|
Looking at the ARM disassembler output, every comment seems to start
with a ';' character, so I assumed this was the correct character to
start an assembler comment.
I then spotted a couple of places where there was no ';', but instead,
just a '@' character. I thought that this was a case of a missing
';', and proposed a patch to add the missing ';' characters.
Turns out I was wrong, '@' is actually the ARM assembler comment
character, while ';' is the statement separator. Thus this:
nop ;@ comment
is two statements, the first is the 'nop' instruction, while the
second contains no instructions, just the '@ comment' comment text.
This:
nop @ comment
is a single 'nop' instruction followed by a comment. And finally,
this:
nop ; comment
is two statements, the first contains the 'nop' instruction, while the
second contains the instruction 'comment', which obviously isn't
actually an instruction at all.
Why this matters is that, in the next commit, I would like to add
libopcodes syntax styling support for ARM.
The question then is how should the disassembler style the three cases
above?
As '@' is the actual comment start character then clearly the '@' and
anything after it can be styled as a comment. But what about ';' in
the second example? Style as text? Style as a comment?
And the third example is even harder, what about the 'comment' text?
Style as an instruction mnemonic? Style as text? Style as a comment?
I think the only sensible answer is to move the disassembler to use
'@' consistently as its comment character, and remove all the uses of
';'.
Then, in the next commit, it's obvious what to do.
There's obviously a *lot* of tests that get updated by this commit,
the only actual code changes are in opcodes/arm-dis.c.
|
|
when disassembling, and it will use dynamic relocs to interpret entries in the PLT and GOT.
binutils * objdump.c (is_significant_symbol_name): New function.
(remove_useless_symbols): Do not remove significanr symbols.
(find_symbol_for_address): If an exact match for the specified
address has not been found, try scanning the dynamic relocs to see
if one of these matches the address. If so, use the symbol
associated with the reloc.
(objdump_print_addr_with_symbol): Do not print offsets to symbols
with no value.
(disassemble_section): Only use dynamic relocs if the user
requested this.
(disassemble_data): Always load dynamic relocs if they are
available.
ld * ld-aarch64/emit-relocs-515-be.d: Adjust output to match change
in objdump.
* ld-aarch64/emit-relocs-515.d: Likewise.
* ld-aarch64/emit-relocs-516-be.d: Likewise.
* ld-aarch64/emit-relocs-516.d: Likewise.
* ld-aarch64/farcall-b-plt.d: Likewise.
* ld-aarch64/farcall-bl-plt.d: Likewise.
* ld-aarch64/gc-plt-relocs.d: Likewise.
* ld-aarch64/tls-desc-ie.d: Likewise.
* ld-aarch64/tls-tiny-desc.d: Likewise.
* ld-aarch64/tls-tiny-gd.d: Likewise.
* ld-aarch64/tls-tiny-ie.d: Likewise.
* ld-arm/arm-app-abs32.d: Likewise.
* ld-arm/arm-app.d: Likewise.
* ld-arm/arm-lib-plt32.d: Likewise.
* ld-arm/arm-lib.d: Likewise.
* ld-arm/armthumb-lib.d: Likewise.
* ld-arm/cortex-a8-fix-b-plt.d: Likewise.
* ld-arm/cortex-a8-fix-bcc-plt.d: Likewise.
* ld-arm/cortex-a8-fix-bl-plt.d: Likewise.
* ld-arm/cortex-a8-fix-bl-rel-plt.d: Likewise.
* ld-arm/cortex-a8-fix-blx-plt.d: Likewise.
* ld-arm/farcall-mixed-app-v5.d: Likewise.
* ld-arm/farcall-mixed-app.d: Likewise.
* ld-arm/farcall-mixed-app2.d: Likewise.
* ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* ld-arm/farcall-mixed-lib.d: Likewise.
* ld-arm/ifunc-10.dd: Likewise.
* ld-arm/ifunc-14.dd: Likewise.
* ld-arm/ifunc-15.dd: Likewise.
