][SVE 28/32] Add SVE FP immediate operandsRichard Sandiford1-0/+1
This patch adds support for the new SVE floating-point immediate operands. One operand uses the same 8-bit encoding as base AArch64, but in a different position. The others use a single bit to select between two values. One of the single-bit operands is a choice between 0 and 1, where 0 is not a valid 8-bit encoding. I think the cleanest way of handling these single-bit immediates is therefore to use the IEEE float encoding itself as the immediate value and select between the two possible values when encoding and decoding. As described in the covering note for the patch that added F_STRICT, we get better error messages by accepting unsuffixed vector registers and leaving the qualifier matching code to report an error. This means that we carry on parsing the other operands, and so can try to parse FP immediates for invalid instructions like: fcpy z0, #2.5 In this case there is no suffix to tell us whether the immediate should be treated as single or double precision. Again, we get better error messages by picking one (arbitrary) immediate size and reporting an error for the missing suffix later. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_FPIMM8): New aarch64_opnd. (AARCH64_OPND_SVE_I1_HALF_ONE, AARCH64_OPND_SVE_I1_HALF_TWO) (AARCH64_OPND_SVE_I1_ZERO_ONE): Likewise. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE FP immediate operands. * aarch64-opc.h (FLD_SVE_i1): New aarch64_field_kind. * aarch64-opc.c (fields): Add corresponding entry. (operand_general_constraint_met_p): Handle the new SVE FP immediate operands. (aarch64_print_operand): Likewise. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_float_half_one, ins_sve_float_half_two) (ins_sve_float_zero_one): New inserters. * aarch64-asm.c (aarch64_ins_sve_float_half_one): New function. (aarch64_ins_sve_float_half_two): Likewise. (aarch64_ins_sve_float_zero_one): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_float_half_one, ext_sve_float_half_two) (ext_sve_float_zero_one): New extractors. * aarch64-dis.c (aarch64_ext_sve_float_half_one): New function. (aarch64_ext_sve_float_half_two): Likewise. (aarch64_ext_sve_float_zero_one): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (double_precision_operand_p): New function. (parse_operands): Use it to calculate the dp_p input to parse_aarch64_imm_float. Handle the new SVE FP immediate operands.
2016-09-21[AArch64][SVE 27/32] Add SVE integer immediate operandsRichard Sandiford1-0/+9
This patch adds the new SVE integer immediate operands. There are three kinds: - simple signed and unsigned ranges, but with new widths and positions. - 13-bit logical immediates. These have the same form as in base AArch64, but at a different bit position. In the case of the "MOV Zn.