aboutsummaryrefslogtreecommitdiff
path: root/ld/emulparams
AgeCommit message (Collapse)AuthorFilesLines
2019-08-16[ld] [arm] Add support for noinit sectionChristophe Lyon1-1/+13
2019-08-16 Christophe Lyon <christophe.lyon@linaro.org> * emulparams/armelf.sh (OTHER_SECTIONS): Add support for noinit section. Change-Id: Ib293f28cc5f21e9e9a13abf4d4e37f0a0eec41c0
2019-08-09Add support for a MIPS specific .MIPS.xhash section.Mihailo Stojanovic3-0/+3
This patch is a reimplementation of [1] which was submitted in 2015 by Neil Schellenberger. Copyright issue was sorted out [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (DT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering on the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word (ngnusyms) which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS-specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue as reported in [3], which is caused by the leading word added to the .MIPS.xhash section. Leading word is removed in this patch, and the number of entries in the translation table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is addressed by the corresponding glibc patch). Suggestions on coding style in [4] were taken into account. Existing GNU hash testcase was covered, and another one was added in the MIPS part of the testsuite. The other major change is reserving MIPS ABI version 5 for .MIPS.xhash, marking the need of support for .MIPS.xhash in the dynamic linker (again, addressed in the corresponding glibc patch). This is something which I am not sure of, especially after reading [5]. I am confused on whether this ABI version is reserved for IFUNC, or it can be used for this purpose. Already mentioned glibc patch is submitted at: https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html [4] https://sourceware.org/ml/binutils/2016-02/msg00097.html [5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section. * emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section. * emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section. * emultempl/mipself.em: Remove mips_after_parse function. * testsuite/ld-elf/hash.d: Update comment. * testsuite/ld-mips-elf/hash1.d: New test. * testsuite/ld-mips-elf/hash1.s: Ditto. * testsuite/ld-mips-elf/hash1a.d: Remove. * testsuite/ld-mips-elf/hash1b.d: Ditto. * testsuite/ld-mips-elf/hash1c.d: Ditto * testsuite/ld-mips-elf/hash2.d: New test. * testsuite/ld-mips-elf/mips-elf.exp: New tests. * testsuite/ld-mips-elf/start.s: New test. bfd * elf-bfd.h (struct elf_backend_data): New members. * elflink.c (_bfd_elf_link_create_dynamic_sections): Create .gnu.hash section if necessary. (struct collect_gnu_hash_codes): New member. (elf_gnu_hash_process_symidx): New function name. (elf_renumber_gnu_hash_syms): Ignore local and undefined symbols. Record xlat location for every symbol which should have a .MIPS.xhash entry. (bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to dynamic section if necessary. (GNU_HASH_SECTION_NAME): New define. (bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section. Update the section size info. * elfxx-mips.c (struct mips_elf_hash_sort_data): New members. (struct mips_elf_link_hash_entry): New member. (mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation table location. (mips_elf_sort_hash_table): Initialize the pointer to the .MIPS.xhash section. (mips_elf_sort_hash_table_f): Populate the .MIPS.xhash translation table entry with the symbol dynindx. (_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH. (_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section info. (_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash section. (_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to dynamic section. (_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH. (_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section sh_link info. (_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag. (MIPS_LIBC_ABI_XHASH): New ABI version enum value. (_bfd_mips_post_process_headers): Mark the ABI version as MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section, but not a .hash section. (_bfd_mips_elf_record_xhash_symbol): New function. Record a position in the translation table, associated with the hash entry. * elfxx-mips.h (literal_reloc_p): Define elf_backend_record_xhash_symbol backend hook. * elfxx-target.h: Initialize elf_backend_record_xhash_symbol backend hook. include * elf/mips.h (SHT_GNU_XHASH): New define. (DT_GNU_XHASH): New define. binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type. (get_mips_section_type_name): Return MI{S_XHASH name string. (dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic info. (process_symbol_table): Initialize the .MIPS.xhash section pointer. Adjust the readelf output to support the new section. (process_object): Set the .MIPS.xhash dynamic info to zero.
2019-08-07ld: use a specific linker script in BPF targetsJose E. Marchesi1-1/+2
This patch makes the elf64bpf emulation to use it's own linker script, based on elf.sc. At the moment, the only change is that the BPF executable doesn't define an entry symbol (BPF programs feature several entry points scattered in several sections.) This is a step towards the goal of generating proper ELF executables that would be loaded by the kernel's libbpf. We are not there yet: BPF "programs" should still be linked with -r. This change removes a warning while linking executables, decreases the number of unsupported tests in the target from 47 to 29, and increases the number of expected passes from 104 to 145. Regtested in x86_64 for all targets. No regressions. ld/ChangeLog: 2019-08-07 Jose E. Marchesi <jose.marchesi@oracle.com> * scripttempl/elf64bpf.sc: Adapted from elf.sc. * emulparams/elf64bpf.sh (SCRIPT_NAME): Use elf64bpf. (EMBEDDED): Define. * testsuite/ld-bpf/call-1.d: Do not expect a warning regarding an undefined entry symbol. * testsuite/ld-bpf/jump-1.d: Likewise. * testsuite/ld-undefined/undefined.exp: Do not pass '-e entry' to ld in BPF targets, and do not expect line number information. * testsuite/ld-srec/srec.exp (run_srec_test): xfail s-record tests in BPF targets.
2019-05-30s12z genelf.emAlan Modra1-1/+2
This changes s12z to use generic.em and genelf.em, which is more suited to targets that use the generic linker hash table. A tweak or two to some testsuite predicates then gives a clean testsuite result on the target. PR 24596 binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_unique): Add s12z to targets not supporting this feature. ld/ * emulparams/m9s12zelf.sh (TEMPLATE_NAME): Set to generic. (EXTRA_EM_FILE): Define to genelf. * testsuite/lib/ld-lib.exp (uses_genelf): Add s12z.
2019-05-23ld: add support for eBPFJose E. Marchesi1-0/+10
This patch adds support to the linker for the Linux eBPF architecture. A minimal testsuite is included. ld/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf64bpf.c. * Makefile.in (prefix): Regenerate. * configure.tgt (targ_extra_ofiles): Add case for bpf-*-* targets. * emulparams/elf64bpf.sh: New file. * testsuite/lib/ld-lib.exp (check_gc_sections_available): Add bpf-*-* to the list of targets not supporting gc-sections. * testsuite/ld-bpf/bar.s: New file. * testsuite/ld-bpf/jump-1.d: Likewise. * testsuite/ld-bpf/foo.s: Likewise. * testsuite/ld-bpf/call-1.d: Likewise. * testsuite/ld-bpf/bpf.exp: Likewise. * testsuite/ld-bpf/baz.s: Likewise.
2019-04-13Automatic makefile dependencies for generated ld/e*.cAlan Modra148-212/+212
This patch modifies genscripts.sh to emit dependency info along with the generated emulation e*.c files. This is done by a new source_sh function that records its arg to a file (.deps/e*.Tc), using the function whenever a shell script is sourced. Entries in the file are made unique and written to .deps/e*.Pc. These files are then included by the Makefile. * Makefile.am (GENSCRIPTS): Pass LIB_PATH as a parameter. Add DEPDIR parameter. (ELF_DEPS, ELF_GEN_DEPS, ELF_X86_DEPS): Delete. (ALL_EMULATION_SOURCES, ALL_64_EMULATION_SOURCES): Depend on $GEN_DEPENDS. (e*.c): Delete all dependencies, instead include dependencies from $DEPDIR/*.Pc. * Makefile.in: Regenerate. * configure.ac (source_sh): Define and use function. * configure: Regenerate. * emulparams/aarch64cloudabib.sh, * emulparams/aarch64elf32b.sh, * emulparams/aarch64elfb.sh, * emulparams/aarch64fbsdb.sh, * emulparams/aarch64linux32b.sh, * emulparams/aarch64linuxb.sh, * emulparams/arcelf.sh, * emulparams/arcelf_prof.sh, * emulparams/arclinux.sh, * emulparams/arclinux_nps.sh, * emulparams/arclinux_prof.sh, * emulparams/arcv2elf.sh, * emulparams/arcv2elfx.sh, * emulparams/armelf_fbsd.sh, * emulparams/armelf_linux_eabi.sh, * emulparams/armelf_linux_fdpiceabi.sh, * emulparams/armelf_nacl.sh, * emulparams/armelf_nbsd.sh, * emulparams/armelf_vxworks.sh, * emulparams/armelfb.sh, * emulparams/armelfb_fbsd.sh, * emulparams/armelfb_fuchsia.sh, * emulparams/armelfb_linux.sh, * emulparams/armelfb_linux_eabi.sh, * emulparams/armelfb_linux_fdpiceabi.sh, * emulparams/armelfb_nacl.sh, * emulparams/armelfb_nbsd.sh, * emulparams/armsymbian.sh, * emulparams/cskyelf_linux.sh, * emulparams/elf32_sparc_sol2.sh, * emulparams/elf32_sparc_vxworks.sh, * emulparams/elf32_tic6x_be.sh, * emulparams/elf32_tic6x_elf_be.sh, * emulparams/elf32_tic6x_elf_le.sh, * emulparams/elf32_tic6x_linux_be.sh, * emulparams/elf32_tic6x_linux_le.sh, * emulparams/elf32_x86_64.sh, * emulparams/elf32_x86_64_nacl.sh, * emulparams/elf32b4300.sh, * emulparams/elf32bfinfd.sh, * emulparams/elf32bmipn32.sh, * emulparams/elf32bsmip.sh, * emulparams/elf32btsmip.sh, * emulparams/elf32btsmip_fbsd.sh, * emulparams/elf32btsmipn32.sh, * emulparams/elf32btsmipn32_fbsd.sh, * emulparams/elf32ebmip.sh, * emulparams/elf32ebmipvxworks.sh, * emulparams/elf32elmip.sh, * emulparams/elf32elmipvxworks.sh, * emulparams/elf32frvfd.sh, * emulparams/elf32l4300.sh, * emulparams/elf32lm32fd.sh, * emulparams/elf32lmip.sh, * emulparams/elf32lppc.sh, * emulparams/elf32lppclinux.sh, * emulparams/elf32lppcnto.sh, * emulparams/elf32lppcsim.sh, * emulparams/elf32lr5900.sh, * emulparams/elf32lr5900n32.sh, * emulparams/elf32lriscv.sh, * emulparams/elf32lriscv_ilp32.sh, * emulparams/elf32lriscv_ilp32f.sh, * emulparams/elf32lsmip.sh, * emulparams/elf32ltsmip.sh, * emulparams/elf32ltsmip_fbsd.sh, * emulparams/elf32ltsmipn32.sh, * emulparams/elf32ltsmipn32_fbsd.sh, * emulparams/elf32microblazeel.sh, * emulparams/elf32or1k_linux.sh, * emulparams/elf32ppc.sh, * emulparams/elf32ppc_fbsd.sh, * emulparams/elf32ppccommon.sh, * emulparams/elf32ppclinux.sh, * emulparams/elf32ppcnto.sh, * emulparams/elf32ppcsim.sh, * emulparams/elf32ppcvxworks.sh, * emulparams/elf32ppcwindiss.sh, * emulparams/elf32tilegx_be.sh, * emulparams/elf64_ia64_fbsd.sh, * emulparams/elf64_sparc_fbsd.sh, * emulparams/elf64_sparc_sol2.sh, * emulparams/elf64alpha_fbsd.sh, * emulparams/elf64alpha_nbsd.sh, * emulparams/elf64bmip-defs.sh, * emulparams/elf64bmip.sh, * emulparams/elf64btsmip.sh, * emulparams/elf64btsmip_fbsd.sh, * emulparams/elf64lppc.sh, * emulparams/elf64lriscv-defs.sh, * emulparams/elf64lriscv.sh, * emulparams/elf64lriscv_lp64.sh, * emulparams/elf64lriscv_lp64f.sh, * emulparams/elf64ltsmip.sh, * emulparams/elf64ltsmip_fbsd.sh, * emulparams/elf64ppc.sh, * emulparams/elf64ppc_fbsd.sh, * emulparams/elf64rdos.sh, * emulparams/elf64tilegx_be.sh, * emulparams/elf_i386.sh, * emulparams/elf_i386_be.sh, * emulparams/elf_i386_fbsd.sh, * emulparams/elf_i386_ldso.sh, * emulparams/elf_i386_nacl.sh, * emulparams/elf_i386_sol2.sh, * emulparams/elf_i386_vxworks.sh, * emulparams/elf_iamcu.sh, * emulparams/elf_k1om.sh, * emulparams/elf_k1om_fbsd.sh, * emulparams/elf_l1om.sh, * emulparams/elf_l1om_fbsd.sh, * emulparams/elf_x86_64.sh, * emulparams/elf_x86_64_cloudabi.sh, * emulparams/elf_x86_64_fbsd.sh, * emulparams/elf_x86_64_nacl.sh, * emulparams/elf_x86_64_sol2.sh, * emulparams/h8300helf.sh, * emulparams/h8300helf_linux.sh, * emulparams/h8300hnelf.sh, * emulparams/h8300self.sh, * emulparams/h8300self_linux.sh, * emulparams/h8300snelf.sh, * emulparams/h8300sxelf.sh, * emulparams/h8300sxelf_linux.sh, * emulparams/h8300sxnelf.sh, * emulparams/hppanbsd.sh, * emulparams/hppaobsd.sh, * emulparams/m32rlelf.sh, * emulparams/m32rlelf_linux.sh, * emulparams/m68kelfnbsd.sh, * emulparams/mn10300.sh, * emulparams/msp430X.sh, * emulparams/nds32belf.sh, * emulparams/nds32belf16m.sh, * emulparams/nds32belf_linux.sh, * emulparams/pjlelf.sh, * emulparams/ppclynx.sh, * emulparams/score7_elf.sh, * emulparams/shelf_fd.sh, * emulparams/shelf_linux.sh, * emulparams/shelf_nbsd.sh, * emulparams/shelf_uclinux.sh, * emulparams/shelf_vxworks.sh, * emulparams/shl.sh, * emulparams/shlelf.sh, * emulparams/shlelf_fd.sh, * emulparams/shlelf_nbsd.sh, * emulparams/shlelf_vxworks.sh: Use source_sh. * genscripts.sh: Adjust for changed parameters. Emit dependencies for e*.c to .deps/*.Pc. (source_sh): New function, use it throughout to source scripts. * genscrba.sh (source_em): Use source_sh.