* ld-arm/ifunc-3.dd: Likewise.
* ld-arm/ifunc-4.dd: Likewise.
* ld-arm/ifunc-9.dd: Likewise.
* ld-arm/long-plt-format.d: Likewise.
* ld-arm/mixed-app-v5.d: Likewise.
* ld-arm/mixed-app.d: Likewise.
* ld-arm/mixed-lib.d: Likewise.
* ld-arm/tls-lib-loc.d: Likewise.
* ld-cris/dso-pltdis1.d: Likewise.
* ld-cris/dso-pltdis2.d: Likewise.
* ld-cris/dso12-pltdis.d: Likewise.
* ld-elf/symbolic-func.r: Likewise.
* ld-frv/fdpic-pie-1.d: Likewise.
* ld-frv/fdpic-pie-2.d: Likewise.
* ld-frv/fdpic-pie-6.d: Likewise.
* ld-frv/fdpic-pie-7.d: Likewise.
* ld-frv/fdpic-pie-8.d: Likewise.
* ld-frv/fdpic-shared-1.d: Likewise.
* ld-frv/fdpic-shared-2.d: Likewise.
* ld-frv/fdpic-shared-3.d: Likewise.
* ld-frv/fdpic-shared-4.d: Likewise.
* ld-frv/fdpic-shared-5.d: Likewise.
* ld-frv/fdpic-shared-6.d: Likewise.
* ld-frv/fdpic-shared-7.d: Likewise.
* ld-frv/fdpic-shared-8.d: Likewise.
* ld-frv/fdpic-shared-local-2.d: Likewise.
* ld-frv/fdpic-shared-local-8.d: Likewise.
* ld-frv/fdpic-static-1.d: Likewise.
* ld-frv/fdpic-static-2.d: Likewise.
* ld-frv/fdpic-static-6.d: Likewise.
* ld-frv/fdpic-static-7.d: Likewise.
* ld-frv/fdpic-static-8.d: Likewise.
* ld-frv/tls-dynamic-2.d: Likewise.
* ld-frv/tls-initial-shared-2.d: Likewise.
* ld-frv/tls-relax-shared-2.d: Likewise.
* ld-frv/tls-shared-2.d: Likewise.
* ld-i386/plt-nacl.pd: Likewise.
* ld-i386/plt-pic-nacl.pd: Likewise.
* ld-i386/plt-pic.pd: Likewise.
* ld-i386/plt.pd: Likewise.
* ld-i386/pr19636-1d-nacl.d: Likewise.
* ld-i386/pr19636-1d.d: Likewise.
* ld-i386/pr19636-2c-nacl.d: Likewise.
* ld-i386/pr19636-2c.d: Likewise.
* ld-ifunc/ifunc-21-x86-64.d: Likewise.
* ld-ifunc/ifunc-22-x86-64.d: Likewise.
* ld-ifunc/pr17154-i386.d: Likewise.
* ld-ifunc/pr17154-x86-64.d: Likewise.
* ld-m68k/plt1-68020.d: Likewise.
* ld-m68k/plt1-cpu32.d: Likewise.
* ld-m68k/plt1-isab.d: Likewise.
* ld-m68k/plt1-isac.d: Likewise.
* ld-metag/shared.d: Likewise.
* ld-metag/stub_pic_app.d: Likewise.
* ld-metag/stub_pic_shared.d: Likewise.
* ld-metag/stub_shared.d: Likewise.
* ld-s390/tlsbin_64.dd: Likewise.
* ld-s390/tlspic_64.dd: Likewise.
* ld-tic6x/shlib-1.dd: Likewise.
* ld-tic6x/shlib-1b.dd: Likewise.
* ld-tic6x/shlib-1rb.dd: Likewise.
* ld-tic6x/shlib-app-1.dd: Likewise.
* ld-tic6x/shlib-app-1b.dd: Likewise.
* ld-tic6x/shlib-app-1r.dd: Likewise.
* ld-tic6x/shlib-app-1rb.dd: Likewise.
