aboutsummaryrefslogtreecommitdiff
path: root/ld/emulparams
AgeCommit message (Collapse)AuthorFilesLines
2024-07-05LoongArch: Add DT_RELR supportXi Ruoyao1-0/+1
The logic is same as a71d87680110 ("aarch64: Add DT_RELR support"). As LoongArch does not have -z dynamic-undefined-weak, we don't need to consider UNDEFWEAK_NO_DYNAMIC_RELOC. The linker relaxation adds another layer of complexity. When we delete bytes in a section during relaxation, we need to fix up the offset in the to-be-packed relative relocations against this section. Signed-off-by: Xi Ruoyao <xry111@xry111.site>
2024-06-25aarch64: Add DT_RELR support for ILP32 ABISzabolcs Nagy2-0/+4
Extend the 64bit DT_RELR support to work on 32bit ELF too. For this only a few changes were needed in the sizing and creation of the relr relocations.
2024-06-14x86: Add -z isa-level-report=[none|all|needed|used]H.J. Lu4-0/+28
Add -z isa-level-report=[none|all|needed|used] to the x86 ELF linker to report needed and used x86-64 ISA levels. bfd/ PR ld/31868 * elf-linker-x86.h (elf_x86_isa_level_report): New. (elf_linker_x86_params): Add isa_level_report. * elfxx-x86.c (report_isa_level): New. (_bfd_x86_elf_link_setup_gnu_properties): Check -z isa-level-report=[none|all|needed|used] to report needed and used x86-64 ISA level. ld/ PR ld/31868 * NEWS: Mention -z isa-level-report=[none|all|needed|used]. * ld.texi: Document -z isa-level-report=[none|all|needed|used]. * emulparams/elf32_x86_64.sh: Source x86-64-level-report.sh. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Likewise. * emulparams/x86-64-level-report.sh: New file. * testsuite/ld-i386/pr31868a.d: Likewise. * testsuite/ld-i386/pr31868b.d: Likewise. * testsuite/ld-i386/pr31868c.d: Likewise. * testsuite/ld-x86-64/pr31868a-x32.d: Likewise. * testsuite/ld-x86-64/pr31868a.d: Likewise. * testsuite/ld-x86-64/pr31868a.l: Likewise. * testsuite/ld-x86-64/pr31868a.s: Likewise. * testsuite/ld-x86-64/pr31868b-x32.d: Likewise. * testsuite/ld-x86-64/pr31868b.d: Likewise. * testsuite/ld-x86-64/pr31868b.l: Likewise. * testsuite/ld-x86-64/pr31868b.s: Likewise. * testsuite/ld-x86-64/pr31868c-x32.d: Likewise. * testsuite/ld-x86-64/pr31868c.d: Likewise. * testsuite/ld-x86-64/pr31868c.l: Likewise. * testsuite/ld-i386/i386.exp: Run PR ld/31868 tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
2024-05-31aarch64: Add DT_RELR supportSzabolcs Nagy3-0/+6
The logic to decide if an input relocation for a symbol becomes a particular kind of output relocation is one of the hard to maintain parts of the bfd ld backend, since it is partially repeated across elfNN_aarch64_check_relocs (where dynamic relocations are counted per symbol and input section), elfNN_aarch64_late_size_sections (where relocation sections are sized and GOT offsets assigned), elfNN_aarch64_relocate_section (where most relocations are applied and output to a relocation section), elfNN_aarch64_finish_dynamic_symbol (where some of the GOT relocations are applied and output). The DT_RELR support adds another layer to this complexity: after the output relocation sections are sized, so all dynamic relocations are accounted (in elfNN_aarch64_late_size_sections), we scan the symbols and input relocations again to decide which ones become relative relocations that can be packed. The sizes of the relocation sections are updated accordingly. This logic must be consistent with the code that applies the relocs later so each relative relocation is emitted exactly once: either in .rela.* or packed in .relr.dyn. Sizing of .relr.dyn is done via elfNN_aarch64_size_relative_relocs that may be called repeatedly whenever the layout changes since an address change can affect the size of the packed format. Then the final content is emitted in elfNN_aarch64_finish_relative_relocs, that is called after the layout is final and before relocations are applied and emitted. These hooks are only called if DT_RELR is enabled. We only pack relative relocs that are known to be aligned in the output during .relr.dyn sizing, the potentially unaligned relative relocs are emitted normally (in .rela.*, not packed), because the format requires aligned addresses.
2024-05-28ld: pru: Increase the default memory region sizesDimitar Dimitrov1-2/+2
The default memory region sizes for PRU were set somewhat arbitrarily to the sizes of the most popular BeagleBone board with AM33x SoC. But the PRU toolchain documentation has always instructed to use SoC-specific spec files to override the defaults and set the correct memory sizes [1]. The small default memory sizes can cause IMEM memory region overflow even for simple printf("Hello world") programs, as usually done by Autotools checks. The stdio is simply too big to fit in 8K instruction memory. This can confuse the check and lead to wrong feature selection during configure [2]. Fix by bumping the default DMEM and IMEM memory sizes. There is no need to backport this patch. Issue was caught with a feature-rich newlib build used for daily CI. The release builds of the PRU toolchain use stripped newlib configuration, which does not overflow the IMEM region, even for 8K. [1] https://github.com/dinuxbg/gnuprumcu [2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=115158 Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2024-04-09LoongArch: ld: Move .got .got.plt before .data and protect .got with relromengqinggang1-1/+4
Move .got .got.plt before .data so .got can be protected with -zrelro. And the first two entries of .got.plt (_dl_runtime_resolve and link map) are placed within the relro region.
2024-04-01hppa: Implement PA 2.0 symbolic relocations for long displacementsJohn David Anglin1-0/+1
The PA 2.0 architecture introduced several new load and store instructions with long displacements. These include floating point loads and stores for word mode, and integer and floating point loads and stores for double words. Currently, ld does not correctly support symbolic relocations for these instructions. If these are used, ld applies the standard R_PARISC_DPREL14R relocation and corrupts the instruction. This change uses bfd_hppa_insn2fmt to determine the correct relocation format. We need to check the computed displacement as the immediate value used in these instruction must be a multiple of 4 or 8 depending on whether the access is for a word or double word. A misaligned offset can potentially occur if the symbol is not properly aligned or if $global$ (the global pointer) is not double word aligned. $global$ is provided as a .data section start symbol. The patch adjusts elf.sc and hppalinux.sh to align .data to a 8-byte boundary in non-shared and non-pie links. 2024-04-01 John David Anglin <danglin@gcc.gnu.org> PR ld/31503 bfd/ChangeLog: * elf32-hppa.c (final_link_relocate): Output ld/ChangeLog: * emulparams/hppalinux.sh (DATA_SECTION_ALIGNMENT): Define. * scripttempl/elf.sc: Align .data section to DATA_SECTION_ALIGNMENT when relocating.
