| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The PowerPC64 ELFv2 ABI and the PowerPC SysV ABI support a number of
relocations that can be used to create and access a PLT entry.
However, the relocs are not well defined. The PLT16 family of relocs
talk about "the section offset or address of the procedure linkage
table entry". It's plain that we do need a relative address when PIC
as otherwise we'd have dynamic text relocations, but "section offset"
doesn't specify which section. The most obvious one, ".plt", isn't
that useful because there is no readily available way of addressing
the start of the ".plt" section. Much more useful would be "the
GOT/TOC-pointer relative offset of the procedure linkage table entry",
and I suppose you could argue that is a "section offset" of sorts.
For PowerPC64 it is better to use the same TOC-pointer relative
addressing even when non-PIC, since ".plt" may be located outside the
range of a 32-bit address. However, for ppc32 we do want an absolute
address when non-PIC as a GOT pointer may not be set up. Also, for
ppc32 PIC we have a similar situation to R_PPC_PLTREL24 in that the
GOT pointer is set to a location in the .got2 section and we need to
specify the .got2 offset in the PLT16 reloc addend.
This patch supports PLT16 relocations using these semantics. This is
not an ABI change for ppc32 since the relocations were not previously
supported by GNU ld, but is for ppc64 where some of the PLT16 relocs
were supported. I'm not particularly concerned since the old ppc64
PLT16 reloc semantics made them almost completely useless.
bfd/
* elf32-ppc.c (ppc_elf_check_relocs): Handle PLT16 relocs.
(ppc_elf_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Handle PLT16_LO_DS.
(ppc64_elf_relocate_section): Likewise. Correct PLT16
resolution to plt entry relative to toc pointer.
gold/
* powerpc.cc (Target_powerpc::plt_off): New functions.
(is_plt16_reloc): New function.
(Stub_table::plt_off): Use Target_powerpc::plt_off.
(Stub_table::plt_call_size): Use plt_off.
(Stub_table::do_write): Likewise.
(Target_powerpc::Scan::get_reference_flags): Return RELATIVE_REF
for PLT16 relocations.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Return true
for PLT16 relocations.
(Target_powerpc::Scan::global): Make a PLT entry for PLT16 relocations.
(Target_powerpc::Relocate::relocate): Support PLT16 relocations.
(Powerpc_scan_relocatable_reloc::global_strategy): Return RELOC_SPECIAL
for ppc32 plt16 relocs.
|
|
Relocations referring to discarded sections are now treated as errors
instead of warnings.
Also with this patch, we will now print the section group signature and the
object file with the prevailing definition of that group along with the
name of the symbol that the relocation is referring to. This additional
information should be much more useful to anyone trying to track down
the source of such errors.
To do so, we now map each discarded section to the Kept_section info in
the Layout class, and defer the logic that maps a discarded section to
its counterpart in the kept group. This gives us the information we need
to identify the signature symbol given the discarded section, and the
name of the object file that provided the prevailing (i.e., first)
definition of that group.
gold/
* object.cc (Sized_relobj_file::include_section_group): Store
reference to Kept_section info for discarded comdat sections
regardless of size. Move size checking to map_to_kept_section.
(Sized_relobj_file::include_linkonce_section): Likewise.
(Sized_relobj_file::map_to_kept_section): Add section name parameter.
Insert size checking logic from above functions.
(Sized_relobj_file::find_kept_section_object): New method.
(Sized_relobj_file::get_symbol_name): New method.
* object.h (Sized_relobj_file::map_to_kept_section): Add section_name
parameter. Adjust all callers.
(Sized_relobj_file::find_kept_section_object): New method.
(Sized_relobj_file::get_symbol_name): New method.
(Sized_relobj_file::Kept_comdat_section): Replace object and shndx
fields with sh_size, kept_section, symndx, and is_comdat fields.
(Sized_relobj_file::set_kept_comdat_section): Replace kept_object
and kept_shndx parameters with is_comdat, symndx, sh_size, and
kept_section.
(Sized_relobj_file::get_kept_comdat_section): Likewise.
* target-reloc.h (enum Comdat_behavior): Change CB_WARNING to CB_ERROR.
Adjust all references.
(issue_undefined_symbol_error): New function template.
(relocate_section): Pass section name to map_to_kept_section.
Move discarded section code to new function above.
* aarch64.cc (Target_aarch64::scan_reloc_section_for_stubs): Move
declaration for gsym out one level. Call issue_discarded_error.
* arm.cc (Target_arm::scan_reloc_section_for_stubs): Likewise.
