aboutsummaryrefslogtreecommitdiff
path: root/gas/doc/as.texinfo
AgeCommit message (Collapse)AuthorFilesLines
2017-10-20Improve handling of REPT pseudo op with a negative count.Nick Clifton1-0/+3
PR 22324 * read.c (s_rept): Use size_t type for count parameter. (do_repeat): Change type of count parameter to size_t. Issue an error is the count parameter is negative. (do_repeat_with_expression): Likewise. * read.h: Update prototypes for do_repeat and do_repeat_with_expression. * doc/as.texinfo (Rept): Document that a zero count is allowed but negative counts are not. * config/tc-rx.c (rx_rept): Use size_t type for count parameter. * config/tc-tic54x.c (tic54x_loop): Cast count parameter to size_t type. * testsuite/gas/macros/end.s: Add a test using a negative repeat count. * testsuite/gas/macros/end.l: Add expected error message.
2017-08-24[PowerPC VLE] Add SPE2 and EFS2 instructions supportAlexander Fedotov1-1/+1
include/ * opcode/ppc.h: (spe2_opcodes, spe2_num_opcodes): New. (PPC_OPCODE_SPE2): New define. (PPC_OPCODE_EFS2): Likewise. (SPE2_XOP): Likewise. (SPE2_XOP_TO_SEG): Likewise. opcodes/ * ppc-dis.c (ppc_mopt): Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "e200z4" entry. New entries efs2 and spe2. Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "vle" entry. (SPE2_OPCD_SEGS): New macro. (spe2_opcd_indices): New. (disassemble_init_powerpc): Handle SPE2 opcodes. (lookup_spe2): New function. (print_insn_powerpc): call lookup_spe2. * ppc-opc.c (insert_evuimm1_ex0): New function. (extract_evuimm1_ex0): Likewise. (insert_evuimm_lt8): Likewise. (extract_evuimm_lt8): Likewise. (insert_off_spe2): Likewise. (extract_off_spe2): Likewise. (insert_Ddd): Likewise. (extract_Ddd): Likewise. (DD): New operand. (EVUIMM_LT8): Likewise. (EVUIMM_LT16): Adjust. (MMMM): New operand. (EVUIMM_1): Likewise. (EVUIMM_1_EX0): Likewise. (EVUIMM_2): Adjust. (NNN): New operand. (VX_OFF_SPE2): Likewise. (BBB): Likewise. (DDD): Likewise. (VX_MASK_DDD): New mask. (HH): New operand. (VX_RA_CONST): New macro. (VX_RA_CONST_MASK): Likewise. (VX_RB_CONST): Likewise. (VX_RB_CONST_MASK): Likewise. (VX_OFF_SPE2_MASK): Likewise. (VX_SPE_CRFD): Likewise. (VX_SPE_CRFD_MASK VX): Likewise. (VX_SPE2_CLR): Likewise. (VX_SPE2_CLR_MASK): Likewise. (VX_SPE2_SPLATB): Likewise. (VX_SPE2_SPLATB_MASK): Likewise. (VX_SPE2_OCTET): Likewise. (VX_SPE2_OCTET_MASK): Likewise. (VX_SPE2_DDHH): Likewise. (VX_SPE2_DDHH_MASK): Likewise. (VX_SPE2_HH): Likewise. (VX_SPE2_HH_MASK): Likewise. (VX_SPE2_EVMAR): Likewise. (VX_SPE2_EVMAR_MASK): Likewise. (PPCSPE2): Likewise. (PPCEFS2): Likewise. (vle_opcodes): Add EFS2 and some missing SPE opcodes. (powerpc_macros): Map old SPE instructions have new names with the same opcodes. Add SPE2 instructions which just are mapped to SPE2. (spe2_opcodes): Add SPE2 opcodes. gas/ * config/tc-ppc.c: (md_parse_option): Add mspe2 switch. (md_show_usage): Document -mspe2. (ppc_setup_opcodes): Handle spe2_opcodes. * doc/as.texinfo: Document -mspe2. * doc/c-ppc.texi: Likewise. * testsuite/gas/ppc/efs.d: New file. * testsuite/gas/ppc/efs.s: Likewise. * testsuite/gas/ppc/efs2.d: Likewise. * testsuite/gas/ppc/efs2.s: Likewise. * testsuite/gas/ppc/ppc.exp: Run new tests. * testsuite/gas/ppc/spe.d: New file. * testsuite/gas/ppc/spe.s: Likewise. * testsuite/gas/ppc/spe2-checks.d: Likewise. * testsuite/gas/ppc/spe2-checks.l: Likewise. * testsuite/gas/ppc/spe2-checks.s: Likewise. * testsuite/gas/ppc/spe2.d: Likewise. * testsuite/gas/ppc/spe2.s: Likewise. * testsuite/gas/ppc/spe_ambiguous.d: Likewise. * testsuite/gas/ppc/spe_ambiguous.s: Likewise.
2017-07-21This patch introduces support for specifing views in .loc directives, so ↵Alexandre Oliva1-0/+13
that the compiler can use the assembler to generate line number information and have the assembler determine view numbers to multiple views at the same program counter. binutils* dwarf.c (struct State_Machine_Registers): Add view field. (reset_state_machine): Reset view. (process_extended_line_op): Reset view when appropriate. (display_debug_lines_raw): Increment or reset view when appropriate. Print nonzero views. Support print view resets, disabled by default. (display_debug_lines_decoded): Likewise. Disambiguate op_code tests, enabling printing of end_sequence. * testsuite/binutils-all/dw2-1.W: Add nonzero views. * testsuite/binutils-all/dw2-3.W: Likewise. * testsuite/binutils-all/dw2-3gabi.W: Likewise. * testsuite/binutils-all/dw5.W: Add end sequence lines. * testsuite/binutils-all/i386/compressed-1a.d: Add nonzero views. * testsuite/binutils-all/libdw2-compressedgabi.out: Likewise. * testsuite/binutils-all/objdump.W: Likewise. * testsuite/binutils-all/objdump.WL: Add end sequence lines. * testsuite/binutils-all/x86-64/compressed-1a.d: Add nonzero views. gas * doc/as.texinfo (.loc): Document view support. * dwarf2dbg.c (unused): Check offset of next in struct line_entry. (current): Initialize view. (force_reset_view, view_assert_failed): New variables. (reverse_line_entry_list): New function. (set_or_check_view): Likewise. (dwarf2_gen_line_info_1): Call it. (dwarf2_where): Set view to NULL. (dwarf2_emit_insn): Return early when called before first file. (dwarf2_directive_loc): Add view support. Emit insn immediately when view option is given. (process_entries): Avoid set_address to reset view when a known address change already implies the view reset. (dwarf2dbg_final_check): New function. * dwarf2dbg.h (struct dwarf2_line_info): Add view. (dwarf2dbg_final_check): Declare. * read.c (s_leb128): Parse expression as deferred. * testsuite/gas/all/gas.exp: Run sleb128-9. * testsuite/gas/all/sleb128-9.d: New. * testsuite/gas/all/sleb128-9.l: New. * testsuite/gas/all/sleb128-9.s: New. * testsuite/gas/elf/dwarf2-1.d: Add nonzero views. * testsuite/gas/elf/dwarf2-2.d: Likewise. * testsuite/gas/elf/dwarf2-5.d: New. * testsuite/gas/elf/dwarf2-5.s: New. * testsuite/gas/elf/dwarf2-6.d: New. * testsuite/gas/elf/dwarf2-6.s: New. * testsuite/gas/elf/dwarf2-7.d: New. * testsuite/gas/elf/dwarf2-7.s: New. * testsuite/gas/elf/dwarf2-8.d: New. * testsuite/gas/elf/dwarf2-8.l: New. * testsuite/gas/elf/dwarf2-8.s: New. * testsuite/gas/elf/dwarf2-9.d: New. * testsuite/gas/elf/dwarf2-9.l: New. * testsuite/gas/elf/dwarf2-9.s: New. * testsuite/gas/elf/dwarf2-10.d: New. * testsuite/gas/elf/dwarf2-10.l: New. * testsuite/gas/elf/dwarf2-10.s: New. * testsuite/gas/elf/dwarf2-11.d: New. * testsuite/gas/elf/dwarf2-11.s: New. * testsuite/gas/elf/dwarf2-12.d: New. * testsuite/gas/elf/dwarf2-12.s: New. * testsuite/gas/elf/dwarf2-13.d: New. * testsuite/gas/elf/dwarf2-13.s: New. * testsuite/gas/elf/dwarf2-14.d: New. * testsuite/gas/elf/dwarf2-14.s: New. * testsuite/gas/elf/dwarf2-15.d: New. * testsuite/gas/elf/dwarf2-15.s: New. * testsuite/gas/elf/dwarf2-16.d: New. * testsuite/gas/elf/dwarf2-16.s: New. * testsuite/gas/elf/dwarf2-17.d: New. * testsuite/gas/elf/dwarf2-17.s: New. * testsuite/gas/elf/dwarf2-18.d: New. * testsuite/gas/elf/dwarf2-18.s: New. * testsuite/gas/elf/elf.exp: Run dwarf2-5..18 tests. * testsuite/gas/i386/dw2-compress-1.d: Add nonzero views. * testsuite/gas/i386/dw2-compressed-1.d: Likewise. * testsuite/gas/i386/ilp32/lns/lns-duplicate.d: Likewise. * testsuite/gas/lns/lns-big-delta.d: Likewise. * testsuite/gas/lns/lns-duplicate.d: Likewise. * testsuite/gas/mips/loc-swap-2.d: Likewise. * testsuite/gas/mips/loc-swap-3.d: Likewise. * testsuite/gas/mips/loc-swap.d: Likewise. * testsuite/gas/mips/micromips@loc-swap-2.d: Likewise. * testsuite/gas/mips/micromips@loc-swap.d: Likewise. * testsuite/gas/mips/mips16@loc-swap-2.d: Likewise. * testsuite/gas/mips/mips16@loc-swap.d: Likewise. * testsuite/gas/mips/mips16e@loc-swap.d: Likewise. * write.c (write_object_file): Check pending view asserts. (cvt_frag_to_fill): Complain about undefined leb128 operand.
2017-07-21S/390: Support z14 as CPU name.Andreas Krebbel1-1/+1
With IBM z14 officially announced I can add z14 as CPU name. No regressions with that patch on s390x. gas/ChangeLog: 2017-07-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * config/tc-s390.c (s390_parse_cpu): Add z14 as alternate CPU name. * doc/as.texinfo: Add z14 to CPU string list. * doc/c-s390.texi: Likewise. opcodes/ChangeLog: 2017-07-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * s390-mkopc.c (main): Enable z14 as CPU string in the opcode table.
