| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
|
|
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
|
|
When reading a core file register section which is larger than
expected, emit a warning. Assume that a register section usually has
exactly the size specified by the regset section iterator. In some
special cases this assumption is wrong, or at least does not match the
regset supply function's logic. Thus also add a way to suppress the
warning in those cases, using a new flag REGSET_VARIABLE_SIZE.
gdb/ChangeLog:
* regset.h (struct regset): Add flags field.
(REGSET_VARIABLE_SIZE): New value for a regset's flags field.
* corelow.c (get_core_register_section): Add warning if the size
exceeds the requested size and the regset does not have the
REGSET_VARIABLE_SIZE flag set.
* alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
flag.
* armbsd-tdep.c (armbsd_gregset): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
* hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
* m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
|
|
downstream Fedora request:
Please make it easier to find the backtrace of the crashing thread
https://bugzilla.redhat.com/show_bug.cgi?id=1024504
Currently after loading a core file GDB prints:
Core was generated by `./threadcrash1'.
Program terminated with signal SIGSEGV, Segmentation fault.
8 *(volatile int *)0=0;
(gdb) _
there is nowhere seen which of the threads had crashed. In reality GDB always
numbers that thread as #1 and it is the current thread that time. But after
dumping all the info into a file for later analysis it is no longer obvious.
'thread apply all bt' even puts the thread #1 to the _end_ of the output!!!
Should GDB always print after loading a core file what "thread" command would
print?
[Current thread is 1 (Thread 0x7fcbe28fe700 (LWP 15453))]
BTW I think it will print the thread even when loading single/non-threaded
core file when other inferior(s) exist. But that currently crashes
[Bug threads/12074] multi-inferior internal error
https://sourceware.org/bugzilla/show_bug.cgi?id=12074
plus I think that would be a correct behavior anyway.
gdb/ChangeLog
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* corelow.c (core_open): Call also thread_command.
* gdbthread.h (thread_command): New prototype moved from ...
* thread.c (thread_command): ... here.
(thread_command): Make it global.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
This patch introduces find_inferior_ptid to replace the common idiom
find_inferior_pid (ptid_get_pid (...));
It replaces all the instances of that idiom that I found with the new
function.
No significant changes before/after the patch in the regression suite
on amd64 linux.
gdb/ChangeLog:
* inferior.c (find_inferior_ptid): New function.
* inferior.h (find_inferior_ptid): New declaration.
* ada-tasks.c (ada_get_task_number): Use find_inferior_ptid.
* corelow.c (core_pid_to_str): Same.
* darwin-nat.c (darwin_resume): Same.
* infrun.c (fetch_inferior_event): Same.
(get_inferior_stop_soon): Same.
(handle_inferior_event): Same.
(handle_signal_stop): Same.
* linux-nat.c (resume_lwp): Same.
(stop_wait_callback): Same.
* mi/mi-interp.c (mi_new_thread): Same.
(mi_thread_exit): Same.
* proc-service.c (ps_pglobal_lookup): Same.
* record-btrace.c (record_btrace_step_thread): Same.
* remote-sim.c (gdbsim_close_inferior): Same.
(gdbsim_resume): Same.
(gdbsim_stop): Same.
* sol2-tdep.c (sol2_core_pid_to_str): Same.
* target.c (memory_xfer_partial_1): Same.
(default_thread_address_space): Same.
* thread.c (thread_change_ptid): Same.
(switch_to_thread): Same.
(do_restore_current_thread_cleanup): Same.
|
|
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:
update_thread_list (void)
{
prune_threads ();
target_find_new_threads ();
update_threads_executing ();
}
And then prune_threads does:
prune_threads (void)
{
struct thread_info *tp, *next;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
delete_thread (tp->ptid);
}
}
Calling thread_live on each thread one by one is expensive.
E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not
a big deal, but still a bunch of syscalls...
With the remote target, it's cumbersome. That thread_alive call ends
up generating one T packet per thread:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.
This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.
Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.
The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that. It's meant to be a no-op.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this. Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this. Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this. Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this. Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this. Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this. Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this. Call prune_threads. Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.
|
|
defs.h includes utils.h, and utils.h includes exceptions.h. All GDB
.c files include defs.h as their first line, so no file other than
utils.h needs to include exceptions.h. This commit removes all such
inclusions.
gdb/ChangeLog:
* ada-lang.c: Do not include exceptions.h.
* ada-valprint.c: Likewise.
* amd64-tdep.c: Likewise.
* auto-load.c: Likewise.
* block.c: Likewise.
* break-catch-throw.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* c-lang.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-script.c: Likewise.
* completer.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* darwin-nat.c: Likewise.
* dwarf2-frame-tailcall.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* event-top.c: Likewise.
* f-valprint.c: Likewise.
* frame-unwind.c: Likewise.
* frame.c: Likewise.
* gdbtypes.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* guile/scm-breakpoint.c: Likewise.
* guile/scm-cmd.c: Likewise.
* guile/scm-frame.c: Likewise.
* guile/scm-lazy-string.c: Likewise.
* guile/scm-param.c: Likewise.
* guile/scm-symbol.c: Likewise.
* guile/scm-type.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* inf-loop.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* interps.h: Likewise.
* jit.c: Likewise.
* linespec.c: Likewise.
* linux-nat.c: Likewise.
* linux-thread-db.c: Likewise.
* m32r-rom.c: Likewise.
* main.c: Likewise.
* memory-map.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* monitor.c: Likewise.
* nto-procfs.c: Likewise.
* objc-lang.c: Likewise.
* p-valprint.c: Likewise.
* parse.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* printcmd.c: Likewise.
* probe.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-breakpoint.c: Likewise.
* python/py-cmd.c: Likewise.
* python/py-finishbreakpoint.c: Likewise.
* python/py-frame.c: Likewise.
* python/py-framefilter.c: Likewise.
* python/py-function.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* python/py-inferior.c: Likewise.
* python/py-infthread.c: Likewise.
* python/py-lazy-string.c: Likewise.
* python/py-linetable.c: Likewise.
* python/py-param.c: Likewise.
* python/py-prettyprint.c: Likewise.
* python/py-symbol.c: Likewise.
* python/py-type.c: Likewise.
* python/py-value.c: Likewise.
* python/python-internal.h: Likewise.
* python/python.c: Likewise.
* record-btrace.c: Likewise.
* record-full.c: Likewise.
* regcache.c: Likewise.
* remote-fileio.c: Likewise.
* remote-mips.c: Likewise.
* remote.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* rs6000-nat.c: Likewise.
* skip.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-ia64-hpux.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib.c: Likewise.
* spu-tdep.c: Likewise.
* stack.c: Likewise.
* stap-probe.c: Likewise.
* symfile-mem.c: Likewise.
* symmisc.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-interp.c: Likewise.
* typeprint.c: Likewise.
* utils.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* windows-nat.c: Likewise.
* xml-support.c: Likewise.
|
|
Now that all instances of the regset_from_core_section gdbarch method
have been replaced by the new iterator method, delete the obsolete
method from the gdbarch interface. Adjust all invocations and
references to it.
gdb/ChangeLog:
* gdbarch.sh (regset_from_core_section): Remove gdbarch method.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* corelow.c (sniff_core_bfd): Drop presence check for deleted
gdbarch method 'regset_from_core_section'.
(get_core_register_section): Remove handling for the case that
regset == NULL and regset_from_core_section is defined.
(get_core_registers): Drop check for deleted method.
* procfs.c (procfs_do_thread_registers): Adjust comment.
|
|
This adds the 'regset' parameter to the iterator callback.
Consequently the 'regset_from_core_section' method is dropped for all
targets that provide the iterator method.
This change prepares for replacing regset_from_core_section
everywhere, thereby eliminating one gdbarch interface. Since the
iterator is usually no more complex than regset_from_core_section
alone, targets that previously didn't define core_regset_sections will
then gain multi-arch capable core file generation support without
increased complexity.
gdb/ChangeLog:
* gdbarch.sh (iterate_over_regset_sections_cb): Add regset
parameter.
* gdbarch.h: Regenerate.
* corelow.c (sniff_core_bfd): Don't sniff if gdbarch has a regset
iterator.
(get_core_register_section): Add parameter 'regset' and use it, if
set. Add parameter 'min_size' and verify the bfd section size
against it.
(get_core_registers_cb): Add parameter 'regset' and pass it to
get_core_register section. For the "standard" register sections
".reg" and ".reg2", set an appropriate default for human_name.