* powerpc.cc (Relocate_comdat_behavior): Change CB_WARNING to CB_ERROR.
|
|
gold/
* target-reloc.h (relocate_section): Add local symbol index or global
symbol name to warning about relocation that refers to discarded
section.
|
|
Revert:
2018-04-05 James Cowgill <james.cowgill@mips.com>
PR gold/22770
* mips.cc (Mips_got_info::record_got_page_entry): Fetch existing
page entries for the object's GOT.
Apply:
PR gold/22770
* mips.cc (Mips_got_info::record_got_page_entry): Don't insert
Got_page_entry for object's GOT.
(Mips_got_info::add_got_page_entries): Add all pages from from's GOT.
Rename to add_got_page_count.
(Got_page_entry): Remove num_pages.
|
|
The record_got_page_entry function records and updates the maximum
number of GOT page entries which may be required by an object. In the
case where an existing GOT page entry was expanded, only the entry
belonging to output GOT would have its page count updated. This leaves
the entry belonging to the object GOT with the num_pages count of 1 it
was originally initialized with. Later on when GOTs are being merged in a
multi-got link, this causes the value of entry->num_pages in
add_got_page_entries to always be 1 and underestimates the number of pages
required for the new entry. This in turn leads to an assertion failure in
get_got_page_offset where we run out of pages.
Fix by obtaining the object's GOT entry unconditionally and not just
the first time it gets created. Now that entry2 is always valid, remove
the useless NULL checks.
gold/
PR gold/22770
* mips.cc (Mips_got_info::record_got_page_entry): Fetch existing
page entries for the object's GOT.
|
|
Better security beats better placement for code optimization.
* powerpc.cc (Target_powerpc::make_brlt_section): Make .branch_lt relro.
|
|
|
|
During a -r (or --emit-relocs) link, if two sections had the same name but
different section types, gold would put relocations for both sections into
the same relocation section even though the data sections remained separate.
For .eh_frame sections, when one section is PROGBITS and another is
X86_64_UNWIND, we really should be using the UNWIND section type and
combining the sections anyway. For other sections, we should be
creating one relocation section for each output data section.
gold/
PR gold/23016
* incremental.cc (can_incremental_update): Check for unwind section
type.
* layout.h (Layout::layout): Add sh_type parameter.
* layout.cc (Layout::layout): Likewise.
(Layout::layout_reloc): Create new output reloc section if data
section does not already have one.
(Layout::layout_eh_frame): Check for unwind section type.
(Layout::make_eh_frame_section): Use unwind section type for .eh_frame
and .eh_frame_hdr.
* object.h (Sized_relobj_file::Shdr_write): New typedef.
(Sized_relobj_file::layout_section): Add sh_type parameter.
(Sized_relobj_file::Deferred_layout::Deferred_layout): Add sh_type
parameter.
* object.cc (Sized_relobj_file::check_eh_frame_flags): Check for
unwind section type.
(Sized_relobj_file::layout_section): Add sh_type parameter; pass it
to Layout::layout.
(Sized_relobj_file::do_layout): Make local copy of sh_type.
Force .eh_frame sections to unwind section type.
Pass sh_type to layout_section.
(Sized_relobj_file<size, big_endian>::do_layout_deferred_sections):
Pass sh_type to layout_section.
* output.cc (Output_section::Output_section): Initialize reloc_section_.
* output.h (Output_section::reloc_section): New method.
(Output_section::set_reloc_section): New method.
(Output_section::reloc_section_): New data member.
* target.h (Target::unwind_section_type): New method.
(Target::Target_info::unwind_section_type): New data member.
* aarch64.cc (aarch64_info): Add unwind_section_type.
* arm.cc (arm_info, arm_nacl_info): Likewise.
* i386.cc (i386_info, i386_nacl_info, iamcu_info): Likewise.
* mips.cc (mips_info, mips_nacl_info): Likewise.
* powerpc.cc (powerpc_info): Likewise.
* s390.cc (s390_info): Likewise.
* sparc.cc (sparc_info): Likewise.
* tilegx.cc (tilegx_info): Likewise.
* x86_64.cc (x86_64_info, x86_64_nacl_info): Likewise.
* testsuite/Makefile.am (pr23016_1, pr23016_2): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/testfile.cc: Add unwind_section_type.
* testsuite/pr23016_1.sh: New test script.
* testsuite/pr23016_1a.s: New source file.
* testsuite/pr23016_1b.s: New source file.
* testsuite/pr23016_2.sh: New test script.
* testsuite/pr23016_2a.s: New source file.
* testsuite/pr23016_2b.s: New source file.
|
|
Also recognizes --plugin options when plugins are disabled.
2018-03-28 Cary Coutant <ccoutant@gmail.com>
gold/
PR gold/21423
PR gold/22500
* configure.ac: Call AC_USE_SYSTEM_EXTENSIONS.
