| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2019-07-09 | Rename common to gdbsupport | Tom Tromey | 1 | -95/+0 | |
| This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport. | |||||
| 2019-02-12 | Add a new function child_path. | John Baldwin | 1 | -0/+6 | |
| child_path returns a pointer to the first component in a child path that comes after a parent path. This does not depend on trying to stat() the paths since they may describe remote paths but instead relies on filename parsing. The function requires that the child path describe a filename that contains at least one component below the parent path and returns a pointer to the first component. gdb/ChangeLog: * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add unittests/child-path-selftests.c. * common/pathstuff.c (child_path): New function. * common/pathstuff.h (child_path): New prototype. * unittests/child-path-selftests.c: New file. | |||||
| 2019-02-07 | Normalize include guards in gdb | Tom Tromey | 1 | -3/+3 | |
| While working on my other scripts to deal with gdb headers, I noticed that some files were missing include guards. I wrote a script to add the missing ones, but found that using the obvious names for the guards ran into clashes -- for example, gdb/nat/linux-nat.h used "LINUX_NAT_H", but this was also the script's choice for gdb/linux-nat.h. So, I changed the script to normalize all include guards in gdb. This patch is the result. As usual the script is available here: https://github.com/tromey/gdb-refactoring-scripts Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the buildbot. gdb/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * yy-remap.h: Add include guard. * xtensa-tdep.h: Add include guard. * xcoffread.h: Rename include guard. * varobj-iter.h: Add include guard. * tui/tui.h: Rename include guard. * tui/tui-winsource.h: Rename include guard. * tui/tui-wingeneral.h: Rename include guard. * tui/tui-windata.h: Rename include guard. * tui/tui-win.h: Rename include guard. * tui/tui-stack.h: Rename include guard. * tui/tui-source.h: Rename include guard. * tui/tui-regs.h: Rename include guard. * tui/tui-out.h: Rename include guard. * tui/tui-layout.h: Rename include guard. * tui/tui-io.h: Rename include guard. * tui/tui-hooks.h: Rename include guard. * tui/tui-file.h: Rename include guard. * tui/tui-disasm.h: Rename include guard. * tui/tui-data.h: Rename include guard. * tui/tui-command.h: Rename include guard. * tic6x-tdep.h: Add include guard. * target/waitstatus.h: Rename include guard. * target/wait.h: Rename include guard. * target/target.h: Rename include guard. * target/resume.h: Rename include guard. * target-float.h: Rename include guard. * stabsread.h: Add include guard. * rs6000-tdep.h: Add include guard. * riscv-fbsd-tdep.h: Add include guard. * regformats/regdef.h: Rename include guard. * record.h: Rename include guard. * python/python.h: Rename include guard. * python/python-internal.h: Rename include guard. * python/py-stopevent.h: Rename include guard. * python/py-ref.h: Rename include guard. * python/py-record.h: Rename include guard. * python/py-record-full.h: Rename include guard. * python/py-record-btrace.h: Rename include guard. * python/py-instruction.h: Rename include guard. * python/py-events.h: Rename include guard. * python/py-event.h: Rename include guard. * procfs.h: Add include guard. * proc-utils.h: Add include guard. * p-lang.h: Add include guard. * or1k-tdep.h: Rename include guard. * observable.h: Rename include guard. * nto-tdep.h: Rename include guard. * nat/x86-linux.h: Rename include guard. * nat/x86-linux-dregs.h: Rename include guard. * nat/x86-gcc-cpuid.h: Add include guard. * nat/x86-dregs.h: Rename include guard. * nat/x86-cpuid.h: Rename include guard. * nat/ppc-linux.h: Rename include guard. * nat/mips-linux-watch.h: Rename include guard. * nat/linux-waitpid.h: Rename include guard. * nat/linux-ptrace.h: Rename include guard. * nat/linux-procfs.h: Rename include guard. * nat/linux-osdata.h: