| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
This is a relatively straightforward patch to improve support for the
IBM Gekko and IBM Broadway processors. Broadway is functionally
equivalent to the IBM 750CL, while Gekko's functionality is a subset
of theirs. The patch simplifies this reality and adds -mgekko and
-mbroadway as aliases for -m750cl. I didn't feel it was worth wasting
a PPC_OPCODE_* bit to differentiate Gekko. The patch adds a number of
simplified mnemonics for special purpose register access. Notably,
Broadway adds 4 additional IBAT and DBAT registers but these are not
assigned sequential SPR numbers.
gas/
* config/tc-ppc.c (md_show_usage): Add -mgekko and -mbroadway.
* doc/as.texi (Target PowerPC options): Add -mgekko and -mbroadway.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* testsuite/gas/ppc/broadway.d,
* testsuite/gas/ppc/broadway.s: New test for broadway.
* testsuite/gas/ppc/ppc.exp: Run new test.
include/
* opcode/ppc.h (PPC_OPCODE_750): Adjust comment.
opcodes/
* ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway.
(powerpc_init_dialect): Handle bfd_mach_ppc_750.
* ppc-opc.c (insert_sprbat, extract_sprbat): New functions to
support disjointed BAT.
(powerpc_operands): Allow extra bit in SPRBAT_MASK. Add SPRGQR.
(XSPRGQR_MASK, GEKKO, BROADWAY): Define.
(powerpc_opcodes): Add 750cl extended mnemonics for spr access.
|
|
Binutils documentation uses a mix of spelling for the compound word
"command-line X". According to [1]:
"Sometimes compound words are written separately (nail polish),
sometimes with a hyphen (short-sighted) and sometimes as one word
(eyelashes). Often new compounds are written as two separate words and,
as they become more familiar, they are either connected with a hyphen
(-) or made into one word."
I think command-line X is common enough in our industry that the two
workds command and line should be connected. Since command-line is more
common than commandline, I propose to update binutils documentation to
consistently use "command-line" when this is used as an adjective to a
noun (eg. command-line argument, command-line switch, command-line
option and command-line flag). I've left occurences of "the command
line" as is. I've also left gdb, sim and readline alone and have only
touched public documentation (texi and NEWS files).
[1]
http://dictionary.cambridge.org/grammar/british-grammar/word-formation/compounds
2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* doc/bfdint.texi: Use command-line consistently when used in a
compount word.
* doc/bfdsumm.texi: Likewise.
binutils/
* NEWS: Use command-line consistently when used in a compount word.
* doc/binutils.texi: Likewise and fix trailing whitespace on same
line.
gas/
* NEWS: Use command-line consistently when used in a compount word.
* doc/as.texi: Likewise.
* doc/c-aarch64.texi: Likewise.
* doc/c-alpha.texi: Likewise.
* doc/c-arc.texi: Likewise.
* doc/c-arm.texi: Likewise.
* doc/c-avr.texi: Likewise.
* doc/c-bfin.texi: Likewise.
* doc/c-cris.texi: Likewise.
* doc/c-epiphany.texi: Likewise.
* doc/c-i386.texi: Likewise.
* doc/c-ia64.texi: Likewise.
* doc/c-lm32.texi: Likewise.
* doc/c-m32r.texi: Likewise.
* doc/c-m68k.texi: Likewise.
* doc/c-mips.texi: Likewise.
* doc/c-mmix.texi: Likewise.
* doc/c-msp430.texi: Likewise.
* doc/c-mt.texi: Likewise.
* doc/c-nios2.texi: Likewise.
* doc/c-ppc.texi: Likewise.
* doc/c-pru.texi: Likewise.
* doc/c-rl78.texi: Likewise.
* doc/c-rx.texi: Likewise.
* doc/c-tic6x.texi: Likewise.
* doc/c-v850.texi: Likewise.
* doc/c-vax.texi: Likewise.
* doc/c-visium.texi: Likewise.
* doc/c-xstormy16.texi: Likewise.
* doc/c-xtensa.texi: Likewise.
* doc/c-z80.texi: Likewise.
