aboutsummaryrefslogtreecommitdiff
path: root/gas/config
AgeCommit message (Collapse)AuthorFilesLines
2016-02-25Convert more variables to a constant form.Trevor Saunders37-124/+124
* as.c (select_emulation_mode): Add const qualifiers. * as.h: Likewise. * config/bfin-defs.h: Likewise. * config/bfin-parse.y: Likewise. * config/rx-parse.y: Likewise. * config/tc-aarch64.c (struct aarch64_option_table): Likewise. (struct aarch64_cpu_option_table): Likewise. (struct aarch64_arch_option_table): Likewise. (struct aarch64_option_cpu_value_table): Likewise. (struct aarch64_long_option_table): Likewise. (struct aarch64_option_abi_value_table): Likewise. * config/tc-arm.c (struct reloc_entry): Likewise. (tc_gen_reloc): Likewise. (struct arm_option_table): Likewise. (struct arm_legacy_option_table): Likewise. (struct arm_cpu_option_table): Likewise. (struct arm_arch_option_table): Likewise. (struct arm_option_extension_value_table): Likewise. (struct arm_option_fpu_value_table): Likewise. (struct arm_option_value_table): Likewise. (struct arm_long_option_table): Likewise. * config/tc-avr.c (struct avr_opcodes_s): Likewise. (struct mcu_type_s): Likewise. (struct exp_mod_s): Likewise. (avr_operand): Likewise. (avr_operands): Likewise. * config/tc-d10v.c (md_begin): Likewise. * config/tc-dlx.c: Likewise. * config/tc-fr30.c (fr30_is_colon_insn): Likewise. * config/tc-ft32.c (parse_condition): Likewise. * config/tc-h8300.c (do_a_fix_imm): Likewise. * config/tc-hppa.c (pa_ip): Likewise. (hppa_regname_to_dw2regnum): Likewise. * config/tc-i370.c (i370_elf_suffix): Likewise. * config/tc-i960.c (struct tabentry): Likewise. * config/tc-m32r.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * config/tc-mcore.c (parse_psrmod): Likewise. * config/tc-metag.c (struct metag_core_option): Likewise. (struct metag_long_option): Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mips.c (macro): Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-msp430.c (struct rcodes_s): Likewise. (struct hcodes_s): Likewise. (md_parse_option): Likewise. * config/tc-ns32k.c (struct ns32k_option): Likewise. (optlist): Likewise. * config/tc-ppc.c (ppc_elf_suffix): Likewise. (tc_ppc_regname_to_dw2regnum): Likewise. * config/tc-ppc.h: Likewise. * config/tc-rl78.c: Likewise. * config/tc-rx.c (struct cpu_type): Likewise. * config/tc-sh.c (sh_regname_to_dw2regnum): Likewise. * config/tc-sparc.c (struct priv_reg_entry): Likewise. (sparc_ip): Likewise. * config/tc-spu.c (insn_fmt_string): Likewise. * config/tc-tic54x.c (tic54x_set_default_include): Likewise. * config/tc-v850.c: Likewise. * config/tc-visium.c (struct visium_arch_option_table): Likewise. (struct visium_long_option_table): Likewise. * config/tc-xgate.c: Likewise. * config/tc-z8k.c: Likewise. * read.c (add_include_dir): Likewise. * read.h: Likewise.
2016-02-24[GAS][ARM][3/3]Add armv8.2 fp16 scalar instruction support. Based on SE_H ↵Renlin Li1-39/+236
instruction shape. gas/ 2016-02-24 Renlin Li <renlin.li@arm.com> * config/tc-arm.c (BAD_FP16): New error message macro. (do_scalar_fp16_v82_encode): Change the coproc field to 9 for armv8.2 fp16 scalar instructions. (neon_check_type): Allow different size from key. (do_vfp_nsyn_add_sub): Add support SE_H shape support. (try_vfp_nsyn): Likewise. (do_vfp_nsyn_mla_mls): Likewise. (do_vfp_nsyn_fma_fms): Likewise. (do_vfp_nsyn_ldm_stm): Likewise (do_vfp_nsyn_sqrt): Likewise (do_vfp_nsyn_div): Likewise (do_vfp_nsyn_nmul): Likewise. (do_vfp_nsyn_cmp): Likewise. (do_neon_shll): Likewise. (do_vfp_nsyn_cvt_fpv8): Likewise. (do_neon_cvttb_2): Likewise. (do_neon_mov): Likewise. (do_neon_rshift_round_imm): Likewise. (do_neon_ldr_str): Likewise. (do_vfp_nsyn_fpv8): Likewise. (do_vmaxnm): Likewise. (do_vrint_1): Likewise. (insns): New entry for vins, vmovx. (md_apply_fix): Left shift 1 bit for fp16 vldr/vstr. * testsuite/gas/arm/armv8-2-fp16-scalar-thumb.d: New. * testsuite/gas/arm/armv8-2-fp16-scalar.d: New. * testsuite/gas/arm/armv8-2-fp16-scalar.s: New. * testsuite/gas/arm/armv8-2-fp16-scalar-bad.s: New * testsuite/gas/arm/armv8-2-fp16-scalar-bad.d: New * testsuite/gas/arm/armv8-2-fp16-scalar-bad.l: New
2016-02-24[GAS][ARM][2/3]Add SE_H shape to represent fp16 type.Renlin Li1-7/+72
gas/ 2016-02-24 Renlin Li <renlin.li@arm.com> * config/tc-arm.c (NEON_ENC_TAB): Add fp16 instruction shape. (neon_shape_class): New SC_HALF. (neon_shape_el): New SE_H. (neon_shape_el_size): New size for SE_H. (N_F_ALL): New macro to aggregate N_F16, N_F32, N_64. (neon_select_shape): Add SE_H support code. (el_type_of_type_chk): Use N_F_ALL. (do_vfp_nsyn_cvt): Add SE_H shape support. (do_neon_cvtz): Likewise. (do_neon_cvt_1): Likewise. (do_neon_cvttb_1): Likewise.
2016-02-24[ARM][gas] Add support for Cortex-A32Kyrylo Tkachov1-0/+2
2016-02-24 Kyrylo Tkachov <kyrylo.tkachov@arm.com> * config/tc-arm.c (arm_cpus): Add entry for cortex-a32. * doc/c-arm.texi (ARM Options): Document cortex-a32.