2019-04-11x86: Add -z cet-report=[none|warning|error]H.J. Lu1-0/+19
Add -z cet-report=[none|warning|error] to report the missing Intel Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK) properties in input .note.gnu.property section. -z cet-report=none, which is the default, will make the linker not report missing properties in input files. -z cet-report=warning will make the linker issue a warning for missing properties in input files. -z cet-report=error will make the linker issue an error for missing properties in input files. Note that -z ibt will turn off the missing IBT property report and -z shstk will turn off the missing SHSTK property report. Supported for Linux/i386 and Linux/x86_64. bfd/ * elf-linker-x86.h (elf_x86_cet_report): New. (elf_linker_x86_params): Add cet_report. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Report missing IBT and SHSTK properties if needed. ld/ * ld.texi: Document -z cet-report=[none|warning|error]. * emulparams/cet.sh: Add -z cet-report=[none|warning|error]. * testsuite/ld-i386/i386.exp: Run -z cet-report=[warning|error] tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-i386/property-x86-cet1.d: New file. * testsuite/ld-i386/property-x86-cet2a.d: Likewise. * testsuite/ld-i386/property-x86-cet2b.d: Likewise. * testsuite/ld-i386/property-x86-cet3a.d: Likewise. * testsuite/ld-i386/property-x86-cet3b.d: Likewise. * testsuite/ld-i386/property-x86-cet4a.d: Likewise. * testsuite/ld-i386/property-x86-cet4b.d: Likewise. * testsuite/ld-i386/property-x86-cet5a.d: Likewise. * testsuite/ld-i386/property-x86-cet5b.d: Likewise. * testsuite/ld-i386/property-x86-cet6.d: Likewise. * testsuite/ld-x86-64/property-x86-cet.s: Likewise. * testsuite/ld-x86-64/property-x86-cet1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2b.d: Likewise. * testsuite/ld-x86-64/property-x86-cet3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet3a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet3b.d: Likewise. * testsuite/ld-x86-64/property-x86-cet4a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet4a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet4b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet4b.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b.d: Likewise. * testsuite/ld-x86-64/property-x86-cet6-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet6.d: Likewise.
2019-04-10Fix some ld dependenciesAlan Modra5-58/+11
In looking at the csky-elf vs. csky-linux differences, the first thing I compared was csky_elf.sh and cskyelf_linux.sh. Those files are mostly the same but besides the real differences, annoyingly have some lines ordered differently. It's better in such cases to have one file source the other, making differences plain. This patch does that for csky and microblaze, removes an unused variable defined in a few places, and fixes ld makefile dependencies. * Makefile.am (eskyelf.c, eskyelf_linux.c): Depend on cskyelf.em. (ecskyelf_linux.c): Depend on cskyelf.sh. (eelf32microblazeel.c): Depend on elf32microblaze.sh. * Makefile.in: Regenerate. * emulparams/cskyelf.sh: Comment regarding cskelf_linux.sh. (PAGE_SIZE): Don't define. * emulparams/cskyelf_linux.sh: Source sckyelf.sh, leaving just the differing variable defs/undefs. * emulparams/elf32mcore.sh (PAGE_SIZE): Don't define. * emulparams/elf32microblaze.sh: Comment re. elf32microblazeel.sh. (OUTPUT_FORMAT): Use BIG_OUTPUT_FORMAT. (PAGE_SIZE): Don't define. * emulparams/elf32microblazeel.sh: Source elf32microblaze.sh, leaving just the differing OUTPUT_FORMAT.
2019-04-08x86: Remove i386-*-kaos* and i386-*-chaos targetsH.J. Lu1-15/+0
Remove i386-*-kaos* and i386-*-chaos targets since they are no longer supported by config.sub: $ .../config.sub i386-kaos Invalid configuration `i386-kaos': system `kaos' not recognized $ .../config.sub i386-chaos Invalid configuration `i386-chaos': system `chaos' not recognized $ bfd/ * config.bfd: Remove i[3-7]86-*-kaos* and i[3-7]86-*-chaos targets. gas/ * configure.tgt: Remove i386-*-kaos* and i386-*-chaos targets. * testsuite/gas/i386/i386.exp: Remove *-*-caos* and "*-*-kaos* check. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove eelf_i386_chaos.c. (eelf_i386_chaos.c): Removed. * Makefile.in: Regenerated. * configure.tgt: Remove i[3-7]86-*-kaos*. * emulparams/elf_i386_chaos.sh: Removed.
2019-04-08Use elf-x86.em for i386-moss and i386-beosH.J. Lu2-0/+2
* emulparams/elf_i386_be.sh (EXTRA_EM_FILE): New. * emulparams/i386moss.sh (EXTRA_EM_FILE): Likewise.
2019-04-08Fix i386-lynxos and other runtime linker failsAlan Modra3-0/+3
Segfaults due to htab->params being NULL. * emulparams/elf64rdos.sh (EXTRA_EM_FILE): Define. * emulparams/i386lynx.sh (EXTRA_EM_FILE): Define. * emulparams/i386nto.sh (EXTRA_EM_FILE): Define.
2019-04-06x86: Move x86-specific linker options to elf_linker_x86_paramsH.J. Lu15-15/+25
Remove x86-specific linker options from bfd_link_info and put them in elf_linker_x86_params. Add _bfd_elf_linker_x86_set_options to pass x86-specific linker options from ld to bfd. bfd/ * elf-linker-x86.h: New file. * elf32-i386.c (elf_i386_convert_load_reloc): Use htab->params to get x86-specific linker options. * elf64-x86-64.c (elf_x86_64_convert_load_reloc): Likewise. (elf_x86_64_check_relocs): Likewise. (elf_x86_64_relocate_section): Likewise. (elf_x86_64_link_setup_gnu_properties): Likewise. * elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Likewise. (_bfd_x86_elf_link_setup_gnu_properties): Likewise. (_bfd_elf_linker_x86_set_options): New function. * elfxx-x86.h: Include "elf-linker-x86.h". (elf_x86_link_hash_table): Add params. include/ * bfdlink.h (bfd_link_info): Remove x86-specific linker options. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emultempl/elf-x86.em. (eelf_i386_sol2.c): Also depend on $(srcdir)/emultempl/solaris2-x86.em. (eelf_x86_64_sol2.c): Likewise. * Makefile.in: Regenerated. * emulparams/call_nop.sh: Set x86-specific linker options via params. * emulparams/cet.sh: Likewise. * emulparams/reloc_overflow.sh: Likewise. * emulparams/elf32_x86_64.sh (EXTRA_EM_FILE): New. Set to "elf-x86". * emulparams/elf_i386.sh: Likewise. * emulparams/elf_i386_be.sh: Likewise. * emulparams/elf_i386_chaos.sh: Likewise. * emulparams/elf_i386_ldso.sh: Likewise. * emulparams/elf_i386_vxworks.sh: Likewise. * emulparams/elf_iamcu.sh: Likewise. * emulparams/elf_k1om.sh: Likewise. * emulparams/elf_l1om.sh: Likewise. * emulparams/elf_x86_64.sh: Likewise. * emulparams/elf_i386_sol2.sh (EXTRA_EM_FILE): Changed to "solaris2-x86". * emulparams/elf_x86_64_sol2.sh: Likewise. * emultempl/elf-x86.em: New file. * emultempl/solaris2-x86.em: Likewise. * emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Don't set link_info.call_nop_byte.
2019-03-21lm32-linux ld testsuite failsAlan Modra1-0/+1
A number of the fails are due to ld supporting the creation of shared libraries but not allowing linking against them without using an option like -Bdynamic. FAIL: Symbol export class test (final shared object) FAIL: PROVIDE_HIDDEN test 4 FAIL: PROVIDE_HIDDEN test 6 FAIL: PROVIDE_HIDDEN test 10 FAIL: PROVIDE_HIDDEN test 12 FAIL: Build pr22471b.so FAIL: Build pr22649-2b.so FAIL: Build pr22649-2d.so FAIL: PR ld/20828 dynamic symbols with section GC (plain) FAIL: PR ld/20828 dynamic symbols with section GC (version script) FAIL: PR ld/20828 dynamic symbols with section GC (versioned) FAIL: PR ld/21233 dynamic symbols with section GC (--undefined) FAIL: PR ld/21233 dynamic symbols with section GC (--require-defined) FAIL: PR ld/21233 dynamic symbols with section GC (EXTERN) FAIL: Build pr22150 FAIL: PR ld/14170 FAIL: Link using broken linker script FAIL: pr17068 link --as-needed lib in group FAIL: ld-gc/pr20022 * emulparams/elf32lm32fd.sh (DYNAMIC_LINK): Undef.
2019-03-01Revert "Add support to GNU ld to separate got related plt entries"Andreas Krebbel2-2/+0
bfd/ChangeLog: 2019-03-01 Andreas Krebbel <krebbel@linux.ibm.com> This reverts commit 5a12586d44fa8d5dfc74cbca4f2f36a273a16335. 2019-01-14 Maamoun Tarsha <maamountk@hotmail.com> PR 20113 * elf32-s390.c (allocate_dynrelocs): Update comment. ld/ChangeLog: 2019-03-01 Andreas Krebbel <krebbel@linux.ibm.com> This reverts commit 5a12586d44fa8d5dfc74cbca4f2f36a273a16335. 2019-01-14 Maamoun Tarsha <maamountk@hotmail.com> PR 20113 * emulparams/elf64_s390.sh (SEPARATE_GOTPLT): Define. * emulparams/elf_s390.sh (SEPARATE_GOTPLT): Define. * testsuite/ld-s390/gotreloc_31-1.dd: Update expected output. * testsuite/ld-s390/tlsbin.dd: Likewise. * testsuite/ld-s390/tlsbin.rd: Likewise. * testsuite/ld-s390/tlsbin.sd: Likewise. * testsuite/ld-s390/tlsbin_64.dd: Likewise. * testsuite/ld-s390/tlsbin_64.rd: Likewise. * testsuite/ld-s390/tlsbin_64.sd: Likewise. * testsuite/ld-s390/tlspic.dd: Likewise. * testsuite/ld-s390/tlspic.rd: Likewise. * testsuite/ld-s390/tlspic.sd: Likewise. * testsuite/ld-s390/tlspic_64.dd: Likewise. * testsuite/ld-s390/tlspic_64.rd: Likewise. * testsuite/ld-s390/tlspic_64.sd: Likewise. * testsuite/ld-s390/s390.exp: Skip s390 tests for tpf targets.
2019-01-14Add support to GNU ld to separate got related plt entries from normal ones ↵Maamoun Tarsha2-0/+2
in order to be able to switch the non-plt got entries to read-only after startup, conforming to revised Linux for zSeries ABI. PR 20133 * emulparams/elf64_s390.sh (SEPARATE_GOTPLT): Define. * emulparams/elf_s390.sh (SEPARATE_GOTPLT): Define. * testsuite/ld-s390/gotreloc_31-1.dd: Update expected output. * testsuite/ld-s390/tlsbin.dd: Likewise. * testsuite/ld-s390/tlsbin.rd: Likewise. * testsuite/ld-s390/tlsbin.sd: Likewise. * testsuite/ld-s390/tlsbin_64.dd: Likewise. * testsuite/ld-s390/tlsbin_64.rd: Likewise. * testsuite/ld-s390/tlsbin_64.sd: Likewise. * testsuite/ld-s390/tlspic.dd: Likewise. * testsuite/ld-s390/tlspic.rd: Likewise. * testsuite/ld-s390/tlspic.sd: Likewise. * testsuite/ld-s390/tlspic_64.dd: Likewise. * testsuite/ld-s390/tlspic_64.rd: Likewise. * testsuite/ld-s390/tlspic_64.sd: Likewise. * testsuite/ld-s390/s390.exp: Skip s390 tests for tpf targets.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-10-15RISC-V: Adjust __global_pointer$ value to reduce code size.Jim Wilson1-1/+12
ld/ * emulparams/elf32lriscv-defs.sh (DATA_START_SYMBOLS): New. (SDATA_START_SYMBOLS): Define __SDATA_BEGIN__. Don't define __global_pointer$. (OTHER_END_SYMBOLS): New. Define __global_pointer$. * testsuite/ld-riscv-elf/pcrel-lo-addend-2.d (#ld): Add --no-relax.