Replace check for --enable-plugins with AC_PLUGINS.
* options.cc (parse_plugin, parse_plugin_opt): Remove #ifdef.
(General_options::finalize): Check if plugins enabled.
* options.h (--plugin, --plugin-opt): Define even if plugins not
enabled.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* testsuite/Makefile.in: Regenerate.
|
|
elfcpp/
PR gold/22969
* aarch64.h: Fix spelling of R_AARCH64_TLSLE_LDST16_TPREL_LO12_NC.
gold/
PR gold/22969
* aarch64-reloc.def: Add TLSLE_LDST* relocations.
* aarch64.cc (Target_aarch64::optimize_tls_reloc): Likewise.
(Target_aarch64::Scan::local): Likewise.
(Target_aarch64::Scan::global): Likewise.
(Target_aarch64::Relocate::relocate): Likewise.
(Target_aarch64::Relocate::relocate_tls): Likewise.
|
|
gold/
* testsuite/split_x86_64.sh: Fix bad regexp.
|
|
In PR 22868, two IR files provide conflicting visibility for a symbol.
When a def with PROTECTED visibility is seen after a def with DEFAULT
visibility, gold does not override the visibility. Later, if the
replacement object define the symbol with DEFAULT visibility, the symbol
remains DEFAULT. This was caused by a recent change to allow multiply-defined
absolute symbols, combined with the fact that the plugin framework was using
SHN_ABS as the section index for placeholder symbols. The solution is to
use a real (but arbitrary) section index.
gold/
PR gold/22868
* plugin.cc (Sized_pluginobj::do_add_symbols): Use a real section
index instead of SHN_ABS for defined symbols.
* testsuite/Makefile.am (plugin_pr22868): New test case.
* testsuite/Makefile.in: Regenerate
* testsuite/plugin_pr22868.sh: New test script.
* testsuite/plugin_pr22868_a.c: New source file.
* testsuite/plugin_pr22868_b.c: New source file.
|
|
gold/
* plugin.cc (link_or_copy_file): Remove newlines from warning messages.
Add pedantic check for return value from ::write.
|
|
|
|
With --debug=plugin, gold will log all plugin actions to a log file,
and make copies of plugin-supplied replacement files in a temporary
directory created under the current working directory.
gold/
* debug.h (DEBUG_PLUGIN): New constant.
(DEBUG_ALL): Add DEBUG_PLUGIN.
(debug_string_to_enum): Likewise.
* plugin.cc (make_sized_plugin_object): Add filename parameter.
(Plugin_recorder): New class.
(Plugin_manager::~Plugin_manager): Delete recorder_.
(Plugin_manager::load_plugins): Create and initialize recorder_.
(Plugin_manager::claim_file): Record claimed and unclaimed files.
(Plugin_manager::make_plugin_object): Use object name as name for
plugin object, if available.
(Plugin_manager::add_input_file): Record replacement files.
(Sized_pluginobj::do_add_symbols): Record plugin symbols.
(Plugin_finish::run): Call Plugin_recorder::finish().
(make_sized_plugin_object): Add filename parameter and pass to
Sized_pluginobj constructor.
* plugin.h (Plugin::filename): New method.
(Plugin::recorder): New method.
(Plugin::recorder_): New data member.
|
|
This option does not merge certain text sections with prefixes
.text.hot, .text.unlikely, .text.startup and .text.exit.
* layout.cc (Layout::default_section_order): Check for text section
prefixes.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
(Layout::output_section_name): Check for text section prefixes.
* layout.h (Output_section_order::ORDER_TEXT_HOT): New enum value.
(Output_section_order::ORDER_TEXT_STARTUP): New enum value.
(Output_section_order::ORDER_TEXT_EXIT): New enum value.
(Output_section_order::ORDER_TEXT_UNLIKELY): New enum value.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
* options.h (keep_text_section_prefix): New -z option.
* testsuite/Makefile.am (keep_text_section_prefix): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/keep_text_section_prefix.cc: New test source.
* testsuite/keep_text_section_prefix.sh: New test script.
|
|
2018-02-22 Sriraman Tallam <tmsriram@google.com>
* plugin.cc (get_wrap_symbols): New plugin interface.
(load): Add get_wrap_symbols to transfer vector.
* plugin-api.h (ld_plugin_get_wrap_symbols): New plugin interface.
* testsuite/plugin_test.c (onload): Call and check get_wrap_symbols
interface.
* testsuite/plugin_test_wrap_symbols.sh: New test script.
* testsuite/plugin_test_wrap_symbols_1.cc: New file.
* testsuite/plugin_test_wrap_symbols_2.cc: New file.