2024-01-19ld: Put all emulation options in ldlex.hH.J. Lu2-9/+0
For each command line option, parse_args() calls ldemul_parse_args() to check if the command line option is an emulation option. But when there is a conflict between the emulation option value and the default option value, the default command line option will be processed as if the emulation option is used. Remove PARSE_AND_LIST_PROLOGUE and move all emulation options to ldlex.h to avoid conflicts. PR ld/31247 * ldlex.h (option_values): Add all emulation options. * emulparams/elf32mcore.sh (PARSE_AND_LIST_PROLOGUE): Removed. * emulparams/plt_unwind.sh (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/aarch64elf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/alphaelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/armelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/avrelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/bfin.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/cskyelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/hppaelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/ia64elf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/m68hc1xelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/m68kelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/metagelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/mipself.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/nds32elf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/nto.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/ppc32elf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/ppc64elf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/riscvelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/rxelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/s390.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/scoreelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/spuelf.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/tic6xdsbt.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/vxworks.em (PARSE_AND_LIST_PROLOGUE): Likewise. * emultempl/aix.em: Include "ldlex.h". (OPTION_XXX): Removed. (gld${EMULATION_NAME}_read_file): Replace lineno with linenumber. * emultempl/beos.em (OPTION_XXX): Removed. * emultempl/elf.em: Include "ldlex.h". Don't check PARSE_AND_LIST_PROLOGUE. (OPTION_XXX): Removed. * emultempl/msp430.em: Include "ldlex.h". (OPTION_XXX): Removed. * emultempl/pe.em (OPTION_XXX): Removed. * emultempl/pep.em (OPTION_XXX): Likewise. * emultempl/ticoff.em: Include "ldlex.h". (OPTION_XXX): Removed. * emultempl/vms.em: Include "ldlex.h". (OPTION_XXX): Removed. * emultempl/xtensaelf.em (elf32xtensa_size_opt, elf32xtensa_no_literal_movement, elf32xtensa_abi): Moved out of PARSE_AND_LIST_PROLOGUE. (PARSE_AND_LIST_PROLOGUE): Removed.
2024-01-09ld: Add --enable-mark-plt configure optionH.J. Lu1-1/+6
Add --enable-mark-plt linker configure option to mark PLT entries with DT_X86_64_PLT, DT_X86_64_PLTSZ and DT_X86_64_PLTENT dynamic tags by default. * NEWS: Mention -z mark-plt/-z nomark-plt and --enable-mark-plt. * config.in: Regenerated. * configure: Likewise. * configure.ac: Add --enable-mark-plt. (DEFAULT_LD_Z_MARK_PLT): New AC_DEFINE_UNQUOTED. * emulparams/x86-64-plt.sh (PARSE_AND_LIST_OPTIONS_X86_64_PLT): Support DEFAULT_LD_Z_MARK_PLT. * emultempl/elf-x86.em (elf_x86_64_before_parse): New function. (LDEMUL_BEFORE_PARSE): New. Set to elf_x86_64_before_parse for x86-64 targets.
2024-01-08Add support for the aarch64-gnu target (GNU/Hurd on AArch64)Sergey Bugaev1-0/+37
Also recognized are aarch64-*-gnu tagrets, e.g. aarch64-pc-gnu or aarch64-unknown-gnu. The ld/emulparams/aarch64gnu.sh file is (for now) identical to aarch64fbsd.sh, or to aarch64linux.sh with Linux-specific logic removed; and mainly different from the generic aarch64elf.sh in that it does not set EMBEDDED=yes. Coupled with a corresponding GCC patch, this produces a toolchain that can sucessfully build working binaries targeting aarch64-gnu. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
2024-01-04Update year range in copyright notice of binutils filesAlan Modra4-4/+4
Adds two new external authors to etc/update-copyright.py to cover bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then updates copyright messages as follows: 1) Update cgen/utils.scm emitted copyrights. 2) Run "etc/update-copyright.py --this-year" with an extra external author I haven't committed, 'Kalray SA.', to cover gas testsuite files (which should have their copyright message removed). 3) Build with --enable-maintainer-mode --enable-cgen-maint=yes. 4) Check out */po/*.pot which we don't update frequently.
2023-12-21ld: Add lib32 directories for 32-bit emulation on FreeBSD/amd64Rainer Orth1-0/+8
GNU ld currently fails to link 32-bit executables on FreeBSD/amd64 when the linked libraries have dependencies on shared objects themselves: $ gcc -m32 -o ei ei.c -lexecinfo /var/gcc/binutils/amd64/lib/gcc/amd64-pc-freebsd14.0/13.2.0/../../../../amd64-pc-freebsd14.0/bin/ld: warning: libelf.so.2, needed by /usr/lib/../lib32/libexecinfo.so, not found (try using -rpath or -rpath-link) /var/gcc/binutils/amd64/lib/gcc/amd64-pc-freebsd14.0/13.2.0/../../../../amd64-pc-freebsd14.0/bin/ld: /usr/lib/../lib32/libexecinfo.so: undefined reference to `elf_begin@R1.0' [...] Fixed by handling FreeBSD/amd64 like Linux/x86. Tested on amd64-pc-freebsd14.0.
2023-12-12Support rodata in flash for more AVR devicesGeorg-Johann Lay4-0/+66
PR 31124 * Makefile.am (ALL_EMULATION_SOURCES): Add eavrxmega2_flmap.c and eavrxmega4_flmap.c. * Makefile.in: Regenerate. * configure.tgt: Add eavrxmega2_flmap and eavrxmega4_flmap to avr's targ_extra_emuls list. * emulparams/avrxmega2.sh (MAYBE_FLMAP): Define. * emulparams/avrxmega2_flmap.sh: New file. * emulparams/avrxmega4.sh (MAYBE_FLMAP): Define. * emulparams/avrxmega4_flmap.sh: New file. * scripttempl/avr.sc: Add support for HAVE_FLMAP.
