aboutsummaryrefslogtreecommitdiff
path: root/gas/doc
AgeCommit message (Collapse)AuthorFilesLines
2021-08-11x86: introduce .bfloat16 directiveJan Beulich1-6/+8
This is to be able to generate data acted upon by AVX512-BF16 and AMX-BF16 insns. While not part of the IEEE standard, the format is sufficiently standardized to warrant handling in config/atof-ieee.c. Arm, where custom handling was implemented, may want to leverage this as well. To be able to also use the hex forms supported for other floating point formats, a small addition to the generic hex_float() is needed. Extend existing x86 testcases.
2021-08-11x86: introduce .hfloat directiveJan Beulich1-5/+8
This is to be able to generate data passed to {,V}CVTPH2PS and acted upon by AVX512-FP16 insns. To be able to also use the hex forms supported for other floating point formats, a small addition to the generic hex_float() is needed. Extend existing x86 testcases.
2021-08-11x86/ELF: fix .ds.x outputJan Beulich1-2/+2
The ELF psABI-s are quite clear here: On 32-bit the underlying data type is 12 bytes long (with 2 bytes of trailing padding), while on 64-bit it is 16 bytes long (with 6 bytes of padding). Make s_space() capable of handling 'x' (and 'p') type floating point being other than 12 bytes wide (also adjusting documentation). This requires duplicating the definition of X_PRECISION in the target speciifc header; the compiler would complain if this was out of sync with config/atof-ieee.c. Note that for now padding space doesn't get separated from actual storage, which means that things will work correctly only for little- endian cases, and which also means that by specifying large enough numbers padding space can be set to non-zero. Since the logic is needed for a single little-endian architecture only for now, I'm hoping that this might be acceptable for the time being; otherwise the change will become more intrusive. Note also that this brings the emitted data size of .ds.x vs .tfloat in line for non-ELF targets as well; the issue will be even more obvious when further taking into account a subsequent patch fixing .dc.x/.dcb.x (where output sizes currently differ depending on input format). Extend existing x86 testcases.
2021-08-05[PATCH 1/2] Enable Intel AVX512_FP16 instructionsCui,Lili1-1/+3
Intel AVX512 FP16 instructions use maps 3, 5 and 6. Maps 5 and 6 use 3 bits in the EVEX.mmm field (0b101, 0b110). Map 5 is for instructions that were FP32 in map 1 (0Fxx). Map 6 is for instructions that were FP32 in map 2 (0F38xx). There are some exceptions to this rule. Some things in map 1 (0Fxx) with imm8 operands predated our current conventions; those instructions moved to map 3. FP32 things in map 3 (0F3Axx) found new opcodes in map3 for FP16 because map3 is very sparsely populated. Most of the FP16 instructions share opcodes and prefix (EVEX.pp) bits with the related FP32 operations. Intel AVX512 FP16 instructions has new displacements scaling rules, please refer to the public software developer manual for detail information. gas/ 2021-08-05 Igor Tsimbalist <igor.v.tsimbalist@intel.com> H.J. Lu <hongjiu.lu@intel.com> Wei Xiao <wei3.xiao@intel.com> Lili Cui <lili.cui@intel.com> * config/tc-i386.c (struct Broadcast_Operation): Adjust comment. (cpu_arch): Add .avx512_fp16. (cpu_noarch): Add noavx512_fp16. (pte): Add evexmap5 and evexmap6. (build_evex_prefix): Handle EVEXMAP5 and EVEXMAP6. (check_VecOperations): Handle {1to32}. (check_VecOperands): Handle CheckRegNumb. (check_word_reg): Handle Toqword. (i386_error): Add invalid_dest_and_src_register_set. (match_template): Handle invalid_dest_and_src_register_set. * doc/c-i386.texi: Document avx512_fp16, noavx512_fp16. opcodes/ 2021-08-05 Igor Tsimbalist <igor.v.tsimbalist@intel.com> H.J. Lu <hongjiu.lu@intel.com> Wei Xiao <wei3.xiao@intel.com> Lili Cui <lili.cui@intel.com> * i386-dis.c (EXwScalarS): New. (EXxh): Ditto. (EXxhc): Ditto. (EXxmmqh): Ditto. (EXxmmqdh): Ditto. (EXEvexXwb): Ditto. (DistinctDest_Fixup): Ditto. (enum): Add xh_mode, evex_half_bcst_xmmqh_mode, evex_half_bcst_xmmqdh_mode and w_swap_mode. (enum): Add PREFIX_EVEX_0F3A08_W_0, PREFIX_EVEX_0F3A0A_W_0, PREFIX_EVEX_0F3A26, PREFIX_EVEX_0F3A27, PREFIX_EVEX_0F3A56, PREFIX_EVEX_0F3A57, PREFIX_EVEX_0F3A66, PREFIX_EVEX_0F3A67, PREFIX_EVEX_0F3AC2, PREFIX_EVEX_MAP5_10, PREFIX_EVEX_MAP5_11, PREFIX_EVEX_MAP5_1D, PREFIX_EVEX_MAP5_2A, PREFIX_EVEX_MAP5_2C, PREFIX_EVEX_MAP5_2D, PREFIX_EVEX_MAP5_2E, PREFIX_EVEX_MAP5_2F, PREFIX_EVEX_MAP5_51, PREFIX_EVEX_MAP5_58, PREFIX_EVEX_MAP5_59, PREFIX_EVEX_MAP5_5A_W_0, PREFIX_EVEX_MAP5_5A_W_1, PREFIX_EVEX_MAP5_5B_W_0, PREFIX_EVEX_MAP5_5B_W_1, PREFIX_EVEX_MAP5_5C, PREFIX_EVEX_MAP5_5D, PREFIX_EVEX_MAP5_5E, PREFIX_EVEX_MAP5_5F, PREFIX_EVEX_MAP5_78, PREFIX_EVEX_MAP5_79, PREFIX_EVEX_MAP5_7A, PREFIX_EVEX_MAP5_7B, PREFIX_EVEX_MAP5_7C, PREFIX_EVEX_MAP5_7D_W_0, PREFIX_EVEX_MAP6_13, PREFIX_EVEX_MAP6_56, PREFIX_EVEX_MAP6_57, PREFIX_EVEX_MAP6_D6, PREFIX_EVEX_MAP6_D7 (enum): Add EVEX_MAP5 and EVEX_MAP6. (enum): Add EVEX_W_MAP5_5A, EVEX_W_MAP5_5B, EVEX_W_MAP5_78_P_0, EVEX_W_MAP5_78_P_2, EVEX_W_MAP5_79_P_0, EVEX_W_MAP5_79_P_2, EVEX_W_MAP5_7A_P_2, EVEX_W_MAP5_7A_P_3, EVEX_W_MAP5_7B_P_2, EVEX_W_MAP5_7C_P_0, EVEX_W_MAP5_7C_P_2, EVEX_W_MAP5_7D, EVEX_W_MAP6_13_P_0, EVEX_W_MAP6_13_P_2, (get_valid_dis386): Properly handle new instructions. (intel_operand_size): Handle new modes. (OP_E_memory): Ditto. (OP_EX): Ditto. * i386-dis-evex.h: Updated for AVX512_FP16. * i386-dis-evex-mod.h: Updated for AVX512_FP16. * i386-dis-evex-prefix.h: Updated for AVX512_FP16. * i386-dis-evex-reg.h : Updated for AVX512_FP16. * i386-dis-evex-w.h : Updated for AVX512_FP16. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_FP16_FLAGS, and CPU_ANY_AVX512_FP16_FLAGS. Update CPU_ANY_AVX512F_FLAGS and CPU_ANY_AVX512BW_FLAGS. (cpu_flags): Add CpuAVX512_FP16. (opcode_modifiers): Add DistinctDest. * i386-opc.h (enum): (AVX512_FP16): New. (i386_opcode_modifier): Add reqdistinctreg. (i386_cpu_flags): Add cpuavx512_fp16. (EVEXMAP5): Defined as a macro. (EVEXMAP6): Ditto. * i386-opc.tbl: Add Intel AVX512_FP16 instructions. * i386-init.h: Regenerated. * i386-tbl.h: Ditto.
2021-06-14gas: drop TC_ADDRESS_BYTES conditionalsJan Beulich1-1/+2
I've been repeatedly confused by, in particular, the .dc.a potable[] entry being conditional. Grepping in gas/config/ reveals only very few targets actually #define-ing it. But as of 7be1c4891a20 the symbol is always defined, so #ifdef-s are pointless (and, as said, potentially confusing). Also adjust documentation to reflect this.
2021-05-26i386: Replace movsb with movsxbSebastien Villemot1-1/+1
PR gas/27906 * doc/c-i386.texi: Replace movsb with movsxb as an alias for movsbq.
2021-05-08support generating multi-html pages in parallelMike Frysinger2-2/+12
Use the pattern from other projects where we generate the html pages in a dir named the same as the project. So now we have: gas/doc/gas.html - single html page gas/doc/gas/ - multiple html pages This works for projects that have a doc/ subdir already, but gprof & ld require a little tweaking since they generate their docs in their respective toplevels.
2021-05-08generate single html manual page by defaultMike Frysinger2-2/+4
This better matches other GNU projects like autoconf/automake where the html manual is the single page form. We'll support the multi-page form in a follow up change.
2021-05-07Add a generic .bss directive for ELF based targets.Nick Clifton1-0/+13
PR 3136 * config/obj-elf.c (elf_pseudo_table): Add entry for .bss. (obj_elf_bss): New function. Change to the .bss section. Support an optional subsection number. (obj_elf_change_section): Call obj_elf_section_change_hook. (obj_elf_section): Likewise. (obj_elf_data): Likewise. (obj_elf_text): Likewise. (obj_elf_struct): Likewise. (obj_elf_subsection): Likewise. (obj_elf_previous): Likewise. * config/obj-elf.h (obj_elf_bss): Prototype. * doc/as.texi (Bss): New node.
2021-04-19gas: drop sprint_value()Jan Beulich1-7/+0
Its (documented) behavior is unhelpful in particular in 64-bit build environments: While printing large 32-bit numbers in decimal already isn't very meaningful to most people, this even more so goes for yet larger 64-bit numbers. bfd_sprintf_vma() still tries to limit the number of digits printed (without depending on a build system property), but uniformly produces hex output.
2021-04-05C99 gas configuryAlan Modra1-1/+0
Also remove alloca stuff since we don't use alloca in gas nowadays. * configure.ac: Don't check for string.h, strings.h, stdlib.h, errno.h, limits.h, locale.h or time.h. Don't check for unlink, remove, sbrk (unused) or setlocale. Adjust gas_test_headers. Don't check for errno, free, malloc, realoc, sbrk, strstr, getenv strstr, or vsnprintf declarations. (AC_ISC_POSIX, AC_FUNC_ALLOCA, AC_C_INLINE): Don't invoke. * as.h: Don't include alloca-conf.h, include config.h instead. Include string.h, stdlib.h, errno.h unconditionally. Remove various fallback declarations. * asintl.h: Don't test HAVE_LOCALE_H. * as.c: Don't test HAVE_SETLOCALE. * dwarf2dbg.c: Include limits.h unconditionally. * expr.c: Likewise. * sb.c: Likewise. * symbols.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-d30v.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-tic54x.c (tic54x_mlib): Call remove rather than unlink. * config.in: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate.