(get_core_registers): Don't abort when the gdbarch has an iterator
but no regset_from_core_section. Add NULL/0 for parameters
'regset'/'min_size' in calls to get_core_register_section.
* linux-tdep.c (linux_collect_regset_section_cb): Add parameter
'regset' and use it instead of calling the
regset_from_core_section gdbarch method.
* i386-tdep.h (struct gdbarch_tdep): Add field 'fpregset'.
* i386-tdep.c (i386_supply_xstateregset)
(i386_collect_xstateregset, i386_xstateregset): Moved to
i386-linux-tdep.c.
(i386_regset_from_core_section): Drop handling for .reg-xfp and
.reg-xstate.
(i386_gdbarch_init): Set tdep field 'fpregset'. Enable generic
core file support only if the regset iterator hasn't been set.
* i386-linux-tdep.c (i386_linux_supply_xstateregset)
(i386_linux_collect_xstateregset, i386_linux_xstateregset): New.
Moved from i386-tdep.c and renamed to *_linux*.
(i386_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation. Allow any .reg-xstate size when reading
from a core file.
* amd64-tdep.c (amd64_supply_xstateregset)
(amd64_collect_xstateregset, amd64_xstateregset): Moved to
amd64-linux-tdep.c.
(amd64_regset_from_core_section): Remove.
(amd64_init_abi): Set new tdep field 'fpregset'. No longer
install an amd64-specific regset_from_core_section gdbarch method.
* amd64-linux-tdep.c (amd64_linux_supply_xstateregset)
(amd64_linux_collect_xstateregset, amd64_linux_xstateregset): New.
Moved from amd64-tdep.c and renamed to *_linux*.
(amd64_linux_iterate_over_regset_sections): Add regset parameter
to each callback invocation. Allow any .reg-xstate size when
reading from a core file.
* arm-linux-tdep.c (arm_linux_regset_from_core_section): Remove.
(arm_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(arm_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* ppc-linux-tdep.c (ppc_linux_regset_from_core_section): Remove.
(ppc_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(ppc_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* s390-linux-tdep.c (struct gdbarch_tdep): Remove the fields
gregset, sizeof_gregset, fpregset, and sizeof_fpregset.
(s390_regset_from_core_section): Remove.
(s390_iterate_over_regset_sections): Add regset parameter to each
callback invocation.
(s390_gdbarch_init): No longer set the regset_from_core_section
gdbarch method. Drop initialization of deleted tdep fields.
|
|
The core_regset_sections list in gdbarch (needed for multi-arch
capable core file generation support) is replaced by an iterator
method. Overall, this reduces the code a bit, and it allows for more
flexibility.
gdb/ChangeLog:
* amd64-linux-tdep.c (amd64_linux_regset_sections): Remove.
(amd64_linux_iterate_over_regset_sections): New.
(amd64_linux_init_abi_common): Don't install the regset section
list, but the new iterator in gdbarch.
* arm-linux-tdep.c (arm_linux_fpa_regset_sections)
(arm_linux_vfp_regset_sections): Remove. Move combined logic...
(arm_linux_iterate_over_regset_sections): ...here. New function.
(arm_linux_init_abi): Set iterator instead of section list.
* corelow.c (get_core_registers_cb): New function, logic moved
from...
(get_core_registers): ...loop body here. Use new iterator method
instead of walking through the regset section list.
* gdbarch.sh: Remove 'core_regset_sections'. New method
'iterate_over_regset_sections'. New typedef
'iterate_over_regset_sections_cb'.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* i386-linux-tdep.c (i386_linux_regset_sections)
(i386_linux_sse_regset_sections, i386_linux_avx_regset_sections):
Remove.
(i386_linux_iterate_over_regset_sections): New.
(i386_linux_init_abi): Don't choose a regset section list, but
install new iterator in gdbarch.
* linux-tdep.c (struct linux_collect_regset_section_cb_data): New.
(linux_collect_regset_section_cb): New function, logic moved
from...
(linux_collect_thread_registers): ...loop body here. Use iterator
method instead of walking through list.
(linux_make_corefile_notes_1): Check for presence of iterator
method instead of regset section list.
* ppc-linux-tdep.c (ppc_linux_vsx_regset_sections)
(ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections)
(ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections)
(ppc64_linux_fp_regset_sections): Remove. Move combined logic...
(ppc_linux_iterate_over_regset_sections): ...here. New function.
(ppc_linux_init_abi): Don't choose from above regset section
lists, but install new iterator in gdbarch.
* regset.h (struct core_regset_section): Remove.
* s390-linux-tdep.c (struct gdbarch_tdep): Add new fields
have_linux_v1, have_linux_v2, and have_tdb.
(s390_linux32_regset_sections, s390_linux32v1_regset_sections)
(s390_linux32v2_regset_sections, s390_linux64_regset_sections)
(s390_linux64v1_regset_sections, s390_linux64v2_regset_sections)
(s390x_linux64_regset_sections, s390x_linux64v1_regset_sections)
(s390x_linux64v2_regset_sections): Remove. Move combined logic...
(s390_iterate_over_regset_sections): ...here. New function. Use
new tdep fields.
(s390_gdbarch_init): Set new tdep fields. Don't choose from above
regset section lists, but install new iterator.
|
|
I run splint in gdb source and get the following warnings:
../../../git/gdb/corelow.c:740: Return value type int does not match declared type enum target_xfer_status: 0
'TARGET_XFER_EOF' (enum target_xfer_status) is expected to be returned,
but 0 is returned. This patch is to replace 0 with TARGET_XFER_EOF
in the implementations of to_xfer_partial.
gdb:
2014-08-07 Yao Qi <yao@codesourcery.com>
* corelow.c (core_xfer_partial): Replace 0 with TARGET_XFER_EOF.
* remote-m32r-sdi.c (m32r_xfer_memory): Likewise.
* remote.c (remote_read_bytes): Likewise.
|
|
This commit moves the inclusion of errno.h to common-defs.h and
removes all other inclusions. Note that prior to this commit
server.h included errno.h protected by "#ifdef HAVE_ERRNO_H".
This protection was added with the Windows CE port, which is
currently broken. Since no other platform needs this, I have
removed the protection and the configury to support it.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include errno.h.
* defs.h: Do not include errno.h.
* ada-typeprint.c: Likewise.
* c-typeprint.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* event-loop.c: Likewise.
* f-typeprint.c: Likewise.
* gnu-nat.c: Likewise.
* go32-nat.c: Likewise.
* i386gnu-nat.c: Likewise.
* m2-typeprint.c: Likewise.
* nat/linux-btrace.c: Likewise.
* p-typeprint.c: Likewise.
* procfs.c: Likewise.
* remote-sim.c: Likewise.
* rs6000-nat.c: Likewise.
* target.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* configure.ac (AC_CHECK_HEADERS): Remove errno.h.
* configure: Regenerate.
* config.in: Likewise.
* server.h: Do not include errno.h.
* event-loop.c: Likewise.
* hostio-errno.c: Likewise.
* linux-low.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
* gdbreplay.c: Unconditionally include errno.h.
|
|
This commit includes string.h in common-defs.h and removes all other
inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include string.h.
* aarch64-tdep.c: Do not include string.h.
* ada-exp.y: Likewise.
* ada-lang.c: Likewise.
* ada-lex.l: Likewise.
* ada-typeprint.c: Likewise.
* ada-valprint.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alpha-nat.c: Likewise.
* alpha-osf1-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-dicos-tdep.c: Likewise.
* amd64-linux-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-sol2-tdep.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-linux-nat.c: Likewise.
* arm-linux-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* arm-wince-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* armnbsd-nat.c: Likewise.
* armnbsd-tdep.c: Likewise.
* armobsd-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* ax-gdb.c: Likewise.
* ax-general.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* breakpoint.c: Likewise.
* build-id.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* c-typeprint.c: Likewise.
* c-valprint.c: Likewise.
* charset.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-setshow.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/agent.c: Likewise.
* common/buffer.c: Likewise.
* common/buffer.h: Likewise.
* common/common-utils.c: Likewise.
* common/filestuff.c: Likewise.
* common/filestuff.c: Likewise.
* common/format.c: Likewise.
* common/print-utils.c: Likewise.
* common/rsp-low.c: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* common/xml-utils.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* cris-tdep.c: Likewise.
* d-exp.y: Likewise.
* darwin-nat.c: Likewise.
* dbxread.c: Likewise.
* dcache.c: Likewise.
* demangle.c: Likewise.
* dicos-tdep.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* elfread.c: Likewise.
* environ.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* exec.c: Likewise.
* expprint.c: Likewise.
