aboutsummaryrefslogtreecommitdiff
path: root/opcodes/aarch64-opc-2.c
AgeCommit message (Collapse)AuthorFilesLines
2021-01-11aarch64: Remove support for CSREKyrylo Tkachov1-8/+8
This patch removes support for the CSRE extension from aarch64 gas/objdump. CSRE (FEAT_CSRE) is part of the Future Architecture Technologies program and at this time Arm is withdrawing this particular feature. The patch removes the system registers and the CSR PDEC instruction. gas/ChangeLog * NEWS: Remove CSRE. * config/tc-aarch64.c (parse_csr_operand): Delete. (parse_operands): Delete handling of AARCH64_OPND_CSRE_CSR. (aarch64_features): Remove csre. * doc/c-aarch64.texi: Remove CSRE. * testsuite/gas/aarch64/csre.d: Delete. * testsuite/gas/aarch64/csre-invalid.s: Likewise. * testsuite/gas/aarch64/csre-invalid.d: Likewise. * testsuite/gas/aarch64/csre_csr.s: Likewise. * testsuite/gas/aarch64/csre_csr.d: Likewise. * testsuite/gas/aarch64/csre_csr-invalid.s: Likewise. * testsuite/gas/aarch64/csre_csr-invalid.l: Likewise. * testsuite/gas/aarch64/csre_csr-invalid.d: Likewise. include/ChangeLog * opcode/aarch64.h (AARCH64_FEATURE_CSRE): Delete. (aarch64_opnd): Delete AARCH64_OPND_CSRE_CSR. opcodes/ChangeLog * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. * aarch64-opc.c (aarch64_print_operand): Delete handling of AARCH64_OPND_CSRE_CSR. * aarch64-tbl.h (aarch64_feature_csre): Delete. (CSRE): Likewise. (_CSRE_INSN): Likewise. (aarch64_opcode_table): Delete csr.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-11-09aarch64: Limit Rt register number for LS64 load/store instructionsPrzemyslaw Wirkus1-0/+1
Atomic 64-byte load/store instructions limit Rt register number to values matching below condition (register <Xt> number must be even and <= 22): if Rt<4:3> == '11' || Rt<0> == '1' then UNDEFINED; This patch adds check if Rt fulfills above requirement. For more details regarding atomic 64-byte load/store instruction for Armv8.7 please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document page 157 for load instruction, and pages 414-418 for store instructions of [0]. [0]: https://developer.arm.com/docs/ddi0596/i
2020-11-03[PATCH][GAS] aarch64: Add atomic 64-byte load/store instructions for Armv8.7Przemyslaw Wirkus1-16/+16
Armv8.7 architecture introduces the "accelerator extension", aka load/store of 64 bytes. New atomic load/store instructions are: LD64B, ST64B, ST64BV and ST64BV0. This patch adds: + New feature +ls64 to -march command line. + New atomic load/store instructions associated with above feature. For more details regarding atomic 64-byte load/store instruction for Armv8.7 please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document page 157 for load instruction, and pages 414-418 for store instructions of [0]. [0]: https://developer.arm.com/docs/ddi0596/i
2020-10-30[PATCH][GAS] aarch64: Add WFIT instruction for Armv8.7-aPrzemyslaw Wirkus1-8/+8
This patch adds new to Armv8.7 WFIT instruction which take one operand: WFIT <Xt> Where: <Xt> is 64-bit name of the general-purpose source register, encoded in the "Rd" field. For more details regarding WFIT (Wait For Interrupt with Timeout) instruction for Armv8.7-a please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document pages 570 of [0]. [0]: https://developer.arm.com/docs/ddi0596/i gas/ChangeLog: 2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * NEWS: Update docs. * testsuite/gas/aarch64/system-5.d: Update test with WFIT insn. * testsuite/gas/aarch64/system-5.s: Update test with WFIT insn. opcodes/ChangeLog: 2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * aarch64-tbl.h (struct aarch64_opcode): New instruction WFIT. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-10-28aarch64: Add CSR PDEC instructionPrzemyslaw Wirkus1-8/+8
This patch adds: + New feature +csre to -march command line. + New instruction CSR PDEC associated with CSRE feature. Please note that CSRE system registers were already upstreamed. This patch should finalize CSRE feature implementation. CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size of a Call stack record) instruction. Although this instruction has operand (PDEC) it's instruction's only operand. PDEC forces instruction field Rt to be set to 0b1111. This results in fixed opcode of the instruction. gas/ChangeLog: 2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * NEWS: Update docs. * config/tc-aarch64.c (parse_csr_operand): New operand parser. (parse_operands): Call to CSR operand parser. * testsuite/gas/aarch64/csre_csr-invalid.d: New test. * testsuite/gas/aarch64/csre_csr-invalid.l: New test. * testsuite/gas/aarch64/csre_csr-invalid.s: New test. * testsuite/gas/aarch64/csre_csr.d: New test. * testsuite/gas/aarch64/csre_csr.s: New test. include/ChangeLog: 2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_CSRE): New -march feature. (enum aarch64_opnd): New CSR instruction field AARCH64_OPND_CSRE_CSR. opcodes/ChangeLog: 2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * aarch64-opc.c (aarch64_print_operand): CSR PDEC operand print-out. * aarch64-tbl.h (CSRE): New CSRE feature handler. (_CSRE_INSN): New CSRE instruction type. (struct aarch64_opcode): New 'csre' entry for a CSRE CLI feature. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-10-28aarch64: Add WFET instruction for Armv8.7-aPrzemyslaw Wirkus1-8/+8
This patch adds new to Armv8.7 WFET instruction which take one operand: WFET <Xt> Where: <Xt> is 64-bit name of the general-purpose source register, encoded in the "Rd" field. For more details regarding WFET (Wait For Event with Timeout) instruction for Armv8.7-a please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document pages 565 of [0]. [0]: https://developer.arm.com/docs/ddi0596/i gas/ChangeLog: 2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * NEWS: Update docs. * testsuite/gas/aarch64/system-5.d: New test. * testsuite/gas/aarch64/system-5.s: New test. opcodes/ChangeLog: 2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * aarch64-tbl.h (struct aarch64_opcode): Add new WFET instruction encoding and operand description. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-10-28aarch64: Add DSB instruction Armv8.7-a variantPrzemyslaw Wirkus1-8/+9
