aboutsummaryrefslogtreecommitdiff
path: root/gdbserver
AgeCommit message (Collapse)AuthorFilesLines
2021-03-22gdbserver: convert the global dll list into a process_info fieldTankut Baris Aktemur6-20/+70
The 'all_dlls' list is global. This would cause the complete dll list to be reported for individual processes. Move the list into the process_info struct. Currently the dll list is used only by the win32-low target, which does not support the multi-process feature. Therefore, it practically does not matter whether the list is global or per-process. However, there may be targets that are outside the binutils-gdb repo (e.g. we, at Intel, have such a target) that have multi-process and use the dll list. So, it makes sense to do the right thing. gdbserver/ChangeLog: 2021-03-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * inferiors.h (struct process_info) <all_dlls, dlls_changed>: New fields. * dll.h (loaded_dll) (unloaded_dll): Declare an overloaded version that takes a proc parameter. * dll.cc (loaded_dll) (unloaded_dll): Implement the overloaded versions. (clear_dlls): Clear all process' dll lists. (all_dlls, dlls_changed): Remove the global variables. * remote-utils.cc (prepare_resume_reply): Update to consider a dll list per proc. * server.cc (handle_qxfer_libraries): Ditto. (handle_v_attach): Ditto. (captured_main): Ditto.
2021-02-23gdbserver: linux-low: make linux_process_target::filter_event return voidSimon Marchi3-14/+21
Same as the previous patch, but for GDBserver. The return value of this method is never used, change it to return void. gdbserver/ChangeLog: * linux-low.cc (linux_process_target::filter_event): Return void. * linux-low.h (class linux_process_target) <filter_event>: Return void. Change-Id: I79e5dc04d9b21b9f01c6d675fa463d1b1a703b3a
2021-02-12Add stdio support to gdbreplayTom Tromey2-21/+45
I've been using gdbreplay to help debug an intermittent failure, and I wanted it to be a little simpler to use. This patch adds support for "-" as the "address" argument. With this patch you can do: (gdb) target remote | gdbreplay logfile - ... and not have to start gdbreplay in a separate shell. 2021-02-12 Tom Tromey <tromey@adacore.com> * gdbreplay.cc (remote_desc): Remove. (remote_desc_in, remote_desc_out): New globals. (remote_close): Update. (remote_open): Handle "-". (remote_open): Update. (logchar): Log to stderr. (expect, play): Update.
2021-02-12Minor constification in gdbreplayTom Tromey2-2/+6
I noticed a spot in gdbreplay where "const" could be used. 2021-02-12 Tom Tromey <tromey@adacore.com> * gdbreplay.cc (remote_open): Constify.
2021-02-05gnulib: update to 776af40e0Paul E. Murphy3-1/+12
This fixes PR27184, a failure to compile gdb due to cdefs.h being out of sync with glibc on ppc64le targets which are compiled with -mabi=ieeelongdouble and glibc 2.32. Likewise, update usage of _GL_ATTRIBUTE_FORMAT_PRINTF to _GL_ATTRIBUTE_FORMAT_PRINTF_STANDARD. Likewise, disable newly added rpl_free gnulib api in gdbserver support libraries. Likewise, undefine read/write macros before redefining them on mingw targets. Likewise, wrap C++ usage of free with GNULIB_NAMESPACE namespace as needed. Change-Id: I86517613c0d8ac8f5ea45bbc4ebe2b54a3aef29f
2021-02-03gdbserver: spurious SIGTRAP w/ detach while step-over in progressPedro Alves2-1/+33
A following patch will add a new testcase that has two processes, each with a number of threads constantly tripping a breakpoint and stepping over it, because the breakpoint has a condition that evals false. Then GDB detaches from one of the processes, while both processes are running. And then the testcase sends a SIGUSR1 to the other process. When run against gdbserver, that would occasionaly fail like this: (gdb) PASS: gdb.threads/detach-step-over.exp: iter 1: detach Executing on target: kill -SIGUSR1 208303 (timeout = 300) spawn -ignore SIGHUP kill -SIGUSR1 208303 Thread 2.5 "detach-step-ove" received signal SIGTRAP, Trace/breakpoint trap. [Switching to Thread 208303.208305] 0x000055555555522a in thread_func (arg=0x0) at /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.threads/detach-step-over.c:54 54 counter++; /* Set breakpoint here. */ What happened was that GDBserver is doing a step-over for process A when a detach request for process B arrives. And that generates a spurious SIGTRAP report for process A, as seen above. The GDBserver logs reveal what happened: - GDB manages to detach while a step over is in progress. That reaches linux_process_target::complete_ongoing_step_over(), which does: /* Passing NULL_PTID as filter indicates we want all events to be left pending. Eventually this returns when there are no unwaited-for children left. */ ret = wait_for_event_filtered (minus_one_ptid, null_ptid, &wstat, __WALL); As the comment say, this leaves all events pending, _including_ the just finished step SIGTRAP. We never discard that SIGTRAP. So GDBserver reports the SIGTRAP to GDB. GDB can't explain the SIGTRAP, so it reports it to the user. The GDBserver log looks like this. The LWP of interest is 208305: Need step over [LWP 208305]? yes, found breakpoint at 0x555555555227 proceed_all_lwps: found thread 208305 needing a step-over Starting step-over on LWP 208305. Stopping all threads 208305 starts a step-over. >>>> entering void linux_process_target::stop_all_lwps(int, lwp_info*) stop_all_lwps (stop-and-suspend, except=LWP 208303.208305) Sending sigstop to lwp 208303 Sending sigstop to lwp 207755 wait_for_sigstop: pulling events LWFE: waitpid(-1, ...) returned 207755, ERRNO-OK LLW: waitpid 207755 received Stopped (signal) (stopped) pc is 0x7f7e045593bf Expected stop. LLW: SIGSTOP caught for LWP 207755.207755 while stopping threads. LWFE: waitpid(-1, ...) returned 208303, ERRNO-OK LLW: waitpid 208303 received Stopped (signal) (stopped) pc is 0x7ffff7e743bf Expected stop. LLW: SIGSTOP caught for LWP 208303.208303 while stopping threads. LWFE: waitpid(-1, ...) returned 0, ERRNO-OK leader_pid=208303, leader_lp!=NULL=1, num_lwps=11, zombie=0 leader_pid=207755, leader_lp!=NULL=1, num_lwps=11, zombie=0 LLW: exit (no unwaited-for LWP) stop_all_lwps done, setting stopping_threads back to !stopping <<<< exiting void linux_process_target::stop_all_lwps(int, lwp_info*) Done stopping all threads for step-over. pc is 0x555555555227 Writing 8b to 0x555555555227 in process 208305 Could not findsigchld_handler fast tracepoint jump at 0x555555555227 in list (uninserting). pending reinsert at 0x555555555227 step from pc 0x555555555227 Resuming lwp 208305 (step, signal 0, stop expected) <<<< exiting ptid_t linux_process_target::wait_1(ptid_t, target_waitstatus*, target_wait_flags) handling possible serial event getpkt ("D;32b8b"); [no ack sent] The detach request arrives. sigchld_handler Tracing is already off, ignoring detach: step over in progress, finish it first GDBserver realizes a step over for 208305 was in progress, let's it finish. LWFE: waitpid(-1, ...) returned 208305, ERRNO-OK LLW: waitpid 208305 received Stopped (signal) (stopped) pc is 0x555555555227 Expected stop. LLW: step LWP 208303.208305, 0, 0 (discard delayed SIGSTOP) pending reinsert at 0x555555555227 step from pc 0x555555555227 Resuming lwp 208305 (step, signal 0, stop not expected) LWFE: waitpid(-1, ...) returned 0, ERRNO-OK leader_pid=208303, leader_lp!