* f-exp.y: Likewise.
* f-lang.c: Likewise.
* f-typeprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findcmd.c: Likewise.
* findvar.c: Likewise.
* fork-child.c: Likewise.
* frame.c: Likewise.
* frv-linux-tdep.c: Likewise.
* frv-tdep.c: Likewise.
* gdb.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-exp.y: Likewise.
* go-lang.c: Likewise.
* go32-nat.c: Likewise.
* guile/guile.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* hppa-linux-nat.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-cygwin-tdep.c: Likewise.
* i386-dicos-tdep.c: Likewise.
* i386-linux-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-sol2-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-linux-nat.c: Likewise.
* inf-child.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* inflow.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* iq2000-tdep.c: Likewise.
* irix5-nat.c: Likewise.
* jv-exp.y: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* jv-valprint.c: Likewise.
* language.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* lm32-tdep.c: Likewise.
* m2-exp.y: Likewise.
* m2-typeprint.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-linux-tdep.c: Likewise.
* m32r-rom.c: Likewise.
* m32r-tdep.c: Likewise.
* m68hc11-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m68klinux-nat.c: Likewise.
* m68klinux-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macrocmd.c: Likewise.
* main.c: Likewise.
* mdebugread.c: Likewise.
* mem-break.c: Likewise.
* memattr.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-disas.c: Likewise.
* mi/mi-cmd-env.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-cmd-var.c: Likewise.
* mi/mi-cmds.c: Likewise.
* mi/mi-console.c: Likewise.
* mi/mi-getopt.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.c: Likewise.
* microblaze-rom.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* minidebug.c: Likewise.
* minsyms.c: Likewise.
* mips-irix-tdep.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mipsread.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* monitor.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-procfs.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/linux-waitpid.c: Likewise.
* nbsd-tdep.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* nto-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* osdata.c: Likewise.
* p-exp.y: Likewise.
* p-lang.c: Likewise.
* p-typeprint.c: Likewise.
* parse.c: Likewise.
* posix-hdep.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* ravenscar-thread.c: Likewise.
* regcache.c: Likewise.
* registry.c: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote-mips.c: Likewise.
* remote-notif.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* reverse.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-go32.c: Likewise.
* ser-mingw.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* serial.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* shnbsd-tdep.c: Likewise.
* skip.c: Likewise.
* sol-thread.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-osf.c: Likewise.
* solib-som.c: Likewise.
* solib-spu.c: Likewise.
* solib-target.c: Likewise.
* solib.c: Likewise.
* somread.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* spu-linux-nat.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* std-regs.c: Likewise.
* symfile.c: Likewise.
* symmisc.c: Likewise.
* symtab.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-command.c: Likewise.
* tui/tui-data.c: Likewise.
* tui/tui-disasm.c: Likewise.
* tui/tui-file.c: Likewise.
* tui/tui-layout.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-regs.c: Likewise.
* tui/tui-source.c: Likewise.
* tui/tui-stack.c: Likewise.
* tui/tui-win.c: Likewise.
* tui/tui-windata.c: Likewise.
* tui/tui-winsource.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-tdep.c: Likewise.
* vaxnbsd-tdep.c: Likewise.
* vaxobsd-tdep.c: Likewise.
* windows-nat.c: Likewise.
* xcoffread.c: Likewise.
* xml-support.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include string.h.
* event-loop.c: Likewise.
* linux-low.c: Likewise.
* regcache.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
|
|
This commit includes gdb_assert.h in common-defs.h and removes all
other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb_assert.h.
* aarch64-tdep.c: Do not include gdb_assert.h.
* addrmap.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64bsd-nat.c: Likewise.
* amd64fbsd-nat.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64nbsd-nat.c: Likewise.
* amd64nbsd-tdep.c: Likewise.
* amd64obsd-nat.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* auxv.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* blockframe.c: Likewise.
* breakpoint.c: Likewise.
* bsd-kvm.c: Likewise.
* bsd-uthread.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* charset.c: Likewise.
* cleanups.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/common-utils.c: Likewise.
* common/queue.h: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* complaints.c: Likewise.
* completer.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-namespace.c: Likewise.
* cp-support.c: Likewise.
* cris-tdep.c: Likewise.
* dbxread.c: Likewise.
* dictionary.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame-tailcall.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2expr.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* expprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findvar.c: Likewise.
* frame-unwind.c: Likewise.
* frame.c: Likewise.
* frv-tdep.c: Likewise.
* gcore.c: Likewise.
* gdb-dlfcn.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-lang.c: Likewise.
* guile/scm-exception.c: Likewise.
* guile/scm-gsmob.c: Likewise.
* guile/scm-lazy-string.c: Likewise.
* guile/scm-math.c: Likewise.
* guile/scm-pretty-print.c: Likewise.
* guile/scm-safe-call.c: Likewise.
* guile/scm-utils.c: Likewise.
* guile/scm-value.c: Likewise.
* h8300-tdep.c: Likewise.
* hppa-hpux-nat.c: Likewise.
* hppa-tdep.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-darwin-nat.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-nat.c: Likewise.
* i386fbsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-tdep.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* inline-frame.c: Likewise.
* interps.c: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* linux-thread-db.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-nat.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macroexp.c: Likewise.
* macrotab.c: Likewise.
* maint.c: Likewise.
* mdebugread.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-common.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* mips-linux-nat.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/mips-linux-watch.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* obsd-nat.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* parse.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-nat.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-nat.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-nat.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* psymtab.c: Likewise.
* python/py-lazy-string.c: Likewise.
* python/py-value.c: Likewise.
* regcache.c: Likewise.
* reggroups.c: Likewise.
* registry.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-tdep.c: Likewise.
* score-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-mingw.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* solib-darwin.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-sol2-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparc64obsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* sparcobsd-tdep.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-linux-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tramp-frame.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-winsource.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valops.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-nat.c: Likewise.
* xml-syscall.c: Likewise.
* xml-tdesc.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
* xtensa-tdep.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb_assert.h.
|
|
This makes target_ops::to_open take a const string and then fixes the
fallout.
There were a few of these I could not build. However I eyeballed it
and in any case the fixes should generally be trivial.
This is based on the patch to fix up the target debugging for to_open,
because that changes gdb to not directly install to_open as the target
command
2014-07-30 Tom Tromey <tromey@redhat.com>
* bsd-kvm.c (bsd_kvm_open): Constify.
* corelow.c (core_open): Constify.
* ctf.c (ctf_open): Constify.
* dbug-rom.c (dbug_open): Constify.
* exec.c (exec_open): Constify.
* m32r-rom.c (m32r_open, mon2000_open): Constify.
* microblaze-rom.c (picobug_open): Constify.
* nto-procfs.c (procfs_open_1, procfs_open, procfs_native_open):
Constify.
* ppcbug-rom.c (ppcbug_open0, ppcbug_open1): Constify.
* record-btrace.c (record_btrace_open): Constify.
* record-full.c (record_full_core_open_1, record_full_open_1)
(record_full_open): Constify.
* remote-m32r-sdi.c (m32r_open): Constify.
* remote-mips.c (common_open, mips_open, pmon_open, ddb_open)
(rockhopper_open, lsi_open): Constify.
* remote-sim.c (gdbsim_open): Constify.
* remote.c (remote_open, extended_remote_open, remote_open_1):
Constify.
* target.h (struct target_ops) <to_open>: Make "arg" const.
* tracefile-tfile.c (tfile_open): Constify.
|
|
This patch cleans up some minor inconsistencies in target delegation.
It's primary purpose is to avoid confusion in the code. A few spots
were checking the "beneath" target; however this can only be NULL for
the dummy target, so such tests are not needed. Some other spots were
iterating over the beneath targets, looking for a method
implementation. This is not needed for methods handled by
make-target-delegates, as there is always an implementation.
2014-07-18 Tom Tromey <tromey@redhat.com>
PR gdb/17130:
* spu-multiarch.c (spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Simplify delegation.
* linux-thread-db.c (thread_db_pid_to_str): Always delegate.
* windows-nat.c (windows_xfer_partial): Always delegate.
* record-btrace.c (record_btrace_xfer_partial): Simplify
delegation.
(record_btrace_fetch_registers, record_btrace_store_registers)
(record_btrace_prepare_to_store, record_btrace_resume)
(record_btrace_wait, record_btrace_find_new_threads)
(record_btrace_thread_alive): Likewise.
* procfs.c (procfs_xfer_partial): Always delegate.
* corelow.c (core_xfer_partial): Always delegate.