2017-05-15MIPS16e2: Add MIPS16e2 ASE supportMaciej W. Rozycki1-0/+7
Add MIPS16e2 ASE support as per the architecture specification[1], including in particular: 1. A new ELF ASE flag to mark MIPS16e2 binaries. 2. MIPS16e2 instruction assembly support, including a relaxation update to use LUI rather than an LI/SLL instruction pair for loading the high part of 32-bit addresses. 3. MIPS16e2 instruction disassembly support, including updated rules for extended forms of instructions that are now subdecoded and therefore do not alias to the original MIPS16 ISA revision instructions even for encodings that are not valid in the MIPS16e2 instruction set. Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and `.module' pseudo-ops. Control the availability of the MT ASE subset of the MIPS16e2 instruction set with a combination of these controls and the preexisting MT ASE controls. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific Extension Technical Reference Manual", Imagination Technologies Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016 include/ * elf/mips.h (AFL_ASE_MIPS16E2): New macro. (AFL_ASE_MASK): Adjust accordingly. * opcode/mips.h: Document new operand codes defined. (mips_operand_type): Add OP_REG28 enum value. (INSN2_SHORT_ONLY): Update description. (ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros. bfd/ * elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry. (mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag. (print_insn_arg) <OP_REG28>: Add handler. (validate_insn_args) <OP_REG28>: Handle. (print_mips16_insn_arg): Handle MIPS16 instructions that require 32-bit encoding and 9-bit immediates. (print_insn_mips16): Handle MIPS16 instructions that require 32-bit encoding and MFC0/MTC0 operand decoding. * mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'> <'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers. (RD_C0, WR_C0, E2, E2MT): New macros. (mips16_opcodes): Add entries for MIPS16e2 instructions: GP-relative "addiu" and its "addu" spelling, "andi", "cache", "di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh", "lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0", "movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause", "pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw" instructions, "swl", "swr", "sync" and its "sync_acquire", "sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases, "xori", "dmt", "dvpe", "emt" and "evpe". Add split regular/extended entries for original MIPS16 ISA revision instructions whose extended forms are subdecoded in the MIPS16e2 ISA revision: "li", "sll" and "srl". binutils/ * readelf.c (print_mips_ases): Handle MIPS16e2 ASE. * NEWS: Mention MIPS16e2 ASE support. gas/ * config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag. (RELAX_MIPS16_E2): New macro. (RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO) (RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT) (RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT) (RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED) (RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED) (RELAX_MIPS16_MARK_ALWAYS_EXTENDED) (RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO) (RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits. (mips16_immed_extend): New prototype. (options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum values. (md_longopts): Add "mmips16e2" and "mno-mips16e2" options. (mips_ases): Add "mips16e2" entry. (mips_set_ase): Handle MIPS16e2 ASE. (insn_insert_operand): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (is_opcode_valid_16): Pass enabled ASE bitmask on to `opcode_is_member'. (validate_mips_insn): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (operand_reg_mask) <OP_REG28>: Add handler. (match_reg28_operand): New function. (match_operand) <OP_REG28>: Add handler. (append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE. (match_mips16_insn): Handle MIPS16 instructions that require 32-bit encoding and `V' and `u' operand codes. (mips16_ip): Allow any characters except from `.' in opcodes. (mips16_immed_extend): Handle 9-bit immediates. Do not shuffle immediates whose width is not one of these listed. (md_estimate_size_before_relax): Handle MIPS16e2 relaxation. (mips_relax_frag): Likewise. (md_convert_frag): Likewise. (mips_convert_ase_flags): Handle MIPS16e2 ASE. * doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and `-mno-mips16e2' options. (-mmips16e2, -mno-mips16e2): New options. * doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and `-mno-mips16e2' options. (MIPS ASE Instruction Generation Overrides): Add `.set mips16e2' and `.set nomips16e2'.
2017-05-15MIPS/GAS/doc: Refer to `.module' rather than `.set'Maciej W. Rozycki1-7/+7
Complement commit 919731affbef ("Add MIPS .module directive") and update the GAS manual to refer to the `.module' rather than `.set' directive in command-line option descriptions, following an observation that unlike `.set' and like the respective command-line option the use of the `.module' directive affects the ISA and ASE flags recorded in the object file produced, and therefore it is `.module' rather than `.set' that corresponds to the respective command-line option. gas/ * doc/as.texinfo (-mips16, -no-mips16): Refer to `.module mips16' rather than `.set mips16'. (-mmicromips, -mno-micromips): Refer to `.module micromips' and `.module nomicromips' rather than `.set micromips' and `.set nomicromips'. (-msmartmips, -mno-smartmips): Refer to `.module smartmips' rather than `.set smartmips'. * doc/c-mips.texi (MIPS Options): Refer to `.module mips16', `.module micromips', `.module nomicromips' and `.module smartmips' rather than `.set mips16', `.set micromips', `.set nomicromips' and `.set smartmips' respectively.
2017-04-04Support ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXXH.J. Lu1-0/+2
Mark an ALLOC section, which should be placed in special memory area, with SHF_GNU_MBIND. Its sh_info field indicates the special memory type. GNU_MBIND section names start with ".mbind" so that they are placed as orphan sections by linker. All input GNU_MBIND sections with the same sh_type, sh_flags and sh_info are placed in one output GNU_MBIND section. In executable and shared object, create a GNU_MBIND segment for each GNU_MBIND section and its segment type is PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is aligned at page boundary. The assembler syntax: .section .mbind.foo,"adx",%progbits ^ 0: Special memory type. | 'd' for SHF_GNU_MBIND. .section .mbind.foo,"adx",%progbits,0x1 ^ 1: Special memory type. | 'd' for SHF_GNU_MBIND. .section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2 ^ 2: Special memory type. | 'd' for SHF_GNU_MBIND. bfd/ * elf.c (get_program_header_size): Add a GNU_MBIND segment for each GNU_MBIND section and align GNU_MBIND section to page size. (_bfd_elf_map_sections_to_segments): Create a GNU_MBIND segment for each GNU_MBIND section. (_bfd_elf_init_private_section_data): Copy sh_info from input for GNU_MBIND section. binutils/ * NEWS: Mention support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX. (get_elf_section_flags): Handle SHF_GNU_MBIND. (process_section_headers): Likewise. * testsuite/binutils-all/mbind1.s: New file. * testsuite/binutils-all/objcopy.exp: Run readelf test on mbind1.s. gas/ * NEWS: Mention support for ELF SHF_GNU_MBIND. * config/obj-elf.c (section_match): New. (get_section): Match both sh_info and group name. (obj_elf_change_section): Add argument for sh_info. Pass both sh_info and group name to get_section. Issue an error for SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info. (obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'. (obj_elf_section): Support SHF_GNU_MBIND section info. * config/obj-elf.h (obj_elf_change_section): Add argument for sh_info. * config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to obj_elf_change_section. * config/tc-ia64.c (obj_elf_vms_common): Likewise. * config/tc-microblaze.c (microblaze_s_data): Likewise. (microblaze_s_sdata): Likewise. (microblaze_s_rdata): Likewise. (microblaze_s_bss): Likewise. * config/tc-mips.c (s_change_section): Likewise. * config/tc-msp430.c (msp430_profiler): Likewise. * config/tc-rx.c (parse_rx_section): Likewise. * config/tc-tic6x.c (tic6x_start_unwind_section): Likewise. * doc/as.texinfo: Document 'd' for SHF_GNU_MBIND. * testsuite/gas/elf/elf.exp: Run section12a, section12b and section13. * testsuite/gas/elf/section10.d: Updated. * testsuite/gas/elf/section10.s: Likewise. * testsuite/gas/elf/section12.s: New file. * testsuite/gas/elf/section12a.d: Likewise. * testsuite/gas/elf/section12b.d: Likewise. * testsuite/gas/elf/section13.l: Likewise. * testsuite/gas/elf/section13.d: Likewise. * testsuite/gas/elf/section13.s: Likewise. include/ * elf/common.h (PT_GNU_MBIND_NUM): New. (PT_GNU_MBIND_LO): Likewise. (PT_GNU_MBIND_HI): Likewise. (SHF_GNU_MBIND): Likewise. ld/ * NEWS: Mention support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place input GNU_MBIND sections with the same type, attributes and sh_info field into a single output GNU_MBIND section. * testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b. * testsuite/ld-elf/mbind1.s: New file. * testsuite/ld-elf/mbind1a.d: Likewise. * testsuite/ld-elf/mbind1b.d: Likewise. * testsuite/ld-elf/mbind1c.d: Likewise. * testsuite/ld-elf/mbind2a.s: Likewise. * testsuite/ld-elf/mbind2b.c: Likewise.
2017-03-30Add support for the WebAssembly file format and the wasm32 ELF conversion to ↵Pip Cet1-1/+8
gas and the binutils. binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_none_reloc_): Likewise. * NEWS: Mention the new support. * testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32 as ELF target. (supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE. * testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations. * testsuite/binutils-all/wasm32: New directory. * testsuite/binutils-all/wasm32/create-wasm.d: New file. * testsuite/binutils-all/wasm32/create-wasm.s: Likewise. * testsuite/binutils-all/wasm32/custom-section.d: Likewise. * testsuite/binutils-all/wasm32/custom-section.s: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise. * testsuite/binutils-all/wasm32/long-sections.d: Likewise. * testsuite/binutils-all/wasm32/long-sections.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise. * testsuite/binutils-all/wasm32/prepared-section.d: Likewise. * testsuite/binutils-all/wasm32/prepared-section.s: Likewise. * testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests. gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target. * config/tc-wasm32.c: New file: Add WebAssembly assembler target. * Makefile.am: Add WebAssembly assembler target. * configure.tgt: Add WebAssembly assembler target. * doc/c-wasm32.texi: New file: Start documenting WebAssembly assembler. * doc/all.texi: Define WASM32. * doc/as.texinfo: Add WebAssembly entries. * NEWS: Mention the new support. * Makefile.in: Regenerate. * po/gas.pot: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/wasm32: New directory. * testsuite/gas/wasm32/allinsn.d: New file. * testsuite/gas/wasm32/allinsn.s: New file. * testsuite/gas/wasm32/illegal.l: New file. * testsuite/gas/wasm32/illegal.s: New file. * testsuite/gas/wasm32/illegal-2.l: New file. * testsuite/gas/wasm32/illegal-2.s: New file. * testsuite/gas/wasm32/illegal-3.l: New file. * testsuite/gas/wasm32/illegal-3.s: New file. * testsuite/gas/wasm32/illegal-4.l: New file. * testsuite/gas/wasm32/illegal-4.s: New file. * testsuite/gas/wasm32/illegal-5.l: New file. * testsuite/gas/wasm32/illegal-5.s: New file. * testsuite/gas/wasm32/illegal-6.l: New file. * testsuite/gas/wasm32/illegal-6.s: New file. * testsuite/gas/wasm32/illegal-7.l: New file. * testsuite/gas/wasm32/illegal-7.s: New file. * testsuite/gas/wasm32/illegal-8.l: New file. * testsuite/gas/wasm32/illegal-8.s: New file. * testsuite/gas/wasm32/illegal-9.l: New file. * testsuite/gas/wasm32/illegal-9.s: New file. * testsuite/gas/wasm32/illegal-10.l: New file. * testsuite/gas/wasm32/illegal-10.s: New file. * testsuite/gas/wasm32/illegal-11.l: New file. * testsuite/gas/wasm32/illegal-11.s: New file. * testsuite/gas/wasm32/illegal-12.l: New file. * testsuite/gas/wasm32/illegal-12.s: New file. * testsuite/gas/wasm32/illegal-13.l: New file. * testsuite/gas/wasm32/illegal-13.s: New file. * testsuite/gas/wasm32/illegal-14.l: New file. * testsuite/gas/wasm32/illegal-14.s: New file. * testsuite/gas/wasm32/illegal-15.l: New file. * testsuite/gas/wasm32/illegal-15.s: New file. * testsuite/gas/wasm32/illegal-16.l: New file. * testsuite/gas/wasm32/illegal-16.s: New file. * testsuite/gas/wasm32/illegal-17.l: New file. * testsuite/gas/wasm32/illegal-17.s: New file. * testsuite/gas/wasm32/illegal-18.l: New file. * testsuite/gas/wasm32/illegal-18.s: New file. * testsuite/gas/wasm32/illegal-19.l: New file. * testsuite/gas/wasm32/illegal-19.s: New file. * testsuite/gas/wasm32/illegal-20.l: New file. * testsuite/gas/wasm32/illegal-20.s: New file. * testsuite/gas/wasm32/illegal-21.l: New file. * testsuite/gas/wasm32/illegal-21.s: New file. * testsuite/gas/wasm32/illegal-22.l: New file. * testsuite/gas/wasm32/illegal-22.s: New file. * testsuite/gas/wasm32/illegal-24.l: New file. * testsuite/gas/wasm32/illegal-24.s: New file. * testsuite/gas/wasm32/illegal-25.l: New file. * testsuite/gas/wasm32/illegal-25.s: New file. * testsuite/gas/wasm32/reloc.d: New file. * testsuite/gas/wasm32/reloc.s: New file. * testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly architecture. opcodes * configure.ac: Add (empty) bfd_wasm32_arch target. * configure: Regenerate * po/opcodes.pot: Regenerate. include * opcode/wasm.h: New file to support wasm32 architecture. * elf/wasm32.h: Add R_WASM32_32 relocation. bfd * elf32-wasm32.c: Add relocation code, two relocs. * reloc.c: Add wasm32 relocations. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. * bfd/po/bfd.pot: Regenerate.
