aboutsummaryrefslogtreecommitdiff
path: root/ld
AgeCommit message (Collapse)AuthorFilesLines
2019-11-12RISC-V: Fix ld relax failure with calls and align directives.Jim Wilson7-0/+51
Make _bfd_riscv_relax_call handle section alignment padding same as the _bfd_riscv_relax_lui and _bfd_riscv_relax_pc functions already do. Use the max section alignment if section boundaries are crossed, otherwise the alignment of the containing section. bfd/ PR 25181 * elfnn-riscv.c (_bfd_riscv_relax_call): Always add max_alignment to foff. If sym_sec->output_section and sec->output_section are the same and not *ABS* then set max_alignment to that section's alignment. ld/ PR 25181 * testsuite/ld-riscv-elf/call-relax-0.s: New file. * testsuite/ld-riscv-elf/call-relax-1.s: New file. * testsuite/ld-riscv-elf/call-relax-2.s: New file. * testsuite/ld-riscv-elf/call-relax-3.s: New file. * testsuite/ld-riscv-elf/call-relax.d: New test. * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run call-relax test. Change-Id: Iaf65cee52345abf1955f36e8e72c4f6cc0db8d9a
2019-11-08Revert "GENERATE_SHLIB_SCRIPT vs. EMBEDDED."Alan Modra15-9/+35
This reverts commit f2aaebdb97977ee7a5c83c02af871e758e7d594b. My reasons for making that change were just plain wrong.
2019-11-07Remove CR16C supportAlan Modra8-79/+12
I think it is past time to remove CR16C support. CR16C was added in 2004, and only for ld. gas and binutils support is lacking, and there have been no commits to bfd/elf32-cr16c.c other than warning fixes or global maintainers making changes to all targets. I see no maintainer listed for CR16C, and no commits from anyone at NSC supporting the target. Furthermore, at the time the CR16 support was added in 2007, config.sub was changed upstream to no longer recognise cr16c as a valid cpu. That means the CR16C ld support is only available as a secondary target by configuring with, for example, --enable-targets=all or --enable-targets=cr16c-unknown-elf. No testing of the CR16C target is possible. include/ * elf/cr16c.h: Delete. bfd/ * cpu-cr16c.c: Delete. * elf32-cr16c.c: Delete. * Makefile.am, * archures.c, * config.bfd, * configure.ac, * reloc.c, * targets.c: Remove cr16c support. * Makefile.in, * bfd-in2.h, * configure, * libbfd.h, * po/SRC-POTFILES.in: Regenerate. ld/ * emulparams/elf32cr16c.sh: Delete. * scripttempl/elf32cr16c.sc: Delete. * Makefile.am, * configure.tgt: Remove cr16c support. * NEWS: Mention removal of cr16c. * Makefile.in, * po/BLD-POTFILES.in: Regenerate.
2019-11-07Order targets in ld/configure.tgtAlan Modra2-99/+100
The target list was supposed to be more or less alphabetically sorted, but this wasn't anywhere near the case. The comment about keeping architecture variants together seems odd to me, and is no doubt the reason why ix86 and x86_64 were grouped together, so I removed that comment. The patch doesn't change order of entries for a given cpu. * configure.tgt: Order targets by cpu.
2019-11-07aarch64 and arm testsuite fixes for targets lacking shared libsAlan Modra96-47/+269
* testsuite/ld-aarch64/aarch64-elf.exp: Run tests requiring pie or shared library support only when check_shared_lib_support. * testsuite/ld-aarch64/bti-pac-plt-1.d: Likewise. * testsuite/ld-aarch64/bti-pac-plt-2.d: Likewise. * testsuite/ld-aarch64/bti-plt-1.d: Likewise. * testsuite/ld-aarch64/bti-plt-2.d: Likewise. * testsuite/ld-aarch64/bti-plt-3.d: Likewise. * testsuite/ld-aarch64/bti-plt-4.d: Likewise. * testsuite/ld-aarch64/bti-plt-6.d: Likewise. * testsuite/ld-aarch64/bti-plt-7.d: Likewise. * testsuite/ld-aarch64/bti-warn.d: Likewise. * testsuite/ld-aarch64/dt_textrel.d: Likewise. * testsuite/ld-aarch64/emit-relocs-258-dyn-bad.d: Likewise. * testsuite/ld-aarch64/emit-relocs-259-dyn-bad.d: Likewise. * testsuite/ld-aarch64/emit-relocs-264-bad.d: Likewise. * testsuite/ld-aarch64/emit-relocs-266-bad.d: Likewise. * testsuite/ld-aarch64/emit-relocs-268-bad.d: Likewise. * testsuite/ld-aarch64/emit-relocs-269-bad.d: Likewise. * testsuite/ld-aarch64/emit-relocs-515-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-515.d: Likewise. * testsuite/ld-aarch64/emit-relocs-516-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-516.d: Likewise. * testsuite/ld-aarch64/farcall-b-plt.d: Likewise. * testsuite/ld-aarch64/farcall-bl-plt.d: Likewise. * testsuite/ld-aarch64/gc-plt-relocs.d: Likewise. * testsuite/ld-aarch64/gc-relocs-257-dyn.d: Likewise. * testsuite/ld-aarch64/ifunc-1-local.d: Likewise. * testsuite/ld-aarch64/ifunc-1.d: Likewise. * testsuite/ld-aarch64/ifunc-12.d: Likewise. * testsuite/ld-aarch64/ifunc-13.d: Likewise. * testsuite/ld-aarch64/ifunc-14a.d: Likewise. * testsuite/ld-aarch64/ifunc-14b.d: Likewise. * testsuite/ld-aarch64/ifunc-14c.d: Likewise. * testsuite/ld-aarch64/ifunc-14d.d: Likewise. * testsuite/ld-aarch64/ifunc-14e.d: Likewise. * testsuite/ld-aarch64/ifunc-14f.d: Likewise. * testsuite/ld-aarch64/ifunc-15.d: Likewise. * testsuite/ld-aarch64/ifunc-16.d: Likewise. * testsuite/ld-aarch64/ifunc-18a.d: Likewise. * testsuite/ld-aarch64/ifunc-18b.d: Likewise. * testsuite/ld-aarch64/ifunc-19a.d: Likewise. * testsuite/ld-aarch64/ifunc-19b.d: Likewise. * testsuite/ld-aarch64/ifunc-2-local.d: Likewise. * testsuite/ld-aarch64/ifunc-2.d: Likewise. * testsuite/ld-aarch64/ifunc-20.d: Likewise. * testsuite/ld-aarch64/ifunc-21.d: Likewise. * testsuite/ld-aarch64/ifunc-3a.d: Likewise. * testsuite/ld-aarch64/ifunc-3b.d: Likewise. * testsuite/ld-aarch64/ifunc-5b-local.d: Likewise. * testsuite/ld-aarch64/ifunc-5b.d: Likewise. * testsuite/ld-aarch64/ifunc-6b.d: Likewise. * testsuite/ld-aarch64/ifunc-7b.d: Likewise. * testsuite/ld-aarch64/ifunc-7c.d: Likewise. * testsuite/ld-aarch64/pac-plt-1.d: Likewise. * testsuite/ld-aarch64/pac-plt-2.d: Likewise. * testsuite/ld-aarch64/pcrel_pic_defined.d: Likewise. * testsuite/ld-aarch64/pcrel_pic_undefined.d: Likewise. * testsuite/ld-aarch64/pie-bind-locally.d: Likewise. * testsuite/ld-aarch64/plt_mapping_symbol.d: Likewise. * testsuite/ld-aarch64/pr20402.d: Likewise. * testsuite/ld-aarch64/pr22764.d: Likewise. * testsuite/ld-aarch64/property-bti-pac1.d: Likewise. * testsuite/ld-aarch64/protected-data.d: Likewise. * testsuite/ld-aarch64/rela-abs-relative-be.d: Likewise. * testsuite/ld-aarch64/rela-abs-relative-opt.d: Likewise. * testsuite/ld-aarch64/rela-abs-relative.d: Likewise. * testsuite/ld-aarch64/relasz.d: Likewise. * testsuite/ld-aarch64/relocs-1027-symbolic-func.d: Likewise. * testsuite/ld-aarch64/tls-desc-ie-ilp32.d: Likewise. * testsuite/ld-aarch64/tls-desc-ie.d: Likewise. * testsuite/ld-aarch64/tls-large-desc-be.d: Likewise. * testsuite/ld-aarch64/tls-large-desc.d: Likewise. * testsuite/ld-aarch64/tls-large-ie-be.d: Likewise. * testsuite/ld-aarch64/tls-large-ie.d: Likewise. * testsuite/ld-aarch64/tls-relax-gdesc-le-now.d: Likewise. * testsuite/ld-aarch64/tls-small-ld.d: Likewise. * testsuite/ld-aarch64/tls-tiny-desc.d: Likewise. * testsuite/ld-aarch64/tls-tiny-gd.d: Likewise. * testsuite/ld-aarch64/tls-tiny-ie.d: Likewise. * testsuite/ld-aarch64/tls-tiny-ld.d: Likewise. * testsuite/ld-aarch64/tlsle-symbol-offset.d: Likewise. * testsuite/ld-aarch64/tlsle.d: Likewise. * testsuite/ld-aarch64/variant_pcs-now.d: Likewise. * testsuite/ld-aarch64/variant_pcs-shared.d: Likewise. * testsuite/ld-arm/arm-elf.exp: Likewise. Remove --hash-style=sysv from static tests. Consolidate armelftests_common_* vars into one. * testsuite/ld-arm/gc-hidden-1.d: Require check_shared_lib_support. * testsuite/ld-arm/movw-shared-1.d: Likewise. * testsuite/ld-arm/movw-shared-2.d: Likewise. * testsuite/ld-arm/movw-shared-3.d: Likewise. * testsuite/ld-arm/movw-shared-4.d: Likewise. * testsuite/ld-arm/pie-bind-locally.d: Likewise. * testsuite/ld-arm/protected-data.d: Likewise. * testsuite/ld-arm/rel32-reject-pie.d: Likewise. * testsuite/ld-arm/rel32-reject.d: Likewise. * testsuite/ld-arm/thumb2-bl-undefweak.d: Likewise. * testsuite/ld-arm/thumb2-bl-undefweak1.d: Likewise.
2019-11-06ld: Fix printed sizes in map fileChristian Eggers2-2/+6
For targets with octets_per_byte > 1, testsuite/ld-scripts/rgn-over* produce wrong sizes in the generated map files: .text 0x0000000000001000 0x6 ^^^ # correct *(.txt) .txt 0x0000000000001000 0xc tmpdir/rgn-over.o ^^^ # should also be 0x6 * ldlang.c (print_input_section): Shift printed size by opb_shift.
2019-11-05GENERATE_SHLIB_SCRIPT vs. EMBEDDED.Alan Modra15-18/+31
A target that sets EMBEDDED non-empty is one that doesn't want to put the ELF file header or program header in a memory image. Likely the target isn't interested in supporting dynamically loaded executables, shared libraries, or PIEs, because loaders for such binaries generally require program headers to be present. This isn't 100% true though. The target might be one where the loader accesses the file system in order to retrieve headers. Also, note that not all "shared libraries" require gcc -shared or the shared library support in the linker. I believe one implementation of shared libraries on uclinux is like this. So, this patch removes GENERATE_SHLIB_SCRIPT and GENERATE_PIE_SCRIPT in most emulparams files where EMBEDDED is set, restoring the shared lib and pie support in emulparams files that unset EMBEDDED after including a file where the support is removed. Exceptions to the general rule that EMBEDDED disables shared libs are: arm*-*-symbianelf*, where the OS wants shared library support without ELF program headers in the image, and sh*-*-uclinux*, where I've left things as they were, ie. both EMBEDDED and GENERATE_SHLIB_SCRIPT because I'm unsure as to the shared library scheme. * emulparams/aarch64elf.sh (GENERATE_SHLIB_SCRIPT), (GENERATE_PIE_SCRIPT): Don't set. * emulparams/aarch64elf32.sh (GENERATE_SHLIB_SCRIPT), (GENERATE_PIE_SCRIPT): Don't set. * emulparams/arcelf.sh (GENERATE_SHLIB_SCRIPT): Don't set. * emulparams/armelf.sh (GENERATE_SHLIB_SCRIPT), (GENERATE_PIE_SCRIPT): Don't set. * emulparams/armelf_fbsd.sh (GENERATE_SHLIB_SCRIPT): Set. * emulparams/armelf_nbsd.sh (GENERATE_SHLIB_SCRIPT), (GENERATE_PIE_SCRIPT): Set. * emulparams/armelf_vxworks.sh (GENERATE_SHLIB_SCRIPT): Set. * emulparams/armsymbian.sh (GENERATE_SHLIB_SCRIPT): Set. * emulparams/elf32bfin.sh (GENERATE_SHLIB_SCRIPT): Don't set. * emulparams/elf32microblaze.sh (GENERATE_SHLIB_SCRIPT): Don't set. * emulparams/score3_elf.sh (GENERATE_SHLIB_SCRIPT): Don't set. * emulparams/shelf.sh (GENERATE_SHLIB_SCRIPT): Don't set. * emulparams/shelf_nbsd.sh (GENERATE_SHLIB_SCRIPT), (GENERATE_PIE_SCRIPT): Set. * emulparams/shelf_uclinux.sh (GENERATE_SHLIB_SCRIPT): Set.
2019-11-05Unset EMBEDDED rather than assigning as emptyAlan Modra5-4/+14
No real changes here, just making it that much easier to find targets that set EMBEDDED to a non-empty string. * emulparams/elf32bfinfd.sh: Unset EMBEDDED rather assigning as empty. * emulparams/elf32frvfd.sh: Likewise. * emulparams/elf32lm32fd.sh: Likewise. * emulparams/i386lynx.sh: Likewise.
2019-10-22Don't allow RELATIVE relocs in pr22269 testcaseAlan Modra3-4/+14
At least, not in the GOT. R_PPC64_RELATIVE is fine for powerpc64 in the .opd section. PR 22269 * testsuite/ld-elf/pr22269-1.rd: Look for GOT section NONE and RELATIVE relocs. * testsuite/ld-elf/shared.exp (pr22269-1): Give test a better name. Use -z nocombreloc.
2019-10-19 [ld] Fix failure of pr19161 on hppa*-*linux*.John David Anglin2-0/+11
ld/ChangeLog 2019-10-19 Alan Modra <amodra@gmail.com> PR ld/25110 * testsuite/ld-gc/gc.exp: Adjust LDFLAGS for pr19161 dump test on hppa*-*-linux*.