2016-02-22Add more const type qualifiers to GAS sources.Trevor Saunders21-68/+61
* output-file.c (output_file_create): Make file name argument const. (output_file_close): Likewise. * output-file.h (output_file_create): Adjust. (output_file_close): Likewise. * depend.c (quote_string_for_make): Make src argument const char *. (register_dependency): Likewise. (wrap_output): Likewise. * as.h (register_dependency): Adjust. * config/tc-xtensa.c (finish_vinsn): Remove unnecessary calls to as_where (); * symbols.c (S_SET_EXTERNAL): Likewise. * input-scrub.c (as_where): Return the file name. * as.h (as_where): Adjust prototype. * app.c (do_scrub_chars): Adjust. * cond.c (s_elseif): Likewise. (s_else): Likewise. (initialize_cframe): Likewise. * config/obj-coff.c (obj_coff_init_stab_section): Likewise. * config/obj-elf.c (obj_elf_init_stab_section): Likewise. * config/obj-som.c (obj_som_init_stab_section): Likewise. * config/tc-aarch64.c (output_info): Likewise. * config/tc-ia64.c (md_assemble): Likewise. (dot_alias): Likewise. * config/tc-m68k.c (m68k_frob_label): Likewise. * config/tc-mmix.c (s_bspec): Likewise. (mmix_handle_mmixal): Likewise. * config/tc-rx.c (rx_include): Likewise. * config/tc-tic54x.c (tic54x_set_default_include): Likewise. (tic54x_adjust_symtab): Likewise. * config/tc-xtensa.c (directive_push): Likewise. (xtensa_sanity_check): Likewise. (xtensa_relax_frag): Likewise. (md_convert_frag): Likewise. (tinsn_to_slotbuf): Likewise. * dwarf2dbg.c (dwarf2_where): Likewise. * ecoff.c (add_file): Likewise. (ecoff_generate_asm_lineno): Likewise. * expr.c (make_expr_symbol): Likewise. * frags.c (frag_new): Likewise. (frag_var_init): Likewise. * listing.c (listing_newline): Likewise. * messages.c (identify): Likewise. (as_show_where): Likewise. (as_warn_internal): Likewise. (as_bad_internal): Likewise. * read.c (s_irp): Likewise. (s_macro): Likewise. (s_reloc): Likewise. * stabs.c (stabs_generate_asm_file): Likewise. (stabs_generate_asm_lineno): Likewise. (stabs_generate_asm_func): Likewise. * write.c (fix_new_internal): Likewise. * as.h (PRINTF_WHERE_LIKE): Make file name argument const. (as_warn_value_out_of_range): Adjust prototype. (as_bad_value_out_of_range): Adjust prototype. * messages.c (identify): Make file name argument const char *. (as_warn_internal): Likewise. (as_warn_where): Likewise. (as_bad_internal): Likewise. (as_bad_where): Likewise. (as_internal_value_out_of_range): Likewise. (as_warn_value_out_of_range): Likewise. (as_bad_value_out_of_range): Likewise. * as.h (found_comment_file): Change type to const char *. * cond.c (file_line::file): Likewise. * config/obj-coff.c (obj_coff_init_stab_section): Make variable const. * config/obj-elf.c (obj_elf_init_stab_section): Likewise. * config/obj-som.c (obj_som_init_stab_section): Likewise. * config/tc-aarch64.c (output_info): Likewise. * config/tc-alpha.c (insert_operand): Likewise. * config/tc-arc.c (insert_operand): Likewise. * config/tc-d30v.c (check_size): Likewise. * config/tc-ia64.c (struct alias): Likewise. * config/tc-m68k.c (struct label_line): Likewise. * config/tc-mcore.c (md_apply_fix): Likewise. * config/tc-microblaze.c (md_estimate_size_before_relax): Likewise. * config/tc-mips.c (mips16_immed): Likewise. * config/tc-mmix.c (mmix_handle_mmixal): Likewise. * config/tc-ppc.c (ppc_insert_operand): Likewise. * config/tc-rx.c (rx_include): Likewise. * config/tc-s390.c (s390_insert_operand): Likewise. * config/tc-tic54x.c (tic54x_set_default_include): Likewise. (tic54x_adjust_symtab): Likewise. * config/tc-tilegx.c (insert_operand): Likewise. (apply_special_operator): Likewise. * config/tc-tilepro.c (insert_operand): Likewise. * config/tc-xtensa.c (directive_push): Likewise. * ecoff.c (add_file): Likewise. (ecoff_generate_asm_lineno): Likewise. * listing.c (listing_newline): Likewise. * read.c (s_irp): Likewise. * write.c (install_reloc): Likewise. * write.h (struct fix): Likewise. * input-file.c (file_name): Change type to const char *. (saved_file::file_name): Likewise. (input_file_open): Change type of argument to const char *. * input-file.h (input_file_open): Adjust. * input-scrub.c (logical_input_file): change type to const char *. (physical_input_file): Likewise. (struct input_save): Adjust. (input_scrub_push): Adjust. (input_scrub_begin): Adjust. (as_where): Adjust. * input-scrub.c (input_scrub_new_file): Make file name argument const. (input_scrub_include_file): Likewise. (new_logical_line_flags): Likewise. (new_logical_line): Likewise. * as.h: Adjust. * frags.h (struct frag): Change type of fr_file to const char *. * expr.c (expr_symbol_where): Change type of file argument to const char **. * expr.h (expr_symbol_where): Likewise. * config/tc-i370.c (md_apply_fix): adjust. * config/tc-mmix.c (mmix_md_end): Likewise. * config/tc-ppc.c (md_apply_fix): Likewise. * config/tc-s390.c (md_apply_fix): Likewise. * symbols.c (report_op_error): Likewise. (resolve_symbol_value): Likewise. * config/tc-ia64.c (slot::src_file): Change type to const char *. (rsrc::file): Likewise. * config/tc-xtensa.c (xtensa_sanity_check): Change type of variable to const char *. (xtensa_relax_frag): Likewise. (md_convert_frag): Likewise. (tinsn_to_slotbuf): Likewise. * expr.c (expr_symbol_line): Likewise. * macro.c (define_macro): Likewise. * macro.h (macro_struct): Likewise. * messages.c (as_show_where): Likewise. * read.c (s_macro): Likewise. * stabs.c (stabs_generate_asm_file): Likewise. (generate_asm_file): Likewise. (stabs_generate_asm_lineno): Likewise. * write.h (struct reloc_list): Likewise. * input-scrub.c (as_where): Change return type to const char *. * as.h (as_wheree): Adjust.
2016-02-20[i386] Check RegVRex in register_numberH.J. Lu1-0/+3
Increment register number by 16 if RegVRex is set. * config/tc-i386.c (register_number): Check RegVRex. * testsuite/gas/i386/x86-64-avx512f.s: Add a test for vgatherqpd with %zmm19 and %zmm3. * testsuite/gas/i386/x86-64-avx512f-intel.d: Updated. * testsuite/gas/i386/x86-64-avx512f.d: Likewise.
2016-02-19[ARM] Add FP16 feature extension for ARMv8.2 architectureJiong Wang1-0/+6
include/ * opcode/arm.h (ARM_EXT2_FP16_INSN): New. gas/ * config/tc-arm.c (arm_ext_fp16): New. (arm_extensions): New entry for "fp16".
2016-02-17xtensa: fix .init/.fini literals movingMax Filippov1-2/+10
Despite the documentation and the comment in xtensa_move_literals, in the presence of --text-section-literals and --auto-litpools literals are moved from the separate literal sections into .init and .fini, because the check in the xtensa_move_literals is incorrect. This moving was broken with introduction of auto litpools: some literals now may be lost. This happens because literal frags emitted from .init and .fini are not closed when new .literal_position marks new literal pool. Then frag_align(2, 0, 0) changes type of the last literal frag to rs_align. rs_align frags are skipped in the xtensa_move_literals. As a result fixups against such literals are not moved out of .init.literal/ .fini.literal sections producing the following assembler error: test.S: Warning: fixes not all moved from .init.literal test.S: Internal error! Fix check for .init.literal/.fini.literal in the xtensa_move_literals and don't let it move literals from there in the presence of --text-section-literals or --auto-litpools. 2016-02-17 Max Filippov <jcmvbkbc@gmail.com> gas/ * config/tc-xtensa.c (xtensa_move_literals): Fix check for .init.literal/.fini.literal section name. * testsuite/gas/xtensa/all.exp: Add init-fini-literals to the list of xtensa tests. * testsuite/gas/xtensa/init-fini-literals.d: New file: init-fini-literals test result patterns. * testsuite/gas/xtensa/init-fini-literals.s: New file: init-fini-literals test.
2016-02-17Update list of known MSP430 MCUs.Nick Clifton1-1/+15
* config/tc-msp430.c (msp430_mcu_data): Sync with data from TI's devices.csv file as of March 2016.