* doc/c-z8k.texi: Likewise.
* doc/internals.texi: Likewise.
gprof/
* gprof.texi: Use command-line consistently when used in a compount
word.
ld/
* NEWS: Use command-line consistently when used in a compount word.
* ld.texinfo: Likewise.
* ldint.texinfo: Likewise.
|
|
|
|
include/
* opcode/ppc.h:
(spe2_opcodes, spe2_num_opcodes): New.
(PPC_OPCODE_SPE2): New define.
(PPC_OPCODE_EFS2): Likewise.
(SPE2_XOP): Likewise.
(SPE2_XOP_TO_SEG): Likewise.
opcodes/
* ppc-dis.c (ppc_mopt): Add PPC_OPCODE_SPE2 and
PPC_OPCODE_EFS2 flag to "e200z4" entry.
New entries efs2 and spe2.
Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "vle" entry.
(SPE2_OPCD_SEGS): New macro.
(spe2_opcd_indices): New.
(disassemble_init_powerpc): Handle SPE2 opcodes.
(lookup_spe2): New function.
(print_insn_powerpc): call lookup_spe2.
* ppc-opc.c (insert_evuimm1_ex0): New function.
(extract_evuimm1_ex0): Likewise.
(insert_evuimm_lt8): Likewise.
(extract_evuimm_lt8): Likewise.
(insert_off_spe2): Likewise.
(extract_off_spe2): Likewise.
(insert_Ddd): Likewise.
(extract_Ddd): Likewise.
(DD): New operand.
(EVUIMM_LT8): Likewise.
(EVUIMM_LT16): Adjust.
(MMMM): New operand.
(EVUIMM_1): Likewise.
(EVUIMM_1_EX0): Likewise.
(EVUIMM_2): Adjust.
(NNN): New operand.
(VX_OFF_SPE2): Likewise.
(BBB): Likewise.
(DDD): Likewise.
(VX_MASK_DDD): New mask.
(HH): New operand.
(VX_RA_CONST): New macro.
(VX_RA_CONST_MASK): Likewise.
(VX_RB_CONST): Likewise.
(VX_RB_CONST_MASK): Likewise.
(VX_OFF_SPE2_MASK): Likewise.
(VX_SPE_CRFD): Likewise.
(VX_SPE_CRFD_MASK VX): Likewise.
(VX_SPE2_CLR): Likewise.
(VX_SPE2_CLR_MASK): Likewise.
(VX_SPE2_SPLATB): Likewise.
(VX_SPE2_SPLATB_MASK): Likewise.
(VX_SPE2_OCTET): Likewise.
(VX_SPE2_OCTET_MASK): Likewise.
(VX_SPE2_DDHH): Likewise.
(VX_SPE2_DDHH_MASK): Likewise.
(VX_SPE2_HH): Likewise.
(VX_SPE2_HH_MASK): Likewise.
(VX_SPE2_EVMAR): Likewise.
(VX_SPE2_EVMAR_MASK): Likewise.
(PPCSPE2): Likewise.
(PPCEFS2): Likewise.
(vle_opcodes): Add EFS2 and some missing SPE opcodes.
(powerpc_macros): Map old SPE instructions have new names
with the same opcodes. Add SPE2 instructions which just are
mapped to SPE2.
(spe2_opcodes): Add SPE2 opcodes.
gas/
* config/tc-ppc.c:
(md_parse_option): Add mspe2 switch.
(md_show_usage): Document -mspe2.
(ppc_setup_opcodes): Handle spe2_opcodes.
* doc/as.texinfo: Document -mspe2.
* doc/c-ppc.texi: Likewise.
* testsuite/gas/ppc/efs.d: New file.
* testsuite/gas/ppc/efs.s: Likewise.
* testsuite/gas/ppc/efs2.d: Likewise.
* testsuite/gas/ppc/efs2.s: Likewise.
* testsuite/gas/ppc/ppc.exp: Run new tests.
* testsuite/gas/ppc/spe.d: New file.
* testsuite/gas/ppc/spe.s: Likewise.
* testsuite/gas/ppc/spe2-checks.d: Likewise.