2021-02-19RISC-V: PR27158, fixed UJ/SB types and added CSS/CL/CS types for .insn.Nelson Chu1-67/+93
* Renamed obsolete UJ/SB types and RVC types, also added CSS/CL(CS) types, [VALID/EXTRACT/ENCODE macros] BTYPE_IMM: Renamed from SBTYPE_IMM. JTYPE_IMM: Renamed from UJTYPE_IMM. CITYPE_IMM: Renamed from RVC_IMM. CITYPE_LUI_IMM: Renamed from RVC_LUI_IMM. CITYPE_ADDI16SP_IMM: Renamed from RVC_ADDI16SP_IMM. CITYPE_LWSP_IMM: Renamed from RVC_LWSP_IMM. CITYPE_LDSP_IMM: Renamed from RVC_LDSP_IMM. CIWTYPE_IMM: Renamed from RVC_UIMM8. CIWTYPE_ADDI4SPN_IMM: Renamed from RVC_ADDI4SPN_IMM. CSSTYPE_IMM: Added for .insn without special encoding. CSSTYPE_SWSP_IMM: Renamed from RVC_SWSP_IMM. CSSTYPE_SDSP_IMM: Renamed from RVC_SDSP_IMM. CLTYPE_IMM: Added for .insn without special encoding. CLTYPE_LW_IMM: Renamed from RVC_LW_IMM. CLTYPE_LD_IMM: Renamed from RVC_LD_IMM. RVC_SIMM3: Unused and removed. CBTYPE_IMM: Renamed from RVC_B_IMM. CJTYPE_IMM: Renamed from RVC_J_IMM. * Added new operands and removed the unused ones, C5: Unsigned CL(CS) immediate, added for .insn directive. C6: Unsigned CSS immediate, added for .insn directive. Ci: Unused and removed. C<: Unused and removed. bfd/ PR 27158 * elfnn-riscv.c (perform_relocation): Updated encoding macros. (_bfd_riscv_relax_call): Likewise. (_bfd_riscv_relax_lui): Likewise. * elfxx-riscv.c (howto_table): Likewise. gas/ PR 27158 * config/tc-riscv.c (riscv_ip): Updated encoding macros. (md_apply_fix): Likewise. (md_convert_frag_branch): Likewise. (validate_riscv_insn): Likewise. Also arranged operands, including added C5 and C6 operands, and removed unused Ci and C< operands. * doc/c-riscv.texi: Updated and added CSS/CL/CS types. * testsuite/gas/riscv/insn.d: Added CSS/CL/CS instructions. * testsuite/gas/riscv/insn.s: Likewise. gdb/ PR 27158 * riscv-tdep.c (decode_ci_type_insn): Updated encoding macros. (decode_j_type_insn): Likewise. (decode_cj_type_insn): Likewise. (decode_b_type_insn): Likewise. (decode): Likewise. include/ PR 27158 * opcode/riscv.h: Updated encoding macros. opcodes/ PR 27158 * riscv-dis.c (print_insn_args): Updated encoding macros. * riscv-opc.c (MASK_RVC_IMM): defined to ENCODE_CITYPE_IMM. (match_c_addi16sp): Updated encoding macros. (match_c_lui): Likewise. (match_c_lui_with_hint): Likewise. (match_c_addi4spn): Likewise. (match_c_slli): Likewise. (match_slli_as_c_slli): Likewise. (match_c_slli64): Likewise. (match_srxi_as_c_srxi): Likewise. (riscv_insn_types): Added .insn css/cl/cs. sim/ PR 27158 * riscv/sim-main.c (execute_i): Updated encoding macros.
2021-02-15IBM Z: Implement instruction set extensionsAndreas Krebbel1-3/+4
opcodes/ * s390-mkopc.c (main): Accept arch14 as cpu string. * s390-opc.txt: Add new arch14 instructions. include/ * opcode/s390.h (enum s390_opcode_cpu_val): Add S390_OPCODE_ARCH14. gas/ * config/tc-s390.c (s390_parse_cpu): New entry for arch14. * doc/c-s390.texi: Document arch14 march option. * testsuite/gas/s390/s390.exp: Run the arch14 related tests. * testsuite/gas/s390/zarch-arch14.d: New test. * testsuite/gas/s390/zarch-arch14.s: New test.
2021-02-03IBM Z: Add missing vector formats to .insn docsAndreas Krebbel1-1/+49
gas/ * doc/c-s390.texi: Document vector instruction formats.
2021-01-14gas: make [248]byte directives available everywhereMike Frysinger1-7/+0
These aren't specific to ELF at all, and seem generally useful. So pull them out of the ELF backend and into the common core.
2021-01-13Regen Makefile.in for jobserver.m4 aclocal.m4 dependencyAlan Modra1-0/+1
bfd/ * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. binutils/ * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. gas/ * Makefile.in: Regenerate. * Makefile.in: Regenerate. gprof/ * Makefile.in: Regenerate. ld/ * Makefile.in: Regenerate. libctf/ * Makefile.in: Regenerate. opcodes/ * Makefile.in: Regenerate.
2021-01-11aarch64: Remove support for CSREKyrylo Tkachov1-2/+0
This patch removes support for the CSRE extension from aarch64 gas/objdump. CSRE (FEAT_CSRE) is part of the Future Architecture Technologies program and at this time Arm is withdrawing this particular feature. The patch removes the system registers and the CSR PDEC instruction. gas/ChangeLog * NEWS: Remove CSRE. * config/tc-aarch64.c (parse_csr_operand): Delete. (parse_operands): Delete handling of AARCH64_OPND_CSRE_CSR. (aarch64_features): Remove csre. * doc/c-aarch64.texi: Remove CSRE. * testsuite/gas/aarch64/csre.d: Delete. * testsuite/gas/aarch64/csre-invalid.s: Likewise. * testsuite/gas/aarch64/csre-invalid.d: Likewise. * testsuite/gas/aarch64/csre_csr.s: Likewise. * testsuite/gas/aarch64/csre_csr.d: Likewise. * testsuite/gas/aarch64/csre_csr-invalid.s: Likewise. * testsuite/gas/aarch64/csre_csr-invalid.l: Likewise. * testsuite/gas/aarch64/csre_csr-invalid.d: Likewise. include/ChangeLog * opcode/aarch64.h (AARCH64_FEATURE_CSRE): Delete. (aarch64_opnd): Delete AARCH64_OPND_CSRE_CSR. opcodes/ChangeLog * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. * aarch64-opc.c (aarch64_print_operand): Delete handling of AARCH64_OPND_CSRE_CSR. * aarch64-tbl.h (aarch64_feature_csre): Delete. (CSRE): Likewise. (_CSRE_INSN): Likewise. (aarch64_opcode_table): Delete csr.