2016-02-16[ARC] Enable .cfi_* pseudo-ops.Claudiu Zissulescu2-0/+31
gas/ 2016-02-16 Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (tc_arc_frame_initial_instructions): New function. (tc_arc_regname_to_dw2regnum): Likewise. * config/tc-arc.h (TARGET_USE_CFIPOP): Define (tc_cfi_frame_initial_instructions): Likewise. (tc_regname_to_dw2regnum): Likewise. gas/testsuite 2016-02-16 Claudiu Zissulescu <claziss@synopsys.com> * gas/cfi/cfi-arc-1.d: New file. * gas/cfi/cfi-arc-1.s: Likewise. * gas/cfi/cfi.exp: Allow running tests for arc. binutils/ 2016-02-16 Claudiu Zissulescu <claziss@synopsys.com> * readelf.c (is_32bit_pcrel_reloc): Add R_ARC_32_PCREL.
2016-02-16[PR19620][GAS][AArch64]Remove mov[z,k,n] relocation symbol name restriction.Renlin Li1-9/+1
In AArch64 gas, register name or string starts with valid register name is not allowed as symbol name for mov[z,k,n] instruction. This patch removes the restriction. gas/ PR gas/19620 * config/tc-aarch64.c (parse_half): Remove restrictions on symbol name. * testsuite/gas/aarch64/movw_label.d: New. * testsuite/gas/aarch64/movw_label.s: New.
2016-02-15Correct opcode generated for RX indirect MOVs without an offset.Vinay Kumar G1-0/+9
PR gas/19665 * config/rx-parse.y (MOV): Opcode generation for index register addressing mode. * testsuite/gas/rx/rx.exp: Updated for new testcase. * testsuite/gas/rx/pr19665.s: New file. * testsuite/gas/rx/pr19665.s: New file. * testsuite/gas/rx/mov.d: Update expected output.
2016-02-15Enhance GAS's .section directive so that it can take numeric values for the ↵Nick Clifton2-9/+49
flags and type fields. (ELF only) gas * doc/as.texinfo (.section): Document that numeric values can now be used for the flags and type fields of the ELF target's .section directive. Add notes about the restrictions on setting flags and types. * config/obj-elf.c (obj_elf_change_section): Allow known sections to be given processor specific section types. Allow processor and application specific flags of a section to be set after definition. (obj_elf_parse_section_letters): Handle parsing numeric values. (obj_elf_section_type): Handle parsing numeric values. (obj_elf_section): Allow numeric type values. * config/obj-elf.h (obj_elf_change_section): Update prototype. * testsuite/gas/elf/section10.d: New test. * testsuite/gas/elf/section10.s: Source file for new test. * testsuite/gas/elf/elf.exp: Run the new test. * testsuite/gas/i386/ilp32/x86-64-unwind.d: Remove dependency upon the description of the flags produced by readelf. * testsuite/gas/tic6x/scomm-directive-4.d: Likewise. * NEWS: Mention the new feature. bfd * elf-bfd.h (struct bfd_elf_special_section): Use unsigned values for length and type fields. Use a signed value for the suffix_length field. binutils* readelf.c (get_section_type_name): Add hex prefix to offsets printed for LOPROC and LOOS values. Ensure that a result is always returned for the V850 target, even when an unrecognised processor specific value is encountered. (process_section_headers): Display key values in the order in which they appear to the user. Add the "C (compressed)" value to the list. ld * testsuite/ld-i386/pr12718.d: Remove dependency upon the description of the flags produced by readelf. * testsuite/ld-i386/pr12921.d: Likewise. * testsuite/ld-i386/tlsbin-nacl.rd: Likewise. * testsuite/ld-i386/tlsbin.rd: Likewise. * testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsbindesc.rd: Likewise. * testsuite/ld-i386/tlsdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsdesc.rd: Likewise. * testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsgdesc.rd: Likewise. * testsuite/ld-i386/tlsnopic-nacl.rd: Likewise. * testsuite/ld-i386/tlsnopic.rd: Likewise. * testsuite/ld-i386/tlspic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic.rd: Likewise. * testsuite/ld-s390/tlsbin.rd: Likewise. * testsuite/ld-s390/tlsbin_64.rd: Likewise. * testsuite/ld-s390/tlspic.rd: Likewise. * testsuite/ld-s390/tlspic_64.rd: Likewise. * testsuite/ld-sh/tlsbin-2.d: Likewise. * testsuite/ld-sh/tlspic-2.d: Likewise. * testsuite/ld-tic6x/common.d: Likewise. * testsuite/ld-tic6x/shlib-1.rd: Likewise. * testsuite/ld-tic6x/shlib-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-noindex.rd: Likewise. * testsuite/ld-tic6x/static-app-1.rd: Likewise. * testsuite/ld-tic6x/static-app-1b.rd: Likewise. * testsuite/ld-tic6x/static-app-1r.rd: Likewise. * testsuite/ld-tic6x/static-app-1rb.rd: Likewise. * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise. * testsuite/ld-x86-64/ilp32-4.d: Likewise. * testsuite/ld-x86-64/pr12718.d: Likewise. * testsuite/ld-x86-64/pr12921.d: Likewise. * testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise. * testsuite/ld-x86-64/split-by-file.rd: Likewise. * testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc.rd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsdesc.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc.rd: Likewise. * testsuite/ld-x86-64/tlspic-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic.rd: Likewise. * testsuite/ld-xtensa/tlsbin.rd: Likewise. * testsuite/ld-xtensa/tlspic.rd: Likewise.
2016-02-10Add support for ARC instruction relaxation in the assembler.Claudiu Zissulescu2-957/+1480
gas/ 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> Janek van Oirschot <jvanoirs@synopsys.com> * config/tc-arc.h (TC_FRAG_TYPE, TC_PCREL_ADJUST, MAX_INSN_ARGS) (MAX_INSN_FLGS, MAX_FLAG_NAME_LENGHT, TC_GENERIC_RELAX_TABLE): Define. (arc_flags, arc_relax_type): New structure. * config/tc-arc.c (FRAG_MAX_GROWTH, RELAX_TABLE_ENTRY) (RELAX_TABLE_ENTRY_MAX): New define. (relaxation_state, md_relax_table, arc_relaxable_insns) (arc_num_relaxable_ins): New variable. (rlx_operand_type, arc_rlx_types): New enums. (arc_relaxable_ins): New structure. (OPTION_RELAX): New option. (arc_insn): New relax member. (arc_flags): Remove. (relax_insn_p): New function. (apply_fixups): Likewise. (relaxable_operand): Likewise. (may_relax_expr): Likewise. (relaxable_flag): Likewise. (arc_pcrel_adjust): Likewise. (md_estimate_size_before_relax): Implement. (md_convert_frag): Likewise. (md_parse_option): Handle new mrelax option. (md_show_usage): Likewise. (assemble_insn): Set relax member. (emit_insn0): New function. (emit_insn1): Likewise. (emit_insn): Handle relaxation case. * NEWS: Mention the new relaxation option. * doc/c-arc.texi (ARC Options): Document new mrelax option. gas/testsuite 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> * gas/arc/relax-avoid1.d: New file. * gas/arc/relax-avoid1.s: Likewise. * gas/arc/relax-avoid2.d: Likewise. * gas/arc/relax-avoid2.s: Likewise. * gas/arc/relax-avoid3.d: Likewise. * gas/arc/relax-avoid3.s: Likewise. * gas/arc/relax-b.d: Likewise. * gas/arc/relax-b.s: Likewise. include/opcode/ 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> Janek van Oirschot <jvanoirs@synopsys.com> * arc.h (arc_opcode arc_relax_opcodes, arc_num_relax_opcodes): Declare. opcodes/ 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> Janek van Oirschot <jvanoirs@synopsys.com> * arc-opc.c (arc_relax_opcodes, arc_num_relax_opcodes): New variable.
2016-02-08FIx formatting that triggers a new compile time warning message.Nick Clifton1-2/+3
* config/tc-ia64.c (dot_prologue): Fix formatting.