2023-09-29x86-64: Add -z mark-plt and -z nomark-pltH.J. Lu3-0/+16
The PLT entry in executables and shared libraries contains an indirect branch, like jmp *foo@GOTPCREL(%rip) push $index_foo jmp .PLT0 or endbr64 jmp *foo@GOTPCREL(%rip) NOP padding which is used to branch to the function, foo, defined in another object. Each R_X86_64_JUMP_SLOT relocation has a corresponding PLT entry. The dynamic tags have been added to the x86-64 psABI to mark such PLT entries: https://gitlab.com/x86-psABIs/x86-64-ABI/-/commit/6d824a52a42d173eb838b879616c1be5870b593e Add an x86-64 linker option, -z mark-plt, to mark PLT entries with #define DT_X86_64_PLT (DT_LOPROC + 0) #define DT_X86_64_PLTSZ (DT_LOPROC + 1) #define DT_X86_64_PLTENT (DT_LOPROC + 3) 1. DT_X86_64_PLT: The address of the procedure linkage table. 2. DT_X86_64_PLTSZ: The total size, in bytes, of the procedure linkage table. 3. DT_X86_64_PLTENT: The size, in bytes, of a procedure linkage table entry. and set the r_addend field of the R_X86_64_JUMP_SLOT relocation to the memory offset of the indirect branch instruction. The dynamic linker can use these tags to update the PLT section to direct branch. bfd/ * elf-linker-x86.h (elf_linker_x86_params): Add mark_plt. * elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Set the r_addend of R_X86_64_JUMP_SLOT to the indirect branch offset in PLT entry for -z mark-plt. * elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Add DT_X86_64_PLT, DT_X86_64_PLTSZ and DT_X86_64_PLTENT for -z mark-plt. (_bfd_x86_elf_finish_dynamic_sections): Set DT_X86_64_PLT, DT_X86_64_PLTSZ and DT_X86_64_PLTENT. (_bfd_x86_elf_get_synthetic_symtab): Ignore addend for JUMP_SLOT relocation. (_bfd_x86_elf_link_setup_gnu_properties): Set plt_indirect_branch_offset. * elfxx-x86.h (elf_x86_plt_layout): Add plt_indirect_branch_offset. binutils/ * readelf.c (get_x86_64_dynamic_type): New function. (get_dynamic_type): Call get_x86_64_dynamic_type. include/ * elf/x86-64.h (DT_X86_64_PLT): New. (DT_X86_64_PLTSZ): Likewise. (DT_X86_64_PLTENT): Likewise. ld/ * ld.texi: Document -z mark-plt and -z nomark-plt. * emulparams/elf32_x86_64.sh: Source x86-64-plt.sh. * emulparams/elf_x86_64.sh: Likewise. * emulparams/x86-64-plt.sh: New file. * testsuite/ld-x86-64/mark-plt-1.s: Likewise. * testsuite/ld-x86-64/mark-plt-1a-x32.d: Likewise. * testsuite/ld-x86-64/mark-plt-1a.d: Likewise. * testsuite/ld-x86-64/mark-plt-1b-x32.d: Likewise. * testsuite/ld-x86-64/mark-plt-1b.d: Likewise. * testsuite/ld-x86-64/mark-plt-1c-x32.d: Likewise. * testsuite/ld-x86-64/mark-plt-1c.d: Likewise. * testsuite/ld-x86-64/mark-plt-1d-x32.d: Likewise. * testsuite/ld-x86-64/mark-plt-1d.d: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run -z mark-plt tests.
2023-09-25Revert "arc: Add new linker emulation and scripts for ARCv3 ISA."Claudiu Zissulescu4-68/+0
This reverts commit 4deb1ee57fdb711cac6f36fed75b3c8cb5112d99.
2023-09-25RISC-V: Protect .got with relroAndreas Schwab2-0/+5
Move .got before .data so that it can be protected with -zrelro. Also separate .got.plt from .got if -znow is not in effect; the first two words of .got.plt are placed within the relro region. ld: PR ld/30877 * emulparams/elf32lriscv-defs.sh (DATA_GOT, SEPARATE_GOTPLT): Define. * emulparams/elf64lriscv-defs.sh (SEPARATE_GOTPLT): Define. * testsuite/ld-elf/binutils.exp (binutils_test): Remove riscv*-*-* from relro_got expression.
2023-09-25arc: Add new linker emulation and scripts for ARCv3 ISA.Claudiu Zissulescu4-0/+68
Add ARCv3's linker bits. Remove obsolete tests. ld/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> * ld/Makefile.am: Add ARC64 targets. * ld/configure.tgt: Likewise. * ld/Makefile.in: Regenerate. * ld/emulparams/arc64elf32.sh: New file. * ld/emulparams/arc64elf64.sh: Likewise. * ld/emulparams/arc64linux32.sh: Likewise. * ld/emulparams/arc64linux64.sh: Likewise. * ld/scripttempl/elfarc.sc: Update stack and heap definitions. * ld/testsuite/ld-arc/got-weak.d: Deleted file. * ld/testsuite/ld-arc/got-weak.s: Likewise. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
2023-08-16kvx: New port.Paul Iannetta3-0/+112
2023-08-02Revert "2.41 Release sources"Sam James2-0/+2
This reverts commit 675b9d612cc59446e84e2c6d89b45500cb603a8d. See https://sourceware.org/pipermail/binutils/2023-August/128761.html.
2023-08-022.41 Release sourcesbinutils-2_41-releaseNick Clifton2-2/+0
2023-07-28MIPS/LD: Include n64 `.interp' with INITIAL_READONLY_SECTIONSYunQiang Su1-1/+5
In ld/emulparams/elf64bmip-defs.sh there is no explicit handling of the `.interp' section, which causes it to be positioned in output at an odd place. Let's include it with INITIAL_READONLY_SECTIONS, just like o32/n32 do, fixing a regression from commit 5a8e7be242f3 ("INITIAL_READONLY_SECTIONS in elf.sc"), where the handling of n64 was missed due to an unfortunate sequence of events where ld/emulparams/elf64bmip-defs.sh was only added with commit 94bb04b3c611 ("Use .reginfo rather than .MIPS.options in n32 linker scripts") the day before. Add test cases covering section ordering across the three ABIs. This change also fixes ld/pr23658-2: FAIL: Build pr23658-2 Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk> ld/ChangeLog: * emulparams/elf64bmip-defs.sh: Include `.interp' with INITIAL_READONLY_SECTIONS. * testsuite/ld-mips-elf/pie-n64.d: Adjust addresses. * testsuite/ld-mips-elf/sections-1-o32.rd: New test. * testsuite/ld-mips-elf/sections-1-o32t.rd: New test. * testsuite/ld-mips-elf/sections-1-n32.rd: New test. * testsuite/ld-mips-elf/sections-1-n32t.rd: New test. * testsuite/ld-mips-elf/sections-1-n32p.rd: New test. * testsuite/ld-mips-elf/sections-1-n64.rd: New test. * testsuite/ld-mips-elf/sections-1-n64t.rd: New test. * testsuite/ld-mips-elf/sections-2-o32.rd: New test. * testsuite/ld-mips-elf/sections-2-o32t.rd: New test. * testsuite/ld-mips-elf/sections-2-n32.rd: New test. * testsuite/ld-mips-elf/sections-2-n32t.rd: New test. * testsuite/ld-mips-elf/sections-2-n32p.rd: New test. * testsuite/ld-mips-elf/sections-2-n64.rd: New test. * testsuite/ld-mips-elf/sections-2-n64t.rd: New test. * testsuite/ld-mips-elf/sections.s: New test source. * testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
2023-07-05Align linkerscript symbols according to ABIAndreas Krebbel2-0/+2
Apply ABI specific alignment to symbols generated in the default linker script.