* ld-tic6x/shlib-noindex.dd: Likewise.
* ld-vax-elf/export-class-data.dd: Likewise.
* ld-vax-elf/plt-local-lib.dd: Likewise.
* ld-vax-elf/plt-local.dd: Likewise.
* ld-x86-64/bnd-ifunc-2.d: Likewise.
* ld-x86-64/bnd-plt-1.d: Likewise.
* ld-x86-64/gotpcrel1.dd: Likewise.
* ld-x86-64/libno-plt-1b.dd: Likewise.
* ld-x86-64/load1c-nacl.d: Likewise.
* ld-x86-64/load1c.d: Likewise.
* ld-x86-64/load1d-nacl.d: Likewise.
* ld-x86-64/load1d.d: Likewise.
* ld-x86-64/mov1a.d: Likewise.
* ld-x86-64/mov1b.d: Likewise.
* ld-x86-64/mov1c.d: Likewise.
* ld-x86-64/mov1d.d: Likewise.
* ld-x86-64/mov2a.d: Likewise.
* ld-x86-64/mov2b.d: Likewise.
* ld-x86-64/mov2c.d: Likewise.
* ld-x86-64/mov2d.d: Likewise.
* ld-x86-64/mpx3.dd: Likewise.
* ld-x86-64/mpx4.dd: Likewise.
* ld-x86-64/no-plt-1a.dd: Likewise.
* ld-x86-64/no-plt-1b.dd: Likewise.
* ld-x86-64/no-plt-1c.dd: Likewise.
* ld-x86-64/no-plt-1e.dd: Likewise.
* ld-x86-64/no-plt-1f.dd: Likewise.
* ld-x86-64/no-plt-1g.dd: Likewise.
* ld-x86-64/plt-main-bnd.dd: Likewise.
* ld-x86-64/plt-nacl.pd: Likewise.
* ld-x86-64/plt.pd: Likewise.
* ld-x86-64/pr18591.d: Likewise.
* ld-x86-64/pr19609-1c.d: Likewise.
* ld-x86-64/pr19609-1e.d: Likewise.
* ld-x86-64/pr19609-1j.d: Likewise.
* ld-x86-64/pr19609-1l.d: Likewise.
* ld-x86-64/pr19609-1m.d: Likewise.
* ld-x86-64/pr19609-5b.d: Likewise.
* ld-x86-64/pr19609-5c.d: Likewise.
* ld-x86-64/pr19609-5e.d: Likewise.
* ld-x86-64/pr19609-6b.d: Likewise.
* ld-x86-64/pr19609-7b.d: Likewise.
* ld-x86-64/pr19609-7d.d: Likewise.
* ld-x86-64/pr19636-2d.d: Likewise.
* ld-x86-64/pr20093-1.d: Likewise.
* ld-x86-64/pr20093-2.d: Likewise.
* ld-x86-64/pr20253-1b.d: Likewise.
* ld-x86-64/pr20253-1d.d: Likewise.
* ld-x86-64/pr20253-1f.d: Likewise.
* ld-x86-64/pr20253-1h.d: Likewise.
* ld-x86-64/pr20253-1j.d: Likewise.
* ld-x86-64/pr20253-1l.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin2.dd: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsdesc-nacl.pd: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.pd: Likewise.
* ld-x86-64/tlsgd10.dd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgd8.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic2.dd: Likewise.
2016-10-11 Nick Clifton <nickc@redhat.com>
PR ld/20535
* emultempl/elf32.em (_search_needed): Add support for pseudo
environment variables supported by ld.so. Namely $ORIGIN, $LIB
and $PLATFORM.
* configure.ac: Add getauxval to list AC_CHECK_FUNCS list.
* config.in: Regenerate.
* configure: Regenerate.
2016-10-11 Alan Modra <amodra@gmail.com>
* ldlang.c (lang_do_assignments_1): Descend into output section
statements that do not yet have bfd sections. Set symbol section
temporarily for symbols defined in such statements to the undefined
section. Don't error on data or reloc statements until final phase.
