aboutsummaryrefslogtreecommitdiff
path: root/gdbserver
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21gdbserver: use target_waitstatus::to_string in 'prepare_resume_reply'Tankut Baris Aktemur1-2/+3
Use the to_string method of target_waitstatus in 'prepare_resume_reply' for a more readable log message. Approved-By: Tom Tromey <tom@tromey.com>
2023-06-05[gdb] Fix more typosTom de Vries1-1/+1
Fix some more typos: - distinquish -> distinguish - actualy -> actually - singe -> single - frash -> frame - chid -> child - dissassembler -> disassembler - uninitalized -> uninitialized - precontidion -> precondition - regsiters -> registers - marge -> merge - sate -> state - garanteed -> guaranteed - explictly -> explicitly - prefices (nonstandard plural) -> prefixes - bondary -> boundary - formated -> formatted - ithe -> the - arrav -> array - coresponding -> corresponding - owend -> owned - fials -> fails - diasm -> disasm - ture -> true - tpye -> type There's one code change, the name of macro SIG_CODE_BONDARY_FAULT changed to SIG_CODE_BOUNDARY_FAULT. Tested on x86_64-linux.
2023-06-03[gdb] Fix typosTom de Vries11-11/+11
Fix a few typos: - implemention -> implementation - convertion(s) -> conversion(s) - backlashes -> backslashes - signoring -> ignoring - (un)ambigious -> (un)ambiguous - occured -> occurred - hidding -> hiding - temporarilly -> temporarily - immediatelly -> immediately - sillyness -> silliness - similiar -> similar - porkuser -> pokeuser - thats -> that - alway -> always - supercede -> supersede - accomodate -> accommodate - aquire -> acquire - priveleged -> privileged - priviliged -> privileged - priviledges -> privileges - privilige -> privilege - recieve -> receive - (p)refered -> (p)referred - succesfully -> successfully - successfuly -> successfully - responsability -> responsibility - wether -> whether - wich -> which - disasbleable -> disableable - descriminant -> discriminant - construcstor -> constructor - underlaying -> underlying - underyling -> underlying - structureal -> structural - appearences -> appearances - terciarily -> tertiarily - resgisters -> registers - reacheable -> reachable - likelyhood -> likelihood - intepreter -> interpreter - disassemly -> disassembly - covnersion -> conversion - conviently -> conveniently - atttribute -> attribute - struction -> struct - resonable -> reasonable - popupated -> populated - namespaxe -> namespace - intialize -> initialize - identifer(s) -> identifier(s) - expection -> exception - exectuted -> executed - dungerous -> dangerous - dissapear -> disappear - completly -> completely - (inter)changable -> (inter)changeable - beakpoint -> breakpoint - automativ -> automatic - alocating -> allocating - agressive -> aggressive - writting -> writing - reguires -> requires - registed -> registered - recuding -> reducing - opeartor -> operator - ommitted -> omitted - modifing -> modifying - intances -> instances - imbedded -> embedded - gdbaarch -> gdbarch - exection -> execution - direcive -> directive - demanged -> demangled - decidely -> decidedly - argments -> arguments - agrument -> argument - amespace -> namespace - targtet -> target - supress(ed) -> suppress(ed) - startum -> stratum - squence -> sequence - prompty -> prompt - overlow -> overflow - memember -> member - languge -> language - geneate -> generate - funcion -> function - exising -> existing - dinking -> syncing - destroh -> destroy - clenaed -> cleaned - changep -> changedp (name of variable) - arround -> around - aproach -> approach - whould -> would - symobl -> symbol - recuse -> recurse - outter -> outer - freeds -> frees - contex -> context Tested on x86_64-linux. Reviewed-By: Tom Tromey <tom@tromey.com>
2023-06-03[gdbserver] Fix typo in debug messageTom de Vries1-1/+1
I noticed in emit_ops_insns in gdbserver/linux-aarch64-low.cc: ... threads_debug_printf ("Adding %d instrucions at %s", ... Fix the typo by using "instructions" instead. Reviewed-By: Tom Tromey <tom@tromey.com>
2023-05-08gdbserver: Clear upper ZMM registers in the right location.John Baldwin1-1/+1
This was previously clearing the upper 32 bytes of ZMM0-15 rather than ZMM16-31. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-04-03gdbserver: allow agent expressions to fail with invalid memory accessAndrew Burgess2-5/+10
This commit extends gdbserver to take account of a failed memory access from agent_mem_read, and to return a new eval_result_type expr_eval_invalid_memory_access. I have only updated the agent_mem_read calls related directly to reading memory, I have not updated any of the calls related to tracepoint data collection. This is just because I'm not familiar with that area of gdb/gdbserver, and I don't want to break anything, so leaving the existing behaviour untouched seems like the safest approach. I've then updated gdb.base/bp-cond-failure.exp to test evaluating the breakpoints on the target, and have also extended the test so that it checks for different sizes of memory access.