2016-02-04Remove support for creating ARM NOREAD sections.Nick Clifton3-22/+0
gas * config/obj-elf.c (obj_elf_change_section): Remove support for ARM NOREAD sections. * config/tc-arm.c (arm_elf_section_letter): Delete. * config/tc-arm.h (md_elf_section_letter): Delete. * doc/c-arm.texi (ARM Section Attribute): Delete section. * testsuite/gas/arm/section-execute-only.d: Delete. * testsuite/gas/arm/section-execute-only.s: Delete. ld * testsuite/ld-arm/arm-elf.exp: Remove ARM NOREAD section tests. * testsuite/ld-arm/thumb1-input-section-flag-match.d: Delete. * testsuite/ld-arm/thumb1-input-section-flag-match.s: Delete. * testsuite/ld-arm/thumb1-noread-not-present-mixing-two-section.d: Delete. * testsuite/ld-arm/thumb1-noread-not-present-mixing-two-section.s: Delete. * testsuite/ld-arm/thumb1-noread-present-one-section.d: Delete. * testsuite/ld-arm/thumb1-noread-present-one-section.s: Delete. * testsuite/ld-arm/thumb1-noread-present-two-section.d: Delete. * testsuite/ld-arm/thumb1-noread-present-two-section.s: Delete.
2016-02-04Fix the encoding of the MSP430's RRUX instruction.Nick Clifton1-57/+3
PR target/19561 opcdoe * msp430-dis.c (print_insn_msp430): Add a special case for decoding an RRC instruction with the ZC bit set in the extension word. include * opcode/msp430.h (IGNORE_CARRY_BIT): New define. (RRUX): Synthesise using case 2 rather than 7. gas * config/tc-msp430.c (msp430_operands): Remove case 7. Use case 2 to handle encoding of RRUX instruction. * testsuite/gas/msp430/msp430x.s: Add more tests of the extended shift instructions. * testsuite/gas/msp430/msp430x.d: Update expected disassembly.
2016-02-03xtensa: fix signedness of gas relocationsMax Filippov1-3/+3
Change 1058c7532d0b "Use signed data type for R_XTENSA_DIFF* relocation offsets." changed signedness of BFD_RELOC_XTENSA_DIFF* relocations substituted for BFD_RELOC_*. This made it impossible to encode arbitrary 8-, 16- and 32-bit values, which broke e.g. debug info encoding by .loc directive. Revert this part and add test. gas/ 2016-02-03 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (md_apply_fix): Mark BFD_RELOC_XTENSA_DIFF* substitutions for BFD_RELOC_* as unsigned. * gas/testsuite/gas/xtensa/all.exp: Add loc to list of xtensa tests. * gas/testsuite/gas/xtensa/loc.d: New file: loc test result patterns. * gas/testsuite/gas/xtensa/loc.s: New file: loc test.
2016-02-03Add -mrelax-relocations= to x86 assemblerH.J. Lu1-3/+27
The x86 relax relocations introduced in binutils 2.26 aren't supported by linker on Solaris older than Solaris 12. To use x86 assembler with older Solaris linker, this patch adds 1. A command line option -mrelax-relocations= to x86 assembler to control whether to generate relax relocations. 2. A configure option --enable-x86-relax-relocations to decide whether x86 assembler should generate relax relocations by default. It is defaulted to yes, except for x86 Solaris targets older than Solaris 12. gas/ PR gas/19520 * NEWS: Mention new command line option -mrelax-relocations and new configure option --enable-x86-relax-relocations for x86 target. * config.in: Regenerated. * configure.ac: Add --enable-x86-relax-relocations. (ac_default_x86_relax_relocations): New. Default to 1 except for x86 Solaris targets older than Solaris 12. (DEFAULT_GENERATE_X86_RELAX_RELOCATIONS): Define. * configure: Likewise. * config/tc-i386.c (generate_relax_relocations): New. (OPTION_MRELAX_RELOCATIONS): Likewise. (output_disp): Don't generate relax relocations if generate_relax_relocations is 0. (md_longopts): Add -mrelax-relocations. (md_show_usage): Likewise. (md_parse_option): Handle OPTION_MRELAX_RELOCATIONS. * doc/c-i386.texi: Document -mrelax-relocations=. * testsuite/gas/i386/got-no-relax.d: New file. * testsuite/gas/i386/x86-64-gotpcrel-no-relax.d: Likewise. * testsuite/gas/i386/got.d: Pass -mrelax-relocations=yes to as. * testsuite/gas/i386/localpic.d: Likewise. * testsuite/gas/i386/mixed-mode-reloc32.d: Likewise. * testsuite/gas/i386/reloc32.d: Likewise. * testsuite/gas/i386/x86-64-gotpcrel.d: Likewise. * testsuite/gas/i386/x86-64-localpic.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-gotpcrel.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-localpic.d: Likewise. * testsuite/gas/i386/i386.exp: Run got-no-relax and x86-64-gotpcrel-no-relax. ld/ PR gas/19520 * testsuite/ld-i386/branch1.d: Pass -mrelax-relocations=yes to as. * testsuite/ld-i386/call1.d: Likewise. * testsuite/ld-i386/call2.d: Likewise. * testsuite/ld-i386/call3a.d: Likewise. * testsuite/ld-i386/call3b.d: Likewise. * testsuite/ld-i386/call3c.d: Likewise. * testsuite/ld-i386/call3d.d: Likewise. * testsuite/ld-i386/call3e.d: Likewise. * testsuite/ld-i386/call3f.d: Likewise. * testsuite/ld-i386/call3g.d: Likewise. * testsuite/ld-i386/call3h.d: Likewise. * testsuite/ld-i386/jmp1.d: Likewise. * testsuite/ld-i386/jmp2.d: Likewise. * testsuite/ld-i386/lea1c.d: Likewise. * testsuite/ld-i386/load1.d: Likewise. * testsuite/ld-i386/load2.d: Likewise. * testsuite/ld-i386/load3.d: Likewise. * testsuite/ld-i386/load4a.d: Likewise. * testsuite/ld-i386/load5a.d: Likewise. * testsuite/ld-i386/mov2b.d: Likewise. * testsuite/ld-i386/mov3.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-x86-64.d: Likewise. * testsuite/ld-x86-64/call1a.d: Likewise. * testsuite/ld-x86-64/call1b.d: Likewise. * testsuite/ld-x86-64/call1c.d: Likewise. * testsuite/ld-x86-64/call1d.d: Likewise. * testsuite/ld-x86-64/call1e.d: Likewise. * testsuite/ld-x86-64/call1f.d: Likewise. * testsuite/ld-x86-64/call1h.d: Likewise. * testsuite/ld-x86-64/call1i.d: Likewise. * testsuite/ld-x86-64/load1a.d: Likewise. * testsuite/ld-x86-64/load1b.d: Likewise. * testsuite/ld-i386/got1a.S: Load GOT into %ecx and use it. * testsuite/ld-i386/got1.dd: Updated. * testsuite/ld-i386/got1d.S (1): Removed. * testsuite/ld-i386/i386.exp: Add -Wa,-mrelax-relocations=yes. * testsuite/ld-x86-64/x86-64.exp: Likewise.
