| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
|
|
With test-case gdb.arch/i386-sse.exp (and likewise gdb.arch/i386-avx.exp) and
host board local-remote-host-notty and target board native-gdbserver I run
into:
...
gdb compile failed, i386-sse.c:68:10: fatal error: \
../lib/precise-aligned-alloc.c: No such file or directory
#include "../lib/precise-aligned-alloc.c"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
Fix this using '#include "precise-aligned-alloc.c"' and making that work with
non-remote and remote host.
Tested on x86_64-linux.
|
|
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
Test-cases gdb.arch/i386-{avx,sse}.exp use assembly instructions that require
the memory operands to be aligned to a certain boundary, and the test-cases
use C11's _Alignas to make that happen.
The draw-back of using _Alignas is that while it does enforce a minimum
alignment, the actual alignment may be bigger, which makes the following
scenario possible:
- copy say, gdb.arch/i386-avx.c as basis for a new test-case
- run the test-case and observe a PASS
- commit the new test-case in the supposition that the test-case is correct
and well-tested
- run later into a failure on a different test setup (which may be a setup
where reproduction and investigation is more difficult and time-consuming),
and find out that the specified alignment was incorrect and should have been
updated to say, 64 bytes. The initial PASS occurred only because the actual
alignment happened to be greater than required.
The idea of having precise alignment as a means of having more predictable
execution which allows flushing out bugs earlier, has been filed as PR
gcc/103095.
Add a new file lib/precise-aligned-alloc.c with functions
precise_aligned_alloc and precise_aligned_dup, to support precise alignment.
Use precise_aligned_dup in aforementioned test-cases to:
- verify that the specified alignment is indeed sufficient, rather
than too little but accidentally over-aligned.
- prevent the same type of problems in any new test-cases based on these
Tested on x86_64-linux, with both gcc and clang.
|
|
When running test-case gdb.arch/i386-avx.exp with clang I ran into:
...
(gdb) PASS: gdb.arch/i386-avx.exp: set first breakpoint in main
continue^M
Continuing.^M
^M
Program received signal SIGSEGV, Segmentation fault.^M
0x000000000040052b in main (argc=1, argv=0x7fffffffd3c8) at i386-avx.c:54^M
54 asm ("vmovaps 0(%0), %%ymm0\n\t"^M
(gdb) FAIL: gdb.arch/i386-avx.exp: continue to breakpoint: \
continue to first breakpoint in main
...
The problem is that the vmovaps insn requires an 256-bit (or 32-byte) aligned
address, and it's only 16-byte aligned:
...
(gdb) p /x $rax
$1 = 0x601030
...
Fix this by using a sufficiently aligned address, using _Alignas.
Compile using -std=gnu11 to support _Alignas.
Likewise in gdb.arch/i386-sse.exp.
Tested on x86_64-linux, with both gcc and clang.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
gdb.arch/i386-sse.exp fails to run with clang, because of:
gdb compile failed, /gdbtest/src/gdb/testsuite/gdb.arch/i386-sse.c:56:40: warning:
passing 'int *' to parameter of type 'unsigned int *' converts between
pointers to integer types with different sign [-Wpointer-sign]
if (!x86_cpuid (1, NULL, NULL, NULL, &edx))
^~~~
/gdbtest/src/gdb/testsuite/../nat/x86-cpuid.h:35:41: note: passing
argument to parameter '__edx' here
unsigned int *__ecx, unsigned int *__edx)
^
1 warning generated.
Fix it by declaring edx unsigned.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-sse.c (have_sse) <edx>: Make unsigned.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
This commit renames nine files that contain code used by both 32- and
64-bit Intel ports such that their names are prefixed with "x86"
rather than "i386". All types, functions and variables within these
files are likewise renamed such that their names are prefixed with
"x86" rather than "i386". This makes GDB follow the convention used
by gdbserver such that 32-bit Intel code lives in files called
"i386-*", 64-bit Intel code lives in files called "amd64-*", and code
for both 32- and 64-bit Intel lives in files called "x86-*".
This commit only renames OS-independent files. The Linux ports of
both GDB and gdbserver now follow the i386/amd64/x86 convention fully.
Some ports still use the old convention where "i386" in file/function/
type/variable names can mean "32-bit only" or "32- and 64-bit" but I
don't want to touch ports I can't fully test except where absolutely
necessary.
gdb/ChangeLog:
* i386-nat.h: Renamed as...
* x86-nat.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-nat.c: Renamed as...
* x86-nat.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* common/i386-xstate.h: Renamed as...
* common/x86-xstate.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-cpuid.h: Renamed as...
* nat/x86-cpuid.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-gcc-cpuid.h: Renamed as...