This patch adds new variant (nXS) of DSB memory barrier instruction available in Armv8.7-a. New nXS variant has different encoding in comparison with pre Armv8.7-a DSB memory barrier variant thus new instruction and new operand was added. DSB memory nXS barrier variant specifies the limitation on the barrier operation. Allowed values are: DSB SYnXS|#28 DSB ISHnXS|#24 DSB NSHnXS|#20 DSB OSHnXS|#16 Please note that till now, for barriers, barrier operation was encoded in 4-bit unsigned immediate CRm field (in the range 0 to 15). For DSB memory nXS barrier variant, barrier operation is a 5-bit unsigned assembly instruction immediate, encoded in instruction in two bits CRm<3:2>: CRm<3:2> #imm 00 16 01 20 10 24 11 28 This patch extends current AArch64 barrier instructions with above mapping. Notable patch changes include: + New DSB memory barrier variant encoding for Armv8.7-a. + New operand BARRIER_DSB_NXS for above instruction in order to distinguish between existing and new DSB instruction flavour. + New set of DSB nXS barrier options. + New instruction inserter and extractor map between instruction immediate 5-bit value and 2-bit CRm field of the instruction itself (see FLD_CRm_dsb_nxs). + Regeneration of aarch64-[asm|dis|opc]-2.c files. + Test cases to cover new instruction assembling and disassembling. For more details regarding DSB memory barrier instruction and its Armv8.7-a flavour please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document pages 132-133 of [0]. [0]: https://developer.arm.com/docs/ddi0596/i gas/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * NEWS: Docs update. * config/tc-aarch64.c (parse_operands): Add AARCH64_OPND_BARRIER_DSB_NXS handler. (md_begin): Add content of aarch64_barrier_dsb_nxs_options to aarch64_barrier_opt_hsh hash. * testsuite/gas/aarch64/system-4-invalid.d: New test. * testsuite/gas/aarch64/system-4-invalid.l: New test. * testsuite/gas/aarch64/system-4-invalid.s: New test. * testsuite/gas/aarch64/system-4.d: New test. * testsuite/gas/aarch64/system-4.s: New test. include/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_BARRIER_DSB_NXS. (aarch64_barrier_dsb_nxs_options): Declare DSB nXS options. opcodes/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter. * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter ins_barrier_dsb_nx. * aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor. * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor ext_barrier_dsb_nx. * aarch64-opc.c (aarch64_print_operand): New options table aarch64_barrier_dsb_nxs_options. * aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs. * aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier Armv8.7-a instruction. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-09-08aarch64: Add support for Armv8-R DFB aliasAlex Coplan1-8/+8
This adds support for the DFB alias introduced in Armv8-R AArch64. gas/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * testsuite/gas/aarch64/dfb.d: New test. * testsuite/gas/aarch64/dfb.s: Input. opcodes/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * aarch64-tbl.h (aarch64_feature_v8_r): New. (ARMV8_R): New. (V8_R_INSN): New. (aarch64_opcode_table): Add dfb. * aarch64-opc-2.c: Regenerate. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate.
2020-04-30AArch64: add GAS support for UDF instructionAlex Coplan1-26/+27
binutils * testsuite/binutils-all/aarch64/in-order-all.d: Update to use new disassembly. * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise. ld/ * testsuite/ld-aarch64/erratum843419_tls_ie.d: Use udf in disassembly. * testsuite/ld-aarch64/farcall-b-section.d: Likewise. * testsuite/ld-aarch64/farcall-back.d: Likewise. * testsuite/ld-aarch64/farcall-bl-section.d: Likewise. gas/ * config/tc-aarch64.c (fix_insn): Implement for AARCH64_OPND_UNDEFINED. (parse_operands): Implement for AARCH64_OPND_UNDEFINED. * testsuite/gas/aarch64/udf.s: New. * testsuite/gas/aarch64/udf.d: New. * testsuite/gas/aarch64/udf-invalid.s: New. * testsuite/gas/aarch64/udf-invalid.l: New. * testsuite/gas/aarch64/udf-invalid.d: New. include * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_UNDEFINED. opcodes * aarch64-opc.h (enum aarch64_field_kind): Add FLD_imm16_2. * aarch64-opc.c (fields): Add entry for FLD_imm16_2. (operand_general_constraint_met_p): validate AARCH64_OPND_UNDEFINED. * aarch64-tbl.h (aarch64_opcode_table): Add udf instruction, entry for FLD_imm16_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-04-20[AArch64, Binutils] Add missing TSB instructionSudakshina Das1-9/+9
This patch implements the TSB instructions: https://developer.arm.com/docs/ddi0596/f/base-instructions-alphabetic-order/ tsb-csync-trace-synchronization-barrier Since TSB and PSB both use the same (and only) argument "CSYNC", this patch reuses it for TSB. However, the same argument would imply different value for CRm:Op2 which are anyway fixed values, so I have diverted the inserter/extracter function to dummy versions instead of the "hint" version. The operand checker part still uses the existing infratructure for AARCH64_OPND_BARRIER_PSB to make sure the operand is parsed correctly. gas/ChangeLog: 2020-04-20 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_barrier_psb): Update error messages to include TSB. * testsuite/gas/aarch64/system-2.d: Update -march and new tsb tests. * testsuite/gas/aarch64/system-2.s: Add new tsb tests. * testsuite/gas/aarch64/system.d: Update. opcodes/ChangeLog: 2020-04-20 Sudakshina Das <sudi.das@arm.com> * aarch64-asm.c (aarch64_ins_none): New. * aarch64-asm.h (ins_none): New declaration. * aarch64-dis.c (aarch64_ext_none): New. * aarch64-dis.h (ext_none): New declaration. * aarch64-opc.c (aarch64_print_operand): Update case for AARCH64_OPND_BARRIER_PSB. * aarch64-tbl.h (aarch64_opcode_table): Add tsb. (AARCH64_OPERANDS): Update inserter/extracter for AARCH64_OPND_BARRIER_PSB to use new dummy functions. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-04-20[AArch64, Binutils] Make hint space instructions valid for Armv8-aSudakshina Das1-8/+8
There are a few instruction in AArch64 that are in the HINT space. Any of these instructions should be accepted by the assembler/disassembler at any architecture version. This patch fixes the existing instructions that are not behaving accordingly. I have used all of the instructions mentioned in the following to make the changes: https://developer.arm.com/docs/ddi0596/f/base-instructions-alphabetic-order/ hint-hint-instruction gas/ChangeLog: 2020-04-20 Sudakshina Das <sudi.das@arm.com> * testsuite/gas/aarch64/bti.d: Update -march option. * testsuite/gas/aarch64/illegal-bti.d: Remove. * testsuite/gas/aarch64/illegal-bti.l: Remove. * testsuite/gas/aarch64/illegal-ras-1.l: Remove esb. * testsuite/gas/aarch64/illegal-ras-1.s: Remove esb. opcodes/ChangeLog: 2020-04-20 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): Remove. (aarch64_feature_ras, RAS): Likewise. (aarch64_feature_stat_profile, STAT_PROFILE): Likewise. (aarch64_opcode_table): Update bti, xpaclri, pacia1716, pacib1716, autia1716, autib1716, esb, psb, dgh, paciaz, paciasp, pacibz, pacibsp, autiaz, autiasp, autibz, autibsp to be CORE_INSN. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2020-01-27AArch64: Fix cfinv disassembly issuesTamar Christina1-8/+8
