| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
PR27257 reports a problem that can be reproduced as follows:
- use x86_64 machine with avx512 support
- compile a hello world with -m32 to a.out
- start a gdbserver session with a.out
- use gdb to connect to the gdbserver session
This makes us run into:
...
Listening on port 2346
Remote debugging from host ::1, port 34940
src/gdbserver/regcache.cc:257: \
A problem internal to GDBserver has been detected.
Unknown register zmm16h requested
...
The problem is that i387_xsave_to_cache in gdbserver/i387-fp.cc can't find a
register zmm16h in the register cache.
To understand how this happens, first some background.
SSE has 16 128-bit wide xmm registers.
AVX extends the SSE registers set as follows:
- it extends the 16 existing 128-bit wide xmm registers to 256-bit wide ymm
registers.
AVX512 extends the AVX register set as follows:
- it extends the 16 existing 256-bit wide ymm registers to 512-bit wide zmm
registers.
- it adds 16 additional 512-bit wide zmm registers (with corresponding ymm and
xmm subregisters added as well)
However, in 32-bit mode, there are only 8 xmm/ymm/zmm registers.
The problem we're running into is that gdbserver/i387-fp.cc uses these
constants to describe the size of the register file:
...
static const int num_avx512_zmmh_low_registers = 16;
static const int num_avx512_zmmh_high_registers = 16;
static const int num_avx512_ymmh_registers = 16;
static const int num_avx512_xmm_registers = 16;
...
which are all incorrect for the 32-bit case.
Fix this by replacing the constants with variables that have the appropriate
values in 64-bit and 32-bit mode.
Tested on x86_64-linux with native and unix/-m32.
|
|
While working on target_waitstatus changes, I noticed a few places where
const target_waitstatus objects could be passed by reference instead of
by pointers. And in some cases, places where a target_waitstatus could
be passed as const, but was not. Convert them as much as possible.
Change-Id: Ied552d464be5d5b87489913b95f9720a5ad50c5a
|
|
Make target_waitstatus_to_string a "to_string" method of
target_waitstatus, a bit like we have ptid_t::to_string already. This
will save a bit of typing.
Change-Id: Id261b7a09fa9fa3c738abac131c191a6f9c13905
|
|
PR gdb/28586 points out that "make distclean" fails to delete
config.cache from gdbserver/. This patch fixes the bug, and removes a
duplicate "Makefile" deletion that was also pointed out in the PR.
|
|
The rhES5 build failed due to an upstream import a while back. The
bug here is that, while the 'personality' function exists,
ADDR_NO_RANDOMIZE is only defined in <linux/personality.h>, not
<sys/personality.h>.
However, <linux/personality.h> does not declare the 'personality'
function, and <sys/personality.h> and <linux/personality.h> cannot
both be included.
This patch restores one of the removed configure checks and updates
the code to check it.
We had this as a local patch at AdaCore, because it seemed like there
was no interest upstream. However, now it turns out that this fixes
PR build/28555, so I'm sending it now.
|
|
I get some diffs when running autoconf in gdbserver, probably leftovers
from commit 5dfe4bfcb969 ("Fix format_pieces selftest on Windows").
Re-generate configure in that directory.
Change-Id: Icdc9906af95fbaf1047a579914b2983f8ec5db08
|
|
The current register set selection mechanism for AArch64 is static, based
on a pre-populated array of register sets.
This means that we might potentially probe register sets that are not
available. This is OK if the kernel errors out during ptrace, but probing the
tag_ctl register, for example, does not result in a ptrace error if the kernel
supports the tagged address ABI but not MTE (PR 28355).
Making the register set selection dynamic, based on feature checks, solves
this and simplifies the code a bit. It allows us to list all of the register
sets only once, and pick and choose based on HWCAP/HWCAP2 or other properties.
I plan to backport this fix to GDB 11 as well.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28355
|
|
This patch adds gdbserver support for OpenRISC. This has been used for
debugging the glibc port that in being worked on here:
https://github.com/openrisc/or1k-glibc/tree/or1k-port-2
Hence the comment about registers definitions being inline with glibc.
|
|
I wanted to write a warning that included two target_pid_to_str calls,
like this:
warning (_("Blabla %s, blabla %s"),
target_pid_to_str (ptid1),
target_pid_to_str (ptid2));
This doesn't work, because target_pid_to_str stores its result in a
static buffer, so my message would show twice the same ptid. Change
target_pid_to_str to return an std::string to avoid this. I don't think
we save much by using a static buffer, but it is more error-prone.