2023-04-17Add support for the .gnu.sgstubs section to the linker for ARM/ELF based ↵Nick Clifton1-0/+2
targets. PR 30354 * emulparams/armelf.sh (OTHER_PLT_SECTIONS): Define in order to handle the .gnu.sgstubs section.
2023-03-16ld: add support of QNX stack arguments for aarch64ntoClément Chigot1-1/+1
QNX is handling the stack argument using a .note section. Generate it according to ELF argument -zexecstack, -zstack-size and a new NTO argument --lazy-stack. Another NTO argument --stack mimicking -zstack-size is added in order to ensure compatibility with previously made NTO linkers. This requires a new emultempl nto.em which is applied above the default ${ARCH}elf.em. ld/ChangeLog: * emulparams/aarch64nto.sh: Move to nto.em. * emultempl/nto.em: New file. * testsuite/ld-aarch64/aarch64-nto.exp: New test. * testsuite/ld-aarch64/nto-stack-note-1.d: New test. * testsuite/ld-aarch64/nto-stack-note-2.d: New test. * testsuite/ld-aarch64/start.s: New test.
2023-03-16configure: add new target aarch64-*-nto*Clément Chigot1-0/+41
This target has its own ld emulation based on aarch64elf.em.
2023-01-05Add an extra emulation called arm64pe to the aarch64pe emulation.Nick Clifton1-0/+4
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-12-14Fix haiku ld dependenciesAlan Modra5-8/+8
I noticed after commit 8ad93045ed, "ld, gold: remove support for -z bndplt (MPX prefix)", that some of my builds were failing with eelf_x86_64_haiku.c:650:9: error: no member named 'bndplt' in 'struct elf_linker_x86_params' params.bndplt = true; ~~~~~~ ^ * emulparams/aarch64haiku.sh: Use "source_sh" rather than ".". * emulparams/armelf_haiku.sh: Likewise. * emulparams/elf32ppchaiku.sh: Likewise. * emulparams/elf_mipsel_haiku.sh: Likewise. * emulparams/elf_x86_64_haiku.sh: Likewise.
2022-12-14ld, gold: remove support for -z bndplt (MPX prefix)Martin Liska1-10/+0
bfd/ChangeLog: * elf-linker-x86.h (struct elf_linker_x86_params): Remove bndplt. * elf64-x86-64.c (elf_x86_64_scan_relocs): Ignore R_X86_64_PLT32_BND. (elf_x86_64_relocate_section): Similarly here. (elf_x86_64_link_setup_gnu_properties): Ignore bndplt. * elfxx-x86.c: Likewise. * elfxx-x86.h: Likewise. gold/ChangeLog: * NEWS: Document -z bndplt. * options.h (class General_options): Remove bndplt option. * x86_64.cc (class Output_data_plt_x86_64_bnd): Remove. (Target_x86_64::do_make_data_plt): Do not use Output_data_plt_x86_64_bnd. (Target_x86_64::Scan::get_reference_flags): Likewise. (Target_x86_64::Scan::check_non_pic): Likewise. (Target_x86_64::Scan::local): Likewise. (Target_x86_64::Scan::global): Likewise. ld/ChangeLog: * NEWS: Document -z bndplt. * emulparams/elf_x86_64.sh: Remove bndplt option. * ld.texi: Likewise. * testsuite/ld-x86-64/x86-64.exp: * testsuite/ld-x86-64/bnd-branch-1-now.d: Removed. * testsuite/ld-x86-64/bnd-branch-1.d: Removed. * testsuite/ld-x86-64/bnd-branch-1.s: Removed. * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Removed. * testsuite/ld-x86-64/bnd-ifunc-1.d: Removed. * testsuite/ld-x86-64/bnd-ifunc-1.s: Removed. * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Removed. * testsuite/ld-x86-64/bnd-ifunc-2.d: Removed. * testsuite/ld-x86-64/bnd-ifunc-2.s: Removed. * testsuite/ld-x86-64/bnd-plt-1-now.d: Removed. * testsuite/ld-x86-64/bnd-plt-1.d: Removed. * testsuite/ld-x86-64/mpx.exp: Removed. * testsuite/ld-x86-64/mpx1.out: Removed. * testsuite/ld-x86-64/mpx1a.c: Removed. * testsuite/ld-x86-64/mpx1a.rd: Removed. * testsuite/ld-x86-64/mpx1b.c: Removed. * testsuite/ld-x86-64/mpx1c.c: Removed. * testsuite/ld-x86-64/mpx1c.rd: Removed. * testsuite/ld-x86-64/mpx2.out: Removed. * testsuite/ld-x86-64/mpx2a.c: Removed. * testsuite/ld-x86-64/mpx2a.rd: Removed. * testsuite/ld-x86-64/mpx2b.c: Removed. * testsuite/ld-x86-64/mpx2c.c: Removed. * testsuite/ld-x86-64/mpx2c.rd: Removed. * testsuite/ld-x86-64/mpx3.dd: Removed. * testsuite/ld-x86-64/mpx3a.s: Removed. * testsuite/ld-x86-64/mpx3b.s: Removed. * testsuite/ld-x86-64/mpx3n.dd: Removed. * testsuite/ld-x86-64/mpx4.dd: Removed. * testsuite/ld-x86-64/mpx4a.s: Removed. * testsuite/ld-x86-64/mpx4b.s: Removed. * testsuite/ld-x86-64/mpx4n.dd: Removed. * testsuite/ld-x86-64/pr20800a.S: Removed. * testsuite/ld-x86-64/pr20800b.S: Removed. * testsuite/ld-x86-64/pr21038a-now.d: Removed. * testsuite/ld-x86-64/pr21038a.d: Removed. * testsuite/ld-x86-64/pr21038a.s: Removed. * testsuite/ld-x86-64/pr21038b-now.d: Removed. * testsuite/ld-x86-64/pr21038b.d: Removed. * testsuite/ld-x86-64/pr21038b.s: Removed. * testsuite/ld-x86-64/pr21038c-now.d: Removed. * testsuite/ld-x86-64/pr21038c.d: Removed. * testsuite/ld-x86-64/pr21038c.s: Removed.
2022-10-19aarch64-pe support for LD, GAS and BFDJedidiah Thompson1-0/+9
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE. Based on initial work by Jedidiah Thompson Co-authored-by: Jedidiah Thompson <wej22007@outlook.com> Co-authored-by: Zac Walker <zac.walker@linaro.org>
2022-07-25Re: PowerPC64 .branch_lt addressAlan Modra1-1/+21
On seeing PR29369 my suspicion was naturally on a recent powerpc64 change, commit 0ab80031430e. Without a reproducer, I spent time wondering what could have gone wrong, and while I doubt this patch would have fixed the PR, there are some improvements that can be made to cater for user silliness. I also noticed that when -z relro -z now sections are created out of order, with .got before .plt in the section headers but .got is laid out at a higher address. That's due to the address expression for .branch_lt referencing SIZEOF(.got) and so calling init_os (which creates a bfd section) for .got before the .plt section is created. Fix that by ignoring SIZEOF in exp_init_os. Unlike ADDR and LOADADDR which need to reference section vma and lma respectively, SIZEOF can and does cope with a missing bfd section by returning zero for its size, which of course is correct. PR 29369 * ldlang.c (exp_init_os): Don't create a bfd section for SIZEOF. * emulparams/elf64ppc.sh (OTHER_RELRO_SECTIONS_2): Revise .branch_lt address to take into account possible user sections with alignment larger than 8 bytes.