<T>, #<limm>" alias of DUPM, the logical immediate <limm> is not allowed to be a valid DUP immediate, since DUP is preferred over DUPM for constants that both instructions can handle. - a new 9-bit arithmetic immediate, of the form "<imm8>{, LSL #8}". In some contexts the operand is signed and in others it's unsigned. As an extension, we allow shifted immediates to be written as a single integer, e.g. "#256" is equivalent to "#1, LSL #8". We also use the shiftless form as the preferred disassembly, except for the special case of "#0, LSL #8" (a redundant encoding of 0). include/ * opcode/aarch64.h (AARCH64_OPND_SIMM5): New aarch64_opnd. (AARCH64_OPND_SVE_AIMM, AARCH64_OPND_SVE_ASIMM) (AARCH64_OPND_SVE_INV_LIMM, AARCH64_OPND_SVE_LIMM) (AARCH64_OPND_SVE_LIMM_MOV, AARCH64_OPND_SVE_SHLIMM_PRED) (AARCH64_OPND_SVE_SHLIMM_UNPRED, AARCH64_OPND_SVE_SHRIMM_PRED) (AARCH64_OPND_SVE_SHRIMM_UNPRED, AARCH64_OPND_SVE_SIMM5) (AARCH64_OPND_SVE_SIMM5B, AARCH64_OPND_SVE_SIMM6) (AARCH64_OPND_SVE_SIMM8, AARCH64_OPND_SVE_UIMM3) (AARCH64_OPND_SVE_UIMM7, AARCH64_OPND_SVE_UIMM8) (AARCH64_OPND_SVE_UIMM8_53): Likewise. (aarch64_sve_dupm_mov_immediate_p): Declare. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE integer immediate operands. * aarch64-opc.h (FLD_SVE_immN, FLD_SVE_imm3, FLD_SVE_imm5) (FLD_SVE_imm5b, FLD_SVE_imm7, FLD_SVE_imm8, FLD_SVE_imm9) (FLD_SVE_immr, FLD_SVE_imms, FLD_SVE_tszh): New aarch64_field_kinds. * aarch64-opc.c (fields): Add corresponding entries. (operand_general_constraint_met_p): Handle the new SVE integer immediate operands. (aarch64_print_operand): Likewise. (aarch64_sve_dupm_mov_immediate_p): New function. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_inv_limm, ins_sve_aimm, ins_sve_asimm) (ins_sve_limm_mov, ins_sve_shlimm, ins_sve_shrimm): New inserters. * aarch64-asm.c (aarch64_ins_limm_1): New function, split out from... (aarch64_ins_limm): ...here. (aarch64_ins_inv_limm): New function. (aarch64_ins_sve_aimm): Likewise. (aarch64_ins_sve_asimm): Likewise. (aarch64_ins_sve_limm_mov): Likewise. (aarch64_ins_sve_shlimm): Likewise. (aarch64_ins_sve_shrimm): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_inv_limm, ext_sve_aimm, ext_sve_asimm) (ext_sve_limm_mov, ext_sve_shlimm, ext_sve_shrimm): New extractors. * aarch64-dis.c (decode_limm): New function, split out from... (aarch64_ext_limm): ...here. (aarch64_ext_inv_limm): New function. (decode_sve_aimm): Likewise. (aarch64_ext_sve_aimm): Likewise. (aarch64_ext_sve_asimm): Likewise. (aarch64_ext_sve_limm_mov): Likewise. (aarch64_top_bit): Likewise. (aarch64_ext_sve_shlimm): Likewise. (aarch64_ext_sve_shrimm): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (parse_operands): Handle the new SVE integer immediate operands.
2016-09-21[AArch64][SVE 25/32] Add support for SVE addressing modesRichard Sandiford1-0/+14
This patch adds most of the new SVE addressing modes and associated operands. A follow-on patch adds MUL VL, since handling it separately makes the changes easier to read. The patch also introduces a new "operand-dependent data" field to the operand flags, based closely on the existing one for opcode flags. For SVE this new field needs only 2 bits, but it could be widened in future if necessary. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_U6): New aarch64_opnd. (AARCH64_OPND_SVE_ADDR_RI_U6x2, AARCH64_OPND_SVE_ADDR_RI_U6x4) (AARCH64_OPND_SVE_ADDR_RI_U6x8, AARCH64_OPND_SVE_ADDR_RR) (AARCH64_OPND_SVE_ADDR_RR_LSL1, AARCH64_OPND_SVE_ADDR_RR_LSL2) (AARCH64_OPND_SVE_ADDR_RR_LSL3, AARCH64_OPND_SVE_ADDR_RX) (AARCH64_OPND_SVE_ADDR_RX_LSL1, AARCH64_OPND_SVE_ADDR_RX_LSL2) (AARCH64_OPND_SVE_ADDR_RX_LSL3, AARCH64_OPND_SVE_ADDR_RZ) (AARCH64_OPND_SVE_ADDR_RZ_LSL1, AARCH64_OPND_SVE_ADDR_RZ_LSL2) (AARCH64_OPND_SVE_ADDR_RZ_LSL3, AARCH64_OPND_SVE_ADDR_RZ_XTW_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW_22, AARCH64_OPND_SVE_ADDR_RZ_XTW1_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW1_22, AARCH64_OPND_SVE_ADDR_RZ_XTW2_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW2_22, AARCH64_OPND_SVE_ADDR_RZ_XTW3_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW3_22, AARCH64_OPND_SVE_ADDR_ZI_U5) (AARCH64_OPND_SVE_ADDR_ZI_U5x2, AARCH64_OPND_SVE_ADDR_ZI_U5x4) (AARCH64_OPND_SVE_ADDR_ZI_U5x8, AARCH64_OPND_SVE_ADDR_ZZ_LSL) (AARCH64_OPND_SVE_ADDR_ZZ_SXTW, AARCH64_OPND_SVE_ADDR_ZZ_UXTW): Likewise. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE address operands. * aarch64-opc.h (FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14) (FLD_SVE_xs_22): New aarch64_field_kinds. (OPD_F_OD_MASK, OPD_F_OD_LSB, OPD_F_NO_ZR): New flags. (get_operand_specific_data): New function. * aarch64-opc.c (fields): Add entries for FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14 and FLD_SVE_xs_22. (operand_general_constraint_met_p): Handle the new SVE address operands. (sve_reg): New array. (get_addr_sve_reg_name): New function. (aarch64_print_operand): Handle the new SVE address operands. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_addr_ri_u6, ins_sve_addr_rr_lsl) (ins_sve_addr_rz_xtw, ins_sve_addr_zi_u5, ins_sve_addr_zz_lsl) (ins_sve_addr_zz_sxtw, ins_sve_addr_zz_uxtw): New inserters. * aarch64-asm.c (aarch64_ins_sve_addr_ri_u6): New function. (aarch64_ins_sve_addr_rr_lsl): Likewise. (aarch64_ins_sve_addr_rz_xtw): Likewise. (aarch64_ins_sve_addr_zi_u5): Likewise. (aarch64_ins_sve_addr_zz): Likewise. (aarch64_ins_sve_addr_zz_lsl): Likewise. (aarch64_ins_sve_addr_zz_sxtw): Likewise. (aarch64_ins_sve_addr_zz_uxtw): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_addr_ri_u6, ext_sve_addr_rr_lsl) (ext_sve_addr_rz_xtw, ext_sve_addr_zi_u5, ext_sve_addr_zz_lsl) (ext_sve_addr_zz_sxtw, ext_sve_addr_zz_uxtw): New extractors. * aarch64-dis.c (aarch64_ext_sve_add_reg_imm): New function. (aarch64_ext_sve_addr_ri_u6): Likewise. (aarch64_ext_sve_addr_rr_lsl): Likewise. (aarch64_ext_sve_addr_rz_xtw): Likewise. (aarch64_ext_sve_addr_zi_u5): Likewise. (aarch64_ext_sve_addr_zz): Likewise. (aarch64_ext_sve_addr_zz_lsl): Likewise. (aarch64_ext_sve_addr_zz_sxtw): Likewise. (aarch64_ext_sve_addr_zz_uxtw): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (REG_TYPE_SVE_BASE, REG_TYPE_SVE_OFFSET): New register types. (get_reg_expected_msg): Handle them. (aarch64_addr_reg_parse): New function, split out from aarch64_reg_parse_32_64. Handle Z registers too. (aarch64_reg_parse_32_64): Call it. (parse_address_main): Add base_qualifier, offset_qualifier, base_type and offset_type parameters. Handle SVE base and offset registers. (parse_address): Update call to parse_address_main. (parse_sve_address): New function. (parse_operands): Parse the new SVE address operands.