Change-Id: Ie3f649627686b84930529cc5c7c691ccf5d36dc2
|
|
This adds some missing code to the 'uninstall' targets in gdb and
gdbserver. It also changes gdb's uninstall target so that it no
longer tries to remove any man page -- this is already done (and more
correctly) by doc/Makefile.in.
I tested this with 'make install' followed by 'make uninstall', then
examining the install tree for regular files. Only the 'dir' file
remains, but this appears to just be how 'install-info' is intended to
work.
|
|
This removes a number of unused variables from gdbserver's Makefile.
I found these while working on the subsequent patches, and figured it
would be cleaner to have a separate patch for the deletions.
|
|
I stumbled on a bug caused by the fact that a code path read
target_waitstatus::value::sig (expecting it to contain a gdb_signal
value) while target_waitstatus::kind was TARGET_WAITKIND_FORKED. This
meant that the active union field was in fact
target_waitstatus::value::related_pid, and contained a ptid. The read
signal value was therefore garbage, and that caused GDB to crash soon
after. Or, since that GDB was built with ubsan, this nice error
message:
/home/simark/src/binutils-gdb/gdb/linux-nat.c:1271:12: runtime error: load of value 2686365, which is not a valid value for type 'gdb_signal'
Despite being a large-ish change, I think it would be nice to make
target_waitstatus safe against that kind of bug. As already done
elsewhere (e.g. dynamic_prop), validate that the type of value read from
the union matches what is supposed to be the active field.
- Make the kind and value of target_waitstatus private.
- Make the kind initialized to TARGET_WAITKIND_IGNORE on
target_waitstatus construction. This is what most users appear to do
explicitly.
- Add setters, one for each kind. Each setter takes as a parameter the
data associated to that kind, if any. This makes it impossible to
forget to attach the associated data.
- Add getters, one for each associated data type. Each getter
validates that the data type fetched by the user matches the wait
status kind.
- Change "integer" to "exit_status", "related_pid" to "child_ptid",
just because that's more precise terminology.
- Fix all users.
That last point is semi-mechanical. There are a lot of obvious changes,
but some less obvious ones. For example, it's not possible to set the
kind at some point and the associated data later, as some users did.
But in any case, the intent of the code should not change in this patch.
This was tested on x86-64 Linux (unix, native-gdbserver and
native-extended-gdbserver boards). It was built-tested on x86-64
FreeBSD, NetBSD, MinGW and macOS. The rest of the changes to native
files was done as a best effort. If I forgot any place to update in
these files, it should be easy to fix (unless the change happens to
reveal an actual bug).
Change-Id: I0ae967df1ff6e28de78abbe3ac9b4b2ff4ad03b7
|
|
Add a constructor to initialize the waitstatus members. Initialize the
others in the class directly.
Change-Id: I10f885eb33adfae86e3c97b1e135335b540d7442
|
|
Add a constructor and a destructor. The constructor takes care of the
initialization that happened in add_thread, while the destructor takes
care of the freeing that happened in free_one_thread. This is needed to
make target_waitstatus non-POD, as thread_info contains a member of that
type.
Change-Id: I1db321b4de9dd233ede0d5c101950f1d6f1d13b7
|
|
Say we use a gcc version that (while supporting c++11) does not support c++11
by default, and needs an -std setting to enable it.
If gdb would use the default AX_CXX_COMPILE_STDCXX from autoconf-archive, then
we'd have:
...
CXX="g++ -std=gnu++11"
...
That mechanism however has the following problem (quoting from commit
0bcda685399):
...
the top level Makefile passes CXX down to subdirs, and that overrides whatever
gdb/Makefile may set CXX to. The result would be that a make invocation from
the build/gdb/ directory would use "g++ -std=gnu++11" as expected, while a
make invocation at the top level would not.
...
Commit 0bcda685399 fixes this by using a custom AX_CXX_COMPILE_STDCXX which
does:
...
CXX=g++
CXX_DIALECT=-std=gnu++11
...
The problem reported in PR28318 is that using the custom instead of the
default AX_CXX_COMPILE_STDCXX makes the configure test for std::thread
support fail.