2019-10-17RISC-V: Report unresolved relocation error via linker's callback function.Jim Wilson5-0/+43
Two patches from Nelson Chu. It is better to use the linker's callback functions to handle the link time error when relocating. The unresolved relocation error can be regarded as an unsupported relocation. To make user easier to understand different errors, we need to extend the current error message format of the callback function since the format is fixed. bfd/ * elfnn-riscv.c (riscv_elf_relocate_section): Use asprintf to extend the error message if needed, and then store the result into the `msg_buf`. Finally, remember to free the unused `msg_buf`. All error message for the dangerous relocation should be set before we call the callback function. If we miss the error message since linker runs out of memory, we should set the default error message for the error. ld/ * testsuite/ld-riscv-elf/lib-nopic-01a.s: Create the shared library lib-nopic-01a.so, it will be linked with lib-nopic-01b.s. * testsuite/ld-riscv-elf/lib-nopic-01b.s: Add new test for the unresolved relocation. Link the non-pic code into a shared library may cause the error. * testsuite/ld-riscv-elf/lib-nopic-01b.d: Likewise. * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run the new test only when the shared library is supported. R_RISCV_CALL, R_RISCV_JAL and R_RISCV_RVC_JUMP are pc-relative relocation. For now, we do not allow the object with these relocation links into a shared library since the referenced symbols may be loaded to the places that too far from the pc. We can improve the error message for these unsupported relocation to notice user that they should recompile their code with `fPIC`. bfd/ * elfnn-riscv.c (riscv_elf_relocate_section): Report the error message that user should recompile their code with `fPIC` when linking non-pic code into shared library. ld/ * testsuite/ld-riscv-elf/lib-nopic-01b.d: Update the error message. Change-Id: Ib3347a0a6fa1c2b20a9647c314d5bec2c322ff04
2019-10-16PR13616, linker should pad executable sections with nops, not zerosAlan Modra5-66/+59
This implements padding of orphan executable sections for PowerPC. Of course, the simple implementation of bfd_arch_ppc_nop_fill and removing the NOP definition didn't work, with powerpc64 hitting a testsuite failure linking to S-records. That's because the srec target is BFD_ENDIAN_UNKNOWN so the test of bfd_big_endian (abfd) in default_data_link_order therefore returned false, resulting in a little-endian nop pattern. The rest of the patch fixes that problem by adding a new field to bfd_link_info that can be used to determine actual endianness on targets like srec. PR 13616 include/ * bfdlink.h (struct bfd_link_info <big_endian>): New field. bfd/ * cpu-powerpc.c (bfd_arch_ppc_nop_fill): New function, use it for all ppc arch info. * linker.c (default_data_link_order): Pass info->big_endian to arch_info->fill function. ld/ * emulparams/elf64lppc.sh (NOP): Don't define. * emulparams/elf64ppc.sh (NOP): Don't define. * ldwrite.c (build_link_order): Use link_info.big_endian. Move code determining endian to use for data_statement to.. * ldemul.c (after_open_default): ..here. Set link_info.big_endian.
2019-10-16genscripts comment tidyAlan Modra2-58/+45
Some of the comments in this file are ancient and no longer reflect reality. This patch removes those comments, and also the description of ld options emitted to script files. While describing what an option does in the script file might help reinforce what the option does, it's unnecessary and makes for overlong lines. Also, some of the descriptions did not mention all the options. * genscripts.sh: Correct comments. Remove outdated comment block saying "Generate 5 or 6 script files..". Remove description of ld options from comment emitted to script files, and order options as per comment block in genscripts.sh saying which scripts are generated.
2019-10-14qsort: ldctor.c CONSTRUCTORSAlan Modra3-21/+31
ctor_cmp had an ineffective comparison of addresses in an attempt to ensure sort stability. Comparing the addresses passed to the comparison function can't work since those addresses may be from an array that is already perturbed by qsort. * ldctor.h (struct set_element): Make next field a union, adding idx field. * ldctor.c (ctor_cmp): Dereference pointer and lose unnecessary const. Replace final sort on pointer value with final sort on idx. (ldctor_add_set_entry): Adjust next field access. (ldctor_build_sets): Likewise. Set u.idx field for sort.
2019-10-14qsort: pe-dll.c reloc sortingAlan Modra2-3/+19
* pe-dll.c (reloc_data_type): Add idx field. (reloc_sort): Perform final sort by idx. (generate_reloc): Set idx.
2019-10-13Update the README-how-to-make-a-release file with a note to reset the ↵Nick Clifton2-2/+4
development flag back to true after making a point release. Aldo fix a typo in the ld/NEWS file. binutils* README-how-to-make-a-release: Add a note to reset the development flag back to true after making a point release. ld * NEWS: Delete superflous "Changes in 2.33" comment.
2019-10-09PR25081, Discrepancy between VMA and LMA after ALIGNAlan Modra2-1/+7
The testcase in the PR has two empty output sections, .sec1 with an ALIGN and symbol assignment, and .sec2 just with an empty input section. The symbol assignment results in .sec1 being kept, but because it is empty this section doesn't take space from the memory region as you might expect from the ALIGN. Instead the next section .sec2, has vma/lma as if .sec1 wasn't present. However, .sec2 is discarded and os->ignored set, which unfortunately meant that dot wasn't set from .sec2 vma. That in turn results in .sec2 lma being set incorrectly. That vma/lma difference is then propagated to .sec3 where it is seen as an overlap. PR 25081 * ldlang.c (lang_size_sections_1): Set lma from section vma rather than dot.
2019-10-09PowerPC local got testAlan Modra4-0/+20
This is the one that causes ld segfaults between 2019-10-04 and 2019-10-07. Bug introduced with f749f26eea, fixed by 93370e8e7b. * testsuite/ld-powerpc/localgot.s, * testsuite/ld-powerpc/localgot.d: New test. * testsuite/ld-powerpc/powerpc.exp: Run it.
2019-10-07Add support for new functionality in the msp430 backend of GCC.Jozef Lawrynowicz7-1/+61
This functionality will generate a new GNU object attribute for the "data region" has been added. This object attribute is used mark whether the compiler has generated code assuming that data could be in the upper or lower memory regions. Code which assumes data is always in the lower memory region is incompatible with code which uses the full memory range for data. The patch also adds a new assembler directive ".mspabi_attribute" to handle the existing MSPABI object attributes. GCC will now emit both .gnu_attribute and .mspabi_attribute directives to indicate what options the source file was compiled with. The assembler will now check the values set in these directives against the options that the it has been invoked with. If there is a discrepancy, the assembler will exit with an error. bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to.. (elf32_msp430_merge_msp430_attributes): Add support for merging the GNU object attribute for data region. binutils* readelf.c (display_msp430_gnu_attribute): New. (process_arch_specific): Use msp430 specific handler for GNU attributes. gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to FALSE if the data region is set to "upper", "either" or "none". (msp430_object_attribute): New. (md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute. (msp430_md_end): Replace hard-coded attribute values with enums. Handle data region object attribute. * doc/as.texi: Document MSP430 Data Region object attribute. * doc/c-msp430.texi: Document the .mspabi_attribute directive. * testsuite/gas/msp430/attr-430-small-bad.d: New test. * testsuite/gas/msp430/attr-430-small-bad.l: New test. * testsuite/gas/msp430/attr-430-small-good.d: New test. * testsuite/gas/msp430/attr-430-small.s: New test. * testsuite/gas/msp430/attr-430x-large-any-bad.d: New test. * testsuite/gas/msp430/attr-430x-large-any-bad.l: New test. * testsuite/gas/msp430/attr-430x-large-any-good.d: New test. * testsuite/gas/msp430/attr-430x-large-any.s: New test. * testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test. * testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test. * testsuite/gas/msp430/attr-430x-large-lower-good.d: New test. * testsuite/gas/msp430/attr-430x-large-lower.s: New test. * testsuite/gas/msp430/msp430.exp: Run new tests. include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names and values. ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test. * testsuite/ld-msp430-elf/attr-gnu-obj.s: New test. * testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test. * testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test. * testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test. * testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
2019-10-07Bogus "final link failed" messagesAlan Modra3-2/+10
This patch is a result of noticing messages like the following: tmpdir/tls32.o: in function `_start': (.text+0x1c): unresolvable R_PPC_REL24 relocation against symbol `__tls_get_addr_opt' ./ld-new: final link failed: symbol needs debug section which does not exist The "needs debug section" comes from attempting to use debug info to find source line information to print the first error message. That error isn't of interest to the user, and any previous bfd_error value which might be of interest is overwritten. So save and restore bfd_error around the fancy error reporting code. That still doesn't leave us with a clean bfd_error. Now we get ./ld-new: final link failed: nonrepresentable section on output An unresolvable relocation surely doesn't mean there is some bfd section that ld doesn't know how to output! Digging into that showed a _bfd_elf_section_from_bfd_section failure attempting to find an elf section correcsponding to ".interp". So don't go looking for elf sections on linker created bfd sections. And then fix the linker testsuite which expected the bogus message.. bfd/ * elflink.c (elf_fixup_link_order): Don't attempt to find an elf_section for linker created bfd sections. ld/ * ldmisc.c (vfinfo): Save and restore bfd_error around bfd function calls that might set it. * testsuite/ld-elf/indirect.exp: Don't expect "nonrepresentable section" message.