2018-10-13ELF ld -r scriptsAlan Modra15-28/+33
"ld -r" generally should not combine object file sections with different names. For example, "ld -r" should not combine ".text", ".text.hot" and ".text.cold" into an output ".text" section. An exception needs to be made for linker created sections, for example, branch trampoline sections that might be created even for ld -r. "ld -r" also should not define symbols in linker scripts. Any definitions are likely to conflict with those defined at final link. A MEMORY spec is also not needed for ld -r. * Makefile.am (eelf32btsmip_fbsd.c, eelf32btsmipn32_fbsd.c), (eelf32epiphany.c, eelf32epiphany_4x4.c, eelf32ltsmip_fbsd.c), (eelf32ltsmipn32_fbsd.c, eelf32xc16x.c, eelf32xc16xl.c), (eelf32xc16xs.c, emcorepe.c, enios2elf.c, enios2linux.c), (eelf64btsmip_fbsd.c, eelf64ltsmip_fbsd.c): Correct dependencies. * Makefile.in: Regenerate. * emulparams/aarch64cloudabi.sh, * emulparams/aarch64fbsd.sh, * emulparams/aarch64linux.sh, * emulparams/aarch64linux32.sh, * emulparams/arc-nps.sh, * emulparams/elf32_spu.sh, * emulparams/elf32_tic6x_le.sh, * emulparams/elf32bmip.sh, * emulparams/elf32btsmipn32.sh, * emulparams/elf32lr5900n32.sh, * emulparams/elf32mep.sh, * emulparams/elf32metag.sh, * emulparams/elf64btsmip.sh, * emulparams/shelf_vxworks.sh, * emulparams/shlelf_fd.sh, * scripttempl/DWARF.sc, * scripttempl/alpha.sc, * scripttempl/alphavms.sc, * scripttempl/arclinux.sc, * scripttempl/armbpabi.sc, * scripttempl/avr.sc, * scripttempl/dlx.sc, * scripttempl/elf.sc, * scripttempl/elf32cr16.sc, * scripttempl/elf32cr16c.sc, * scripttempl/elf32crx.sc, * scripttempl/elf32msp430.sc, * scripttempl/elf32msp430_3.sc, * scripttempl/elf32xc16x.sc, * scripttempl/elf32xc16xl.sc, * scripttempl/elf32xc16xs.sc, * scripttempl/elf64hppa.sc, * scripttempl/elf_chaos.sc, * scripttempl/elfarc.sc, * scripttempl/elfarcv2.sc, * scripttempl/elfd10v.sc, * scripttempl/elfd30v.sc, * scripttempl/elfm68hc11.sc, * scripttempl/elfm68hc12.sc, * scripttempl/elfm9s12z.sc, * scripttempl/elfmicroblaze.sc, * scripttempl/elfxgate.sc, * scripttempl/elfxtensa.sc, * scripttempl/epiphany_4x4.sc, * scripttempl/ft32.sc, * scripttempl/hppaelf.sc, * scripttempl/ia64vms.sc, * scripttempl/ip2k.sc, * scripttempl/iq2000.sc, * scripttempl/mep.sc, * scripttempl/mmo.sc, * scripttempl/nds32elf.sc, * scripttempl/pru.sc, * scripttempl/sh.sc, * scripttempl/v850.sc, * scripttempl/v850_rh850.sc, * scripttempl/visium.sc, * scripttempl/xstormy16.sc: Condition various parts of scripts on ${RELOCATABLE} in order to prevent ld -r merging sections or defining symbols. Remove MEMORY and VERSION definitions from ld -r scripts too. * testsuite/ld-elf/group2.d, * testsuite/ld-elf/group4.d, * testsuite/ld-elf/group5.d, * testsuite/ld-elf/group6.d, * testsuite/ld-elf/group7.d, * testsuite/ld-elf/group8a.d, * testsuite/ld-elf/group8b.d, * testsuite/ld-elf/group9a.d, * testsuite/ld-elf/group9b.d, * testsuite/ld-elf/pr17550a.d, * testsuite/ld-elf/pr17550b.d, * testsuite/ld-elf/pr17550d.d: Don't xfail cr16 and crx. * testsuite/ld-elf/init-fini-arrays.d, * testsuite/ld-elf/pr22677.d: Likewise, and dont' xfail mep.
2018-09-20RISC-V: Fix library search path for rv32.Jim Wilson3-3/+3
2018-09-19 Kito Cheng <kito@andestech.com> ld/ * emulparams/elf32lriscv.sh: Correct the library search path. * emulparams/elf32lriscv_ilp32.sh: Likewise. * emulparams/elf32lriscv_ilp32f.sh: Likewise.
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner2-0/+70
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
2018-07-18S/390: Improve partial relro support for 64 bitAndreas Krebbel1-0/+3
Currently on S/390 the .got.plt always comes first which prevents the GNU_RELRO segment from being extended across the non-plt GOT entries. Just swapping both unfortunately is not that simple since our ABI requires the _GLOBAL_OFFSET_TABLE_ symbol to point to the very beginning of the entire GOT. Of the 3 magic GOT entries the first is accessed via got pointer while second and third are being accessed via DT_PLTGOT. In order to keep them together we make DT_PLTGOT to point to the .got instead of .got.plt. However, this violates an assumption in the dynamic linker prelink undo code about the GOTPLT entries starting at DT_PLTGOT + 3. We got rid of this requirement with a Glibc patch already in version 2.24: https://sourceware.org/ml/libc-alpha/2016-06/msg01302.html So the S/390 relro GOT layout will look like this with this patch: +----------------------------------+ |got[0]: DYNAMIC | <--- _GLOBAL_OFFSET_TABLE_ == DT_PLTGOT .got |got[1]: link_map parm | |got[2]: &_dl_runtime_resolve | +----------------------------------+ | | non-plt GOT entries | | | | +----------------------------------+ | | <--- .gotplt, PLT GOT entries | | | | | | +----------------------------------+ The patch detects the current layout in size_dynamic_section in order to deal also with linker scripts not generated by this ld version. With partial relro enabled we pick a linker script where .got and .got.plt are swapped which then triggers the rest of the logic. ld/ChangeLog: 2018-07-18 Andreas Krebbel <krebbel@linux.ibm.com> * emulparams/elf64_s390.sh: Define GENERATE_RELRO_SCRIPT and SEPARATE_GOTPLT. * testsuite/ld-s390/gotreloc_64-relro-1.dd: New test. * testsuite/ld-s390/gotreloc_64-norelro-1.dd: Renamed from ... * testsuite/ld-s390/gotreloc_64-1.dd: ... this. * testsuite/ld-s390/s390.exp: Split the GOT testcase into two. bfd/ChangeLog: 2018-07-18 Andreas Krebbel <krebbel@linux.ibm.com> * elf-s390-common.c (s390_gotplt_after_got_p): New function. (s390_got_pointer): New function. (s390_got_offset): New function. (s390_gotplt_offset): New function. * elf64-s390.c (allocate_dynrelocs): Adjust comment. (elf_s390_size_dynamic_sections): Move space for magic GOT entries from .got.plt to .got if necessary and pick the right location for _GLOBAL_OFFSET_TABLE_. (elf_s390_relocate_section): Use the wrapper functions from elf-s390-common.c to deal with both possible layouts (either .got or .got.plt first). (elf_s390_finish_dynamic_sections): Likewise. (elf_s390_finish_dynamic_symbol): Make the location of the GOT magic entries conditional.
2018-07-10xgate cleanupAlan Modra1-2/+2
elf32-xgate.c contains many functions that are only stubs and elf32-xgate.h contains unused declarations. While this might be reasonable for the initial commit of a port with subsequent work fleshing out the stubs, xgate has only had two minor target specific patches since the initial commit over six years ago. The rest of the changes have been general maintenance work applied to all ELF targets, and some of this work could have been avoided if the stubs hadn't been there. So this patch removes all the stubs. I've kept the functionality of the old elf32_xgate_add_symbol_hook, implemented in elf32_xgate_backend_symbol_processing. Presumably, that's to set the symbol st_target_internal flag for use in elf32-m68hc1x.c:elf32_m68hc11_relocate_section. The empty elf32_xgate_relocate_section meant that xgate had no linker. Or at least, no linker relocation processing. Deleting the elf_backend_relocate_section define means the target will now use the generic linker reloc processing. How good that is will depend on the accuracy of the reloc howtos.. I haven't updated the ld testsuite to xfail tests expected to fail for generic elf targets. bfd/ * elf32-xgate.h: Delete. * elf32-xgate.c: Delete unnecessary forward declarations, add two that are now needed. (xgate_elf_bfd_link_hash_table_create) (xgate_elf_bfd_link_hash_table_free) (xgate_elf_set_mach_from_flags, struct xgate_scan_param) (stub_hash_newfunc, elf32_xgate_add_symbol_hook) (elf32_xgate_setup_section_lists, elf32_xgate_size_stubs) (elf32_xgate_build_stubs, elf32_xgate_check_relocs) (elf32_xgate_relocate_section, _bfd_xgate_elf_set_private_flags) (elf32_xgate_post_process_headers): Delete. (elf32_xgate_backend_symbol_processing): New function. (xgate_elf_ignore_reloc, xgate_elf_special_reloc) (_bfd_xgate_elf_print_private_bfd_data): Make static. (ELF_TARGET_ID, elf_info_to_howto, elf_backend_check_relocs) (elf_backend_relocate_section, elf_backend_object_p) (elf_backend_final_write_processing, elf_backend_can_gc_sections) (elf_backend_post_process_headers, elf_backend_add_symbol_hook) (bfd_elf32_bfd_link_hash_table_create) (bfd_elf32_bfd_set_private_flags) (xgate_stub_hash_lookup): Don't define. (elf_backend_symbol_processing): Define. * elf-bfd.h (elf_target_id): Delete XGATE_ELF_DATA. ld/ * emulparams/xgateelf.sh (TEMPLATE_NAME) Set to generic. (EXTRA_EM_FILE): Set to genelf.
2018-06-12Fix syntax error in AArch64 default linker scripts when invoked with -shared.Nick Clifton1-1/+1
* emulparams/aarch64elf.sh (OTHER_BSS_END_SYMBOLS): Make the definition of the __bss_end__ symbol conditional upon CREATE_SHLIB.