2016-09-21[AArch64][SVE 24/32] Add AARCH64_OPND_SVE_PATTERN_SCALEDRichard Sandiford1-0/+1
Some SVE instructions count the number of elements in a given vector pattern and allow a scale factor of [1, 16] to be applied to the result. This scale factor is written ", MUL #n", where "MUL" is a new operator. E.g.: UQINCD X0, POW2, MUL #2 This patch adds support for this kind of operand. All existing operators were shifts of some kind, so there was a natural range of [0, 63] regardless of context. This was then narrowered further by later checks (e.g. to [0, 31] when used for 32-bit values). In contrast, MUL doesn't really have a natural context-independent range. Rather than pick one arbitrarily, it seemed better to make the "shift" amount a full 64-bit value and leave the range test to the usual operand-checking code. I've rearranged the fields of aarch64_opnd_info so that this doesn't increase the size of the structure (although I don't think its size is critical anyway). include/ * opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN_SCALED): New aarch64_opnd. (AARCH64_MOD_MUL): New aarch64_modifier_kind. (aarch64_opnd_info): Make shifter.amount an int64_t and rearrange the fields. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add an entry for AARCH64_OPND_SVE_PATTERN_SCALED. * aarch64-opc.h (FLD_SVE_imm4): New aarch64_field_kind. * aarch64-opc.c (fields): Add a corresponding entry. (set_multiplier_out_of_range_error): New function. (aarch64_operand_modifiers): Add entry for AARCH64_MOD_MUL. (operand_general_constraint_met_p): Handle AARCH64_OPND_SVE_PATTERN_SCALED. (print_register_offset_address): Use PRIi64 to print the shift amount. (aarch64_print_operand): Likewise. Handle AARCH64_OPND_SVE_PATTERN_SCALED. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_scale): New inserter. * aarch64-asm.c (aarch64_ins_sve_scale): New function. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_scale): New inserter. * aarch64-dis.c (aarch64_ext_sve_scale): New function. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (SHIFTED_MUL): New parse_shift_mode. (parse_shift): Handle it. Reject AARCH64_MOD_MUL for all other shift modes. Skip range tests for AARCH64_MOD_MUL. (process_omitted_operand): Handle AARCH64_OPND_SVE_PATTERN_SCALED. (parse_operands): Likewise.
2016-09-21[AArch64][SVE 23/32] Add SVE pattern and prfop operandsRichard Sandiford1-0/+2
The SVE instructions have two enumerated operands: one to select a vector pattern and another to select a prefetch operation. The latter is a cut-down version of the base AArch64 prefetch operation. Both types of operand can also be specified as raw enum values such as #31. Reserved values can only be specified this way. If it hadn't been for the pattern operand, I would have been tempted to use the existing parsing for prefetch operations and add extra checks for SVE. However, since the patterns needed new enum parsing code anyway, it seeemed cleaner to reuse it for the prefetches too. Because of the small number of enum values, I don't think we'd gain anything by using hash tables. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN): New aarch64_opnd. (AARCH64_OPND_SVE_PRFOP): Likewise. (aarch64_sve_pattern_array): Declare. (aarch64_sve_prfop_array): Likewise. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP. * aarch64-opc.h (FLD_SVE_pattern): New aarch64_field_kind. (FLD_SVE_prfop): Likewise. * aarch64-opc.c: Include libiberty.h. (aarch64_sve_pattern_array): New variable. (aarch64_sve_prfop_array): Likewise. (fields): Add entries for FLD_SVE_pattern and FLD_SVE_prfop. (aarch64_print_operand): Handle AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. gas/ * config/tc-aarch64.c (parse_enum_string): New function. (po_enum_or_fail): New macro. (parse_operands): Handle AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP.