* nat/x86-gcc-cpuid.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-dregs.h: Renamed as...
* nat/x86-dregs.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-dregs.c: Renamed as...
* nat/x86-dregs.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
gdb/gdbserver/ChangeLog:
* i386-low.h: Renamed as...
* x86-low.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-low.c: Renamed as...
* x86-low.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
|
|
https://sourceware.org/gdb/wiki/Common describes the following
directory structure:
gdb/nat/
Native target backend files. Code that interfaces with the
host debug API. E.g., ptrace code, Windows debug API code,
procfs code should go here.
gdb/target/
Host-independent, target vector specific code (target_ops).
gdb/common/
All other shared code.
This commit moves all native target backend files currently in
gdb/common to gdb/nat.
gdb/
2014-06-20 Gary Benson <gbenson@redhat.com>
* common/gdb_thread_db.h: Moved to nat. All includes updated.
* common/glibc_thread_db.h: Likewise.
* common/i386-cpuid.h: Likewise.
* common/i386-gcc-cpuid.h: Likewise.
* common/linux-btrace.h: Likewise.
* common/linux-osdata.h: Likewise.
* common/linux-procfs.h: Likewise.
* common/linux-ptrace.h: Likewise.
* common/mips-linux-watch.h: Likewise.
* common/linux-btrace.c: Moved to nat.
* common/linux-osdata.c: Likewise.
* common/linux-procfs.c: Likewise.
* common/linux-ptrace.c: Likewise.
* common/mips-linux-watch.c: Likewise.
* nat/gdb_thread_db.h: Moved from common.
* nat/glibc_thread_db.h: Likewise.
* nat/i386-cpuid.h: Likewise.
* nat/i386-gcc-cpuid.h: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-btrace.h: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-osdata.h: Likewise.
* nat/linux-procfs.c: Likewise.
* nat/linux-procfs.h: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/linux-ptrace.h: Likewise.
* nat/mips-linux-watch.c: Likewise.
* nat/mips-linux-watch.h: Likewise.
* Makefile.in (HFILES_NO_SRCDIR): Reflect new locations.
(object file files): Reordered.
* gdb/copyright.py (EXCLUDE_LIST): Reflect new location
of glibc_thread_db.h.
gdb/gdbserver/
2014-06-20 Gary Benson <gbenson@redhat.com>
* Makefile.in (SFILES): Update locations for files moved
from common to nat.
(object file files): Reordered.
gdb/testsuite/
2014-06-20 Gary Benson <gbenson@redhat.com>
* gdb.arch/i386-avx.exp: Fix include file location.
* gdb.arch/i386-sse.exp: Likewise.
|
|
|
|
We've currently got 3 files doing open coded implementations of cpuid.
Each has its own set of workarounds and varying levels of how well
they're written and are generally hardcoded to specific cpuid functions.
If you try to build the latest gdb as a PIE on an i386 system, the build
will fail because one of them lacks PIC workarounds (wrt ebx).
Specifically, we have:
common/linux-btrace.c:
two copies of cpuid asm w/specific args, one has no workarounds
while the other implicitly does to avoid memcpy
go32-nat.c:
two copies of cpuid asm w/specific args, one has workarounds to
avoid memcpy
gdb/testsuite/gdb.arch/i386-cpuid.h:
one general cpuid asm w/many workarounds copied from older gcc
Fortunately, that last header there is pretty damn good -- it handles
lots of edge cases, the code is nice & tight (uses gcc asm operands
rather than manual movs), and is already almost a general library type
header. It's also the basis of what is now the public cpuid.h that is
shipped with gcc-4.3+.
So what I've done is pull that test header out and into gdb/common/
(not sure if there's a better place), synced to the version found in
gcc-4.8.0, put a wrapper API around it, and then cut over all the
existing call points to this new header.
Since the func already has support for "is cpuid supported on this proc",
it makes it trivial to push the i386/x86_64 ifdefs down into this wrapper
API too. Now it can be safely used for all targets and gcc will elide
the unused code for us.
I've verified the gdb.arch testsuite still passes, and this code compiles
for an armv7a host as well as x86_64. The go32-nat code has been left
ifdef-ed out until someone can test & verify the new stuff works (and if
it doesn't, figure out how to make the new code work).
URL: https://bugs.gentoo.org/467806
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
|
|
Automatic update by copyright.sh.
|
|
* gdb.arch/i386-see.c: Ditto.
|
|
* gdb.arch/i386-sse.c (main): Replace call to puts by an nop asm.
|
|
|
|
|
|
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
|
|
|
|
* gdb.arch/i386-cpuid.h: New helper file.
|