2019-10-07PowerPC TLS testsAlan Modra20-1/+737
This patch adds some --no-tls-optimize tests and performs some of the existing dynamic tests with tls markers in order to catch any regression in PLT counting. * testsuite/ld-powerpc/tlsexe.r: Adjust for added TLSMARK symbol. * testsuite/ld-powerpc/tlsexe32.r: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlsso32.r: Likewise. * testsuite/ld-powerpc/tls32no.d, * testsuite/ld-powerpc/tls32no.g: New test files. * testsuite/ld-powerpc/tlsexe32no.d, * testsuite/ld-powerpc/tlsexe32no.g, * testsuite/ld-powerpc/tlsexe32no.r: New test files. * testsuite/ld-powerpc/tlsexeno.d, * testsuite/ld-powerpc/tlsexeno.g, * testsuite/ld-powerpc/tlsexeno.r: New test files. * testsuite/ld-powerpc/tlsexetocno.d, * testsuite/ld-powerpc/tlsexetocno.g: New test files. * testsuite/ld-powerpc/tlsno.d, * testsuite/ld-powerpc/tlsno.g: New test files. * testsuite/ld-powerpc/tlstocno.d, * testsuite/ld-powerpc/tlstocno.g: New test files. * testsuite/ld-powerpc/powerpc.exp: Run new tests.
2019-10-07ld-arm/tls-gdesc-neg testAlan Modra2-1/+5
Fixes a failure on armeb-linuxeabi. * testsuite/ld-arm/tls-gdesc-neg.d: Relax target match.
2019-10-04PowerPC PIC vs. DLL TLS issuesAlan Modra7-21/+37
1) GOT entries generated for any of the GOT TLS relocations don't need dynamic relocations for locally defined symbols in PIEs. In the case of a tls_index doubleword, the dtpmod entry is known to be 1, and the dtprel entry is also known at link time and relative. Similarly, dtprel and tprel words are known at link time and relative. (GOT entries for other than TLS symbols are not relative and thus need dynamic relocations in PIEs.) 2) Local dynamic TLS code is really only meant for accesses local to the current binary. There was a cheapskate test for this before using the common tlsld_got slot, but the test wasn't exactly correct and might confuse anyone looking at the code. The proper test, SYMBOL_REFERENCES_LOCAL isn't so expensive that it should be avoided. 3) The same cheap test for local syms when optimising TLS sequences should be SYMBOL_REFERENCES_LOCAL too. bfd/ * elf64-ppc.c (ppc64_elf_check_relocs): Move initialisation of vars. (ppc64_elf_tls_optimize): Correct is_local condition. (allocate_got): Don't reserve dynamic relocations for any of the tls got relocs in PIEs when the symbol is local. (allocate_dynrelocs): Correct validity test for local sym using tlsld_got slot. (ppc64_elf_size_dynamic_sections): Don't reserve dynamic relocations for any of the tls got relocs in PIEs. (ppc64_elf_layout_multitoc): Likewise. (ppc64_elf_relocate_section): Correct validity test for local sym using tlsld_got slot. Don't emit dynamic relocations for any of the tls got relocs in PIEs when the symbol is local. * elf32-ppc.c (ppc_elf_tls_optimize): Correct is_local condition. (got_relocs_needed): Delete. (allocate_dynrelocs): Correct validity test for local sym using tlsld_got slot. Don't reserve dynamic relocations for any of the tls got relocs in PIEs when the symbol is local. (ppc_elf_size_dynamic_sections): Don't reserve dynamic relocations for any of the tls got relocs in PIEs. (ppc_elf_relocate_section): Correct validity test for local sym using tlsld_got slot. Don't emit dynamic relocations for any of the tls got relocs in PIEs when the symbol is local. ld/ * testsuite/ld-powerpc/tlsso.d: Adjust to suit tlsld_got usage change. * testsuite/ld-powerpc/tlsso.g: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlsso32.d: Likewise. * testsuite/ld-powerpc/tlsso32.g: Likewise. * testsuite/ld-powerpc/tlsso32.r: Likewise.
2019-10-04[PR ld/25062] arm: sign extend the addend of R_ARM_TLS_GOTDESCSzabolcs Nagy4-0/+80
On 64-bit host the 32-bit addend was loaded without sign extension into an unsigned long. bfd/ChangeLog: PR ld/25062 * elf32-arm.c (elf32_arm_final_link_relocate): Sign extend data. ld/ChangeLog: PR ld/25062 * testsuite/ld-arm/arm-elf.exp: Update. * testsuite/ld-arm/tls-gdesc-neg.d: New test. * testsuite/ld-arm/tls-gdesc-neg.s: New test.