2023-04-03gdbserver: allows agent_mem_read to return an error codeAndrew Burgess2-9/+11
Currently the gdbserver function agent_mem_read ignores any errors from calling read_inferior_memory. This means that if there is an attempt to access invalid memory then this will appear to succeed. In this patch I update agent_mem_read so that if read_inferior_memory fails, agent_mem_read will return an error code. However, none of the callers of agent_mem_read actually check the return value, so this commit will have no effect on anything. In the next commit I will update the users of agent_mem_read to check for the error code. I've also updated the header comments on agent_mem_read to better reflect what the function does, and its possible return values.
2023-03-09gdb, gdbserver, gdbsupport: fix whitespace issuesSimon Marchi1-1/+1
Replace spaces with tabs in a bunch of places. Change-Id: If0f87180f1d13028dc178e5a8af7882a067868b0
2023-03-01Fix btrace regressionTom Tromey1-1/+1
Tom de Vries pointed out that my earlier patch: commit 873a185be258ad2552b9579005852815b4da5baf Date: Fri Dec 16 07:56:57 2022 -0700 Don't use struct buffer in handle_qxfer_btrace regressed gdb.btrace/reconnect.exp. I didn't notice this because I did not have libipt installed. This patch fixes the bug. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30169 Tested-By: Bruno Larsen <blarsen@redhat.com>
2023-02-24gdbserver/linux-low.cc: Fix a typo in ternary operatorKhem Raj1-1/+1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2023-02-24Remove struct bufferTom Tromey1-1/+0
I've long wanted to remove 'struct buffer', and thanks to Simon's earlier patch, I was finally able to do so. My feeling has been that gdb already has several decent structures available for growing strings: std::string of course, but also obstack and even objalloc from BFD and dyn-string from libiberty. The previous patches in this series removed all the uses of struct buffer, so this one can remove the code and the remaining #includes.
2023-02-24Don't use struct buffer in handle_qxfer_threadsTom Tromey1-28/+17
This changes handle_qxfer_threads, in gdbserver, to use std::string rather than struct buffer.
2023-02-24Don't use struct buffer in handle_qxfer_btraceTom Tromey5-62/+61
This changes handle_qxfer_btrace and handle_qxfer_btrace_conf, in gdbserver, to use std::string rather than struct buffer.
2023-02-24Don't use struct buffer in handle_qxfer_traceframe_infoTom Tromey3-30/+19
This changes handle_qxfer_traceframe_info, in gdbserver, to use std::string rather than struct buffer.
2023-02-14Do not cast away const in agent_run_commandTom Tromey2-1/+6
While investigating something else, I noticed some weird code in agent_run_command (use of memcpy rather than strcpy). Then I noticed that 'cmd' is used as both an in and out parameter, despite being const. Casting away const like this is bad. This patch removes the const and fixes the memcpy. I also added a static assert to assure myself that the code in gdbserver is correct -- gdbserver is passing its own buffer directly to agent_run_command. Reviewed-By: Andrew Burgess <aburgess@redhat.com>
2023-02-10Move implementation of perror_with_name to gdbsupportAaron Merey1-22/+0
gdbsupport/errors.h declares perror_with_name and leaves the implementation to the clients. However gdb and gdbserver's implementations are essentially the same, resulting in unnecessary code duplication. Fix this by implementing perror_with_name in gdbsupport. Add an optional parameter for specifying the errno used to generate the error message. Also move the implementation of perror_string to gdbsupport since perror_with_name requires it. Approved-By: Tom Tromey <tom@tromey.com>
2023-02-01gdbserver: Add PID parameter to linux_get_auxv and linux_get_hwcapThiago Jung Bauermann11-37/+36
This patch doesn't change gdbserver behaviour, but after later changes are made it avoids a null pointer dereference when HWCAP needs to be obtained for a specific process while current_thread is nullptr. Fixing linux_read_auxv, linux_get_hwcap and linux_get_hwcap2 to take a PID parameter seems more correct than setting current_thread in one particular code path. Changes are propagated to allow passing the new parameter through the call chain. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-01gdbserver: Add assert in find_register_by_numberThiago Jung Bauermann1-2/+3
It helped me during development, catching bugs closer to when they actually happened. Also remove the equivalent gdb_assert in regcache_raw_read_unsigned, since it's checking the same condition a few frames above. Suggested-By: Simon Marchi <simon.marchi@efficios.com> Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-01-18Fix 'make TAGS' in gdbserverTom Tromey1-3/+4
PR build/29003 points out that "make TAGS" is broken in gdbserver. This patch fixes the problem that is pointed out there, plus another one I noticed while working on that -- namely that the "sed" computes the wrong names for some source files. Finally, a couple of obsolete variable references are removed. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29003
2023-01-13gdbserver: add comments to read_inferior_memory functionAndrew Burgess3-0/+7
Just adding some comments to the gdbserver read_inferior_memory function. No actual code changes.