2018-06-08Define various symbols conditionally in shared librariesAlan Modra22-83/+66
The values of symbols in shared libraries like _end, _edata, and __bss_start are generally not that useful outside of the shared library. This patch defines them conditionally with PROVIDE, since a shared library might need the local value. An example is glibc ld.so local access to "_begin", "_etext" and "_end". (ld.so gains access to the local values by making the references using hidden visibility. That makes the definitions hidden too.) We can't use PROVIDE_HIDDEN in the linker scripts because the shared library might need the value of the symbol in the executable. An example is freebsd libc dynamic access to "_end". PR ld/23161 * emulparams/aarch64cloudabi.sh: PROVIDE __bss_start__, _bss_end__, and __end__ in shared libraries. * emulparams/aarch64fbsd.sh: Likewise. * emulparams/aarch64linux.sh: Likewise. * emulparams/aarch64linux32.sh: Likewise. * emulparams/armelf_fuchsia.sh: Likewise. * emulparams/armelf_linux.sh: Likewise. * emulparams/armelf_phoenix.sh: Likewise. * emulparams/aarch64elf.sh: Likewise, and __data_start * emulparams/aarch64elf32.sh: Likewise. * emulparams/armelf.sh: Likewise. * emulparams/armnto.sh: Likewise. * emulparams/elf32bmip.sh: Remove duplicate ". = ." from OTHER_GOT_SYMBOLS. PROVIDE _ftext, _fdata, and _fbss in shared libs. * emulparams/elf32bmipn32-defs.sh: Likewise. * emulparams/elf32frv.sh: PROVIDE __end and __data_start in shared libs. * emulparams/elf32lriscv-defs.sh: Tidy. * emulparams/elf32mcore.sh: PROVIDE __bss_start and _bss_end in shared libs * emulparams/elf32ppccommon.sh: PROVIDE __end in shared libs. * emulparams/elf32rl78.sh: Tidy. * emulparams/i386nto.sh: PROVIDE _btext in shared libs. * emulparams/shelf_nto.sh: Likewise. * emulparams/shlelf_nto.sh: Likewise. * emulparams/score3_elf.sh: PROVIDE _gp, _bss_start__, _bss_end__, __bss_end__, __end__, _fdata, _sdata_begin, and _bss_start in shared libs. * scripttempl/elf.sc: Don't use EXECUTABLE_SYMBOLS for shared libraries. PROVIDE _edata, edata, __bss_start, and _end in shared libraries. * testsuite/ld-elf/pr23161.map, * testsuite/ld-elf/pr23161a.c, * testsuite/ld-elf/pr23161b.c, * testsuite/ld-elf/pr23161c.c, * testsuite/ld-elf/pr23161a.rd, * testsuite/ld-elf/pr23161b.rd, * testsuite/ld-elf/pr23161c.rd, * testsuite/ld-elf/pr23161d.rd: New tests. * testsuite/ld-elf/shared.exp: Run ld/23161 tests. * testsuite/ld-elf/pr23162.rd, * testsuite/ld-aarch64/ifunc-1-local.d, * testsuite/ld-aarch64/ifunc-1.d, * testsuite/ld-aarch64/ifunc-2-local.d, * testsuite/ld-aarch64/ifunc-2.d, * testsuite/ld-aarch64/ifunc-21.d, * testsuite/ld-aarch64/ifunc-3a.d, * testsuite/ld-alpha/tlsbin.rd, * testsuite/ld-alpha/tlsbin.sd, * testsuite/ld-alpha/tlsbinr.rd, * testsuite/ld-alpha/tlspic.rd, * testsuite/ld-alpha/tlspic.sd, * testsuite/ld-cris/dso-pltdis1.d, * testsuite/ld-cris/dso-pltdis2.d, * testsuite/ld-cris/dso12-pltdis.d, * testsuite/ld-cris/gotplt1.d, * testsuite/ld-cris/gotplt2.d, * testsuite/ld-cris/gotplt3.d, * testsuite/ld-cris/hiddef1.d, * testsuite/ld-cris/libdso-1.d, * testsuite/ld-cris/libdso-10.d, * testsuite/ld-cris/libdso-11.d, * testsuite/ld-cris/libdso-12.d, * testsuite/ld-cris/libdso-12b.d, * testsuite/ld-cris/libdso-12c.d, * testsuite/ld-cris/libdso-13.d, * testsuite/ld-cris/libdso-13b.d, * testsuite/ld-cris/libdso-14.d, * testsuite/ld-cris/libdso-15.d, * testsuite/ld-cris/libdso-15b.d, * testsuite/ld-cris/libdso-1c.d, * testsuite/ld-cris/libdso-1d.d, * testsuite/ld-cris/libdso-2.d, * testsuite/ld-cris/pic-gc-72.d, * testsuite/ld-cris/pic-gc-73.d, * testsuite/ld-cris/pr16044.d, * testsuite/ld-cris/pv32-1.d, * testsuite/ld-cris/tls-dso-dtpoffd2.d, * testsuite/ld-cris/tls-dso-dtpoffd4.d, * testsuite/ld-cris/tls-dso-tpoffgotcomm1.d, * testsuite/ld-cris/tls-gc-71.d, * testsuite/ld-cris/tls-gd-1.d, * testsuite/ld-cris/tls-gd-1h.d, * testsuite/ld-cris/tls-gd-2.d, * testsuite/ld-cris/tls-gd-2h.d, * testsuite/ld-cris/tls-ie-10.d, * testsuite/ld-cris/tls-ie-11.d, * testsuite/ld-cris/tls-ie-78.d, * testsuite/ld-cris/tls-ie-8.d, * testsuite/ld-cris/tls-ie-9.d, * testsuite/ld-cris/tls-js1.d, * testsuite/ld-cris/tls-ld-4.d, * testsuite/ld-cris/tls-ld-5.d, * testsuite/ld-cris/tls-ld-6.d, * testsuite/ld-cris/tls-ld-7.d, * testsuite/ld-cris/tls-ldgd-14.d, * testsuite/ld-cris/tls-ldgd-15.d, * testsuite/ld-cris/tls-ldgdex-14.d, * testsuite/ld-cris/tls-ldgdex-15.d, * testsuite/ld-cris/tls-ldgdx-14.d, * testsuite/ld-cris/tls-ldgdx-15.d, * testsuite/ld-cris/tls-legdx-16.d, * testsuite/ld-cris/tls-legdx-17.d, * testsuite/ld-cris/tls-local-54.d, * testsuite/ld-cris/tls-local-60.d, * testsuite/ld-cris/tls-local-61.d, * testsuite/ld-cris/tls-local-63.d, * testsuite/ld-cris/tls-local-64.d, * testsuite/ld-cris/tls-ok-30.d, * testsuite/ld-cris/tls-ok-32.d, * testsuite/ld-cris/tls-ok-34.d, * testsuite/ld-cris/tls-und-38.d, * testsuite/ld-cris/tls-und-42.d, * testsuite/ld-cris/tls-und-46.d, * testsuite/ld-cris/tls-und-50.d, * testsuite/ld-cris/weakhiddso.d, * testsuite/ld-cris/weakref2.d, * testsuite/ld-frv/fdpic-shared-1.d, * testsuite/ld-frv/fdpic-shared-2.d, * testsuite/ld-frv/fdpic-shared-3.d, * testsuite/ld-frv/fdpic-shared-4.d, * testsuite/ld-frv/fdpic-shared-5.d, * testsuite/ld-frv/fdpic-shared-7.d, * testsuite/ld-frv/fdpic-shared-8.d, * testsuite/ld-frv/tls-dynamic-2.d, * testsuite/ld-i386/ibt-plt-1.d, * testsuite/ld-i386/ibt-plt-2a.d, * testsuite/ld-i386/ibt-plt-2b.d, * testsuite/ld-i386/ibt-plt-2c.d, * testsuite/ld-i386/ibt-plt-2d.d, * testsuite/ld-i386/ibt-plt-3a.d, * testsuite/ld-i386/ibt-plt-3b.d, * testsuite/ld-i386/ibt-plt-3c.d, * testsuite/ld-i386/ibt-plt-3d.d, * testsuite/ld-i386/plt2.dd, * testsuite/ld-i386/pr20830.d, * testsuite/ld-i386/tlsbin-nacl.rd, * testsuite/ld-i386/tlsbin.rd, * testsuite/ld-i386/tlsbin2-nacl.rd, * testsuite/ld-i386/tlsbin2.rd, * testsuite/ld-i386/tlsbindesc-nacl.rd, * testsuite/ld-i386/tlsbindesc.rd, * testsuite/ld-i386/tlsdesc-nacl.rd, * testsuite/ld-i386/tlsdesc.rd, * testsuite/ld-i386/tlsgdesc-nacl.rd, * testsuite/ld-i386/tlsgdesc.rd, * testsuite/ld-i386/tlsnopic-nacl.rd, * testsuite/ld-i386/tlsnopic.dd, * testsuite/ld-i386/tlsnopic.rd, * testsuite/ld-i386/tlsnopic.sd, * testsuite/ld-i386/tlspic-nacl.rd, * testsuite/ld-i386/tlspic.rd, * testsuite/ld-i386/tlspic2-nacl.rd, * testsuite/ld-i386/tlspic2.rd, * testsuite/ld-ia64/merge1.d, * testsuite/ld-ia64/merge2.d, * testsuite/ld-ia64/merge3.d, * testsuite/ld-ia64/merge4.d, * testsuite/ld-ia64/merge5.d, * testsuite/ld-ia64/tlsbin.rd, * testsuite/ld-ia64/tlspic.rd, * testsuite/ld-ifunc/ifunc-2-i386-now.d, * testsuite/ld-ifunc/ifunc-2-local-i386-now.d, * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d, * testsuite/ld-ifunc/ifunc-2-local-x86-64.d, * testsuite/ld-ifunc/ifunc-2-x86-64-now.d, * testsuite/ld-ifunc/ifunc-2-x86-64.d, * testsuite/ld-ifunc/pr17154-i386-now.d, * testsuite/ld-ifunc/pr17154-i386.d, * testsuite/ld-ifunc/pr17154-x86-64-now.d, * testsuite/ld-ifunc/pr17154-x86-64.d, * testsuite/ld-m68k/tls-def-1.d, * testsuite/ld-m68k/tls-gd-1.d2, * testsuite/ld-metag/shared.d, * testsuite/ld-metag/stub_pic_app.d, * testsuite/ld-mips-elf/rel32-n32.d, * testsuite/ld-mips-elf/rel32-o32.d, * testsuite/ld-mips-elf/rel64.d, * testsuite/ld-powerpc/ambiguousv1.d, * testsuite/ld-powerpc/ambiguousv1b.d, * testsuite/ld-powerpc/ambiguousv2.d, * testsuite/ld-powerpc/ambiguousv2b.d, * testsuite/ld-powerpc/tlsexe.d, * testsuite/ld-powerpc/tlsexe.r, * testsuite/ld-powerpc/tlsexe32.d, * testsuite/ld-powerpc/tlsexe32.g, * testsuite/ld-powerpc/tlsexe32.r, * testsuite/ld-powerpc/tlsexetoc.d, * testsuite/ld-powerpc/tlsexetoc.r, * testsuite/ld-powerpc/tlsso.d, * testsuite/ld-powerpc/tlsso.r, * testsuite/ld-powerpc/tlsso32.g, * testsuite/ld-powerpc/tlsso32.r, * testsuite/ld-powerpc/tlstocso.d, * testsuite/ld-powerpc/tlstocso.g, * testsuite/ld-powerpc/tlstocso.r, * testsuite/ld-s390/gotreloc_31-1.dd, * testsuite/ld-s390/tlsbin.dd, * testsuite/ld-s390/tlsbin.rd, * testsuite/ld-s390/tlsbin_64.dd, * testsuite/ld-s390/tlsbin_64.rd, * testsuite/ld-s390/tlspic.rd, * testsuite/ld-s390/tlspic_64.rd, * testsuite/ld-sh/tlsbin-2.d, * testsuite/ld-sh/tlspic-2.d, * testsuite/ld-sparc/gotop32.rd, * testsuite/ld-sparc/gotop64.rd, * testsuite/ld-sparc/tlssunbin32.rd, * testsuite/ld-sparc/tlssunbin64.rd, * testsuite/ld-sparc/tlssunnopic32.rd, * testsuite/ld-sparc/tlssunnopic64.rd, * testsuite/ld-sparc/tlssunpic32.rd, * testsuite/ld-sparc/tlssunpic64.rd, * testsuite/ld-x86-64/bnd-branch-1-now.d, * testsuite/ld-x86-64/bnd-ifunc-1-now.d, * testsuite/ld-x86-64/bnd-ifunc-2-now.d, * testsuite/ld-x86-64/bnd-ifunc-2.d, * testsuite/ld-x86-64/bnd-plt-1-now.d, * testsuite/ld-x86-64/bnd-plt-1.d, * testsuite/ld-x86-64/ibt-plt-1-x32.d, * testsuite/ld-x86-64/ibt-plt-1.d, * testsuite/ld-x86-64/ibt-plt-2a-x32.d, * testsuite/ld-x86-64/ibt-plt-2a.d, * testsuite/ld-x86-64/ibt-plt-2b-x32.d, * testsuite/ld-x86-64/ibt-plt-2b.d, * testsuite/ld-x86-64/ibt-plt-2c-x32.d, * testsuite/ld-x86-64/ibt-plt-2c.d, * testsuite/ld-x86-64/ibt-plt-2d-x32.d, * testsuite/ld-x86-64/ibt-plt-2d.d, * testsuite/ld-x86-64/ibt-plt-3a-x32.d, * testsuite/ld-x86-64/ibt-plt-3a.d, * testsuite/ld-x86-64/ibt-plt-3b-x32.d, * testsuite/ld-x86-64/ibt-plt-3b.d, * testsuite/ld-x86-64/ibt-plt-3c-x32.d, * testsuite/ld-x86-64/ibt-plt-3c.d, * testsuite/ld-x86-64/ibt-plt-3d-x32.d, * testsuite/ld-x86-64/ibt-plt-3d.d, * testsuite/ld-x86-64/ilp32-4-nacl.d, * testsuite/ld-x86-64/ilp32-4.d, * testsuite/ld-x86-64/load1c-nacl.d, * testsuite/ld-x86-64/load1c.d, * testsuite/ld-x86-64/load1d-nacl.d, * testsuite/ld-x86-64/load1d.d, * testsuite/ld-x86-64/mpx3n.dd, * testsuite/ld-x86-64/mpx4.dd, * testsuite/ld-x86-64/mpx4n.dd, * testsuite/ld-x86-64/plt2.dd, * testsuite/ld-x86-64/pr14207.d, * testsuite/ld-x86-64/pr19162.d, * testsuite/ld-x86-64/pr20253-1f.d, * testsuite/ld-x86-64/pr20253-1l.d, * testsuite/ld-x86-64/pr20830a-now.d, * testsuite/ld-x86-64/pr20830a.d, * testsuite/ld-x86-64/pr20830b-now.d, * testsuite/ld-x86-64/pr20830b.d, * testsuite/ld-x86-64/pr21038a-now.d, * testsuite/ld-x86-64/pr21038a.d, * testsuite/ld-x86-64/pr21038b-now.d, * testsuite/ld-x86-64/pr21038b.d, * testsuite/ld-x86-64/pr21038c-now.d, * testsuite/ld-x86-64/pr21038c.d, * testsuite/ld-x86-64/tlsbin-nacl.rd, * testsuite/ld-x86-64/tlsbin.rd, * testsuite/ld-x86-64/tlsbin2-nacl.rd, * testsuite/ld-x86-64/tlsbin2.rd, * testsuite/ld-x86-64/tlsbindesc-nacl.rd, * testsuite/ld-x86-64/tlsbindesc.rd, * testsuite/ld-x86-64/tlsdesc-nacl.rd, * testsuite/ld-x86-64/tlsdesc.rd, * testsuite/ld-x86-64/tlsgdesc-nacl.rd, * testsuite/ld-x86-64/tlsgdesc.rd, * testsuite/ld-x86-64/tlspic-nacl.rd, * testsuite/ld-x86-64/tlspic.rd, * testsuite/ld-x86-64/tlspic2-nacl.rd, * testsuite/ld-x86-64/tlspic2.rd: Update.