* testsuite/Makefile.am (plugin_test_wrap_symbols): New test.
* testsuite/Makefile.in: Regenerate.
|
|
2018-02-07 Sriraman Tallam <tmsriram@google.com>
* expression.cc (Symbol_expression::set_expr_sym_in_real_elf):
New method.
(Unary_expression::set_expr_sym_in_real_elf): New method.
(Binary_expression::set_expr_sym_in_real_elf): New method.
(Trinary_expression::set_expr_sym_in_real_elf): New method.
* plugin.cc (get_symbol_resolution_info): Fix symbol resolution if
defined or used in defsyms.
* plugin.h (Plugin_manager::is_defsym_def): New method.
(Plugin_manager::Plugin_manager): Initialize defsym_defines_set_.
(Plugin_manager::defsym_defines_set_): New member.
(Plugin_manager::Defsym_defines_set): New typedef.
* script.cc (Script_options::set_defsym_uses_in_real_elf): New method.
(Script_options::find_defsym_defs): New method.
* script.h (Expression::set_expr_sym_in_real_elf): New method.
(Symbol_assignment::is_defsym): New method.
(Symbol_assignment::value): New method.
(Script_options::find_defsym_defs): New method.
(Script_options::set_defsym_uses_in_real_elf): New method.
* testsuite/Makefile.am (plugin_test_defsym): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_test.c: Check for new symbol resolution.
* testsuite/plugin_test_defsym.sh: New script.
* testsuite/plugin_test_defsym.c: New test source.
|
|
This reverts most of commit 1be5d8d3bb.
Left in place are addition of --no-plt-align to some ppc32 ld tests
and the ld.texinfo --no-plt-thread-safe fix.
|
|
Reads the maximum_operations_per_instruction field, added in DWARF-4 to the
line number program header.
gold/
* PR gold/22776
* dwarf_reader.cc (Sized_dwarf_line_info::read_header_prolog): Add
support for DWARF-4 line number tables.
* dwarf_reader.h (Sized_dwarf_line_info::max_ops_per_insn): New field.
|
|
Asking for ppc32 plt call stubs to be aligned at 32 byte boundaries
didn't quite work. For ld.bfd they were spaced 32 bytes apart, but
only started on a 16 byte boundary. ld.gold also didn't get it right.
Finding that bug made me check over the ppc64 plt stub alignment,
where I found that negative values for alignment (meaning align to
minimize boundary crossing) were not accepted. Since no one has
complained about that, I guess I could have removed the feature from
ld.bfd documentation, but I've opted instead to correct the code.
I've also added an optional alignment paramenter for ppc32
--plt-align, for some consistency with gold and ppc64 ld.bfd.
bfd/
* elf32-ppc.c (ppc_elf_create_glink): Correct alignment of .glink.
* elf64-ppc.c (ppc64_elf_size_stubs): Handle negative plt_stub_align.
(ppc64_elf_build_stubs): Likewise.
gold/
* powerpc.cc (param_plt_align): New function supplying default
--plt-align values. Use it..
(Stub_table::plt_call_align): ..here, and..
(Output_data_glink::global_entry_align): ..here.
(Stub_table::stub_align): Correct 32-bit minimum alignment.
ld/
* emultempl/ppc32elf.em: Support optional --plt-align arg.
* emultempl/ppc64elf.em: Support negative --plt-align arg.
|
|
Spectre variant 2 mitigation for PowerPC and PowerPC64.
bfd/
* elf32-ppc.c (GLINK_ENTRY_SIZE): Handle speculation barrier.
(CRSETEQ, BEQCTRM): Define.
(is_nonpic_glink_stub): Don't check bctr.
(ppc_elf_link_hash_table_create): Init new ppc_elf_params field.
(ppc_elf_relax_section): Size speculation barrier.
(output_bctr): New function.
(write_glink_stub): Use output_bctr.
(ppc_elf_relocate_section): Use output_bctr for long branch stub.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_finish_dynamic_sections): Use output_bctr.
* elf32-ppc.h (struct ppc_elf_params): Add speculate_indirect_jumps.
* elf64-ppc.c (CRSETEQ, BEQCTRM, BEQCTRLM): Define.
(GLINK_PLTRESOLVE_SIZE): Size speculation barrier.
(size_global_entry_stubs): Handle speculation barrier sizing.
(plt_stub_size): Likewise.
(output_bctr): New function.
(build_plt_stub, build_tls_get_addr_stub): Output speculation
barrier.
(ppc_build_one_stub): Likewise for ppc_stub_plt_branch.
(ppc_size_one_stub): Size speculation barrier in ppc_stub_plt_branch.
(build_global_entry_stubs): Output speculation barrier.