2016-02-03msp430: Set DWARF2_ADDR_SIZE to 4.Kevin Buettner1-0/+2
This change makes gas's notion of the msp430 dwarf2 address size match that of gcc and gdb. This is needed so that the format of addresses generated for DW_LNE_set_address in .debug_line will match the address size for the compilation unit. In gcc/config/msp430/msp430.h, it's set to 4: #define DWARF2_ADDR_SIZE 4 Likewise in gdb/msp430-tdep.c: set_gdbarch_dwarf2_addr_size (gdbarch, 4); (As far as I can tell, however, GDB doesn't use this value when decoding .debug_line. Instead, GDB uses the Pointer Size from the compilation unit.) readelf is able to seamlessly handle mismatches between these various sizes by using the size of the DW_LNE_set_address instruction to determine the address size. Another way to fix this problem is to make GDB behave in a similar manner. In my opinion, GDB should detect and inform the user about these mismatches; it's not clear to me if it's correct for GDB to go ahead and read the address anyway when a size mismatch is detected. Without this change, addresses in .debug_line are encoded in two bytes for some multilibs. When GDB reads the address for DW_LNE_set_address, it uses the pointer size provided by the CU. When these values don't match, GDB reads the wrong number of bytes. In the cases that I've looked at, GDB is reading 4 bytes from a 2 byte container, which results in a garbage address. GDB discards lines which have a bogus address; the end result is that GDB records no line number information for CUs which have a mismatch between the address size (from the CU) and the format of the address used by DW_LNE_set_address. gas/ChangeLog: * config/tc-msp430.h (DWARF2_ADDR_SIZE): Set to 4.
2016-02-01Fix ARC TLS support.Claudiu Zissulescu1-2/+9
* config/tc-arc.c (md_apply_fix): Allow addendum. (arc_reloc_op): Allow complex expressions for tpoff. (md_apply_fix): Handle resolved TLS local symbol. * gas/arc/tls-relocs1.d: New file. * gas/arc/tls-relocs1.s: Likewise.
2016-02-01Fix a problem building the ARM assembler using LLVM.Loria1-1/+4
PR target/19311 * config/tc-arm.c (encode_arm_immediate): Recode to improve efficiency and avoid an LLVM loop optimization bug.
2016-02-01Fix error building Microblaze assembler on a 32-bit host.Nick Clifton1-2/+2
* config/tc-microblaze.c (parse_imm): Fix compile time warning message extending a negative 32-bit value into a larger signed value on a 32-bit host.
2016-01-29Add option -mfence-as-lock-add=[no|yes].Andrew Senkevich1-0/+35
With -mfence-as-lock-add=yes lfence, mfence and sfence will be encoded as lock addl $0x0, (%{r,e}sp). gas/: * config/tc-i386.c (avoid_fence): New. (output_insn): Encode as lock addl $0x0, (%{r,e}sp) if avoid_fence is true. (OPTION_FENCE_AS_LOCK_ADD): New. (md_longopts): Add -mfence-as-lock-add. (md_parse_option): Handle -mfence-as-lock-add. (md_show_usage): Add -mfence-as-lock-add=[no|yes]. * doc/c-i386.texi (-mfence-as-lock-add): Document. gas/testsuite/: * gas/i386/i386.exp: Run new tests. * gas/i386/fence-as-lock-add.s: New. * gas/i386/fence-as-lock-add-yes.d: Likewise. * gas/i386/fence-as-lock-add-no.d: Likewise. * gas/i386/x86-64-fence-as-lock-add-yes.d: Likewise. * gas/i386/x86-64-fence-as-lock-add-no.d: Likewise.
2016-01-25Rename OPTION_OMIT_LOCK_PREFIX to OPTION_MOMIT_LOCK_PREFIXH.J. Lu1-3/+3
Use OPTION_MXXX for -mxxx option in x86 assembler. * config/tc-i386.c (OPTION_OMIT_LOCK_PREFIX): Renamed to ... (OPTION_MOMIT_LOCK_PREFIX): This. (md_longopts): Updated. (md_parse_option): Likewise.
2016-01-25Avoid the use of gp-relative addressing when abicalls are in effect.Catherine Moore1-0/+6
2016-01-20Add support for an ARM specific 'y' section attribute flag to mark the ↵Mickael Guene3-0/+21
section as NOREAD. bfd/ChangeLog: * elf32-arm.c ((elf32_arm_special_sections): Remove catch of noread section using '.text.noread' pattern. gas/ChangeLog: * config/obj-elf.c (obj_elf_change_section) : Allow arm section with SHF_ARM_NOREAD section flag. * config/tc-arm.h (md_elf_section_letter) : Implement this hook to handle letter 'y'. (arm_elf_section_letter) : Declare it. * config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set SHF_ARM_NOREAD section flag. * doc/c-arm.texi (ARM section attribute 'y'): Document it. gas/testsuite/ChangeLog: * gas/arm/section-execute-only.s: New test case. * gas/arm/section-execute-only.d: Expected output. ld/testsuite/ChangeLog: * ld-arm/thumb1-noread-not-present-mixing-two-section.s: Add 'y' attribute usage. * ld-arm/thumb1-noread-present-one-section.s: Likewise. * ld-arm/thumb1-noread-present-two-section.s: Likewise. * ld-arm/thumb1-input-section-flag-match.s: Likewise. binutils/ChangeLog: * readelf.c (get_elf_section_flags): Display y letter for section with SHF_ARM_NOREAD section flag in readelf section output. (process_section_headers): Add y letter in readelf section output key mapping for ARM architecture.
2016-01-18MIPS: Remove remnants of 48-bit microMIPS instruction supportMaciej W. Rozycki1-4/+2
The POOL48A major opcode was defined in early revisions of the 64-bit microMIPS ISA, has never been implemented, and was removed before the 64-bit microMIPS ISA specification[1] has been finalized. This complements commit a6c7053929dd ("MIPS/opcodes: Remove microMIPS 48-bit LI instruction"). References: [1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64 Instruction Set", MIPS Technologies, Inc., Document Number: MD00594, Revision 3.06, October 17, 2012, Table 6.2 "microMIPS64 Encoding of Major Opcode Field", p. 578 gas/ * config/tc-mips.c (micromips_insn_length): Remove the mention of 48-bit microMIPS instructions. gdb/ * mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS instruction support. (micromips_next_pc): Likewise. (micromips_scan_prologue): Likewise. (micromips_deal_with_atomic_sequence): Likewise. (micromips_stack_frame_destroyed_p): Likewise. (mips_breakpoint_from_pc): Likewise. opcodes/ * mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS instruction support.
2016-01-13Nios II/GAS: Fix build error in `output_movia'Maciej W. Rozycki1-1/+1
Fix: cc1: warnings being treated as errors .../gas/config/tc-nios2.c: In function 'output_movia': .../gas/config/tc-nios2.c:3474: warning: 'code' may be used uninitialized in this function make[4]: *** [tc-nios2.o] Error 1 seen with GCC 4.1.2 and 4.4.7. gas/ * config/tc-nios2.c (output_movia): Preset `code' to 0.
2016-01-13Remove spurious condition in test for closing parenthesis.Yoshinori Sato1-1/+1
* config/tc-h8300.c (get_operand): Remove spurious condition in test for closing parenthesis.