* sol-thread.c (sol_find_new_threads): Simplify delegation.
|
|
This makes a parameter of to_info_proc const and then fixes up some
fallout, including parameters in a couple of gdbarch methods.
I could not test the procfs.c change. I verified it by inspection.
If this causes an error here, it will be trivial to fix.
2014-06-16 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_info_proc>: Make parameter
const.
(target_info_proc): Update.
* target.c (target_info_proc): Make "args" const.
* procfs.c (procfs_info_proc): Update.
* linux-tdep.c (linux_info_proc): Update.
(linux_core_info_proc_mappings): Make "args" const.
(linux_core_info_proc): Update.
* gdbarch.sh (info_proc, core_info_proc): Make "args" const.
* gdbarch.c: Rebuild.
* gdbarch.h: Rebuild.
* corelow.c (core_info_proc): Update.
|
|
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
|
|
A patch in the target cleanup series caused a regression when using
record with target-async. Version 4 of the patch is here:
https://sourceware.org/ml/gdb-patches/2014-03/msg00159.html
The immediate problem is that record supplies to_can_async_p and
to_is_async_p methods, but does not supply a to_async method. So,
when target-async is set, record claims to support async -- but if the
underlying target does not support async, then the to_async method
call will end up in that method's default implementation, namely
tcomplain.
This worked previously because the record target used to provide a
to_async method; one that (erroneously, only at push time) checked the
other members of the target stack, and then simply dropped to_async
calls in the "does not implement async" case.
My first thought was to simply drop tcomplain as the default for
to_async. This works, but Pedro pointed out that the only reason
record has to supply to_can_async_p and to_is_async_p is that these
default to using the find_default_run_target machinery -- and these
defaults are only needed by "run" and "attach".
So, a nicer solution presents itself: change run and attach to
explicitly call into the default run target when needed; and change
to_is_async_p and to_can_async_p to default to "return 0". This makes
the target stack simpler to use and lets us remove the method
implementations from record. This is also in harmony with other plans
for the target stack; namely trying to reduce the impact of
find_default_run_target. This approach makes it clear that
find_default_is_async_p is not needed -- it is asking whether a target
that may not even be pushed is actually async, which seems like a
nonsensical question.
While an improvement, this approach proved to introduce the same bug
when using the core target. Looking a bit deeper, the issue is that
code in "attach" and "run" may need to use either the current target
stack or the default run target -- but different calls into the target
API in those functions could wind up querying different targets.
This new patch makes the target to use more explicit in "run" and
"attach". Then these commands explicitly make the needed calls
against that target. This ensures that a single target is used for
all relevant operations. This lets us remove a couple find_default_*
functions from various targets, including the dummy target. I think
this is a decent understandability improvement.
One issue I see with this patch is that the new calls in "run" and
"attach" are not very much like the rest of the target API. I think
fundamentally this is due to bad factoring in the target API, which
may need to be fixed for multi-target. Tackling that seemed ambitious
for a regression fix.
While working on this I noticed that there don't seem to be any test
cases that involve both target-async and record, so this patch changes
break-precsave.exp to add some. It also changes corefile.exp to add
some target-async tests; these pass with current trunk and with this
patch applied, but fail with the v1 patch.
This patch differs from v4 in that it moves initialization of
to_can_async_p and to_supports_non_stop into inf-child, adds some
assertions to complete_target_initialization, and adds some comments
to target.h.
Built and regtested on x86-64 Fedora 20.
2014-03-12 Tom Tromey <tromey@redhat.com>
* inf-child.c (return_zero): New function.
(inf_child_target): Set to_can_async_p, to_supports_non_stop.
* aix-thread.c (aix_thread_inferior_created): New function.
(aix_thread_attach): Remove.
(init_aix_thread_ops): Don't set to_attach.
(_initialize_aix_thread): Register inferior_created observer.
* corelow.c (init_core_ops): Don't set to_attach or
to_create_inferior.
* exec.c (init_exec_ops): Don't set to_attach or
to_create_inferior.
* infcmd.c (run_command_1): Use find_run_target. Make direct
target calls.
(attach_command): Use find_attach_target. Make direct target
calls.
* record-btrace.c (init_record_btrace_ops): Don't set
to_create_inferior.
* record-full.c (record_full_can_async_p, record_full_is_async_p):
Remove.
(init_record_full_ops, init_record_full_core_ops): Update. Don't
set to_create_inferior.
* target.c (complete_target_initialization): Add assertion.
(target_create_inferior): Remove.
(find_default_attach, find_default_create_inferior): Remove.
(find_attach_target, find_run_target): New functions.
(find_default_is_async_p, find_default_can_async_p)
(target_supports_non_stop, target_attach): Remove.
(init_dummy_target): Don't set to_create_inferior or
to_supports_non_stop.
* target.h (struct target_ops) <to_attach>: Add comment. Remove
TARGET_DEFAULT_FUNC.
<to_create_inferior>: Add comment.
<to_can_async_p, to_is_async_p, to_supports_non_stop>: Use
TARGET_DEFAULT_RETURN.
<to_can_async_p, to_supports_non_stop, to_can_run>: Add comments.
(find_attach_target, find_run_target): Declare.
(target_create_inferior): Remove.
(target_has_execution_1): Update comment.
(target_supports_non_stop): Remove.
* target-delegates.c: Rebuild.
2014-03-12 Tom Tromey <tromey@redhat.com>
* gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
New procs. Add target-async tests.
* gdb.reverse/break-precsave.exp (precsave_tests): New proc.
Add target-async tests.
|
|
This switches to_read_description to the "new normal" delegation
scheme. This one was a bit trickier than the other changes due to the
way that target_read_description handled delegation. I examined all
the target implementations of to_read_description and changed the ones
returning NULL to instead delegate.
2014-02-19 Tom Tromey <tromey@redhat.com>
* arm-linux-nat.c (arm_linux_read_description): Delegate when
needed.
* corelow.c (core_read_description): Delegate when needed.
* remote.c (remote_read_description): Delegate when needed.
* target-delegates.c: Rebuild.
* target.c (target_read_description): Rewrite.
* target.h (struct target_ops) <to_read_description>: Update
comment. Use TARGET_DEFAULT_RETURN.
|
|
2014-02-19 Tom Tromey <tromey@redhat.com>
* windows-nat.c (windows_close): Add 'self' argument.
* tracepoint.c (tfile_close): Add 'self' argument.
* target.h (struct target_ops) <to_close>: Add argument.
* target.c (target_close): Add argument.
(update_current_target): Update.
* remote.c (remote_close): Add 'self' argument.
* remote-sim.c (gdbsim_close): Add 'self' argument.
* remote-mips.c (mips_close): Add 'self' argument.
* remote-m32r-sdi.c (m32r_close): Add 'self' argument.
* record-full.c (record_full_close): Add 'self' argument.
* record-btrace.c (record_btrace_close): Add 'self' argument.
* monitor.h (monitor_close): Add 'self' argument.
* monitor.c (monitor_close): Add 'self' argument.
* mips-linux-nat.c (mips_linux_close): Add 'self' argument.
* linux-nat.c (linux_nat_close): Add argument.
* go32-nat.c (go32_close): Add 'self' argument.
* exec.c (exec_close_1): Add 'self' argument.
* ctf.c (ctf_close): Add 'self' argument.
* corelow.c (core_close): Add 'self' argument.
(core_close_cleanup): Update.
* bsd-uthread.c (bsd_uthread_close): Add 'self' argument.
* bsd-kvm.c (bsd_kvm_close): Add 'self' argument.
|
|
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
|
|
Hi,
This patch replaces -1 with TARGET_XFER_E_IO in the implementations of
to_xfer_partial and their callees. This change is quite mechanical,
and makes the next patch shorter.
gdb:
2014-02-07 Yao Qi <yao@codesourcery.com>
* auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
(ld_so_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise.
(darwin_xfer_partial): Likewise.
* exec.c (exec_xfer_partial): Likewise.
* gnu-nat.c (gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo): Likewise.
(linux_proc_xfer_spu): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_qxfer): Likewise.
(remote_write_qxfer, remote_read_qxfer): Likewise.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
(spu_xfer_partial): Likewise.
* target.c (memory_xfer_partial_1): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
|
|
Functions remote_read_bytes and get_core_siginfo are the callees of
target to_xfer_partial interface, so argument 'len' should be changed
to type ULONGEST.
gdb:
2014-01-24 Yao Qi <yao@codesourcery.com>
* remote.c (remote_read_bytes): Change type of len to ULONGEST.