2018-06-07EXECUTABLE_SYMBOLS -> OTHER_SYMBOLSAlan Modra3-5/+7
EXECUTABLE_SYMBOLS is supposed to be true to its name, only defining symbols for the executable. * emulparams/elf64bmip.sh (EXECUTABLE_SYMBOLS): Don't define. (OTHER_SYMBOLS): Define this instead. * emulparams/elf32bmipn32.sh (EXECUTABLE_SYMBOLS): Don't define. (OTHER_SYMBOLS): Define similarly to elf64bmip.sh. * emulparams/elf64hppa.sh (EXECUTABLE_SYMBOLS): Don't define. (OTHER_SYMBOLS): Define instead.
2018-06-07TIC6X __c6xabi_DSBT_BASEAlan Modra1-1/+0
Adding an undefined __c6xabi_DSBT_BASE via an EXTERN in the linker script isn't ideal, as the symbol is not always needed. This patch adds the undefined symbol on encountering relocations where it is implicitly referenced. bfd/ * elf32-tic6x.c (elf32_tic6x_check_relocs): Reference __c6xabi_DSBT_BASE explicitly for R_C6000_SBR_* relocs. ld/ * emulparams/elf32_tic6x_le.sh (EXECUTABLE_SYMBOLS): Don't define.
2018-05-18Add support for the Freescale s12z processor.John Darrington1-0/+18
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-05-08RISC-V: New emulations to make path searches follow glibc ABI.Jim Wilson7-11/+82
ld/ PR ld/22962 * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32lriscv_ilp32f.c, eelf32lriscv_ilp32.c, eelf64lriscv_lp64f.c, eelf64lriscv_lp64.c. (eelf32lriscv_ilp32f.c, eelf32lriscv_ilp32.c): New build rules. (eelf64lriscv_lp64f.c, eelf64lriscv_lp64.c): New build rules. * Makefile.in: Regenerated. * configure.tgt (riscv32*-*-linux*, riscv64*-*-linux*): New. * ld/emulparams/elf32lriscv.sh: Set LIBPATH_SUFFIX. * ld/emulparams/elf32lriscv_ilp32.sh: New. * ld/emulparams/elf32lriscv_ilp32f.sh: New. * ld/emulparams/elf64lriscv-defs.sh: Don't set LIBPATH_SUFFIX here. * ld/emulparams/elf64lriscv.sh: Set LIBPATH_SUFFIX. * ld/emulparams/elf64lriscv_lp64.sh: New. * ld/emulparams/elf64lriscv_lp64f.sh: New. * ld/genscripts.sh (append_to_lib_path): Change LIBPATH_SUFFIX test to a for. Inside loop, change LIBPATH_SUFFIX uses to libpath_suffix. (LIB_PATH): In LIB_PATH if, add loop for LIBPATH_SUFFIX, changes uses inside loop to libpath_suffix.
2018-04-25[ARM] Implement FDPIC relocations.Christophe Lyon1-2/+6
This is the main BFD patch, that enables the linker to actually handle the FDPIC relocations. 2018-04-25 Christophe Lyon <christophe.lyon@st.com> Mickaël Guêné <mickael.guene@st.com> bfd/ * elf32-arm.c (struct fdpic_local): New. (elf_arm_obj_tdata): Add local_fdpic_cnts field. (elf32_arm_local_fdpic_cnts): New. (struct fdpic_global): New. (elf32_arm_link_hash_entry): Add fdpic_cnts field. (elf32_arm_link_hash_table): Add srofixup field. (arm_elf_add_rofixup): New. (arm_elf_fill_funcdesc): New. (elf32_arm_link_hash_newfunc): Handle fdpic_cnts. (elf32_arm_allocate_local_sym_info): Likewise. (create_got_section): Create .rofixup section. (elf32_arm_copy_indirect_symbol): Handle fdpic_cnts. (bfd_elf32_arm_set_target_params): Handle FDPIC. (elf32_arm_final_link_relocate): Likewise. (elf32_arm_check_relocs): Likewise. (allocate_dynrelocs_for_symbol): Likewise. (elf32_arm_size_dynamic_sections): Likewise. (elf32_arm_finish_dynamic_sections): Likewise. (elf32_arm_output_arch_local_syms): Likewise. (elf32_arm_fdpic_omit_section_dynsym): New. ld/ * emulparams/armelf_linux_fdpiceabi.sh: Add .rofixup section.
2018-04-25[ARM] Add armelf_linux_fdpiceabi and armelfb_linux_fdpiceabi BFD backendsChristophe Lyon2-0/+15
Initial definition of these new backends. 2018-04-25 Christophe Lyon <christophe.lyon@st.com> Mickaël Guêné <mickael.guene@st.com> bfd/ * config.bfd (arm*-*-linux-*): Add arm_elf32_fdpic_be_vec and arm_elf32_fdpic_le_vec to targ_selvecs. Accept arm*-*-uclinuxfdpiceabi. * configure.ac: Add support for arm_elf32_fdpic_be_vec and arm_elf32_fdpic_le_vec. * configure: Regenerate. * elf32-arm.c (struct elf32_arm_link_hash_table): Add fdpic_p. (elf32_arm_link_hash_table_create): Initialize fdpic_p. (TARGET_LITTLE_SYM, TARGET_LITTLE_NAME, TARGET_BIG_SYM) (TARGET_BIG_NAME, elf_match_priority): Define for FDPIC targets. (elf32_arm_fdpic_link_hash_table_create): New. * targets.c (_bfd_target_vector): Add arm_elf32_fdpic_be_vec and arm_elf32_fdpic_le_vec. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Add earmelf_linux_fdpiceabi.c and earmelfb_linux_fdpiceabi.c. (earmelf_linux_fdpiceabi.c, earmelfb_linux_fdpiceabi.c): New rules. * Makefile.in: Regenerate. * configure.tgt (arm*-*-uclinuxfdpiceabi): Handle new target. * emulparams/armelf_linux_fdpiceabi.sh: New. * emulparams/armelfb_linux_fdpiceabi.sh: New.
2018-04-25Remove arm-aout and arm-coff supportAlan Modra5-32/+0
This also removes arm-netbsd (not arm-netbsdelf!), arm-openbsd, and arm-riscix. Those targets weren't on the obsolete list but they are all aout, and it doesn't make all that much sense to remove arm-aout without removing them too. bfd/ * Makefile.am: Remove arm-aout and arm-coff support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * aout-arm.c: Delete. * armnetbsd.c: Delete. * riscix.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/arm/objdump.exp: Remove arm-aout and arm-coff support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove arm-aout and arm-coff support. * config/tc-arm.c: Likewise. * config/tc-arm.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/aarch64/codealign.d: Likewise. * testsuite/gas/aarch64/mapping.d: Likewise. * testsuite/gas/aarch64/mapping2.d: Likewise. * testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.d: Likewise. * testsuite/gas/arm/adds-thumb1-reloc-local.d: Likewise. * testsuite/gas/arm/addsw-bad.d: Likewise. * testsuite/gas/arm/align.d: Likewise. * testsuite/gas/arm/align64.d: Likewise. * testsuite/gas/arm/arch7.d: Likewise. * testsuite/gas/arm/arch7a-mp.d: Likewise. * testsuite/gas/arm/arch7em.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise. * testsuite/gas/arm/arm-it-auto-2.d: Likewise. * testsuite/gas/arm/arm-it-auto-3.d: Likewise. * testsuite/gas/arm/arm-it-auto.d: Likewise. * testsuite/gas/arm/arm-it-bad-2.d: Likewise. * testsuite/gas/arm/arm-it.d: Likewise. * testsuite/gas/arm/armv7e-m+fpv5-d16.d: Likewise. * testsuite/gas/arm/armv7e-m+fpv5-sp-d16.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-scalar-thumb.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-scalar.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-simd.d: Likewise. * testsuite/gas/arm/armv8-a+crypto.d: Likewise. * testsuite/gas/arm/armv8-a+fp.d: Likewise. * testsuite/gas/arm/armv8-a+ras.d: Likewise. * testsuite/gas/arm/armv8-a+rdma-warning.d: Likewise. * testsuite/gas/arm/armv8-a+rdma.d: Likewise. * testsuite/gas/arm/armv8-a+simd.d: Likewise. * testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8-r+fp.d: Likewise. * testsuite/gas/arm/armv8-r+simd.d: Likewise. * testsuite/gas/arm/armv8-r-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8_1-a+simd.d: Likewise. * testsuite/gas/arm/armv8_2+rdma.d: Likewise. * testsuite/gas/arm/armv8_2-a.d: Likewise. * testsuite/gas/arm/armv8_3-a-fp.d: Likewise. * testsuite/gas/arm/armv8_3-a-simd.d: Likewise. * testsuite/gas/arm/armv8a-automatic-hlt.d: Likewise. * testsuite/gas/arm/armv8a-automatic-lda.d: Likewise. * testsuite/gas/arm/attr-syntax.d: Likewise. * testsuite/gas/arm/automatic-bw.d: Likewise. * testsuite/gas/arm/automatic-cbz.d: Likewise. * testsuite/gas/arm/automatic-clrex.d: Likewise. * testsuite/gas/arm/automatic-lda.d: Likewise. * testsuite/gas/arm/automatic-ldaex.d: Likewise. * testsuite/gas/arm/automatic-ldaexb.d: Likewise. * testsuite/gas/arm/automatic-ldrex.d: Likewise. * testsuite/gas/arm/automatic-ldrexd.d: Likewise. * testsuite/gas/arm/automatic-movw.d: Likewise. * testsuite/gas/arm/automatic-sdiv.d: Likewise. * testsuite/gas/arm/automatic-strexb.d: Likewise. * testsuite/gas/arm/barrier-bad-thumb.d: Likewise. * testsuite/gas/arm/barrier-bad.d: Likewise. * testsuite/gas/arm/barrier-thumb.d: Likewise. * testsuite/gas/arm/barrier.d: Likewise. * testsuite/gas/arm/bignum1.d: Likewise. * testsuite/gas/arm/blx-bad.d: Likewise. * testsuite/gas/arm/blx-bl-convert.d: Likewise. * testsuite/gas/arm/blx-local.s: Likewise. * testsuite/gas/arm/crc32-armv8-a-bad.d: Likewise. * testsuite/gas/arm/crc32-armv8-a.d: Likewise. * testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise. * testsuite/gas/arm/crc32-armv8-r.d: Likewise. * testsuite/gas/arm/dis-data.d: Likewise. * testsuite/gas/arm/dis-data2.d: Likewise. * testsuite/gas/arm/dis-data3.d: Likewise. * testsuite/gas/arm/eabi_attr_1.d: Likewise. * testsuite/gas/arm/fp-save.d: Likewise. * testsuite/gas/arm/group-reloc-alu-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-alu-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-alu.d: Likewise. * testsuite/gas/arm/group-reloc-ldc-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldc-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldc.d: Likewise. * testsuite/gas/arm/group-reloc-ldr-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldr-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldr.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs.d: Likewise. * testsuite/gas/arm/insn-error-a.d: Likewise. * testsuite/gas/arm/insn-error-t.d: Likewise. * testsuite/gas/arm/inst-po-2.d: Likewise. * testsuite/gas/arm/inst-po-3.d: Likewise. * testsuite/gas/arm/inst-po-be.d: Likewise. * testsuite/gas/arm/inst-po.d: Likewise. * testsuite/gas/arm/ldconst.d: Likewise. * testsuite/gas/arm/ldgesb-bad.d: Likewise. * testsuite/gas/arm/ldgesh-bad.d: Likewise. * testsuite/gas/arm/ldst-offset0.d: Likewise. * testsuite/gas/arm/local_function.d: Likewise. * testsuite/gas/arm/local_label_coff.d: Likewise. * testsuite/gas/arm/local_label_elf.d: Likewise. * testsuite/gas/arm/mapping.d: Likewise. * testsuite/gas/arm/mapping2.d: Likewise. * testsuite/gas/arm/mapping3.d: Likewise. * testsuite/gas/arm/mapping4.d: Likewise. * testsuite/gas/arm/mapshort-elf.d: Likewise. * testsuite/gas/arm/mask_1-armv8-a.d: Likewise. * testsuite/gas/arm/mask_1-armv8-r.d: Likewise. * testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.d: Likewise. * testsuite/gas/arm/movs-thumb1-reloc-local.d: Likewise. * testsuite/gas/arm/movw-local.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v6t2.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v7-m.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v7e-m.d: Likewise. * testsuite/gas/arm/msr-imm-bad.d: Likewise. * testsuite/gas/arm/msr-reg-bad.d: Likewise. * testsuite/gas/arm/msr-reg-thumb.d: Likewise. * testsuite/gas/arm/nomapping.d: Likewise. * testsuite/gas/arm/nops.d: Likewise. * testsuite/gas/arm/pic.d: Likewise. * testsuite/gas/arm/pinsn.d: Likewise. * testsuite/gas/arm/plt-1.d: Likewise. * testsuite/gas/arm/pr21458.d: Likewise. * testsuite/gas/arm/pr9722.d: Likewise. * testsuite/gas/arm/strex-t.d: Likewise. * testsuite/gas/arm/t2-branch-global.d: Likewise. * testsuite/gas/arm/target-reloc-1.d: Likewise. * testsuite/gas/arm/thumb-b-bad.d: Likewise. * testsuite/gas/arm/thumb-w-bad.d: Likewise. * testsuite/gas/arm/thumb-w-good.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumb2_it.d: Likewise. * testsuite/gas/arm/thumb2_it_auto.d: Likewise. * testsuite/gas/arm/thumb2_it_search.d: Likewise. * testsuite/gas/arm/thumb2_ldmstm.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_armv6.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_armv6t2.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: Likewise. * testsuite/gas/arm/thumb2_pool.d: Likewise. * testsuite/gas/arm/thumb2_vpool.d: Likewise. * testsuite/gas/arm/thumb2_vpool_be.d: Likewise. * testsuite/gas/arm/thumb32.d: Likewise. * testsuite/gas/arm/thumbver.d: Likewise. * testsuite/gas/arm/tls.d: Likewise. * testsuite/gas/arm/tls_vxworks.d: Likewise. * testsuite/gas/arm/undefined.d: Likewise. * testsuite/gas/arm/undefined_coff.d: Likewise. * testsuite/gas/arm/unwind.d: Likewise. * testsuite/gas/arm/v4bx.d: Likewise. * testsuite/gas/arm/vcmp-noprefix-imm.d: Likewise. * testsuite/gas/arm/vcvt-bad.d: Likewise. * testsuite/gas/arm/vfma1.d: Likewise. * testsuite/gas/arm/vldconst.d: Likewise. * testsuite/gas/arm/vldconst_be.d: Likewise. * testsuite/gas/arm/vldm-arm.d: Likewise. * testsuite/gas/arm/vldr.d: Likewise. * testsuite/gas/arm/weakdef-1.d: Likewise. * testsuite/gas/arm/weakdef-2.d: Likewise. * config/te-riscix.