=NULL=1, num_lwps=11, zombie=0 leader_pid=207755, leader_lp!=NULL=1, num_lwps=11, zombie=0 sigsuspend'ing LWFE: waitpid(-1, ...) returned 208305, ERRNO-OK LLW: waitpid 208305 received Trace/breakpoint trap (stopped) pc is 0x55555555522a CSBB: LWP 208303.208305 stopped by trace LWFE: waitpid(-1, ...) returned 0, ERRNO-OK leader_pid=208303, leader_lp!=NULL=1, num_lwps=11, zombie=0 leader_pid=207755, leader_lp!=NULL=1, num_lwps=11, zombie=0 LLW: exit (no unwaited-for LWP) Finished step over. The step-over for 208305 finishes. Writing cc to 0x555555555227 in process 208305 Could not find fast tracepoint jump at 0x555555555227 in list (reinserting). >>>> entering void linux_process_target::stop_all_lwps(int, lwp_info*) stop_all_lwps (stop, except=none) wait_for_sigstop: pulling events The detach proceeds (snipped). ... proceed_one_lwp: lwp 208305 LWP 208305 has pending status, leaving stopped Later on, 208305 has a pending status (the step SIGTRAP from the step-over), so GDBserver starts the process of reporting it. ... wait_1 ret = LWP 208303.208305, 1, 5 <<<< exiting ptid_t linux_process_target::wait_1(ptid_t, target_waitstatus*, target_wait_flags) ... and eventually GDB receives the stop notification (T05 == SIGTRAP): getpkt ("vStopped"); [no ack sent] sigchld_handler vStopped: acking 3 Writing resume reply for LWP 208303.208305:1 putpkt ("$T0506:f0ee58f7ff7f0* ;07:f0ee58f7ff7f0* ;10:2a525*"550* ;thread:p32daf.32db1;core:c;#37"); [noack mode] From the GDB side, we see: [infrun] fetch_inferior_event: enter [infrun] fetch_inferior_event: fetch_inferior_event enter [infrun] do_target_wait: Found 2 inferiors, starting at #1 [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) = [infrun] print_target_wait_results: 208303.208305.0 [Thread 208303.208305], [infrun] print_target_wait_results: status->kind = stopped, signal = GDB_SIGNAL_TRAP [infrun] handle_inferior_event: status->kind = stopped, signal = GDB_SIGNAL_TRAP [infrun] start_step_over: enter [infrun] start_step_over: stealing global queue of threads to step, length = 6 [infrun] operator(): putting back 6 threads to step in global queue [infrun] start_step_over: exit [infrun] handle_signal_stop: context switch [infrun] context_switch: Switching context from process 0 to Thread 208303.208305 [infrun] handle_signal_stop: stop_pc=0x55555555522a [infrun] handle_signal_stop: random signal (GDB_SIGNAL_TRAP) [infrun] stop_waiting: stop_waiting [infrun] stop_all_threads: starting The fix is to discard the step SIGTRAP, unless GDB wanted the thread to step. gdbserver/ChangeLog: * linux-low.cc (linux_process_target::complete_ongoing_step_over): Discard step SIGTRAP, unless GDB wanted the thread to step.
2021-02-03Fix a couple vStopped pending ack bugsPedro Alves2-0/+14
A following patch will add a testcase that has two processes with threads stepping over a breakpoint continuously, and then detaches from one of the processes while threads are running. The other process continues stepping over its breakpoint. And then the testcase sends a SIGUSR1, expecting that GDB reports it. That would sometimes hang against gdbserver, due to the bugs fixed here. Both bugs are related, in that they're about remote protocol asynchronous Stop notifications. There's a bug in GDB, and another in GDBserver. The GDB bug: - when we detach from a process, the remote target discards any pending RSP notification related to that process, including the in-flight, yet-unacked notification. Discarding the in-flight notification is the problem. Until the in-flight notification is acked with a vStopped packet, the server won't send another %Stop notification. As a result, the debug session gets messed up. In the new testcase's case, GDB would hang inside stop_all_threads, waiting for a stop for one of the process'es threads, which never arrived -- its stop reply was permanently stuck in the stop reply queue, waiting for a vStopped packet that never arrived. In summary: 1. GDBserver sends stop notification about thread X, the remote target receives it and stores it 2. At the same time, GDB detaches thread X's inferior 3. The remote target discards the received stop notification 4. GDBserver waits forever for the ack The GDBserver bug: GDBserver has the opposite bug. It also discards notifications for the process being detached. If that discards the head of the notification queue, when gdb sends an ack, it ends up acking the _next_ notification. Meaning, gdb loses one notification. In the testcase, this results in a similar hang in stop_all_threads. So we have two very similar bugs in GDB and GDBserver, both resulting in a similar symptom. That's why I'm fixing them both at the same time. gdb/ChangeLog: * remote.c (remote_notif_stop_ack): Don't error out on TARGET_WAITKIND_IGNORE; instead, just ignore the notification. (remote_target::discard_pending_stop_replies): Don't delete in-flight notification; instead, clear its contents. gdbserver/ChangeLog: * server.cc (discard_queued_stop_replies): Don't ever discard the notification at the head of the list.
2021-01-20gdb: make some variables staticSimon Marchi6-15/+27
I'm trying to enable clang's -Wmissing-variable-declarations warning. This patch fixes all the obvious spots where we can simply add "static" (at least, found when building on x86-64 Linux). gdb/ChangeLog: * aarch64-linux-tdep.c (aarch64_linux_record_tdep): Make static. * aarch64-tdep.c (tdesc_aarch64_list, aarch64_prologue_unwind, aarch64_stub_unwind, aarch64_normal_base, ): Make static. * arm-linux-tdep.c (arm_prologue_unwind): Make static. * arm-tdep.c (struct frame_unwind): Make static. * auto-load.c (auto_load_safe_path_vec): Make static. * csky-tdep.c (csky_stub_unwind): Make static. * gdbarch.c (gdbarch_data_registry): Make static. * gnu-v2-abi.c (gnu_v2_abi_ops): Make static. * i386-netbsd-tdep.c (i386nbsd_mc_reg_offset): Make static. * i386-tdep.c (i386_frame_setup_skip_insns, i386_tramp_chain_in_reg_insns, i386_tramp_chain_on_stack_insns): Make static. * infrun.c (observer_mode): Make static. * linux-nat.c (sigchld_action): Make static. * linux-thread-db.c (thread_db_list): Make static. * maint-test-options.c (maintenance_test_options_list): * mep-tdep.c (mep_csr_registers): Make static. * mi/mi-cmds.c (struct mi_cmd_stats): Remove struct type name. (stats): Make static. * nat/linux-osdata.c (struct osdata_type): Make static. * ppc-netbsd-tdep.c (ppcnbsd_reg_offsets): Make static. * progspace.c (last_program_space_num): Make static. * python/py-param.c (struct parm_constant): Remove struct type name. (parm_constants): Make static. * python/py-record-btrace.c (btpy_list_methods): Make static. * python/py-record.c (recpy_gap_type): Make static. * record.c (record_goto_cmdlist): Make static. * regcache.c (regcache_descr_handle): Make static. * registry.h (DEFINE_REGISTRY): Make definition static. * symmisc.c (std_in, std_out, std_err): Make static. * top.c (previous_saved_command_line): Make