We could simply add $CXX_DIALECT to the test for std::thread support, but
that would have to be repeated for each added c++ support test.
Instead, fix this by doing:
...
CXX="g++ -std=gnu++11"
CXX_DIALECT=-std=gnu++11
...
This is somewhat awkward, since it results in -std=gnu++11 occuring twice in
some situations:
...
$ touch src/gdb/dwarf2/read.c
$ ( cd build/gdb; make V=1 dwarf2/read.o )
g++-4.8 -std=gnu++11 -x c++ -std=gnu++11 ...
...
However, both settings are needed:
- the switch in CXX for the std::thread tests (and other tests)
- the switch in CXX_DIALECT so it can be appended in Makefiles, to
counteract the fact that the top-level Makefile overrides CXX
The code added in gdb/ax_cxx_compile_stdcxx.m4 is copied from the default
AX_CXX_COMPILE_STDCXX from autoconf-archive.
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28318
|
|
The ptid_t 'tid' member is normally used as an address in gdb -- both
bsd-uthread and ravenscar-thread use it this way. However, because
the type is 'long', this can cause problems with sign extension.
This patch changes the type to ULONGEST to ensure that sign extension
does not occur.
|
|
I wanted to find, and potentially modify, all the spots where the
'tid' parameter to the ptid_t constructor was used. So, I temporarily
removed this parameter and then rebuilt.
In order to make it simpler to search through the "real" (nonzero)
uses of this parameter, something I knew I'd have to do multiple
times, I removed any ", 0" from constructor calls.
Co-Authored-By: John Baldwin <jhb@FreeBSD.org>
|
|
I noticed that gdbserver/win32-low.h has an unused declaration. This
code was changed a while ago, but this declaration slipped through.
This patch removes it. Tested by rebuilding.
|
|
Update gdbserver to check r_version < 1 instead of r_version != 1 so
that r_version can be bumped for a new field in the glibc debugger
interface to support multiple namespaces. Since so far, the gdbserver
only reads fields defined for r_version == 1, it is compatible with
r_version >= 1.
All future glibc debugger interface changes will be backward compatible.
If there is ever the need for backward incompatible change to the glibc
debugger interface, a new DT_XXX element will be provided to access the
new incompatible interface.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=11839
|
|
The gdb build was broken on Windows after the patch to change
get_inferior_cwd. This patch fixes the build.
|
|
In commit:
commit f069ea46a03ae868581d1c852da28e979ea1245a
Date: Sat Jul 3 16:29:08 2021 -0700
Rename gdb/ChangeLog to gdb/ChangeLog-2021
The gdb/ChangeLog file was renamed, but all of the other ChangeLog
files relating to gdb were left in place.
As I understand things, the no ChangeLogs policy applies to all the
GDB related directories, so this commit renames all of the remaining
GDB related ChangeLog files.
As with the original commit, the intention behind this commit is to
hopefully stop people merging ChangeLog entries by mistake.
The renames carried out in this commit are:
gdb/doc/ChangeLog -> gdb/doc/ChangeLog-1991-2021
gdb/stubs/ChangeLog -> gdb/stubs/ChangeLog-2012-2020
gdb/testsuite/ChangeLog -> gdb/testsuite/ChangeLog-2014-2021
gdbserver/ChangeLog -> gdbserver/ChangeLog-2002-2021
gdbsupport/ChangeLog -> gdbsupport/ChangeLog-2020-2021
|
|
Same idea as the previous patch, but for m_cwd.
To keep things consistent across the board, change get_inferior_cwd as
well, which is shared with GDBserver. So update the related GDBserver
code too.
Change-Id: Ia2c047fda738d45f3d18bc999eb67ceb8400ce4e
|
|
The declaration of set_inferior_cwd is currently shared between gdb and
gdbserver, in gdbsupport/common-inferior.h. It doesn't need to be, as
set_inferior_cwd is not called from common code. Only get_inferior_cwd
needs to.
The motivation for this is that a future patch will change the prototype
of set_inferior_cwd in gdb, and I don't want to change it for gdbserver
unnecessarily. I see this as a good cleanup in any case, to reduce to
just the essential what is shared between GDB and GDBserver.
Change-Id: I3127d27d078f0503ebf5ccc6fddf14f212426a73
|
|
The next patch will make the use of sigtimedwait conditional to whether
the platform provides it. Start by adding a configure check for it.
gdbsupport/ChangeLog:
* common.m4 (GDB_AC_COMMON): Check for sigtimedwait.