* testsuite/gas/ppc/spe2-checks.l: Likewise.
* testsuite/gas/ppc/spe2-checks.s: Likewise.
* testsuite/gas/ppc/spe2.d: Likewise.
* testsuite/gas/ppc/spe2.s: Likewise.
* testsuite/gas/ppc/spe_ambiguous.d: Likewise.
* testsuite/gas/ppc/spe_ambiguous.s: Likewise.
|
|
|
|
|
|
include/opcode/
* ppc.h (PPC_OPCODE_POWER9): New define.
(PPC_OPCODE_VSX3): Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power9" and "pwr9" entries.
Add PPC_OPCODE_VSX3 to the vsx entry.
(powerpc_init_dialect): Set default dialect to power9.
* ppc-opc.c (insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd,
insert_dxdn, extract_dxdn, insert_l0, extract_l0, insert_l1,
extract_l1 insert_xtq6, extract_xtq6): New static functions.
(insert_esync): Test for illegal L operand value.
(DCMX, DCMXS, DXD, NDXD, L0, L1, RC, FC, UIM6, X_R, RIC, PRS, XSQ6,
XTQ6, LRAND, IMM8, DQX, DQX_MASK, DX, DX_MASK, VXVAPS_MASK, VXVA,XVA,
XX2VA, XVARC, XBF_MASK, XX2UIM4_MASK, XX2BFD_MASK, XX2DCMXS_MASK,
XVA_MASK, XRLA_MASK, XBFRARB_MASK, XLRAND_MASK, POWER9, PPCVEC3,
PPCVSX3): New defines.
(powerpc_opcodes) <ps_cmpu0, ps_cmpo0, ps_cmpu1, ps_cmpo1, fcmpu,
fcmpo, ftdiv, ftsqrt>: Use XBF_MASK.
<mcrxr>: Use XBFRARB_MASK.
<addpcis, bcdcfn., bcdcfsq., bcdcfz., bcdcpsgn., bcdctn., bcdctsq.,
bcdctz., bcds., bcdsetsgn., bcdsr., bcdtrunc., bcdus., bcdutrunc.,
cmpeqb, cmprb, cnttzd, cnttzd., cnttzw, cnttzw., copy, copy_first,
cp_abort, darn, dtstsfi, dtstsfiq, extswsli, extswsli., ldat, ldmx,
lwat, lxsd, lxsibzx, lxsihzx, lxssp, lxv, lxvb16x, lxvh8x, lxvl, lxvll,
lxvwsx, lxvx, maddhd, maddhdu, maddld, mcrxrx, mfvsrld, modsd, modsw,
modud, moduw, msgsync, mtvsrdd, mtvsrws, paste, paste., paste_last,
rmieg, setb, slbieg, slbsync, stdat, stop, stwat, stxsd, stxsibx,
stxsihx, stxssp, stxv, stxvb16x, stxvh8x, stxvl, stxvll, stxvx,
subpcis, urfid, vbpermd, vclzlsbb, vcmpneb, vcmpneb., vcmpneh,
vcmpneh., vcmpnew, vcmpnew., vcmpnezb, vcmpnezb., vcmpnezh, vcmpnezh.,
vcmpnezw, vcmpnezw., vctzb, vctzd, vctzh, vctzlsbb, vctzw, vextractd,
vextractub, vextractuh, vextractuw, vextsb2d, vextsb2w, vextsh2d,
vextsh2w, vextsw2d, vextublx, vextubrx, vextuhlx, vextuhrx, vextuwlx,
vextuwrx, vinsertb, vinsertd, vinserth, vinsertw, vmul10cuq,
vmul10ecuq, vmul10euq, vmul10uq, vnegd, vnegw, vpermr, vprtybd,
vprtybq, vprtybw, vrldmi, vrldnm, vrlwmi, vrlwnm, vslv, vsrv, wait,
xsabsqp, xsaddqp, xsaddqpo, xscmpeqdp, xscmpexpdp, xscmpexpqp,
xscmpgedp, xscmpgtdp, xscmpnedp, xscmpoqp, xscmpuqp, xscpsgnqp,
xscvdphp, xscvdpqp, xscvhpdp, xscvqpdp, xscvqpdpo, xscvqpsdz,