This fixes the preferred disassembly for cfinv. The Armv8.4-a instruction overlaps with the possible encoding space for msr. This because msr allows you to use unallocated encoding space using the general sA_B_cC_cD_E form. However when an encoding does become allocated then we need to ensure that it's used as the preferred disassembly. The problem with cfinv is that its mask has all bits sets because it has no arguments. This causes issues for the Alias resolver in gas as it uses the mask to build alias graph. In this case it can't do it since it thinks almost everything would alias with cfinv. So instead we can only fix this by moving cfinv before msr. gas/ChangeLog: PR 25403 * testsuite/gas/aarch64/armv8_4-a.d: Add cfinv. * testsuite/gas/aarch64/armv8_4-a.s: Likewise. opcodes/ChangeLog: PR 25403 * aarch64-tbl.h (struct aarch64_opcode): Re-order cfinv. * aarch64-asm-2.c: Regenerate * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-11-07[binutils][aarch64] Matrix Multiply extension enablement [8/X]Matthew Malcomson1-0/+1
Hi, This patch is part of a series that adds support for Armv8.6-A (Matrix Multiply and BFloat16 extensions) to binutils. This patch introduces the Matrix Multiply (Int8, F32, F64) extensions to the aarch64 backend. The following instructions are added: {s/u}mmla, usmmla, {us/su}dot, fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}. Committed on behalf of Mihail Ionescu. gas/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> * config/tc-aarch64.c: Add new arch fetures to suppport the mm extension. (parse_operands): Add new operand. * testsuite/gas/aarch64/i8mm.s: New test. * testsuite/gas/aarch64/i8mm.d: New test. * testsuite/gas/aarch64/f32mm.s: New test. * testsuite/gas/aarch64/f32mm.d: New test. * testsuite/gas/aarch64/f64mm.s: New test. * testsuite/gas/aarch64/f64mm.d: New test. * testsuite/gas/aarch64/sve-movprfx-mm.s: New test. * testsuite/gas/aarch64/sve-movprfx-mm.d: New test. include/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_I8MM): New. (AARCH64_FEATURE_F32MM): New. (AARCH64_FEATURE_F64MM): New. (AARCH64_OPND_SVE_ADDR_RI_S4x32): New. (enum aarch64_insn_class): Add new instruction class "aarch64_misc" for instructions that do not require special handling. opcodes/ChangeLog: 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> * aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve, aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm, aarch64_feature_f64mm): New feature sets. (INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN, F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply instructions. (I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set macros. (QL_MMLA64, OP_SVE_SBB): New qualifiers. (OP_SVE_QQQ): New qualifier. (INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC, F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support the movprfx constraint. (aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32. (aarch64_opcode_table): Define new instructions smmla, ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod uzip{1/2}, trn{1/2}. * aarch64-opc.c (operand_general_constraint_met_p): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32. (aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32. * aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode): Account for new instructions. * opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new S4x32 operand. * aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand. Regression tested on arm-none-eabi. Is it ok for trunk? Regards, Mihail
2019-10-30Modify the ARNM assembler to accept the omission of the immediate argument ↵Delia Burduv1-1/+1
for the writeback form of the LDRAA and LDRAB mnemonics This is a shorthand for the immediate argument being 0, as described here: https://developer.arm.com/docs/ddi0596/latest/base-instructions-alphabetic-order/ldraa-ldrab-load-register-with-pointer-authentication This is because the instructions still have a use with an immediate argument of 0, unlike loads without the PAC functionality. Currently, the mnemonics are LDRAA Xt, [Xn, #<simm10>]! LDRAB Xt, [Xn, #<simm10>]! After this patch they become LDRAA Xt, [Xn {, #<simm10>}]! LDRAB Xt, [Xn {, #<simm10>}]! gas * config/tc-aarch64.c (parse_address_main): Accept the omission of the immediate argument for ldraa and ldrab as a shorthand for the immediate being 0. * testsuite/gas/aarch64/ldraa-ldrab-no-offset.d: New test. * testsuite/gas/aarch64/ldraa-ldrab-no-offset.s: New test. * testsuite/gas/aarch64/illegal-ldraa.s: Modified to accept the writeback form with no offset. * testsuite/gas/aarch64/illegal-ldraa.s: Removed missing offset error. opcodes * aarch64-opc.c (print_immediate_offset_address): Don't print the immediate for the writeback form of ldraa/ldrab if it is 0. * aarch64-tbl.h: Updated the documentation for ADDR_SIMM10. * aarch64-opc-2.c: Regenerated.
2019-05-09[binutils][aarch64] New SVE_SHLIMM_UNPRED_22 operand.Matthew Malcomson1-0/+1
New operand describes a shift-left immediate encoded in bits 22:20-19:18-16 where UInt(bits) - esize == shift. This operand is useful for instructions like sshllb. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_SHLIMM_UNPRED_22 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_SHLIMM_UNPRED_22 operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_SHLIMM_UNPRED_22. (aarch64_print_operand): Add printing for SVE_SHLIMM_UNPRED_22. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHLIMM_UNPRED_22 operand.
2019-05-09[binutils][aarch64] New SVE_Zm4_11_INDEX operand.Matthew Malcomson1-0/+1
This includes defining a new single bit field SVE_i2h at position 20. SVE_Zm4_11_INDEX handles indexed Zn registers where the index is encoded in bits 20:11 and the register is chosed from range z0-z15 in bits 19-16. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm4_11_INDEX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm4_11_INDEX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_Zm4_11_INDEX. (aarch64_print_operand): Add printing for SVE_Zm4_11_INDEX. (fields): Handle SVE_i2h field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_i2h field. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm4_11_INDEX operand.
2019-05-09[binutils][aarch64] New SVE_SHRIMM_UNPRED_22 operand.Matthew Malcomson1-2/+3
Include a new iclass to extract the variant from the most significant 3 bits of this operand. Instructions such as rshrnb include a constant shift amount as an operand, where the most significant three bits of this operand determine what size elements the instruction is operating on. The new SVE_SHRIMM_UNPRED_22 operand denotes this constant encoded in bits 22:20-19:18-16 while the new sve_shift_tsz_hsd iclass denotes that the SVE qualifier is encoded in bits 22:20-19. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_SHRIMM_UNPRED_22 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_SHRIMM_UNPRED_22 operand. (enum aarch64_insn_class): Add sve_shift_tsz_hsd iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-asm.c (aarch64_ins_sve_shrimm): (aarch64_encode_variant_using_iclass): Handle sve_shift_tsz_hsd iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_shift_tsz_hsd iclass decode. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_SHRIMM_UNPRED_22. (aarch64_print_operand): Add printing for SVE_SHRIMM_UNPRED_22. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHRIMM_UNPRED_22 operand.