* config.in, configure: Re-generate.
gdb/ChangeLog:
* config.in, configure: Re-generate.
gdbserver/ChangeLog:
* config.in, configure: Re-generate.
Change-Id: Ic7613fe14521b966b4d991bbcd0933ab14629c05
|
|
These dirs don't use automake, so use AC_CONFIG_MACRO_DIRS to specify
../config as a search dir for m4 macros. This allows removal of a lot
of hand-written m4_include's from acinclude.m4 files, and simplifies
use of `aclocal` or `autoreconf` as manual -I is not needed.
|
|
The current setting assumes that gnulib is only used by dirs
immediately under the source root. Trying to build it two or
more levels deep fails. Switch GNULIB_BUILDDIR to a relative
GNULIB_PARENT_DIR so that it can be used to construct both the
build & source paths.
|
|
I wrote a small script to spot a pattern of indentation mistakes I saw
happened in breakpoint.c. And while at it I ran it on all files and
fixed what I found. No behavior changes intended, just indentation and
addition / removal of curly braces.
gdb/ChangeLog:
* Fix some indentation mistakes throughout.
gdbserver/ChangeLog:
* Fix some indentation mistakes throughout.
Change-Id: Ia01990c26c38e83a243d8f33da1d494f16315c6e
|
|
Two additional settings for developers who use emacs:
1. Set brace-list-open to 0 for C and C++ modes, this ensures we
format things like:
enum blah
{
....
};
Instead of the default for the emacs GNU style:
enum blah
{
...
};
The former seems to be the GDB style.
2. Set sentence-end-double-space to t. This is actually the default
value for this setting, but if anyone has customised this to nil in
general, then forcing this back to t for GDB files will give a
better behaviour for the paragraph filling.
gdb/ChangeLog:
* .dir-locals.el: Set sentence-end-double-space for all modes, and
set brace-list-open to 0 for C and C++ modes.
gdbserver/ChangeLog:
* .dir-locals.el: Set sentence-end-double-space for all modes, and
set brace-list-open to 0 for C and C++ modes.
gdbsupport/ChangeLog:
* .dir-locals.el: Set sentence-end-double-space for all modes, and
set brace-list-open to 0 for C and C++ modes.
|
|
Instead of using a static buffer. This is safer, and we don't really
mind about any extra dynamic allocation here, since it's only used for
debug purposes.
gdb/ChangeLog:
* nat/linux-waitpid.c (status_to_str): Return std::string.
* nat/linux-waitpid.h (status_to_str): Likewise.
* linux-nat.c (linux_nat_post_attach_wait): Adjust.
(linux_nat_target::attach): Adjust.
(linux_handle_extended_wait): Adjust.
(wait_lwp): Adjust.
(stop_wait_callback): Adjust.
(linux_nat_filter_event): Adjust.
(linux_nat_wait_1): Adjust.
* nat/linux-waitpid.c (status_to_str): Adjust.
* nat/linux-waitpid.h (status_to_str): Adjust.
gdbserver/ChangeLog:
* linux-low.cc (linux_process_target::wait_for_event_filtered):
Adjust to status_to_str returning std::string.
Change-Id: Ia8aead70270438a5690f243e6faafff6c38ff757
|
|
Currently, in order to tell whether support for disabling address
space randomization on Linux is available, GDB checks if the
personality syscall works, at configure time. I.e., it does a run
test, instead of a compile/link test:
AC_RUN_IFELSE([PERSONALITY_TEST],
[have_personality=true],
[have_personality=false],
This is a bit bogus, because the machine the build is done on may not
(and is when you consider distro gdbs) be the machine that eventually
runs gdb. It would be better if this were a compile/link test
instead, and then at runtime, GDB coped with the personality syscall
failing. Actually, GDB already copes.
One environment where this is problematic is building GDB in a Docker
container -- by default, Docker runs the container with seccomp, with
a profile that disables the personality syscall. You can tell Docker
to use a less restricted seccomp profile, but I think we should just
fix it in GDB.
"man 2 personality" says:
This system call first appeared in Linux 1.1.20 (and thus first
in a stable kernel release with Linux 1.2.0); library support
was added in glibc 2.3.
...
ADDR_NO_RANDOMIZE (since Linux 2.6.12)
With this flag set, disable address-space-layout randomization.
glibc 2.3 was released in 2002.