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove arm-aout and arm-coff support. * configure.tgt: Likewise. * testsuite/ld-arm/attr-merge-div-00.d: Likewise. * testsuite/ld-arm/attr-merge-div-01-m3.d: Likewise. * testsuite/ld-arm/attr-merge-div-01.d: Likewise. * testsuite/ld-arm/attr-merge-div-02.d: Likewise. * testsuite/ld-arm/attr-merge-div-10-m3.d: Likewise. * testsuite/ld-arm/attr-merge-div-10.d: Likewise. * testsuite/ld-arm/attr-merge-div-11.d: Likewise. * testsuite/ld-arm/attr-merge-div-12.d: Likewise. * testsuite/ld-arm/attr-merge-div-120.d: Likewise. * testsuite/ld-arm/attr-merge-div-20.d: Likewise. * testsuite/ld-arm/attr-merge-div-21.d: Likewise. * testsuite/ld-arm/attr-merge-div-22.d: Likewise. * testsuite/ld-arm/attr-merge-hardfp-use-1.d: Likewise. * testsuite/ld-arm/attr-merge-hardfp-use-2.d: Likewise. * testsuite/ld-arm/attr-merge-nosection-1.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-2.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-2r.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-3.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-1.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-10.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-10r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-11.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-11r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-12.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-12r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-13.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-13r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-14.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-14r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-1r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-2.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-2r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-3.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-3r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-4.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-4r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-5.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-5r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-6.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-6r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-7.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-7r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-8.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-8r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-9.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-9r.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-00-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-00.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-02-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-02.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-04-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-04.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-20-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-20.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-22-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-22.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-24-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-40-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-40.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-42-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-44-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-44.d: Likewise. * testsuite/ld-arm/eabi-hard-float.d: Likewise. * testsuite/ld-arm/eabi-soft-float-ABI4.d: Likewise. * testsuite/ld-arm/eabi-soft-float-r.d: Likewise. * testsuite/ld-arm/eabi-soft-float.d: Likewise. * testsuite/ld-arm/gc-hidden-1.d: Likewise. * emulparams/armaoutb.sh: Delete. * emulparams/armaoutl.sh: Delete. * emulparams/armcoff.sh: Delete. * emulparams/armnbsd.sh: Delete. * emulparams/riscix.sh: Delete. * scripttempl/armaout.sc: Delete. * scripttempl/armcoff.sc: Delete. * scripttempl/riscix.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-18various i386-aout and i386-coff target removalAlan Modra5-39/+0
Also tidies some other aout leftovers in binutils-common.exp. bfd/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * targets.c: Likewise. * freebsd.h: Delete. * i386dynix.c: Delete. * i386freebsd.c: Delete. * i386linux.c: Delete. * i386mach3.c: Delete. * i386netbsd.c: Delete. * i386os9k.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/lib/binutils-common.exp: Remove support for assorted aout targets. gas/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config/obj-elf.c: Likewise. * config/tc-i386.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * config/te-dynix.h: Delete. * config/te-i386aix.h: Delete. * config/te-mach.h: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. include/ * aout/dynix3.h: Delete. ld/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * configure.tgt: Likewise. * testsuite/ld-discard/discard.exp: Likewise. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/tls.exp: Likewise. * testsuite/ld-elf/tls_common.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-gc/abi-note.d: Likewise. * testsuite/ld-gc/pr19167.d: Likewise. * testsuite/ld-gc/pr20022.d: Likewise. * testsuite/ld-gc/start.d: Likewise. * testsuite/ld-gc/stop.d: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc.exp: Likewise. * testsuite/ld-linkonce/linkonce.exp: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-scripts/empty-address-2a.d: Likewise. * testsuite/ld-scripts/empty-address-2b.d: Likewise. * testsuite/ld-scripts/phdrs2.exp: Likewise. * testsuite/ld-scripts/section-match-1.d: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * testsuite/ld-size/size.exp: Likewise. * testsuite/ld-sparc/sparc.exp: Likewise. * emulparams/i386coff.sh: Delete. * emulparams/i386linux.sh: Delete. * emulparams/i386mach.sh: Delete. * emulparams/i386nbsd.sh: Delete. * emulparams/vsta.sh: Delete. * scripttempl/i386coff.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove arm-epoc-pe supportAlan Modra1-9/+0
bfd/ * Makefile.am: Remove arm-epoc-pe support. * coff-arm.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * epoc-pe-arm.c: Delete. * epoc-pei-arm.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * configure.ac: Remove arm-epoc-pe support. * dlltool.c: Likewise. * configure: Regenerate. gas/ * Makefile.am: Remove arm-epoc-pe support. * config/tc-arm.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/gas.exp: Likewise. * testsuite/gas/arm/local_label_coff.d: Likewise. * testsuite/gas/arm/undefined.d: Likewise. * testsuite/gas/arm/undefined_coff.d: Likewise. * config/te-epoc-pe.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove arm-epoc-pe support. * configure.tgt: Likewise. * emultempl/pe.em: Likewise. * pe-dll.c: Likewise. * testsuite/ld-scripts/fill.d: Likewise. * testsuite/ld-scripts/fill16.d: Likewise. * emulparams/arm_epoc_pe.sh: Delete. * scripttempl/epocpe.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove sparc-aout and sparc-coff supportAlan Modra5-40/+0
bfd/ * Makefile.am: Remove sparc-aout and sparc-coff support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * aout-sparcle.c: Delete. * aoutf1.h: Delete. * cf-sparclynx.c: Delete. * coff-sparc.c: Delete. * demo64.c: Delete. * sparclinux.c: Delete. * sparclynx.c: Delete. * sparcnetbsd.c: Delete. * sunos.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/lib/binutils-common.exp: Remove sparc-aout and sparc-coff support. gas/ * Makefile.am: Remove sparc-aout and sparc-coff support. * config/obj-coff.h: Likewise. * config/tc-sparc.c: Likewise. * config/tc-sparc.h: Likewise. * configure.tgt: Likewise. * config/te-sparcaout.h: Delete. * testsuite/gas/sun4/addend.d: Delete. * testsuite/gas/sun4/addend.exp: Delete. * testsuite/gas/sun4/addend.s: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sparc-aout and sparc-coff support. * configure.tgt: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * emulparams/coff_sparc.sh: Delete. * emulparams/sparcaout.sh: Delete. * emulparams/sparclinux.sh: Delete. * emulparams/sparcnbsd.sh: Delete. * emulparams/sun4.sh: Delete. * scripttempl/sparccoff.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove m68k-aout and m68k-coff supportAlan Modra11-81/+0
include/ * aout/host.h: Remove m68k-aout and m68k-coff support. * aout/hp300hpux.h: Delete. * coff/apollo.h: Delete. * coff/aux-coff.h: Delete. * coff/m68k.h: Delete. bfd/ * Makefile.am: Remove m68k-aout and m68k-coff support. * aoutf1.h: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * bfd-in.h: Likewise. * bfd.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * configure.host: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * freebsd.h: Likewise. * gen-aout.c: Likewise. * hpux-core.c: Likewise. * libaout.h: Likewise. * libbfd-in.h: Likewise. * pdp11.c: Likewise. * peicode.h: Likewise. * riscix.c: Likewise. * targets.c: Likewise. * aout0.c: Delete. * coff-apollo.c: Delete. * coff-aux.c: Delete. * coff-m68k.c: Delete. * coff-svm68k.c: Delete. * coff-u68k.c: Delete. * hosts/delta68.h: Delete. * hosts/hp300bsd.h: Delete. * hosts/m68kaux.h: Delete. * hosts/news.h: Delete. * hp300bsd.c: Delete. * hp300hpux.c: Delete. * liboasys.h: Delete. * m68k4knetbsd.c: Delete. * m68klinux.c: Delete. * m68knetbsd.c: Delete. * oasys.c: Delete. * versados.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff support. * testsuite/binutils-all/copy-3.d: Likewise. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove m68k-aout and m68k-coff support. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/weakref1u.d: Likewise. * testsuite/gas/m68k/all.exp: Likewise. * testsuite/gas/m68k/br-isaa.d: Likewise. * testsuite/gas/m68k/br-isab.d: Likewise. * testsuite/gas/m68k/br-isac.d: Likewise. * config/te-psos.h: Delete. * config/te-sun3.h: Delete. * testsuite/gas/m68k-coff/gas.exp: Delete. * testsuite/gas/m68k-coff/p2389.s: Delete. * testsuite/gas/m68k-coff/p2389a.s: Delete. * testsuite/gas/m68k-coff/p2430.s: Delete. * testsuite/gas/m68k-coff/p2430a.s: Delete. * testsuite/gas/m68k-coff/t1.s: Delete. * testsuite/gas/m68k/p3041.d: Delete. * testsuite/gas/m68k/p3041.s: Delete. * testsuite/gas/m68k/p3041data.d: Delete. * testsuite/gas/m68k/p3041data.s: Delete. * testsuite/gas/m68k/p3041pcrel.d: Delete. * testsuite/gas/m68k/p3041pcrel.s: Delete. * testsuite/gas/m68k/t2.d: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove m68k-aout and m68k-coff support. * configure.tgt: Likewise. * emultempl/m68kelf.em: Likewise. * ld.texinfo: Likewise. * mri.c: Likewise. * emulparams/delta68.sh: Delete. * emulparams/hp300bsd.sh: Delete. * emulparams/hp3hpux.sh: Delete. * emulparams/m68k4knbsd.sh: Delete. * emulparams/m68kaout.sh: Delete. * emulparams/m68kaux.sh: Delete. * emulparams/m68kcoff.sh: Delete. * emulparams/m68klinux.sh: Delete. * emulparams/m68knbsd.sh: Delete. * emulparams/m68kpsos.sh: Delete. * emulparams/sun3.sh: Delete. * emultempl/m68kcoff.em: Delete. * scripttempl/delta68.sc: Delete. * scripttempl/m68kaux.sc: Delete. * scripttempl/m68kcoff.sc: Delete. * scripttempl/psos.sc: Delete. * testsuite/ld-versados/t1-1.ro: Delete. * testsuite/ld-versados/t1-2.ro: Delete. * testsuite/ld-versados/t1.ld: Delete. * testsuite/ld-versados/t1.ook: Delete. * testsuite/ld-versados/t2-1.ro: Delete. * testsuite/ld-versados/t2-2.ro: Delete. * testsuite/ld-versados/t2-3.ro: Delete. * testsuite/ld-versados/t2.ld: Delete. * testsuite/ld-versados/t2.ook: Delete. * testsuite/ld-versados/versados.exp: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove sh5 and sh64 supportAlan Modra10-132/+0