2019-05-09[binutils][aarch64] New SVE_ADDR_ZX operand.Matthew Malcomson1-0/+1
Add AARCH64_OPND_SVE_ADDR_ZX operand that allows a vector of addresses in a Zn register, offset by an Xm register. This is used with scatter/gather SVE2 instructions. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (REG_ZR): Macro specifying zero register. (parse_address_main): Account for new addressing mode [Zn.S, Xm]. (parse_operands): Handle new SVE_ADDR_ZX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_ADDR_ZX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_ADDR_ZX. (aarch64_print_operand): Add printing for SVE_ADDR_ZX. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_ADDR_ZX operand.
2019-05-09[binutils][aarch64] New SVE_Zm3_11_INDEX operand.Matthew Malcomson1-0/+1
Introduce new operand SVE_Zm3_11_INDEX that indicates a register between z0-z7 stored in bits 18-16 and an index stored in bits 20-19:11. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm3_11_INDEX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm3_11_INDEX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_Zm3_11_INDEX. (aarch64_print_operand): Add printing for SVE_Zm3_11_INDEX. (fields): Handle SVE_i3l and SVE_i3h2 fields. * aarch64-opc.h (enum aarch64_field_kind): New SVE_i3l and SVE_i3h2 fields. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm3_11_INDEX operand.
2019-05-09[binutils][aarch64] Introduce SVE_IMM_ROT3 operand.Matthew Malcomson1-0/+1
New operand AARCH64_OPND_SVE_IMM_ROT3 handles a single bit rotate operand encoded at bit position 10. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_IMM_ROT3 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_IMM_ROT3 operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_IMM_ROT3. (aarch64_print_operand): Add printing for SVE_IMM_ROT3. (fields): Handle SVE_rot3 field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_rot3 field. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_IMM_ROT3 operand.
2019-05-01[BINUTILS, AArch64] Enable Transactional Memory ExtensionSudakshina Das1-9/+10
This patch enables the new Transactional Memory Extension added recently as part of Arm's new architecture technologies. We introduce a new optional extension "tme" to enable this. The following instructions are part of the extension: * tstart <Xt> * ttest <Xt> * tcommit * tcancel #<imm> The ISA for the above can be found here: https://developer.arm.com/docs/ddi0602/latest/base-instructions-alphabetic-order *** gas/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add case for AARCH64_OPND_TME_UIMM16. (aarch64_features): Add "tme". * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/tme-invalid.d: New test. * testsuite/gas/aarch64/tme-invalid.l: New test. * testsuite/gas/aarch64/tme-invalid.s: New test. * testsuite/gas/aarch64/tme.d: New test. * testsuite/gas/aarch64/tme.s: New test. *** include/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_TME): New. (enum aarch64_opnd): Add AARCH64_OPND_TME_UIMM16. *** opcodes/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Add case for AARCH64_OPND_TME_UIMM16. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_IMM_NIL): New. (TME): New. (_TME_INSN): New. (struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel.
2019-04-11[BINUTILS, AArch64, 2/2] Update Store Allocation Tag instructionsSudakshina Das1-0/+1
This patch updates the Store allocation tags instructions in Armv8.5-A Memory Tagging Extension. This is part of the changes that have been introduced recently in the 00bet10 release All of these instructions have an updated register operand (Xt -> <Xt|SP>) - STG <Xt|SP>, [<Xn|SP>, #<simm>] - STG <Xt|SP>, [<Xn|SP>, #<simm>]! - STG <Xt|SP>, [<Xn|SP>], #<simm> - STZG <Xt|SP>, [<Xn|SP>, #<simm>] - STZG <Xt|SP>, [<Xn|SP>, #<simm>]! - STZG <Xt|SP>, [<Xn|SP>], #<simm> - ST2G <Xt|SP>, [<Xn|SP>, #<simm>] - ST2G <Xt|SP>, [<Xn|SP>, #<simm>]! - ST2G <Xt|SP>, [<Xn|SP>], #<simm> - STZ2G <Xt|SP>, [<Xn|SP>, #<simm>] - STZ2G <Xt|SP>, [<Xn|SP>, #<simm>]! - STZ2G <Xt|SP>, [<Xn|SP>], #<simm> In order to accept <Rt|SP> a new operand type Rt_SP is introduced which has the same field as FLD_Rt but follows other semantics of Rn_SP. *** gas/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (process_omitted_operand): Add case for AARCH64_OPND_Rt_SP. (parse_operands): Likewise. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Update tests. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. *** include/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_Rt_SP. *** opcodes/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (aarch64_print_operand): Add case for AARCH64_OPND_Rt_SP. (verify_constraints): Likewise. * aarch64-tbl.h (QL_LDST_AT): Update to add SP qualifier. (struct aarch64_opcode): Update stg, stzg, st2g, stz2g instructions to accept Rt|SP as first operand. (AARCH64_OPERANDS): Add new Rt_SP. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2019-04-11[BINUTILS, AArch64, 1/2] Add new LDGM/STGM instructionSudakshina Das1-15/+15
This patch adds the new LDGM/STGM instructions of the Armv8.5-A Memory Tagging Extension. This is part of the changes that have been introduced recently in the 00bet10 release The instructions are as follows: LDGM Xt, [<Xn|SP>] STGM Xt, [<Xn|SP>] *** gas/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for ldgm and stgm. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. *** opcodes/ChangeLog *** 2019-04-11 Sudakshina Das <sudi.das@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. * aarch64-tbl.h (aarch64_opcode): Add new ldgm and stgm.
2019-01-25AArch64: Add new STZGM instruction for Armv8.5-A Memory Tagging Extension.Sudi Das1-16/+16
This patch is part of a series of patches to introduce a few changes to the Armv8.5-A Memory Tagging Extension. This patch adds the new STZGM instruction. STGZM Xt, [<Xn|SP>] Committed on behalf of Sudakshina Das. *** gas/ChangeLog *** * testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for stzgm. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. *** opcodes/ChangeLog *** * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. * aarch64-tbl.h (aarch64_opcode): Add new stzgm.