2019-10-03libctf: installable libctf as a shared libraryNick Alcock5-8/+26
This lets other programs read and write CTF-format data. Two versioned shared libraries are created: libctf.so and libctf-nobfd.so. They contain identical content except that libctf-nobfd.so contains no references to libbfd and does not implement ctf_open, ctf_fdopen, ctf_bfdopen or ctf_bfdopen_ctfsect, so it can be used by programs that cannot use BFD, like readelf. The soname major version is presently .0 until the linker API stabilizes, when it will flip to .1 and hopefully never change again. New in v3. v4: libtoolize and turn into a pair of shared libraries. Drop --enable-install-ctf: now controlled by --enable-shared and --enable-install-libbfd, like everything else. v5: Add ../bfd to ACLOCAL_AMFLAGS and AC_CONFIG_MACRO_DIR. Fix tabdamage. * Makefile.def (host_modules): libctf is no longer no_install. * Makefile.in: Regenerated. libctf/ * configure.ac (AC_DISABLE_SHARED): New, like opcodes/. (LT_INIT): Likewise. (AM_INSTALL_LIBBFD): Likewise. (dlopen): Note why this is necessary in a comment. (SHARED_LIBADD): Initialize for possibly-PIC libiberty: derived from opcodes/. (SHARED_LDFLAGS): Likewise. (BFD_LIBADD): Likewise, for libbfd. (BFD_DEPENDENCIES): Likewise. (VERSION_FLAGS): Initialize, using a version script if ld supports one, or libtool -export-symbols-regex otherwise. (AC_CONFIG_MACRO_DIR): Add ../BFD. * Makefile.am (ACLOCAL_AMFLAGS): Likewise. (INCDIR): New. (AM_CPPFLAGS): Use $(srcdir), not $(top_srcdir). (noinst_LIBRARIES): Replace with... [INSTALL_LIBBFD] (lib_LTLIBRARIES): This, or... [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): ... this, mentioning new libctf-nobfd.la as well. [INSTALL_LIBCTF] (include_HEADERS): Add the CTF headers. [!INSTALL_LIBCTF] (include_HEADERS): New, empty. (libctf_a_SOURCES): Rename to... (libctf_nobfd_la_SOURCES): ... this, all of libctf other than ctf-open-bfd.c. (libctf_la_SOURCES): Now derived from libctf_nobfd_la_SOURCES, with ctf-open-bfd.c added. (libctf_nobfd_la_LIBADD): New, using @SHARED_LIBADD@. (libctf_la_LIBADD): New, using @BFD_LIBADD@ as well. (libctf_la_DEPENDENCIES): New, using @BFD_DEPENDENCIES@. * Makefile.am [INSTALL_LIBCTF]: Use it. * aclocal.m4: Add ../bfd/acinclude.m4, ../config/acx.m4, and the libtool macros. * libctf.ver: New, everything is version LIBCTF_1.0 currently (even the unstable components). * Makefile.in: Regenerated. * config.h.in: Likewise. * configure: Likewise. binutils/ * Makefile.am (LIBCTF): Mention the .la file. (LIBCTF_NOBFD): New. (readelf_DEPENDENCIES): Use it. (readelf_LDADD): Likewise. * Makefile.in: Regenerated. ld/ * configure.ac (TESTCTFLIB): Set to the .so or .a, like TESTBFDLIB. * Makefile.am (TESTCTFLIB): Use it. (LIBCTF): Use the .la file. (check-DEJAGNU): Use it. * Makefile.in: Regenerated. * configure: Likewise. include/ * ctf-api.h: Note the instability of the ctf_link interfaces.
2019-10-03bfd, ld: add CTF section linkingNick Alcock40-29/+591
This is quite complicated because the CTF section's contents depend on the final contents of the symtab and strtab, because it has two sections whose contents are shuffled to be in 1:1 correspondence with the symtab, and an internal strtab that gets deduplicated against the ELF strtab (with offsets adjusted to point into the ELF strtab instead). It is also compressed if large enough, so its size depends on its contents! So we cannot construct it as early as most sections: we cannot even *begin* construction until after the symtab and strtab are finalized. Thankfully there is already one section treated similarly: compressed debugging sections: the only differences are that compressed debugging sections have extra handling to deal with their changing name if compressed (CTF sections are always called ".ctf" for now, though we have reserved ".ctf.*" against future use), and that compressed debugging sections have previously-uncompressed content which has to be stashed away for later compression, while CTF sections have no content at all until we generate it (very late). BFD also cannot do the link itself: libctf knows how to do it, and BFD cannot call libctf directly because libctf already depends on bfd for file I/O. So we have to use a pair of callbacks, one, examine_strtab, which allows a caller to examine the symtab and strtab after finalization (called from elf_link_swap_symbols_out(), right before the symtabs are written, and after the strtab has been finalized), and one which actually does the emission (called emit_ctf simply because it is grouped with a bunch of section-specific late-emission function calls at the bottom of bfd_elf_final_link, and a section-specific name seems best for that). emit_ctf is actually called *twice*: once from lang_process if the emulation suggests that this bfd target does not examine the symtab or strtab, and once via a bfd callback if it does. (This means that non-ELF targets still get CTF emitted, even though the late CTF emission stage is never called for them). v2: merged with non-ELF support patch: slight commit message adjustments. v3: do not spend time merging CTF, or crash, if the CTF section is explicitly discarded. Do not try to merge or compress CTF unless linking. v4: add CTF_COMPRESSION_THRESHOLD. Annul the freed input ctf_file_t's after writeout: set SEC_IN_MEMORY on the output contents so a future bfd enhancement knows it could free it. Add SEC_LINKER_CREATED | SEC_KEEP to avoid having to add .ctf to the linker script. Drop now-unnecessary ldlang.h-level elf-bfd.h include and hackery around it. Adapt to elf32.em->elf.em and elf-generic.em->ldelf*.c changes. v5: fix tabdamage. Drop #inclusions in .h files: include in .c files, .em files, and use struct forwards instead. Use bfd_section_is_ctf inline function rather than SECTION_IS_CTF macro. Move a few comments. * Makefile.def (dependencies): all-ld depends on all-libctf. * Makefile.in: Regenerated. include/ * bfdlink.h (elf_strtab_hash): New forward. (elf_sym_strtab): Likewise. (struct bfd_link_callbacks <examine_strtab>): New. (struct bfd_link_callbacks <emit_ctf>): Likewise. bfd/ * elf-bfd.h (bfd_section_is_ctf): New inline function. * elf.c (special_sections_c): Add ".ctf". (assign_file_positions_for_non_load_sections): Note that compressed debugging sections etc are not assigned here. Treat CTF sections like SEC_ELF_COMPRESS sections when is_linker_output: sh_offset -1. (assign_file_positions_except_relocs): Likewise. (find_section_in_list): Note that debugging and CTF sections, as well as reloc sections, are assigned later. (_bfd_elf_assign_file_positions_for_non_load): CTF sections get their size and contents updated. (_bfd_elf_set_section_contents): Skip CTF sections: unlike compressed sections, they have no uncompressed content to copy at this stage. * elflink.c (elf_link_swap_symbols_out): Call the examine_strtab callback right before the strtab is written out. (bfd_elf_final_link): Don't cache the section contents of CTF sections: they are not populated yet. Call the emit_ctf callback right at the end, after all the symbols and strings are flushed out. ld/ * ldlang.h: (struct lang_input_statement_struct): Add the_ctf. (struct elf_sym_strtab): Add forward. (struct elf_strtab_hash): Likewise. (ldlang_ctf_apply_strsym): Declare. (ldlang_write_ctf_late): Likewise. * ldemul.h (ldemul_emit_ctf_early): New. (ldemul_examine_strtab_for_ctf): Likewise. (ld_emulation_xfer_type) <emit_ctf_early>: Likewise. (ld_emulation_xfer_type) <examine_strtab_for_ctf>: Likewise. * ldemul.c (ldemul_emit_ctf_early): New. (ldemul_examine_strtab_for_ctf): Likewise. * ldlang.c: Include ctf-api.h. (CTF_COMPRESSION_THRESHOLD): New. (ctf_output): New. Initialized in... (ldlang_open_ctf): ... this new function. Open all the CTF sections in the input files: mark them non-loaded and empty so as not to copy their contents to the output, but linker-created so the section gets created in the target. (ldlang_merge_ctf): New, merge types via ctf_link_add_ctf and ctf_link. (ldlang_ctf_apply_strsym): New, an examine_strtab callback: wrap ldemul_examine_strtab_for_ctf. (lang_write_ctf): New, write out the CTF section. (ldlang_write_ctf_late): New, late call via bfd's emit_ctf hook. (lang_process): Call ldlang_open_ctf, ldlang_merge_ctf, and lang_write_ctf. * ldmain.c (link_callbacks): Add ldlang_ctf_apply_strsym, ldlang_write_ctf_late. * emultempl/aix.em: Add ctf-api.h. * emultempl/armcoff.em: Likewise. * emultempl/beos.em: Likewise. * emultempl/elf.em: Likewise. * emultempl/generic.em: Likewise. * emultempl/linux.em: Likewise. * emultempl/msp430.em: Likewise. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * emultempl/ticoff.em: Likewise. * emultempl/vanilla.em: Likewise. * ldcref.c: Likewise. * ldctor.c: Likewise. * ldelf.c: Likewise. * ldelfgen.c: Likewise. * ldemul.c: Likewise. * ldexp.c: Likewise. * ldfile.c: Likewise. * ldgram.c: Likewise. * ldlex.l: Likewise. * ldmain.c: Likewise. * ldmisc.c: Likewise. * ldver.c: Likewise. * ldwrite.c: Likewise. * lexsup.c: Likewise. * mri.c: Likewise. * pe-dll.c: Likewise. * plugin.c: Likewise. * ldelfgen.c (ldelf_emit_ctf_early): New. (ldelf_examine_strtab_for_ctf): tell libctf about the symtab and strtab. (struct ctf_strsym_iter_cb_arg): New, state to do so. (ldelf_ctf_strtab_iter_cb): New: tell libctf about each string in the strtab in turn. (ldelf_ctf_symbols_iter_cb): New, tell libctf about each symbol in the symtab in turn. * ldelfgen.h (struct elf_sym_strtab): Add forward. (struct elf_strtab_hash): Likewise. (struct ctf_file): Likewise. (ldelf_emit_ctf_early): Declare. (ldelf_examine_strtab_for_ctf): Likewise. * emultempl/elf-generic.em (LDEMUL_EMIT_CTF_EARLY): Set it. (LDEMUL_EXAMINE_STRTAB_FOR_CTF): Likewise. * emultempl/aix.em (ld_${EMULATION_NAME}_emulation): Add emit_ctf_early and examine_strtab_for_ctf, NULL by default. * emultempl/armcoff.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/beos.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/elf.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/generic.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/linux.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/msp430.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/pe.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/pep.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/ticoff.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/vanilla.em (ld_vanilla_emulation): Likewise. * Makefile.am: Pull in libctf (and zlib, a transitive requirement for compressed CTF section emission). Pass it on to DejaGNU. * configure.ac: Add AM_ZLIB. * aclocal.m4: Added zlib.m4. * Makefile.in: Regenerated. * testsuite/ld-bootstrap/bootstrap.exp: Use it when relinking ld.
2019-10-02-Bsymbolic is not for PIEsAlan Modra4-72/+68
Despite PR19615, it doesn't make sense to use -Bsymbolic with PIEs. Dynamic symbols in an executable won't be overridden anyway. * ld.texi (-Bsymbolic, -Bsymbolic-functions): Don't mention PIEs. * ld.h (symbolic_enum, dynamic_list_enum), (args_type <symbolic, dynamic_list>): Move to.. * lexsup.c (parse_args): ..here, using auto vars opt_symbolic and opt_dynamic_list rather than command_line fields. Only act on -Bsymbolic and -Bsymbolic-functions for shared library output. Free dynamic_list.
2019-09-26PR24262, plugin search dir doesn't respect --libdirAlan Modra2-1/+6
bfd/ PR 24262 * Makefile.am (AM_CPPFLAGS): Add -DLIBDIR. * plugin.c (load_plugin): Search both ${libdir}/bfd-plugins and ${bindir}/../lib/bfd-plugins if different. * Makefile.in: Regenerate. ld/ PR 24262 * ld.texi (-plugin): Revert 2019-03-15 change.
2019-09-26SORT_BY_INIT_PRIORITYAlan Modra3-35/+60
I was looking at the implementation of this script keyword today and couldn't remember why we do what we do in get_init_priority, because the comments explain how the init_priority is encoded but don't say why it is necessary to extract the priority and sort on that. So after figuring out why (again), I wrote some more comments. Then I simplified get_init_priority a little, adding some sanity checking on the strtoul result. This actually makes get_init_priority support sorting by numerical suffix more generally, but I figure this feature would be better as a new keyword (without the .ctors/.dtors special case), so haven't documented the extension. * ld.texi (SORT_BY_ALIGNMENT): Reword slightly. (SORT_BY_INIT_PRIORITY): Elucidate. * ldlang.c: Include limits.h. (get_init_priority): Comment. Change param to a section, return an int. Sanity check priority digits. Support sorting more sections with trailing digits. Return -1 on error. (compare_section): Adjust.
2019-09-25Silence a build-time warning about constant comparisons when building with ↵Nick Clifton2-4/+9
clang, * emultempl/avrelf.em (_before_allocation): Silence build warning using clang.
2019-09-23ld-plugin/pr24406-1.c: Correct buffer size to readH.J. Lu2-1/+6
* testsuite/ld-plugin/pr24406-1.c (main): Correct buffer size to read.
2019-09-23elf bfd.h tidyAlan Modra7-5/+18
bfd/ * bfd-in.h (enum notice_asneeded_action): Move to bfdlink.h. Move most other elf declarations.. * elf-bfd.h: ..to here. * bfd-in2.h: Regenerate. include/ * bfdlink.h (enum notice_asneeded_action): Define. ld/ * deffilep.y: Include bfdlink.h. * ldelf.c: Likewise. * ldelfgen.c: Likewise. * ldver.c: Likewise. * mri.c: Likewise. * emultempl/irix.em: Don't include ld.h, ldmain.h, libiberty.h. Comment.
2019-09-23m68k bfd.h tidyAlan Modra2-0/+6
bfd/ * bfd-in.h: Move m68k function declaration.. * cpu-m68k.h: ..to here, new file.. * elf32-m68k.h: ..and here, new file. * elf32-m68k.c: Include cpu-m68k.h and elf32-m68k.h. * bfd-in2.h: Regenerate. ld/ * emultempl/m68kelf.em: Include elf32-m68k.h. opcodes/ * m68k-dis.c: Include cpu-m68k.h
2019-09-23bfin bfd.h tidyAlan Modra2-0/+5
bfd/ * bfd-in.h: Move bfin function declaration.. * elf32-bfin.h: ..to here, new file. * elf32-bfin.c: Include elf32-bfin.h. * bfd-in2.h: Regenerate. ld/ * emultempl/bfin.em: Include elf32-bfin.h.
2019-09-23cr16 bfd.h tidyAlan Modra2-0/+5
bfd/ * bfd-in.h: Move cr16 function declaration.. * elf32-cr16.h: ..to here, new file. * elf32-cr16.c: Include elf32-cr16.h. * bfd-in2.h: Regenerate. ld/ * emultempl/cr16elf.em: Include elf32-cr16.h.
2019-09-23xcoff bfd.h tidyAlan Modra2-0/+5
bfd/ * bfd-in.h: Move xcoff function declarations.. * xcofflink.h: ..to here, new file. * xcofflink.c: Include xcofflink.h. * coff-rs6000.c (bfd_xcoff_ar_archive_set_magic): Delete unused func. * bfd-in2.h: Regenerate. ld/ * emultempl/aix.em: Include xcofflink.h.
2019-09-23arm bfd.h tidyAlan Modra3-12/+17
bfd/ * bfd-in.h: Move arm declaraions.. * cpu-arm.h: ..to here, new file.. * coff-arm.h: ..and here, new file.. * elf32-arm.h: ..and here, new file. * cpu-arm.c: Include cpu-arm.h. * coff-arm.c: Include cpu-arm.h and coff-arm.h. * elf32-arm.c: Include cpu-arm.h and elf32-arm.h. * pe-arm.c: Move function rename defines later. * pe-arm-wince.c: Likewise and include sysdep.h and bfd.h early. * bfd-in2.h: Regenerate. gas/ * config/tc-arm.c: Include cpu-arm.h. ld/ * emultempl/armelf.em: Include elf32-arm.h. * emultempl/pe.em: Move func defines later and include coff-arm.h.