(ppc64_elf_build_stubs): Likewise in __glink_PLTresolve stub.
* elf64-ppc.h (struct ppc64_elf_params): Add speculate_indirect_jumps.
gold/
* options.h (speculate_indirect_jumps): New option.
* powerpc.cc (beqctrm, beqctrlm, crseteq): New insn constants.
(output_bctr): New function.
(Stub_table::plt_call_size): Add space for speculation barrier.
(Stub_table::branch_stub_size): Likewise.
(Output_data_glink::pltresolve_size): Likewise.
(Stub_table::do_write): Output speculation barriers.
ld/
* emultempl/ppc32elf.em (params): Init new field.
(OPTION_SPECULATE_INDIRECT_JUMPS): Define.
(OPTION_NO_SPECULATE_INDIRECT_JUMPS): Define.
(PARSE_AND_LIST_LONGOPTS): Handle new options.
(PARSE_AND_LIST_ARGS_CASES): Likewise.
(PARSE_AND_LIST_OPTIONS): Likewise.
* emultempl/ppc64elf.em (params): Init new field.
(OPTION_SPECULATE_INDIRECT_JUMPS): Define.
(OPTION_NO_SPECULATE_INDIRECT_JUMPS): Define.
(PARSE_AND_LIST_LONGOPTS): Handle --speculate-indirect-jumps.
(PARSE_AND_LIST_OPTIONS): Likewise.
(PARSE_AND_LIST_ARGS_CASES): Likewise.
* ld.texinfo (--no-plt-thread-safe): Correct itemx.
(--speculate-indirect-jumps): Document.
* testsuite/ld-powerpc/elfv2exe.d,
* testsuite/ld-powerpc/elfv2so.d,
* testsuite/ld-powerpc/relbrlt.d,
* testsuite/ld-powerpc/powerpc.exp: Disable plt alignment and
speculation barriers on various tests.
|
|
This is in preparation for the next patch adding Spectre variant 2
mitigation for PowerPC and PowerPC64. Besides tidying code involved
in stub output (to reduce the number of places where bctr is output),
the patch adds some user visible features:
1) PowerPC64 ELFv2 global entry stubs now are aligned under the
control of --plt-align, with a default alignment of 32 bytes.
2) PowerPC64 __glink_PLTresolve is no longer padded out with nops.
3) PowerPC32 PLT stubs are aligned under the control of --plt-align,
with the default alignment being 16 bytes as before.
4) The PowerPC32 branch/nop table emitted before __glink_PLTresolve
is now smaller in many cases. It was sized incorrectly when the
__tls_get_addr_opt stub was used, and unnecessarily included space
for local ifuncs.
bfd/
* elf32-ppc.c (GLINK_ENTRY_SIZE): Add parameters, handle
__tls_get_addr_opt, and alignment sizing.
(TLS_GET_ADDR_GLINK_SIZE): Delete.
(is_nonpic_glink_stub): Don't use GLINK_ENTRY_SIZE.
(ppc_elf_get_synthetic_symtab): Recognize stubs spaced at 4, 6,
or 8 insns.
(ppc_elf_link_hash_table_create): Init new ppc_elf_params field.
(allocate_dynrelocs): Use new GLINK_ENTRY_SIZE.
(ppc_elf_size_dynamic_sections): Likewise. Size branch table
by PLT reloc count.
(write_glink_stub): Handle __tls_get_addr_opt stub.
Pad out to size given by GLINK_ENTRY_SIZE.
(ppc_elf_relocate_section): Adjust write_glink_stub call.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_finish_dynamic_sections): Write PLTresolve without using
insn array since so many need rewriting.
* elf32-ppc.h (struct ppc_elf_params): Add plt_stub_align.
* elf64-ppc.c (GLINK_PLTRESOLVE_SIZE): Rename from
GLINK_CALL_STUB_SIZE. Add htab param and evaluate to size without
nops. Adjust all uses.
(ppc64_elf_get_synthetic_symtab): Don't use GLINK_CALL_STUB_SIZE
in glink_vma calculation.
(struct ppc_link_hash_table): Add global_entry section pointer.
(create_linkage_sections): Create separate section for global
entry stubs.
(PPC_LO, PPC_HI, PPC_HA): Move earlier.
(size_global_entry_stubs): Handle sizing for aligned stubs.
(ppc64_elf_size_dynamic_sections): Handle global_entry alloc,
and don't stash end of glink branch table in rawsize.
(ppc_build_one_stub): Rewrite stub size calculations.
(build_global_entry_stubs): Use new section.
(ppc64_elf_build_stubs): Don't pad __glink_PLTresolve with nops.
Build lazy link stubs out to end of section. Build global entry
stubs in new section.
gold/
* options.h (plt_align): Support for PowerPC32 too.