Rename include guard. * nat/linux-nat.h: Rename include guard. * nat/linux-namespaces.h: Rename include guard. * nat/linux-btrace.h: Rename include guard. * nat/glibc_thread_db.h: Rename include guard. * nat/gdb_thread_db.h: Rename include guard. * nat/gdb_ptrace.h: Rename include guard. * nat/fork-inferior.h: Rename include guard. * nat/amd64-linux-siginfo.h: Rename include guard. * nat/aarch64-sve-linux-sigcontext.h: Rename include guard. * nat/aarch64-sve-linux-ptrace.h: Rename include guard. * nat/aarch64-linux.h: Rename include guard. * nat/aarch64-linux-hw-point.h: Rename include guard. * mn10300-tdep.h: Add include guard. * mips-linux-tdep.h: Add include guard. * mi/mi-parse.h: Rename include guard. * mi/mi-out.h: Rename include guard. * mi/mi-main.h: Rename include guard. * mi/mi-interp.h: Rename include guard. * mi/mi-getopt.h: Rename include guard. * mi/mi-console.h: Rename include guard. * mi/mi-common.h: Rename include guard. * mi/mi-cmds.h: Rename include guard. * mi/mi-cmd-break.h: Rename include guard. * m2-lang.h: Add include guard. * location.h: Rename include guard. * linux-record.h: Rename include guard. * linux-nat.h: Add include guard. * linux-fork.h: Add include guard. * i386-darwin-tdep.h: Rename include guard. * hppa-linux-offsets.h: Add include guard. * guile/guile.h: Rename include guard. * guile/guile-internal.h: Rename include guard. * gnu-nat.h: Rename include guard. * gdb-stabs.h: Rename include guard. * frv-tdep.h: Add include guard. * f-lang.h: Add include guard. * event-loop.h: Add include guard. * darwin-nat.h: Rename include guard. * cp-abi.h: Rename include guard. * config/sparc/nm-sol2.h: Rename include guard. * config/nm-nto.h: Rename include guard. * config/nm-linux.h: Add include guard. * config/i386/nm-i386gnu.h: Rename include guard. * config/djgpp/nl_types.h: Rename include guard. * config/djgpp/langinfo.h: Rename include guard. * compile/gcc-cp-plugin.h: Add include guard. * compile/gcc-c-plugin.h: Add include guard. * compile/compile.h: Rename include guard. * compile/compile-object-run.h: Rename include guard. * compile/compile-object-load.h: Rename include guard. * compile/compile-internal.h: Rename include guard. * compile/compile-cplus.h: Rename include guard. * compile/compile-c.h: Rename include guard. * common/xml-utils.h: Rename include guard. * common/x86-xstate.h: Rename include guard. * common/version.h: Rename include guard. * common/vec.h: Rename include guard. * common/tdesc.h: Rename include guard. * common/selftest.h: Rename include guard. * common/scoped_restore.h: Rename include guard. * common/scoped_mmap.h: Rename include guard. * common/scoped_fd.h: Rename include guard. * common/safe-iterator.h: Rename include guard. * common/run-time-clock.h: Rename include guard. * common/refcounted-object.h: Rename include guard. * common/queue.h: Rename include guard. * common/ptid.h: Rename include guard. * common/print-utils.h: Rename include guard. * common/preprocessor.h: Rename include guard. * common/pathstuff.h: Rename include guard. * common/observable.h: Rename include guard. * common/netstuff.h: Rename include guard. * common/job-control.h: Rename include guard. * common/host-defs.h: Rename include guard. * common/gdb_wait.h: Rename include guard. * common/gdb_vecs.h: Rename include guard. * common/gdb_unlinker.h: Rename include guard. * common/gdb_unique_ptr.h: Rename include guard. * common/gdb_tilde_expand.h: Rename include guard. * common/gdb_sys_time.h: Rename include guard. * common/gdb_string_view.h: Rename include guard. * common/gdb_splay_tree.h: Rename include guard. * common/gdb_setjmp.h: Rename include guard. * common/gdb_ref_ptr.h: Rename include guard. * common/gdb_optional.h: Rename include guard. * common/gdb_locale.h: Rename include guard. * common/gdb_assert.h: Rename include guard. * common/filtered-iterator.h: Rename include guard. * common/filestuff.h: Rename include guard. * common/fileio.h: Rename include guard. * common/environ.h: Rename include guard. * common/common-utils.h: Rename include guard. * common/common-types.h: Rename include guard. * common/common-regcache.h: Rename include guard. * common/common-inferior.h: Rename include guard. * common/common-gdbthread.h: Rename include guard. * common/common-exceptions.h: Rename include guard. * common/common-defs.h: Rename include guard. * common/common-debug.h: Rename include guard. * common/cleanups.h: Rename include guard. * common/buffer.h: Rename include guard. * common/btrace-common.h: Rename include guard. * common/break-common.h: Rename include guard. * cli/cli-utils.h: Rename include guard. * cli/cli-style.h: Rename include guard. * cli/cli-setshow.h: Rename include guard. * cli/cli-script.h: Rename include guard. * cli/cli-interp.h: Rename include guard. * cli/cli-decode.h: Rename include guard. * cli/cli-cmds.h: Rename include guard. * charset-list.h: Add include guard. * buildsym-legacy.h: Rename include guard. * bfin-tdep.h: Add include guard. * ax.h: Rename include guard. * arm-linux-tdep.h: Add include guard. * arm-fbsd-tdep.h: Add include guard. * arch/xtensa.h: Rename include guard. * arch/tic6x.h: Add include guard. * arch/i386.h: Add include guard. * arch/arm.h: Rename include guard. * arch/arm-linux.h: Rename include guard. * arch/arm-get-next-pcs.h: Rename include guard. * arch/amd64.h: Add include guard. * arch/aarch64-insn.h: Rename include guard. * arch-utils.h: Rename include guard. * annotate.h: Add include guard. * amd64-darwin-tdep.h: Rename include guard. * aarch64-linux-tdep.h: Add include guard. * aarch64-fbsd-tdep.h: Add include guard. * aarch32-linux-nat.h: Add include guard. gdb/gdbserver/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * x86-tdesc.h: Rename include guard. * x86-low.h: Add include guard. * wincecompat.h: Rename include guard. * win32-low.h: Add include guard. * utils.h: Rename include guard. * tracepoint.h: Rename include guard. * tdesc.h: Rename include guard. * target.h: Rename include guard. * server.h: Rename include guard. * remote-utils.h: Rename include guard. * regcache.h: Rename include guard. * nto-low.h: Rename include guard. * notif.h: Add include guard. * mem-break.h: Rename include guard. * lynx-low.h: Add include guard. * linux-x86-tdesc.h: Add include guard. * linux-s390-tdesc.h: Add include guard. * linux-ppc-tdesc-init.h: Add include guard. * linux-low.h: Add include guard. * linux-aarch64-tdesc.h: Add include guard. * linux-aarch32-low.h: Add include guard. * inferiors.h: Rename include guard. * i387-fp.h: Rename include guard. * hostio.h: Rename include guard. * gdbthread.h: Rename include guard. * gdb_proc_service.h: Rename include guard. * event-loop.h: Rename include guard. * dll.h: Rename include guard. * debug.h: Rename include guard. * ax.h: Rename include guard. | |||||
| 2019-01-01 | Update copyright year range in all GDB files. | Joel Brobecker | 1 | -1/+1 | |
| This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files. | |||||
| 2018-11-01 | Import mkdtemp gnulib module, fix mingw build | Simon Marchi | 1 | -0/+10 | |
| Building with mingw currently fails: CXX unittests/mkdir-recursive-selftests.o /home/emaisin/src/binutils-gdb/gdb/unittests/mkdir-recursive-selftests.c: In function ‘void selftests::mkdir_recursive::test()’: /home/emaisin/src/binutils-gdb/gdb/unittests/mkdir-recursive-selftests.c:49:20: error: ‘mkdtemp’ was not declared in this scope if (mkdtemp (base) == NULL) ^ Commit e418a61a67a ("Move mkdir_recursive to common/filestuff.c") moved this code, but also removed the HAVE_MKDTEMP guard which prevented the mkdtemp call to be compiled on mingw. We can either put back the HAVE_MKDTEMP ifdef, or import the gnulib mkdtemp module, which provides the function for mingw. Since the mkdir_recursive is susceptible to be used on mingw at some point, I think it would be nice to have it tested on mingw, so I did the latter. Once built, I tested it on Windows (copied the resulting gdb.exe on a Windows machine, ran