Linux 2.6.12 was released in 2005.
The original patch that added the configure checks was submitted in
2008. The first version of the patch that was submitted to the list
called personality from common code:
https://sourceware.org/pipermail/gdb-patches/2008-June/058204.html
and then was moved to Linux-specific code:
https://sourceware.org/pipermail/gdb-patches/2008-June/058209.html
Since HAVE_PERSONALITY is only checked in Linux code, and
ADDR_NO_RANDOMIZE exists for over 15 years, I propose just completely
removing the configure checks.
If for some odd reason, some remotely modern system still needs a
configure check, then we can revert this commit but drop the
AC_RUN_IFELSE in favor of always doing the AC_LINK_IFELSE
cross-compile fallback.
gdb/ChangeLog:
* linux-nat.c (linux_nat_target::supports_disable_randomization):
Remove references to HAVE_PERSONALITY.
* nat/linux-personality.c: Remove references to HAVE_PERSONALITY.
(maybe_disable_address_space_randomization)
(~maybe_disable_address_space_randomizatio): Remove references to
HAVE_PERSONALITY.
* config.in, configure: Regenerate.
gdbserver/ChangeLog:
* linux-low.cc:
(linux_process_target::supports_disable_randomization): Remove
reference to HAVE_PERSONALITY.
* config.in, configure: Regenerate.
gdbsupport/ChangeLog:
* common.m4 (personality test): Remove.
|
|
Lancelot pointed out that since the refactor at:
https://sourceware.org/pipermail/gdb-patches/2015-January/120503.html
the sys/personality.h include is not needed in linux-low.cc anymore,
as it does not call personality directly itself anymore.
gdbserver/ChangeLog:
* linux-low.cc: Don't include sys/personality.h or define
ADDR_NO_RANDOMIZE.
|
|
The 'handle_v_attach', 'handle_v_run', and 'handle_v_kill' functions'
return values are unused. They indicate error/success result by
putting packets. Make the functions void.
Tested by rebuilding.
gdbserver/ChangeLog:
2021-05-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* server.cc (handle_v_attach)
(handle_v_run)
(handle_v_kill): Make void.
|
|
PR build/27807 points out that my recent changes to the Windows port
missed a spot in win32-i386-low.cc -- a call to
win32_Wow64GetThreadContext remained, causing link errors in
gdbserver. This happened because I tested an i686 build, but this
code is only used on an x86_64 build.
This patch fixes the bug. I am checking it in.
gdbserver/ChangeLog
2021-05-03 Tom Tromey <tromey@adacore.com>
PR build/27807:
* win32-i386-low.cc (i386_get_thread_context): Call
Wow64GetThreadContext, not win32_Wow64GetThreadContext.
|
|
This moves the new DLL-loading code into nat/windows-nat.c, and
changes both gdb and gdbserver to use the shared code. One
client-provided callback, handle_load_dll, is changed to allow the
code to be shared. This callback was actually never called from
nat/windows-nat.c; maybe I had planned to share more here and then
didn't finish... I'm not sure.
gdb/ChangeLog
2021-04-30 Tom Tromey <tromey@adacore.com>
* windows-nat.c (windows_nat::handle_load_dll): Update.
(windows_nat_target::get_windows_debug_event): Call
dll_loaded_event.
(windows_add_all_dlls, windows_add_dll): Move to
nat/windows-nat.c.
* nat/windows-nat.h (handle_load_dll): Change parameters.
(dll_loaded_event, windows_add_all_dlls): Declare.
* nat/windows-nat.c (windows_add_dll, windows_add_all_dlls): Move
from windows-nat.c.
(dll_loaded_event): New function.
gdbserver/ChangeLog
2021-04-30 Tom Tromey <tromey@adacore.com>
* win32-low.cc (do_initial_child_stuff): Update.
(windows_nat::handle_load_dll): Rename from win32_add_one_solib.
Change parameter type.
(win32_add_dll, win32_add_all_dlls)
(windows_nat::handle_load_dll): Remove.
(get_child_debug_event): Call dll_loaded_event.
|
|
This changes gdbserver to use the function indirection code that was
just moved into nat/windows-nat.[ch]. One additional function is used
by gdbserver that was not used by gdb.
gdb/ChangeLog
2021-04-30 Tom Tromey <tromey@adacore.com>
* nat/windows-nat.h (GenerateConsoleCtrlEvent): New define.