2019-09-23aarch64 bfd.h tidyAlan Modra2-0/+5
bfd/ * bfd-in.h: Move aarch64 declarations and defines.. * cpu-aarch64.h: ..to here, new file.. * elfxx-aarch64.h: ..and here. * cpu-aarch64.c: Include cpu-aarch64.h. * elfnn-aarch64.c: Likewise. * bfd-in2.h: Regenerate. ld/ * emultempl/aarch64elf.em: Include elfxx-aarch64.h.
2019-09-23ia64 bfd.h tidyAlan Modra2-0/+6
bfd/ * bfd-in.h: Move ia64 function declarations.. * elfxx-ia64.h: ..to here. * bfd-in2.h: Regenerate. ld/ * emultempl/ia64elf.em: Include elfxx-ia64.h.
2019-09-23v850 bfd.h tidyAlan Modra2-0/+5
bfd/ * bfd-in.h: Move v850 function declarations.. * elf32-v850.h: ..to here, new file. * elf32-v850.c: Include elf32-v850.h. * bfd-in2.h: Regenerate. ld/ * emultempl/v850elf.em: Include elf32-v850.h.
2019-09-23csky bfd.h tidyAlan Modra2-0/+5
bfd/ * bfd-in.h: Move csky function declarations to.. * elf32-csky.h: ..here, new file. * elf32-csky.c: Include elf32-csky.h. * bfd-in2.h: Regenerate. ld/ * emultempl/cskyelf.em: Include elf32-csky.h.
2019-09-22Work around gcc10 FAIL: S-records with constructorsAlan Modra2-1/+5
gcc10 on x86_64 and powerpc64le recognises that the loop in Foo::operator= can be turned into a call to memmove, which then results in an undefined symbol when linking. Avoid that by making the loop smaller. * testsuite/ld-srec/sr3.cc (FOO_MSG_LEN): Set to 4.
2019-09-20RISC-V: Optimize lui and auipc relaxations for undefweak symbol.Jim Wilson5-24/+39
For the lui and auipc relaxations, since the symbol value of an undefined weak symbol is always be zero, we can optimize the patterns into a single LI/MV/ADDI instruction. bfd/ * elfnn-riscv.c (riscv_pcgp_hi_reloc): Add new field undefined_weak. (riscv_record_pcgp_hi_reloc): New parameter undefined_weak. Set undefined_weak field from it. (relax_func_t): New parameter undefined_weak. (_bfd_riscv_relax_call): New ignored parameter undefined_weak. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_delete): Likewise. (_bfd_riscv_relax_lui): New parameter undefined_weak. If true, allow relaxing. For LO12* relocs, set rs1 to x0 when undefined_weak. (_bfd_riscv_relax_pc): New parameter undefined_weak. For LO12* relocs, set undefined_weak from hi_reloc. If true, allow relaxing. For LO12* relocs, set rs1 to x0 when undefined_weak and change to non-pcrel reloc. (_bfd_riscv_relax_section): New local undefined_weak. Set for undef weak relocs that can be relaxed. Pass to relax_func call. ld/ * testsuite/ld-riscv-elf/weakref32.s: Add relaxable undef weak code. * testsuite/ld-riscv-elf/weakref64.s: Likewise. * testsuite/ld-riscv-elf/weakref32.d: Updated. * testsuite/ld-riscv-elf/weakref64.d: Updated.
2019-09-20bfd macro conversion to inline functions, sectionAlan Modra4-12/+23
This one exposed a bug in tic6x gas, found with inline function parameter type checking. struct bfd_section and struct bfd_symbol both have a flags field, so bfd_is_com_section (symbol) compiled OK when bfd_is_com_section was a macro but didn't special case common symbols. bfd/ * bfd-in.h (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment, bfd_section_flags), (bfd_section_userdata, bfd_is_com_section, discarded_section), (bfd_get_section_limit_octets, bfd_get_section_limit): Delete macros. * bfd.c (bfd_get_section_limit_octets, bfd_get_section_limit), (bfd_section_list_remove, bfd_section_list_append), (bfd_section_list_prepend, bfd_section_list_insert_after), (bfd_section_list_insert_before, bfd_section_removed_from_list): New inline functions. * section.c (bfd_is_und_section, bfd_is_abs_section), (bfd_is_ind_section, bfd_is_const_section, bfd_section_list_remove), (bfd_section_list_append, bfd_section_list_prepend), (bfd_section_list_insert_after, bfd_section_list_insert_before), (bfd_section_removed_from_list): Delete macros. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment, bfd_section_flags), (bfd_section_userdata, bfd_is_com_section, bfd_is_und_section), (bfd_is_abs_section, bfd_is_ind_section, bfd_is_const_section), (discarded_section): New inline functions. * bfd-in2.h: Regenerate. gas/ * config/tc-tic6x.c (tc_gen_reloc): Correct common symbol check. ld/ * emultempl/xtensaelf.em (xtensa_get_section_deps): Comment. Use bfd_section_userdata. (xtensa_set_section_deps): Use bfd_set_section_userdata. * ldlang.c (lang_output_section_get): Use bfd_section_userdata. (sort_def_symbol): Likewise, and bfd_set_section_userdata. (init_os): Use bfd_set_section_userdata. (print_all_symbols): Use bfd_section_userdata. * ldlang.h (get_userdata): Delete.
2019-09-20bfd macro conversion to inline functionsAlan Modra10-26/+33
This converts some of the macros that access struct bfd fields to inline functions. bfd/ * archive.c (bfd_generic_archive_p): Use bfd_set_thin_archive. * bfd-in.h (bfd_get_filename, bfd_get_cacheable, bfd_get_format), (bfd_get_target, bfd_get_flavour, bfd_family_coff, bfd_big_endian), (bfd_little_endian, bfd_header_big_endian, bfd_header_little_endian), (bfd_get_file_flags, bfd_applicable_file_flags), (bfd_applicable_section_flags, bfd_has_map, bfd_is_thin_archive), (bfd_valid_reloc_types, bfd_usrdata, bfd_get_start_address), (bfd_get_symcount, bfd_get_outsymbols, bfd_count_sections), (bfd_get_dynamic_symcount, bfd_get_symbol_leading_char): Delete. * bfd/bfd.c (bfd_get_filename, bfd_get_cacheable, bfd_get_format), (bfd_get_file_flags, bfd_get_start_address, bfd_get_symcount), (bfd_get_dynamic_symcount, bfd_get_outsymbols, bfd_count_sections), (bfd_has_map, bfd_is_thin_archive, bfd_set_thin_archive), (bfd_usrdata, bfd_set_usrdata): New inline functions. * targets.c (bfd_get_target, bfd_get_flavour), (bfd_applicable_file_flags, bfd_family_coff, bfd_big_endian), (bfd_little_endian, bfd_header_big_endian), (bfd_header_little_endian, bfd_applicable_section_flags), (bfd_get_symbol_leading_char): New inline functions. * bfd-in2.h: Regenerate. binutils/ * ar.c (write_archive): Use bfd_set_thin_archive. gdb/ * gdb_bfd.c (gdb_bfd_ref, gdb_bfd_unref): Use bfd_set_usrdata. * dwarf2read.c (dwarf2_read_gdb_index, dwarf2_read_debug_names), (read_indirect_string_from_dwz): Use bfd accessor. * dwarf2read.h (struct dwz_file <filename>): Likewise. * machoread.c (macho_symfile_read_all_oso): Likewise. * solib.c (solib_bfd_open): Likewise. ld/ * ldelf.c (ldelf_after_open, ldelf_place_orphan * ldlang.c (walk_wild_file, lang_process): Use bfd_usrdata. (load_symbols, ldlang_add_file): Use bfd_set_usrdata. * ldmain.c (add_archive_element): Use bfd_usrdata. * ldlang.h (bfd_input_just_syms): New inline function. * emultempl/aarch64elf.em (build_section_lists): Use it. * emultempl/mmo.em (mmo_place_orphan): Likewise. * emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Likewise. * emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise. * emultempl/ppc64elf.em (build_section_lists): Likewise. sim/ * ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code.