it, and ran "maint selftest mkdir_recursive"). It failed, because the temporary directory is hardcoded to "/tmp/...". I therefore added and used a new get_standard_temp_dir function, which returns an appropriate temporary directory for the host platform. gdb/ChangeLog: * common/pathstuff.c (get_standard_temp_dir): New. * common/pathstuff.h (get_standard_temp_dir): New. * config.in: Re-generate. * configure: Re-generate. * configure.ac: Don't check for mkdtemp. * gnulib/aclocal-m4-deps.mk: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.am: Re-generate. * gnulib/import/Makefile.in: Re-generate. * gnulib/import/m4/gnulib-cache.m4: Re-generate. * gnulib/import/m4/gnulib-comp.m4: Re-generate. * gnulib/import/m4/mkdtemp.m4: New file. * gnulib/import/mkdtemp.c: New file. * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add mkdtemp module. * unittests/mkdir-recursive-selftests.c (test): Use get_standard_temp_dir. (_initialize_mkdir_recursive_selftests): Remove HAVE_MKDTEMP ifdef. * compile/compile.c (get_compile_file_tempdir): Likewise. | |||||
| 2018-10-27 | Move make_temp_filename to common/pathstuff.c | Tom Tromey | 1 | -0/+7 | |
| Currently make_temp_filename is a function local to write_psymtabs_to_index. This patch moves it to pathstuff.c so that it can be used from other places in gdb. gdb/ChangeLog 2018-10-27 Tom Tromey <tom@tromey.com> * dwarf-index-write.c (write_psymtabs_to_index): Move make_temp_filename to common/pathstuff.c. * common/pathstuff.h (make_temp_filename): Declare. * common/pathstuff.c (make_temp_filename): New function, moved from dwarf-index-write.c. | |||||
| 2018-10-27 | Unify shell-finding logic | Tom Tromey | 1 | -0/+5 | |
| I noticed several places in gdb that were using getenv("SHELL") and then falling back to "/bin/sh" if it returned NULL. This unifies these into a single function. gdb/ChangeLog 2018-10-27 Tom Tromey <tom@tromey.com> * procfs.c (procfs_target::create_inferior): Use get_shell. * cli/cli-cmds.c (shell_escape): Use get_shell. * windows-nat.c (windows_nat_target::create_inferior): Use get_shell. * common/pathstuff.c (get_shell): New function. * nat/fork-inferior.c (SHELL_FILE, get_startup_shell): Remove. (fork_inferior): Use get_shell. * common/pathstuff.h (get_shell): Declare. | |||||
| 2018-09-17 | Update get_standard_cache_dir for macOS | Tom Tromey | 1 | -3/+7 | |
| On macOS the usual cache directory is ~/Library/Caches. This patch changes get_standard_cache_dir to use that instead of XDG. gdb/ChangeLog 2018-09-17 Tom Tromey <tom@tromey.com> * common/pathstuff.c (get_standard_cache_dir): Use ~/Library/Caches on macOS. * common/pathstuff.h (get_standard_cache_dir): Update comment. gdb/doc/ChangeLog 2018-09-17 Tom Tromey <tom@tromey.com> * gdb.texinfo (Index Files): Update for cache directory change on macOS. | |||||
| 2018-08-07 | Add DWARF index cache | Simon Marchi | 1 | -0/+10 | |
| New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache. | |||||
| 2018-02-28 | Make gdbserver work with filename-only binaries | Sergio Durigan Junior | 1 | -0/+4 | |
| Simon mentioned on IRC that, after the startup-with-shell feature has been implemented on gdbserver, it is not possible to specify a filename-only binary, like: $ gdbserver :1234 a.out /bin/bash: line 0: exec: a.out: not found During startup program exited with code 127. Exiting This happens on systems where the current directory "." is not listed in the PATH environment variable. Although including "." in the PATH variable is a possible workaround, this can be considered a regression because before startup-with-shell it was possible to use only the filename (due to reason that gdbserver used "exec*" directly). The idea of the patch is to verify if the program path provided by the user (or by the remote protocol) contains a directory separator character. If it doesn't, it means we're dealing with a filename-only binary, so we call "gdb_abspath" to properly expand it and transform it into a full path. Otherwise, we leave the