2023-01-11Set _WIN32_WINNT in common.m4 configure checkTom Tromey1-1/+11
GCC recently added support for the Windows thread model, enabling libstdc++ to support Windows natively. However, this supporrt requires a version of Windows later than the minimum version that is supported by GDB. PR build/29966 points out that the GDB configure test for std::thread does not work in this situation, because _WIN32_WINNT is not defined in test program, and so <thread> seems to be fine. This patch is an attempt to fix the problem, by using the same setting for _WIN32_WINNT at configure time as is used at build time. I don't have access to one of the older systems so I don't think I can truly test this. I did do a mingw cross build, though. I'm going to ask the bug reporter to test it. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29966
2023-01-05gdbsupport: move libxxhash configure check to gdbsupportSimon Marchi2-0/+517
The following patch moves the fast_hash function, which uses libxxhash, to gdbsupport. Move the libxxhash configure check to gdbsupport (and transitively to gdbserver). Change-Id: I242499e50c8cd6fe9f51e6e92dc53a1b3daaa96e Approved-By: Andrew Burgess <aburgess@redhat.com>
2023-01-01Update copyright year range in header of all files managed by GDBJoel Brobecker88-88/+88
This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023.
2023-01-01Update copyright year in help message of gdb, gdbserver, gdbreplayJoel Brobecker2-4/+4
This commit updates the copyright year displayed by gdb, gdbserver and gdbreplay's help message from 2022 to 2023, as per our Start of New Year procedure. The corresponding source files' copyright header are also updated accordingly.
2022-12-16[aarch64] Fix removal of non-address bits for PAuthLuis Machado1-12/+21
PR gdb/28947 The address_significant gdbarch setting was introduced as a way to remove non-address bits from pointers, and it is specified by a constant. This constant represents the number of address bits in a pointer. Right now AArch64 is the only architecture that uses it, and 56 was a correct option so far. But if we are using Pointer Authentication (PAuth), we might use up to 2 bytes from the address space to store the required information. We could also have cases where we're using both PAuth and MTE. We could adjust the constant to 48 to cover those cases, but this doesn't cover the case where GDB needs to sign-extend kernel addresses after removal of the non-address bits. This has worked so far because bit 55 is used to select between kernel-space and user-space addresses. But trying to clear a range of bits crossing the bit 55 boundary requires the hook to be smarter. The following patch renames the gdbarch hook from significant_addr_bit to remove_non_address_bits and passes a pointer as opposed to the number of bits. The hook is now responsible for removing the required non-address bits and sign-extending the address if needed. While at it, make GDB and GDBServer share some more code for aarch64 and add a new arch-specific testcase gdb.arch/aarch64-non-address-bits.exp. Bug-url: https://sourceware.org/bugzilla/show_bug.cgi?id=28947 Approved-By: Simon Marchi <simon.marchi@efficios.com>
2022-12-15gdbsupport: change xml_escape_text_append's parameter from pointer to referenceSimon Marchi2-2/+2
The passed in string can't be nullptr, it makes more sense to pass in a reference. Change-Id: Idc8bd38abe1d6d9b44aa227d7856956848c233b3
2022-12-09[aarch64] Add TPIDR2 register support for LinuxLuis Machado3-9/+40
With the AArch64 Scalable Matrix Extension we have a new TPIDR2 register, and it will be added to the existing NT_ARM_TLS register set. Kernel patches are being reviewed here: https://lore.kernel.org/linux-arm-kernel/20220818170111.351889-1-broonie@kernel.org/ From GDB's perspective, we handle it in a similar way to the existing TPIDR register. But we need to consider cases of systems that only have TPIDR and systems that have both TPIDR and TPIDR2. With that in mind, the following patch adds the required code to support TPIDR2 and turns the org.gnu.gdb.aarch64.tls feature into a dynamically-generated target description as opposed to a static target description containing only TPIDR. That means we can remove the gdb/features/aarch64-tls.xml file and replace the existing gdb/features/aarch64-tls.c auto-generated file with a new file that dynamically generates the target description containing either TPIDR alone or TPIDR and TPIDR2. In the future, when *BSD's start to support this register, they can just enable it as is being done for the AArch64 Linux target. The core file read/write code has been updated to support TPIDR2 as well. On GDBserver's side, there is a small change to the find_regno function to expose a non-throwing version of it. It always seemed strange to me how find_regno causes the whole operation to abort if it doesn't find a particular register name. The patch moves code from find_regno into find_regno_no_throw and makes find_regno call find_regno_no_throw instead. This allows us to do register name lookups to find a particular register number without risking erroring out if nothing is found. The patch also adjusts the feature detection code for aarch64-fbsd, since the infrastructure is shared amongst all aarch64 targets. I haven't added code to support TPIDR2 in aarch64-fbsd though, as I'm not sure when/if that will happen.