2016-09-21[AArch64][SVE 21/32] Add Zn and Pn registersRichard Sandiford1-0/+16
This patch adds the Zn and Pn registers, and associated fields and operands. include/ * opcode/aarch64.h (AARCH64_OPND_CLASS_SVE_REG): New aarch64_operand_class. (AARCH64_OPND_CLASS_PRED_REG): Likewise. (AARCH64_OPND_SVE_Pd, AARCH64_OPND_SVE_Pg3, AARCH64_OPND_SVE_Pg4_5) (AARCH64_OPND_SVE_Pg4_10, AARCH64_OPND_SVE_Pg4_16) (AARCH64_OPND_SVE_Pm, AARCH64_OPND_SVE_Pn, AARCH64_OPND_SVE_Pt) (AARCH64_OPND_SVE_Za_5, AARCH64_OPND_SVE_Za_16, AARCH64_OPND_SVE_Zd) (AARCH64_OPND_SVE_Zm_5, AARCH64_OPND_SVE_Zm_16, AARCH64_OPND_SVE_Zn) (AARCH64_OPND_SVE_Zn_INDEX, AARCH64_OPND_SVE_ZnxN) (AARCH64_OPND_SVE_Zt, AARCH64_OPND_SVE_ZtxN): New aarch64_opnds. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new SVE operands. * aarch64-opc.h (FLD_SVE_Pd, FLD_SVE_Pg3, FLD_SVE_Pg4_5) (FLD_SVE_Pg4_10, FLD_SVE_Pg4_16, FLD_SVE_Pm, FLD_SVE_Pn, FLD_SVE_Pt) (FLD_SVE_Za_5, FLD_SVE_Za_16, FLD_SVE_Zd, FLD_SVE_Zm_5, FLD_SVE_Zm_16) (FLD_SVE_Zn, FLD_SVE_Zt, FLD_SVE_tzsh): New aarch64_field_kinds. * aarch64-opc.c (fields): Add corresponding entries here. (operand_general_constraint_met_p): Check that SVE register lists have the correct length. Check the ranges of SVE index registers. Check for cases where p8-p15 are used in 3-bit predicate fields. (aarch64_print_operand): Handle the new SVE operands. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_index, ins_sve_reglist): New inserters. * aarch64-asm.c (aarch64_ins_sve_index): New function. (aarch64_ins_sve_reglist): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_index, ext_sve_reglist): New extractors. * aarch64-dis.c (aarch64_ext_sve_index): New function. (aarch64_ext_sve_reglist): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (NTA_HASVARWIDTH): New macro. (AARCH64_REG_TYPES): Add ZN and PN. (get_reg_expected_msg): Handle them. (parse_vector_type_for_operand): Add a reg_type parameter. Skip the width for Zn and Pn registers. (parse_typed_reg): Extend vector handling to Zn and Pn. Update the call to parse_vector_type_for_operand. Set HASVARTYPE for Zn and Pn, expecting the width to be 0. (parse_vector_reg_list): Restrict error about [BHSD]nn operands to REG_TYPE_VN. (vectype_to_qualifier): Use S_[BHSD] qualifiers for NTA_HASVARWIDTH. (parse_operands): Handle the new Zn and Pn operands. (REGSET16): New macro, split out from... (REGSET31): ...here. (reg_names): Add Zn and Pn entries.
2016-05-03Fix generation of AArhc64 instruction table.Szabolcs Nagy1-3/+0
* aarch64-gen.c (VERIFIER): Define. * aarch64-opc.c (VERIFIER): Define. (verify_ldpsw): Use static linkage. * aarch64-opc.h (verify_ldpsw): Remove. * aarch64-tbl.h: Use VERIFIER for verifiers.