static. * tracepoint.c (trace_user, trace_notes, trace_stop_notes): Make static. * unittests/command-def-selftests.c (nr_duplicates, nr_invalid_prefixcmd, lists): Make static. * unittests/observable-selftests.c (test_notification): Make static. * unittests/optional/assignment/1.cc (counter): Make static. * unittests/optional/assignment/2.cc (counter): Make static. * unittests/optional/assignment/3.cc (counter): Make static. * unittests/optional/assignment/4.cc (counter): Make static. * unittests/optional/assignment/5.cc (counter): Make static. * unittests/optional/assignment/6.cc (counter): Make static. gdbserver/ChangeLog: * ax.cc (bytecode_address_table): Make static. * debug.cc (debug_file): Make static. * linux-low.cc (stopping_threads): Make static. (step_over_bkpt): Make static. * linux-x86-low.cc (amd64_emit_ops, i386_emit_ops): Make static. * tracepoint.cc (stop_tracing_bkpt, flush_trace_buffer_bkpt, alloced_trace_state_variables, trace_buffer_ctrl, tracing_start_time, tracing_stop_time, tracing_user_name, tracing_notes, tracing_stop_note): Make static. Change-Id: Ic1d8034723b7802502bda23770893be2338ab020
2021-01-20[gdb/server] Don't overwrite fs/gs_base with -m32Tom de Vries2-22/+38
Consider a minimal test-case test.c: ... int main (void) { return 0; } ... compiled with -m32: ... $ gcc test.c -m32 ... When running the exec using gdbserver on openSUSE Factory (currently running a linux kernel version 5.10.5): ... $ gdbserver localhost:12345 a.out ... to which we connect in a gdb session, we run into a segfault in the inferior: ... $ gdb -batch -q -ex "target remote localhost:12345" -ex continue Program received signal SIGSEGV, Segmentation fault. 0xf7dd8bd2 in init_cacheinfo () at ../sysdeps/x86/cacheinfo.c:761 ... The segfault is caused by gdbserver overwriting $gs_base with 0 using PTRACE_SETREGS. After it is overwritten, the next use of $gs in the inferior will trigger the segfault. Before linux kernel version 5.9, the value used by PTRACE_SETREGS for $gs_base was ignored, but starting version 5.9, the linux kernel has support for intel architecture extension FSGSBASE, which allows users to modify $gs_base, and consequently PTRACE_SETREGS can no longer ignore the $gs_base value. The overwrite of $gs_base with 0 is done by a memset in x86_fill_gregset, which was added in commit 9e0aa64f551 "Fix gdbserver qGetTLSAddr for x86_64 -m32". The memset intends to zero-extend 32-bit registers that are tracked in the regcache to 64-bit when writing them into the PTRACE_SETREGS data argument. But in addition, it overwrites other registers that are not tracked in the regcache, such as $gs_base. Fix the segfault by redoing the fix from commit 9e0aa64f551 in minimal form. Tested on x86_64-linux: - openSUSE Leap 15.2 (using kernel version 5.3.18): - native - gdbserver -m32 - -m32 - openSUSE Factory (using kernel version 5.10.5): - native - m32 gdbserver/ChangeLog: 2021-01-20 Tom de Vries <tdevries@suse.de> * linux-x86-low.cc (collect_register_i386): New function. (x86_fill_gregset): Remove memset. Use collect_register_i386.
2021-01-07[gdb/build] Fix gdbserver build with -fsanitize=addressTom de Vries2-2/+18
When doing a gdbserver build with CFLAGS/CXXFLAGS/LDFLAGS=-fsanitize=address we run into: ... ld: ../libiberty/libiberty.a(safe-ctype.o): relocation R_X86_64_32 against `.data' can not be used when making a shared object; recompile with -fPIC collect2: error: ld returned 1 exit status make[1]: *** [libinproctrace.so] Error 1 ... This started with commit 96648494173 "gdbsupport: make use of safe-ctype functions from libiberty", which introduced a dependency of libinproctrace.so on libiberty. Fix this in gdbserver/Makefile.in by using a setup similar to what is done in gcc-repo/src/libcc1/Makefile.am, such that ../libiberty/noasan/libiberty.a is used instead. Build on x86_64-linux, both with and without -fsanitize=address. gdbserver/ChangeLog: 2021-01-07 Tom de Vries <tdevries@suse.de> * Makefile.in (LIBIBERTY_NORMAL, LIBIBERTY_NOASAN, LIBIBERTY_PIC): (LIBIBERTY_FOR_SHLIB): New var. (LIBIBERTY): Set using $(LIBIBERTY_NORMAL). (IPA_LIB): Use LIBIBERTY_FOR_SHLIB instead of LIBIBERTY in target rule.
2021-01-04gdb: introduce scoped debug printsSimon Marchi2-0/+8
I spent a lot of time reading infrun debug logs recently, and I think they could be made much more readable by being indented, to clearly see what operation is done as part of what other operation. In the current format, there are no visual cues to tell where things start and end, it's just a big flat list. It's also difficult to understand what caused a given operation (e.g. a call to resume_1) to be done. To help with this, I propose to add the new scoped_debug_start_end structure, along with a bunch of macros to make it convenient to use. The idea of scoped_debug_start_end is simply to print a start and end message at construction and destruction. It also increments/decrements a depth counter in order to make debug statements printed during this range use some indentation. Some care is taken to handle the fact that debug can be turned on or off in the middle of such a range. For example, a "set debug foo 1" command in a breakpoint command, or a superior GDB manually changing the debug_foo variable. Two macros are added in gdbsupport/common-debug.h, which are helpers to define module-specific macros: - scoped_debug_start_end: takes a message that is printed both at construction / destruction, with "start: " and "end: " prefixes. - scoped_debug_enter_exit: prints hard-coded "enter" and "exit" messages, to denote the entry and exit of a function. I added some examples in the infrun module to give an idea of how it can be used and what the result looks like. The macros are in capital letters (INFRUN_SCOPED_DEBUG_START_END and INFRUN_SCOPED_DEBUG_ENTER_EXIT) to mimic the existing SCOPE_EXIT, but that can be changed if you prefer something else. Here's an excerpt of the debug statements printed when doing "continue", where a displaced step is started: [infrun] proceed: enter [infrun] proceed: addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT [infrun] global_thread_step_over_chain_enqueue: enqueueing thread Thread 0x7ffff75a5640 (LWP 2289301) in global step over chain [infrun] start_step_over: enter [infrun] start_step_over: stealing global queue of threads to step, length = 1 [infrun] start_step_over: resuming [Thread 0x7ffff75a5640 (LWP 2289301)] for step-over [infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=1, current thread [Thread 0x7ffff75a5640 (LWP 2289301)] at 0x5555555551bd [displaced] displaced_step_prepare_throw: displaced-stepping Thread 0x7ffff75a5640 (LWP 2289301) now [displaced] prepare: selected buffer at 0x5555555550c2 [displaced] prepare: saved 0x5555555550c2: 1e fa 31 ed 49 89 d1 5e 48 89 e2 48 83 e4 f0 50 [displaced] amd64_displaced_step_copy_insn: copy 0x5555555551bd->0x5555555550c2: c7 45 fc 00 00 00 00 eb 13 8b 05 d4 2e 00 00 83 [displaced] displaced_step_prepare_throw: prepared successfully thread=Thread 0x7ffff75a5640 (LWP 2289301), original_pc=0x5555555551bd, displaced_pc=0x5555555550c2 [displaced] resume_1: run 0x5555555550c2: c7 45 fc 00 [infrun] infrun_async: enable=1 [infrun] prepare_to_wait: prepare_to_wait [infrun] start_step_over: [Thread 0x7ffff75a5640 (LWP 2289301)] was resumed. [infrun] operator(): step-over queue now empty [infrun] start_step_over: exit [infrun] proceed: start: resuming threads, all-stop-on-top-of-non-stop [infrun] proceed: resuming Thread 0x7ffff7da7740 (LWP 2289296) [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [Thread 0x7ffff7da7740 (LWP 2289296)] at 0x7ffff7f7d9b7 [infrun] prepare_to_wait: prepare_to_wait [infrun] proceed: resuming Thread 0x7ffff7da6640 (LWP 2289300) [infrun] resume_1: thread Thread 0x7ffff7da6640 (LWP 2289300) has pending wait status status->kind = stopped, signal = GDB_SIGNAL_TRAP (currently_stepping=0). [infrun] prepare_to_wait: prepare_to_wait [infrun] proceed: [Thread 0x7ffff75a5640 (LWP 2289301)] resumed [infrun] proceed: resuming Thread 0x7ffff6da4640 (LWP 2289302) [infrun] resume_1: thread Thread 0x7ffff6da4640 (LWP 2289302) has pending wait status status->kind = stopped, signal = GDB_SIGNAL_TRAP (currently_stepping=0). [infrun] prepare_to_wait: prepare_to_wait [infrun] proceed: end: resuming threads, all-stop-on-top-of-non-stop [infrun] proceed: exit We can easily see where the call to `proceed` starts and end. We can also see why there are a bunch of resume_1 calls, it's because we are resuming threads, emulating all-stop on top of a non-stop target. We also see that debug statements nest well with other modules that have been migrated to use the "new" debug statement helpers (because they all use debug_prefixed_vprintf in the end. I think this is desirable, for example we could see the debug statements about reading the DWARF info of a library nested under the debug statements about loading that library. Of course, modules that haven't been migrated to use the "new" helpers will still print without indentations. This will be one good reason to migrate them. I think the runtime cost (when debug statements are disabled) of this is reasonable, given the improvement in readability. There is the cost of the conditionals (like standard debug statements), one more condition (if (m_must_decrement_print_depth)) and the cost of constructing a stack object, which means copying a fews pointers. Adding the print in fetch_inferior_event breaks some tests that use "set debug infrun", because it prints a debug statement after the prompt. I adapted these tests to cope with it, by using the "-prompt" switch of gdb_test_multiple to as if this debug statement is part of the expected prompt. It's unfortunate that we have to do this, but I think the debug print is useful, and I don't want a few tests to get in the way of adding good debug output. gdbsupport/ChangeLog: * common-debug.h (debug_print_depth): New. (struct scoped_debug_start_end): New. (scoped_debug_start_end): New. (scoped_debug_enter_exit): New. * common-debug.cc (debug_prefixed_vprintf): Print indentation. gdb/ChangeLog: * debug.c (debug_print_depth): New. * infrun.h (INFRUN_SCOPED_DEBUG_START_END): New. (INFRUN_SCOPED_DEBUG_ENTER_EXIT): New. * infrun.c (start_step_over): Use INFRUN_SCOPED_DEBUG_ENTER_EXIT. (proceed): Use INFRUN_SCOPED_DEBUG_ENTER_EXIT and INFRUN_SCOPED_DEBUG_START_END. (fetch_inferior_event): Use INFRUN_SCOPED_DEBUG_ENTER_EXIT. gdbserver/ChangeLog: * debug.cc (debug_print_depth): New. gdb/testsuite/ChangeLog: * gdb.base/ui-redirect.exp: Expect infrun debug print after prompt. * gdb.threads/ia64-sigill.exp: Likewise. * gdb.threads/watchthreads-reorder.exp: Likewise. Change-Id: I7c3805e6487807aa63a1bae318876a0c69dce949
2021-01-01Update copyright year range in all GDB filesJoel Brobecker88-88/+88
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2021-01-01Update copyright year in version message for gdb, gdbserver and gdbreplayJoel Brobecker3-2/+7
gdb/ChangeLog: * top.c (print_gdb_version): Update copyright year. gdbserver/ChangeLog: * server.cc (gdbserver_version): Update copyright year. * gdbreplay.cc (gdbreplay_version): Likewise.
2020-12-16Fix TBI handling for watchpointsLuis Machado2-1/+28
When inserting hw watchpoints, we take care of masking off the top byte of the address (and sign-extending it if needed). This guarantees we won't pass tagged addresses to the kernel via ptrace. However, from the kernel documentation on tagged pointers... "Non-zero tags are not preserved when delivering signals. This means that signal handlers in applications making use of tags cannot rely on the tag information for user virtual addresses being maintained for fields inside siginfo_t. One exception to this rule is for signals raised in response to watchpoint debug exceptions, where the tag information will be preserved." So the stopped data address after a hw watchpoint hit can be potentially tagged, and we don't handle this in GDB at the moment. This results in GDB missing a hw watchpoint hit and attempting to step over an unsteppable hw watchpoint, causing it to spin endlessly. The following patch fixes this by adjusting the stopped data address and adds some tests to expose the problem. gdb/ChangeLog: 2020-12-16 Luis Machado <luis.machado@linaro.org> * aarch64-linux-nat.c (aarch64_linux_nat_target::stopped_data_address): Handle the TBI. gdbserver/ChangeLog: 2020-12-16 Luis Machado <luis.machado@linaro.org> * linux-aarch64-low.cc (address_significant): New function. (aarch64_target::low_stopped_data_address): Handle the TBI. gdb/testsuite/ChangeLog: 2020-12-16 Luis Machado <luis.machado@linaro.org> * gdb.arch/aarch64-tagged-pointer.c (main): Add a few more pointer-based memory accesses. * gdb.arch/aarch64-tagged-pointer.exp: Exercise additional hw watchpoint cases.
2020-12-11gdbsupport: make use of safe-ctype functions from libibertyAndrew Burgess2-1/+5
Make use of the safe-ctype replacements for the standard ctype character checking functions in gdbsupport/common-utils.cc. The gdbsupport library is included into both gdb and gdbserver, and on the gdbserver side there are two targets, gdbserver itself, and also libinproctrace.so. libiberty was already being included in the gdbserver link command, but was missing from the libinproctrace.so link. As a result, after changing gdbsupport/common-utils.cc to depend on libiberty, libinproctrace.so would no longer link until I modified its link line. gdbserver/ChangeLog: * Makefile.in (IPA_LIB): Include libiberty library. gdbsupport/ChangeLog: * gdbsupport/common-utils.cc: Change 'ctype.h' include to 'safe-ctype.h'. (extract_string_maybe_quoted): Use safe-ctype function versions. (is_digit_in_base): Likewise. (digit_to_int): Likewise. (strtoulst): Likewise. (skip_spaces): Likewise. (skip_to_space): Likewise.
2020-11-11gdbserver: add missing --disable-packet options to help textAndrew Burgess2-2/+8
The help text for the --disable-packet option was missing one of the possible values. As this option is for maintainers only it is explicitly not documented in gdb/doc/gdb.texinfo, so no update is needed there. gdbserver/ChangeLog: * server.cc (gdbserver_usage): Add missing option to usage text. (gdbserver_show_disableable): Likewise.