2021-01-06RISC-V: Mention -mbig-endian and -mlittle-endian in docMarcus Comstedt2-0/+9
gas/ * doc/as.texi: Add -mlittle-endian and -mbig-endian to docs. * doc/c-riscv.texi: Likewise.
2021-01-01PR27116, Spelling errors found by Debian style checkerAlan Modra2-2/+2
PR 27116 bfd/ * xcofflink.c: Correct spelling in comments. binutils/ * coffgrok.c (do_type): Correct spelling of auxiliary in errors. * doc/binutils.texi: Correct grammar. * readelf.c (process_version_sections): Correct spelling of auxiliary in warning. * testsuite/binutils-all/vax/objdump.exp: Comment grammar fix. config/ * override.m4: Correct comment grammar. gas/ * config/tc-i386.c: Correct comment spelling. * config/tc-riscv.c: Likewise. * config/tc-s390.c: Correct comment grammar. * doc/c-i386.texi: Correct spelling. * doc/c-s390.texi: Correct grammar. gold/ * tilegx.cc: Correct comment spelling. gprof/ * README: Correct grammar. * gprof.texi: Likewise. include/ * coff/internal.h: Correct comment spelling. * coff/sym.h: Likewise. * opcode/aarch64.h: Likewise. ld/ * configure.tgt: Correct comment grammar. * emultempl/m68hc1xelf.em: Likewise. * ld.texi: Correct grammar.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra65-67/+67
2020-12-25gas: Update 80387 floating point 's' suffixH.J. Lu1-1/+1
Update 80387 floating point 's' suffix to read: * Integer constructors are '.word', '.long' or '.int', and '.quad' for the 16-, 32-, and 64-bit integer formats. The corresponding instruction mnemonic suffixes are 's' (short), 'l' (long), and 'q' (quad). instead of 's' (single). PR gas/27106 * doc/c-i386.texi: Update 80387 floating point 's' suffix
2020-11-23aarch64: Add support for Cortex-A78CPrzemyslaw Wirkus1-0/+1
This patch adds support for -mcpu=cortex-a78c command line option. For more information about this processor, see [0]: [0] https://developer.arm.com/ip-products/processors/cortex-a/cortex-a78c
2020-11-18Re: Stop Gas from generating line info or address rangesAlan Modra1-5/+9
* doc/as.texi (.nop): Document optional size arg. * dwarf2dbg.c (dwarf2_gen_line_info_1): Only check SEC_ALLOC when ELF. Warn whenever dwarf line number information is ignored. * frags.c (frag_offset_ignore_align_p): New function. * frags.h (frag_offset_ignore_align_p): Declare. * read.c (s_nop): Extend to support optional size arg. * testsuite/gas/elf/dwarf2-20.d: Expect warnings, and exact range. * testsuite/gas/elf/dwarf2-20.s: Emit 16 bytes worth of nops. * testsuite/gas/m68hc11/indexed12.d: Expect warnings.
2020-11-18Support SHF_GNU_RETAIN ELF section flagJozef Lawrynowicz1-0/+3
The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI. It is defined as follows: ========================================================= Section Attribute Flags +-------------------------------------+ | Name | Value | +-------------------------------------+ | SHF_GNU_RETAIN | 0x200000 (1 << 21) | +-------------------------------------+ SHF_GNU_RETAIN The link editor should not garbage collect the section. ========================================================= The .section directive accepts the "R" flag, which indicates SHF_GNU_RETAIN should be applied to the section. There is not a direct mapping of SHF_GNU_RETAIN to the BFD section flag SEC_KEEP. Keeping these flags distinct allows SHF_GNU_RETAIN sections to be explicitly removed by placing them in /DISCARD/. bfd/ChangeLog: * elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain. (struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits. * elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain for SHF_GNU_RETAIN. (_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is not supported by the OSABI. Adjust error messages. * elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from input BFD to output BFD. (bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set. binutils/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN. Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs. * testsuite/binutils-all/readelf.exp: Run new tests. Don't run run_dump_test when there isn't an assembler available. * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust comment. * testsuite/binutils-all/readelf-maskos-1a.d: New test. * testsuite/binutils-all/readelf-maskos-1b.d: New test. * testsuite/binutils-all/readelf-maskos.s: New test. * testsuite/binutils-all/retain1.s: New test. * testsuite/binutils-all/retain1a.d: New test. * testsuite/binutils-all/retain1b.d: New test. gas/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit between section declarations. (obj_elf_parse_section_letters): Handle 'R' flag. Handle numeric flag values within the SHF_MASKOS range. (obj_elf_section): Validate SHF_GNU_RETAIN usage. * doc/as.texi: Document 'R' flag to .section directive. * testsuite/gas/elf/elf.exp: Run new tests. * testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit. * testsuite/gas/elf/section10.s: Likewise. * testsuite/gas/elf/section22.d: New test. * testsuite/gas/elf/section22.s: New test. * testsuite/gas/elf/section23.s: New test. * testsuite/gas/elf/section23a.d: New test. * testsuite/gas/elf/section23b.d: New test. * testsuite/gas/elf/section23b.err: New test. * testsuite/gas/elf/section24.l: New test. * testsuite/gas/elf/section24.s: New test. * testsuite/gas/elf/section24a.d: New test. * testsuite/gas/elf/section24b.d: New test. include/ChangeLog: * elf/common.h (SHF_GNU_RETAIN): Define. ld/ChangeLog: * NEWS: Announce support for SHF_GNU_RETAIN. * ld.texi (garbage collection): Document SHF_GNU_RETAIN. (Output Section Discarding): Likewise. * testsuite/ld-elf/elf.exp: Run new tests. * testsuite/ld-elf/retain1.s: New test. * testsuite/ld-elf/retain1a.d: New test. * testsuite/ld-elf/retain1b.d: New test. * testsuite/ld-elf/retain2.d: New test. * testsuite/ld-elf/retain2.ld: New test. * testsuite/ld-elf/retain2.map: New test. * testsuite/ld-elf/retain3.d: New test. * testsuite/ld-elf/retain3.s: New test. * testsuite/ld-elf/retain4.d: New test. * testsuite/ld-elf/retain4.s: New test. * testsuite/ld-elf/retain5.d: New test. * testsuite/ld-elf/retain5.map: New test. * testsuite/ld-elf/retain5lib.s: New test. * testsuite/ld-elf/retain5main.s: New test. * testsuite/ld-elf/retain6a.d: New test. * testsuite/ld-elf/retain6b.d: New test. * testsuite/ld-elf/retain6lib.s: New test. * testsuite/ld-elf/retain6main.s: New test.