2022-11-28gdbserver: switch to right process in find_one_threadSimon Marchi1-12/+17
New in this version: add a dedicated test. When I do this: $ ./gdb -nx --data-directory=data-directory -q \ /bin/sleep \ -ex "maint set target-non-stop on" \ -ex "tar ext :1234" \ -ex "set remote exec-file /bin/sleep" \ -ex "run 1231 &" \ -ex add-inferior \ -ex "inferior 2" Reading symbols from /bin/sleep... (No debugging symbols found in /bin/sleep) Remote debugging using :1234 Starting program: /bin/sleep 1231 Reading /lib64/ld-linux-x86-64.so.2 from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /lib64/ld-linux-x86-64.so.2 from remote target... Reading /usr/lib/debug/.build-id/a6/7a1408f18db3576757eea210d07ba3fc560dff.debug from remote target... [New inferior 2] Added inferior 2 on connection 1 (extended-remote :1234) [Switching to inferior 2 [<null>] (<noexec>)] (gdb) Reading /lib/x86_64-linux-gnu/libc.so.6 from remote target... attach 3659848 Attaching to process 3659848 /home/smarchi/src/binutils-gdb/gdb/thread.c:85: internal-error: inferior_thread: Assertion `current_thread_ != nullptr' failed. Note the "attach" command just above. When doing it on the command-line with a -ex switch, the bug doesn't trigger. The internal error of GDB is actually caused by GDBserver crashing, and the error recovery of GDB is not on point. This patch aims to fix just the GDBserver crash, not the GDB problem. GDBserver crashes with a segfault here: (gdb) bt #0 0x00005555557fb3f4 in find_one_thread (ptid=...) at /home/smarchi/src/binutils-gdb/gdbserver/thread-db.cc:177 #1 0x00005555557fd5cf in thread_db_thread_handle (ptid=<error reading variable: Cannot access memory at address 0xffffffffffffffa0>, handle=0x7fffffffc400, handle_len=0x7fffffffc3f0) at /home/smarchi/src/binutils-gdb/gdbserver/thread-db.cc:461 #2 0x000055555578a0b6 in linux_process_target::thread_handle (this=0x5555558a64c0 <the_x86_target>, ptid=<error reading variable: Cannot access memory at address 0xffffffffffffffa0>, handle=0x7fffffffc400, handle_len=0x7fffffffc3f0) at /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:6905 #3 0x00005555556dfcc6 in handle_qxfer_threads_worker (thread=0x60b000000510, buffer=0x7fffffffc8a0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1645 #4 0x00005555556e00e6 in operator() (__closure=0x7fffffffc5e0, thread=0x60b000000510) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1696 #5 0x00005555556f54be in for_each_thread<handle_qxfer_threads_proper(buffer*)::<lambda(thread_info*)> >(struct {...}) (func=...) at /home/smarchi/src/binutils-gdb/gdbserver/gdbthread.h:159 #6 0x00005555556e0242 in handle_qxfer_threads_proper (buffer=0x7fffffffc8a0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1694 #7 0x00005555556e04ba in handle_qxfer_threads (annex=0x629000000213 "", readbuf=0x621000019100 '\276' <repeats 200 times>..., writebuf=0x0, offset=0, len=4097) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1732 #8 0x00005555556e1989 in handle_qxfer (own_buf=0x629000000200 "qXfer:threads", packet_len=26, new_packet_len_p=0x7fffffffd630) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:2045 #9 0x00005555556e720a in handle_query (own_buf=0x629000000200 "qXfer:threads", packet_len=26, new_packet_len_p=0x7fffffffd630) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:2685 #10 0x00005555556f1a01 in process_serial_event () at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4176 #11 0x00005555556f4457 in handle_serial_event (err=0, client_data=0x0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4514 #12 0x0000555555820f56 in handle_file_event (file_ptr=0x607000000250, ready_mask=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:573 #13 0x0000555555821895 in gdb_wait_for_event (block=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:694 #14 0x000055555581f533 in gdb_do_one_event (mstimeout=-1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:264 #15 0x00005555556ec9fb in start_event_loop () at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3512 #16 0x00005555556f0769 in captured_main (argc=4, argv=0x7fffffffe0d8) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3992 #17 0x00005555556f0e3f in main (argc=4, argv=0x7fffffffe0d8) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4078 The reason is a wrong current process when find_one_thread is called. The current process is the 2nd one, which was just attached. It does not yet have thread_db data (proc->priv->thread_db is nullptr). As we iterate on all threads of all process to fulfull the qxfer:threads:read request, we get to a thread of process 1 for which we haven't read thread_db information yet (lwp_info::thread_known is false), so we get into find_one_thread. find_one_thread uses `current_process ()->priv->thread_db`, assuming the current process matches the ptid passed as a parameter, which is wrong. A segfault happens when trying to dereference that thread_db pointer. Fix this by making find_one_thread not assume what the current process / current thread is. If it needs to call into libthread_db, which we know will try to read memory from the current process, then temporarily set the current process. In the case where the thread is already know and we return early, we don't need to switch process. Add a test to reproduce this specific situation. Change-Id: I09b00883e8b73b7e5f89d0f47cb4e9c0f3d6caaa Approved-By: Andrew Burgess <aburgess@redhat.com>