* corelow.c (get_core_siginfo): Likewise.
|
|
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* target.h (target_ops) <to_insert_breakpoint>
<to_remove_breakpoint>: Add target_ops parameter.
(forward_target_insert_breakpoint): New.
(forward_target_remove_breakpoint): New.
(memory_remove_breakpoint, memory_insert_breakpoint):
Add target_ops parameter.
* target.c (target_insert_breakpoint): Split into this and ...
(forward_target_insert_breakpoint): ... this.
(target_remove_breakpoint): Split into this and ...
(forward_target_remove_breakpoint): ... this.
(debug_to_insert_breakpoint): Add target_ops parameter.
Call forward_target_insert_breakpoint.
(debug_to_remove_breakpoint): Add target_ops parameter.
Call forward_target_remove_breakpoint.
(update_current_target): Do not inherit or default to_insert_breakpoint
and to_remove_breakpoint.
* corelow.c (ignore): Add target_ops parameter.
* exec.c (ignore): Add target_ops parameter.
* mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
Add target_ops parameter.
* monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
Add target_ops parameter.
* nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
Add target_ops parameter.
* record-full.c (record_full_beneath_to_insert_breakpoint)
(record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
(tmp_to_remove_breakpoint, record_full_insert_breakpoint)
(record_full_remove_breakpoint, record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint): Add target_ops parameter.
Update users.
(record_full_beneath_to_insert_breakpoint_ops)
(record_full_beneath_to_remove_breakpoint_ops)
(tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
(record_full_open): Initialize tmp_to_insert_breakpoint_ops,
tmp_to_remove_breakpoint_ops,
record_full_beneath_to_insert_breakpoint_ops, and
record_full_beneath_to_remove_breakpoint_ops.
* remote-m32r-sdi.c (m32r_insert_breakpoint)
(m32r_remove_breakpoint): Add target_ops parameter.
* remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
Add target_ops parameter.
* remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
Add target_ops parameter.
|
|
This patch changes to_xfer_partial's len's type to ULONGEST, and
adjust its implementations.
gdb:
2014-01-14 Yao Qi <yao@codesourcery.com>
* target.h (target_xfer_partial_ftype): Update.
(struct target_ops) <to_xfer_partial>: Change 'len' type to
ULONGEST.
* aix-thread.c (aix_thread_xfer_partial): Change type of
argument 'len' to ULONGEST.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv): Likewise.
(memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_write_inferior): Likewise. Use
'%u'.
(darwin_read_dyld_info): Likewise.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
instead of plongest.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
(ia64_hpux_xfer_partial): Likewise.
* ia64-linux-nat.c (ia64_linux_xfer_partial):
* inf-ptrace.c (inf_ptrace_xfer_partial):
* inf-ttrace.c (inf_ttrace_xfer_partial):
* linux-nat.c (linux_xfer_siginfo): Likewise.
(linux_nat_xfer_partial): Likewise.
(spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
(linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
instead of plongest.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_xfer_partial): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
* rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
declaration.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* target.c (target_read_live_memory): Likewise.
(memory_xfer_live_readonly_partial): Likewise.
(memory_xfer_partial, memory_xfer_partial_1): Likewise.
(target_xfer_partial, default_xfer_partial): Likewise.
(current_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise. Call
pulongest instead of plongest.
(windows_xfer_partial): Likewise.
(windows_xfer_shared_libraries): Likewise.
|
|
This replaces XZALLOC with XCNEW and removes XZALLOC.
This change is purely mechanical.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XZALLOC): Remove.
* ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
* ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
(get_ada_tasks_inferior_data): Likewise.
* auto-load.c (get_auto_load_pspace_data): Likewise.
* auxv.c (get_auxv_inferior_data): Likewise.
* bfd-target.c (target_bfd_reopen): Likewise.
* breakpoint.c (get_catch_syscall_inferior_data): Likewise.
(deprecated_insert_raw_breakpoint): Likewise.
* bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
* corelow.c (core_open): Likewise.
* darwin-nat.c (darwin_check_new_threads): Likewise.
(darwin_attach_pid): Likewise.
* dummy-frame.c (dummy_frame_push): Likewise.
* dwarf2-frame.c (dwarf2_frame_cache): Likewise.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
* eval.c (ptrmath_type_p): Likewise.
* exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
* gdbtypes.c (alloc_type_arch): Likewise.
(alloc_type_instance): Likewise.
* hppa-tdep.c (hppa_gdbarch_init): Likewise.
* inf-child.c (inf_child_can_use_agent): Likewise.
* inflow.c (get_inflow_inferior_data): Likewise.
* infrun.c (save_infcall_suspend_state): Likewise.
* jit.c (jit_reader_load): Likewise.
(get_jit_objfile_data): Likewise.
(get_jit_program_space_data): Likewise.
(jit_object_open_impl): Likewise.
(jit_symtab_open_impl): Likewise.
(jit_block_open_impl): Likewise.
(jit_frame_sniffer): Likewise.
* linux-fork.c (add_fork): Likewise.
* maint.c (make_command_stats_cleanup): Likewise.
* objfiles.c (get_objfile_pspace_data): Likewise.
* opencl-lang.c (struct lval_closure): Likewise.
* osdata.c (osdata_start_osdata): Likewise.
* progspace.c (new_address_space): Likewise.
(add_program_space): Likewise.
* remote-sim.c (get_sim_inferior_data): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* skip.c (Ignore): Likewise.
(skip_delete_command): Likewise.
* solib-aix.c (get_solib_aix_inferior_data): Likewise.
(library_list_start_library): Likewise.
(solib_aix_current_sos): Likewise.
* solib-darwin.c (get_darwin_info): Likewise.
(darwin_current_sos): Likewise.
* solib-dsbt.c (get_dsbt_info): Likewise.
* solib-ia64-hpux.c (new_so_list): Likewise.
(ia64_hpux_get_solib_linkage_addr): Likewise.
* solib-spu.c (append_ocl_sos): Likewise.
(spu_current_sos): Likewise.
* solib-svr4.c (get_svr4_info): Likewise.
(svr4_keep_data_in_core): Likewise.
(library_list_start_library): Likewise.
(svr4_default_sos): Likewise.
(svr4_read_so_list): Likewise.
* solib-target.c (library_list_start_library): Likewise.
(solib_target_current_sos): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* symfile-debug.c (install_symfile_debug_logging): Likewise.
* symfile.c (default_symfile_segments): Likewise.
* target-descriptions.c (tdesc_data_init): Likewise.
(tdesc_create_reg): Likewise.
(struct tdesc_type *): Likewise.
(tdesc_create_vector): Likewise.
(tdesc_set_struct_size): Likewise.
(struct tdesc_type *): Likewise.
(tdesc_free_feature): Likewise.
(tdesc_create_feature): Likewise.
* windows-nat.c (windows_add_thread): Likewise.
(windows_make_so): Likewise.
* xml-support.c (gdb_xml_body_text): Likewise.
(gdb_xml_create_parser_and_cleanup): Likewise.
(xml_process_xincludes): Likewise.
* xml-syscall.c (allocate_syscalls_info): Likewise.
(syscall_create_syscall_desc): Likewise.
|
|
|
|
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
|
|
will hold the signal number when the inferior terminates due to the
uncaught signal.
I've made modifications on infrun.c:handle_inferior_event such that
$_exitcode gets cleared when the inferior signalled, and vice-versa.
This assumption was made because the variables are mutually
exclusive, i.e., when the inferior terminates because of an uncaught
signal it is not possible for it to return. I have also made modifications
such that when a corefile is loaded, $_exitsignal gets set to the uncaught
signal that "killed" the inferior, and $_exitcode is cleared.
The patch also adds a NEWS entry, documentation bits, and a testcase. The
documentation entry explains how to use $_exitsignal and $_exitcode in a
GDB script, by making use of the new $_isvoid convenience function.
gdb/
2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS: Mention new convenience variable $_exitsignal.
* corelow.c (core_open): Reset exit convenience variables. Set
$_exitsignal to the uncaught signal which generated the corefile.
* infrun.c (handle_inferior_event): Reset exit convenience
variables. Set $_exitsignal for TARGET_WAITKIND_SIGNALLED.
(clear_exit_convenience_vars): New function.
* inferior.h (clear_exit_convenience_vars): New prototype.
gdb/testsuite/
2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/corefile.exp: Test whether $_exitsignal is set and
$_exitcode is void when opening a corefile.
* gdb.base/exitsignal.exp: New file.
* gdb.base/segv.c: Likewise.