2017-03-20Update descriptions of the .2byte, .4byte and .8byte directives.Nick Clifton1-14/+18
* doc/as.texinfo (2byte): Note that if no expressions are present the directive does nothing. Emphasize that the output is unaligned, and that this can have an effect on the relocations generated. (4byte): Simplify description. Refer back to the 2byte description. (8byte): Likewise.
2017-03-10Document that the .2byte and .4byte directives warn about overlarge values.Nick Clifton1-10/+15
* doc/as.texinfo (2byte): Tidy up wording. Add note that overlarge values will produce a warning message and be trunacted. (4byte): Likewise.
2017-03-07Correct @section placement for makeinfo 4.13Alan Modra1-3/+3
* doc/as.texinfo (2byte, 4byte, 8byte): Correct @section placement.
2017-03-07Document .Nbyte assembler directivesAlan Modra1-0/+38
* doc/as.texinfo (2byte, 4byte, 8byte): Document. * doc/c-arm.texi (2byte, 4byte, 8byte): Omit if ELF.
2017-02-23S/390: Add support for new cpu architecture - arch12.Andreas Krebbel1-1/+1
This adds support of new instructions to the S/390 specific parts. The important feature of the new instruction set is the support of single and extended precision floating point vector operations. Note: arch12 is NOT the official name of the new CPU. It just continues the series of archXX options supported as alternate names. The archXX terminology refers to the edition number of the Principle of Operations manual. The official CPU name will be added later while keeping support of the arch12 for backwards compatibility. No testsuite regressions. Committed to mainline. Bye, -Andreas- opcodes/ChangeLog: 2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * s390-mkopc.c (main): Accept arch12 as cpu string and vx2 as facility. * s390-opc.c: Add new operand description macros, new instruction types, instruction masks, and new .insn instruction types. * s390-opc.txt: Add new arch12 instructions. include/ChangeLog: 2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * opcode/s390.h (enum s390_opcode_cpu_val): New value S390_OPCODE_ARCH12. (S390_INSTR_FLAG_VX2): New macro definition. gas/ChangeLog: 2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * config/tc-s390.c (s390_parse_cpu): New entry for arch12. * doc/as.texinfo: Document arch12 as cpu type. * doc/c-s390.texi: Likewise. * testsuite/gas/s390/s390.exp: Run arch12 specific tests. * testsuite/gas/s390/zarch-arch12.d: New test. * testsuite/gas/s390/zarch-arch12.s: New test. * testsuite/gas/s390/zarch-z13.d: Rename some mnemonics in the output patterns.
2017-02-02MIPS/GAS/doc: Include MIPS options in the man pageMaciej W. Rozycki1-0/+2
Include the detailed MIPS option description in the man page along with other target descriptions and complementing the terse list earlier on. gas/ * doc/as.texinfo (Overview): Select MIPS options for man page inclusion.
2017-01-30MIPS: Add options to control branch ISA checksMaciej W. Rozycki1-0/+12
Complement commit 9d862524f6ae ("MIPS: Verify the ISA mode and alignment of branch and jump targets") and add GAS and LD options to control the checks for invalid branches between ISA modes introduced there, to help with some handwritten code lacking `.insn' annotation for labels used as branch targets and code produced by older versions of GCC which suffers from the issue with branches to code that has been optimized away, addressed with GCC commit 242424 ("MIPS/GCC: Mark trailing labels with `.insn'"), <https://gcc.gnu.org/ml/gcc-patches/2016-11/msg01061.html>. bfd/ * elfxx-mips.h (_bfd_mips_elf_insn32): Rename prototype to... (_bfd_mips_elf_linker_flags): ... this. Add another parameter. * elfxx-mips.c (mips_elf_link_hash_table): Add `ignore_branch_isa' member. (mips_elf_perform_relocation): Do not treat an ISA mode mismatch in branch relocation calculation as an error if `ignore_branch_isa' has been set. (_bfd_mips_elf_insn32): Rename to... (_bfd_mips_elf_linker_flags): ... this. Rename the `on' parameter to `insn32' and add an `ignore_branch_isa' parameter. Handle the new parameter. gas/ * config/tc-mips.c (mips_ignore_branch_isa): New variable. (options): Add OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA enum values. (md_longopts): Add "mignore-branch-isa" and "mno-ignore-branch-isa" options. (md_parse_option): Handle OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA. (fix_bad_cross_mode_branch_p): Return FALSE if `mips_ignore_branch_isa' has been set. (md_show_usage): Add `-mignore-branch-isa' and `-mno-ignore-branch-isa'. * doc/as.texinfo (Target MIPS options): Add `-mignore-branch-isa' and `-mno-ignore-branch-isa' options. (-mignore-branch-isa, -mno-ignore-branch-isa): New options. * doc/c-mips.texi (MIPS Options): Add `-mignore-branch-isa' and `-mno-ignore-branch-isa' options. * testsuite/gas/mips/branch-local-ignore-2.d: New test. * testsuite/gas/mips/branch-local-ignore-3.d: New test. * testsuite/gas/mips/branch-local-ignore-n32-2.d: New test. * testsuite/gas/mips/branch-local-ignore-n32-3.d: New test. * testsuite/gas/mips/branch-local-ignore-n64-2.d: New test. * testsuite/gas/mips/branch-local-ignore-n64-3.d: New test. * testsuite/gas/mips/mips.exp: Run the new tests. ld/ * emultempl/mipself.em (ignore_branch_isa): New variable. (mips_create_output_section_statements): Rename `_bfd_mips_elf_insn32' called to `_bfd_mips_elf_linker_flags', add `ignore_branch_isa' argument. (PARSE_AND_LIST_PROLOGUE): Add OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA enum values. (PARSE_AND_LIST_LONGOPTS): Add "ignore-branch-isa" and "no-ignore-branch-isa" options. (PARSE_AND_LIST_OPTIONS): Add `--ignore-branch-isa' and `--no-ignore-branch-isa'. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA. * ld.texinfo (Options specific to MIPS targets): Add `--ignore-branch-isa' and `--no-ignore-branch-isa' options. (ld and the MIPS family): Likewise. * testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: New test. * testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: New test. * testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-2.d: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-mips16: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-micromips: New test. * testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
2017-01-23Fix spelling mistakes and typos in the GAS sources.Nick Clifton1-5/+5
PR gas/21072 * asintl.h: Fix spelling mistakes and typos. * atof-generic.c: Likewise. * bit_fix.h: Likewise. * config/atof-ieee.c: Likewise. * config/bfin-defs.h: Likewise. * config/bfin-parse.y: Likewise. * config/obj-coff-seh.h: Likewise. * config/obj-coff.c: Likewise. * config/obj-evax.c: Likewise. * config/obj-macho.c: Likewise. * config/rx-parse.y: Likewise. * config/tc-aarch64.c: Likewise. * config/tc-alpha.c: Likewise. * config/tc-arc.c: Likewise. * config/tc-arm.c: Likewise. * config/tc-avr.c: Likewise. * config/tc-bfin.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-cris.c: Likewise. * config/tc-crx.c: Likewise. * config/tc-d10v.c: Likewise. * config/tc-d30v.c: Likewise. * config/tc-dlx.c: Likewise. * config/tc-epiphany.c: Likewise. * config/tc-frv.c: Likewise. * config/tc-hppa.c: Likewise. * config/tc-i370.c: Likewise. * config/tc-i386-intel.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-m32r.c: Likewise. * config/tc-m68hc11.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-mcore.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-mep.h: Likewise. * config/tc-metag.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-msp430.h: Likewise. * config/tc-nds32.c: Likewise. * config/tc-nds32.h: Likewise. * config/tc-nios2.c: Likewise. * config/tc-nios2.h: Likewise. * config/tc-ns32k.c: Likewise. * config/tc-pdp11.c: Likewise. * config/tc-ppc.c: Likewise. * config/tc-pru.c: Likewise. * config/tc-rx.c: Likewise. * config/tc-s390.c: Likewise. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sh.c: Likewise. * config/tc-sh64.c: Likewise. * config/tc-sparc.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-v850.c: Likewise. * config/tc-vax.c: Likewise. * config/tc-visium.c: Likewise. * config/tc-xgate.c: Likewise. * config/tc-xtensa.c: Likewise. * config/tc-z80.c: Likewise. * config/tc-z8k.c: Likewise. * config/te-vms.c: Likewise. * config/xtensa-relax.c: Likewise. * doc/as.texinfo: Likewise. * doc/c-arm.texi: Likewise. * doc/c-hppa.texi: Likewise. * doc/c-i370.texi: Likewise. * doc/c-i386.texi: Likewise. * doc/c-m32r.texi: Likewise. * doc/c-m68k.texi: Likewise. * doc/c-mmix.texi: Likewise. * doc/c-msp430.texi: Likewise. * doc/c-nds32.texi: Likewise. * doc/c-ns32k.texi: Likewise. * doc/c-riscv.texi: Likewise. * doc/c-rx.texi: Likewise. * doc/c-s390.texi: Likewise. * doc/c-tic6x.texi: Likewise. * doc/c-tilegx.texi: Likewise. * doc/c-tilepro.texi: Likewise. * doc/c-v850.texi: Likewise. * doc/c-xgate.texi: Likewise. * doc/c-xtensa.texi: Likewise. * dwarf2dbg.c: Likewise. * ecoff.c: Likewise. * itbl-ops.c: Likewise. * listing.c: Likewise. * macro.c: Likewise. * po/gas.pot: Likewise. * read.c: Likewise. * struc-symbol.h: Likewise. * symbols.h: Likewise. * testsuite/gas/arc/relocs-errors.err: Likewise. * write.c: Likewise.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-3/+3
2016-12-31PRU GAS PortDimitar Dimitrov1-0/+32
* NEWS: Mention new PRU target. * Makefile.am: Add PRU target. * config/obj-elf.c: Ditto. * configure.tgt: Ditto. * config/tc-pru.c: New file. * config/tc-pru.h: New file. * doc/Makefile.am: Add documentation for PRU GAS port. * doc/all.texi, Ditto. * doc/as.texinfo: Ditto. * doc/c-pru.texi: Document PRU GAS options. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/pru/alu.d: New file for PRU GAS testsuite. * testsuite/gas/pru/alu.s: Ditto. * testsuite/gas/pru/branch.d: Ditto. * testsuite/gas/pru/branch.s: Ditto. * testsuite/gas/pru/illegal.l: Ditto. * testsuite/gas/pru/illegal.s: Ditto. * testsuite/gas/pru/ldi.d: Ditto. * testsuite/gas/pru/ldi.s: Ditto. * testsuite/gas/pru/ldst.d: Ditto. * testsuite/gas/pru/ldst.s: Ditto. * testsuite/gas/pru/loop.d: Ditto. * testsuite/gas/pru/loop.s: Ditto. * testsuite/gas/pru/misc.d: Ditto. * testsuite/gas/pru/misc.s: Ditto. * testsuite/gas/pru/pru.exp: Ditto. * testsuite/gas/pru/pseudo.d: Ditto. * testsuite/gas/pru/pseudo.s: Ditto. * testsuite/gas/pru/warn_reglabel.l: Ditto. * testsuite/gas/pru/warn_reglabel.s: Ditto. * testsuite/gas/pru/xfr.d: Ditto. * testsuite/gas/pru/xfr.s: Ditto. * testsuite/gas/lns/lns.exp: Mark lns-common-1-alt variant for PRU. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2016-12-21Document character escape sequencesAlan Modra1-6/+7
PR gas/10946 * doc/as.texinfo (Chars): Document escape sequences.