2020-11-17When reading string arguments for the assembler's string directives treat ↵Nick Clifton1-1/+3
space separated strings as a single entity. * read.c (stringer): Treat space separated, quote enclosed strings as a single string. * doc/as.texi (asciz): Mention this behaviour in the description of the asciz directive. * testsuite/gas/all/asciz.s: New test. * testsuite/gas/all/asciz.d: New test driver. * testsuite/gas/all/gas.exp: Run the new test.
2020-11-16aarch64: Add +pauth flag for Pointer Authentication featurePrzemyslaw Wirkus1-1/+3
New -march option +pauth enables PAuth vel PAC (Pointer Authentication) feature.
2020-11-16aarch64: Extract Condition flag manipulation feature from Armv8.4-APrzemyslaw Wirkus1-0/+6
Extract FLAGM (Condition flag manipulation) feature from Armv8.4-A. Please note that FLAGM stays a Armv8.4-A feature but now can be assigned to other architectures or CPUs. New -march option +flagm is added to enable independently this feature.
2020-11-16arm: Add support for Cortex-A78CPrzemyslaw Wirkus1-0/+1
This patch adds support for -mcpu=cortex-a78c command line option. For more information about this processor, see [0]: [0] https://developer.arm.com/ip-products/processors/cortex-a/cortex-a78c
2020-10-28aarch64: Add basic support for armv8.7-a architecturePrzemyslaw Wirkus1-1/+1
This patch adds support for AArch64 -march=armv8.7-a command line option in GAS. Please note that this change ONLY extends -march= command line interface with a new "armv8.7-a" option. Architectural changes like new instructions will be added in following patches. gas/ChangeLog: 2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * NEWS: Docs update. * config/tc-aarch64.c (armv8.7-a): New arch. * doc/c-aarch64.texi (-march=armv8.7-a): Update docs. include/ChangeLog: 2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_7): New feature bitmask. (AARCH64_ARCH_V8_7): New arch feature set. opcodes/ChangeLog: 2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * aarch64-tbl.h (ARMV8_7): New macro.
2020-10-20Add AMD znver3 processor supportGanesh Gopalasubramanian1-3/+8
gas/ * config/tc-i386.c (cpu_arch): Add CPU_ZNVER3_FLAGS flags. (i386_align_code): Add PROCESSOR_ZNVER cases. * doc/c-i386.texi: Add znver3, snp, invlpgb and tlbsync. * gas/i386/i386.exp: Add new znver3 test cases. * gas/i386/arch-14-znver3.d: New. * gas/i386/arch-14.d: New. * gas/i386/arch-14.s: New. * gas/i386/invlpgb.d: New. * gas/i386/invlpgb64.d: New. * gas/i386/invlpgb.s: New. * gas/i386/snp.d: New. * gas/i386/snp64.d: New. * gas/i386/snp.s: New. * gas/i386/tlbsync.d: New. * gas/i386/tlbsync.s: New. * gas/i386/x86-64-arch-4-znver3.d: New. * gas/i386/x86-64-arch-4.d: New. * gas/i386/x86-64-arch-4.s: New. opcodes/ * i386-dis.c (rm_table): Add tlbsync, snp, invlpgb. * i386-gen.c (cpu_flag_init): Add new CPU_INVLPGB_FLAGS, CPU_TLBSYNC_FLAGS, and CPU_SNP_FLAGS. Add CPU_ZNVER3_FLAGS. (cpu_flags): Add CpuINVLPGB, CpuTLBSYNC, CpuSNP. * i386-opc.h: Add CpuINVLPGB, CpuTLBSYNC, CpuSNP. * i386-opc.tbl: Add invlpgb, tlbsync, psmash, pvalidate, rmpupdate, rmpadjust. * i386-init.h: Re-generated. * i386-tbl.h: Re-generated.