2019-01-25AArch64: Remove ldgv and stgv instructions from Armv8.5-A Memory Tagging ↵Sudi Das1-16/+15
Extension. This patch is part of a series of patches to introduce a few changes to the Armv8.5-A Memory Tagging Extension. This patch removes the LDGV and STGV instructions. These instructions needed special infrastructure to support [base]! style for addressing mode. That is also removed now. Committed on behalf of Sudakshina Das. *** gas/ChangeLog *** * config/tc-aarch64.c (parse_address_main): Remove support for [base]! address expression. (parse_operands): Remove support for AARCH64_OPND_ADDR_SIMPLE_2. (warn_unpredictable_ldst): Remove support for ldstgv_indexed. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Remove tests for ldgv and stgv. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. *** include/ChangeLog *** * opcode/aarch64.h (enum aarch64_opnd): Remove AARCH64_OPND_ADDR_SIMPLE_2. (enum aarch64_insn_class): Remove ldstgv_indexed. *** opcodes/ChangeLog *** * aarch64-asm.c (aarch64_ins_addr_simple_2): Remove. * aarch64-asm.h (ins_addr_simple_2): Likeiwse. * aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise. * aarch64-dis.h (ext_addr_simple_2): Likewise. * aarch64-opc.c (operand_general_constraint_met_p): Remove case for ldstgv_indexed. (aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2. * aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv. (AARCH64_OPERANDS): Remove ADDR_SIMPLE_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-11-12[BINUTILS, AARCH64, 6/8] Add Tag getting instruction in Memory Tagging ExtensionSudakshina Das1-15/+16
This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Bulk Allocation Tag instructions from MTE. These are the following instructions added in this patch: - LDGV <Xt>, [<Xn|SP>]! - STGV <Xt>, [<Xn|SP>]! This needed a new kind of operand for the new addressing [<Xn|SP>]! since this has no offset and only takes a pre-indexed version. Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced. (AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does not allow writeback). We also needed new encoding and decoding functions to be able to do the same. where <Xt> : Is the 64-bit destination GPR. <Xn|SP> : Is the 64-bit first source GPR or Stack pointer. *** include/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2. (aarch64_insn_class): Add ldstgv_indexed. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-asm.c (aarch64_ins_addr_simple_2): New. * aarch64-asm.h (ins_addr_simple_2): Declare the above. * aarch64-dis.c (aarch64_ext_addr_simple_2): New. * aarch64-dis.h (ext_addr_simple_2): Declare the above. * aarch64-opc.c (operand_general_constraint_met_p): Add case for AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed. (aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2. * aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv. (AARCH64_OPERANDS): Define ADDR_SIMPLE_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add switch case for AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it. (warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise.
2018-11-12[BINUTILS, AARCH64, 5/8] Add Tag getting instruction in Memory Tagging ExtensionSudakshina Das1-16/+16
This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Tag Getting instruction from Memory Tagging Extension. - LDG <Xt>, [<Xn|SP>, #<simm>] where <Xt> : Is the 64-bit destination GPR. <Xn|SP> : Is the 64-bit first source GPR or Stack pointer. <simm> : Is the optional signed immediate offset, a multiple of 16 in the range of -4096 and 4080, defaulting to 0. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (QL_LDG): New. (aarch64_opcode_table): Add ldg. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldg. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise.
2018-11-12[BINUTILS, AARCH64, 4/8] Add Tag setting instructions in Memory Tagging ↵Sudakshina Das1-37/+39
Extension This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Tag setting instructions from MTE which consists of the following instructions: - STG [<Xn|SP>, #<simm>] - STG [<Xn|SP>, #<simm>]! - STG [<Xn|SP>], #<simm> - STZG [<Xn|SP>, #<simm>] - STZG [<Xn|SP>, #<simm>]! - STZG [<Xn|SP>], #<simm> - ST2G [<Xn|SP>, #<simm>] - ST2G [<Xn|SP>, #<simm>]! - ST2G [<Xn|SP>], #<simm> - STZ2G [<Xn|SP>, #<simm>] - STZ2G [<Xn|SP>, #<simm>]! - STZ2G [<Xn|SP>], #<simm> - STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>] - STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]! - STGP <Xt>, <Xt2>, [<Xn|SP>], #<imm> where <Xn|SP> : Is the 64-bit GPR or Stack pointer. <simm> : Is the optional signed immediate offset, a multiple of 16 in the range -4096 to 4080, defaulting to 0. *** include/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13. (aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (aarch64_opnd_qualifiers): Add new data for AARCH64_OPND_QLF_imm_tag. (operand_general_constraint_met_p): Add case for AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_LDST_AT, QL_STGP): New. (aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp for both offset and pre/post indexed versions. (AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add switch case for AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13. (fix_insn): Likewise. (warn_unpredictable_ldst): Exempt STGP. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g, stzg, stz2g and stgp. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise.
2018-11-12[BINUTILS, AARCH64, 3/8] Add Pointer Arithmetic instructions in Memory ↵Sudakshina Das1-34/+34
Tagging Extension This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Pointer Arithmetic instructions from MTE. These are the following instructions added in this patch: - SUBP <Xd>, <Xn|SP>, <Xm|SP> - SUBPS <Xd>, <Xn|SP>, <Xm|SP> - CMPP <Xn|SP>, <Xm|SP> where CMPP is an alias to SUBPS XZR, <Xn|SP>, <Xm|SP> where <Xd> : Is the 64-bit destination GPR. <Xn|SP> : Is the 64-bit first source GPR or Stack pointer. <Xm|SP> : Is the 64-bit second source GPR or Stack pointer. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_opcode_table): Add subp, subps and cmpp. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for subp, subps and cmpp. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise.
2018-11-12[BINUTILS, AARCH64, 2/8] Add Tag generation instructions in Memory Tagging ↵Sudakshina Das1-57/+59
Extension This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Tag generation instructions from MTE. These are the following instructions added in this patch: - IRG <Xd|SP>, <Xn|SP>{, Xm} - ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2> - SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2> - GMI <Xd>, <Xn|SP>, <Xm> where <Xd|SP> : Is the 64-bit destination GPR or Stack pointer. <Xn|SP> : Is the 64-bit source GPR or Stack pointer. <uimm6> : Is the unsigned immediate, a multiple of 16 in the range 0 to 1008. <uimm4> : Is the unsigned immediate, in the range 0 to 15. *** include/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3. (OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New. * aarch64-opc.c (fields): Add entry for imm4_3. (operand_general_constraint_met_p): Add cases for AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_ADDG): New. (aarch64_opcode_table): Add addg, subg, irg and gmi. (AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10. * aarch64-asm.c (aarch64_ins_imm): Add case for operand_need_shift_by_four. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add switch case for AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10. * testsuite/gas/aarch64/armv8_5-a-memtag.s: New. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.d: Likewise.
2018-10-09[PATCH, BINUTILS, AARCH64, 7/9] Add BTI instructionSudakshina Das1-8/+9
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/bti-branch-target-identification) The Branch Target Identification instructions (BTI) are allocated to existing HINT space, using HINT numbers 32, 34, 36, 38, such that bits[7:6] of the instruction identify the compatibility of the BTI instruction to different branches. BTI {<targets>} where <targets> one of the following, specifying which type of indirection is allowed: j : Can be a target of any BR Xn isntruction. c : Can be a target of any BLR Xn and BR {X16|X17}. jc: Can be a target of any free branch. A BTI instruction without any <targets> is the strictest of all and can not be a target of nay free branch. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_BTI): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_BTI by default. (aarch64_opnd): Add AARCH64_OPND_BTI_TARGET. (HINT_OPD_CSYNC, HINT_OPD_C, HINT_OPD_J): New macros to define HINT #imm values. (HINT_OPD_JC, HINT_OPD_NULL): Likewise. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New. (HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag with the hint immediate. * aarch64-opc.c (aarch64_hint_options): New entries for c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI. (aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET while checking for HINT_OPD_F_NOPRINT flag. * aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to extract value. * aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New. (aarch64_opcode_table): Add entry for BTI. (AARCH64_OPERANDS): Add new description for BTI targets. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_bti_operand): New. (process_omitted_operand): Add case for AARCH64_OPND_BTI_TARGET. (parse_operands): Likewise. * testsuite/gas/aarch64/system.d: Update for BTI. * testsuite/gas/aarch64/bti.s: New. * testsuite/gas/aarch64/bti.d: New. * testsuite/gas/aarch64/illegal-bti.d: New. * testsuite/gas/aarch64/illegal-bti.l: New.