2016-01-12[ARM] Support ARMv8.2 RAS extension.Matthew Wahab1-0/+9
The ARMv8.2 architecture includes the RAS extension which adds an instruction, ESB, and a number of coprocessor registers. This patch adds the instruction to binutils, making it available when -march=armv8.2-a is selected. It also adds tests for the instruction and for the coprocessor registers. gas/ 2016-01-12 Matthew Wahab <matthew.wahab@arm.com> * config/tc-arm.c (arm_ext_v8_2): New. (insns): Add "esb". * testsuite/gas/arm/armv8_2-a.d: New. * testsuite/gas/arm/armv8_2-a.s: New. opcodes/ 2016-01-12 Matthew Wahab <matthew.wahab@arm.com> * arm-dis.c (arm_opcodes): Add "esb". (thumb_opcodes): Likewise. Change-Id: I67f3d70789db78d1c66a56c4994675f99ac15e34
2016-01-01Copyright update for binutilsAlan Modra238-238/+238
2015-12-24Add assembler support for ARMv8-M BaselineThomas Preud'homme1-19/+89
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ (tag_cpu_arch_combine): Adjust comment in v4t_plus_v6_m with regards to merging with ARMv8-M Baseline. binutils/ * readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Baseline Tag_CPU_arch value. gas/ * config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions shared between ARMv6T2 and ARMv8-M. (move_or_literal_pool): Check mov.w/mvn and movw availability against arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking arm_arch_t2. (do_t_branch): Error out for wide conditional branch instructions if targetting ARMv8-M Baseline. (non_v6t2_wide_only_insn): Add the logic for new wide-only instructions in ARMv8-M Baseline. (wide_insn_ok): New function. (md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and adapt error message for unsupported wide instruction to ARMv8-M Baseline. (insns): Reorganize instructions shared by ARMv8-M Baseline and ARMv6t2 architecture. (arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and marvell-whitney cores. (arm_archs): Define armv8-m.base architecture. (cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version. (aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for ARMv8-M Mainline. Set Tag_DIV_use for ARMv8-M Baseline as well. gas/testsuite/ * gas/arm/archv8m-base.d: New file. * gas/arm/attr-march-armv8m.base.d: Likewise. * gas/arm/armv8m.base-idiv.d: Likewise. * gas/arm/any-armv8m.d: Adapt to deal with ARMv8-M Baseline. include/elf/ * arm.h (TAG_CPU_ARCH_V8M_BASE): Declare. include/opcode/ * arm.h (ARM_EXT2_V6T2_V8M): New extension bit. (ARM_AEXT2_V8A): New architecture extension bitfield. (ARM_AEXT2_V8_1A): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS. (ARM_AEXT_V8M_BASE): New architecture extension bitfield. (ARM_AEXT2_V8M): Add extension bit ARM_EXT2_V6T2_V8M. (ARM_ARCH_V6T2): Use ARM_EXT2_V6T2_V8M for the second extension bitfield. (ARM_ARCH_V6KT2): Likewise. (ARM_ARCH_V6ZT2): Likewise. (ARM_ARCH_V6KZT2): Likewise. (ARM_ARCH_V7): Likewise. (ARM_ARCH_V7A): Likewise. (ARM_ARCH_V7VE): Likewise. (ARM_ARCH_V7R): Likewise. (ARM_ARCH_V7M): Likewise. (ARM_ARCH_V7EM): Likewise. (ARM_ARCH_V8A): Likewise. (ARM_ARCH_V8M_BASE): New architecture bitfield. (ARM_ARCH_THUMB2): Include instructions shared by ARMv6t2 and ARMv8-M. (ARM_ARCH_V7A_SEC): Use ARM_EXT2_V6T2_V8M for the second extension bitfield and reindent. (ARM_ARCH_V7A_MP_SEC): Likewise. (ARM_ARCH_V7R_IDIV): Likewise. (ARM_ARCH_V8A_FP): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS. (ARM_ARCH_V8A_SIMD): Likewise. (ARM_ARCH_V8A_CRYPTOV1): Likewise. opcodes/ * arm-dis.c (arm_opcodes): Guard movw, movt cbz, cbnz, clrex, ldrex, ldrexb, ldrexh, strex, strexb, strexh shared by ARMv6T2 and ARMv8-M by ARM_EXT2_V6T2_V8M instead of ARM_EXT_V6T2.
2015-12-24Add assembler support for ARMv8-M MainlineThomas Preud'homme1-25/+70
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ (tag_cpu_arch_combine): Adjust v4t_plus_v6_m and comb array to account for new TAG_CPU_ARCH_V4T_PLUS_V6_M value. Deal with NULL values in comb array. binutils/ * readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Mainline Tag_CPU_arch value. (arm_attr_tag_THUMB_ISA_use): Add ARMv8-M Mainline Tag_THUMB_ISA_use value. gas/ * config/tc-arm.c (arm_ext_m): Include ARMv8-M. (arm_ext_v8m): New feature for ARMv8-M. (arm_ext_atomics): New feature for ARMv8 atomics. (do_tt): New encoding function for TT* instructions. (insns): Add new entries for ARMv8-M specific instructions and reorganize the ones shared by ARMv8-M Mainline and ARMv8-A. (arm_archs): Define armv8-m.main architecture. (cpu_arch_ver): Define ARM_ARCH_V8M_MAIN architecture version and clarify the ordering rule. (aeabi_set_public_attributes): Use TAG_CPU_ARCH_* macro to refer to Tag_CPU_arch values for ARMv7e-M detection. Add logic to keep setting Tag_CPU_arch to ARMv8-A for -march=all. Also set Tag_CPU_arch_profile to 'A' if extension bit for atomic instructions is set, unless it is ARMv8-M. Set Tag_THUMB_ISA_use to 3 for ARMv8-M. Set Tag_DIV_use to 0 for ARMv8-M Mainline. gas/testsuite/ * gas/arm/archv8m.s: New file. * gas/arm/archv8m-main.d: Likewise. * gas/arm/attr-march-armv8m.main.d: Likewise. * gas/arm/any-armv8m.s: Likewise. * gas/arm/any-armv8m.d: Likewise. include/elf/ * arm.h (TAG_CPU_ARCH_V8M_MAIN): Declare. (MAX_TAG_CPU_ARCH): Define to TAG_CPU_ARCH_V8M_MAIN. (TAG_CPU_ARCH_V4T_PLUS_V6_M): Define to unused value 15. include/opcode/ * arm.h (ARM_EXT2_ATOMICS): New extension bit. (ARM_EXT2_V8M): Likewise. (ARM_EXT_V8): Adjust comment with regards to atomics and remove mention of legacy use for that bit. (ARM_AEXT2_V8_1A): New architecture extension bitfield. (ARM_AEXT2_V8_2A): Likewise. (ARM_AEXT_V8M_MAIN): Likewise. (ARM_AEXT2_V8M): Likewise. (ARM_ARCH_V8A): Use ARM_EXT2_ATOMICS for features in second bitfield. (ARM_ARCH_V8_1A): Likewise with ARM_AEXT2_V8_1A. (ARM_ARCH_V8_2A): Likewise with ARM_AEXT2_V8_2A. (ARM_ARCH_V8M_MAIN): New architecture feature bitfield. (ARM_ARCH_V8A_FP): Use ARM_EXT2_ATOMICS for features in second bitfield and reindent. (ARM_ARCH_V8A_SIMD): Likewise. (ARM_ARCH_V8A_CRYPTOV1): Likewise. (ARM_ARCH_V8_1A_FP): Use ARM_AEXT2_V8_1A to set second bitfield of feature bits. (ARM_ARCH_V8_1A_SIMD): Likewise. (ARM_ARCH_V8_1A_CRYPTOV1): Likewise. opcodes/ * arm-dis.c (arm_opcodes): Guard lda, ldab, ldaex, ldaexb, ldaexh, stl, stlb, stlh, stlex, stlexb and stlexh by ARM_EXT2_ATOMICS instead of ARM_EXT_V8. (thumb32_opcodes): Add entries for wide ARMv8-M instructions.
2015-12-24Consolidate Thumb-1/Thumb-2 ISA detectionThomas Preud'homme1-30/+46
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (move_or_literal_pool): Check mov.w, mvm and movw availability against arm_ext_v6t2 instead of checking arm_arch_t2, fixing comments along the way. (handle_it_state): Check arm_ext_v6t2 instead of arm_arch_t2 to generate IT instruction. (t1_isa_t32_only_insn): New function. (md_assemble): Use above new function to check for invalid wide instruction for CPU Thumb ISA and to determine what Thumb extension bit is necessary for that instruction. (md_apply_fix): Use arm_ext_v6t2 instead of arm_arch_t2 to decide if branch is out of range. include/opcode/ * arm.h (ARM_ARCH_THUMB2): Add comment explaining its meaning and remove extension bit not including any Thumb-2 instruction.