include/ * dis-asm.h: Remove sh5 and sh64 support. bfd/ * Makefile.am: Remove sh5 and sh64 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-sh.c: Likewise. * elf32-sh-relocs.h: Likewise. * elf32-sh.c: Likewise. * targets.c: Likewise. * elf32-sh64-com.c: Delete. * elf32-sh64.c: Delete. * elf32-sh64.h: Delete. * elf64-sh64.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove sh5 and sh64 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Delete. * sh64-opc.c: Delete. * sh64-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. bintuils/ * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. gas/ * Makefile.am: Remove sh5 and sh64 support. * config/tc-sh.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/cfi/cfi.exp: Likewise. * testsuite/gas/sh/basic.exp: Likewise. * config/tc-sh64.c: Delete. * config/tc-sh64.h: Delete. * doc/c-sh64.texi: Delete. * testsuite/gas/sh/sh64/abi-32.d: Delete. * testsuite/gas/sh/sh64/abi-32.s: Delete. * testsuite/gas/sh/sh64/abi-64.d: Delete. * testsuite/gas/sh/sh64/abi-64.s: Delete. * testsuite/gas/sh/sh64/basic-1.d: Delete. * testsuite/gas/sh/sh64/basic-1.s: Delete. * testsuite/gas/sh/sh64/case-1.d: Delete. * testsuite/gas/sh/sh64/case-1.s: Delete. * testsuite/gas/sh/sh64/case-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange1-1.d: Delete. * testsuite/gas/sh/sh64/crange1-2.d: Delete. * testsuite/gas/sh/sh64/crange1.s: Delete. * testsuite/gas/sh/sh64/crange2-1.d: Delete. * testsuite/gas/sh/sh64/crange2-2.d: Delete. * testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange2.s: Delete. * testsuite/gas/sh/sh64/crange3-1.d: Delete. * testsuite/gas/sh/sh64/crange3.s: Delete. * testsuite/gas/sh/sh64/crange4-1.d: Delete. * testsuite/gas/sh/sh64/crange4.s: Delete. * testsuite/gas/sh/sh64/crange5-1.d: Delete. * testsuite/gas/sh/sh64/crange5.s: Delete. * testsuite/gas/sh/sh64/creg-1.d: Delete. * testsuite/gas/sh/sh64/creg-1.s: Delete. * testsuite/gas/sh/sh64/creg-2.d: Delete. * testsuite/gas/sh/sh64/creg-2.s: Delete. * testsuite/gas/sh/sh64/datal-1.s: Delete. * testsuite/gas/sh/sh64/datal-2.d: Delete. * testsuite/gas/sh/sh64/datal-2.s: Delete. * testsuite/gas/sh/sh64/datal-3.s: Delete. * testsuite/gas/sh/sh64/datal32-1.d: Delete. * testsuite/gas/sh/sh64/datal32-3.d: Delete. * testsuite/gas/sh/sh64/datal64-1.d: Delete. * testsuite/gas/sh/sh64/datal64-3.d: Delete. * testsuite/gas/sh/sh64/eh-1.d: Delete. * testsuite/gas/sh/sh64/eh-1.s: Delete. * testsuite/gas/sh/sh64/endian-1.d: Delete. * testsuite/gas/sh/sh64/endian-1.s: Delete. * testsuite/gas/sh/sh64/endian-2.d: Delete. * testsuite/gas/sh/sh64/endian-2.s: Delete. * testsuite/gas/sh/sh64/err-1.s: Delete. * testsuite/gas/sh/sh64/err-2.s: Delete. * testsuite/gas/sh/sh64/err-3.s: Delete. * testsuite/gas/sh/sh64/err-4.s: Delete. * testsuite/gas/sh/sh64/err-abi-32.s: Delete. * testsuite/gas/sh/sh64/err-abi-64.s: Delete. * testsuite/gas/sh/sh64/err-dsp.s: Delete. * testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete. * testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt-1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete. * testsuite/gas/sh/sh64/err-ptb-1.s: Delete. * testsuite/gas/sh/sh64/err-ptb-2.s: Delete. * testsuite/gas/sh/sh64/err.exp: Delete. * testsuite/gas/sh/sh64/immexpr1.s: Delete. * testsuite/gas/sh/sh64/immexpr2.s: Delete. * testsuite/gas/sh/sh64/immexpr32-1.d: Delete. * testsuite/gas/sh/sh64/immexpr32-2.d: Delete. * testsuite/gas/sh/sh64/immexpr64-1.d: Delete. * testsuite/gas/sh/sh64/immexpr64-2.d: Delete. * testsuite/gas/sh/sh64/lineno.d: Delete. * testsuite/gas/sh/sh64/lineno.s: Delete. * testsuite/gas/sh/sh64/localcom-1.d: Delete. * testsuite/gas/sh/sh64/localcom-1.s: Delete. * testsuite/gas/sh/sh64/mix-1.d: Delete. * testsuite/gas/sh/sh64/mix-1.s: Delete. * testsuite/gas/sh/sh64/mix-noexp-1.d: Delete. * testsuite/gas/sh/sh64/movi-1.s: Delete. * testsuite/gas/sh/sh64/movi-2.s: Delete. * testsuite/gas/sh/sh64/movi-3.d: Delete. * testsuite/gas/sh/sh64/movi-3.s: Delete. * testsuite/gas/sh/sh64/movi32-1.d: Delete. * testsuite/gas/sh/sh64/movi32-2.d: Delete. * testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/movi64-1.d: Delete. * testsuite/gas/sh/sh64/movi64-2.d: Delete. * testsuite/gas/sh/sh64/movi64-2.s: Delete. * testsuite/gas/sh/sh64/movi64-3.d: Delete. * testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt-1.d: Delete. * testsuite/gas/sh/sh64/pt-1.s: Delete. * testsuite/gas/sh/sh64/pt-2.s: Delete. * testsuite/gas/sh/sh64/pt-noexp-1.d: Delete. * testsuite/gas/sh/sh64/pt32-1.d: Delete. * testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt64-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-2.d: Delete. * testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/ptc-1.s: Delete. * testsuite/gas/sh/sh64/ptc32-1.d: Delete. * testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext-1.s: Delete. * testsuite/gas/sh/sh64/ptext32-1.d: Delete. * testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/rel-1.s: Delete. * testsuite/gas/sh/sh64/rel-2.s: Delete. * testsuite/gas/sh/sh64/rel-3.s: Delete. * testsuite/gas/sh/sh64/rel-4.s: Delete. * testsuite/gas/sh/sh64/rel-5.s: Delete. * testsuite/gas/sh/sh64/rel32-1.d: Delete. * testsuite/gas/sh/sh64/rel32-2.d: Delete. * testsuite/gas/sh/sh64/rel32-3.d: Delete. * testsuite/gas/sh/sh64/rel32-4.d: Delete. * testsuite/gas/sh/sh64/rel32-5.d: Delete. * testsuite/gas/sh/sh64/rel64-1.d: Delete. * testsuite/gas/sh/sh64/rel64-2.d: Delete. * testsuite/gas/sh/sh64/rel64-3.d: Delete. * testsuite/gas/sh/sh64/rel64-4.d: Delete. * testsuite/gas/sh/sh64/rel64-5.d: Delete. * testsuite/gas/sh/sh64/relax-1.d: Delete. * testsuite/gas/sh/sh64/relax-1.s: Delete. * testsuite/gas/sh/sh64/relax-2.d: Delete. * testsuite/gas/sh/sh64/relax-2.s: Delete. * testsuite/gas/sh/sh64/relax-3.d: Delete. * testsuite/gas/sh/sh64/relax-3.s: Delete. * testsuite/gas/sh/sh64/sh64.exp: Delete. * testsuite/gas/sh/sh64/shift-1.s: Delete. * testsuite/gas/sh/sh64/shift-2.s: Delete. * testsuite/gas/sh/sh64/shift-3.s: Delete. * testsuite/gas/sh/sh64/shift32-1.d: Delete. * testsuite/gas/sh/sh64/shift32-3.d: Delete. * testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete. * testsuite/gas/sh/sh64/shift64-1.d: Delete. * testsuite/gas/sh/sh64/shift64-2.d: Delete. * testsuite/gas/sh/sh64/shift64-3.d: Delete. * testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete. * testsuite/gas/sh/sh64/syntax-1.d: Delete. * testsuite/gas/sh/sh64/syntax-1.s: Delete. * testsuite/gas/sh/sh64/syntax-2.d: Delete. * testsuite/gas/sh/sh64/syntax-2.s: Delete. * testsuite/gas/sh/sh64/ua-1.s: Delete. * testsuite/gas/sh/sh64/ua32-1.d: Delete. * testsuite/gas/sh/sh64/ua64-1.d: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sh5 and sh64 support. * configure.tgt: Likewise. * ldlang.c: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-gc/pr13683.d: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/ld-r-1.d: Likewise. * testsuite/ld-sh/rd-sh.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * emulparams/shelf32.sh: Delete. * emulparams/shelf32_linux.sh: Delete. * emulparams/shelf32_nbsd.sh: Delete. * emulparams/shelf64.sh: Delete. * emulparams/shelf64_nbsd.sh: Delete. * emulparams/shlelf32.sh: Delete. * emulparams/shlelf32_linux.sh: Delete. * emulparams/shlelf32_nbsd.sh: Delete. * emulparams/shlelf64.sh: Delete. * emulparams/shlelf64_nbsd.sh: Delete. * emultempl/sh64elf.em: Delete. * testsuite/ld-sh/sh64/abi32.sd: Delete. * testsuite/ld-sh/sh64/abi32.xd: Delete. * testsuite/ld-sh/sh64/abi64.sd: Delete. * testsuite/ld-sh/sh64/abi64.xd: Delete. * testsuite/ld-sh/sh64/abixx-noexp.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.xd: Delete. * testsuite/ld-sh/sh64/crange-1.s: Delete. * testsuite/ld-sh/sh64/crange-2a.s: Delete. * testsuite/ld-sh/sh64/crange-2b.s: Delete. * testsuite/ld-sh/sh64/crange-2c.s: Delete. * testsuite/ld-sh/sh64/crange-2d.s: Delete. * testsuite/ld-sh/sh64/crange-2e.s: Delete. * testsuite/ld-sh/sh64/crange-2f.s: Delete. * testsuite/ld-sh/sh64/crange-2g.s: Delete. * testsuite/ld-sh/sh64/crange-2h.s: Delete. * testsuite/ld-sh/sh64/crange-2i.s: Delete. * testsuite/ld-sh/sh64/crange1.rd: Delete. * testsuite/ld-sh/sh64/crange2.rd: Delete. * testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete. * testsuite/ld-sh/sh64/crange3-media.rd: Delete. * testsuite/ld-sh/sh64/crange3.dd: Delete. * testsuite/ld-sh/sh64/crange3.rd: Delete. * testsuite/ld-sh/sh64/crangerel1.rd: Delete. * testsuite/ld-sh/sh64/crangerel2.rd: Delete. * testsuite/ld-sh/sh64/dlsection-1.s: Delete. * testsuite/ld-sh/sh64/dlsection.sd: Delete. * testsuite/ld-sh/sh64/endian.dbd: Delete. * testsuite/ld-sh/sh64/endian.dld: Delete. * testsuite/ld-sh/sh64/endian.ld: Delete. * testsuite/ld-sh/sh64/endian.s: Delete. * testsuite/ld-sh/sh64/endian.sbd: Delete. * testsuite/ld-sh/sh64/endian.sld: Delete. * testsuite/ld-sh/sh64/gotplt.d: Delete. * testsuite/ld-sh/sh64/gotplt.map: Delete. * testsuite/ld-sh/sh64/gotplt.s: Delete. * testsuite/ld-sh/sh64/init-cmpct.d: Delete. * testsuite/ld-sh/sh64/init-media.d: Delete. * testsuite/ld-sh/sh64/init.s: Delete. * testsuite/ld-sh/sh64/init64.d: Delete. * testsuite/ld-sh/sh64/mix1-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix1.sd: Delete. * testsuite/ld-sh/sh64/mix1.xd: Delete. * testsuite/ld-sh/sh64/mix2-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix2.sd: Delete. * testsuite/ld-sh/sh64/mix2.xd: Delete. * testsuite/ld-sh/sh64/rd-sh64.exp: Delete. * testsuite/ld-sh/sh64/rel-1.s: Delete. * testsuite/ld-sh/sh64/rel-2.s: Delete. * testsuite/ld-sh/sh64/rel32.xd: Delete. * testsuite/ld-sh/sh64/rel64.xd: Delete. * testsuite/ld-sh/sh64/relax.exp: Delete. * testsuite/ld-sh/sh64/relax1.s: Delete. * testsuite/ld-sh/sh64/relax2.s: Delete. * testsuite/ld-sh/sh64/relax3.s: Delete. * testsuite/ld-sh/sh64/relax4.s: Delete. * testsuite/ld-sh/sh64/reldl-1.s: Delete. * testsuite/ld-sh/sh64/reldl-2.s: Delete. * testsuite/ld-sh/sh64/reldl32.rd: Delete. * testsuite/ld-sh/sh64/reldl64.rd: Delete. * testsuite/ld-sh/sh64/relfail.exp: Delete. * testsuite/ld-sh/sh64/relfail.s: Delete. * testsuite/ld-sh/sh64/sh64-1.s: Delete. * testsuite/ld-sh/sh64/sh64-2.s: Delete. * testsuite/ld-sh/sh64/sh64.exp: Delete. * testsuite/ld-sh/sh64/shcmp-1.s: Delete. * testsuite/ld-sh/sh64/shdl-1.s: Delete. * testsuite/ld-sh/sh64/shdl-2.s: Delete. * testsuite/ld-sh/sh64/shdl32.xd: Delete. * testsuite/ld-sh/sh64/shdl64.sd: Delete. * testsuite/ld-sh/sh64/shdl64.xd: Delete. * testsuite/ld-sh/sh64/shmix-1.s: Delete. * testsuite/ld-sh/sh64/shmix-2.s: Delete. * testsuite/ld-sh/sh64/shmix-3.s: Delete. * testsuite/ld-sh/sh64/stobin-0-dso.d: Delete. * testsuite/ld-sh/sh64/stobin-1.d: Delete. * testsuite/ld-sh/sh64/stobin.s: Delete. * testsuite/ld-sh/sh64/stolib.s: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove sh-symbianelf supportAlan Modra1-19/+0
bfd/ * Makefile.am: Remove sh-symbianelf support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * elf32-sh-symbian.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. gas/ * config/tc-sh.c: Remove sh-symbianelf support. * config/tc-sh.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * testsuite/gas/sh/reg-prefix.d: Likewise. * testsuite/gas/sh/sh2a-pic.d: Likewise. * config.in: Regenerate. * configure: Regenerate. ld/ * Makefile.am: Remove sh-symbianelf support. * configure.tgt: Likewise. * emulparams/shlsymbian.sh: Delete. * scripttempl/elf32sh-symbian.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove vax-bsd and vax-ultrix supportAlan Modra1-5/+0