2022-11-27[gdb/server] Emit warning for SIGINT failureTom de Vries1-1/+4
Consider the executable from test-case gdb.base/interrupt-daemon.exp. When starting it using gdbserver: ... $ ./build/gdbserver/gdbserver localhost:2345 \ ./outputs/gdb.base/interrupt-daemon/interrupt-daemon ... and connecting to it using gdb: ... $ gdb -q -ex "target remote localhost:2345" \ -ex "set follow-fork-mode child" \ -ex "break daemon_main" -ex cont ... we are setup to do the same as in the test-case: interrupt a running inferior using ^C. So let's try: ... (gdb) continue Continuing. ^C ... After pressing ^C, nothing happens. This a known problem, filed as PR remote/18772. The problem is that in linux_process_target::request_interrupt, a kill is used to send a SIGINT, but it fails. And it fails silently. Make the failure verbose by adding a warning, such that the gdbserver output becomes more helpful: ... Process interrupt-daemon created; pid = 15068 Listening on port 2345 Remote debugging from host ::1, port 35148 Detaching from process 15068 Detaching from process 15085 gdbserver: Sending SIGINT to process group of pid 15068 failed: \ No such process ... Note that the failure can easily be reproduced using the test-case and target board native-gdbserver: ... (gdb) continue^M Continuing.^M PASS: gdb.base/interrupt-daemon.exp: fg: continue ^CFAIL: gdb.base/interrupt-daemon.exp: fg: ctrl-c stops process (timeout) ... as reported in PR server/23382. Tested on x86_64-linux. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2022-11-18gdbserver/linux-x86: move lwp declaration out of __x86_64__ regionSimon Marchi1-1/+1
Commit 4855cbdc3d8f ("gdbserver/linux-x86: make is_64bit_tdesc accept thread as a parameter") caused this when building in 32 bits / i386 mode: CXX linux-x86-low.o In file included from /home/smarchi/src/binutils-gdb/gdbserver/linux-x86-low.cc:24: /home/smarchi/src/binutils-gdb/gdbserver/linux-x86-low.cc: In member function ‘virtual int x86_target::low_get_thread_area(int, CORE_ADDR*)’: /home/smarchi/src/binutils-gdb/gdbserver/linux-x86-low.cc:357:47: error: ‘lwp’ was not declared in this scope 357 | struct thread_info *thr = get_lwp_thread (lwp); | ^~~ /home/smarchi/src/binutils-gdb/gdbserver/linux-low.h:709:31: note: in definition of macro ‘get_lwp_thread’ 709 | #define get_lwp_thread(lwp) ((lwp)->thread) | ^~~ This is because it moved the lwp variable declaration inside the __x86_64__ guard, making it unavailable when building in 32 bits mode. Move the lwp variable outside of the __x86_64__ region. Change-Id: I7fa3938c6b44b345c27a52c8b8d3ea12aba53e05
2022-11-18gdbserver: use current_process in ps_getpidSimon Marchi1-1/+1
The following patch ("gdbserver: switch to right process in find_one_thread") makes it so find_one_thread calls into libthread_db with a current process but no current thread. This tripped on ps_getpid using current_thread in order to get the process' pid. Get the pid from `current_process ()` instead, which removes the need to have a current thread. Eventually, it would be good to get it from the gdb_ps_prochandle_t structure, to avoid the need for a current process as well. Reviewed-By: Andrew Burgess <aburgess@redhat.com> Change-Id: I9d2fae266419199a2fbc2fde0a5104c6e0dbd2d5
2022-11-18gdbserver/linux-x86: make is_64bit_tdesc accept thread as a parameterSimon Marchi1-14/+16
ps_get_thread_area receives as a parameter the lwpid it must work on. It then calls is_64bit_tdesc, which uses the current_thread as the thread to work on. However, it is not said that both are the same. This became a problem when working in a following patch that makes find_one_thread switch to a process but to no thread (current_thread == nullptr). When libthread_db needed to get the thread area, is_64bit_tdesc would try to get the regcache of a nullptr thread. Fix that by making is_64bit_tdesc accept the thread to work on as a parameter. Find the right thread from the context, when possible (when we know the lwpid to work on). Otherwise, pass "current_thread", to retain the existing behavior. Reviewed-By: Andrew Burgess <aburgess@redhat.com> Change-Id: I44394d6be92392fa28de71982fd04517ce8a3007
2022-11-18gdbserver/linux: take condition out of callback in find_lwp_pidSimon Marchi1-2/+2
Just a small optimization, it's not necessary to recompute lwp at each iteration. While at it, change the variable type to long, as ptid_t::lwp returns a long. Reviewed-By: Andrew Burgess <aburgess@redhat.com> Change-Id: I181670ce1f90b59cb09ea4899367750be2ad9105
2022-11-09gdbserver: do not report btrace support if target does not announce itTankut Baris Aktemur5-1/+19
Gdbserver unconditionally reports support for btrace packets. Do not report the support, if the underlying target does not say it supports it. Otherwise GDB would query the server with btrace-related packets unnecessarily.