2016-04-28Add support to AArch64 disassembler for verifying instructions. Add ↵Nick Clifton1-0/+3
verifier for LDPSW. PR target/19722 opcodes * aarch64-dis.c (aarch64_opcode_decode): Run verifier if present. * aarch64-opc.c (verify_ldpsw): New function. * aarch64-opc.h (verify_ldpsw): New prototype. * aarch64-tbl.h: Add initialiser for verifier field. (LDPSW): Set verifier to verify_ldpsw. binutils* testsuite/binutils-all/aarch64/illegal.s: New test. * testsuite/binutils-all/aarch64/illegal.d: New test driver. include * opcode/aarch64.h (struct aarch64_opcode): Add verifier field.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-09-03[PATCH/AArch64] Implement LSE featureJiong Wang1-0/+1
2014-09-03 Jiong Wang <jiong.wang@arm.com> gas/ * config/tc-aarch64.c (parse_operands): Recognize PAIRREG. (aarch64_features): Add entry for lse extension. include/opcode/ * aarch64.h (AARCH64_FEATURE_LSE): New feature added. (aarch64_opnd): Add AARCH64_OPND_PAIRREG. (aarch64_insn_class): Add lse_atomic. (F_LSE_SZ): New field added. (opcode_has_special_coder): Recognize F_LSE_SZ. opcode/ * aarch64-tbl.h (QL_R4NIL): New qualifiers. (aarch64_feature_lse): New feature added. (LSE): New Added. (aarch64_opcode_table): New LSE instructions added. Improve descriptions for ldarb/ldarh/ldar. (aarch64_opcode_table): Describe PAIRREG. * aarch64-opc.h (aarch64_field_kind): Add FLD_lse_sz. * aarch64-opc.c (fields): Add entry for F_LSE_SZ. (aarch64_print_operand): Recognize PAIRREG. (operand_general_constraint_met_p): Check reg pair constraints for CASP instructions. * aarch64-dis.c (aarch64_ext_regno_pair): New extractor for paired reg. (do_special_decoding): Recognize F_LSE_SZ. * aarch64-asm.c (do_special_encoding): Recognize F_LSE_SZ. gas/testsuite/ * gas/aarch64/lse-atomic.d: New. * gas/aarch64/lse-atomic.s: Likewise. * gas/aarch64/illegal-lse.d: Likewise. * gas/aarch64/illegal-lse.l: Likewise. * gas/aarch64/illegal-lse.s: Likewise. * gas/aarch64/diagnostic.s: Check processor feature detect for lse instruction. * gas/aarch64/diagnostic.l: Likewise.
2014-03-05Update copyright yearsAlan Modra1-1/+1
2012-11-09Remove trailing redundant `;'H.J. Lu1-1/+1
bfd/ * aout-tic30.c (MY_final_link_callback): Remove trailing redundant `;'. * coff-h8500.c (extra_case): Likewise. (bfd_coff_reloc16_get_value): Likewise. * dwarf2.c (_bfd_dwarf2_cleanup_debug_info): Likewise. * elf.c (_bfd_elf_slurp_version_tables): Likewise. * elf32-frv.c (elf32_frv_relocate_section): Likewise. * elf32-v850.c (v850_elf_perform_relocation): Likewise. * opncls.c (bfd_calc_gnu_debuglink_crc32): Likewise. * plugin.c (add_symbols): Likewise. * reloc.c (bfd_check_overflow): Likewise. * vms-lib.c (_bfd_vms_lib_archive_p): Likewise. binutils/ * coffgrok.c (coff_grok): Remove trailing redundant `;'. * resrc.c (open_input_stream): Likewise. gas/ * config/atof-ieee.c (gen_to_words): Remove trailing redundant `;'. * config/atof-vax.c (flonum_gen2vax): Likewise. * config/tc-d10v.c (write_2_short): Likewise. * config/tc-i386-intel.c (i386_intel_simplify): Likewise. * config/tc-s390.c (tc_s390_force_relocation): Likewise. * config/tc-v850.c (md_parse_option): Likewise. * config/tc-xtensa.c (find_address_of_next_align_frag): Likewise. * dwarf2dbg.c (out_header): Likewise. * symbols.c (dollar_label_name): Likewise. (fb_label_name): Likewise. ld/ * testplug.c (record_add_file): Remove trailing redundant `;'. opcodes/ * aarch64-opc.h (gen_mask): Remove trailing redundant `;'. * ia64-gen.c (fetch_insn_class): Likewise.
2012-08-13Add support for 64-bit ARM architecture: AArch64Nick Clifton1-0/+392
generated by cgit v1.1 at 2024-11-26 10:31:37 +0000