2016-12-20Re-work RISC-V gas flags: now we just support -mabi and -marchAndrew Waterman1-3/+2
We've decided to standardize on two flags for RISC-V: "-march" sets the target architecture (which determines which instructions can be generated), and "-mabi" sets the target ABI. We needed to rework this because the old flag set didn't support soft-float or single-float ABIs, and didn't support an x32-style ABI on RISC-V. Additionally, we've changed the behavior of the -march flag: it's now a lot stricter and only parses things we can actually understand. Additionally, it's now lowercase-only: the rationale is that while the RISC-V ISA manual specifies that ISA strings are case-insensitive, in Linux-land things are usually case-sensitive. Since this flag can be used to determine library paths, we didn't want to bake some case-insensitivity in there that would case trouble later. This patch implements these two new flags and removes the old flags that could conflict with these. There wasn't a RISC-V release before, so we want to just support a clean flag set. include/ * elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define. (EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define. (EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define. (EF_RISCV_FLOAT_ABI_QUAD): Define. bfd/ * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT. binutils/ * readelf.c (get_machine_flags): Use EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of EF_RISCV_{SOFT,HARD}_FLOAT. gas/ * config/tc-riscv.h (xlen): Delete. * config/tc-riscv.c (xlen): Make static. (abi_xlen): New variable. (options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC} with OPTION_MABI. (md_longopts): Likewise. (md_parse_option): Likewise. (riscv_elf_final_processing): Likewise. * doc/as.texinfo (Target RISC-V options): Likewise. * doc/c-riscv.texi (OPTIONS): Likewise. * config/tc-riscv.c (float_mode): Removed. (float_abi): New type, specifies the floating-point ABI. (riscv_set_abi): New function. (riscv_add_subset): Only allow lower-case ISA names and require them to start with "rv". (riscv_after_parse_args): Likewise. opcodes/ * riscv-dis.c (riscv_disassemble_insn): Default to the ELF's XLEN when none is provided.
2016-11-04Update RISC-V documentation and make sure that it is included in the gas ↵Palmer Dabbelt1-0/+14
info file. * Makefile.am (CPU_DOCS): Add c-riscv.texi. * Makefile.in: Regenerate. * doc/all.texi: Set RISCV. * doc/as.texinfo: Add RISCV options. Add RISC-V-Dependent node. Include c-riscv.texi. * doc/c-riscv.texi: Rename RISC-V Options to RISC-V-Opts.
2016-11-01Add support for RISC-V architecture.Nick Clifton1-0/+19
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file.
2016-09-29Add .cfi_val_offset GAS command.Andreas Krebbel1-0/+3
This patch adds support for .cfi_val_offset GAS pseudo command which maps to DW_CFA_val_offset and DW_CFA_val_offset_sf. gas/ChangeLog: 2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * doc/as.texinfo: Add docu for .cfi_val_offset. * dw2gencfi.c (cfi_add_CFA_val_offset): New function. (dot_cfi): Add case for DW_CFA_val_offset. (output_cfi_insn): Likewise. (cfi_pseudo_table): Add entry for cfi_val_offset. * dw2gencfi.h: Add prototype for cfi_add_CFA_val_offset. * testsuite/gas/cfi/cfi-common-8.d: New test. * testsuite/gas/cfi/cfi-common-8.s: New test. * testsuite/gas/cfi/cfi.exp: Run cfi-common-8 testcase. binutils/ChangeLog: 2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * dwarf.c (display_debug_frames): Adjust output line.
2016-09-14gas: detect DCTI couples in sparcJose E. Marchesi1-3/+14
Before SPARC V9 the effect of having a delayed branch instruction in the delay slot of a conditional delayed branch was undefined. In SPARC V9 DCTI couples are well defined. However, starting with the UltraSPARC Architecture 2005, DCTI couples (of all kind) are deprecated and should not be used, as they may be slow or behave differently to what the programmer expects. This patch adds a new command line option --dcti-couples-detect to `as', disabled by default, that makes the assembler to warn the user if an unpredictable DCTI couple is found. Tests and documentation are included. gas/ChangeLog: 2016-09-14 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (md_assemble): Detect and warning on unpredictable DCTI couples in certain arches. (dcti_couples_detect): New global. (md_longopts): Add command line option -dcti-couples-detect. (md_show_usage): Document -dcti-couples-detect. (md_parse_option): Handle OPTION_DCTI_COUPLES_DETECT. * testsuite/gas/sparc/sparc.exp (gas_64_check): Run dcti-couples-v8, dcti-couples-v9 and dcti-couples-v9c tests. * testsuite/gas/sparc/dcti-couples.s: New file. * testsuite/gas/sparc/dcti-couples-v9c.d: Likewise. * testsuite/gas/sparc/dcti-couples-v8.d: Likewise. * testsuite/gas/sparc/dcti-couples-v9.d: Likewise. * testsuite/gas/sparc/dcti-couples-v9c.l: Likewise. * testsuite/gas/sparc/dcti-couples-v8.l: Likewise. * doc/as.texinfo (Overview): Document --dcti-couples-detect. * doc/c-sparc.texi (Sparc-Opts): Likewise.
2016-09-12S/390: Add alternate processor names.Andreas Krebbel1-3/+5
This patch adds alternate CPU names which adhere to the number of the architecture document. So instead of having z196, zEC12, and z13 you can use arch9, arch10, and arch11. The old cpu names stay valid and should primarily be used. The alternate names are supposed to improve compatibility with the IBM XL compiler toolchain which uses the arch numbering. opcodes/ChangeLog: 2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * s390-mkopc.c (main): Support alternate arch strings. gas/ChangeLog: 2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * config/tc-s390.c (s390_parse_cpu): Support alternate arch strings. * doc/as.texinfo: Document new arch strings. * doc/c-s390.texi: Likewise.
2016-06-27Add command line option to stop the assembler from padding the end of ↵Nick Clifton1-1/+17
sections to their alignment boundary. PR gas/20247 * as.h (do_not_pad_sections_to_alignment): New global variable. * as.c (show_usage): Add --no-pad-sections. (parse_args): Likewise. * write.c (size_seg): Skip padding the end of the section if requested from the command line. (SUB_SEGMENT_ALIGN): Likewise. * doc/as.texinfo: Document the new option. * NEWS: Mention the new feature. * testsuite/gas/elf/section11.s: New test. * testsuite/gas/elf/section11.d: New test driver. * testsuite/gas/elf/elf.exp: Run the new test.
2016-06-21Arc assembler: Convert nps400 from a machine type to an extension.Graham Markall1-1/+1
gas * config/tc-arc.c (check_cpu_feature, md_parse_option): Add nps400 option and feature. Add check for nps400 feature. Refactor existing checks to check subclass before feature enablement. (md_show_usage): Document flags for NPS-400 and add some other undocumented flags. (cpu_type): Remove nps400 CPU type entry (check_zol): Remove bfd_mach_arc_nps400 case. (md_show_usage): Add help on -mcpu=nps400. (cpu_types): Add entry for nps400 as arc700 plus nps400 extension set. * doc/c-arc.texi: Document the -mnps400, -mspfp, -mdpfp, and -fpuda flags. Document -mcpu=nps400. * testsuite/gas/arc/nps-400-0.d: Use -mcpu=arc700 -mnps400. Change expected flags to match ARC700 instead of NPS400. * testsuite/gas/arc/nps-400-1.d: Use -mcpu=arc700 -mnps400. * testsuite/gas/arc/nps-400-2.d: Likewise. * testsuite/gas/arc/nps-400-3.d: Likewise. * testsuite/gas/arc/nps-400-4.d: Likewise. * testsuite/gas/arc/nps-400-5.d: Likewise. * testsuite/gas/arc/nps-400-6.d: Likewise. * testsuite/gas/arc/nps-400-7.d: Likewise. * testsuite/gas/arc/textinsn2op01.s: Change opcode of myinsn to avoid clash with cbba instruction. * testsuite/gas/arc/textinsn2op01.d: Likewise. * testsuite/gas/arc/textinsn3op.d: Likewise. * testsuite/gas/arc/textinsn3op.s: Likewise. * testsuite/gas/arc/nps-400-0.d: Test using NPS-400 using -mcpu=nps400 as an alternative to -mcpu=arc700 -mnps400 flags. binutils* readelf.c (decode_ARC_machine_flags): Remove E_ARC_MACH_NPS400 case. ld * testsuite/ld-arc/nps-1a.d: Use -mcpu=arc700 -mnps400. * testsuite/ld-arc/nps-1b.d: Likewise. include * opcode/arc.h: Add nps400 extension and instruction subclass. Remove ARC_OPCODE_NPS400 * elf/arc.h: Remove E_ARC_MACH_NPS400 opcodes * arc-dis.c (arc_insn_length): Add comment on instruction length. Use same method for determining instruction length on ARC700 and NPS-400. (arc_insn_length, print_insn_arc): Remove bfd_mach_arc_nps400. * arc-nps400-tbl.h: Make all nps400 instructions ARC700 instructions with the NPS400 subclass. * arc-opc.c: Likewise. bfd * archures.c: Remove bfd_mach_arc_nps400. * bfd-in2.h: Likewise. * cpu-arc.c (arch_info_struct): Likewise. * elf32-arc.c (arc_elf_object_p, arc_elf_final_write_processing): Likewise.