2020-10-14x86: Support Intel AVX VNNIH.J. Lu1-1/+7
Intel AVX VNNI instructions are marked with CpuVEX_PREFIX. Without the pseudo {vex} prefix, mnemonics of Intel VNNI instructions are encoded with the EVEX prefix. The pseudo {vex} prefix can be used to encode mnemonics of Intel VNNI instructions with the VEX prefix. gas/ * NEWS: Add Intel AVX VNNI. * config/tc-i386.c (cpu_arch): Add .avx_vnni and noavx_vnni. (cpu_flags_match): Support CpuVEX_PREFIX. * doc/c-i386.texi: Document .avx_vnni, noavx_vnni and how to encode Intel VNNI instructions with VEX prefix. * testsuite/gas/i386/avx-vnni.d: New file. * testsuite/gas/i386/avx-vnni.s: Likewise. * testsuite/gas/i386/x86-64-avx-vnni.d: Likewise. * testsuite/gas/i386/x86-64-avx-vnni.s: Likewise. * testsuite/gas/i386/i386.exp: Run AVX VNNI tests. opcodes/ * i386-dis.c (PREFIX_VEX_0F3850): New. (PREFIX_VEX_0F3851): Likewise. (PREFIX_VEX_0F3852): Likewise. (PREFIX_VEX_0F3853): Likewise. (VEX_W_0F3850_P_2): Likewise. (VEX_W_0F3851_P_2): Likewise. (VEX_W_0F3852_P_2): Likewise. (VEX_W_0F3853_P_2): Likewise. (prefix_table): Add PREFIX_VEX_0F3850, PREFIX_VEX_0F3851, PREFIX_VEX_0F3852 and PREFIX_VEX_0F3853. (vex_table): Add VEX_W_0F3850_P_2, VEX_W_0F3851_P_2, VEX_W_0F3852_P_2 and VEX_W_0F3853_P_2. (putop): Add support for "XV" to print "{vex3}" pseudo prefix. * i386-gen.c (cpu_flag_init): Clear the CpuAVX_VNNI bit in CPU_UNKNOWN_FLAGS. Add CPU_AVX_VNNI_FLAGS and CPU_ANY_AVX_VNNI_FLAGS. (cpu_flags): Add CpuAVX_VNNI and CpuVEX_PREFIX. * i386-opc.h (CpuAVX_VNNI): New. (CpuVEX_PREFIX): Likewise. (i386_cpu_flags): Add cpuavx_vnni and cpuvex_prefix. * i386-opc.tbl: Add Intel AVX VNNI instructions. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2020-10-14x86: Add support for Intel HRESET instructionLili Cui1-1/+3
gas/ * NEWS: Add Intel HRESET. * config/tc-i386.c (cpu_arch): Add .hreset. (cpu_noarch): Likewise. * doc/c-i386.texi: Document .hreset, nohreset. * testsuite/gas/i386/i386.exp: Run HRESET tests. * testsuite/gas/i386/hreset.d: New file. * testsuite/gas/i386/x86-64-hreset.d: Likewise. * testsuite/gas/i386/hreset.s: Likewise. opcodes/ * i386-dis.c (PREFIX_0F3A0F): New. (MOD_0F3A0F_PREFIX_1): Likewise. (REG_0F3A0F_PREFIX_1_MOD_3): Likewise. (RM_0F3A0F_P_1_MOD_3_REG_0): Likewise. (prefix_table): Add PREFIX_0F3A0F. (mod_table): Add MOD_0F3A0F_PREFIX_1. (reg_table): Add REG_0F3A0F_PREFIX_1_MOD_3. (rm_table): Add RM_0F3A0F_P_1_MOD_3_REG_0. * i386-gen.c (cpu_flag_init): Add HRESET_FLAGS, CPU_ANY_HRESET_FLAGS. (cpu_flags): Add CpuHRESET. (output_i386_opcode): Allow 4 byte base_opcode. * i386-opc.h (enum): Add CpuHRESET. (i386_cpu_flags): Add cpuhreset. * i386-opc.tbl: Add Intel HRESET instruction. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2020-10-14x86: Support Intel UINTRLili Cui1-1/+3
gas/ * NEWS: Add Intel UINTR. * config/tc-i386.c (cpu_arch): Add .uintr. (cpu_noarch): Likewise. * doc/c-i386.texi: Document .uintr and nouintr. * testsuite/gas/i386/i386.exp: Run UINTR tests. * testsuite/gas/i386/x86-64-uintr.d: Likewise. * testsuite/gas/i386/x86-64-uintr.s: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_MOD_3_0F01_REG_5_RM_4, PREFIX_MOD_3_0F01_REG_5_RM_5, PREFIX_MOD_3_0F01_REG_5_RM_6, PREFIX_MOD_3_0F01_REG_5_RM_7, X86_64_0F01_REG_5_MOD_3_RM_4_PREFIX_1, X86_64_0F01_REG_5_MOD_3_RM_5_PREFIX_1, X86_64_0F01_REG_5_MOD_3_RM_6_PREFIX_1, X86_64_0F01_REG_5_MOD_3_RM_7_PREFIX_1, X86_64_0FC7_REG_6_MOD_3_PREFIX_1. (prefix_table): New instructions (see prefixes above). (rm_table): Likewise * i386-gen.c (cpu_flag_init): Add CPU_UINTR_FLAGS, CPU_ANY_UINTR_FLAGS. (cpu_flags): Add CpuUINTR. * i386-opc.h (enum): Add CpuUINTR. (i386_cpu_flags): Add cpuuintr. * i386-opc.tbl: Add UINTR insns. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2020-10-05Fix spelling mistakesSamanta Navarro2-2/+2
2020-10-05GAS: Update the .section directive so that a numeric section index can be ↵Nick Clifton1-2/+5
provided when the "o" flag is used. PR 26253 gas * config/obj-elf.c (obj_elf_section): Accept a numeric value for the "o" section flag. Interpret it as a section index. Allow an index of zero. * doc/as.texi: Document the new behaviour. * NEWS: Mention the new feature. Tidy entries. * testsuite/gas/elf/sh-link-zero.s: New test. * testsuite/gas/elf/sh-link-zero.d: New test driver. * testsuite/gas/elf/elf.exp: Run the new test. * testsuite/gas/elf/section21.l: Updated expected assembler output. bfd * elf.c (_bfd_elf_setup_sections): Do not complain about an sh_link value of zero when the SLF_LINK_ORDER flag is set. (assign_section_numbers): Likewise.