2020-11-02gdb, gdbserver, gdbsupport: fix leading space vs tabs issuesSimon Marchi13-32/+47
Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
2020-10-31gdbserver: replace AC_TRY_COMPILE in acinclude.m4Simon Marchi3-25/+33
... with AC_COMPILE_IFELSE and AC_LANG_PROGRAM. All changes in the generated configure file are insignificant whitespace changes. gdbserver/ChangeLog: * acinclude.m4: Replace AC_TRY_COMPILE with AC_COMPILE_IFELSE + AC_LANG_PROGRAM. * configure: Re-generate. Change-Id: Idab8b5e1a984046b5283940c02e5a22da2291d58
2020-10-31gdbsupport: replace AC_TRY_COMPILE in common.m4Simon Marchi2-4/+11
... with AC_COMPILE_IFELSE + AC_LANG_PROGRAM. All the changes in the generated configure files are insignificant whitespace changes. gdb/ChangeLog: * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdbsupport/ChangeLog: * common.m4: Replace AC_TRY_COMPILE with AC_COMPILE_IFELSE + AC_LANG_PROGRAM. * configure: Re-generate. Change-Id: Id58e6e887f6be817d52b189921845838031dbd2a
2020-10-31gdbsupport: replace AC_TRY_COMPILE in warning.m4Simon Marchi2-3/+8
Replace AC_TRY_COMPILE with AC_COMPILE_IFELSE + AC_LANG_PROGRAM. All changes in generated configure files are insignificant whitespace changes. gdb/ChangeLog: * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdbsupport/ChangeLog: * configure: Re-generate. * warning.m4: Replace AC_TRY_COMPILE with AC_COMPILE_IFELSE + AC_LANG_PROGRAM. Change-Id: I517bd20ec3af960ad999a586761df0ac8959a3fc
2020-10-31gdbsupport: replace AC_TRY_COMPILE in ptrace.m4Simon Marchi2-1/+10
Replace AC_TRY_COMPILE with AC_COMPILE_IFELSE + AC_LANG_PROGRAM. All the changes in the generated configure files are insignificant whitespace changes. gdb/ChangeLog: * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdbsupport/ChangeLog: * configure: Re-generate. * ptrace.m4: Replace AC_TRY_COMPILE with AC_COMPILE_IFELSE + AC_LANG_PROGRAM. Change-Id: Ia782b5477fe49dad04e68c0f41c6d8ab3fde5bf0
2020-10-31gdbsupport: re-indent ptrace.m4Simon Marchi2-27/+32
For some reason, autoupdate isn't able to grok ptrace.m4: $ autoupdate ptrace.m4 /usr/bin/m4:/tmp/auYjuodw/input.m4:171: ERROR: end of file in string autoupdate: /usr/bin/m4 failed with exit status: 1 Honestly, I'm unable to grok it either. This patch re-indents it in a way that I think is easier to read. With this patch applied, autoupdate becomes able to parse ptrace.m4, but I chose to keep this re-indent in a patch of its own. All the changes in generated configure files consist of insignificant whitespace changes. gdb/ChangeLog: * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdbsupport/ChangeLog: * configure: Re-generate. * ptrace.m4: Re-indent. Change-Id: Ie2afab09fecc8b6d0cccccb47ac9756f3843881e
2020-10-31gdbserver: modernize configure.acSimon Marchi3-43/+94
Run autoupdate on gdbserver/configure.ac and then tweak it to use easier to read indentation. This removes a few warnings when running `autoreconf -vf -Wall`. * Replace AC_INIT with AC_INIT and no arguments plus AC_CONFIG_SRCDIR. * Replace AC_GNU_SOURCE with AC_USE_SYSTEM_EXTENSIONS. * Replace AC_TRY_COMPILE with AC_COMPILE_IFELSE. * Replace AC_TRY_LINK with AC_LINK_IFELSE. autoupdate gets it right, except this one here: --- a/gdbserver/configure.ac +++ b/gdbserver/configure.ac @@ -304,7 +304,7 @@ if test "$srv_linux_thread_db" = "yes"; then AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[]])],[found="-Wl,--dynamic-list" RDYNAMIC='-Wl,--dynamic-list=$(srcdir)/proc-service.list'],[RDYNAMIC="-rdynamic" LDFLAGS="$old_LDFLAGS $RDYNAMIC" - AC_TRY_LINK([], [], + _au_m4_changequote([,])AC_TRY_LINK([], [], [found="-rdynamic"], [found="no" RDYNAMIC=""])]) ... which I had to convert manually. The changes in the generated configure file only contain insignificant whitespace changes, so that gives confidence that the conversion is correct. gdbserver/ChangeLog: * configure.ac: Modernize. * configure: Re-generate. Change-Id: Ia769aaec2aafac595504f477da955e91dffa4d8f
2020-10-31gdb, gdbserver, gdbsupport: use AC_CANONICAL_{BUILD,HOST,TARGET} instead of ↵Simon Marchi3-2/+19
AC_CANONICAL_SYSTEM `autoreconf -Wall` notes that AC_CANONICAL_SYSTEM is obsolete: configure.ac:36: warning: The macro `AC_CANONICAL_SYSTEM' is obsolete. Replace it by AC_CANONICAL_BUILD, AC_CANONICAL_HOST and AC_CANONICAL_TARGET in configure.ac files in gdb, gdbserver and gdbsupport. All three macros may not be needed everywhere, but it is hard to completely audit the configure files to see which are required, so I think it's better (and that there's no downside) to just call all three. gdb/ChangeLog: * configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of AC_CANONICAL_SYSTEM. * configure: Re-generate. gdbserver/ChangeLog: * configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of AC_CANONICAL_SYSTEM. * configure: Re-generate. gdbsupport/ChangeLog: * configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of AC_CANONICAL_SYSTEM. * configure: Re-generate. Change-Id: Ifd0e21f1e478634e768b5de1b8ee06a7f690d863
2020-10-26gdb::handle_eintr, remove need to specify return typePedro Alves2-5/+11
This eliminates the need to specify the return type when using handle_eintr. We let the compiler deduce it for us. Also, use lowercase for function parameter names. Uppercase should only be used on template parameters. gdb/ChangeLog: * nat/linux-waitpid.c: Include "gdbsupport/eintr.h". (my_waitpid): Use gdb::handle_eintr. gdbserver/ChangeLog: * netbsd-low.cc (netbsd_waitpid, netbsd_process_target::kill) (netbsd_qxfer_libraries_svr4): Use gdb::handle_eintr without explicit type. gdbsupport/ChangeLog: * eintr.h (handle_eintr): Replace Ret template parameter with ErrorValType. Use it as type of the failure value. Deduce the function's return type using decltype. Use lowercase for function parameter names.
2020-10-25gdb: move ptrace.m4 to gdbsupportSimon Marchi2-1/+5
ptrace.m4, providing the GDB_AC_PTRACE autoconf macro, is used by gdb, gdbserver and gdbsupport. I think it would make sense to move it to gdbsupport. gdb/ChangeLog: * acinclude.m4: Update ptrace.m4 path. * ptrace.m4: Moved to gdbsupport. gdbserver/ChangeLog: * acinclude.m4: Update ptrace.m4 path. gdbsupport/ChangeLog: * Makefile.in: Re-generate. * acinclude.m4: Update ptrace.m4 path. * ptrace.m4: Move here. Change-Id: I849c149fd5dd8c3b2b0af38654fb353e3727871b
2020-10-24gdbserver: re-generate configureSimon Marchi3-2/+21
I get this diff when I re-generate the configure script in gdbserver, probably leftovers from e911c6663bb8 ("Require kinfo_get_file and kinfo_get_vmmap for FreeBSD hosts"). gdbserver/ChangeLog: * config.in: Re-generate. * configure: Re-generate. Change-Id: Id19a72ea9f3e7c7b4fdb0f319c9c0bbad0e39aeb
2020-10-21gdbserver: fix overlap in sprintf argument and bufferSimon Marchi2-2/+9
While trying to build on Cygwin (gcc 10.2.0), I got: CXX server.o /home/Baube/src/binutils-gdb/gdbserver/server.cc: In function 'void handle_general_set(char*)': /home/Baube/src/binutils-gdb/gdbserver/server.cc:832:12: error: 'sprintf' argument 3 overlaps destination object 'own_buf' [-Werror=restrict] 832 | sprintf (own_buf, "E.Unknown thread-events mode requested: %s\n", | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 833 | mode); | ~~~~~ /home/Baube/src/binutils-gdb/gdbserver/server.cc:553:27: note: destination object referenced by 'restrict'-qualified argument 1 was declared here 553 | handle_general_set (char *own_buf) | ~~~~~~^~~~~~~ There is indeed a problem: mode points somewhere into own_buf. And by the time mode gets formatted as a %s, whatever it points to has been overwritten. I hacked gdbserver to coerce it into that error path, and this is the resulting message: (gdb) p own_buf $1 = 0x629000000200 "E.Unknown thread-events mode requested: ad-events mode requested: 00;10:9020fdf7ff7f0000;thread:p49388.49388;core:e;\n" Fix it by formatting the error string in an std::string first. gdbserver/ChangeLog: * server.cc (handle_general_set): Don't use sprintf with argument overlapping buffer. Change-Id: I4fdf05c0117f63739413dd67ddae7bd6ee414824
2020-10-20Fix undefined behavior in gdbserverTom Tromey2-1/+7
PR gdb/26742 points out some undefined behavior in gdbserver. The bug is that remove_thread does: free_one_thread (thread); if (current_thread == thread) current_thread = NULL; However, the equality check is undefined, because "thread" has already been freed. This patch fixes the bug by moving the check earlier. Tested on x86-64 Fedora 32. 2020-10-20 Tom Tromey <tromey@adacore.com> PR gdb/26742: * inferiors.cc (remove_thread): Clear current_thread before freeing the thread.