* gdb.base/normal.c: Likewise.
gdb/doc/
2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Convenience Variables): Document $_exitsignal.
Update entry for $_exitcode.
|
|
"break", "list")
"info threads" changes the default source for "break" and "list", to
whatever the location of the first/bottom thread in the thread list
is...
(gdb) b start
(gdb) c
...
(gdb) list
*lists "start"*
(gdb) b 23
Breakpoint 3 at 0x400614: file test.c, line 23.
(gdb) info threads
Id Target Id Frame
* 2 Thread 0x7ffff7fcb700 (LWP 1760) "test" start (arg=0x0) at test.c:23
1 Thread 0x7ffff7fcc740 (LWP 1748) "test" 0x000000323dc08e60 in pthread_join (threadid=140737353922304, thread_return=0x0) at pthread_join.c:93
(gdb) b 23
Breakpoint 4 at 0x323dc08d90: file pthread_join.c, line 23.
^^^^^^^^^^^^^^^
(gdb) list
93 lll_wait_tid (pd->tid);
94
95
96 /* Restore cancellation mode. */
97 CANCEL_RESET (oldtype);
98
99 /* Remove the handler. */
100 pthread_cleanup_pop (0);
101
102
The issue is that print_stack_frame always sets the current sal to the
frame's sal. print_frame_info (which print_stack_frame calls to do
most of the work) also sets the last displayed sal, but only if
print_what isn't LOCATION. Now the call in question, from within
thread.c:print_thread_info, does pass in LOCATION as print_what, but
print_stack_frame doesn't have the same check print_frame_info has.
We could consider adding it, but setting these globals depending on
print_what isn't very clean, IMO. What we have is two logically
distinct operations mixed in the same function(s):
#1 - print frame, in the format specified by {print_what,
print_level and print_args}.
#2 - We're displaying a frame to the user, and I want the default
sal to point here, because the program stopped here, or the user
did some context-changing command (up, down, etc.).
So I added a new parameter to print_stack_frame & friends for point
#2, and went through all calls in the tree adjusting as necessary.
Tested on x86_64 Fedora 17.
gdb/
2013-09-17 Pedro Alves <palves@redhat.com>
PR gdb/15911
* ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
* bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
* corelow.c (core_open):
* frame.h (print_stack_frame, print_frame_info): New
'set_current_sal' parameter.
* infcmd.c (finish_command, kill_command): Adjust call to
print_stack_frame.
* inferior.c (inferior_command): Likewise.
* infrun.c (normal_stop): Likewise.
* linux-fork.c (linux_fork_context): Likewise.
* record-full.c (record_full_goto_entry, record_full_restore):
Likewise.
* remote-mips.c (common_open): Likewise.
* stack.c (print_stack_frame): New 'set_current_sal' parameter.
Use it.
(print_frame_info): New 'set_current_sal' parameter. Set the last
displayed sal depending on the new paremeter instead of looking at
print_what.
(backtrace_command_1, select_and_print_frame, frame_command)
(current_frame_command, up_command, down_command): Adjust call to
print_stack_frame.
* thread.c (print_thread_info, restore_selected_frame)
(do_captured_thread_select): Adjust call to print_stack_frame.
* tracepoint.c (tfind_1): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
(mi_cmd_stack_info_frame): Likewise.
* mi/mi-interp.c (mi_on_normal_stop): Likewise.
* mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.
gdb/testsuite/
* gdb.threads/info-threads-cur-sal-2.c: New file.
* gdb.threads/info-threads-cur-sal.c: New file.
* gdb.threads/info-threads-cur-sal.exp: New file.
|
|
|
|
signal number.
|
|
The current code attempts to provide relocation support when debugging
core files via the rs6000_xfer_partial method of the rs6000-nat
target_ops vector. However, this target_ops vector does not get pushed
on the target stack at all when debugging core files, thus bypassing
completely that part of the code.
This patch fixes the problem by extending corelow's core_xfer_partial
into handling the TARGET_OBJECT_LIBRARIES_AIX object.
gdb/ChangeLog:
* gdbarch.sh (core_xfer_shared_libraries_aix): New method.
* gdbarch.h, gdbarch.c: Regenerate.
* corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX
handling.
* rs6000-aix-tdep.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h.
* rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and
"xml-utils.h".
(struct field_info, struct ld_info_desc): New types.
(ld_info32_desc, ld_info64_desc): New static constants.
(struct ld_info): New type.
(rs6000_aix_extract_ld_info): New function.
(rs6000_aix_shared_library_to_xml): Likewise.
(rs6000_aix_ld_info_to_xml): Likewise.
(rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
(rs6000_aix_init_osabi): Add call to
set_gdbarch_core_xfer_shared_libraries_aix.
* rs6000-nat.c: Add "rs6000-aix-tdep.h" include.
Remove "xml-utils.h" include.
(LdInfo): Delete typedef.
(ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME):
Delete macros.
(rs6000_ptrace_ldinfo): Change return type to gdb_byte *.
Adjust code accordingly.
(rs6000_core_ldinfo): Delete, folded into
rs6000_aix_core_xfer_shared_libraries_aix.
(rs6000_xfer_shared_library): Delete.
(rs6000_xfer_shared_libraries): Reimplement.
|
|
... using the target_so_ops framework.
gdb/ChangeLog:
* target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
* features/library-list-aix.dtd: New file.
* solib-aix.h, solib-aix.c: New file.
* rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
(rs6000_find_toc_address_hook): Delete.
(rs6000_push_dummy_call): Rewrite code setting the TOC value.
(rs6000_aix_init_osabi): Register solib_aix_so_ops.
* rs6000-nat.c: Remove "xcoffsolib.h" include. Include
"xml-utils.h".
(map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
(vmap_symtab, fixup_breakpoints): Delete.
(rs6000_xfer_shared_libraries): New function.
(rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
(vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
(xcoff_relocate_symtab, xcoff_relocate_core): Delete.
(rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
(rs6000_xfer_shared_library): New function.
(find_toc_address): Delete.
(_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
* rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
* xcoffread.c (record_minimal_symbol): Reloate symbol address
before creating minimal symbol. Adjust function description
accordingly.
(scan_xcoff_symtab): Replace call to
prim_record_minimal_symbol_and_info by call to
record_minimal_symbol.
(xcoff_symfile_offsets): Reimplement mostly as a wrapper
around default_symfile_offsets.
* configure.tgt: Add solib-aix.o to gdb_target_obs for
powerpc-aix targets.
* config/rs6000/nm-rs6000.h: Delete.
* config/powerpc/aix.mh (NAT_FILE): Delete.
(NATDEPFILES): Remove xcoffsolib.o.
* Makefile.in (XMLFILES): Add library-list-aix.dtd.
(ALL_TARGET_OBS): Add solib-aix.o.
(HFILES_NO_SRCDIR): Remove xcoffsolib.h and
config/rs6000/nm-rs6000.h. Add solib-aix.h.
(ALLDEPFILES): Add solib-aix.c. Remove xcoffsolib.c.
* xcoffsolib.h, xcoffsolib.c: Delete.
* solib.c (reload_shared_libraries): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK.
* breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
(disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
(momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
comment.
* corelow.c (deprecated_core_resize_section_table): Delete.
* exec.c: Remove include of xcoffsolib.h".
(map_vmap, vmap): Delete.
(exec_close_1): Remove references to vmap.
(exec_file_attach): Remove vmap handling code, and reference
to DEPRECATED_IBM6000_TARGET.
(bfdsec_to_vmap): Delete.
(exec_files_info): Remove block of code handling VMAP.
* infcmd.c (post_create_inferior): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
* infrun.c (follow_exec): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK.
* stack.c (print_frame): Remove reference to PC_SOLIB.
* solib-dsbt.c (dsbt_current_sos): Adjust comment.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (frv_current_sos): Likewise.
gdb/doc/ChangeLog:
* gdbint.texinfo (Algorithms): Remove entries documenting
DEPRECATED_IBM6000_TARGET, SOLIB_ADD, and
SOLIB_CREATE_INFERIOR_HOOK.
|
|
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
|
|
2013-03-29 Yao Qi <yao@codesourcery.com>
* corelow.c: Include "completer.h".
(_initialize_corelow): Call add_target_with_completer with
argument 'filename_completer'.
* tracepoint.c: Likewise.
* exec.c (_initialize_exec): Likewise.
* target.c (add_target): Rename to ...
(add_target_with_completer): ... this. Call set_cmd_completer
if parameter completer is not NULL.
(add_target): New.