* ldexp.c (exp_fold_tree_1 <etree_assign>): Handle bfd_und_section
in expld.section.
* testsuite/ld-mmix/bpo-10.d: Adjust.
* testsuite/ld-mmix/bpo-11.d: Adjust.
2016-10-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* emulparams/elf64_s390.sh: Move binary start to 16M.
* testsuite/ld-s390/tlsbin_64.dd: Adjust testcases accordingly.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
2016-10-07 Alan Modra <amodra@gmail.com>
* ldexp.c (MAX): Define.
(exp_unop, exp_binop, exp_trinop): Alloc at least enough for
etree_type.value.
2016-10-07 Alan Modra <amodra@gmail.com>
* testsuite/lib/ld-lib.exp (is_generic_elf): New, extracted from..
* testsuite/ld-elf/elf.exp: ..here.
2016-10-06 Ludovic Court?s <ludo@gnu.org>
* emulparams/elf32bmipn32-defs.sh: Shift quote of
"x$EMULATION_NAME" to the left to work around
<http://ftp.gnu.org/gnu/bash/bash-4.2-patches/bash42-007>.
2016-10-06 Alan Modra <amodra@gmail.com>
* lexsup.c: Spell fall through comments consistently and add
missing fall through comments.
2016-10-06 Alan Modra <amodra@gmail.com>
* plugin.c (asymbol_from_plugin_symbol): Avoid compiler warning
by adding return.
2016-10-04 Alan Modra <amodra@gmail.com>
* ld.texinfo (Expression Section): Update result of arithmetic
expressions.
* ldexp.c (arith_result_section): New function.
(fold_binary): Use it.
2016-10-04 Alan Modra <amodra@gmail.com>
* ldexp.c (exp_value_fold): New function.
(exp_unop, exp_binop, exp_trinop): Use it.
2016-09-30 Alan Modra <amodra@gmail.com>
* scripttempl/v850.sc: Don't reference __ctbp, __ep, __gp when
not relocating.
* scripttempl/v850_rh850.sc: Likewise.
2016-09-30 Alan Modra <amodra@gmail.com>
PR ld/20528
* testsuite/ld-elf/pr20528a.d: xfail generic elf targets. Allow
multiple .text sections for hppa-linux.
* testsuite/ld-elf/pr20528b.d: Likewise.
2016-09-30 Alan Modra <amodra@gmail.com>
* ldmain.c (default_bfd_error_handler): New function pointer.
(ld_bfd_error_handler): New function.
(main): Arrange to call it on bfd errors/warnings.
(ld_bfd_assert_handler): Enable tail call.
2016-09-30 Alan Modra <amodra@gmail.com>
* ldlang.c (ignore_bfd_errors): Update params.
2016-09-29 H.J. Lu <hongjiu.lu@intel.com>
PR ld/20528
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Don't
merge 2 sections with different SHF_EXCLUDE.
* testsuite/ld-elf/pr20528a.d: New file.
* testsuite/ld-elf/pr20528a.s: Likewise.
* testsuite/ld-elf/pr20528b.d: Likewise.
* testsuite/ld-elf/pr20528b.s: Likewise.
2016-09-28 Christophe Lyon <christophe.lyon@linaro.org>
PR ld/20608
* testsuite/ld-arm/arm-elf.exp: Handle new testcase.
* testsuite/ld-arm/farcall-mixed-app2.d: New file.
* testsuite/ld-arm/farcall-mixed-app2.r: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.s: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.sym: Likewise.
2016-09-26 Vlad Zakharov <vzakhar@synopsys.com>
* Makefile.in: Regenerate.
* configure: Likewise.
2016-09-26 Alan Modra <amodra@gmail.com>
* testsuite/ld-powerpc/attr-gnu-4-4.s: Delete.
* testsuite/ld-powerpc/attr-gnu-4-14.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-24.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-34.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-41.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output.
* testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests.