2015-12-18Process 64-bit imm/disp only for 64-bit BFDH.J. Lu1-0/+6
We only need to store 32-bit immediate in 64-bit and optimize 64-bit displacement to 32-bit only for 64-bit BFD. * config/tc-i386.c (optimize_imm): Store 32-bit immediate in 64-bit only for 64-bit BFD (optimize_disp): Optimize 64-bit displacement to 32-bit only for 64-bit BFD.
2015-12-17[Patch ARM] Fix build attributes for armv8-a in case of assembler files that ↵Ramana Radhakrishnan1-1/+2
contain no directives. There is currently a problem in the way in which we produce build attributes for simple assembler files that have armv8-a instructions. In these case we need to generate TAG_ISA_THUMB_Use to be Thumb-2 and set the architecture profile to be 'A' rather than not setting architecture profile to be 'A' and setting TAG_ISA_THUMB_Use to be Thumb-1. This is a pre-requisite for any v8-m patches that have been posted. arm-none-eabi gas testsuite run. no regressions. 2015-12-17 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com> * gas/config/tc-arm.c (aeabi_set_public_attributes): Adjust TAG_ARCH_profile for armv8-a. * gas/testsuite/gas/arm/armv8a-automatic-hlt.d: New test. * gas/testsuite/gas/arm/armv8a-automatic-hlt.s: New test. * gas/testsuite/gas/arm/armv8a-automatic-lda.d: New test. * gas/testsuite/gas/arm/armv8a-automatic-lda.s: New test.
2015-12-16[ARM] Add support for thumb1 pcrop relocations.Mickael Guene1-5/+104
To support thumb1 execute-only code we need to support four new relocations (R_ARM_THM_ALU_ABS_G0_NC, R_ARM_THM_ALU_ABS_G1_NC, R_ARM_THM_ALU_ABS_G2_NC and R_ARM_THM_ALU_ABS_G3_NC). These relocations allow the static linker to finalize construction of symbol address. Typical sequence of code to get address of the symbol foo is then the following : movs r3, #:upper8_15:#foo lsls r3, #8 adds r3, #:upper0_7:#foo lsls r3, #8 adds r3, #:lower8_15:#foo lsls r3, #8 adds r3, #:lower0_7:#foo This will give following sequence of text and relocations after assembly : 4: 2300 movs r3, #0 4: R_ARM_THM_ALU_ABS_G3_NC foo 6: 021b lsls r3, r3, #8 8: 3300 adds r3, #0 8: R_ARM_THM_ALU_ABS_G2_NC foo a: 021b lsls r3, r3, #8 c: 3300 adds r3, #0 c: R_ARM_THM_ALU_ABS_G1_NC foo e: 021b lsls r3, r3, #8 10: 3300 adds r3, #0 10: R_ARM_THM_ALU_ABS_G0_NC foo
2015-12-15Remove refernces to a non-existent silicon errata.Nick Clifton1-10/+3
* doc/c-msp430.texi (MSP430 Options): Remove references to a non-existent silicon errata. * config/tc-msp430.c: Likewise.
2015-12-15Add support for RX V2 Instruction SetYoshinori Sato3-36/+225
binutils * readelf.c(get_machine_flags): Add v2 flag. gas * config/rx-defs.h(rx_cpu_type): Add RXV2 type. * config/tc-rx.c(cpu_type_list): New type lookup table. (md_parse_option): Use lookup table for choose cpu. (md_show_usage): Add rxv2 for mcpu option. * doc/c-rx.texi: Likewise. * config/rx-parse.y: Add v2 instructions and ACC register. (rx_check_v2): check v2 type. include/elf * rx.h(E_FLAG_RX_V2): New RXv2 type. include/opcode * rx.h: Add new instructions. opcoes * rx-deocde.opc(rx_decode_opcode): Add new instructions pattern. * rx-dis.c(register_name): Add new register. gas/testsuite * gas/rx/emaca.d: New. * gas/rx/emaca.sm: New. * gas/rx/emsba.d: New. * gas/rx/emsba.sm: New. * gas/rx/emula.d: New. * gas/rx/emula.sm: New. * gas/rx/fadd.d: Add new pattern. * gas/rx/fadd.sm: Add new pattern. * gas/rx/fmul.d: Add new pattern. * gas/rx/fmul.sm: Add new pattern. * gas/rx/fsqrt.d: New. * gas/rx/fsqrt.sm: New. * gas/rx/fsub.d: Add new pattern. * gas/rx/fsub.sm: Add new pattern. * gas/rx/ftou.d: New. * gas/rx/ftou.sm: New. * gas/rx/maclh.d: New. * gas/rx/maclh.sm: New. * gas/rx/maclo.d: Add new pattern. * gas/rx/maclo.sm: Add new pattern. * gas/rx/macros.inc: Add new register. * gas/rx/movco.d: New. * gas/rx/movco.sm: New. * gas/rx/movli.d: New. * gas/rx/movli.sm: New. * gas/rx/msbhi.d: New. * gas/rx/msbhi.sm: New. * gas/rx/msblh.d: New. * gas/rx/msblh.sm: New. * gas/rx/msblo.d: New. * gas/rx/msblo.sm: New. * gas/rx/mullh.d: New. * gas/rx/mullh.sm: New. * gas/rx/mvfacgu.d: New. * gas/rx/mvfacgu.sm: New. * gas/rx/mvfachi.d: Add new pattern. * gas/rx/mvfachi.sm: Add new pattern. * gas/rx/mvfaclo.d: Add new pattern. * gas/rx/mvfaclo.sm: Add new pattern. * gas/rx/mvfacmi.d: Add new pattern. * gas/rx/mvfacmi.sm: Add new pattern. * gas/rx/mvfc.d: Add new pattern. * gas/rx/mvtacgu.d: New. * gas/rx/mvtacgu.sm: New. * gas/rx/mvtc.d: Add new pattern. * gas/rx/popc.d: Add new pattern. * gas/rx/pushc.d: Add new pattern. * gas/rx/racl.d: New. * gas/rx/racl.sm: New. * gas/rx/racw.d: Add new pattern. * gas/rx/racw.sm: Add new pattern. * gas/rx/rdacl.d: New. * gas/rx/rdacl.sm: New. * gas/rx/rdacw.d: New. * gas/rx/rdacw.sm: New. * gas/rx/rx.exp: Add option. * gas/rx/stnz.d: Add new pattern. * gas/rx/stnz.sm: Add new pattern. * gas/rx/stz.d: Add new pattern. * gas/rx/stz.sm: Add new pattern. * gas/rx/utof.d: New. * gas/rx/utof.sm: New.