2022-06-27drop XC16x bitsJan Beulich3-24/+0
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved the architecture from the "obsolete but still available" to the "obsolete / support removed" list in config.bfd, making the architecture impossible to enable (except maybe via "enable everything" options"). Note that I didn't touch */po/*.po{,t} on the assumption that these would be updated by some (half)automatic means.
2022-06-27PowerPC64 .branch_lt addressAlan Modra1-1/+1
.branch_lt is really an extension of .plt, as is .iplt. We'd like all of the PLT sections to be fixed relative to .TOC. after stub sizing, because changes in offset to PLT entries might mean a change in stub sizes. When -z relro, the relro layout does this by laying out sections from the end of the relro segment. So for example, a change in .eh_frame (which happens after stub sizing) will keep the same GOT to PLT offset when -z relro. Not so when -z norelro, because then the usual forward layout of section is done and .got is more aligned than .branch_lt. * emulparams/elf64ppc.sh: Set .branch_lt address fixed relative to .got. * testsuite/ld-powerpc/elfv2exe.d: Adjust to suit.
2022-03-24x86: drop L1OM/K1OM support from ldJan Beulich4-84/+0
This was only rudimentary support anyway; none of the sub-architecture specific insns were ever supported.
2022-01-22Adjust default page sizes for haiku arm.Alexander von Gluck IV1-2/+2
* configure.tgt (arm-haiku): Fix typo. * emulparams/armelf_haiku.su (MAXPAGESIZE): Use the default value. (COMMONPAGESIZE): Likewise.
2022-01-18PowerPC64 DT_RELRAlan Modra1-0/+1
PowerPC64 takes a more traditional approach to DT_RELR than x86. Count relative relocs in check_relocs, allocate space for them and output in the usual places but not doing so when enable_dt_relr. DT_RELR is sized in the existing ppc stub relaxation machinery, run via the linker's ldemul_after_allocation hook. DT_RELR is output in the same function that writes ppc stubs, run via ldemul_finish. This support should be considered experimental. bfd/ * elf64-ppc.c (struct ppc_local_dyn_relocs): Renamed from ppc_dyn_relocs. Add rel_count field. Update uses. (struct ppc_dyn_relocs): New. Replace all uses of elf_dyn_relocs. (struct ppc_link_hash_table): Add relr_alloc, relr_count and relr_addr. (ppc64_elf_copy_indirect_symbol): Merge rel_count. (ppc64_elf_check_relocs): Init rel_count for global and local syms. (dec_dynrel_count): Change r_info param to reloc pointer. Update all callers. Handle decrementing rel_count. (allocate_got): Don't allocate space for relative relocs when enable_dt_relr. (allocate_dynrelocs): Likewise. (ppc64_elf_size_dynamic_sections): Likewise. Handle srelrdyn. (ppc_build_one_stub): Don't emit relative relocs on .branch_lt. (compare_relr_address, append_relr_off): New functions. (got_and_plt_relr_for_local_syms, got_and_plt_relr): Likewise. (ppc64_elf_size_stubs): Size .relr.syn. (ppc64_elf_build_stubs): Emit .relr.dyn. (build_global_entry_stubs_and_plt): Don't output relative relocs when enable_dt_relr. (write_plt_relocs_for_local_syms): Likewise. (ppc64_elf_relocate_section): Likewise. binutils/ * testsuite/lib/binutils-common.exp (supports_dt_relr): Add powerpc64. ld/ * emulparams/elf64ppc.sh: Source dt-relr.sh. * testsuite/ld-elf/dt-relr-2b.d: Adjust for powerpc. * testsuite/ld-elf/dt-relr-2c.d: Likewise. * testsuite/ld-elf/dt-relr-2d.d: Likewise. * testsuite/ld-elf/dt-relr-2e.d: Likewise.
2022-01-12ld: Initial DT_RELR supportH.J. Lu4-0/+21
Add a -z pack-relative-relocs option to enable DT_RELR and create a relr.dyn section for DT_RELR. DT_RELR is implemented with the linker relaxation infrastructure, but it doesn't require the --relax option enabled. -z pack-relative-relocs implies -z combreloc. -z nocombreloc implies -z nopack-relative-relocs. -z pack-relative-relocs is chosen over the similar option in lld, --pack-dyn-relocs=relr, to implement a glibc binary lockout mechanism with a special glibc version symbol, to avoid random crashes of DT_RELR binaries with the existing glibc binaries. bfd/ * elf-bfd.h (elf_link_hash_table): Add srelrdyn. * elflink.c (_bfd_elf_link_create_dynamic_sections): Create a .relr.dyn section for DT_RELR. include/ * bfdlink.h (bfd_link_info): Add enable_dt_relr. ld/ * News: Mention -z pack-relative-relocs and -z nopack-relative-relocs. * ld.texi: Document -z pack-relative-relocs and -z nopack-relative-relocs. * ldelf.c (ldelf_after_parse): Disable DT_RELR if not building PIE nor shared library. Add 3 spare dynamic tags for DT_RELR, DT_RELRSZ and DT_RELRENT. * ldlang.c (lang_relax_sections): Also enable relaxation if DT_RELR is enabled. * emulparams/elf32_x86_64.sh: Source dt-relr.sh. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Likewise. * emulparams/dt-relr.sh: New file. * scripttempl/elf.sc: Support .relr.dyn.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-10-24LoongArch ld supportliuzhensong4-0/+97
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn> Zhensong Liu <liuzhensong@loongson.cn> Weinan Liu <liuweinan@loongson.cn> Xiaolin Tang <tangxiaolin@loongson.cn> ld/ * Makefile.am: Add LoongArch. * NEWS: Mention LoongArch support. * configure.tgt: Add LoongArch. * emulparams/elf32loongarch-defs.sh: New. * emulparams/elf32loongarch.sh: Likewise. * emulparams/elf64loongarch-defs.sh: Likewise. * emulparams/elf64loongarch.sh: Likewise. * emultempl/loongarchelf.em: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. ld/testsuite/ * ld-loongarch-elf/disas-jirl.d: New. * ld-loongarch-elf/disas-jirl.s: Likewise. * ld-loongarch-elf/jmp_op.d: Likewise. * ld-loongarch-elf/jmp_op.s: Likewise. * ld-loongarch-elf/ld-loongarch-elf.exp: Likewise. * ld-loongarch-elf/macro_op.d: Likewise. * ld-loongarch-elf/macro_op.s: Likewise. * ld-loongarch-elf/syscall-0.s: Likewise. * ld-loongarch-elf/syscall-1.s: Likewise. * ld-loongarch-elf/syscall.d: Likewise. * ld-srec/srec.exp: Add LoongArch. * ld-unique/pr21529.d: Likewise.