2016-09-23 Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
PR ld/20595
* testsuite/ld-arm/unwind-4.d: Add -q option to linker command
line and -r option to objdump command line. Match emitted relocs
to make sure that superflous relocs are not generated.
2016-09-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* emulparams/elf64_s390.sh: Change TEXT_START_ADDR to 256MB.
* testsuite/ld-s390/tlsbin_64.dd: Adjust testcase accordingly.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
2016-09-22 Nick Clifton <nickc@redhat.com>
* emultempl/elf32.em (_try_needed): In verbose mode, report failed
attempts to find a needed library.
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
* testsuite/ld-aarch64/emit-relocs-28.d: Expect spaces after ","
in addresses.
* testsuite/ld-aarch64/emit-relocs-301-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-301.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-302-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-302.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-310-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-310.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-313.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-515-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-515.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-516-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-516.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-531.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-532.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-533.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-534.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-535.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-536.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-537.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-538.d: Likewise.
* testsuite/ld-aarch64/erratum835769.d: Likewise.
* testsuite/ld-aarch64/erratum843419.d: Likewise.
* testsuite/ld-aarch64/farcall-b-plt.d: Likewise.
* testsuite/ld-aarch64/farcall-bl-plt.d: Likewise.
* testsuite/ld-aarch64/gc-plt-relocs.d: Likewise.
* testsuite/ld-aarch64/ifunc-21.d: Likewise.
* testsuite/ld-aarch64/ifunc-7c.d: Likewise.
* testsuite/ld-aarch64/tls-desc-ie.d: Likewise.
* testsuite/ld-aarch64/tls-large-desc-be.d: Likewise.
* testsuite/ld-aarch64/tls-large-desc.d: Likewise.
* testsuite/ld-aarch64/tls-large-ie-be.d: Likewise.
* testsuite/ld-aarch64/tls-large-ie.d: Likewise.
* testsuite/ld-aarch64/tls-relax-all.d: Likewise.
* testsuite/ld-aarch64/tls-relax-gd-ie.d: Likewise.
* testsuite/ld-aarch64/tls-relax-gdesc-ie-2.d: Likewise.
* testsuite/ld-aarch64/tls-relax-gdesc-ie.d: Likewise.
* testsuite/ld-aarch64/tls-relax-large-desc-ie-be.d: Likewise.
* testsuite/ld-aarch64/tls-relax-large-desc-ie.d: Likewise.
* testsuite/ld-aarch64/tls-tiny-desc.d: Likewise.
* testsuite/ld-aarch64/tls-tiny-gd.d: Likewise.
gas * gas/arm/tls.d: Adjust output to match change in objdump.
|
|
* arm.h (R_ARM_IRELATIVE): New relocation.
bfd/
* reloc.c (BFD_RELOC_ARM_IRELATIVE): New relocation.
* bfd-in2.h: Regenerate.
* elf32-arm.c (elf32_arm_howto_table_2): Rename existing definition
to elf32_arm_howto_table_3 and replace with a single R_ARM_IRELATIVE
entry.
(elf32_arm_howto_from_type): Update accordingly.
(elf32_arm_reloc_map): Map BFD_RELOC_ARM_IRELATIVE to R_ARM_IRELATIVE.
(elf32_arm_reloc_name_lookup): Handle elf32_arm_howto_table_3.
(arm_plt_info): New structure, split out from elf32_arm_link_hash_entry
with an extra noncall_refcount field.
(arm_local_iplt_info): New structure.
(elf_arm_obj_tdata): Add local_iplt.
(elf32_arm_local_iplt): New accessor macro.
(elf32_arm_link_hash_entry): Replace plt_thumb_refcount,
plt_maybe_thumb_refcount and plt_got_offset with an arm_plt_info.
Change tls_type to a bitfield and add is_iplt.
(elf32_arm_link_hash_newfunc): Update accordingly.
(elf32_arm_allocate_local_sym_info): New function.
(elf32_arm_create_local_iplt): Likewise.
(elf32_arm_get_plt_info): Likewise.