2022-10-19internal_error: remove need to pass __FILE__/__LINE__Pedro Alves11-68/+37
Currently, every internal_error call must be passed __FILE__/__LINE__ explicitly, like: internal_error (__FILE__, __LINE__, "foo %d", var); The need to pass in explicit __FILE__/__LINE__ is there probably because the function predates widespread and portable variadic macros availability. We can use variadic macros nowadays, and in fact, we already use them in several places, including the related gdb_assert_not_reached. So this patch renames the internal_error function to something else, and then reimplements internal_error as a variadic macro that expands __FILE__/__LINE__ itself. The result is that we now should call internal_error like so: internal_error ("foo %d", var); Likewise for internal_warning. The patch adjusts all calls sites. 99% of the adjustments were done with a perl/sed script. The non-mechanical changes are in gdbsupport/errors.h, gdbsupport/gdb_assert.h, and gdb/gdbarch.py. Approved-By: Simon Marchi <simon.marchi@efficios.com> Change-Id: Ia6f372c11550ca876829e8fd85048f4502bdcf06
2022-10-18gdb, gdbserver: extend RSP to support namespacesMarkus Metzger1-9/+17
Introduce a new qXfer:libraries-svr4:read annex key/value pair lmid=<namespace identifier> to be used together with start and prev to provide the namespace of start and prev to gdbserver. Unknown key/value pairs are ignored by gdbserver so no new supports check is needed. Introduce a new library-list-svr4 library attribute lmid to provide the namespace of a library entry to GDB. This implementation uses the address of a namespace's r_debug object as namespace identifier. This should have incremented the minor version but since unknown XML attributes are ignored, anyway, and since changing the version results in a warning from GDB, the version is left at 1.0.
2022-10-18gdbserver: move main_lm handling into callerMarkus Metzger1-48/+48
When listing SVR4 shared libraries, special care has to be taken about the first library in the default namespace as that refers to the main executable. The load map address of this main executable is provided in an attribute of the library-list-svr4 element. Move that code from where we enumerate libraries inside a single namespace to where we generate the rest of the library-list-svr4 element. This allows us to complete the library-list-svr4 element inside one function. There should be no functional change.
2022-10-18gdb, gdbserver: support dlmopen()Markus Metzger1-94/+153
In glibc, the r_debug structure contains (amongst others) the following fields: int r_version: Version number for this protocol. It should be greater than 0. If r_version is 2, struct r_debug is extended to struct r_debug_extended with one additional field: struct r_debug_extended *r_next; Link to the next r_debug_extended structure. Each r_debug_extended structure represents a different namespace. The first r_debug_extended structure is for the default namespace. 1. Change solib_svr4_r_map argument to take the debug base. 2. Add solib_svr4_r_next to find the link map in the next namespace from the r_next field. 3. Update svr4_current_sos_direct to get the link map in the next namespace from the r_next field. 4. Don't check shared libraries in other namespaces when updating shared libraries in a new namespace. 5. Update svr4_same to check the load offset in addition to the name 6. Update svr4_default_sos to also set l_addr_inferior 7. Change the flat solib_list into a per-namespace list using the namespace's r_debug address to identify the namespace. Add gdb.base/dlmopen.exp to test this. To remain backwards compatible with older gdbserver, we reserve the namespace zero for a flat list of solibs from all namespaces. Subsequent patches will extend RSP to allow listing libraries grouped by namespace. This fixes PR 11839. Co-authored-by: Lu, Hongjiu <hongjiu.lu@intel.com>
2022-09-28Renenerate {gdb,gdbserver}/configurePedro Alves1-2/+2
Pick up config/lib-ld.m4 changes from: commit 67d1991b785bdfef1d70cddfa0202b99b43ccce9 Author: Alan Modra <amodra@gmail.com> AuthorDate: Wed Sep 28 13:37:31 2022 +0930 Commit: Alan Modra <amodra@gmail.com> CommitDate: Wed Sep 28 13:37:31 2022 +0930 egrep in binutils Change-Id: Ifc84d30f1fca015e80bafa80f9a35616b0077220
2022-09-24gdbserver: remove unused for loopEnze Li1-3/+0
In this commit, commit cf6c1e710ee162a5adb0ae47acb731f2bfecc956 Date: Mon Jul 11 20:53:48 2022 +0800 gdbserver: remove unused variable I removed an unused variable in handle_v_run. Pedro then pointed out that the for loop after it was also unused. After a period of smoke testing, no exceptions were found. Tested on x86_64-linux.