2019-09-19bfd_section_* macrosAlan Modra23-136/+129
This large patch removes the unnecessary bfd parameter from various bfd section macros and functions. The bfd is hardly ever used and if needed for the bfd_set_section_* or bfd_rename_section functions can be found via section->owner except for the com, und, abs, and ind std_section special sections. Those sections shouldn't be modified anyway. The patch also removes various bfd_get_section_<field> macros, replacing their use with bfd_section_<field>, and adds bfd_set_section_lma. I've also fixed a minor bug in gas where compressed section renaming was done directly rather than calling bfd_rename_section. This would have broken bfd_get_section_by_name and similar functions, but that hardly mattered at such a late stage in gas processing. bfd/ * bfd-in.h (bfd_get_section_name, bfd_get_section_vma), (bfd_get_section_lma, bfd_get_section_alignment), (bfd_get_section_size, bfd_get_section_flags), (bfd_get_section_userdata): Delete. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment): Lose bfd parameter. (bfd_section_flags, bfd_section_userdata): New. (bfd_is_com_section): Rename parameter. * section.c (bfd_set_section_userdata, bfd_set_section_vma), (bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section), (bfd_set_section_size): Delete bfd parameter, rename section parameter. (bfd_set_section_lma): New. * bfd-in2.h: Regenerate. * mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param, update callers. * aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h, * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c, * elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c, * mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c, * peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c, * xcofflink.c: Update throughout for bfd section macro and function changes. binutils/ * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c, * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c, * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c, * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update throughout for bfd section macro and function changes. gas/ * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c, * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c, * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c, * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c, * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c, * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c, * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c, * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c, * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for bfd section macro and function changes. * write.c (compress_debug): Use bfd_rename_section. gdb/ * aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c, * coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c, * dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c, * exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h, * hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c, * i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c, * maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c, * mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c, * objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c, * ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c, * rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c, * s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c, * solib-spu.c, * solib-svr4.c, * solib-target.c, * spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c, * symmisc.c, * symtab.c, * target.c, * windows-nat.c, * xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c, * mi/mi-interp.c: Update throughout for bfd section macro and function changes. * gcore (gcore_create_callback): Use bfd_set_section_lma. * spu-tdep.c (spu_overlay_new_objfile): Likewise. gprof/ * corefile.c, * symtab.c: Update throughout for bfd section macro and function changes. ld/ * ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/cr16elf.em, * emultempl/cskyelf.em, * emultempl/m68hc1xelf.em, * emultempl/m68kelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update throughout for bfd section macro and function changes. libctf/ * ctf-open-bfd.c: Update throughout for bfd section macro changes. opcodes/ * arc-ext.c: Update throughout for bfd section macro changes. sim/ * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c, * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c, * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c, * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c, * rx/trace.c: Update throughout for bfd section macro changes.
2019-09-18bfd_asymbol_* macrosAlan Modra2-3/+8
The main point of this patch is to give bfd_get_section a better name, bfd_asymbol_section. bfd/ * bfd-in.h (bfd_asymbol_section): Rename from bfd_get_section. (bfd_get_output_section): Delete. (bfd_asymbol_base): Delete. (bfd_asymbol_section, bfd_asymbol_value, bfd_asymbol_name), (bfd_asymbol_bfd, bfd_asymbol_flavour): Tidy. (bfd_set_asymbol_name): New macro. * bfd-in2.h: Regenerate. * aout-cris.c: Update throughout to use bfd_asymbol_section. * aoutx.h: Likewise. * cofflink.c: Likewise. * dwarf2.c: Likewise. * ecoff.c: Likewise. * elf.c: Likewise. * elf32-arm.c: Likewise. * elf32-mips.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elfn32-mips.c: Likewise. * elfnn-aarch64.c: Likewise. * elfxx-mips.c: Likewise. * linker.c: Likewise. * pdp11.c: Likewise. * elf64-mmix.c (mmix_elf_reloc): Expand bfd_get_output_section. binutils/ * nm.c: Update bfd_get_section to bfd_asymbol_section throughout. * objcopy.c: Likewise. * objdump.c: Likewise. * rdcoff.c: Likewise. * objcopy.c (create_new_symbol): Use bfd_set_asymbol_name. (filter_symbols): Likewise. gas/ * symbols.c (S_IS_LOCAL): Update bfd_get_section to bfd_asymbol_section. gdb/ * arm-tdep.c (arm_record_special_symbol): Update bfd_get_section to bfd_asymbol_section. ld/ * ldcref.c (check_reloc_refs): Update bfd_get_section to bfd_asymbol_section.
2019-09-18Re-generate many configure and Makefile.in filesSimon Marchi3-23/+13
I get some spurious changes when running autoconf/automake for various projects in the tree. This is likely because they were generated using distro-patched tools last time. I ran `autoreconf -f` in the various automake projects of the binutils-gdb tree, and this is the result. The tools I am using have been compiled from source, from the upstream release. bfd/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gas/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gold/ChangeLog: * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. ld/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. opcodes/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate.
2019-09-18Constify target name, reloc name, and carsym nameAlan Modra2-5/+10
bfd/ * bfd-in.h (carsym.name): Make const. * reloc.c (struct reloc_howto_struct.name): Likewise. * targets.c (bfd_target.name): Likewise.! * bfd.c (bfd_get_sign_extend_vma): Make variable const. * som.c (som_bfd_fill_in_ar_symbols): Use an intermediary variable when setting carsym.name. * bfd-in2.h: Regenerate. gdb/ * amd64-dicos-tdep.c (amd64_dicos_osabi_sniffer): Constify target. * i386-cygwin-tdep.c (i386_cygwin_init_abi): Likewise. * i386-dicos-tdep.c (i386_dicos_osabi_sniffer): Likewise. ld/ * ldlang.c (stricpy, strcut, name_compare): Constify params. (get_first_input_target): Make return and "target" const.
2019-09-18Use bfd_set_filename moreAlan Modra3-4/+9
Fixes a few leaks in bfd and ld. bfd/ * mach-o.c (bfd_mach_o_fat_member_init): Likewise. Replace xstrdup and xmalloc with bfd_strdup and bfd_malloc. Return an error status. Adjust calls. * vms-lib.c (_bfd_vms_lib_get_module): Test mhd->id earlier. Close bfd on failure. Replace xstrdup/bfd_alloc use with bfd_malloc. Use bfd_set_filename. gdb/ * solib-spu.c (spu_bfd_open): Use bfd_set_filename. * spu-linux-nat.c (spu_bfd_open): Likewise. ld/ * emultempl/pe.em (after_open): Use bfd_set_filename. * emultempl/pep.em (after_open): Use bfd_set_filename.
generated by cgit v1.1 at 2024-11-19 23:39:50 +0000