xscvqpswz, xscvqpudz, xscvqpuwz, xscvsdqp, xscvudqp, xsdivqp,
xsdivqpo, xsiexpdp, xsiexpqp, xsmaddqp, xsmaddqpo, xsmaxcdp,
xsmaxjdp, xsmincdp, xsminjdp, xsmsubqp, xsmsubqpo, xsmulqp, xsmulqpo,
xsnabsqp, xsnegqp, xsnmaddqp, xsnmaddqpo, xsnmsubqp, xsnmsubqpo,
xsrqpi, xsrqpix, xsrqpxp, xssqrtqp, xssqrtqpo, xssubqp, xssubqpo,
xststdcdp, xststdcqp, xststdcsp, xsxexpdp, xsxexpqp, xsxsigdp,
xsxsigqp, xvcmpnedp, xvcmpnedp., xvcmpnesp, xvcmpnesp., xvcvhpsp,
xvcvsphp, xviexpdp, xviexpsp, xvtstdcdp, xvtstdcsp, xvxexpdp,
xvxexpsp, xvxsigdp, xvxsigsp, xxbrd, xxbrh, xxbrq, xxbrw, xxextractuw,
xxinsertw, xxperm, xxpermr, xxspltib>: New instructions.
<doze, nap, sleep, rvwinkle, waitasec, lxvx, stxvx>: Disable on POWER9.
<tlbiel, tlbie, sync, slbmfev, slbmfee>: Add additional operands.
include/elf/
* ppc.h (R_PPC_REL16DX_HA): New reloction.
* ppc64.h (R_PPC64_REL16DX_HA): Likewise.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw): Add R_PPC_REL16DX_HA.
(ppc_elf_reloc_type_lookup): Handle R_PPC_REL16DX_HA.
(ppc_elf_addr16_ha_reloc): Likewise.
(ppc_elf_check_relocs): Likewise.
(ppc_elf_relocate_section): Likewise.
(is_insn_dq_form): Handle lxv and stxv instructions.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_REL16DX_HA.
(ppc64_elf_reloc_type_lookup): Handle R_PPC64_REL16DX_HA.
(ppc64_elf_ha_reloc): Likewise.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
* reloc.c (BFD_RELOC_PPC_REL16DX_HA): New.
elfcpp/
* powerpc.h (R_POWERPC_REL16DX_HA): Define.
gas/
* doc/as.texinfo (Target PowerPC): Document -mpower9 and -mpwr9.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* config/tc-ppc.c (md_show_usage): Likewise.
(md_assemble): Handle BFD_RELOC_PPC_REL16DX_HA.
(md_apply_fix): Likewise.
(ppc_handle_align): Handle power9's group ending nop.
gas/testsuite/
* gas/ppc/altivec3.s: New test.
* gas/ppc/altivec3.d: Likewise.
* gas/ppc/vsx3.s: Likewise.
* gas/ppc/vsx3.d: Likewise.
* gas/ppc/power9.s: Likewise.
* gas/ppc/power9.d: Likewise.
* gas/ppc/ppc.exp: Run them.
* gas/ppc/power8.s <lxvx, lxvd2x, stxvx, stxvd2x>: Add new tests.
* gas/ppc/power8.d: Likewise.
* gas/ppc/vsx.s: <lxvx, stxvx>: Rename invalid mnemonics ...
<lxvd2x, stxvd2x>: ...to this.
* gas/ppc/vsx.d: Likewise.
gold/
* gold/powerpc.cc (Powerpc_relocate_functions::addr16_dq): New function.
(Powerpc_relocate_functions::addr16dx_ha): Likewise.
(Target_powerpc::Scan::local): Handle R_POWERPC_REL16DX_HA.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
ld/testsuite/
* ld-powerpc/addpcis.d: New test.
* ld-powerpc/addpcis.s: New test.