* target.h: Include "command.h".
(add_target_with_completer): Declare it.
gdb/testsuite:
2013-03-29 Yao Qi <yao@codesourcery.com>
* gdb.base/completion.exp: Test completion of commands
"target core", "target tfile" and "target exec".
* gdb.trace/tfile.exp: Test completion of command
"target tfile".
|
|
Code cleanup.
* bfd-target.c (target_bfd_xclose): Remove parameter quitting.
* bsd-kvm.c (bsd_kvm_close): Likewise.
* bsd-uthread.c (bsd_uthread_close): Likewise.
* corelow.c (core_close): Likewise.
(core_close_cleanup): Remove parameter quitting from a caller.
* event-top.c (async_disconnect): Likewise.
* exec.c (exec_close_1): Remove parameter quitting.
* go32-nat.c (go32_close): Likewise.
* linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
parameter quitting from a caller.
* mips-linux-nat.c (super_close): Remove parameter quitting from the
variable.
(mips_linux_close): Remove parameter quitting. Remove parameter
quitting from a caller.
* monitor.c (monitor_close): Remove parameter quitting.
* monitor.h (monitor_close): Likewise.
* record-btrace.c (record_btrace_close): Likewise.
* record-full.c (record_full_close): Likewise.
* remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
it also from fprintf_unfiltered.
* remote-mips.c (mips_close): Remove parameter quitting.
(mips_detach): Remove parameter quitting from a caller.
* remote-sim.c (gdbsim_close): Remove parameter quitting.
(gdbsim_close): Remove duplicate function comment. Remove parameter
quitting and remove it also from printf_filtered.
* remote.c (remote_close): Remove parameter quitting.
* solib-svr4.c (enable_break): Remove parameter quitting from a caller.
* target.c (update_current_target): Remove parameter int from to_close
de_fault.
(push_target, unpush_target, pop_target): Remove parameter quitting from
a caller.
(pop_all_targets_above, pop_all_targets): Remove parameter quitting.
Remove parameter quitting from a caller.
(target_preopen): Remove parameter quitting from a caller.
(target_close): Remove parameter quitting. Remove parameter quitting
from a caller two times. Remove parameter quitting also from
fprintf_unfiltered.
* target.h (struct target_ops): Remove parameter quitting and as int
from fields to_xclose and to_close.
(extern struct target_ops current_target):
(target_close, pop_all_targets): Remove parameter quitting. Update the
comment.
(pop_all_targets_above): Remove parameter quitting.
* top.c (quit_target): Remove parameter quitting from a caller.
* tracepoint.c (tfile_close): Remove parameter quitting.
* windows-nat.c (windows_close): Remove parameter quitting.
|
|
* charset.c (intermediate_encoding): Remove unused i.
* completer.c (signal_completer): Remove unused i.
* continuations.c (discard_my_continuations_1): Remove unused
continuation_ptr.
* corelow.c (core_close): Remove unuseD name.
(get_core_siginfo): Remove unused pid.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
i, cps.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
(loclist_describe_location): Remove unused first.
* event-top.c (command_line_handler): Remove unused got_eof.
* exec.c (exec_close_1): Remove unused need_symtab_cleanup.
(resize_section_table): Remove unused old_value.
* gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
* gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
* i386-tdep.c (i386_process_record): Remove unused rex.
* infcmd.c (get_return_value): Remove unused uiout.
* jv-lang.c (type_from_class): Remove unused is_array.
* jv-valprint.c (java_val_print): Remove unused i.
* linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
* linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
* m2-typeprint.c (m2_print_type): Remove unused code.
* macroexp.c (get_character_constant): Remove unused body_start.
(macro_stringify): Remove unused result.
* objc-lang.c (find_methods): Remove unused gdbarch.
* objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
* regcache.c (regcache_cooked_read): Remove unused gdbarch.
* stack.c (print_frame_args): Remove unused summary.
* thread.c (thread_apply_command): Remove unused p.
* valarith.c (value_x_unop): Remove unused mangle_ptr.
* valops.c (search_struct_method): Remove unused skip.
* valprint.c (generic_val_print): Remove unused byte_order.
* varobj.c (varobj_update): Remove unused changed.
* cli/cli-cmds.c (complete_command): Remove unused next_item.
(alias_command): Remove unused c.
* mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
* mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
format.
(mi_cmd_data_write_memory): Remove unused word_format.
(mi_cmd_data_write_memory_bytes): Remove unused r.
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
p_start, p_end.
* python/python.c (_initialize_python): Remove unused cmd_name, cmd.
* tui/tui-disasm.c (tui_set_disassem_content): Remove unused
line_width.
Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00766.html
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
* NEWS: Mention "info proc" and core files.
* corelow.c (core_info_proc): New function.
(init_core_ops): Set to_info_proc.
* gdbarch.c, gdbarch.h: Rebuild.
* gdbarch.sh (core_info_proc): New method.
* infcmd.c (info_proc_cmd_1): Invoke target_info_proc first.
* linux-tdep.c (linux_core_info_proc_mappings)
(linux_core_info_proc): New functions.
(linux_find_memory_region_ftype): New typedef.
(linux_find_memory_regions_full): New function, from
linux_find_memory_regions.
(struct linux_find_memory_regions_data): New.
(linux_find_memory_regions_thunk): New function.
(linux_find_memory_regions): Rewrite.
(struct linux_make_mappings_data): New.
(linux_make_mappings_callback)
(linux_make_mappings_corefile_notes): New functions.
(linux_make_corefile_notes): Call linux_make_mappings_corefile_notes.
(linux_init_abi): Call set_gdbarch_core_info_proc.
* target.c (target_info_proc): Return 'int'.
* target.h (target_info_proc): Update.
gdb/doc
* gdb.texinfo (SVR4 Process Information): Mention core files.
gdb/testsuite
* gdb.base/info-proc.exp: Add core file tests.
bfd
* elf.c (elfcore_grok_note) <NT_FILE>: New case.
|
|
* linux-tdep.c (linux_make_siginfo_note): New function.
(linux_make_corefile_notes): Use it.
* corelow.c (get_core_siginfo): New function.
(core_xfer_partial) <TARGET_OBJECT_SIGNAL_INFO>: New case.
gdb/testsuite
* gdb.base/siginfo-obj.exp: Create core file. Test siginfo from
core files, if possible.
* gdb.base/siginfo-thread.c: New file
* gdb.base/siginfo-thread.exp: New file
bfd
* elf.c (elfcore_grok_note) <NT_SIGINFO>: New case; make
pseudosection.
|
|
* gdbarch.sh: Remove references to gdbarch_swap.
* corelow.c (core_open): Remove obsolete comment.
|
|
(bfd_openw_with_cleanup): Use gdb_bfd_openw.
* corelow.c (core_open): Use gdb_bfd_fopen.
* dsrec.c (load_srec): Use gdb_bfd_openr.
* exec.c (exec_file_attach): Use gdb_bfd_fopen.
* gcore.c (gcore_memory_sections): Use gdb_bfd_openw.
* gdb_bfd.c (gdb_bfd_fopen, gdb_bfd_openr, gdb_bfd_openw)
(gdb_bfd_openr_iovec, gdb_bfd_openr_next_archived_file)
(gdb_bfd_fdopenr): New functions.
* gdb_bfd.h (gdb_bfd_fopen, gdb_bfd_openr, gdb_bfd_openw)
(gdb_bfd_openr_iovec, gdb_bfd_openr_next_archived_file)
(gdb_bfd_fdopenr): Declare.
* jit.c (bfd_open_from_target_memory): Use gdb_bfd_openr_iovec.
* m32-rom.c (m32r_load, m32r_upload_command): Use gdb_bfd_openr.
* machoread.c (macho_symfile_read_all_oso): Use gdb_bfd_openr,
gdb_bfd_openr_next_archived_file.
(macho_check_dsym): Use gdb_bfd_openr.
(macho_add_oso_symfile): Don't call gdb_bfd_stash_filename.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_fdopenr.
* remote-m32r-sdi.c (m32r_load): Use gdb_bfd_openr.
* remote-mips.c (mips_load_srec, pmon_load_fast): Use
gdb_bfd_openr.
* remote.c (remote_bfd_open): Use gdb_bfd_openr_iovec.
* rs6000-nat.c (add_vmap): Use gdb_bfd_openr, gdb_bfd_fdopenr,
gdb_bfd_openr_next_archived_file.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Use gdb_bfd_openr.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use
gdb_bfd_openr.
* solib-spu.c (spu_bfd_fopen): Use gdb_bfd_openr_iovec.