2020-10-13Remove unneeded netbsd_add_process()Kamil Rytarowski2-14/+7
Currently it does not add any value. The netbsd_tdesc local variable is no longer needed. Remove it. The tdesc value is set by the low target now. gdbserver/ChangeLog: * netbsd-low.cc (netbsd_tdesc): Remove. (netbsd_add_process): Likewise. (netbsd_process_target::create_inferior): Update.
2020-10-09gdb: Delay releasing target_desc_up in more casesAndrew Burgess2-3/+8
After commit: commit 51a948fdf0e14fb69ab9e0c79ae8b2415801f9a3 Date: Mon Jul 20 14:18:04 2020 +0100 gdb: Have allocate_target_description return a unique_ptr There were a few places where we could (should?) have delayed releasing the target_desc_up until a little later. This commit catches these cases. In the case of ARC, the target_desc_up is now exposed right out to gdbserver, which means making a small change there too. There should be no user visible changes after this commit. gdb/ChangeLog: * arch/aarch32.c (aarch32_create_target_description): Release the target_desc_up as late as possible. * arch/aarch64.c (aarch64_create_target_description): Likewise. * arch/amd64.c (amd64_create_target_description): Likewise. * arch/arc.c (arc_create_target_description): Return a target_desc_up, don't release it. * arch/arc.h (arc_create_target_description): Update declaration. (arc_lookup_target_description): Move target_desc_up into the cache, and return a borrowed pointer. * arch/arm.c (arm_create_target_description): Release the target_desc_up as late as possible. * arch/i386.c (i386_create_target_description): Likewise. * arch/riscv.h (riscv_create_target_description): Update declaration to match definition. * arch/tic6x.c (tic6x_create_target_description): Release the target_desc_up as late as possible. gdbserver/ChangeLog: * linux-arc-low.cc (arc_linux_read_description): Release the unique_ptr returned from arc_create_target_description.
2020-10-09gnulib: Ensure all libraries are used when building gdb/gdbserverAndrew Burgess2-6/+10
An issue was reported here related to building GDB on MinGW: https://sourceware.org/pipermail/gdb/2020-September/048927.html It was suggested here: https://sourceware.org/pipermail/gdb/2020-September/048931.html that the solution might be to make use of $(LIB_GETRANDOM), a variable defined in the gnulib makefile, when linking GDB. In fact I think the issue is bigger than just LIB_GETRANDOM. When using the script binutils-gdb/gnulib/update-gnulib.sh to reimport gnulib there is a lot of output from gnulib's gnulib-tool. Part of that output is this: You may need to use the following makefile variables when linking. Use them in <program>_LDADD when linking a program, or in <library>_a_LDFLAGS or <library>_la_LDFLAGS when linking a library. $(FREXPL_LIBM) $(FREXP_LIBM) $(INET_NTOP_LIB) $(LIBTHREAD) $(LIB_GETLOGIN) $(LIB_GETRANDOM) $(LIB_HARD_LOCALE) $(LIB_MBRTOWC) $(LIB_SETLOCALE_NULL) $(LTLIBINTL) when linking with libtool, $(LIBINTL) otherwise What I think this is telling us is that we should be including the value of all these variables on the link line for gdb and gdbserver. The problem though is that these variables are define in gnulib's makefile, but are not (necessarily) defined in GDB's makefile. One solution would be to recreate the checks that gnulib performs in order to recreate these variables in both gdb's and gdbserver's makefile. Though this shouldn't be too hard, most (if not all) of these checks are in the form macros defined in m4 files in the gnulib tree, so we could just reference these as needed. However, in this commit I propose a different solution. Currently, in the top level makefile, we give gdb and gdbserver a dependency on gnulib. Once gnulib has finished building gdb and gdbserver can start, these projects then have a hard coded (relative) path to the compiled gnulib library in their makefiles. In this commit I extend the gnulib configure script to install a new makefile fragment in the gnulib build directory. This new file will have the usual variable substitutions applied to it, and so can include the complete list (see above) of all the extra libraries that are needed when linking against gnulib. In fact the new makefile fragment defines three variables, these are: LIBGNU: The path to the archive containing gnulib. Can be used as a dependency as when this file changes gdb/gdbserver should be relinked. LIBGNU_EXTRA_LIBS: A list of linker -l.... flags that should be included in the link line of gdb/gdbserver. These are libraries that $(LIBGNU) depends on. This list is taken from the output of gnulib-tool, which is run by our gnulib/update-gnulib.sh script. INCGNU: A list of -I.... include paths that should be passed to the compiler, these are where the gnulib headers can be found. Now both gdb and gdbserver can include the makefile fragment and make use of these variables. The makefile fragment relies on the variable GNULIB_BUILDDIR being defined. This is checked for in the fragment, and was already defined in the makefiles of gdb and gdbserver. gdb/ChangeLog: * Makefile.in: Include Makefile.gnulib.inc. Don't define LIBGNU or INCGNU. Make use of LIBGNU_EXTRA_LIBS when linking. gdbserver/ChangeLog: * Makefile.in: Include Makefile.gnulib.inc. Don't define LIBGNU or INCGNU. Make use of LIBGNU_EXTRA_LIBS when linking. gnulib/ChangeLog: * Makefile.gnulib.inc.in: New file. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Install the new file.
2020-10-08gdb: Have allocate_target_description return a unique_ptrAndrew Burgess5-16/+28
Update allocate_target_description to return a target_desc_up, a specialisation of unique_ptr. This commit does not attempt to make use of the unique_ptr in the best possible way, in almost all cases we immediately release the pointer from within the unique_ptr and then continue as before. There are a few places where it was easy to handle the unique_ptr, and in these cases I've done that. Everything under gdb/features/* is auto-regenerated. There should be no user visible changes after this commit. gdb/ChangeLog: * arch/aarch32.c (aarch32_create_target_description): Release unique_ptr returned from allocate_target_description. * arch/aarch64.c (aarch64_create_target_description): Likewise. * arch/amd64.c (amd64_create_target_description): Likewise. * arch/arc.c (arc_create_target_description): Likewise. * arch/arm.c (arm_create_target_description): Likewise. * arch/i386.c (i386_create_target_description): Likewise. * arch/riscv.c (riscv_create_target_description): Update return type. Handle allocate_target_description returning a unique_ptr. (riscv_lookup_target_description): Update to handle unique_ptr. * arch/tic6x.c (tic6x_create_target_description): Release unique_ptr returned from allocate_target_description. * features/microblaze-with-stack-protect.c: Regenerate. * features/microblaze.c: Regenerate. * features/mips-dsp-linux.c: Regenerate. * features/mips-linux.c: Regenerate. * features/mips64-dsp-linux.c: Regenerate. * features/mips64-linux.c: Regenerate. * features/nds32.c: Regenerate. * features/nios2.c: Regenerate. * features/or1k.c: Regenerate. * features/rs6000/powerpc-32.c: Regenerate. * features/rs6000/powerpc-32l.c: Regenerate. * features/rs6000/powerpc-403.c: Regenerate. * features/rs6000/powerpc-403gc.c: Regenerate. * features/rs6000/powerpc-405.c: Regenerate. * features/rs6000/powerpc-505.c: Regenerate. * features/rs6000/powerpc-601.c: Regenerate. * features/rs6000/powerpc-602.c: Regenerate. * features/rs6000/powerpc-603.c: Regenerate. * features/rs6000/powerpc-604.c: Regenerate. * features/rs6000/powerpc-64.c: Regenerate. * features/rs6000/powerpc-64l.c: Regenerate. * features/rs6000/powerpc-7400.c: Regenerate. * features/rs6000/powerpc-750.c: Regenerate. * features/rs6000/powerpc-860.c: Regenerate. * features/rs6000/powerpc-altivec32.c: Regenerate. * features/rs6000/powerpc-altivec32l.c: Regenerate. * features/rs6000/powerpc-altivec64.c: Regenerate. * features/rs6000/powerpc-altivec64l.c: Regenerate. * features/rs6000/powerpc-e500.c: Regenerate. * features/rs6000/powerpc-e500l.c: Regenerate. * features/rs6000/powerpc-isa205-32l.c: Regenerate. * features/rs6000/powerpc-isa205-64l.c: Regenerate. * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate. * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate. * features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c: Regenerate. * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate. * features/rs6000/powerpc-isa207-htm-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa207-htm-vsx64l.c: Regenerate. * features/rs6000/powerpc-isa207-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa207-vsx64l.c: Regenerate. * features/rs6000/powerpc-vsx32.c: Regenerate. * features/rs6000/powerpc-vsx32l.c: Regenerate. * features/rs6000/powerpc-vsx64.c: Regenerate. * features/rs6000/powerpc-vsx64l.c: Regenerate. * features/rs6000/rs6000.c: Regenerate. * features/rx.c: Regenerate. * features/s390-gs-linux64.c: Regenerate. * features/s390-linux32.c: Regenerate. * features/s390-linux32v1.c: Regenerate. * features/s390-linux32v2.c: Regenerate. * features/s390-linux64.c: Regenerate. * features/s390-linux64v1.c: Regenerate. * features/s390-linux64v2.c: Regenerate. * features/s390-te-linux64.c: Regenerate. * features/s390-tevx-linux64.c: Regenerate. * features/s390-vx-linux64.c: Regenerate. * features/s390x-gs-linux64.c: Regenerate. * features/s390x-linux64.c: Regenerate. * features/s390x-linux64v1.c: Regenerate. * features/s390x-linux64v2.c: Regenerate. * features/s390x-te-linux64.c: Regenerate. * features/s390x-tevx-linux64.c: Regenerate. * features/s390x-vx-linux64.c: Regenerate. * mips-tdep.c (_initialize_mips_tdep): Release unique_ptr returned from allocate_target_description. * target-descriptions.c (allocate_target_description): Update return type. (print_c_tdesc::visit_pre): Release unique_ptr returned from allocate_target_description. gdbserver/ChangeLog: * linux-low.cc (linux_process_target::handle_extended_wait): Release the unique_ptr returned from allocate_target_description. * linux-riscv-low.cc (riscv_target::low_arch_setup): Likewise. * linux-x86-low.cc (tdesc_amd64_linux_no_xml): Change type. (tdesc_i386_linux_no_xml): Change type. (x86_linux_read_description): Borrow pointer from unique_ptr object. (x86_target::get_ipa_tdesc_idx): Likewise. (initialize_low_arch): Likewise. * tdesc.cc (allocate_target_description): Update return type. gdbsupport/ChangeLog: * tdesc.h (allocate_target_description): Update return type.
2020-10-07Remove some dead code from handle_search_memoryTom Tromey2-7/+6
handle_search_memory had some code after a call to error. This code is dead, and this patch removes it. gdbserver/ChangeLog 2020-10-07 Tom Tromey <tromey@adacore.com> * server.cc (handle_search_memory): Remove dead code.
2020-10-07Use simple_search_memory in gdbserverTom Tromey2-107/+11
This replaces gdbserver's memory-searching function with simple_search_memory. gdbserver/ChangeLog 2020-10-07 Tom Tromey <tromey@adacore.com> * server.cc (handle_search_memory_1): Remove. (handle_search_memory): Use simple_search_memory.
2020-10-07gdb: put user-supplied CFLAGS at the endSimon Marchi2-3/+20
GDB currently doesn't build cleanly with clang (a -Wdeprecated-copy-dtor error). I configured my clang-based GDB build with CXXFLAGS="-Wno-error=deprecated-copy-dtor", so I can use it despite that problem. However, I found that it had no effect. This is because my -Wno-error=Wdeprecated-copy-dtor switch is followed by -Werror in the command line, which switches back all warnings to be errors. If we want the user-supplied C(XX)FLAGS to be able to override flags added by our configure script, the user-supplied C(XX)FLAGS should appear after the configure-supplied flags. This patch moves the user-supplied CXXFLAGS at the very end of the compilation command line, which fixes the problem described above. This means moving it out of INTERNAL_CFLAGS and inlining it in the users of INTERNAL_CFLAGS. I observed the problem when building GDB, but the same problem could happen with GDBserver, so the change is done there too. In GDBserver, INTERNAL_CFLAGS is passed when linking gdb/ChangeLog: * Makefile.in (COMPILE): Add CXXFLAGS. (INTERNAL_CFLAGS_BASE): Remove CXXFLAGS. (check-headers): Add CXXFLAGS. gdbserver/ChangeLog: * Makefile.in (COMPILE): Add CXXFLAGS. (INTERNAL_CFLAGS_BASE): Remove CXXFLAGS. (gdbserver$(EXEEXT)): Add CXXFLAGS. (gdbreplay$(EXEEXT)): Add CXXFLAGS. ($(IPA_LIB)): Add CXXFLAGS. (IPAGENT_COMPILE): Add CXXFLAGS. Change-Id: I00e054506695e0e9536095c6d14827e48abd8f69
2020-10-07Add Makefile.in entry for "Add NetBSD/aarch64 gdbserver support"Kamil Rytarowski1-0/+1
The support is on par with NetBSD/amd64, thus GPR works, single step and software breakpoint are operational, and the SVR4 r_debug integration is functional. gdbserver/ChangeLog: * netbsd-aarch64-low.cc: Add. * Makefile.in (SFILES): Register "netbsd-aarch64-low.c". * configure.srv: Add aarch64*-*-netbsd*.
2020-10-07gdb: Correct the ChageLog entryShahab Vahedi1-1/+1
Becausae of a copy/paste, I've put myself as the author of the following patch which was not true: 6d2d7c5668f gdbserver: Add GNU/Linux support for ARC This change will place the correct date and author in the ChangeLog.
2020-10-07gdbserver: Add GNU/Linux support for ARCAnton Kolesov4-0/+437
This gdbserver implementation supports ARC ABI v3 and v4 (older ARC ABI versions are not supported by other modern GNU tools or Linux itself). Gdbserver supports inspection of ARC HS registers R30, R58 and R59 - feature that has been added to Linux 4.12. Whether gdbserver build will actually support this feature depends on the version of Linux headers used to build the server. v2 [1]: - Use "this->read_memory ()" instead of "the_target->read_memory ()". - Remove the unnecessary "arch-arc.o:" target from the "Makefile.in". - Got rid of "ntohs()" function and added lots of comments about endianness. - Clarify why "pc" value is read from and saved to different fields in user regs struct. - In function "is_reg_name_available_p()", use a range-based iterator to loop over the registers. - Removed mentioning of issue number that was not related to sourceware. - A few typo's fixed. [1] Remarks https://sourceware.org/pipermail/gdb-patches/2020-September/171911.html https://sourceware.org/pipermail/gdb-patches/2020-September/171919.html gdbserver/ChangeLog: * configure.srv: Support ARC architecture. * Makefile.in: Add linux-arc-low.cc and arch/arc.o. * linux-arc-low.cc: New file.
2020-10-07Stop passing netbsd_process_target to local functionsKamil Rytarowski2-22/+29
Switch from target->read_memory to netbsd_nat::read_memory and cleanup the code. No functional change. gdbserver/ChangeLog: * netbsd-low.cc (get_dynamic, get_r_debug, read_one_ptr) (netbsd_qxfer_libraries_svr4): Remove "target" argument and update. (netbsd_process_target::qxfer_libraries_svr4): Update.