* powerpc.cc (Stub_table::stub_align): Heed --plt-align for 32-bit.
(Stub_table::plt_call_size, branch_stub_size): Tidy.
(Stub_table::plt_call_align): Implement using stub_align.
(Output_data_glink::global_entry_align): New function.
(Output_data_glink::global_entry_off): New function.
(Output_data_glink::global_entry_address): Use global_entry_off.
(Output_data_glink::pltresolve_size): New function, replacing
pltresolve_size_ constant. Update all uses.
(Output_data_glink::add_global_entry): Align offset.
(Output_data_glink::set_final_data_size): Use global_entry_align.
(Stub_table::do_write): Don't pad __glink_PLTrelsolve with nops.
Tidy stub output. Use global_entry_off.
ld/
* emultempl/ppc32elf.em (params): Init new field.
(enum ppc32_opt): New enum to define OPTION_* values. Add
OPTION_PLT_ALIGN and OPTION_NO_PLT_ALIGN.
(PARSE_AND_LIST_LONGOPTS): Handle new options.
(PARSE_AND_LIST_ARGS_CASES): Likewise.
(PARSE_AND_LIST_OPTIONS): Likewise. Break up help output.
* emultempl/ppc64elf.em (ppc_add_stub_section): Init alignment
correctly for negative --plt-stub-align.
* testsuite/ld-powerpc/elfv2exe.d,
* testsuite/ld-powerpc/elfv2so.d,
* testsuite/ld-powerpc/relbrlt.d,
* testsuite/ld-powerpc/relbrlt.s,
* testsuite/ld-powerpc/tlsexe.d,
* testsuite/ld-powerpc/tlsexe.r,
* testsuite/ld-powerpc/tlsexe32.d,
* testsuite/ld-powerpc/tlsexe32.g,
* testsuite/ld-powerpc/tlsexe32.r,
* testsuite/ld-powerpc/tlsexetoc.d,
* testsuite/ld-powerpc/tlsexetoc.r,
* testsuite/ld-powerpc/tlsopt5_32.d,
* testsuite/ld-powerpc/tlsso.d,
* testsuite/ld-powerpc/tlstocso.d: Update for changed stub order.
|
|
PR 22042 complained that garbage text was being printed in the help
for the -fuse-ld option; this was caused by passing an empty string
to the gettext() function, which sometimes returns garbage when passed
an empty string. The quick fix was to replace "" with NULL as the helparg,
but that changed the parsing of the option, as gold uses the helparg to
determine whether an option takes an argument. This patch adds a
non-empty helparg string to fix both problems.
gold/
PR gold/22694
* options.h (-fuse-ld): Add correct helparg.
|
|
|
|
|
|
|
|
gold/
* NEWS: Add new features in 1.15.
* version.cc (version_string): Bump to 1.15.
|
|
2018-01-12 Sterling Augustine <saugustine@google.com>
* cref.cc (Cref_inputs::Cref_table_compare::operator): Add
conditionals and calls to is_forwarder.
|
|
|
|
|
|
We never need to resolve_forwards() a symbol found by hash table lookup
such as target->tls_get_addr_opt() but we do potentially need to do so
for random symbols seen on relocs. So these calls were in the wrong
order, resulting in missing stubs and an assertion failure.
PR 22602
* powerpc.cc (Target_powerpc::Branch_info::mark_pltcall): Resolve
forwards before replacing __tls_get_addr.
(Target_powerpc::Branch_info::make_stub): Likewise.
|
|
Gold plugins may wish to further process an input file added by a plugin. For
example, the plugin may need to assign a unique segment for sections in a
plugin-generated input file. This patch adds a plugin callback that the linker
will call when reading symbols from a new input file added after the
all_symbols_read event (i.e. an input file added by a plugin).
2017-12-11 Stephen Crane <sjc@immunant.com>
* plugin-api.h: Add new plugin hook to allow processing of input
files added by a plugin.
(ld_plugin_new_input_handler): New function hook type.
(ld_plugin_register_new_input): New interface.
(LDPT_REGISTER_NEW_INPUT_HOOK): New enum val.
(tv_register_new_input): New member.
* plugin.cc (Plugin::load): Include hooks for register_new_input
in transfer vector.
(Plugin::new_input): New function.
(register_new_input): New function.
(Plugin_manager::claim_file): Call Plugin::new_input if in
replacement phase.
* plugin.h (Plugin::set_new_input_handler): New function.
* testsuite/plugin_new_section_layout.c: New plugin to test
new_input plugin API.
* testsuite/plugin_final_layout.sh: Add new input test.
* testsuite/Makefile.am (plugin_layout_new_file): New test case.