2016-05-11Add MIPS32 DSPr3 support.Matthew Fortune1-1/+9
bfd/ * elfxx-mips.c (print_mips_ases): Add DSPR3. binutils/ * readelf.c (print_mips_ases): Add DSPR3. gas/ * config/tc-mips.c (options): Add OPTION_DSPR3 and OPTION_NO_DSPR3. (md_longopts): Likewise. (md_show_usage): Add help for -mdspr3 and -mno-dspr3. (mips_ases): Define availability for DSPr3. (mips_ase_groups): Add ASE_DSPR3 to the DSP group. (mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3. * doc/as.texinfo: Document -mdspr3, -mno-dspr3. Fix -mdspr2 formatting. * doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and .set nodspr3. Fix -mdspr2 formatting. * testsuite/gas/mips/mips32-dspr3.d: New file. * testsuite/gas/mips/mips32-dspr3.s: Likewise. * testsuite/gas/mips/mips.exp: Run mips32-dspr3 test. include/ * elf/mips.h (AFL_ASE_DSPR3): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_DSPR3. * opcode/mips.h (ASE_DSPR3): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and mips64r6. * mips-opc.c (D34): New macro. (mips_builtin_opcodes): Define bposge32c for DSPr3.
2016-04-19.cfi_remember_state/.cfi_restore_state documentationMartin Galvan1-5/+48
* doc/as.texinfo (.cfi_remember_state, .cfi_restore_state): Improve documentation.
2016-03-18Fix generation of as.1 manual page so that it can be converted to DocBook ↵Nick Clifton1-0/+2
format. gas * doc/as.texinfo: Place the target specific command line options into their own man page section. etc * texi2pod.pl: Add TARGET to the list of recognised man page sections.
2016-02-26Properly implement STT_COMMONH.J. Lu1-0/+9
The BFD configure option, --enable-elf-stt-common, can't be to used to verify STT_COMMON implementation with the normal binutils build. Instead, this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF assembler/objcopy and adds -z common/-z nocommon to ld. A configure option, --enable-elf-stt-common, is added to gas to specify whether ELF assembler should generate common symbols with the STT_COMMON type by default. Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF common symbols. bfd/ PR ld/19645 * bfd.c (bfd): Change flags to 20 bits. (BFD_CONVERT_ELF_COMMON): New. (BFD_USE_ELF_STT_COMMON): Likewise. (BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. * configure.ac: Remove --enable-elf-stt-common. * elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. * elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for STT_COMMON. * elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check STT_COMMON. (elf_link_convert_common_type): New function. (elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx. * elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON to object_flags. (TARGET_LITTLE_SYM): Likewise. * syms.c (BSF_KEEP_G): Renamed to ... (BSF_ELF_COMMON): This. * bfd-in2.h: Regenerated. * config.in: Likewise. * configure: Likewise. binutils/ PR ld/19645 * NEWS: Mention --elf-stt-common= for objcopy. * doc/binutils.texi: Document --elf-stt-common= for objcopy. * objcopy.c (do_elf_stt_common): New. (command_line_switch): Add OPTION_ELF_STT_COMMON. (copy_options): Add --elf-stt-common=. (copy_usage): Add --elf-stt-common=. (copy_object): Also check do_elf_stt_common for ELF targets. (copy_file): Handle do_elf_stt_common. (copy_main): Handle OPTION_ELF_STT_COMMON. * readelf.c (apply_relocations): Support STT_COMMON. * testsuite/binutils-all/common-1.s: New file. * testsuite/binutils-all/common-1a.d: Likewise. * testsuite/binutils-all/common-1b.d: Likewise. * testsuite/binutils-all/common-1c.d: Likewise. * testsuite/binutils-all/common-1d.d: Likewise. * testsuite/binutils-all/common-1e.d: Likewise. * testsuite/binutils-all/common-1f.d: Likewise. * testsuite/binutils-all/common-2.s: Likewise. * testsuite/binutils-all/common-2a.d: Likewise. * testsuite/binutils-all/common-2b.d: Likewise. * testsuite/binutils-all/common-2c.d: Likewise. * testsuite/binutils-all/common-2d.d: Likewise. * testsuite/binutils-all/common-2e.d: Likewise. * testsuite/binutils-all/common-2f.d: Likewise. * testsuite/binutils-all/objcopy.exp (objcopy_test_elf_common_symbols): New proc. Run objcopy_test_elf_common_symbols for ELF targets gas/ PR ld/19645 * NEWS: Mention --enable-elf-stt-common and --elf-stt-common= for ELF assemblers. * as.c (flag_use_elf_stt_common): New. (show_usage): Add --elf-stt-common=. (option_values): Add OPTION_ELF_STT_COMMON. (std_longopts): Add --elf-stt-common=. (parse_args): Handle --elf-stt-common=. * as.h (flag_use_elf_stt_common): New. * config.in: Regenerated. * configure: Likewise. * configure.ac: Add --enable-elf-stt-common and define DEFAULT_GENERATE_ELF_STT_COMMON. * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set. * doc/as.texinfo: Document --elf-stt-common=. * testsuite/gas/elf/common3.s: New file. * testsuite/gas/elf/common3a.d: Likewise. * testsuite/gas/elf/common3b.d: Likewise. * testsuite/gas/elf/common4.s: Likewise. * testsuite/gas/elf/common4a.d: Likewise. * testsuite/gas/elf/common4b.d: Likewise. * testsuite/gas/i386/dw2-compress-3b.d: Likewise. * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a and common4b. * testsuite/gas/i386/dw2-compress-3.d: Renamed to ... * testsuite/gas/i386/dw2-compress-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ... * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/i386.exp: Run dw2-compress-3a, dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead of dw2-compress-3 and dw2-compressed-3. include/ PR ld/19645 * bfdlink.h (bfd_link_elf_stt_common): New enum. (bfd_link_info): Add elf_stt_common. ld/ PR ld/19645 * NEWS: Mention -z common/-z nocommon for ELF targets. * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle -z common and -z nocommon. * ld.texinfo: Document -z common/-z nocommon. * lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon. * testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and --elf-stt-common=yes with assembler. * testsuite/ld-elfcomm/common-1.s: New file. * testsuite/ld-elfcomm/common-1a.d: Likewise. * testsuite/ld-elfcomm/common-1b.d: Likewise. * testsuite/ld-elfcomm/common-1c.d: Likewise. * testsuite/ld-elfcomm/common-1d.d: Likewise. * testsuite/ld-elfcomm/common-1e.d: Likewise. * testsuite/ld-elfcomm/common-1f.d: Likewise. * testsuite/ld-elfcomm/common-2.s: Likewise. * testsuite/ld-elfcomm/common-2a.d: Likewise. * testsuite/ld-elfcomm/common-2b.d: Likewise. * testsuite/ld-elfcomm/common-2c.d: Likewise. * testsuite/ld-elfcomm/common-2d.d: Likewise. * testsuite/ld-elfcomm/common-2e.d: Likewise. * testsuite/ld-elfcomm/common-2f.d: Likewise. * testsuite/ld-elfcomm/common-3a.rd: Likewise. * testsuite/ld-elfcomm/common-3b.rd: Likewise. * testsuite/ld-i386/pr19645.d: Likewise. * testsuite/ld-i386/pr19645.s: Likewise. * testsuite/ld-x86-64/largecomm-1.s: Likewise. * testsuite/ld-x86-64/largecomm-1a.d: Likewise. * testsuite/ld-x86-64/largecomm-1b.d: Likewise. * testsuite/ld-x86-64/largecomm-1c.d: Likewise. * testsuite/ld-x86-64/largecomm-1d.d: Likewise. * testsuite/ld-x86-64/largecomm-1e.d: Likewise. * testsuite/ld-x86-64/largecomm-1f.d: Likewise. * testsuite/ld-x86-64/pr19645.d: Likewise. * testsuite/ld-x86-64/pr19645.s: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes with assembler. (assembler_generates_commons): Removed. Run -z common/-z nocommon tests. Run *.d tests. * testsuite/ld-i386/i386.exp: Run pr19645. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with assembler. Test STT_COMMON with readelf.
2016-02-16Fix formatting problems caused by previous update to as.texinfo.Nick Clifton1-6/+11
* doc/as.texinfo (Section): Fix up texinfo snafus in previous update.
2016-02-15Enhance GAS's .section directive so that it can take numeric values for the ↵Nick Clifton1-1/+24
flags and type fields. (ELF only) gas * doc/as.texinfo (.section): Document that numeric values can now be used for the flags and type fields of the ELF target's .section directive. Add notes about the restrictions on setting flags and types. * config/obj-elf.c (obj_elf_change_section): Allow known sections to be given processor specific section types. Allow processor and application specific flags of a section to be set after definition. (obj_elf_parse_section_letters): Handle parsing numeric values. (obj_elf_section_type): Handle parsing numeric values. (obj_elf_section): Allow numeric type values. * config/obj-elf.h (obj_elf_change_section): Update prototype. * testsuite/gas/elf/section10.d: New test. * testsuite/gas/elf/section10.s: Source file for new test. * testsuite/gas/elf/elf.exp: Run the new test. * testsuite/gas/i386/ilp32/x86-64-unwind.d: Remove dependency upon the description of the flags produced by readelf. * testsuite/gas/tic6x/scomm-directive-4.d: Likewise. * NEWS: Mention the new feature. bfd * elf-bfd.h (struct bfd_elf_special_section): Use unsigned values for length and type fields. Use a signed value for the suffix_length field. binutils* readelf.c (get_section_type_name): Add hex prefix to offsets printed for LOPROC and LOOS values. Ensure that a result is always returned for the V850 target, even when an unrecognised processor specific value is encountered. (process_section_headers): Display key values in the order in which they appear to the user. Add the "C (compressed)" value to the list. ld * testsuite/ld-i386/pr12718.d: Remove dependency upon the description of the flags produced by readelf. * testsuite/ld-i386/pr12921.d: Likewise. * testsuite/ld-i386/tlsbin-nacl.rd: Likewise. * testsuite/ld-i386/tlsbin.rd: Likewise. * testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsbindesc.rd: Likewise. * testsuite/ld-i386/tlsdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsdesc.rd: Likewise. * testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsgdesc.rd: Likewise. * testsuite/ld-i386/tlsnopic-nacl.rd: Likewise. * testsuite/ld-i386/tlsnopic.rd: Likewise. * testsuite/ld-i386/tlspic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic.rd: Likewise. * testsuite/ld-s390/tlsbin.rd: Likewise. * testsuite/ld-s390/tlsbin_64.rd: Likewise. * testsuite/ld-s390/tlspic.rd: Likewise. * testsuite/ld-s390/tlspic_64.rd: Likewise. * testsuite/ld-sh/tlsbin-2.d: Likewise. * testsuite/ld-sh/tlspic-2.d: Likewise. * testsuite/ld-tic6x/common.d: Likewise. * testsuite/ld-tic6x/shlib-1.rd: Likewise. * testsuite/ld-tic6x/shlib-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-noindex.rd: Likewise. * testsuite/ld-tic6x/static-app-1.rd: Likewise. * testsuite/ld-tic6x/static-app-1b.rd: Likewise. * testsuite/ld-tic6x/static-app-1r.rd: Likewise. * testsuite/ld-tic6x/static-app-1rb.rd: Likewise. * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise. * testsuite/ld-x86-64/ilp32-4.d: Likewise. * testsuite/ld-x86-64/pr12718.d: Likewise. * testsuite/ld-x86-64/pr12921.d: Likewise. * testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise. * testsuite/ld-x86-64/split-by-file.rd: Likewise. * testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc.rd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsdesc.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc.rd: Likewise. * testsuite/ld-x86-64/tlspic-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic.rd: Likewise. * testsuite/ld-xtensa/tlsbin.rd: Likewise. * testsuite/ld-xtensa/tlspic.rd: Likewise.