2020-10-02arm: add support for Cortex-A78 and Cortex-A78AEPrzemyslaw Wirkus1-0/+2
bfd/ChangeLog: 2020-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * cpu-arm.c: Add cortex-a78 and cortex-a78ae. gas/ChangeLog: 2020-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * config/tc-arm.c: Add cortex-a78 and cortex-a78ae cores. * doc/c-arm.texi: Update docs. * NEWS: Update news. * testsuite/gas/arm/cpu-cortex-a78.d: New test. * testsuite/gas/arm/cpu-cortex-a78ae.d: New test.
2020-10-01Add new directive to GAS: .attach_to_group.Nick Clifton1-1/+11
* config/obj-elf (elf_pseudo_table): Add attach_to_group. (obj_elf_attach_to_group): New function. * doc/as.texi: Document the new directive. * NEWS: Mention the new feature. * testsuite/gas/elf/attach-1.s: New test. * testsuite/gas/elf/attach-1.d: New test driver. * testsuite/gas/elf/attach-2.s: New test. * testsuite/gas/elf/attach-2.d: New test driver. * testsuite/gas/elf/attach-err.s: New test. * testsuite/gas/elf/attach-err.d: New test driver. * testsuite/gas/elf/attach-err.err: New test error output. * testsuite/gas/elf/elf.exp: Run the new tests.
2020-09-30[GAS][AArch64] Add support for Cortex-A78 and Cortex-A78AEPrzemyslaw Wirkus1-0/+2
* config/tc-aarch64.c: Add Cortex-A78 and Cortex-A78AE cores. * doc/c-aarch64.texi: Update docs. * NEWS: Update news.
2020-09-30aarch64: Add support for Neoverse N2 CPUAlex Coplan1-0/+1
This patch adds support for Arm's Neoverse N2 CPU to AArch64 binutils. gas/ChangeLog: * config/tc-aarch64.c (aarch64_cpus): Add neoverse-n2. * doc/c-aarch64.texi: Document support for Neoverse N2.
2020-09-28This patch adds support for Cortex-X1 for ARM.Przemyslaw Wirkus1-0/+1
bfd * cpu-arm.c: (processors) Add Cortex-X1. gas * config/tc-arm.c: (arm_cpus): Add Cortex-X1. * doc/c-arm.texi: Document -mcpu=cortex-x1. * testsuite/gas/arm/cpu-cortex-x1.d: New test.
2020-09-28This patch adds support for Cortex-X1Przemyslaw Wirkus1-1/+2
gas * config/tc-aarch64.c: (aarch64_cpus): Add Cortex-X1. * doc/c-aarch64.texi: Document -mcpu=cortex-x1.
2020-09-24arm: Add support for Neoverse V1 CPUAlex Coplan1-0/+1
This patch adds support for Arm's Neoverse V1 CPU to AArch32 binutils. gas/ChangeLog: 2020-09-24 Alex Coplan <alex.coplan@arm.com> * config/tc-arm.c (arm_cpus): Add Neoverse V1. * doc/c-arm.texi: Document Neoverse V1 support.
2020-09-24aarch64: Add support for Neoverse V1 CPUAlex Coplan1-0/+1
This adds support for Arm's Neoverse V1 CPU to AArch64 binutils. gas/ChangeLog: 2020-09-24 Alex Coplan <alex.coplan@arm.com> * config/tc-aarch64.c (aarch64_cpu_option_table): Add Neoverse V1. * doc/c-aarch64.texi: Document Neoverse V1 support.
2020-09-24arm: Add support for Neoverse N2 CPUAlex Coplan1-0/+1
This adds support for Arm's Neoverse N2 CPU to AArch32 binutils. The Neoverse N2 CPU builds AArch32 at EL0 and therefore needs support in the AArch32 assembler. gas/ChangeLog: 2020-09-24 Alex Coplan <alex.coplan@arm.com> * config/tc-arm.c (arm_cpus): Add Neoverse N2. * doc/c-arm.texi: Document -mcpu=neoverse-n2.
2020-09-24Add support for Intel TDX instructions.Cui,Lili1-0/+3
gas/ * NEWS: Add TDX. * config/tc-i386.c (cpu_arch): Add .tdx. (cpu_noarch): Likewise. * doc/c-i386.texi: Document tdx. * testsuite/gas/i386/i386.exp: Run tdx tests. * testsuite/gas/i386/tdx.d: Likewise. * testsuite/gas/i386/tdx.s: Likewise. * testsuite/gas/i386/x86-64-tdx.d: Likewise. * testsuite/gas/i386/x86-64-tdx.s: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_0F01_REG_1_RM_5, PREFIX_0F01_REG_1_RM_6, PREFIX_0F01_REG_1_RM_7, X86_64_0F01_REG_1_RM_5_P_2, X86_64_0F01_REG_1_RM_6_P_2, X86_64_0F01_REG_1_RM_7_P_2. (prefix_table): Likewise. (x86_64_table): Likewise. (rm_table): Likewise. * i386-gen.c (cpu_flag_init): Add CPU_TDX_FLAGS and CPU_ANY_TDX_FLAGS. (cpu_flags): Add CpuTDX. * i386-opc.h (enum): Add CpuTDX. (i386_cpu_flags): Add cputdx. * i386-opc.tbl: Add TDX insns. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2020-09-23Enable support to Intel Keylocker instructionsTerry Guo1-0/+5
gas/ * NEWS: Add Key Locker. * config/tc-i386.c (cpu_arch): Add .kl and .wide_kl. (cpu_noarch): Likewise. * doc/c-i386.texi: Document kl and wide_kl. * testsuite/gas/i386/i386.exp: Run keylocker tests. * testsuite/gas/i386/keylocker-intel.d: New test. * testsuite/gas/i386/keylocker.d: Likewise. * testsuite/gas/i386/keylocker.s: Likewise. * testsuite/gas/i386/x86-64-keylocker-intel.d: Likewise. * testsuite/gas/i386/x86-64-keylocker.d: Likewise. * testsuite/gas/i386/x86-64-keylocker.s: Likewise. * testsuite/gas/i386/x86-64-property-10.d: Likewise. * testsuite/gas/i386/property-10.d: Likewise. * testsuite/gas/i386/property-10.s: Likewise. opcodes/ * i386-dis.c (enum): Add REG_0F38D8_PREFIX_1, MOD_0F38FA_PREFIX_1, MOD_0F38FB_PREFIX_1, MOD_0F38DC_PREFIX_1, MOD_0F38DD_PREFIX_1, MOD_0F38DE_PREFIX_1, MOD_0F38DF_PREFIX_1, PREFIX_0F38D8, PREFIX_0F38FA, PREFIX_0F38FB. (reg_table): New instructions (see prefixes above). (prefix_table): Likewise. (three_byte_table): Likewise. (mod_table): Likewise * i386-gen.c (cpu_flag_init): Add CPU_KL_FLAGS, CPU_WIDE_KL_FLAGS, CPU_ANY_KL_FLAGS and CPU_ANY_WIDE_KL_FLAGS. (cpu_flags): Likewise. (operand_type_init): Likewise. * i386-opc.h (enum): Add CpuKL and CpuWide_KL. (i386_cpu_flags): Add cpukl and cpuwide_kl. * i386-opc.tbl: Add KL and WIDE_KL insns. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2020-09-14Add a new ".nop" directive to the assembler to allow the creation of no-op ↵Nick Clifton2-11/+31