2018-10-09[PATCH, BINUTILS, AARCH64, 4/9] Add Execution and Data Restriction instructionsSudakshina Das1-8/+9
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order) This patch adds the prediction restriction instructions (that is, cfp, dvp, cpp). These instructions are retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a new +predres which can be used by the older architectures. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default. (aarch64_opnd): Add AARCH64_OPND_SYSREG_SR. (aarch64_sys_regs_sr): Declare new table. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-dis.c (aarch64_ext_sysins_op): Add case for AARCH64_OPND_SYSREG_SR. * aarch64-opc.c (aarch64_print_operand): Likewise. (aarch64_sys_regs_sr): Define table. (aarch64_sys_ins_reg_supported_p): Check for RCTX with AARCH64_FEATURE_PREDRES. * aarch64-tbl.h (aarch64_feature_predres): New. (PREDRES, PREDRES_INSN): New. (aarch64_opcode_table): Add entries for cfp, dvp and cpp. (AARCH64_OPERANDS): Add new description for SYSREG_SR. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New. (parse_operands): Add entry for AARCH64_OPND_SYSREG_SR. (md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh with aarch64_sys_regs_sr. (aarch64_features): Add new "predres" option for older architectures. * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/sysreg-4.s: New. * testsuite/gas/aarch64/sysreg-4.d: New. * testsuite/gas/aarch64/illegal-sysreg-4.d: New. * testsuite/gas/aarch64/illegal-sysreg-4.l: New. * testsuite/gas/aarch64/predres.s: New. * testsuite/gas/aarch64/predres.d: New.
2018-10-09[PATCH, BINUTILS, AARCH64, 3/9] Add instruction SB for ARMv8.5-ASudakshina Das1-8/+8
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order) This instruction is retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence a new command line option of "+sb" is added for older architectures. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SB): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_sb): New. (SB, SB_INSN): New. (aarch64_opcode_table): Add entry for sb. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): Add new "sb" option for older architectures. * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/sb.s: New. * testsuite/gas/aarch64/sb.d: New.
2018-10-09[PATCH, BINUTILS, AARCH64, 2/9] Add Data procoessing instructions for ARMv8.5-ASudakshina Das1-69/+69
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order) This patch adds the data processing instructions that are new to ARMv8.5-A. 1) There are 2 instructions: xaflag, axflag, that are added to manipulate the states of the flag and are used to convert between the Arm representation and the fcmp representation. 2) The other instructions are rounding instructions which have 8 versions based on whether the floating-point number is a Single-Precision or Double-Precision number, whether the target integer is a 32-bit or 64-bit integer and whether the rounding mode is the ambient rounding mode or to zero. Each of these instruction is available in both Scalar and Vector forms. Since both 1) and 2) have separate identification mechanism and it is permissible that a ARMv8.4 compliant implementation may include any arbitrary subset of the ARMv8.5 features unless otherwise specified, new feature bits are added. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_FLAGMANIP): New. (AARCH64_FEATURE_FRINTTS): New. (AARCH64_ARCH_V8_5): Add both by default. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_flagmanip): New. (aarch64_feature_frintts): New. (FLAGMANIP, FRINTTS): New. (aarch64_opcode_table): Add entries for xaflag, axflag and frint[32,64][x,z] instructions. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * testsuite/gas/aarch64/armv8_5-a-dp.s: New. * testsuite/gas/aarch64/armv8_5-a-dp.d: New.
2018-07-12This patch adds support for the SSBB and PSSBB speculation barrier ↵Nick Clifton1-8/+8
instructions to the AArch64 assembler and disassembler. For more details see: https://static.docs.arm.com/ddi0596/a/DDI_0596_ARM_a64_instruction_set_architecture.pdf opcodes * aarch64-tbl.h (aarch64_opcode_table): Add entry for ssbb and pssbb and update dsb flags to F_HAS_ALIAS. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas * testsuite/gas/aarch64/system.s: Add test for ssbb and pssbb. * testsuite/gas/aarch64/system.d: Update accordingly and remove explicit addresses.
2018-06-29Fix AArch64 encodings for by element instructions.Tamar Christina1-0/+1
Some instructions in Armv8-a place a limitation on FP16 registers that can be used as the register from which to select an element from. e.g. fmla restricts Rm to 4 bits when using an FP16 register. This restriction does not apply for all instructions, e.g. fcmla does not have this restriction as it gets an extra bit from the M field. Unfortunately, this restriction to S_H was added for all _Em operands before, meaning for a large number of instructions you couldn't use the full register file. This fixes the issue by introducing a new operand _Em16 which applies this restriction only when paired with S_H and leaves the _Em and the other qualifiers for _Em16 unbounded (i.e. using the full 5 bit range). Also the patch updates all instructions that should be affected by this. opcodes/ PR binutils/23192 * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. * aarch64-dis.c (aarch64_ext_reglane): Add AARCH64_OPND_Em16 constraint. * aarch64-opc.c (operand_general_constraint_met_p, aarch64_print_operand): Likewise. * aarch64-tbl.h (aarch64_opcode_table): Change Em to Em16 for smlal, smlal2, fmla, fmls, fmul, fmulx, sqrdmlah, sqrdlsh, fmlal, fmlsl, fmlal2, fmlsl2. (AARCH64_OPERANDS): Add Em2. gas/ PR binutils/23192 * config/tc-aarch64.c (process_omitted_operand, parse_operands): Add AARCH64_OPND_Em16 * testsuite/gas/aarch64/advsimd-armv8_3.s: Expand tests to cover upper 16 registers. * testsuite/gas/aarch64/advsimd-armv8_3.d: Likewise. * testsuite/gas/aarch64/advsimd-compnum.s: Likewise. * testsuite/gas/aarch64/advsimd-compnum.d: Likewise. * testsuite/gas/aarch64/sve.d: Likewise. include/ PR binutils/23192 *opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_Em16.
2018-03-28Enhance the AARCH64 assembler to support LDFF1xx instructions which use ↵Nick Clifton1-0/+1
REG+REG addressing with an assumed offset register. PR 22988 opcode * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_SVE_ADDR_R. opcodes * aarch64-tbl.h (aarch64_opcode_table): Add entries for LDFF1xx instructions with only a base address register. * aarch64-opc.c (operand_general_constraint_met_p): Add code to handle AARHC64_OPND_SVE_ADDR_R. (aarch64_print_operand): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64_dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas * config/tc-aarch64.c (parse_operands): Add code to handle AARCH64_OPN_SVE_ADDR_R. * testsuite/gas/aarch64/sve.s: Add tests for LDFF1xx instructions with an assumed XZR offset address register. * testsuite/gas/aarch64/sve.d: Update expected disassembly.