* ld-powerpc/powerpc.exp: Run it.
|
|
Back in the day support for these processors was added, we probably
didn't want to waste PPC_OPCODE bits on minor variations. I've had a
complaint that disassembly of mfspr/mtspr was wrong for power8. This
patch fixes that problem.
Note that since -m860/-m850/-m821 are new gas options enabling the
mpc8xx specific mfspr/mtspr variants it is possible that this change
will break some mpc8xx assembly code. ie. you might need to modify
makefiles to pass -m860 to gas.
include/opcode/
* ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define.
opcodes/
* ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
* ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add
PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry.
gas/
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
|
|
|
|
|
|
* ppc.h (PPC_OPCODE_POWER8): New define.
(PPC_OPCODE_HTM): Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power8", "pwr8" and "htm" entries.
* ppc-opc.c (HTM_R, HTM_SI, XRTRB_MASK, XRTRARB_MASK, XRTLRARB_MASK,
XRTARARB_MASK, XRTBFRARB_MASK, XRCL, POWER8, PPCHTM): New defines.
(SH6): Update.
<"tabort.", "tabortdc.", "tabortdci.", "tabortwc.",
"tabortwci.", "tbegin.", "tcheck", "tend.", "trechkpt.",
"treclaim.", "tsr.">: Add POWER8 HTM opcodes.
<"tendall.", "tresume.", "tsuspend.">: Add POWER8 HTM extended opcodes.
gas/
* doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* config/tc-ppc.c (md_show_usage): Likewise.
(ppc_handle_align): Handle power8's group ending nop.
gas/testsuite/
* gas/ppc/htm.d: New test.
* gas/ppc/htm.s: Likewise.
* gas/ppc/power8.d: Likewise.
* gas/ppc/power8.s: Likewise.
* gas/ppc/ppc.exp: Run them.
|
|
This was missing from the initial VLE port commit.
Committed as obvious / trivial.
|
|
* ppc.h: Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR.
opcodes/
* ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
* ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
(PPCVEC2, PPCTMR, E6500): New short names.
(powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
optional operands on sync instruction for E6500 target.
bfd/
* archures.c: Add bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entryies for
bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
gas/
* config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
(ppc_handle_align): Add termination nop opcode for e500mc family.
* doc/as.texinfo: Document options -me5500 and -me6500.
* doc/c-ppc.texi: Likewise.
gas/testsuite/
* gas/ppc/e500mc64_nop.s: New test case for e500mc family
termination nops.
* gas/ppc/e500mc64_nop.d: Likewise.
* gas/ppc/e5500_nop.s: Likewise.
* gas/ppc/e5500_nop.d: Likewise.
* gas/ppc/e6500_nop.s: Likewise.
* gas/ppc/e6500_nop.d: Likewise.
* gas/ppc/e6500.s: New.
* gas/ppc/e6500.d: Likewise.
* gas/ppc/ppc.exp: Run e6500, e500mc64_nop, e5500_nop, and e6500_nop.
|
|
|
|
* doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
(Overview <Target PowerPC options>): Add a number of missing options.
* doc/c-ppc.texi: Likewise. Add markup for use in manpage generation.
|
|
* doc/all.texi: Add NS32K
* doc/as.texinfo: Remove target specific details of which
characters act as comment initiators and statement separators into
individual target specific files.
* doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
the hash character at the start of a line.
* doc/c-arm.texi (ARM-Chars): Likewise.
* doc/c-avr.texi (AVR-Chars): Likewise.
* doc/c-d10v.texi (D10V-Chars): Likewise.
* doc/c-d30v.texi (D30V-Chars): Likewise.
* doc/c-mmix.texi (MMIX-Chars): Likewise.
* doc/c-s390.texi (s390 characters): Likewise.
* doc/c-sh.texi (SH-Chars): Likewise.
* doc/c-sh64.texi (SH64-Chars): Likewise.
* doc/c-sparc.texi (SPARC-Chars): Likewise.
* doc/c-tic6x.texi (TIC6X Syntax): Likewise.
* doc/c-xtensa.texi (Xtensa Syntax): Likewise.
* doc/c-z80.texi (Z80-Chars): Likewise.
* doc/c-z8k.texi (Z8000-Chars): Likewise.
* doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
* doc/c-arc.texi (ARC-Chars): Fill in this subsection.
* doc/c-bfin.texi (Blackfin Syntax): Document line comment and
line separator characters.
* doc/c-cr16.texi (CR16 Syntax): Likewise.
* doc/c-i386.texi (i386-Chars): Likewise.
* doc/c-i860.texi (i860-Chars): Likewise.
* doc/c-i960.texi (i960-Chars): Likewise.
* doc/c-ip2k.texi (IP2K-Chars): Likewise.
* doc/c-lm32.texi (LM32-Chars): likewise.
* doc/c-m32c.texi (M32C-Chars): Likewise.
* doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
* doc/c-m68k.texi (M68K-Chars): Likewise.
* doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
* doc/c-msp430.texi (MSP430-Chars): Likewise.
* doc/c-mt.texi (MT-Chars): Likewise.
* doc/c-ns32k.texi (NS32K-Chars): Likewise.
* doc/c-pj.texi (PJ-Chars): Likewise.
* doc/c-ppc.texi (PowerPC-Chars): Likewise.
* doc/c-rx.texi (RX-Chars): Likewise.
* doc/c-score.texi (SCORE-Chars): Likewise.
* doc/c-tic54x.texi (TIC54X-Chars): Likewise.
* doc/c-v850.texi (V850-Chars): Likewise.
* doc/c-vax.texi (VAX-Chars): Likewise.
* doc/c-xc16x.texi (xc16x-Chars): Likewise.
|
|
* opcode/ppc.h (PPC_OPCODE_TITAN): Define.
bfd/
* archures.c (bfd_mach_ppc_titan): Define.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add titan entry.
opcodes/
* ppc-dis.c (ppc_opts): Add titan entry.
* ppc-opc.c (TITAN, MULHW): Define.
(powerpc_opcodes): Support AppliedMicro Titan core (APM83xxx).
gas/
* config/tc-ppc.c (md_show_usage): Mention -mtitan. Don't use tabs.
(ppc_mach): Handle titan.
* doc/c-ppc.texi: Mention -mtitan.
gas/testsuite/
* gas/ppc/titan.d, * gas/ppc/titan.s: New test.
* gas/ppc/ppc.exp: Run it.
|
|
* config/tc-ppc.c (md_show_usage): Document -m476.
* doc/c-ppc.texi (PowerPC-Opts): Document -m476.
gas/testsuite/
* gas/ppc/476.s: New test.
* gas/ppc/476.d: Likewise.
* gas/ppc/ppc.exp: Run the 476 test.
include/opcode/
* ppc.h (PPC_OPCODE_476): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "476" entry.
* ppc-opc.c (PPC476): Define.
(powerpc_opcodes): Update mnemonics where required for 476.
|
|
* config/tc-ppc.c (md_show_usage): Rename "ppca2" to "a2".
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/a2.d: Rename "ppca2" to "a2".
include/opcode/
* ppc.h (PPC_OPCODE_A2): Rename from PPC_OPCODE_PPCA2.
opcodes/
* ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
* ppc-dis.c (ppc_opts): Likewise.
Rename "ppca2" to "a2".
|
|
* config/tc-ppc.c (md_show_usage): Document -mpcca2.
* doc/c-ppc.texi (PowerPC-Opts): Document -mppca2.
gas/testsuite/
* gas/ppc/a2.s: New.
* gas/ppc/a2.d: Likewise.
* gas/ppc/ppc.exp: Run the a2 dump test.
include/opcode/
* ppc.h (PPC_OPCODE_PPCA2): New.
opcodes/
* ppc-dis.c (ppc_opts): Add "ppca2" entry.
* ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
ici mnemonics.
(ERAT_T): New operand.
(XWC_MASK): New mask.
(XOPL2): New macro.
(PPCA2): Define.
|
|
|
|
* ppc-dis.c (powerpc_init_dialect): Do not set PPC_OPCODE_BOOKE
for -Mbooke.
(print_ppc_disassembler_options): Update usage.
* ppc-opc.c (DE, DES, DEO, DE_MASK): Remove.