* testsuite/Makefile.in: Regenerate.
|
|
2017-12-02 Vladimir Kondratyev <vladimir@kondratyev.su>
Cary Coutant <ccoutant@gmail.com>
gold/
PR gold/22540
* output.cc (gold_fallocate): Trivial return for len == 0.
Add fallback options when posix_fallocate and fallocate return
not-supported errors.
|
|
This is a partial fix for the gold testsuite failures documented in
PR 21090. The use of -fpie triggers some mov-to-lea optimizations that
are not compatible with incremental linking, so those optimizations need
to be disabled. We also diagnose the attempt to use -pie with incremental
linking, and force -no-pie for the incremental tests in case the build has
been configured to have GCC pass -pie all the time.
We still have a problem where compiling with -fpie results in some GOT
entries even when linking with -no-pie. This combination still causes test
failures because we are not updating the GOT entries in an incremental update
link.
gold/
PR gold/21090
* incremental.cc (Sized_relobj_incr::do_relocate): Fix comment.
* options.cc (General_options::finalize): Disallow -pie with
incremental linking.
* x86_64.cc (Target_x86_64::Scan::local): Don't do mov-to-lea
or callq-to-direct optimizations for incremental links.
(Target_x86_64::Scan::global): Likewise.
(Target_x86_64::Relocate::relocate): Likewise.
* testsuite/Makefile.am (incremental_test): Force -no-pie.
(incremental_test_2): Likewise.
(incremental_test_3): Likewise.
(incremental_test_4): Likewise.
(incremental_test_5): Likewise.
(incremental_test_6): Likewise.
(incremental_copy_test): Likewise.
(incremental_common_test_1): Likewise.
(incremental_comdat_test_1): Likewise.
* testsuite/Makefile.in: Regenerate.
|
|
gold/
PR gold/21841
* testsuite/debug_msg.sh: Adjust expected line numbers.
* testsuite/odr_violation2.cc (DummyFunction): New function.
|
|
With the new compiler, we're running out of patch space for the .eh_frame
section. To workaround that issue, we compile the before and after versions
both with no unwind tables.
gold/
PR gold/22309
* testsuite/Makefile.am (two_file_test_1_v1_ndebug.o): Compile with
no EH information.
(two_file_test_1_ndebug.o): Likewise.
* testsuite/Makefile.in: Regenerate.
* testsuite/two_file_test_1.cc: Touch to force recompilation with new
flags.
* testsuite/two_file_test_1_v1.cc: Likewise.
|
|
gold/
PR gold/22042
* options.h (-fuse-ld): Use NULL instead of empty string.
|
|
The problem is that while the command line isn't trivially empty,
it contains no input files. As gold tries to configure the number
of threads to use based on the number of input files, this causes
the assertion failure above. Fix this problem by making the logic
in gold.cc more robust and also adding a better error message
about --start-lib to options.cc.
gold/
PR gold/22406
* gold.cc (queue_initial_tasks) Check for number of real input files.
* options.cc (Command_line::process) Check for unterminated --start-lib
options.
* testsuite/Makefile.am: Add new test script.
* testsuite/Makefile.in: Regenerate.
* testsuite/check_empty_command_lines.sh: New test script.
|
|
If a shared library contains an undefined symbol and LTO adds
a new reference to that same undefined symbol, the reference in the new
object added by the plugin would not trigger a rescan of the archive
containing the symbol.
2017-11-17 Stephen Crane <sjc@immunant.com>
gold/
PR gold/22448
* symtab.cc (Symbol_table::add_from_object): Only rescan for
undefined symbols in regular, not dynamic, objects.
|
|
The addresses of erratum stubs can be changed by relaxation passes, and
need to be updated.
gold/
PR gold/20765
* aarch64.cc (Aarch64_relobj::update_erratum_address): New method.
(AArch64_relobj::scan_errata): Update addresses in stub table after
relaxation pass.
|
|
I checked over the results of applying --fix-cortex-a53-843419 to
a very large program (gitit) with two stub tables and thousands
of erratum fixes. I noticed that all the erratum_stubs were being
created but about 1/3 of them were being skipped over by
fix_errata_and_relocate_erratum_stubs(). By skipped over I mean
no branch relocation or adrp -> adr transformation was applied to
the erratum address, leaving the erratum_stub unreachable, and
with a branch with a 0 immediate.
The root cause of the skipped over erratum_stubs is
Erratum_stub::invalidate_erratum_stub() that is used to set
relobj_ to NULL when an erratum_stub has been processed.
Unfortunately relobj_ is used in operator<() so altering relobj
makes the results from erratum_stubs_.lower_bound() as used in
find_erratum_stubs_for_input_section() unreliable.