2022-09-21gdbsupport: move include/gdb/fileio.h contents to fileio.hSimon Marchi2-2/+2
I don't see why include/gdb/fileio.h is placed there. It's not installed by "make install", and it's not included by anything outside of gdb/gdbserver/gdbsupport. Move its content back to gdbsupport/fileio.h. I have omitted the bits inside an `#if 0`, since it's obviously not used, as well as the "limits" constants, which are also unused. Change-Id: I6fbc2ea10fbe4cfcf15f9f76006b31b99c20e5a9
2022-09-13gdbserver/csky add csky gdbserver supportJiangshuai Li3-0/+358
Add new files: gdb/arch/csky.c gdb/arch/csky.h gdb/features/cskyv2-linux.c gdbserver/linux-csky-low.cc 1. In gdb/arch/csky.c file, add function "csky_create_target_description()" for csky_target::low_arch_setup(). later, it can be used for csky native gdb. 2. In gdb/features/cskyv2-linux.c file, create target_tdesc for csky, include gprs, pc, hi, lo, float, vector and float control registers. 3. In gdbserver/linux-csky-low.cc file, using PTRACE_GET/SET_RGESET to get/set registers. The main data structures in asm/ptrace.h are: struct pt_regs { unsigned long tls; unsigned long lr; unsigned long pc; unsigned long sr; unsigned long usp; /* * a0, a1, a2, a3: * r0, r1, r2, r3 */ unsigned long orig_a0; unsigned long a0; unsigned long a1; unsigned long a2; unsigned long a3; /* * r4 ~ r13 */ unsigned long regs[10]; /* r16 ~ r30 */ unsigned long exregs[15]; unsigned long rhi; unsigned long rlo; unsigned long dcsr; }; struct user_fp { unsigned long vr[96]; unsigned long fcr; unsigned long fesr; unsigned long fid; unsigned long reserved; };
2022-08-16Use strwinerror in gdb/windows-nat.cTom Tromey2-70/+0
When working on windows-nat.c, it's useful to see an error message in addition to the error number given by GetLastError. This patch moves strwinerror from gdbserver to gdbsupport, and then updates windows-nat.c to use it. A couple of minor changes to strwinerror (constify the return type and use the ARRAY_SIZE macro) are also included.
2022-08-09gdb/gdbserver: LoongArch: Improve implementation of fcc registersFeiyang Chen1-0/+24
The current implementation of the fcc register is referenced to the user_fp_state structure of the kernel uapi [1]. struct user_fp_state { uint64_t fpr[32]; uint64_t fcc; uint32_t fcsr; }; But it is mistakenly defined as a 64-bit fputype register, resulting in a confusing output of "info register". (gdb) info register ... fcc {f = 0x0, d = 0x0} {f = 0, d = 0} ... According to "Condition Flag Register" in "LoongArch Reference Manual" [2], there are 8 condition flag registers of size 1. Use 8 registers of uint8 to make it easier for users to view the fcc register groups. (gdb) info register ... fcc0 0x1 1 fcc1 0x0 0 fcc2 0x0 0 fcc3 0x0 0 fcc4 0x0 0 fcc5 0x0 0 fcc6 0x0 0 fcc7 0x0 0 ... [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/loongarch/include/uapi/asm/ptrace.h [2] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_condition_flag_register Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
2022-07-13gdbserver: remove unused variableEnze Li1-6/+2
When building with clang 15, I got this error: CXX server.o server.cc:2985:10: error: variable 'new_argc' set but not used [-Werror,-Wunused-but-set-variable] int i, new_argc; ^ Remove the unused variable to eliminate the error. Tested by rebuilding on x86_64-linux with clang 15.