2021-09-02Add support for the haiku operating system. These are the os support ↵Alexander von Gluck IV7-0/+92
patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time.
2021-07-08elf: Add GNU_PROPERTY_1_NEEDED checkH.J. Lu1-0/+10
If GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS is set on any input relocatable files: 1. Don't generate copy relocations. 2. Turn off extern_protected_data since it implies GNU_PROPERTY_NO_COPY_ON_PROTECTED. 3. Treate reference to protected symbols with indirect external access as local. 4. Set GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS on output. 5. When generating executable, clear this bit when there are non-GOT or non-PLT relocations in input relocatable files without the bit set. 6. Add -z [no]indirect-extern-access to control indirect external access. bfd/ * elf-bfd (elf_obj_tdata): Add has_indirect_extern_access. (elf_has_indirect_extern_access): New. * elf-properties.c (_bfd_elf_parse_gnu_properties): Set elf_has_indirect_extern_access and elf_has_no_copy_on_protected when seeing GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS. (elf_write_gnu_propertie): Add an argument to pass link_info. Set needed_1_p for GNU_PROPERTY_1_NEEDED in memory. (_bfd_elf_link_setup_gnu_properties): Handle GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS for -z indirect-extern-access. Set nocopyreloc to true and extern_protected_data to false for indirect external access. (_bfd_elf_convert_gnu_properties): Updated. * elf32-i386.c (elf_i386_check_relocs): Set non_got_ref_without_indirect_extern_access on legacy non-GOT or non-PLT references. * elf64-x86-64.c (elf_x86_64_check_relocs): Likewise. * elflink.c (_bfd_elf_symbol_refs_local_p): Return true for STV_PROTECTED symbols with indirect external access. * elfxx-x86.c (_bfd_x86_elf_adjust_dynamic_symbol): Clear indirect_extern_access for legacy non-GOT/non-PLT references. * elfxx-x86.h (elf_x86_link_hash_entry): Add non_got_ref_without_indirect_extern_access. include/ * bfdlink.h (bfd_link_info): Add indirect_extern_access and needed_1_p. Change nocopyreloc to int. ld/ * NEWS: Mention -z [no]indirect-extern-access * ld.texi: Document -z [no]indirect-extern-access * ldmain.c (main): Initialize link_info.indirect_extern_access to -1. * emulparams/extern_protected_data.sh: Support -z [no]indirect-extern-access. * testsuite/ld-elf/indirect-extern-access-1.rd: New file * testsuite/ld-elf/indirect-extern-access-1a.c: Likewise. * testsuite/ld-elf/indirect-extern-access-1b.c: Likewise. * testsuite/ld-elf/indirect-extern-access-2.rd: Likewise. * testsuite/ld-elf/indirect-extern-access-2a.c: Likewise. * testsuite/ld-elf/indirect-extern-access-2b.c: Likewise. * testsuite/ld-elf/indirect-extern-access-3.rd: Likewise. * testsuite/ld-elf/indirect-extern-access.S: Likewise. * testsuite/ld-elf/property-1_needed-1b.d: Likewise. * testsuite/ld-elf/property-1_needed-1c.d: Likewise. * testsuite/ld-x86-64/indirect-extern-access.rd: Likewise. * testsuite/ld-x86-64/protected-data-1.h: Likewise. * testsuite/ld-x86-64/protected-data-1a.c: Likewise. * testsuite/ld-x86-64/protected-data-1b.c: Likewise. * testsuite/ld-x86-64/protected-data-2a.S: Likewise. * testsuite/ld-x86-64/protected-data-2b.S: Likewise. * testsuite/ld-x86-64/protected-func-2a.S: Likewise. * testsuite/ld-x86-64/protected-func-2b.S: Likewise. * testsuite/ld-x86-64/protected-func-2c.c: Likewise. * testsuite/ld-elf/linux-x86.exp: Run test with GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS. * testsuite/ld-x86-64/x86-64.exp: Run tests for protected function and data with indirect external access.
2021-03-31Use bool in ldAlan Modra14-25/+25
* sysdep.h (POISON_BFD_BOOLEAN): Define. * configure.ac (elf_list_options, elf_shlib_list_options=false), (elf_plt_unwind_list_options=false): Replace FALSE with false, and TRUE with true. * emulparams/call_nop.sh, * emulparams/cet.sh, * emulparams/dynamic_undefined_weak.sh, * emulparams/elf32b4300.sh, * emulparams/elf32lm32.sh, * emulparams/elf32lr5900.sh, * emulparams/elf32lr5900n32.sh, * emulparams/elf32visium.sh, * emulparams/elf_x86_64.sh, * emulparams/extern_protected_data.sh, * emulparams/plt_unwind.sh, * emulparams/reloc_overflow.sh, * emulparams/static.sh, * emulparams/x86-64-lam.sh, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/alphaelf.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/avrelf.em, * emultempl/beos.em, * emultempl/bfin.em, * emultempl/cr16elf.em, * emultempl/crxelf.em, * emultempl/cskyelf.em, * emultempl/elf.em, * emultempl/genelf.em, * emultempl/hppaelf.em, * emultempl/linux.em, * emultempl/m68hc1xelf.em, * emultempl/metagelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmixelf.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pdp11.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc32elf.em, * emultempl/ppc64elf.em, * emultempl/rxelf.em, * emultempl/rxlinux.em, * emultempl/scoreelf.em, * emultempl/solaris2.em, * emultempl/spuelf.em, * emultempl/ticoff.em, * emultempl/v850elf.em, * emultempl/vms.em, * emultempl/xtensaelf.em, * emultempl/z80.em, * ld.h, * ldbuildid.c, * ldbuildid.h, * ldcref.c, * ldctor.c, * ldctor.h, * ldelf.c, * ldelf.h, * ldelfgen.c, * ldelfgen.h, * ldemul.c, * ldemul.h, * ldexp.c, * ldexp.h, * ldfile.c, * ldfile.h, * ldgram.y, * ldlang.c, * ldlang.h, * ldmain.c, * ldmain.h, * ldmisc.c, * ldmisc.h, * ldwrite.c, * lexsup.c, * mri.c, * pe-dll.c, * pe-dll.h, * pep-dll.h, * plugin.c, * plugin.h, * testplug.c, * testplug2.c, * testplug3.c, * testplug4.c: Replace bfd_boolean with bool, FALSE with false, and TRUE with true. * configure: Regenerate.