(GenerateConsoleCtrlEvent_ftype, GenerateConsoleCtrlEvent):
Declare.
* nat/windows-nat.c (GenerateConsoleCtrlEvent): Define.
(initialize_loadable): Initialize GenerateConsoleCtrlEvent.
gdbserver/ChangeLog
2021-04-30 Tom Tromey <tromey@adacore.com>
* win32-low.cc (GETPROCADDRESS): Remove.
(winapi_DebugActiveProcessStop, winapi_DebugSetProcessKillOnExit)
(winapi_DebugBreakProcess, winapi_GenerateConsoleCtrlEvent)
(winapi_Wow64SetThreadContext, win32_Wow64GetThreadContext)
(win32_Wow64SetThreadContext): Remove.
(win32_set_thread_context, do_initial_child_stuff)
(win32_process_target::attach, win32_process_target::detach):
Update.
(winapi_EnumProcessModules, winapi_EnumProcessModulesEx)
(winapi_GetModuleInformation, winapi_GetModuleInformationA):
Remove.
(win32_EnumProcessModules, win32_EnumProcessModulesEx)
(win32_GetModuleInformation, win32_GetModuleInformationA):
Remove.
(load_psapi): Remove.
(win32_add_dll, win32_process_target::request_interrupt): Update.
(initialize_low): Call initialize_loadable.
|
|
This removes the one last use of _WIN32_WCE from gdbserver.
gdbserver/ChangeLog
2021-04-14 Tom Tromey <tromey@adacore.com>
* win32-low.cc (windows_nat::handle_load_dll): Don't check
_WIN32_WCE.
|
|
gdbserver/ChangeLog:
* gdbreplay.c [__MINGW32CE__] (COUNTOF, errno, strerror): Remove.
|
|
I noticed that gdbserver/win32-low.cc has a few typedefs that are not
used. This patch removes them.
gdbserver/ChangeLog
2021-04-13 Tom Tromey <tromey@adacore.com>
* win32-low.cc (winapi_CreateToolhelp32Snapshot)
(winapi_Module32First, winapi_Module32Next): Remove typedefs.
|
|
Now that the WinCE port is gone, all ports map host I/O errors from
errno, so this abstraction is no longer necessary.
Basically undoes:
https://sourceware.org/pipermail/gdb-patches/2008-January/055511.html
https://sourceware.org/pipermail/gdb-patches/attachments/20080131/f44e7012/attachment.bin
gdbserver/ChangeLog:
* Makefile.in (SFILES): Remove hostio-errno.cc.
* configure: Regenerate.
* configure.ac (GDBSERVER_DEPFILES): No longer add
$srv_hostio_err_objs.
* configure.srv (srv_hostio_err_objs): Delete.
* hostio-errno.cc: Delete.
* hostio.cc (hostio_error): Inline hostio_last_error_from_errno
here.
* hostio.h (hostio_last_error_from_errno): Delete.
* target.cc (process_stratum_target::hostio_last_error): Delete.
* target.h (class process_stratum_target) <hostio_last_error>:
Delete.
|
|
The support for WinCE was removed with commit 84b300de3666 ("gdbserver:
remove support for ARM/WinCE"). There is some leftover code for WinCE
support, guarded by the _WIN32_WCE macro, which I didn't know of at the
time.
I didn't remove the _WIN32_WCE references in the tests, because in
theory we still support the WinCE architecture in GDB (when debugging
remotely). So someone could run a test with that (although I'd be
really surprised).
gdb/ChangeLog:
* nat/windows-nat.c: Remove all code guarded by _WIN32_WCE.
* nat/windows-nat.h: Likewise.
gdbserver/ChangeLog:
* win32-low.cc: Remove all code guarded by _WIN32_WCE.
* win32-low.h: Likewise.
Change-Id: I7a871b897e2135dc195b10690bff2a01d9fac05a
|
|
gdbserver/ChangeLog:
2021-04-12 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* target.h (class process_stratum_target) <pid_to_exec_file>:
Constify the return type. Update the definition/references below.