2018-01-09Add support for the AArch64's CSDB instruction.James Greenhalgh1-8/+8
CSDB is a new instruction which Arm has defined. It has the same encoding as HINT #0x14 and is available at all architecture levels. opcodes * aarch64-tbl.h (aarch64_opcode_table): Add "csdb". * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas * testsuite/gas/aarch64/system.d: Update expected results to expect CSDB.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-11-09Adds the new Fields and Operand types for the new instructions in Armv8.4-a.Tamar Christina1-0/+5
gas/ * config/tc-aarch64.c (process_omitted_operand): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2 and AARCH64_OPND_IMM_2. (parse_operands): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2, AARCH64_OPND_IMM_2, AARCH64_OPND_MASK and AARCH64_OPND_ADDR_OFFSET. include/ * opcode/aarch64.h: (aarch64_opnd): Add AARCH64_OPND_Va, AARCH64_OPND_MASK, AARCH64_OPND_IMM_2, AARCH64_OPND_ADDR_OFFSET and AARCH64_OPND_SM3_IMM2. (aarch64_insn_class): Add cryptosm3 and cryptosm4. (arch64_feature_set): Make uint64_t. opcodes/ * aarch64-asm.h (ins_addr_offset): New. * aarch64-asm.c (aarch64_ins_reglane): Add cryptosm3. (aarch64_ins_addr_offset): New. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_addr_offset): New. * aarch64-dis.c (aarch64_ext_reglane): Add cryptosm3. (aarch64_ext_addr_offset): New. * aarch64-dis-2.c: Regenerate. * aarch64-opc.h (aarch64_field_kind): Add FLD_imm6_2, FLD_imm4_2 and FLD_SM3_imm2. * aarch64-opc.c (fields): Add FLD_imm6_2, FLD_imm4_2 and FLD_SM3_imm2. (operand_general_constraint_met_p): Add AARCH64_OPND_ADDR_OFFSET. (aarch64_print_operand): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2, AARCH64_OPND_MASK, AARCH64_OPND_IMM_2 and AARCH64_OPND_ADDR_OFFSET. * aarch64-opc-2.c (Va, MASK, IMM_2, ADDR_OFFSET, SM3_IMM2): New. * aarch64-tbl.h (aarch64_opcode_table): Add Va, MASK, IMM_2, ADDR_OFFSET, SM3_IMM2.
2017-02-24[AArch64] Additional SVE instructionsRichard Sandiford1-0/+6
This patch supports some additions to the SVE architecture prior to its public release. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4x16) (AARCH64_OPND_SVE_IMM_ROT1, AARCH64_OPND_SVE_IMM_ROT2) (AARCH64_OPND_SVE_Zm3_INDEX, AARCH64_OPND_SVE_Zm3_22_INDEX) (AARCH64_OPND_SVE_Zm4_INDEX): New aarch64_opnds. opcodes/ * aarch64-tbl.h (OP_SVE_HMH, OP_SVE_VMU_HSD, OP_SVE_VMVU_HSD) (OP_SVE_VMVV_HSD, OP_SVE_VMVVU_HSD, OP_SVE_VM_HSD, OP_SVE_VUVV_HSD) (OP_SVE_VUV_HSD, OP_SVE_VU_HSD, OP_SVE_VVVU_H, OP_SVE_VVVU_S) (OP_SVE_VVVU_HSD, OP_SVE_VVV_D, OP_SVE_VVV_D_H, OP_SVE_VVV_H) (OP_SVE_VVV_HSD, OP_SVE_VVV_S, OP_SVE_VVV_S_B, OP_SVE_VVV_SD_BH) (OP_SVE_VV_BHSDQ, OP_SVE_VV_HSD, OP_SVE_VZVV_HSD, OP_SVE_VZV_HSD) (OP_SVE_V_HSD): New macros. (OP_SVE_VMU_SD, OP_SVE_VMVU_SD, OP_SVE_VM_SD, OP_SVE_VUVV_SD) (OP_SVE_VU_SD, OP_SVE_VVVU_SD, OP_SVE_VVV_SD, OP_SVE_VZVV_SD) (OP_SVE_VZV_SD, OP_SVE_V_SD): Delete. (aarch64_opcode_table): Add new SVE instructions. (aarch64_opcode_table): Use imm_rotate{1,2} instead of imm_rotate for rotation operands. Add new SVE operands. * aarch64-asm.h (ins_sve_addr_ri_s4): New inserter. (ins_sve_quad_index): Likewise. (ins_imm_rotate): Split into... (ins_imm_rotate1, ins_imm_rotate2): ...these two inserters. * aarch64-asm.c (aarch64_ins_imm_rotate): Split into... (aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2): ...these two functions. (aarch64_ins_sve_addr_ri_s4): New function. (aarch64_ins_sve_quad_index): Likewise. (do_misc_encoding): Handle "MOV Zn.Q, Qm". * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_addr_ri_s4): New extractor. (ext_sve_quad_index): Likewise. (ext_imm_rotate): Split into... (ext_imm_rotate1, ext_imm_rotate2): ...these two extractors. * aarch64-dis.c (aarch64_ext_imm_rotate): Split into... (aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2): ...these two functions. (aarch64_ext_sve_addr_ri_s4): New function. (aarch64_ext_sve_quad_index): Likewise. (aarch64_ext_sve_index): Allow quad indices. (do_misc_decoding): Likewise. * aarch64-dis-2.c: Regenerate. * aarch64-opc.h (FLD_SVE_i3h, FLD_SVE_rot1, FLD_SVE_rot2): New aarch64_field_kinds. (OPD_F_OD_MASK): Widen by one bit. (OPD_F_NO_ZR): Bump accordingly. (get_operand_field_width): New function. * aarch64-opc.c (fields): Add new SVE fields. (operand_general_constraint_met_p): Handle new SVE operands. (aarch64_print_operand): Likewise. * aarch64-opc-2.c: Regenerate. gas/ * doc/c-aarch64.texi: Document that sve implies fp16, simd and compnum. * config/tc-aarch64.c (parse_vector_type_for_operand): Allow .q to be used with SVE registers. (parse_operands): Handle new SVE operands. (aarch64_features): Make "sve" require F16 rather than FP. Also require COMPNUM. * testsuite/gas/aarch64/sve.s: Add tests for new instructions. Include compnum tests. * testsuite/gas/aarch64/sve.d: Update accordingly. * testsuite/gas/aarch64/sve-invalid.s: Add tests for new instructions. * testsuite/gas/aarch64/sve-invalid.l: Update accordingly. Also update expected output for new FMOV and MOV alternatives.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-13[Binutils][AARCH64]Remove Cn register for coprocessor CRn, CRm fieldRenlin Li1-2/+2
The internal CN register representation for coprocessor fields used in aarch64 sys, sysl instructions are removed in this patch. After the change, those fields are represented as immediate. Related checks are added as well. opcodes/ * aarch64-opc.c (aarch64_opnd_qualifiers): New CR value range qualifier. (operand_general_constraint_met_p): Remove case for CP_REG. (aarch64_print_operand): Print CRn, CRm operand using imm field. * aarch64-tbl.h (QL_SYS): Use CR qualifier. (QL_SYSL): Likewise. (aarch64_opcode_table): Change CRn, CRm operand class and type. * aarch64-opc-2.c : Regenerate. * aarch64-asm-2.c : Likewise. * aarch64-dis-2.c : Likewise. include/ * opcode/aarch64.h (aarch64_operand_class): Remove AARCH64_OPND_CLASS_CP_REG. (enum aarch64_opnd): Change AARCH64_OPND_Cn to AARCH64_OPND_CRn, AARCH64_OPND_Cm to AARCH64_OPND_CRm. (aarch64_opnd_qualifier): Define AARCH64_OPND_QLF_CR qualifier. gas/ * config/tc-aarch64.c (AARCH64_REG_TYPES): Remove CN register. (get_reg_expected_msg): Remove CN register case. (parse_operands): rewrite parser for CRn, CRm operand. (reg_names): Remove CN register. * testsuite/gas/aarch64/diagnostic.s: Add a new test case. * testsuite/gas/aarch64/diagnostic.l: Adjust error message.