2015-12-14[AArch64][PATCH 11/14] Add support for the 2H vector type.Matthew Wahab1-7/+6
ARMv8.2 adds 16-bit floating point operations as an optional extension to the floating point and Adv.SIMD support. The FP16 additions to the scalar pairwise group introduce a new vector type, 2H. This patch adds support for this vector type to binutils. The patch adds a new operand qualifier to the enum aarch64.h:aarch64_opnd_qualifier. This interferes with the calculation used by aarch64-dis.c:get_vreg_qualifier_from_value, called when decoding an instruction. Since the new vector type is only used in FP16 scalar pairwise instructions which do not require the function, this patch adjusts the function to ignore the new qualifier. gas/ 2015-12-14 Matthew Wahab <matthew.wahab@arm.com> * config/tc-aarch64.c (parse_neon_type_for_operand): Adjust to take into account new vector type 2H. (vectype_to_qualifier): Likewise. include/opcode/ 2015-12-14 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (enum aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_V_2H. opcodes/ 2015-12-14 Matthew Wahab <matthew.wahab@arm.coM> * aarch64-dis.c (get_vreg_qualifier_from_value): Update comment and adjust calculation to ignore qualifier for type 2H. * aarch64-opc.c (aarch64_opnd_qualifier): Add "2H". Change-Id: Idf9a3694732962c80fde04f08c7304de9164f126
2015-12-14[AArch64][PATCH 10/14] Rework code mapping vector types to operand qualifiers.Matthew Wahab1-6/+30
ARMv8.2 adds 16-bit floating point operations as an optional extension to the floating point and Adv.SIMD support. The FP16 additions to the scalar pairwise group introduce a new vector type. This patch reworks code in the assembler to allow the addition of the new type. The new vector type requires the addtion of a new operand qualifier to the enum aarch64_opnd_qualifier which is defined include/opcodes/aarch64.h, in the group prefixed by AARCH64_OPN_QLF_V_. The correctness of the GAS utility function tc-aarch64.c:vectype_to_qualifier is heavily dependent on the number and ordering of this group. In particular, it makes assumptions about the positions of the members of the group that are not true if a qualifier for type 2H is added before the qualifier for 4H. This patch reworks the function to weaken its assumptions, making it calculate positions in the group from the type (B, H, S, D, Q) and register width. gas/ 2015-12-14 Matthew Wahab <matthew.wahab@arm.com> * config/tc-aarch64.c (vectype_to_qualifier): Calculate operand qualifier from per-type base and offet. Change-Id: I95535864e342a6dec46f69d2696b3900a008f0b1
2015-12-11[AArch64][Patch 5/5] Add instruction PSB CSYNCMatthew Wahab1-1/+55
The Statistical Profile Extension adds the instruction PSB CSYNC as an alias for the HINT #17 instruction. This patch adds the instruction to binutils as a HINT alias that takes an operand. A new operand type, AARCH64_OPND_BARRIER_PSB, is added to represent the operand to PSB. A parser for the operand type is added to the assembler and a printer to the disassembler. The operand name "csync" is added to the list of HINT options with HINT number #17. Encoding and decoding of the operand is handled by the ins_hint/ext_hint functions added in the preceding patches. gas/ 2015-12-11 Matthew Wahab <matthew.wahab@arm.com> * config/tc-aarch64.c (aarch64_hint_opt_hsh): New. (parse_barrier_psb): New. (parse_operands): Add case for AARCH64_OPND_BARRIER_PSB. (md_begin): Set up aarch64_hint_opt_hsh. gas/testsuite/ 2015-12-11 Matthew Wahab <matthew.wahab@arm.com> * gas/aarch64/system-2.d: Enable the statistical profiling extension. Update the expected output. * gas/aarch64/system-2.s: Add tests for PSB CSYNC. * gas/aarch64/system.d: Update the expected output. include/opcode/ 2015-12-11 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (aarch64_opnd): Add AARCH64_OPND_BARRIER_PSB. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. * aarch64-opc.c (aarch64_hint_options): Add "csync". (aarch64_print_operands): Handle AARCH64_OPND_BARRIER_PSB. * aarch64-tbl.h (aarch64_feature_stat_profile): New. (STAT_PROFILE): New. (aarch64_opcode_table): Add "psb". (AARCH64_OPERANDS): Add "BARRIER_PSB". Change-Id: I5ffb672d26a8b15b48785478d359350a9b70ca09
2015-12-11[AArch64][Patch 1/5] Support the ARMv8.2 Statistical Profiling Extension.Matthew Wahab1-0/+1
The Statistical Profile extension included in the ARMv8.2 architecture adds a number of system registers and a new instruction. This patch set adds support for the extension to binutils, enabled when -march=armv8.2-a+profile is given. The patches in this series: - Add the new command line option and feature flags. - Add the new system registers. - Adjust the maximum number of aliases permitted for an instruction. - Add support for HINT aliases which take operands. - Add the new instruction, an alias of the HINT instruction. This patch adds the option "profile" to the permitted architecture extensions, disabling it by default. gas/ 2015-12-11 Matthew Wahab <matthew.wahab@arm.com> * config/tc-aarch64.c (aarch64_features): Add "profile". * doc/c-aarch64.texi (AArch64 Extensions): Add "profile". include/opcode/ 2015-12-11 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (AARCH64_FEATURE_PROFILE): New. Change-Id: If9bb4a9b69a264180f96f8ffaf10b15ced273699
2015-12-10[AArch64][PATCH 2/2] Support ARMv8.2 DC CVAP instruction.Matthew Wahab1-0/+4
ARMv8.2 adds the new system instruction DC CVAP. This patch adds support for the instruction to binutils, enabled when -march=armv8.2-a is selected. gas/ 2015-12-10 Matthew Wahab <matthew.wahab@arm.com> * config/tc-aarch64.c (parse_sys_ins_reg): Add check of architectural support for system register. gas/testsuite/ 2015-12-10 Matthew Wahab <matthew.wahab@arm.com> * gas/aarch64/sysreg-2.d: Add tests for dc instruction. * gas/aarch64/sysreg-2.s: Add uses of dc instruction. include/opcode/ 2015-12-10 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (aarch64_sys_ins_reg_supported_p): Declare. opcodes/ 2015-12-10 Matthew Wahab <matthew.wahab@arm.com> * aarch64-opc.c (aarch64_sys_regs_dc): Add "cvap". (aarch64_sys_ins_reg_supported_p): New. Change-Id: I3158b97d9bbee9644c2d0e2986db807412ef1053
2015-12-10arc/gas: Accept, but ignore, dummy arguments.Andrew Burgess1-1/+2
There's a set of legacy command line arguments that the arc assembler still accepts, however, these arguments not longer have any effect on the assembler. Currently we return false from md_parse_option for all of these arguments, with the result that the assembler terminates with an error message. We should return true indicating that the argument has been accepted, even though we ignore it. gas/ChangeLog: * config/tc-arc.c (md_parse_option): Return 1 in order to accept dummy arguments.
2015-12-09Implement Intel OSPKE instructionsH.J. Lu1-0/+2
This patch implements Intel OSPKE instructions documented in Intel64 and IA-32 Architectures Software Developer’s Manual Volume 2, September 2015. gas/testsuite/ * gas/i386/i386.exp: Run ospke and x86-64-ospke. * gas/i386/ospke.d: New file. * gas/i386/ospke.s: Likewise. * gas/i386/x86-64-ospke.d: Likewise. opcodes/ * i386-dis.c (MOD_0F01_REG_5): New. (RM_0F01_REG_5): Likewise. (reg_table): Use MOD_0F01_REG_5. (mod_table): Add MOD_0F01_REG_5. (rm_table): Add RM_0F01_REG_5. * i386-gen.c (cpu_flag_init): Add CPU_OSPKE_FLAGS. (cpu_flags): Add CpuOSPKE. * i386-opc.h (CpuOSPKE): New. (i386_cpu_flags): Add cpuospke. * i386-opc.tbl: Add rdpkru and wrpkru instructions. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2015-12-09sparc: support %dN and %qN syntax for FP registers.Jose E. Marchesi1-5/+11
The SPARC Refence Manual documents the %dN and %qN syntax to refer to double and quad-precision floating-point registers, respectively. See OSA2015 Appendix C, Assembly Language Syntax, C1.1 Register Names. This patch adds support for these names to GAS. This eases the porting of software from Solaris to GNU/Linux, as these register names have been supported by the Solaris linker for a long time and many assembler require that support. gas/ChangeLog: 2015-12-09 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (sparc_ip): Support %dN and %qN notation for double and quad-precision floating-point registers.
2015-12-09Fix compile time warning building RX target.Nick Clifton1-1/+1
2015-12-08ELF: don't re-order SHF_FILE symbolsJan Beulich1-3/+6
.file directives may be used to identify the scope of local symbols, the purpose of which gets subverted when re-ordering them. Only allow the first of them to be moved to the first position.
generated by cgit v1.1 at 2024-08-12 08:48:09 +0000