bfd/ * Makefile.am: Remove vax-bsd and vax-ultrix support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * vaxbsd.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. ld/ * Makefile.am: Remove vax-bsd and vax-ultrix support. * configure.tgt: Likewise. * emulparams/vax.sh: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove w65 supportAlan Modra1-5/+0
include/ * coff/internal.h: Remove w65 support. * coff/w65.h: Delete. bfd/ * Makefile.am: Remove w65 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-w65.c: Delete. * cpu-w65.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove w65 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * w65-dis.c: Delete. * w65-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove w65 support. ld/ * Makefile.am: Remove w65 support. * configure.tgt: Likewise. * emulparams/w65.sh: Delete. * scripttempl/w65.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove m88k supportAlan Modra1-5/+0
include/ * coff/internal.h: Remove m88k support. * coff/m88k.h: Delete. * opcode/m88k.h: Delete. bfd/ * Makefile.am: Remove m88k support. * aoutx.h: Likewise. * archures.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-ns32k.c: Likewise. * elf32-nds32.c: Likewise. * mach-o.c: Likewise. * netbsd-core.c: Likewise. * reloc.c: Likewise. * targets.c: Likewise. * coff-m88k.c: Delete. * cpu-m88k.c: Delete. * elf32-m88k.c: Delete. * hosts/m88kmach3.h: Delete. * m88kmach3.c: Delete. * m88kopenbsd.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove m88k support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * m88k-dis.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * MAINTAINERS (Mark Kettenis): Move to past maintainers. * testsuite/binutils-all/objdump.exp: Remove m88k support. gas/ * configure.ac: Remove m88k support. * config.in: Regenerate. * configure: Regenerate. ld/ * Makefile.am: Remove m88k support. * configure.host: Likewise. * configure.tgt: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * emulparams/m88kbcs.sh: Delete. * scripttempl/m88kbcs.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove i370 supportAlan Modra1-8/+0
include/ * elf/i370.h: Delete. * opcode/i370.h: Delete. bfd/ * Makefile.am: Remove i370 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * cpu-i370.c: Delete. * elf32-i370.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove i370 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * i370-dis.c: Delete. * i370-opc.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * readelf.c: Remove i370 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * Makefile.am: Remove i370 support. * app.c: Likewise. * config/obj-elf.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Likewise. * testsuite/gas/elf/warn-2.s: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * config/tc-i370.c: Delete. * config/tc-i370.h: Delete. * doc/c-i370.texi: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove i370 support. * configure.tgt: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * emulparams/elf32i370.sh: Delete. * scripttempl/elfi370.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove h8500 supportAlan Modra5-25/+0
include/ * coff/h8500.h: Delete. * coff/internal.h: Remove h8500 support. bfd/ * Makefile.am: Remove h8500 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-h8500.c: Delete. * cpu-h8500.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove h8500 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * h8500-dis.c: Delete. * h8500-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove h8500 support. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/obj-coff.h: Remove h8500 support. ld/ * Makefile.am: Remove h8500 support. * configure.tgt: Likewise. * emulparams/h8500.sh: Delete. * emulparams/h8500b.sh: Delete. * emulparams/h8500c.sh: Delete. * emulparams/h8500m.sh: Delete. * emulparams/h8500s.sh: Delete. * scripttempl/h8500.sc: Delete. * scripttempl/h8500b.sc: Delete. * scripttempl/h8500c.sc: Delete. * scripttempl/h8500m.sc: Delete. * scripttempl/h8500s.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove h8300-coff supportAlan Modra7-48/+0
include/ * coff/h8300.h: Delete. bfd/ * Makefile.am: Remove h8300-coff support. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * reloc16.c: Likewise. * targets.c: Likewise. * coff-h8300.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove h8300-coff support. gas/ * config/obj-coff.h: Remove h8300-coff support. * config/tc-h8300.c: Likewise. * config/tc-h8300.h: Likewise. * testsuite/gas/h8300/h8300.exp: Likewise. * testsuite/gas/h8300/branch-coff.s: Delete. * testsuite/gas/h8300/branchh-coff.s: Delete. * testsuite/gas/h8300/branchs-coff.s: Delete. * testsuite/gas/h8300/ffxx1-coff.d: Delete. * testsuite/gas/h8300/ffxx1-coff.s: Delete. * testsuite/gas/h8300/h8300-coff.exp: Delete. ld/ * Makefile.am: Remove h8300-coff support. * configure.tgt: Likewise. * testsuite/ld-h8300/h8300.exp: Likewise. * emulparams/h8300.sh: Delete. * emulparams/h8300h.sh: Delete. * emulparams/h8300hn.sh: Delete. * emulparams/h8300s.sh: Delete. * emulparams/h8300sn.sh: Delete. * emulparams/h8300sx.sh: Delete. * emulparams/h8300sxn.sh: Delete. * scripttempl/h8300.sc: Delete. * scripttempl/h8300h.sc: Delete. * scripttempl/h8300hn.sc: Delete. * scripttempl/h8300s.sc: Delete. * scripttempl/h8300sn.sc: Delete. * scripttempl/h8300sx.sc: Delete. * scripttempl/h8300sxn.sc: Delete. * testsuite/ld-h8300/relax-3-coff.d: Delete. * testsuite/ld-h8300/relax-4-coff.d: Delete. * testsuite/ld-h8300/relax-5-coff.d: Delete. * testsuite/ld-h8300/relax-6-coff.d: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove tandem supportAlan Modra1-5/+0
bfd/ * config.bfd: Remove tandem support. ld/ * Makefile.am: Remove tandem support. * configure.tgt: Likewise. * emulparams/st2000.sh: Delete. * scripttempl/st2000.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove sony newsos3 supportAlan Modra1-5/+0
include/ * aout/host.h: Remove newsos3 support. bfd/ * Makefile.am: Remove newsos3 support. * aoutx.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * newsos3.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/copy-2.d: Remove newsos3 support. * testsuite/binutils-all/nm.exp: Likewise. ld/ * Makefile.am: Remove newsos3 support. * configure.tgt: Likewise. * emulparams/news.sh: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove netware supportAlan Modra2-14/+0
include/ * nlm/ChangeLog-9315: Delete. * nlm/alpha-ext.h: Delete. * nlm/common.h: Delete. * nlm/external.h: Delete. * nlm/i386-ext.h: Delete. * nlm/internal.h: Delete. * nlm/ppc-ext.h: Delete. * nlm/sparc32-ext.h: Delete. bfd/ * Makefile.am: Remove netware support. * bfd-in.h: Likewise. * bfd.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * ecoff.c: Likewise. * targets.c: Likewise. * libnlm.h: Delete. * nlm-target.h: Delete. * nlm.c: Delete. * nlm32-alpha.c: Delete. * nlm32-i386.c: Delete. * nlm32-ppc.c: Delete. * nlm32-sparc.c: Delete. * nlm32.c: Delete. * nlm64.c: Delete. * nlmcode.h: Delete. * nlmswap.h: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * .gitignore: Remove netware support. * Makefile.am: Likewise. * configure.ac: Likewise. * doc/Makefile.am: Likewise. * doc/binutils.texi: Likewise. * testsuite/binutils-all/nm.exp: Likewise. * nlmconv.c: Delete. * nlmconv.h: Delete. * nlmheader.y: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/ * Makefile.am: Remove netware support. * config/tc-i386.c: Likewise. * configure.tgt: Likewise. * config/te-netware.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gprof/ * corefile.c: Remove netware support. ld/ * Makefile.am: Remove netware support. * configure.tgt: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise. * emulparams/i386nw.sh: Delete. * emulparams/ppcnw.sh: Delete. * scripttempl/nw.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-14powerpc-lynxos and powerpc-windiss fixesAlan Modra2-20/+4
Enabling shared lib tests showed the powerpc-lynxos target is broken, and has been for a long time. The breakage happened in a 2005-05-07 patch of mine, git commit 3b36f7e62, I think. There have been no bug reports I recall so it seems the target is dead. powerpc-windiss is similarly broken. This patch fixes the breakage, and puts the targets on the obsolete list. bfd/ * config.bfd: Add powerpc-*-lynxos* and powerpc-*-windiss* to obsolete list. ld/ * emulparams/elf32ppcwindiss.sh: Rewrite to use elf32ppc.sh. * emulparams/ppclynx.sh: Likewise.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra6-59/+0
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-09Support PLT16 relocs against local symbolsAlan Modra1-0/+4
Necessary if gcc is to use PLT16 relocs to implement -mlongcall, and there isn't a good technical reason why local symbols should be excluded from PLT16 support. Non-ifunc local symbol PLT entries go in a separate section to other PLT entries. In a fixed position executable they won't need to be relocated, and in a PIE or shared library I chose to not implement lazy relocation. bfd/ * elf64-ppc.c (LOCAL_PLT_ENTRY_SIZE): Define. (struct ppc_stub_hash_entry): Add symtype field. (PLT_KEEP): Define. (struct ppc_link_hash_table): Add pltlocal and relpltlocal. (create_linkage_sections): Create pltlocal and relpltlocal. (ppc64_elf_check_relocs): Allow PLT relocs on local symbols. Set PLT_KEEP. (ppc64_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls. (allocate_dynrelocs): Allocate pltlocal and relpltlocal. (ppc64_elf_size_dynamic_sections): Size pltlocal and relpltlocal. Keep PLT entries for inline calls against locals. (ppc_build_one_stub): Use pltlocal as appropriate. (ppc_size_one_stub): Likewise. (ppc64_elf_size_stubs): Set symtype. (build_global_entry_stubs_and_plt): Init pltlocal and write relpltlocal for globals. (write_plt_relocs_for_local_syms): Likewise for local syms. (ppc64_elf_relocate_section): Support PLT for local syms. * elf32-ppc.c (PLT_KEEP): Define. (struct ppc_elf_link_hash_table): Add pltlocal and relpltlocal. (ppc_elf_create_glink): Create pltlocal and relpltlocal. (ppc_elf_check_relocs): Allow PLT relocs on local symbols. Set PLT_KEEP. Adjust update_local_sym_info call. (ppc_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls. (allocate_dynrelocs): Allocate pltlocal and relpltlocal. (ppc_elf_size_dynamic_sections): Size pltlocal and relpltlocal. (ppc_elf_relocate_section): Support PLT16 relocs for local syms. (write_global_sym_plt): Init pltlocal and write relpltlocal. (ppc_finish_symbols): Likewise for locals. ld/ * emulparams/elf32ppc.sh (OTHER_RELRO_SECTIONS_2): Add .branch_lt. (OTHER_GOT_RELOC_SECTIONS): Add .rela.branch_lt. * testsuite/ld-powerpc/elfv2so.d: Update for symbol/stub reordering. * testsuite/ld-powerpc/relbrlt.d: Likewise. * testsuite/ld-powerpc/relbrlt.s: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlstocso.r: Likewise. gold/ * powerpc.cc (Target_powerpc::lplt_): New variable. (Target_powerpc::lplt_section): Associated accessor. (Target_powerpc::plt_off): Handle local non-ifunc symbols. (Target_powerpc::make_lplt_section): New function. (Target_powerpc::make_local_plt_entry): New function. (Powerpc_relobj::do_relocate_sections): Write out lplt. (Output_data_plt_powerpc::first_plt_entry_offset): Zero for lplt. (Output_data_plt_powerpc::add_local_entry): New function. (Output_data_plt_powerpc::do_write): Ignore lplt. (Target_powerpc::make_iplt_section): Make lplt first. (Target_powerpc::make_brlt_section): Make .branch_lt relro. (Target_powerpc::Scan::local): Handle PLT16 relocs.
2018-04-05Stop the IA64 linker from removing unwind tables when garbage collecting.Nick Clifton1-2/+2
PR 23030 * emulparams/elf64_ia64.sh (OTHER_READONLY_SECTIONS): Make sure that the .IA_64.unwind_info and .IA_64.unwind sections are not subject to garbage collection.
generated by cgit v1.1 at 2024-08-17 15:10:15 +0000