2022-07-12gdbserver: LoongArch: Add floating-point supportTiezhu Yang1-0/+32
This commit adds floating-point support for LoongArch gdbserver. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
2022-07-10gdbserver: LoongArch: Add orig_a0 processingYouling Tang1-0/+2
Commit 736918239b16 ("gdb: LoongArch: add orig_a0 into register set") introduced orig_a0, similar processing needs to be done in gdbserver. At the same time, add orig_a0 related comments. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
2022-07-10gdbserver: LoongArch: Simplify code with register number macrosYouling Tang1-15/+9
Move "enum loongarch_regnum" to gdb/arch/loongarch.h so that the macro definitions can be used in gdbserver/linux-loongarch-low.cc to simplify the code. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
2022-06-29Fix GDBserver regression due to change to avoid reading shell registersPedro Alves1-2/+11
Simon reported that the recent change to make GDB and GDBserver avoid reading shell registers caused a GDBserver regression, caught with ASan while running gdb.server/non-existing-program.exp: $ /home/smarchi/build/binutils-gdb/gdb/testsuite/../../gdb/../gdbserver/gdbserver stdio non-existing-program ================================================================= ==127719==ERROR: AddressSanitizer: heap-use-after-free on address 0x60f0000000e9 at pc 0x55bcbfa301f4 bp 0x7ffd238a7320 sp 0x7ffd238a7310 WRITE of size 1 at 0x60f0000000e9 thread T0 #0 0x55bcbfa301f3 in scoped_restore_tmpl<bool>::~scoped_restore_tmpl() /home/smarchi/src/binutils-gdb/gdbserver/../gdbsupport/scoped_restore.h:86 #1 0x55bcbfa2ffe9 in post_fork_inferior(int, char const*) /home/smarchi/src/binutils-gdb/gdbserver/fork-child.cc:120 #2 0x55bcbf9c9199 in linux_process_target::create_inferior(char const*, std::__debug::vector<char*, std::allocator<char*> > const&) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:991 #3 0x55bcbf954549 in captured_main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3941 #4 0x55bcbf9552f0 in main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4084 #5 0x7ff9d663b0b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x240b2) #6 0x55bcbf8ef2bd in _start (/home/smarchi/build/binutils-gdb/gdbserver/gdbserver+0x1352bd) 0x60f0000000e9 is located 169 bytes inside of 176-byte region [0x60f000000040,0x60f0000000f0) freed by thread T0 here: #0 0x7ff9d6c6f0c7 in operator delete(void*) ../../../../src/libsanitizer/asan/asan_new_delete.cpp:160 #1 0x55bcbf910d00 in remove_process(process_info*) /home/smarchi/src/binutils-gdb/gdbserver/inferiors.cc:164 #2 0x55bcbf9c4ac7 in linux_process_target::remove_linux_process(process_info*) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:454 #3 0x55bcbf9cdaa6 in linux_process_target::mourn(process_info*) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:1599 #4 0x55bcbf988dc4 in target_mourn_inferior(ptid_t) /home/smarchi/src/binutils-gdb/gdbserver/target.cc:205 #5 0x55bcbfa32020 in startup_inferior(process_stratum_target*, int, int, target_waitstatus*, ptid_t*) /home/smarchi/src/binutils-gdb/gdbserver/../gdb/nat/fork-inferior.c:515 #6 0x55bcbfa2fdeb in post_fork_inferior(int, char const*) /home/smarchi/src/binutils-gdb/gdbserver/fork-child.cc:111 #7 0x55bcbf9c9199 in linux_process_target::create_inferior(char const*, std::__debug::vector<char*, std::allocator<char*> > const&) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:991 #8 0x55bcbf954549 in captured_main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3941 #9 0x55bcbf9552f0 in main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4084 #10 0x7ff9d663b0b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x240b2) previously allocated by thread T0 here: #0 0x7ff9d6c6e5a7 in operator new(unsigned long) ../../../../src/libsanitizer/asan/asan_new_delete.cpp:99 #1 0x55bcbf910ad0 in add_process(int, int) /home/smarchi/src/binutils-gdb/gdbserver/inferiors.cc:144 #2 0x55bcbf9c477d in linux_process_target::add_linux_process_no_mem_file(int, int) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:425 #3 0x55bcbf9c8f4c in linux_process_target::create_inferior(char const*, std::__debug::vector<char*, std::allocator<char*> > const&) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:985 #4 0x55bcbf954549 in captured_main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3941 #5 0x55bcbf9552f0 in main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4084 #6 0x7ff9d663b0b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x240b2) Above we see that in the non-existing-program case, the process gets deleted before the starting_up flag gets restored to false. This happens because startup_inferior calls target_mourn_inferior before throwing an error, and in GDBserver, unlike in GDB, mourning deletes the process. Fix this by not using a scoped_restore to manage the starting_up flag, since we should only clear it when startup_inferior doesn't throw. Change-Id: I67325d6f81c64de4e89e20e4ec4556f57eac7f6c
2022-06-28gdb+gdbserver/Linux: avoid reading registers while going through shellPedro Alves3-4/+24
For every stop, Linux GDB and GDBserver save the stopped thread's PC, in lwp->stop_pc. This is done in save_stop_reason, in both gdb/linux-nat.c and gdbserver/linux-low.cc. However, while we're going through the shell after "run", in startup_inferior, we shouldn't be reading registers, as we haven't yet determined the target's architecture -- the shell's architecture may not even be the same as the final inferior's. In gdb/linux-nat.c, lwp->stop_pc is only needed when the thread has stopped for a breakpoint, and since when going through the shell, no breakpoint is going to hit, we could simply teach save_stop_reason to only record the stop pc when the thread stopped for a breakpoint. However, in gdbserver/linux-low.cc, lwp->stop_pc is used in more cases than breakpoint hits (e.g., it's used in tracepoints & the "while-stepping" feature). So to avoid GDB vs GDBserver divergence, we apply the same approach to both implementations. We set a flag in the inferior (process in GDBserver) whenever it is being nursed through the shell, and when that flag is set, save_stop_reason bails out early. While going through the shell, we'll only ever get process exits (normal or signalled), random signals, and exec events, so nothing is lost. Change-Id: If0f01831514d3a74d17efd102875de7d2c6401ad
generated by cgit v1.1 at 2024-11-22 11:43:15 +0000