* target.cc (process_stratum_target::pid_to_exec_file)
* linux-low.h (class linux_process_target) <pid_to_exec_file>
* linux-low.cc (linux_process_target::pid_to_exec_file)
* netbsd-low.h (class netbsd_process_target) <pid_to_exec_file>
* netbsd-low.cc (netbsd_process_target::pid_to_exec_file)
* server.cc (handle_qxfer_exec_file)
|
|
This fixes win32-low.cc in the same way as a recent change in
windows-nat.c did for GDB: if the lpImageName member of the load-DLL
debug event doesn't allow us to find the file name of the DLL, then
loop over all the DLLs mapped into the inferior to find the one loaded
at the same base address as given by the lpBaseOfDll member of the
debug event.
gdbserver/ChangeLog:
2021-04-11 Eli Zaretskii <eliz@gnu.org>
* win32-low.cc (win32_add_dll): New function, with body almost
identical to what win32_add_all_dlls did. Accepts one argument;
if that is non-NULL, returns the file name of the DLL that is
loaded at the base address equal to that argument, or NULL if not
found. If the argument is NULL, add all the DLLs loaded by the
inferior to the list of solibs and return NULL.
(win32_add_all_dlls): Now a thin wrapper around win32_add_dll.
(windows_nat::handle_load_dll) [!_WIN32_WCE]: If get_image_name
failed to glean the file name of the DLL, call win32_add_dll to
try harder using the lpBaseOfDll member of the load-DLL event.
|
|
During reviews, I changed the success/failure variables from int to bool, but
missed updating the code in a couple spots. Given the logic inversion, the
gdbserver code fails instead of succeeding.
Fixed with the following patch. Seems fairly obvious, so I'll push it soon.
gdbserver/ChangeLog:
2021-03-30 Luis Machado <luis.machado@linaro.org>
* server.cc (handle_general_set, handle_query): Update variable
to bool and fix verification logic.
|
|
Adds the AArch64-specific memory tagging support (MTE) by implementing the
required hooks and checks for GDBserver.
gdbserver/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* Makefile.in (SFILES): Add /../gdb/nat/aarch64-mte-linux-ptrace.c.
* configure.srv (aarch64*-*-linux*): Add arch/aarch64-mte-linux.o and
nat/aarch64-mte-linux-ptrace.o.
* linux-aarch64-low.cc: Include nat/aarch64-mte-linux-ptrace.h.
(class aarch64_target) <supports_memory_tagging>
<fetch_memtags, store_memtags>: New method overrides.
(aarch64_target::supports_memory_tagging)
(aarch64_target::fetch_memtags)
(aarch64_target::store_memtags): New methods.
|
|
AArch64 MTE support in the Linux kernel exposes a new register
through ptrace. This patch adds the required code to support it.
include/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* elf/common.h (NT_ARM_TAGGED_ADDR_CTRL): Define.
gdb/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* aarch64-linux-nat.c (fetch_mteregs_from_thread): New function.
(store_mteregs_to_thread): New function.
(aarch64_linux_nat_target::fetch_registers): Update to call
fetch_mteregs_from_thread.
(aarch64_linux_nat_target::store_registers): Update to call
store_mteregs_to_thread.
* aarch64-tdep.c (aarch64_mte_register_names): New struct.
(aarch64_cannot_store_register): Handle MTE registers.
(aarch64_gdbarch_init): Initialize and setup MTE registers.
* aarch64-tdep.h (gdbarch_tdep) <mte_reg_base>: New field.
<has_mte>: New method.
* arch/aarch64-linux.h (AARCH64_LINUX_SIZEOF_MTE): Define.
gdbserver/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* linux-aarch64-low.cc (aarch64_fill_mteregset): New function.
(aarch64_store_mteregset): New function.
(aarch64_regsets): Add MTE register set entry.
(aarch64_sve_regsets): Add MTE register set entry.
|
|
This patch adds a target description and feature "mte" for aarch64.
It includes one new register, tag_ctl, that can be used to configure the
tag generation rules and sync/async modes. It is 64-bit in size.
The patch also adjusts the code that creates the target descriptions at
runtime based on CPU feature checks.
gdb/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::read_description): Take MTE flag into
account.
Slight refactor to hwcap flag checking.
* aarch64-linux-tdep.c
(aarch64_linux_core_read_description): Likewise.
* aarch64-tdep.c (tdesc_aarch64_list): Add one more dimension for
MTE.
(aarch64_read_description): Add mte_p parameter and update to use it.
Update the documentation.
(aarch64_gdbarch_init): Update call to aarch64_read_description.