2021-02-09Remove arm-symbianelfAlan Modra1-25/+0
* configure.ac: Delete arm*-*-symbianelf* entry. * configure: Regenerate. bfd/ * config.bfd (arm*-*-symbianelf*): Move from obsolete to removed. * configure.ac: Delete symbian entries. * elf-bfd.h (enum elf_target_os): Delete is_symbian. * elf32-arm.c: Remove symbian support. Formatting. * targets.c: Delete symbian entries. * configure: Regenerate. binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Remove symbianelf. gas/ * Makefile.am (TARG_ENV_HFILES): Remove config/te-symbian.h. * config/tc-arm.c (elf32_arm_target_format): Remove TE_SYMBIAN support. * config/te-symbian.h: Delete. * configure.tgt: Remove arm-*-symbianelf*. * testsuite/gas/arm/arch4t-eabi.d: Don't mention symbianelf in target selection. * testsuite/gas/arm/arch4t.d: Likewise. * testsuite/gas/arm/got_prel.d: Likewise. * testsuite/gas/arm/mapdir.d: Likewise. * testsuite/gas/arm/mapmisc.d: Likewise. * testsuite/gas/arm/mapsecs.d: Likewise. * testsuite/gas/arm/mapshort-eabi.d: Likewise. * testsuite/gas/arm/thumb-eabi.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumbrel.d: Likewise. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove earmsymbian.c. Don't include symbian dep file. * configure.tgt: Remove arm*-*-symbianelf* entry. * emulparams/armsymbian.sh: Delete. * ld.texi: Don't mention symbian. * scripttempl/armbpabi.sc: Delete. * testsuite/ld-arm/symbian-seg1.d: Delete. * testsuite/ld-arm/symbian-seg1.s: Delete. * testsuite/ld-arm/arm-elf.exp: Don't run symbian-seg1. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2021-01-26PR27226, ld.bfd contains huge .rodata sectionAlan Modra8-8/+6
This makes it possible to build ld without any compiled-in scripts, by setting COMPILE_IN=no in the environment. pe, beos and pdp11 targets didn't support scripts from the file system, with pdp11 nastily editing the ld/ldscripts file so that the built-in script didn't match. PR 27226 * emulparams/alphavms.sh: Don't set COMPILE_IN. * emulparams/elf64_ia64_vms.sh: Likewise. * emulparams/elf64mmix.sh: Likewise. * emulparams/elf_iamcu.sh: Likewise. * emulparams/elf_k1om.sh: Likewise. * emulparams/elf_l1om.sh: Likewise. * emulparams/mmo.sh: Likewise. * emulparams/pdp11.sh: Set DATA_SEG_ADDR. * scripttempl/pdp11.sc: Use it. * emultempl/pdp11.em: Don't edit .xn script for separate_code, instead use .xe script. Support scripts from file system. * emultempl/beos.em: Support scripts from file system. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * testsuite/ld-bootstrap/bootstrap.exp: Make tmpdir/ldscripts link.
2021-01-15ld/x86: Add -z report-relative-relocH.J. Lu4-0/+14
Linker generated relative relocations don't have symbol info: [hjl@gnu-cfl-2 tmpdir]$ readelf -rW dump Relocation section '.rela.dyn' at offset 0x180 contains 2 entries: Offset Info Type Sym. Value Symbol's Name + Addend 00002f70 00000008 R_X86_64_RELATIVE 1000 00002f68 00000025 R_X86_64_IRELATIVE 1007 [hjl@gnu-cfl-2 tmpdir]$ Add -z report-relative-reloc to x86 ELF linker to report dynamic relative relocations: [hjl@gnu-cfl-2 tmpdir]$ ../ld-new -pie -melf32_x86_64 -z report-relative-reloc -o dump report-reloc-1.o dump: R_X86_64_IRELATIVE (offset: 0x00002f68, info: 0x00000025, addend: 0x00001007) against 'ifunc' for section '.data.rel.ro.local' in report-reloc-1.o dump: R_X86_64_RELATIVE (offset: 0x00002f70, info: 0x00000008, addend: 0x00001000) against '_start' for section '.data.rel.ro.local' in report-reloc-1.o [hjl@gnu-cfl-2 tmpdir]$ It can be used to map relative relocations to corresponding symbols. bfd/ * elf-linker-x86.h (elf_linker_x86_params): Add report_relative_reloc. * elf32-i386.c (elf_i386_relocate_section): Call _bfd_x86_elf_link_report_relative_reloc to report relative relocations for -z report-relative-reloc. (elf_i386_finish_dynamic_symbol): Likewse. * elf64-x86-64.c (elf_x86_64_relocate_section): Likewse. (elf_x86_64_finish_dynamic_symbol): Likewse. * elfxx-x86.c (_bfd_x86_elf_link_report_relative_reloc): New function. * elfxx-x86.h (_bfd_x86_elf_link_report_relative_reloc): New prototype. ld/ * NEWS: Mention -z report-relative-reloc. * ld.texi: Document -z report-relative-reloc. * emulparams/elf32_x86_64.sh: Source x86-report-relative.sh. * emulparams/elf_i386.sh: Likewse. * emulparams/elf_x86_64.sh: Likewse. * emulparams/x86-report-relative.sh: New file. * testsuite/ld-i386/report-reloc-1.d: Likewse. * testsuite/ld-i386/report-reloc-1.l: Likewse. * testsuite/ld-i386/report-reloc-1.s: Likewse. * testsuite/ld-x86-64/report-reloc-1-x32.d: Likewse. * testsuite/ld-x86-64/report-reloc-1.d: Likewse. * testsuite/ld-x86-64/report-reloc-1.l: Likewse. * testsuite/ld-x86-64/report-reloc-1.s: Likewse. * testsuite/ld-i386/i386.exp: Run report-reloc-1. * testsuite/ld-x86-64/x86-64.exp: Run report-reloc-1 and report-reloc-1-x32.