(elf32_arm_plt_needs_thumb_stub_p): Likewise.
(elf32_arm_get_local_dynreloc_list): Likewise.
(create_ifunc_sections): Likewise.
(elf32_arm_copy_indirect_symbol): Update after the changes to
elf32_arm_link_hash_entry. Assert the is_iplt has not yet been set.
(arm_type_of_stub): Add an st_type argument. Use elf32_arm_get_plt_info
to get PLT information. Assert that all STT_GNU_IFUNC references
are turned into PLT references.
(arm_build_one_stub): Pass the symbol type to
elf32_arm_final_link_relocate.
(elf32_arm_size_stubs): Pass the symbol type to arm_type_of_stub.
(elf32_arm_allocate_irelocs): New function.
(elf32_arm_add_dynreloc): In static objects, use .rel.iplt for
all R_ARM_IRELATIVE.
(elf32_arm_allocate_plt_entry): New function.
(elf32_arm_populate_plt_entry): Likewise.
(elf32_arm_final_link_relocate): Add an st_type parameter.
Set srelgot to null for static objects. Use separate variables
to record which st_value and st_type should be used when generating
a dynamic relocation. Use elf32_arm_get_plt_info to find the
symbol's PLT information, setting has_iplt_entry, splt,
plt_offset and gotplt_offset accordingly. Check whether
STT_GNU_IFUNC symbols should resolve to an .iplt entry, and change
the relocation target accordingly. Broaden assert to include
.iplts. Don't set sreloc for static relocations. Assert that
we only generate dynamic R_ARM_RELATIVE relocations for R_ARM_ABS32
and R_ARM_ABS32_NOI. Generate R_ARM_IRELATIVE relocations instead
of R_ARM_RELATIVE relocations if the target is an STT_GNU_IFUNC
symbol. Pass the symbol type to arm_type_of_stub. Conditionally
resolve GOT references to the .igot.plt entry.
(elf32_arm_relocate_section): Update the call to
elf32_arm_final_link_relocate.
(elf32_arm_gc_sweep_hook): Use elf32_arm_get_plt_info to get PLT
information. Treat R_ARM_REL32 and R_ARM_REL32_NOI as call
relocations in shared libraries and relocatable executables.
Count non-call PLT references. Use elf32_arm_get_local_dynreloc_list
to get the list of dynamic relocations for a local symbol.
(elf32_arm_check_relocs): Always create ifunc sections. Set isym
at the same time as setting h. Use elf32_arm_allocate_local_sym_info
to allocate local symbol information. Treat R_ARM_REL32 and
R_ARM_REL32_NOI as call relocations in shared libraries and
relocatable executables. Record PLT information for local
STT_GNU_IFUNC functions as well as global functions. Count
non-call PLT references. Use elf32_arm_get_local_dynreloc_list
to get the list of dynamic relocations for a local symbol.
(elf32_arm_adjust_dynamic_symbol): Handle STT_GNU_IFUNC symbols.
Don't remove STT_GNU_IFUNC PLTs unless all references have been
removed. Update after the changes to elf32_arm_link_hash_entry.
(allocate_dynrelocs_for_symbol): Decide whether STT_GNU_IFUNC PLT
entries should live in .plt or .iplt. Check whether the .igot.plt
and .got entries can be combined. Use elf32_arm_allocate_plt_entry
to allocate .plt and .(i)got.plt entries. Detect which .got
entries will need R_ARM_IRELATIVE relocations and use
elf32_arm_allocate_irelocs to allocate them. Likewise other
non-.got dynamic relocations.
(elf32_arm_size_dynamic_sections): Allocate .iplt, .igot.plt
and dynamic relocations for local STT_GNU_IFUNC symbols.
Check whether the .igot.plt and .got entries can be combined.
Detect which .got entries will need R_ARM_IRELATIVE relocations
and use elf32_arm_allocate_irelocs to allocate them. Use stashed
section pointers intead of strcmp checks. Handle iplt and igotplt.