* aarch64-tdep.h (aarch64_read_description): Add mte_p parameter.
* arch/aarch64.c: Include ../features/aarch64-mte.c.
(aarch64_create_target_description): Add mte_p parameter and update
the code to use it.
* arch/aarch64.h (aarch64_create_target_description): Add mte_p
parameter.
* features/Makefile (FEATURE_XMLFILES): Add aarch64-mte.xml.
* features/aarch64-mte.c: New file, generated.
* features/aarch64-mte.xml: New file.
gdbserver/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* linux-aarch64-ipa.cc (get_ipa_tdesc): Update call to
aarch64_linux_read_description.
(initialize_low_tracepoint): Likewise.
* linux-aarch64-low.cc (aarch64_target::low_arch_setup): Take MTE flag
into account.
* linux-aarch64-tdesc.cc (tdesc_aarch64_list): Add one more dimension
for MTE.
(aarch64_linux_read_description): Add mte_p parameter and update to
use it.
* linux-aarch64-tdesc.h (aarch64_linux_read_description): Add mte_p
parameter.
|
|
This patch is a preparation for the next patches implementing MTE. It just adds
a HWCAP2 constant for MTE, creates a new generic arch/aarch64-mte-linux.h file
and includes that file in the source files that will use it.
gdb/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* Makefile.in (HFILES_NO_SRCDIR): Add arch/aarch64-mte-linux.h.
* aarch64-linux-nat.c: Include arch/aarch64-mte-linux.h.
* aarch64-linux-tdep.c: Likewise
* arch/aarch64-mte-linux.h: New file.
gdbserver/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* linux-aarch64-low.cc: Include arch/aarch64-mte-linux.h.
|
|
Add some unit testing to exercise the functions handling the qMemTags and
QMemTags packets as well as feature support.
gdbserver/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* server.cc (test_memory_tagging_functions): New function.
(captured_main): Register test_memory_tagging_functions.
|
|
This patch adds the generic remote bits to gdbserver so it can check for memory
tagging support and handle fetch tags and store tags requests.
gdbserver/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* remote-utils.cc (decode_m_packet_params): Renamed from ...
(decode_m_packet): ... this, which now calls decode_m_packet_params.
Make char * param/return const char *.
(decode_M_packet): Use decode_m_packet_params and make char * param
const char *.
* remote-utils.h (decode_m_packet_params): New prototype.
(decode_m_packet): Constify char pointers.
(decode_M_packet): Likewise.
* server.cc (create_fetch_memtags_reply)
(parse_store_memtags_request): New
functions.
(handle_general_set): Handle the QMemTags packet.
(parse_fetch_memtags_request): New function.
(handle_query): Handle the qMemTags packet and advertise memory
tagging support.
(captured_main): Initialize memory tagging flag.
* server.h (struct client_state): Initialize memory tagging flag.
* target.cc (process_stratum_target::supports_memory_tagging)
(process_stratum_target::fetch_memtags)
(process_stratum_target::store_memtags): New methods.
* target.h: Include gdbsupport/byte-vector.h.
(class process_stratum_target) <supports_memory_tagging>
<fetch_memtags, store_memtags>: New class virtual methods.
(target_supports_memory_tagging): Define.
|
|
The 'all_dlls' list is global. This would cause the complete dll list
to be reported for individual processes. Move the list into the
process_info struct.
Currently the dll list is used only by the win32-low target, which
does not support the multi-process feature. Therefore, it practically
does not matter whether the list is global or per-process. However,
there may be targets that are outside the binutils-gdb repo (e.g. we,
at Intel, have such a target) that have multi-process and use the dll
list. So, it makes sense to do the right thing.
gdbserver/ChangeLog:
2021-03-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* inferiors.h (struct process_info) <all_dlls, dlls_changed>: New
fields.
* dll.h (loaded_dll)
(unloaded_dll): Declare an overloaded version that takes a proc
parameter.
* dll.cc (loaded_dll)
(unloaded_dll): Implement the overloaded versions.
(clear_dlls): Clear all process' dll lists.
(all_dlls, dlls_changed): Remove the global variables.
* remote-utils.cc (prepare_resume_reply): Update to consider a dll
list per proc.
* server.cc (handle_qxfer_libraries): Ditto.
(handle_v_attach): Ditto.
(captured_main): Ditto.
|