2021-01-06RISC-V: Implement support for big endian targets.Marcus Comstedt6-0/+12
RISC-V instruction/code is always little endian, but data might be big-endian. Therefore, we can not use the original bfd_get/bfd_put to get/put the code for big endian targets. Add new riscv_get_insn and riscv_put_insn to always get/put code as little endian can resolve the problem. Just remember to update them once we have supported the 48-bit/128-bit instructions in the future patches. bfd/ * config.bfd: Added targets riscv64be*-*-*, riscv32be*-*-* and riscvbe*-*-*. Also added riscv_elf[32|64]_be_vec. * configure.ac: Handle riscv_elf[32|64]_be_vec. * configure: Regenerate. * elfnn-riscv.c: Include <limits.h> and define CHAR_BIT for riscv_is_insn_reloc. (riscv_get_insn): RISC-V instructions are always little endian, but bfd_get may be used for big-endian, so add new riscv_get_insn to handle the insturctions. (riscv_put_insn): Likewsie. (riscv_is_insn_reloc): Check if we are relocaing an instruction. (perform_relocation): Call riscv_is_insn_reloc to decide if we should use riscv_[get|put]_insn or bfd_[get|put]. (riscv_zero_pcrel_hi_reloc): Use riscv_[get|put]_insn, bfd_[get|put]l32 or bfd_[get|put]l16 for code. (riscv_elf_relocate_section): Likewise. (riscv_elf_finish_dynamic_symbol): Likewise. (riscv_elf_finish_dynamic_sections): Likewise. (_bfd_riscv_relax_call): Likewise. (_bfd_riscv_relax_lui): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_pc): Likewise. (riscv_elf_object_p): Handled for big endian. (TARGET_BIG_SYM, TARGET_BIG_NAME): Defined. * targets.c: Add riscv_elf[32|64]_be_vec. (_bfd_target_vector): Likewise. gas/ * config/tc-riscv.c (riscv_target_format): Add elf64-bigriscv and elf32-bigriscv. (install_insn): Always write instructions as little endian. (riscv_make_nops): Likewise. (md_convert_frag_branch): Likewise. (md_number_to_chars): Write data in target endianness. (options, md_longopts): Add -mbig-endian and -mlittle-endian options. (md_parse_option): Handle the endian options. * config/tc-riscv.h: Only define TARGET_BYTES_BIG_ENDIAN if not already defined. * configure.tgt: Added riscv64be*, riscv32be*, riscvbe*. ld/ * configure.tgt: Added riscvbe-*-*, riscv32be*-*-*, riscv64be*-*-*, riscv32be*-*-linux*, and riscv64be*-*-linux*. * Makefile.am: Added eelf32briscv.c, eelf32briscv_ilp32f.c and eelf32briscv_ilp32.c. * Makefile.in: Regenerate. * emulparams/elf32briscv.sh: Added. * emulparams/elf32briscv_ilp32.sh: Likewise. * emulparams/elf32briscv_ilp32f.sh: Likewise. * emulparams/elf64briscv.sh: Likewise. * emulparams/elf64briscv_lp64.sh: Likewise. * emulparams/elf64briscv_lp64f.sh: Likewise.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-12-23x86-64: Add Intel LAM property supportH.J. Lu3-7/+77
Add Intel Linear Address Masking (LAM) property support. LAM modifies the checking that is applied to 64-bit linear addresses, allowing software to use of the untranslated address bits for metadata. bfd/ * elf-linker-x86.h (elf_x86_cet_report): Renamed to ... (elf_x86_prop_report): This. (elf_linker_x86_params): Add lam_u48, lam_u57, lam_u48_report and lam_u57_report. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_LAM_U48 and GNU_PROPERTY_X86_FEATURE_1_LAM_U57. (_bfd_x86_elf_link_fixup_gnu_properties): Keep LAM features only for 64-bit output. binutils/ * NEWS: Mention LAM_U48 and LAM_U57 support. * elfedit.c (elf_x86_feature): Support lam_u48 and lam_u57. (usage): Add lam_u48 and lam_u57. * readelf.c (decode_x86_feature_1): Support LAM_U48 and LAM_U57. * doc/binutils.texi: Update elfedit with lam_u48 and lam_u57 support. * testsuite/binutils-all/x86-64/lam-u48.d: New file. * testsuite/binutils-all/x86-64/lam-u48.s: Likewise. * testsuite/binutils-all/x86-64/lam-u57.d: Likewise. * testsuite/binutils-all/x86-64/lam-u57.s: Likewise. include/ * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_LAM_U48): New. (GNU_PROPERTY_X86_FEATURE_1_LAM_U57): Likewise. ld/ * NEWS: Mention LAM_U48 and LAM_U57 support. * ld.texi: Document LAM_U48 and LAM_U57 support. * emulparams/cet.sh: Updated. * emulparams/elf_x86_64.sh: Source x86-64-lam.sh. * emulparams/x86-64-lam.sh: New file. * testsuite/ld-x86-64/property-x86-lam-u48-1a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-1b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-2.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-3a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-3b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-4.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-5.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48.s: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-1a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-1b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-2.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-3a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-3b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-4.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-5.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57.s: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run LAM tests.
2020-11-27ELF: Support .noinit and .persistent sectionsJozef Lawrynowicz1-13/+5
The ".persistent" section is for data that should be initialized during load, but not during application reset. The ".noinit" section is for data that should not be initialized during load or application reset. Targets utilizing the elf.sc linker script template can define HAVE_{NOINIT,PERSISTENT}=yes to include the .noinit or .persistent output sections in the generated linker script. Targets with existing support for .noinit did not handle unique .noinit.* and .gnu.linkonce.n.* sections the .noinit output section, this patch also fixes that. bfd/ChangeLog: * elf.c (special_sections_g): Add .gnu.linkonce.n and .gnu.linkonce.p. (special_sections_n): Add .noinit. (special_sections_p): Add .persistent. binutils/ChangeLog: * testsuite/lib/binutils-common.exp (supports_noinit_section): New. (supports_persistent_section): New. gas/ChangeLog: * testsuite/gas/elf/elf.exp: Run new tests. * testsuite/gas/elf/section25.d: New test. * testsuite/gas/elf/section25.s: New test. * testsuite/gas/elf/section26.d: New test. * testsuite/gas/elf/section26.s: New test. ld/ChangeLog: * emulparams/armelf.sh (OTHER_SECTIONS): Remove .noinit section definition. Define HAVE_{NOINIT,PERSISTENT}=yes. * scripttempl/avr.sc (.noinit): Add .noinit.* and .gnu.linkonce.n.* input section wildcard patterns. * scripttempl/elf.sc: Define .noinit and .persistent sections when HAVE_NOINIT or HAVE_PERSISTENT are defined to "yes". * scripttempl/elf32msp430.sc (.noinit): Add .noinit.* and .gnu.linkonce.n.*. input section wildcard patterns. (.persistent): Add .persistent.* and .gnu.linkonce.p.*. input section wildcard patterns. * scripttempl/elfarcv2.sc (.noinit): Add .noinit.* and .gnu.linkonce.n.*. input section wildcard patterns. * scripttempl/pru.sc: Likewise. * testsuite/ld-elf/noinit-sections-1.d: New test. * testsuite/ld-elf/noinit-sections-2.d: New test. * testsuite/ld-elf/noinit-sections-2.l: New test. * testsuite/ld-elf/noinit-sections.s: New test. * testsuite/ld-elf/persistent-sections-1.d: New test. * testsuite/ld-elf/persistent-sections-2.d: New test. * testsuite/ld-elf/persistent-sections-2.l: New test. * testsuite/ld-elf/persistent-sections.s: New test.
2020-11-03Fix compile time warningNick Clifton1-1/+1
generated by cgit v1.1 at 2024-08-06 22:56:41 +0000