2020-10-07Fix whitespace formattingKamil Rytarowski3-7/+12
gdbserver/ChangeLog: * netbsd-low.cc: Fix whitespace formatting. * netbsd-amd64-low.cc: Likewise.
2020-10-07Add common write_memory and read_memory NetBSD routinesKamil Rytarowski2-59/+7
Instead of sharing the native-only code with all BSDs with slightly different semantics of the kernels, share the NetBSD-only behavior beteen the NetBSD native and gdbserver setup. NetBSD does not differentiate the address space I and D in the operations (contrary to OpenBSD). NetBSD handles EACCES that integrates with NetBSD specific PaX MPROTECT error handling. Add a verbose message in the native client that an operation could be cancelled due to PaX MPROTECT setup. gdb/ChangeLog: * nat/netbsd-nat.c (write_memory, read_memory): Add. * nat/netbsd-nat.h (write_memory, read_memory): Likewise. * nbsd-nat.c (nbsd_nat_target::xfer_partial): Update. gdbserver/ChangeLog: * netbsd-low.cc (netbsd_process_target::read_memory) (netbsd_process_target::write_memory): Update.
2020-10-07Add ChangeLog for "Add NetBSD/aarch64 gdbserver support"Kamil Rytarowski1-0/+6
The support is on par with NetBSD/amd64, thus GPR works, single step and software breakpoint are operational, and the SVR4 r_debug integration is functional. gdbserver/ChangeLog: * netbsd-aarch64-low.cc: Add. * Makefile.in (SFILES): Register "netbsd-aarch64-low.c". * configure.srv: Add aarch64*-*-netbsd*.
2020-10-07Add NetBSD/aarch64 gdbserver supportKamil Rytarowski2-0/+119
The support is on par with NetBSD/amd64, thus GPR works, single step and software breakpoint are operational, and the SVR4 r_debug integration is functional. gdbserver/ChangeLog: * netbsd-aarch64-low.cc: Add. * Makefile.in (SFILES): Register "netbsd-aarch64-low.c". * configure.srv: Add aarch64*-*-netbsd*.
2020-10-06gdbserver: Remove unused argument in register_data()Shahab Vahedi2-7/+11
The register_data() function in gdbserver/regcache.cc has an input argument called "fetch". This argument is not used by this static function at all. Therefore, it is time to get rid of it. gdbserver/ChangeLog: * regcache.cc (register_data): Remove unused "fetch" argument.
2020-10-02gdb: add debug prints in event loopSimon Marchi2-0/+23
Add debug printouts about event loop-related events: - When a file descriptor handler gets invoked - When an async event/signal handler gets invoked gdb/ChangeLog: * async-event.c (invoke_async_signal_handlers): Add debug print. (check_async_event_handlers): Likewise. * event-top.c (show_debug_event_loop): New function. (_initialize_event_top): Register "set debug event-loop" setting. gdbserver/ChangeLog: * server.cc (handle_monitor_command): Handle "set debug-event-loop". (captured_main): Handle "--debug-event-loop". (monitor_show_help): Mention new setting. (gdbserver_usage): Mention new flag. gdbsupport/ChangeLog: * event-loop.h (debug_event_loop): New variable declaration. (event_loop_debug_printf_1): New function declaration. (event_loop_debug_printf): New macro. * event-loop.cc (debug_event_loop): New variable. (handle_file_event): Add debug print. (event_loop_debug_printf_1): New function. Change-Id: If78ed3a69179881368e7895b42940ce13b6a1a05
2020-10-02gdb: give names to event loop file handlersSimon Marchi3-5/+15
Assign names to event loop file handlers. They will be used in debug messages when file handlers are invoked. In GDB, each UI used to get its own unique number, until commit cbe256847e19 ("Remove ui::num"). Re-introduce this field, and use it to make a unique name for the handler. I'm not too sure what goes on in ser-base.c, all I know is that it's what is used when debugging remotely. I've just named the main handler "serial". It would be good to have unique names there too. For instance when debugging with two different remote connections, we'd ideally want the handlers to have unique names. I didn't do it in this patch though. gdb/ChangeLog: * async-event.c (initialize_async_signal_handlers): Pass name to add_file_handler * event-top.c (ui_register_input_event_handler): Likewise. * linux-nat.c (linux_nat_target::async): Likewise. * run-on-main-thread.c (_initialize_run_on_main_thread): Likewise * ser-base.c (reschedule): Likewise. (ser_base_async): Likewise. * tui/tui-io.c: Likewise. * top.h (struct ui) <num>: New field. * top.c (highest_ui_num): New variable. (ui::ui): Initialize num. gdbserver/ChangeLog: * linux-low.cc (linux_process_target::async): Pass name to add_file_handler. * remote-utils.cc (handle_accept_event): Likewise. (remote_open): Likewise. gdbsupport/ChangeLog: * event-loop.h (add_file_handler): Add "name" parameter. * event-loop.cc (struct file_handler) <name>: New field. (create_file_handler): Add "name" parameter, assign it to file handler. (add_file_handler): Add "name" parameter. Change-Id: I9f1545f73888ebb6778eb653a618ca44d105f92c
2020-10-02Add NetBSD/i386 gdbserver supportKamil Rytarowski4-0/+170
The support is on part with NetBSD/amd64, thus GPR works, single step and software breakpoint are operational, and the SVR4 r_debug integration is functional. gdbserver/ChangeLog: * netbsd-i386-low.cc: Add. * Makefile.in (SFILES): Register "netbsd-i386-low.c". * configure.srv: Add i[34567]86-*-netbsd*.
2020-10-02Refactor the NetBSD amd64 gdbserver supportKamil Rytarowski4-46/+67
Replace the pre-C++ construct of netbsd_target_ops, netbsd_regset_info and netbsd_tdesc with C++ inheritance approach found in the Linux gdbserver code. Add netbsd_amd64_target, that inherits from the netbsd_process_target class and add proper singleton object for the_netbsd_target, initialized from netbsd_amd64_target. Call low_arch_setup () on post process creation, which sets machine specific properties of the traced process. Remove global singleton the_netbsd_target object from the generic gdbserver code. This refactoring introduces no functional change from the end-user point of view. gdbserver/ChangeLog: * netbsd-amd64-low.cc (netbsd_x86_64_arch_setup): Remove. (netbsd_target_regsets): Now const. (the_low_target): Remove. (class netbsd_amd64_target, the_netbsd_amd64_target) (the_netbsd_target): Add. * netbsd-low.cc (netbsd_process_target::post_create_inferior): Call low_arch_setup (). (netbsd_process_target::fetch_registers) (netbsd_process_target::store_registers, initialize_low): Update. (the_netbsd_target): Remove. * netbsd-low.h (netbsd_target_regsets, netbsd_target_ops) (the_low_target, netbsd_tdesc): Remove. (netbsd_process_target::get_regs_info) (netbsd_process_target::low_arch_setup): Add.
2020-09-24Handle 64bit breakpoints of WOW64 processes as SIGINTHannes Domani3-6/+5
When a WOW64 process triggers a breakpoint exception in 64bit code (which happens when a 64bit gdb calls DebugBreakProcess for a 32bit target), gdb ignores the breakpoint (because Wow64GetThreadContext can only report the pc of 32bit code, and there is not int3 at this location). But if these 64bit breakpoint exceptions are handled as SIGINT, gdb doesn't check for int3, and always stops the target. gdb/ChangeLog: 2020-09-23 Hannes Domani <ssbssa@yahoo.de> * nat/windows-nat.c (handle_exception): Handle 64bit breakpoints in WOW64 processes as SIGINT. * nat/windows-nat.h: Make wow64_process a shared variable. * windows-nat.c: Remove static wow64_process variable. gdbserver/ChangeLog: 2020-09-23 Hannes Domani <ssbssa@yahoo.de> * win32-low.cc: Remove local wow64_process variable. * win32-low.h: Remove local wow64_process variable.
generated by cgit v1.1 at 2024-11-27 02:17:36 +0000