program path untouched. This mimicks the behaviour seen on GDB (look at "openp" and "attach_inferior", for example). I am also submitting a testcase which exercises the scenario described above. This test requires gdbserver to be executed in a different CWD than the original, so I also created a helper function, "with_cwd" (on testsuite/lib/gdb.exp), which takes care of cd'ing into and out of the specified dir. Built and regtested on BuildBot, without regressions. gdb/ChangeLog: 2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simon.marchi@polymtl.ca> * common/common-utils.c: Include "sys/stat.h". (is_regular_file): Move here from "source.c"; change return type to "bool". * common/common-utils.h (is_regular_file): New prototype. * common/pathstuff.c (contains_dir_separator): New function. * common/pathstuff.h (contains_dir_separator): New prototype. * source.c: Don't include "sys/stat.h". (is_regular_file): Move to "common/common-utils.c". gdb/gdbserver/ChangeLog: 2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com> * server.c: Include "filenames.h" and "pathstuff.h". (program_name): Delete variable. (program_path): New anonymous class. (get_exec_wrapper): Use "program_path" instead of "program_name". (handle_v_run): Likewise. (captured_main): Likewise. (process_serial_event): Likewise. gdb/testsuite/ChangeLog: 2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.server/abspath.exp: New file. * lib/gdb.exp (with_cwd): New procedure. | |||||
| 2018-02-28 | Create new common/pathstuff.[ch] | Sergio Durigan Junior | 1 | -0/+49 | |
| This commit moves the path manipulation routines found on utils.c to a new common/pathstuff.c, and updates the Makefile.in's accordingly. The routines moved are "gdb_realpath", "gdb_realpath_keepfile" and "gdb_abspath". This will be needed because gdbserver will have to call "gdb_abspath" on my next patch, which implements a way to expand the path of the inferior provided by the user in order to allow specifying just the binary name when starting gdbserver, like: $ gdbserver :1234 a.out With the recent addition of the startup-with-shell feature on gdbserver, this scenario doesn't work anymore if the user doesn't have the current directory listed in the PATH variable. I had to do a minor adjustment on "gdb_abspath" because we don't have access to "tilde_expand" on gdbserver, so now the function is using "gdb_tilde_expand" instead. Otherwise, the code is the same. Regression tested on the BuildBot, without regressions. gdb/ChangeLog: 2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (COMMON_SFILES): Add "common/pathstuff.c". (HFILES_NO_SRCDIR): Add "common/pathstuff.h". * auto-load.c: Include "common/pathstuff.h". * common/common-def.h (current_directory): Move here. * common/gdb_tilde_expand.c (gdb_tilde_expand_up): New function. * common/gdb_tilde_expand.h (gdb_tilde_expand_up): New prototype. * common/pathstuff.c: New file. * common/pathstuff.h: New file. * compile/compile.c: Include "common/pathstuff.h". * defs.h (current_directory): Move to "common/common-defs.h". * dwarf2read.c: Include "common/pathstuff.h". * exec.c: Likewise. * guile/scm-safe-call.c: Likewise. * linux-thread-db.c: Likewise. * main.c: Likewise. * nto-tdep.c: Likewise. * objfiles.c: Likewise. * source.c: Likewise. * symtab.c: Likewise. * utils.c: Include "common/pathstuff.h". (gdb_realpath): Move to "common/pathstuff.c". (gdb_realpath_keepfile): Likewise. (gdb_abspath): Likewise. * utils.h (gdb_realpath): Move to "common/pathstuff.h". (gdb_realpath_keepfile): Likewise. (gdb_abspath): Likewise. gdb/gdbserver/ChangeLog: 2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (SFILES): Add "$(srcdir)/common/pathstuff.c". (OBJS): Add "pathstuff.o". * server.c (current_directory): New global variable. (captured_main): Initialize "current_directory". | |||||
 |
index : riscv-gnu-toolchain/gdb.git | |
| Unnamed repository; edit this file 'description' to name the repository. | root |
| aboutsummaryrefslogtreecommitdiff |