* solib.c (solib_bfd_fopen): Use gdb_bfd_fopen.
* spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_openr_iovec.
* symfile.c (bfd_open_maybe_remote): Use gdb_bfd_openr.
(symfile_bfd_open): Use gdb_bfd_fopen.
(generic_load): Use gdb_bfd_openr.
* windows-nat.c (windows_make_so): Use gdb_bfd_openr.
|
|
* cli/cli-dump.c (bfd_openr_with_cleanup)
(bfd_openw_with_cleanup): Update.
* corelow.c (core_open): Update.
* dsrec.c (load_srec): Update.
* exec.c (exec_file_attach): Update.
* gcore.c (create_gcore_bfd): Update.
* gdb_bfd.c (gdb_bfd_ref): Return void.
(gdb_bfd_open): Update.
* gdb_bfd.h (gdb_bfd_ref): Return void.
Update comments.
* jit.c (jit_bfd_try_read_symtab): Update.
* m32r-rom.c (m32r_load, m32r_upload_command): Update.
* machoread.c (macho_symfile_read_all_oso): Update.
(macho_check_dsym): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* remote-m32r-sdi.c (m32r_load): Update.
* remote-mips.c (mips_load_srec, pmon_load_fast): Update.
* rs6000-nat.c (add_vmap): Update.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-spu.c (spu_bfd_open): Update.
* solib.c (solib_bfd_fopen, solib_read_symbols): Update.
* spu-linux-nat.c (spu_bfd_open): Update.
* symfile.c (bfd_open_maybe_remote, symfile_bfd_open)
(generic_load): Update.
* windows-nat.c (windows_make_so): Update.
|
|
make_cleanup_bfd_close.
* defs.h (make_cleanup_bfd_unref): Rename from
make_cleanup_bfd_close.
* cli/cli-dump.c (bfd_openr_with_cleanup): Update.
(bfd_openw_with_cleanup): Update.
* corelow.c (core_open): Update.
* dsrec.c (load_srec): Update.
* m32r-rom.c (m32r_load, m32r_upload_command): Update.
* remote-m32r-sdi.c (m32r_load): Update.
* remote-mips.c (mips_load_srec): Update.
(pmon_load_fast): Update.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Update.
(darwin_bfd_open): Update.
* solib.c (solib_bfd_fopen): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Update.
(symfile_bfd_open): Update.
(generic_load): Update.
|
|
gdb_bfd_stash_filename.
(load_command): Open the new BFD before freeing the old.
(bfd_open_maybe_remote): Call gdb_bfd_stash_filename.
* symfile-mem.c (symbol_file_add_from_memory): Don't copy name.
Call gdb_bfd_stash_filename.
* spu-linux-nat.c (spu_bfd_open): Don't copy name.
* solib-spu.c (spu_bfd_fopen): Don't copy name. Call
gdb_bfd_stash_filename.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Free found_pathname.
* rs6000-nat.c (add_vmap): Don't copy filename. Call
gdb_bfd_stash_filename.
* remote.c (remote_bfd_open): Call gdb_bfd_stash_filename.
* machoread.c (macho_add_oso_symfile): Call
gdb_bfd_stash_filename.
(macho_symfile_read_all_oso): Arrange to free archive_name. Call
gdb_bfd_stash_filename.
(macho_check_dsym): Don't copy filename. Call
gdb_bfd_stash_filename.
* jit.c (bfd_open_from_target_memory): Don't copy the filename.
* gdb_bfd.c (gdb_bfd_stash_filename): New function.
* gdb_bfd.h (gdb_bfd_stash_filename): Declare.
* gcore.c (create_gcore_bfd): Call gdb_bfd_stash_filename.
* exec.c (exec_close): Don't free the BFD's filename.
(exec_file_attach): Don't copy the filename. Call
gdb_bfd_stash_filename.
* corelow.c (core_close): Don't free the BFD's filename.
(core_open): Call gdb_bfd_stash_filename.
* corefile.c (reopen_exec_file): Remove #if 0 code.
* solib.c (solib_bfd_fopen): Call gdb_bfd_stash_filename. Free
pathname.
* dwarf2read.c (try_open_dwo_file): Call gdb_bfd_stash_filename.
|
|
gdb_bfd_unref.
(free_dwo_file): Use gdb_bfd_unref.
* cli/cli-dump.c: Include gdb_bfd.h.
(bfd_openw_with_cleanup): Use gdb_bfd_ref.
(bfd_openr_with_cleanup): Likewise.
* windows-nat.c (windows_make_so): Use gdb_bfd_ref,
gdb_bfd_unref.
* utils.c: Include gdb_bfd.h.
(do_bfd_close_cleanup): Use gdb_bfd_unref.
* symfile.c: Include gdb_bfd.h.
(separate_debug_file_exists): Use gdb_bfd_unref.
(bfd_open_maybe_remote): Use gdb_bfd_ref.
(symfile_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
(generic_load): Use gdb_bfd_ref.
(reread_symbols): Use gdb_bfd_unref.
* symfile-mem.c: Include gdb_bfd.h.
(symbol_file_add_from_memory): Use make_cleanup_bfd_close.
* spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
* solib.c: Include gdb_bfd.h.
(solib_bfd_fopen): Use gdb_bfd_ref.
(solib_bfd_open): Use gdb_bfd_unref.
(free_so_symbols): Use gdb_bfd_unref.
(reload_shared_libraries_1): Use gdb_bfd_unref.
* solib-spu.c: Include gdb_bfd.h.
(spu_bfd_fopen): Use gdb_bfd_ref, gdb_bfd_unref.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use gdb_bfd_ref,
gdb_bfd_unref.
* solib-frv.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-dsbt.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-darwin.c: Include gdb_bfd.h.
(darwin_solib_get_all_image_info_addr_at_init): Use gdb_bfd_ref,
gdb_bfd_unref.
(darwin_bfd_open): Use gdb_bfd_unref.
* rs6000-nat.c (add_vmap): Use gdb_bfd_ref, gdb_bfd_unref.
* remote-mips.c: Include gdb_bfd.h.
(mips_load_srec): Use gdb_bfd_ref.
(pmon_load_fast): Use gdb_bfd_ref.
* remote-m32r-sdi.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
* record.c: Include gdb_bfd.h.
(record_save_cleanups): Use gdb_bfd_unref.
(cmd_record_save): Use gdb_bfd_unref.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_ref,
gdb_bfd_unref.
* objfiles.h (gdb_bfd_close_or_warn): Remove.
(gdb_bfd_ref, gdb_bfd_unref): Move to gdb_bfd.h.
* objfiles.c: Include gdb_bfd.h.
(free_objfile): Use gdb_bfd_unref.
(gdb_bfd_close_or_warn, gdb_bfd_ref, gdb_bfd_unref): Move to
gdb_bfd.c.
* machoread.c (macho_add_oso_symfile): Use gdb_bfd_unref.
(macho_symfile_read_all_oso): Use gdb_bfd_ref, gdb_bfd_unref.
(macho_check_dsym): Likewise.
* m32r-rom.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
(m32r_upload_command): Use gdb_bfd_ref.
* jit.c: Include gdb_bfd.h.
(jit_bfd_try_read_symtab): Use gdb_bfd_ref, gdb_bfd_unref.
* gdb_bfd.h: New file.
* gdb_bfd.c: New file.
* gcore.c: Include gdb_bfd.h.
(create_gcore_bfd): Use gdb_bfd_ref.
(do_bfd_delete_cleanup): Use gdb_bfd_unref.
(gcore_command): Use gdb_bfd_unref.
* exec.c: Include gdb_bfd.h.
(exec_close): Use gdb_bfd_unref.
(exec_close_1): Use gdb_bfd_unref.
(exec_file_attach): Use gdb_bfd_ref.
* elfread.c: Include gdb_bfd.h.
(build_id_verify): Use gdb_bfd_unref.
* dsrec.c: Include gdb_bfd.h.
(load_srec): Use gdb_bfd_ref.
* corelow.c: Include gdb_bfd.h.
(core_close): Use gdb_bfd_unref.
(core_open): Use gdb_bfd_ref.
* bfd-target.c: Include gdb_bfd.h.
(target_bfd_xclose): Use gdb_bfd_unref.
(target_bfd_reopen): Use gdb_bfd_ref.
* Makefile.in (SFILES): Add gdb_bfd.c.
(HFILES_NO_SRCDIR): Add gdb_bfd.h.
(COMMON_OBS): Add gdb_bfd.o.
|