2016-02-11Allow the .cfi_sections directive to be reissued provided that CFI ↵Nick Clifton1-0/+8
generation has not yet started. PR gas/19614 * dw2gencfi.c (cfi_sections_set): Delay setting this variable until it is actually used. (cfi_set_sections): Set cfi_sections_set to true. (dot_cfi_startproc): Likewise. (dot_cfi_endproc): Likewise. (dot_cfi_fde_data): Likewise. (cfi_finish): Likewise. (dot_cfi_sections): Do not set cfi_sections_set. * doc/as.texinfo (.cfi_sections): Note that targets can provide their own cfi section name. Also note that the directive can be reissued provided that CFI generation has not started. * testsuite/gas/mips/compact-eh-err2.s: Add .cfi_startproc and .cfi_endproc directives so that the redefinition of .cfi_sections will trigger the generation of the error message. * testsuite/gas/mips/compact-eh-err2.l: Update expected line number of error message.
2016-02-10Add support for ARC instruction relaxation in the assembler.Claudiu Zissulescu1-0/+1
gas/ 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> Janek van Oirschot <jvanoirs@synopsys.com> * config/tc-arc.h (TC_FRAG_TYPE, TC_PCREL_ADJUST, MAX_INSN_ARGS) (MAX_INSN_FLGS, MAX_FLAG_NAME_LENGHT, TC_GENERIC_RELAX_TABLE): Define. (arc_flags, arc_relax_type): New structure. * config/tc-arc.c (FRAG_MAX_GROWTH, RELAX_TABLE_ENTRY) (RELAX_TABLE_ENTRY_MAX): New define. (relaxation_state, md_relax_table, arc_relaxable_insns) (arc_num_relaxable_ins): New variable. (rlx_operand_type, arc_rlx_types): New enums. (arc_relaxable_ins): New structure. (OPTION_RELAX): New option. (arc_insn): New relax member. (arc_flags): Remove. (relax_insn_p): New function. (apply_fixups): Likewise. (relaxable_operand): Likewise. (may_relax_expr): Likewise. (relaxable_flag): Likewise. (arc_pcrel_adjust): Likewise. (md_estimate_size_before_relax): Implement. (md_convert_frag): Likewise. (md_parse_option): Handle new mrelax option. (md_show_usage): Likewise. (assemble_insn): Set relax member. (emit_insn0): New function. (emit_insn1): Likewise. (emit_insn): Handle relaxation case. * NEWS: Mention the new relaxation option. * doc/c-arc.texi (ARC Options): Document new mrelax option. gas/testsuite 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> * gas/arc/relax-avoid1.d: New file. * gas/arc/relax-avoid1.s: Likewise. * gas/arc/relax-avoid2.d: Likewise. * gas/arc/relax-avoid2.s: Likewise. * gas/arc/relax-avoid3.d: Likewise. * gas/arc/relax-avoid3.s: Likewise. * gas/arc/relax-b.d: Likewise. * gas/arc/relax-b.s: Likewise. include/opcode/ 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> Janek van Oirschot <jvanoirs@synopsys.com> * arc.h (arc_opcode arc_relax_opcodes, arc_num_relax_opcodes): Declare. opcodes/ 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> Janek van Oirschot <jvanoirs@synopsys.com> * arc-opc.c (arc_relax_opcodes, arc_num_relax_opcodes): New variable.
2016-01-20Upda the documentation on assembler error message generation.Nick Clifton1-8/+27
PR 19499 * doc/as.texinfo (Errors): Correct documentation describing the interaction of .file and .line with warning and error messages.
2016-01-01Copyright update for binutilsAlan Modra1-3/+3
2015-12-21Fix building pdfs of assembler documentation.Nick Clifton1-11/+19
PR gas/19386 * doc/as.texinfo (Strings): Prepend a space to index entries that start with a backslash. This works around a problem in the pdf generator.
2015-11-11Add assembler, disassembler and linker support for power9.Peter Bergner1-1/+2
include/opcode/ * ppc.h (PPC_OPCODE_POWER9): New define. (PPC_OPCODE_VSX3): Likewise. opcodes/ * ppc-dis.c (ppc_opts): Add "power9" and "pwr9" entries. Add PPC_OPCODE_VSX3 to the vsx entry. (powerpc_init_dialect): Set default dialect to power9. * ppc-opc.c (insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd, insert_dxdn, extract_dxdn, insert_l0, extract_l0, insert_l1, extract_l1 insert_xtq6, extract_xtq6): New static functions. (insert_esync): Test for illegal L operand value. (DCMX, DCMXS, DXD, NDXD, L0, L1, RC, FC, UIM6, X_R, RIC, PRS, XSQ6, XTQ6, LRAND, IMM8, DQX, DQX_MASK, DX, DX_MASK, VXVAPS_MASK, VXVA,XVA, XX2VA, XVARC, XBF_MASK, XX2UIM4_MASK, XX2BFD_MASK, XX2DCMXS_MASK, XVA_MASK, XRLA_MASK, XBFRARB_MASK, XLRAND_MASK, POWER9, PPCVEC3, PPCVSX3): New defines. (powerpc_opcodes) <ps_cmpu0, ps_cmpo0, ps_cmpu1, ps_cmpo1, fcmpu, fcmpo, ftdiv, ftsqrt>: Use XBF_MASK. <mcrxr>: Use XBFRARB_MASK. <addpcis, bcdcfn., bcdcfsq., bcdcfz., bcdcpsgn., bcdctn., bcdctsq., bcdctz., bcds., bcdsetsgn., bcdsr., bcdtrunc., bcdus., bcdutrunc., cmpeqb, cmprb, cnttzd, cnttzd., cnttzw, cnttzw., copy, copy_first, cp_abort, darn, dtstsfi, dtstsfiq, extswsli, extswsli., ldat, ldmx, lwat, lxsd, lxsibzx, lxsihzx, lxssp, lxv, lxvb16x, lxvh8x, lxvl, lxvll, lxvwsx, lxvx, maddhd, maddhdu, maddld, mcrxrx, mfvsrld, modsd, modsw, modud, moduw, msgsync, mtvsrdd, mtvsrws, paste, paste., paste_last, rmieg, setb, slbieg, slbsync, stdat, stop, stwat, stxsd, stxsibx, stxsihx, stxssp, stxv, stxvb16x, stxvh8x, stxvl, stxvll, stxvx, subpcis, urfid, vbpermd, vclzlsbb, vcmpneb, vcmpneb., vcmpneh, vcmpneh., vcmpnew, vcmpnew., vcmpnezb, vcmpnezb., vcmpnezh, vcmpnezh., vcmpnezw, vcmpnezw., vctzb, vctzd, vctzh, vctzlsbb, vctzw, vextractd, vextractub, vextractuh, vextractuw, vextsb2d, vextsb2w, vextsh2d, vextsh2w, vextsw2d, vextublx, vextubrx, vextuhlx, vextuhrx, vextuwlx, vextuwrx, vinsertb, vinsertd, vinserth, vinsertw, vmul10cuq, vmul10ecuq, vmul10euq, vmul10uq, vnegd, vnegw, vpermr, vprtybd, vprtybq, vprtybw, vrldmi, vrldnm, vrlwmi, vrlwnm, vslv, vsrv, wait, xsabsqp, xsaddqp, xsaddqpo, xscmpeqdp, xscmpexpdp, xscmpexpqp, xscmpgedp, xscmpgtdp, xscmpnedp, xscmpoqp, xscmpuqp, xscpsgnqp, xscvdphp, xscvdpqp, xscvhpdp, xscvqpdp, xscvqpdpo, xscvqpsdz, xscvqpswz, xscvqpudz, xscvqpuwz, xscvsdqp, xscvudqp, xsdivqp, xsdivqpo, xsiexpdp, xsiexpqp, xsmaddqp, xsmaddqpo, xsmaxcdp, xsmaxjdp, xsmincdp, xsminjdp, xsmsubqp, xsmsubqpo, xsmulqp, xsmulqpo, xsnabsqp, xsnegqp, xsnmaddqp, xsnmaddqpo, xsnmsubqp, xsnmsubqpo, xsrqpi, xsrqpix, xsrqpxp, xssqrtqp, xssqrtqpo, xssubqp, xssubqpo, xststdcdp, xststdcqp, xststdcsp, xsxexpdp, xsxexpqp, xsxsigdp, xsxsigqp, xvcmpnedp, xvcmpnedp., xvcmpnesp, xvcmpnesp., xvcvhpsp, xvcvsphp, xviexpdp, xviexpsp, xvtstdcdp, xvtstdcsp, xvxexpdp, xvxexpsp, xvxsigdp, xvxsigsp, xxbrd, xxbrh, xxbrq, xxbrw, xxextractuw, xxinsertw, xxperm, xxpermr, xxspltib>: New instructions. <doze, nap, sleep, rvwinkle, waitasec, lxvx, stxvx>: Disable on POWER9. <tlbiel, tlbie, sync, slbmfev, slbmfee>: Add additional operands. include/elf/ * ppc.h (R_PPC_REL16DX_HA): New reloction. * ppc64.h (R_PPC64_REL16DX_HA): Likewise. bfd/ * elf32-ppc.c (ppc_elf_howto_raw): Add R_PPC_REL16DX_HA. (ppc_elf_reloc_type_lookup): Handle R_PPC_REL16DX_HA. (ppc_elf_addr16_ha_reloc): Likewise. (ppc_elf_check_relocs): Likewise. (ppc_elf_relocate_section): Likewise. (is_insn_dq_form): Handle lxv and stxv instructions. * elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_REL16DX_HA. (ppc64_elf_reloc_type_lookup): Handle R_PPC64_REL16DX_HA. (ppc64_elf_ha_reloc): Likewise. (ppc64_elf_check_relocs): Likewise. (ppc64_elf_relocate_section): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. * reloc.c (BFD_RELOC_PPC_REL16DX_HA): New. elfcpp/ * powerpc.h (R_POWERPC_REL16DX_HA): Define. gas/ * doc/as.texinfo (Target PowerPC): Document -mpower9 and -mpwr9. * doc/c-ppc.texi (PowerPC-Opts): Likewise. * config/tc-ppc.c (md_show_usage): Likewise. (md_assemble): Handle BFD_RELOC_PPC_REL16DX_HA. (md_apply_fix): Likewise. (ppc_handle_align): Handle power9's group ending nop. gas/testsuite/ * gas/ppc/altivec3.s: New test. * gas/ppc/altivec3.d: Likewise. * gas/ppc/vsx3.s: Likewise. * gas/ppc/vsx3.d: Likewise. * gas/ppc/power9.s: Likewise. * gas/ppc/power9.d: Likewise. * gas/ppc/ppc.exp: Run them. * gas/ppc/power8.s <lxvx, lxvd2x, stxvx, stxvd2x>: Add new tests. * gas/ppc/power8.d: Likewise. * gas/ppc/vsx.s: <lxvx, stxvx>: Rename invalid mnemonics ... <lxvd2x, stxvd2x>: ...to this. * gas/ppc/vsx.d: Likewise. gold/ * gold/powerpc.cc (Powerpc_relocate_functions::addr16_dq): New function. (Powerpc_relocate_functions::addr16dx_ha): Likewise. (Target_powerpc::Scan::local): Handle R_POWERPC_REL16DX_HA. (Target_powerpc::Scan::global): Likewise. (Target_powerpc::Relocate::relocate): Likewise. ld/testsuite/ * ld-powerpc/addpcis.d: New test. * ld-powerpc/addpcis.s: New test. * ld-powerpc/powerpc.exp: Run it.