instructions in an architeture neutral manner. * read.c (s_nop): New function. Handles the .nop directive. (potable): Add entry for "nop". (s_nops): Code tidy. * read.h (s_nop): Add prototype. * config/tc-bpf.h (md_single_noop_insn): Define. * config/tc-mmix.h (md_single_noop_insn): Define. * config/tc-or1k.h (md_single_noop_insn): Define. * config/tc-s12z.c (md_assemble): Preserve the input line pointer, rather than corrupting it. * write.c (relax_segment): Update error message regarding non-absolute values passed to .fill and .nops. * NEWS: Mention the new directive. * doc/as.texi: Document the new directive. * doc/internals.texi: Document the new internal macros used to implement the new directive. * testsuite/gas/all/nop.s: New test. * testsuite/gas/all/nop.d: New test control file. * testsuite/gas/all/gas.exp: Run the new test. * testsuite/gas/elf/dwarf-5-nop-for-line-table.s: New test. * testsuite/gas/elf/dwarf-5-nop-for-line-table.d: New test control file. * testsuite/gas/elf/elf.exp: Run the new test. * testsuite/gas/i386/space1.l: Adjust expected output.
2020-09-11gas: Don't error when .debug_line already exists, unless .loc was usedMark Wielaard1-2/+5
When -g was used to generate DWARF gas would error out when a .debug_line already exists. But when a .debug_info section already exists it would simply skip generating one without warning or error. Do the same for .debug_line. It is only an error when the user explicitly uses .loc directives and also generates the .debug_line table itself. The tests are unfortunately arch specific because the line table is only generated when actual instructions have been emitted. Use i386 because that is probably the most used architecture. Before this patch the new dwarf-line-2 testcase would fail, with this patch it succeeds (and doesn't try to add its own line table). gas/ChangeLog: * as.texi (-g): Explicitly mention when .debug_info and .debug_line are generated for the DWARF format. (Loc): Add that it is an error to both use a .loc directive and generate a .debug_line yourself. * dwarf2dbg.c (dwarf2_any_loc_directive_seen): New static variable. (dwarf2_directive_loc): Set dwarf2_any_loc_directive_seen to TRUE. (dwarf2_finish): Check dwarf2_any_loc_directive_seen before emitting an error. Only create .debug_line if it is empty (or doesn't exist). * testsuite/gas/i386/i386.exp: Add dwarf2-line-{1,2,3,4} when testing an elf target. * testsuite/gas/i386/dwarf2-line-{1,2,3,4}.{s,d,l}: New test files.
2020-09-08aarch64: Add -mcpu option for Cortex-R82Alex Coplan1-1/+2
This adds support for the Arm Cortex-R82 CPU in AArch64 GAS. For more information about this processor, see [0]. [0] : https://developer.arm.com/ip-products/processors/cortex-r/cortex-r82 gas/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * config/tc-aarch64.c (aarch64_cpus): Add Cortex-R82. * doc/c-aarch64.texi: Document -mcpu=cortex-r82.
2020-09-08aarch64: Add base support for Armv8-RAlex Coplan1-1/+1
This patch adds the basic infrastructure needed to support Armv8-R in AArch64 binutils: new command-line flags, new feature bits, a new BFD architecture, and support for differentiating between architecture variants in the disassembler. The new command-line options added by this patch are -march=armv8-r in GAS and -m aarch64:armv8-r in objdump. The disassembler support is necessary since Armv8-R AArch64 introduces a system register (VSCTLR_EL2) which shares an encoding with a different system register (TTBR0_EL2) in Armv8-A. This also allows us to use the correct preferred disassembly for the new DFB alias introduced in Armv8-R. bfd/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * archures.c (bfd_mach_aarch64_8R): New. * bfd-in2.h: Regenerate. * cpu-aarch64.c (bfd_aarch64_arch_v8_r): New. (bfd_aarch64_arch_ilp32): Update tail pointer. gas/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * config/tc-aarch64.c (aarch64_archs): Add armv8-r. * doc/c-aarch64.texi: Document -march=armv8-r. include/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_A): New. (AARCH64_FEATURE_V8_R): New. (AARCH64_ARCH_V8): Include new A-profile feature bit. (AARCH64_ARCH_V8_R): New. opcodes/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * aarch64-dis.c (arch_variant): New. (determine_disassembling_preference): Disassemble according to arch variant. (select_aarch64_variant): New. (print_insn_aarch64): Set feature set.