(BOOKE64): Remove.
(PPCCHLK64): Likewise.
(powerpc_opcodes): Remove all BOOKE64 instructions.
gas/
* config/tc-ppc.c (parse_cpu): Remove booke64 support. Update
usage strings.
(ppc_setup_opcodes): Likewise, remove booke64 support.
* doc/c-ppc.texi (PowerPC-Opts): Remove -mbooke32 and -mbooke64.
* doc/as.texinfo (Overview): Likewise.
binutils/
* doc/binutils.texi (objdump): Update booke documentation.
* NEWS: Document user-visible changes to command line options.
|
|
* config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
Handle -mvsx and -mpower7.
(md_show_usage): Document -mpower7 and -mvsx.
* doc/as.texinfo (Target PowerPC): Document -mvsx.
* doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
gas/testsuite/
* gas/ppc/power7.d: New.
* gas/ppc/power7.s: Likewise.
* gas/ppc/ppc.exp: Run power7 test.
include/opcode/
* ppc.h (PPC_OPCODE_VSX, PPC_OPERAND_VSR): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
* ppc-opc.c (insert_xt6): New static function.
(extract_xt6): Likewise.
(insert_xa6): Likewise.
(extract_xa6: Likewise.
(insert_xb6): Likewise.
(extract_xb6): Likewise.
(insert_xb6s): Likewise.
(extract_xb6s): Likewise.
(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
XX3DM_MASK, PPCVSX): New.
(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".
|
|
* doc/binutils.texi (objdump): Document -Mppcps.
gas/
* config/tc-ppc.c (parse_cpu): Handle "750cl".
(pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
(md_show_usage): Document -m750cl.
(md_assemble): Handle two delimiters in succession (eg. `),').
* doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
* testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
* testsuite/gas/ppc/ppc750ps.s: New file.
* testsuite/gas/ppc/ppc750ps.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_PPCPS): New.
opcodes/
* ppc-opc.c (PSW, PSWM, PSQ, PSQM, PSD, MTMSRD_L): New.
(XOPS, XOPS_MASK, XW, XW_MASK): Likewise.
(PPCPS): Likewise.
(powerpc_opcodes): Add all pair singles instructions.
* ppc-dis.c (powerpc_dialect): Handle "ppcps".
(print_ppc_disassembler_options): Document -Mppcps.
|
|
|
|
|
|
|
|
* ppc.h (PPC_OPCODE_POWER6): Define.
Adjust whitespace.
gas/
* config/tc-ppc.c (parse_cpu): Handle "-mpower6".
(md_show_usage): Document it.
(ppc_setup_opcodes): Test power6 opcode flag bits.
* doc/c-ppc.texi (PowerPC-Opts): Document "-mpower6".
opcodes/
* ppc-dis.c (powerpc_dialect): Handle power6 option.
(print_ppc_disassembler_options): Mention power6.
|
|
* config/tc-ppc.c (parse_cpu): Add -me300 support.
(md_show_usage): Likewise.
* doc/c-ppc.texi (PowerPC-Opts): Document it.
include/opcode/
* ppc.h (PPC_OPCODE_E300): Define.
opcodes/
* ppc-dis.c (powerpc_dialect): Handle e300.
(print_ppc_disassembler_options): Likewise.
* ppc-opc.c (PPCE300): Define.
(powerpc_opcodes): Mark icbt as available for the e300.
binutils/
* doc/binutils.texi (objdump): Document -M e300.
|
|
(md_show_usage): Document it.
(ppc_setup_opcodes): Insert POWER5 mnemonics.
* doc/c-ppc.texi (PowerPC-Opts): Document "-mpower5".
|
|
|
|
|
|
(md_apply_fix3): Warning fix.
(md_show_usage): Add -m440.
* doc/c-ppc.texi: Document -m440.
|
|
Remove references to chip manufacturers.
* config/tc-ppc.c (md_parse_option): Handle -mpower4 option.
Correct comments.
(md_show_usage): Remove references to chip manufacturers. Mention
-mpower4.
(md_begin): Test power4 opcode flag bits.
|
|
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
|