2015-10-19Add a gas configure option to select the default behaviour for the ↵Nick Clifton1-1/+3
generation of debug sections - compressed or uncompressed. PR gas/19109 * configure.ac: Add option --enable-compressed-debug-sections. This sets the default behaviour for compressing debug sections. * as.c (flag_compress_debug): Define and initialise to COMPRESS_DEBUG_GABI_ZLIB if DEFAULT_COMPRESS_DEBUG is set. (show_usage): Indicate whether --no-compress-debug-sections or --compress-debug-sections is the default. * config/tc-i386.c (flag_compress_debug): Delete definition. * doc/as.texinfo (--nocompress-debug-sectionas): Update description. * NEWS: Announce the new feature. * config.in: Regenerate. * configure: Regenerate.
2015-10-07New ARC implementation.Nick Clifton1-4/+8
bfd * archures.c: Remove support for older ARC. Added support for new ARC cpus (ARC600, ARC601, ARC700, ARCV2). * bfd-in2.h: Likewise. * config.bfd: Likewise. * cpu-arc.c: Likewise. * elf32-arc.c: Totally changed file with a refactored inplementation of the ARC port. * libbfd.h: Added ARC specific relocation types. * reloc.c: Likewise. gas * config/tc-arc.c: Revamped file for ARC support. * config/tc-arc.h: Likewise. * doc/as.texinfo: Add new ARC options. * doc/c-arc.texi: Likewise. ld * configure.tgt: Added target arc-*-elf* and arc*-*-linux-uclibc*. * emulparams/arcebelf_prof.sh: New file * emulparams/arcebelf.sh: Likewise. * emulparams/arceblinux_prof.sh: Likewise. * emulparams/arceblinux.sh: Likewise. * emulparams/arcelf_prof.sh: Likewise. * emulparams/arcelf.sh: Likewise. * emulparams/arclinux_prof.sh: Likewise. * emulparams/arclinux.sh: Likewise. * emulparams/arcv2elfx.sh: Likewise. * emulparams/arcv2elf.sh: Likewise. * emultempl/arclinux.em: Likewise. * scripttempl/arclinux.sc: Likewise. * scripttempl/elfarc.sc: Likewise. * scripttempl/elfarcv2.sc: Likewise * Makefile.am: Add new ARC emulations. * Makefile.in: Regenerate. * NEWS: Mention the new feature. opcodes * arc-dis.c: Revamped file for ARC support * arc-dis.h: Likewise. * arc-ext.c: Likewise. * arc-ext.h: Likewise. * arc-opc.c: Likewise. * arc-fxi.h: New file. * arc-regs.h: Likewise. * arc-tbl.h: Likewise. binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact and ARCv2. (get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (is_none_reloc): Likewise. * NEWS: Mention the new feature. include * dis-asm.h (arc_get_disassembler): Correct declaration. * arc-reloc.def: Macro file with definition of all relocation types. * arc.h: Changed macros for the newly supported ARC cpus. Altered enum defining the supported relocations. * common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added macro for EM_ARC_COMPACT2. * arc-func.h: New file. * arc.h: Likewise.
2015-08-21Allow symbol and label names to be enclosed in double quotes.Nick Clifton1-1/+6
gas PR gas/18581 * expr.c (get_symbol_end): Rename to get_symbol_name. Add a return parameter pointing to the start of the symbol. Allow symbol names enclosed in double quotes. (restore_line_pointer): New function. Replace the NUL character inserted into the input stream with the given character. If the character was a double quote, advance the input pointer. * expr.h (get_symbol_end): Delete. (get_symbol_name): Add prototype. (restore_line_pointer): Prototype. * read.h (SKIP_WHITESPACE_AFTER_NAME): New macro. * doc/as.texinfo (Symbol Intro): Document that symbol names can now be enclosed in double quotes. * cond.c (s_ifdef): Replace get_symbol_end with get_symbol_name. Use restore_line_pointer to replace the NUL in the input stream. Use SKIP_WHITESPACE_AFTER_NAME to skip past the end of a symbol. Check for the use of double quoted symbol names. * expr.c: Likewise. * config/obj-aout.c: Likewise. * config/obj-coff-seh.c: Likewise. * config/obj-coff.c: Likewise. * config/obj-elf.c: Likewise. * config/obj-evax.c: Likewise. * config/obj-macho.c: Likewise. * config/obj-som.c: Likewise. * config/tc-alpha.c: Likewise. * config/tc-arc.c: Likewise. * config/tc-arm.c: Likewise. * config/tc-dlx.c: Likewise. * config/tc-h8300.c: Likewise. * config/tc-hppa.c: Likewise. * config/tc-i370.c: Likewise. * config/tc-i386-intel.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-iq2000.c: Likewise. * config/tc-m32r.c: Likewise. * config/tc-m68hc11.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-nios2.c: Likewise. * config/tc-ppc.c: Likewise. * config/tc-s390.c: Likewise. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-tic6x.c: Likewise. * config/tc-tilegx.c: Likewise. * config/tc-tilepro.c: Likewise. * config/tc-v850.c: Likewise. * config/tc-xtensa.c: Likewise. * config/tc-z80.c: Likewise. * dw2gencfi.c: Likewise. * dwarf2dbgc.: Likewise. * ecoff.c: Likewise. * read.c: Likewise. * stabs.c: Likewise. tests PR gas/18581 * gas/all/byte.d: Disable this test. Quoted expressions are now allowed in .byte directives. * gas/all/quoted-sym-names.s: New test. * gas/all/quoted-sym-names.d: Expected output. * gas/all/gas.exp: Run the new test.
2015-08-13Correct local label docAlan Modra1-5/+5
* doc/as.texinfo (Local Labels): Allowed range of N in local labels is non-negative integers, not positive integers.
2015-08-12xtensa: add --auto-litpools optionMax Filippov1-1/+2
Auto-litpools is the automated version of text-section-literals: literal pool candidate frags are planted every N frags and during relaxation they are turned into actual literal pools where literals are moved to become reachable for their first reference by L32R instruction. 2015-08-12 David Weatherford <weath@cadence.com> gas/ * config/tc-xtensa.c (struct litpool_frag, struct litpool_seg): New structures. (xtensa_maybe_create_literal_pool_frag): New function. (litpool_seg_list, auto_litpools, auto_litpool_limit) (litpool_buf, litpool_slotbuf): New static variables. (option_auto_litpools, option_no_auto_litpools) (option_auto_litpool_limit): New enum identifiers. (md_longopts): Add entries for auto-litpools, no-auto-litpools and auto-litpool-limit. (md_parse_option): Handle option_auto_litpools, option_no_auto_litpools and option_auto_litpool_limit. (md_show_usage): Add help for --[no-]auto-litpools and --auto-litpool-limit. (xtensa_mark_literal_pool_location): Record a place for literal pool with a call to xtensa_maybe_create_literal_pool_frag. (get_literal_pool_location): Find highest priority literal pool or convert candidate to literal pool when auto-litpools are used. (xg_assemble_vliw_tokens): Create literal pool after jump instruction. (xtensa_check_frag_count): Create candidate literal pool every auto_litpool_limit frags. (xtensa_relax_frag): Add jump around literals to non-empty literal pool. (xtensa_move_literals): Estimate literal pool addresses and move unreachable literals closer to their users, converting candidate to literal pool if needed. (xtensa_switch_to_non_abs_literal_fragment): Only emit error about missing .literal_position in case auto-litpools are not used. * config/tc-xtensa.h (xtensa_relax_statesE): New relaxation state: RELAX_LITERAL_POOL_CANDIDATE_BEGIN. * doc/as.texinfo (Xtensa options): Document --auto-litpools and --no-auto-litpools options. * doc/c-xtensa.texi (Xtensa options): Likewise. 2015-08-12 Max Filippov <jcmvbkbc@gmail.com> gas/testsuite/ * gas/xtensa/all.exp: Add auto-litpools to the list of xtensa tests. * gas/xtensa/auto-litpools.s: New file: auto-litpools test. * gas/xtensa/auto-litpools.s: New file: auto-litpools test result pattern.
2015-08-03Fix thinkos in the description of the --hash-size command line option for GAS.Nick Clifton1-5/+8
* doc/as.texinfo (Overview): Add --hash-size to the synopsis and fix typo in its entry: @kindex -> @item.
2015-07-14Make default compression gABI compliantH.J. Lu1-7/+10
All programs in binutils+gdb git repo now support gABI compression with the SHF_COMPRESSED bit. This patch makes the zlib-gabi option as compression default for gas, gold, ld and objcopy, instead of the zlib-gnu option whose outputs are incompatible with gABI. binutils/ * objcopy.c (copy_file): Set BFD_COMPRESS_GABI if not zlib-gnu. * doc/binutils.texi: Change --compress-debug-sections and --compress-debug-sections=zlib to zlib-gabi. binutils/testsuite/ * binutils-all/compress.exp: Update. gas/ * as.c (parse_args): Make --compress-debug-sections and --compress-debug-sections=zlib the same as --compress-debug-sections=zlib-gabi. * doc/as.texinfo: Change --compress-debug-sections and --compress-debug-sections=zlib to zlib-gabi. gold/ * compressed_output.cc (Output_compressed_section::set_final_data_size): Make --compress-debug-sections=zlib the same as --compress-debug-sections=zlib-gabi. * testsuite/Makefile.am (flagstest_compress_debug_sections.check): Expect ".debug_.*" with the SHF_COMPRESSED bit, instead of ".zdebug_". * testsuite/Makefile.in: Regenerated. ld/ * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Make --compress-debug-sections=zlib the same as --compress-debug-sections=zlib-gabi. * ld.texinfo: Change --compress-debug-sections=zlib to zlib-gabi. ld/testsuite/ * ld-elf/zlibbegin.rS: Updated to .debug_.* with the SHF_COMPRESSED bit. * ld-elf/zlibnormal.rS: Likewise.