2017-11-30 Peter Smith <peter.smith@linaro.org>
Cary Coutant <ccoutant@gmail.com>
gold/
PR gold/20765
* aarch64.cc (Erratum_stub::invalidate_erratum_stub): Use erratum_insn_
instead of relobj_ to invalidate the stub.
(Erratum_stub::is_invalidated_erratum_stub): Likewise.
|
|
The fix for PR21868 (an internal error when --fix-cortex-a53-843419
is applied) has a small mistake in it. When the stub_owner section
needs an erratum fix an incorrect address for the stubs for the section
is given to relocate_erratum_stub. If we are lucky we will get a segfault;
if we aren't, an incorrect patch or data corruption is possible.
The error is visible in PR21868, but the side-effects aren't fatal.
gold/
PR gold/22233
* aarch64.cc (AArch64_relobj::fix_errata_and_relocate_erratum_stubs):
Fix calculation of stub address.
|
|
bfd/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
binutils/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gas/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gold/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gprof/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
ld/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
opcodes/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
|
|
gold/
* resolve.cc (Symbol_table::resolve): Allow multiply-defined absolute
symbols when they have the same value.
|
|
LLVM is experimenting with placing .eh_frame sections in the COMDAT group
with the function's text. This triggers an internal error in gold because
we don't expect to see but one .eh_frame section in an object, and we use
a single data member in class Sized_relobj_file to keep track of that section.
This patch removes that data member, and instead checks the output section
and the input section offset to identify an optimized .eh_frame section.
gold/
* object.h (class Sized_relobj_file): Remove discarded_eh_frame_shndx_.
* object.cc (Sized_relobj_file::Sized_relobj_file): Likewise.
(Sized_relobj_file::layout_eh_frame_section): Likewise.
(Sized_relobj_file::do_count_local_symbols): Check for optimized
.eh_frame section by other means.
(Sized_relobj_file::compute_final_local_value_internal): Likewise.
|
|
This patch fixes the build with GCC 4.2:
gold/testsuite/pr22266_a.c:13:2: error: no newline at end of file
* testsuite/pr22266_a.c: Add a newline at end of file.
|
|
The fix for PR 19291 broke some other cases where -r is used with scripts,
as reported in PR 22266. The original fix for PR 22266 ended up breaking
many cases for REL targets, where the addends are stored in the section data,
and are not being adjusted properly.
The problem was basically that in a relocatable output file (ET_REL),
symbol values are supposed to be relative to the start address of their
section. Usually in a relocatable file, all sections start at 0, so the
failure to get this right is often irrelevant, but with a linker script,
we occasionally see an output section whose starting address is not 0,
and gold would occasionally write a symbol with its relocated value instead
of its section-relative value.
This patch reverts the recent fix for PR 22266 as well as my original fix
for PR 19291. The original fix moved the symbol value adjustment to
write_local_symbols, but neglected to undo a few places where the adjustment
was also being applied, resulting in an occasional double adjustment. The
more recent fix removed those other adjustments, but then failed to
re-account for the adjustment when rewriting the relocations on REL targets.
With the old attempts reverted, we now apply the symbol value adjustment to
the one case that had been missed (non-section symbols in merge sections).
But now we also need to account for the adjustment when rewriting the addends
for RELA relocations.
gold/
PR gold/19291
PR gold/22266
* object.cc (Sized_relobj_file::compute_final_local_value_internal):
Revert changes from 2017-11-08 patch. Adjust symbol value in
relocatable links for non-section symbols.
(Sized_relobj_file::compute_final_local_value): Revert changes from
2017-11-08 patch.
(Sized_relobj_file::do_finalize_local_symbols): Likewise.
(Sized_relobj_file::write_local_symbols): Revert changes from
2015-11-25 patch.
* object.h (Sized_relobj_file::compute_final_local_value_internal):
Revert changes from 2017-11-08 patch.
* powerpc.cc (Target_powerpc::relocate_relocs): Adjust addend for
relocatable links.
* target-reloc.h (relocate_relocs): Adjust addend for relocatable links.
* testsuite/pr22266_a.c (hello): New function.
* testsuite/pr22266_main.c (main): Add test for merge sections.
* testsuite/pr22266_script.t: Add rule for .rodata.
|
|
|
|
2017-11-19 Ian Lance Taylor <iant@google.com>
Cary Coutant <ccoutant@gmail.com>
gold/
* gold/dwarf_reader.h (class Dwarf_info_reader): Add ref_addr_size
method.
* gold/dwarf_reader.cc (Dwarf_die::read_attributes): Use ref_addr_size
for DW_FORM_ref_addr_size.
(Dwarf_die::skip_attributes): Likewise.
|