(elf32_arm_finish_dynamic_symbol): Use elf32_arm_populate_plt_entry
to fill in .plt, .got.plt and .rel(a).plt entries. Point
STT_GNU_IFUNC symbols at an .iplt entry if non-call relocations
resolve to it.
(elf32_arm_output_plt_map_1): New function, split out from
elf32_arm_output_plt_map. Handle .iplt entries. Use
elf32_arm_plt_needs_thumb_stub_p.
(elf32_arm_output_plt_map): Call it.
(elf32_arm_output_arch_local_syms): Add mapping symbols for
local .iplt entries.
(elf32_arm_swap_symbol_in): Handle Thumb STT_GNU_IFUNC symbols.
(elf32_arm_swap_symbol_out): Likewise.
(elf32_arm_add_symbol_hook): New function.
(elf_backend_add_symbol_hook): Define for all targets.
opcodes/
* arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.
gas/
* config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
determine whether a relocation is needed.
(md_apply_fix, arm_apply_sym_value): Likewise.
ld/testsuite/
* ld-arm/ifunc-1.s, ld-arm/ifunc-1.dd, ld-arm/ifunc-1.gd,
ld-arm/ifunc-1.rd, ld-arm/ifunc-2.s, ld-arm/ifunc-2.dd,
ld-arm/ifunc-2.gd, ld-arm/ifunc-2.rd, ld-arm/ifunc-3.s,
ld-arm/ifunc-3.dd, ld-arm/ifunc-3.gd, ld-arm/ifunc-3.rd,
ld-arm/ifunc-4.s, ld-arm/ifunc-4.dd, ld-arm/ifunc-4.gd,
ld-arm/ifunc-4.rd, ld-arm/ifunc-5.s, ld-arm/ifunc-5.dd,
ld-arm/ifunc-5.gd, ld-arm/ifunc-5.rd, ld-arm/ifunc-6.s,
ld-arm/ifunc-6.dd, ld-arm/ifunc-6.gd, ld-arm/ifunc-6.rd,
ld-arm/ifunc-7.s, ld-arm/ifunc-7.dd, ld-arm/ifunc-7.gd,
ld-arm/ifunc-7.rd, ld-arm/ifunc-8.s, ld-arm/ifunc-8.dd,
ld-arm/ifunc-8.gd, ld-arm/ifunc-8.rd, ld-arm/ifunc-9.s,
ld-arm/ifunc-9.dd, ld-arm/ifunc-9.gd, ld-arm/ifunc-9.rd,
ld-arm/ifunc-10.s, ld-arm/ifunc-10.dd, ld-arm/ifunc-10.gd,
ld-arm/ifunc-10.rd, ld-arm/ifunc-11.s, ld-arm/ifunc-11.dd,
ld-arm/ifunc-11.gd, ld-arm/ifunc-11.rd, ld-arm/ifunc-12.s,
ld-arm/ifunc-12.dd, ld-arm/ifunc-12.gd, ld-arm/ifunc-12.rd,
ld-arm/ifunc-13.s, ld-arm/ifunc-13.dd, ld-arm/ifunc-13.gd,
ld-arm/ifunc-13.rd, ld-arm/ifunc-14.s, ld-arm/ifunc-14.dd,
ld-arm/ifunc-14.gd, ld-arm/ifunc-14.rd, ld-arm/ifunc-15.s,
ld-arm/ifunc-15.dd, ld-arm/ifunc-15.gd, ld-arm/ifunc-15.rd,
ld-arm/ifunc-16.s, ld-arm/ifunc-16.dd, ld-arm/ifunc-16.gd,
ld-arm/ifunc-16.rd, ld-arm/ifunc-dynamic.ld,
ld-arm/ifunc-static.ld: New tests.
* ld-arm/farcall-group.d, ld-arm/farcall-group-size2.d,
ld-arm/farcall-mixed-lib-v4t.d, ld-arm/farcall-mixed-lib.d: Update
for new stub hashes.
* ld-arm/arm-elf.exp: Run them.
|