2015-07-08Clarify case requirements for gas pseudo-opsRichard Sandiford1-1/+2
gas/ 2015-07-08 Ciro Santilli <ciro.santilli@gmail.com> * doc/as.texinfo: Clarify case requirements for pseudo ops.
2015-06-24Remove the extra @section .cfi_lsdaH.J. Lu1-1/+0
Commit 2f0c68f23bb3132cd5ac466ca8775c0d9e4960cd added an extra @section .cfi_lsda: @subsection @code{.cfi_lsda @var{encoding} [, @var{exp}]} +@section @code{.cfi_lsda @var{encoding} [, @var{exp}]} @code{.cfi_lsda} defines LSDA and its encoding. It shouldn't be there. * doc/as.texinfo (.cfi_lsda): Remove the extra @section.
2015-06-17gas: section name substitution sequenceNicolas Pitre1-1/+41
This patch adds the ability to automatically construct a section name based on the prior section. When gas is invoked with --sectname-subst, the occurrence of %S in a section name will be substituted by the name of the current section. For example: .macro exception_code .pushsection %S.exception [exception code here] .popsection .endm .text [code] exception_code [...] .section .init [init code] exception_code [...] The first and second exception_code invocations create the .text.exception and the .init.exception sections respectively. This is useful e.g. to discriminate between anciliary sections that are tied to .init code and can be discarded at run time when initialization is over vs anciliary sections tied to .text sections that need to stay resident. * as.c (show_usage): Document --sectname-subst. (parse_args): Add --sectname-subst. * as.h (flag_sectname_subst): New. * config/obj-elf.c (obj_elf_section_name): Add %S substitution. * doc/as.texinfo: Document it.
2015-05-28Compact EH SupportCatherine Moore1-3/+41
The specification for the Compact EH format is available at: https://github.com/MentorEmbedded/cxx-abi/blob/master/MIPSCompactEH.pdf 2015-05-28 Catherine Moore <clm@codesourcery.com> Bernd Schmidt <bernds@codesourcery.com> Paul Brook <paul@codesourcery.com> bfd/ * bfd-in2.h: Regenerated. * elf-bfd.h (DWARF2_EH_HDR, COMPACT_EH_HDR): Define. (COMPACT_EH_CANT_UNWIND_OPCODE): Define. (dwarf_eh_frame_hdr_info): Move dwarf-specific fields from eh_frame_hdr_info. (compact_eh_frame_hdr_info): Declare. (eh_frame_hdr_info): Redeclare with union for dwarf-specific fields and compact-eh fields. (elf_backend_data): Add cant_unwind_opcode and compact_eh_encoding. (bfd_elf_section_data): Add eh_frame_entry_field. (elf_section_eh_frame_entry): Define. (bfd_elf_parse_eh_frame_entries): Declare. (_bfd_elf_parse_eh_frame_entry): Declare. (_bfd_elf_end_eh_frame_parsing): Declare. (_bfd_elf_write_section_eh_frame_entry): Declare. (_bfd_elf_eh_frame_entry_present): Declare. (_bfd_elf_section_for_symbol): Declare. * elf-eh-frame.c (bfd_elf_discard_eh_frame_entry): New function. (bfd_elf_record_eh_frame_entry): New function. (_bfd_elf_parse_eh_frame_entry): New function. (_bfd_elf_parse_eh_frame): Update hdr_info field references. (cmp_eh_frame_hdr): New function. (add_eh_frame_hdr_terminator): New function. (_bfd_elf_end_eh_frame_parsing): New function. (find_merged_cie): Update hdr_info field references. (_bfd_elf_discard_section_eh_frame): Likewise. (_bfd_elf_discard_section_eh_frame_hdr): Add Compact EH support. (_bfd_elf_eh_frame_entry_present): New function. (_bfd_elf_maybe_strip_eh_frame_hdr): Add Compact EH support. (_bfd_elf_write_section_eh_frame_entry): New function. (_bfd_elf_write_section_eh_frame): Update hdr_info field references. (_bfd_elf_fixup_eh_frame_hdr): New function. (write_compact_eh_frame_hdr): New function. (write_dwarf_eh_frame_hdr): New function. (_bfd_elf_write_section_eh_frame_hdr): Add Compact EH support. * elflink.c (_bfd_elf_section_for_symbol): New function. (elf_section_ignore_discarded_relocs): Add Compact EH support. (elf_link_input_bfd): Likewise. (bfd_elf_final_link): Likewise. (_bfd_elf_gc_mark): Likewise. (bfd_elf_parse_eh_frame_entries): New function. (bfd_elf_gc_sections): Add Compact EH support. (bfd_elf_discard_info): Likewise. * elfxx-mips.c: Include dwarf2.h. (_bfd_mips_elf_compact_eh_encoding): New function. (_bfd_mips_elf_cant_unwind_opcode): New function. * elfxx-mips.h (_bfd_mips_elf_compact_eh_encoding): Declare. (_bfd_mips_elf_cant_unwind_opcode): Declare. (elf_backend_compact_eh_encoding): Define. (elf_backend_cant_unwind_opcode): Define. * elfxx-target.h (elf_backend_compact_eh_encoding): Provide default. (elf_backend_cant_unwind_opcode): Provide default. (elf_backend_data elfNN_bed): Add elf_backend_compact_eh_encoding and elf_backend_cant_unwind_opcode. * section.c (SEC_INFO_TYPE_EH_FRAME_ENTRY): Add definition. gas/ * config/tc-alpha.c (all_cfi_sections): Declare. (s_alpha_ent): Initialize all_cfi_sections. (alpha_elf_md_end): Invoke cfi_set_sections. * config/tc-mips.c (md_apply_fix): Handle BFD_RELOC_NONE. (s_ehword): Use BFD_RELOC_32_PCREL. (mips_fix_adjustable): Handle BFD_RELOC_32_PCREL. (mips_cfi_reloc_for_encoding): New function. * tc-mips.h (DWARF2_FDE_RELOC_SIZE): Redefine. (DWARF2_FDE_RELOC_ENCODING): Define. (tc_cfi_reloc_for_encoding): Define. (mips_cfi_reloc_for_encoding): Define. (tc_compact_eh_opcode_stop): Define. (tc_compact_eh_opcode_pad): Define. * doc/as.texinfo: Document Compact EH extensions. * doc/internals.texi: Likewise. * dw2gencfi.c (EH_FRAME_LINKONCE): Redefine. (tc_cfi_reloc_for_encoding): Provide default. (compact_eh): Declare. (emit_expr_encoded): New function. (get_debugseg_name): Add Compact EH support. (alloc_debugseg_item): Likewise. (cfi_set_sections): New function. (dot_cfi_fde_data): New function. (dot_cfi_personality_id): New function. (dot_cfi_inline_lsda): New function. (cfi_pseudo_table): Add cfi_fde_data, cfi_personality_id, and cfi_inline_lsda. (dot_cfi_personality): Add Compact EH support. (dot_cfi_lsda): Likewise. (dot_cfi_sections): Likewise. (dot_cfi_startproc): Likewise. (get_cfi_seg): Likewise. (output_compact_unwind_data): New function. (output_cfi_insn): Add Compact EH support. (output_cie): Likewise. (output_fde): Likewise. (cfi_finish): Likewise. (cfi_emit_eh_header): New function. (output_eh_header): New function. * dw2gencfi.h (cfi_set_sections): Declare. (SUPPORT_COMPACT_EH): Define. (MULTIPLE_FRAME_SECTIONS): Define. New enumeration to describe the Compact EH header format. (fde_entry): Add new fields personality_id, eh_header_type, eh_data_size, eh_data, eh_loc and sections. (CFI_EMIT_eh_frame, CFI_EMIT_debug_frame, CFI_EMIT_target, CFI_EMIT_eh_frame_compact): Define. 2015-05-22 Catherine Moore <clm@codesourcery.com> Bernd Schmidt <bernds@codesourcery.com> gas/testsuite/ * gas/mips/mips.exp: Run new tests. * gas/mips/compact-eh-1.s: New file. * gas/mips/compact-eh-2.s: New file. * gas/mips/compact-eh-3.s: New file. * gas/mips/compact-eh-4.s: New file. * gas/mips/compact-eh-5.s: New file. * gas/mips/compact-eh-6.s: New file. * gas/mips/compact-eh-7.s: New file. * gas/mips/compact-eh-eb-1.d: New file. * gas/mips/compact-eh-eb-2.d: New file. * gas/mips/compact-eh-eb-3.d: New file. * gas/mips/compact-eh-eb-4.d: New file. * gas/mips/compact-eh-eb-5.d: New file. * gas/mips/compact-eh-eb-6.d: New file. * gas/mips/compact-eh-eb-7.d: New file. * gas/mips/compact-eh-el-1.d: New file. * gas/mips/compact-eh-el-2.d: New file. * gas/mips/compact-eh-el-3.d: New file. * gas/mips/compact-eh-el-4.d: New file. * gas/mips/compact-eh-el-5.d: New file. * gas/mips/compact-eh-el-6.d: New file. * gas/mips/compact-eh-el-7.d: New file. * gas/mips/compact-eh-err1.l: New file. * gas/mips/compact-eh-err1.s: New file. * gas/mips/compact-eh-err2.l: New file. * gas/mips/compact-eh-err2.s: New file. 2015-05-22 Catherine Moore <clm@codesourcery.com> include/ * bfdlink.h: Rename eh_frame_hdr to eh_frame_hdr_type. 2015-05-22 Catherine Moore <clm@codesourcery.com> Paul Brook <paul@codesourcery.com> ld/ * emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Add Compact EH support. * scripttempl/elf.sc: Handle .eh_frame_entry and .gnu_extab sections. 2015-05-22 Catherine Moore <clm@codesourcery.com> ld/testsuite/ * ld-mips-elf/compact-eh.ld: New linker script. * ld-mips-elf/compact-eh1.d: New. * ld-mips-elf/compact-eh1.s: New. * ld-mips-elf/compact-eh1a.s: New. * ld-mips-elf/compact-eh1b.s: New. * ld-mips-elf/compact-eh2.d: New. * ld-mips-elf/compact-eh2.s: New. * ld-mips-elf/compact-eh3.d: New. * ld-mips-elf/compact-eh3.s: New. * ld-mips-elf/compact-eh3a.s: New. * ld-mips-elf/compact-eh4.d: New. * ld-mips-elf/compact-eh5.d: New. * ld-mips-elf/compact-eh6.d: New. * ld-mips-elf/mips-elf.exp: Run new tests.
generated by cgit v1.1 at 2024-12-26 22:40:40 +0000