2016-11-18[AArch64] Add ARMv8.3 FCMLA and FCADD instructionsSzabolcs Nagy1-53/+57
Add support for FCMLA and FCADD complex arithmetic SIMD instructions. FCMLA has an indexed element variant where the index range has to be treated specially because a complex number takes two elements and the indexed vector size depends on the other operands. These complex number SIMD instructions are part of ARMv8.3 https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_IMM_ROT1, AARCH64_OPND_IMM_ROT2, AARCH64_OPND_IMM_ROT3. (enum aarch64_op): Add OP_FCMLA_ELEM. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define. (aarch64_feature_simd_v8_3, SIMD_V8_3): Define. (aarch64_opcode_table): Add fcmla and fcadd. (AARCH64_OPERANDS): Add IMM_ROT{1,2,3}. * aarch64-asm.h (aarch64_ins_imm_rotate): Declare. * aarch64-asm.c (aarch64_ins_imm_rotate): Define. * aarch64-dis.h (aarch64_ext_imm_rotate): Declare. * aarch64-dis.c (aarch64_ext_imm_rotate): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}. * aarch64-opc.c (fields): Add FLD_rotate{1,2,3}. (operand_general_constraint_met_p): Rotate and index range check. (aarch64_print_operand): Handle rotate operand. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT*. * testsuite/gas/aarch64/advsimd-armv8_3.d: New. * testsuite/gas/aarch64/advsimd-armv8_3.s: New. * testsuite/gas/aarch64/illegal-fcmla.s: New. * testsuite/gas/aarch64/illegal-fcmla.l: New. * testsuite/gas/aarch64/illegal-fcmla.d: New.
2016-11-18[AArch64] Add ARMv8.3 weaker release consistency load instructionsSzabolcs Nagy1-18/+18
Add support for ARMv8.3 LDAPRB, LDAPRH and LDAPR weak release consistency load instructions. (They are equivalent to LDARB, LDARH and LDAR instructions other than the weaker memory ordering requirement.) For more details about weak release consistency see https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (arch64_opcode_table): Add ldaprb, ldaprh, ldapr. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * testsuite/gas/aarch64/ldst-exclusive-armv8_3.s: Add ldaprb, ldaprh, ldapr tests. * testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Likewise. * testsuite/gas/aarch64/illegal-ldapr.s: Likewise. * testsuite/gas/aarch64/illegal-ldapr.d: Likewise. * testsuite/gas/aarch64/illegal-ldapr.l: Likewise.
2016-11-18[AArch64] Add ARMv8.3 javascript floating-point conversion instructionSzabolcs Nagy1-25/+25
Add support for ARMv8.3 FJCVTZS floating-point conversion instruction. For details about javascript floating-point conversion see https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (arch64_opcode_table): Add fjcvtzs. (QL_FP2INT_W_D, aarch64_feature_fp_v8_3, FP_V8_3): Define. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * testsuite/gas/aarch64/fp-armv8_3.s: Add fjcvtzs test. * testsuite/gas/aarch64/fp-armv8_3.d: Likewise. * testsuite/gas/aarch64/illegal-fjcvtzs.s: Likewise. * testsuite/gas/aarch64/illegal-fjcvtzs.d: Likewise. * testsuite/gas/aarch64/illegal-fjcvtzs.l: Likewise. * testsuite/gas/aarch64/illegal-nofp-armv8_3.s: Likewise. * testsuite/gas/aarch64/illegal-nofp-armv8_3.d: Likewise. * testsuite/gas/aarch64/illegal-nofp-armv8_3.l: Likewise.
2016-11-18[AArch64] Add ARMv8.3 combined pointer authentication load instructionsSzabolcs Nagy1-15/+16
Add support for ARMv8.3 LDRAA and LDRAB combined pointer authentication and load instructions. These instructions authenticate the base register and load 8 byte from it plus a scaled 10-bit offset with optional writeback to update the base register. A new instruction class (ldst_imm10) and operand type (AARCH64_OPND_ADDR_SIMM10) were introduced to handle the special addressing form. include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM10. (enum aarch64_insn_class): Add ldst_imm10. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_X1NIL): New. (arch64_opcode_table): Add ldraa, ldrab. (AARCH64_OPERANDS): Add "ADDR_SIMM10". * aarch64-asm.h (aarch64_ins_addr_simm10): Declare. * aarch64-asm.c (aarch64_ins_addr_simm10): Define. * aarch64-dis.h (aarch64_ext_addr_simm10): Declare. * aarch64-dis.c (aarch64_ext_addr_simm10): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_S_simm10. * aarch64-opc.c (fields): Add data for FLD_S_simm10. (operand_general_constraint_met_p): Handle AARCH64_OPND_ADDR_SIMM10. (aarch64_print_operand): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_ADDR_SIMM10. (fix_insn): Likewise. (warn_unpredictable_ldst): Handle ldst_imm10. * testsuite/gas/aarch64/pac.s: Add ldraa and ldrab tests. * testsuite/gas/aarch64/pac.d: Likewise. * testsuite/gas/aarch64/illegal-ldraa.s: New. * testsuite/gas/aarch64/illegal-ldraa.l: New. * testsuite/gas/aarch64/illegal-ldraa.d: New.
generated by cgit v1.1 at 2024-11-22 19:29:02 +0000