aboutsummaryrefslogtreecommitdiff
path: root/binutils
AgeCommit message (Collapse)AuthorFilesLines
2018-08-30Treat SHT_FINI_ARRAY and SHT_PREINIT_ARRAY as relocatable sectionsH.J. Lu2-0/+7
Since SHT_FINI_ARRAY and SHT_PREINIT_ARRAY sections are relocatable, this patch fixes readelf and adds a testcase. binutils/ * readelf.c (process_section_headers): Treat SHT_FINI_ARRAY and SHT_PREINIT_ARRAY as relocatable sections. gas/ * testsuite/gas/elf/elf.exp: Run section14. * testsuite/gas/elf/section14.d: New file. * testsuite/gas/elf/section14.s: Likewise.
2018-08-30[MIPS] Add myself as a MIPS port maintainer.Chenghua Xu2-0/+5
binutils/ * MAINTAINERS: Add myself as a MIPS port maintainer.
2018-08-29[MIPS] Add Loongson 2K1000 proccessor support.Chenghua Xu3-0/+11
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs264e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS264E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs264e to bfd_mach_mips_gs464e extension. binutils/ * NEWS: Mention Loongson 2K1000 proccessor support. * readelf.c (get_machine_flags): Handle gs264e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS264E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS264E. (mips_cpu_info_table): Add gs264e descriptors. * doc/as.texi (march table): Add gs264e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS264E. * opcode/mips.h (CPU_XXX): New CPU_GS264E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs264e and gs464e. opcodes/ * mips-dis.c (mips_arch_choices): Add gs264e descriptors.
2018-08-29[MIPS] Add Loongson 3A2000/3A3000 proccessor support.Chenghua Xu3-0/+11
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs464e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS464E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs464e to bfd_mach_mips_gs464 extension. binutils/ * NEWS: Mention Loongson 3A2000/3A3000 proccessor support. * readelf.c (get_machine_flags): Handle gs464e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS464E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS464E. (mips_cpu_info_table): Add gs464e descriptors. * doc/as.texi (march table): Add gs464e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS464E. * opcode/mips.h (CPU_XXX): New CPU_GS464E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs464e and gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464e descriptors.
2018-08-29[MIPS] Add Loongson 3A1000 proccessor support.Chenghua Xu3-4/+13
bfd/ * archures.c (bfd_architecture): Rename bfd_mach_mips_loongson_3a to bfd_mach_mips_gs464. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Likewise. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Likewise. (bfd_mips_isa_ext_mach): Likewise. (bfd_mips_isa_ext): Likewise. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. binutils/ * NEWS: Mention Loongson 3A1000 proccessor support. * readelf.c (get_machine_flags): Rename loongson-3a to gs464. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. elfcpp/ * mips.c (EF_MIPS_MACH): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Rename CPU_LOONGSON_3A to CPU_GS464. (mips_cpu_info_table): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * doc/as.texi (march table): Rename loongson3a to gs464. * testsuite/gas/mips/loongson-3a-mmi.d: Set "ISA Extension" flag to None. gold/ * mips.cc (Mips_mach, add_machine_extensions, elf_mips_mach): Rename loongson3a to gs464. (mips_isa_ext_mach, mips_isa_ext): Delete loongson3a. (infer_abiflags): Use ases instead of isa_ext for infer ABI flags. (elf_mips_mach_name): Rename loongson3a to gs464. include/ * elf/mips.h (E_MIPS_MACH_XXX): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. (AFL_EXT_XXX): Delete AFL_EXT_LOONGSON_3A. * opcode/mips.h (INSN_XXX): Delete INSN_LOONGSON_3A. (CPU_XXX): Rename CPU_LOONGSON_3A to CPU_GS464. * opcode/mips.h (mips_isa_table): Delete CPU_LOONGSON_3A case. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Rename loongson3a to gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * mips-opc.c (mips_opcodes): Change Comments.
2018-08-29[MIPS/GAS] Add Loongson EXT2 Instructions support.Chenghua Xu2-0/+6
bfd/ * elfxx-mips.c (print_mips_ases): Add Loongson EXT2 extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT2 extension. gas/ * NEWS: Mention Loongson EXTensions R2 (EXT2) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT2 and OPTION_NO_LOONGSON_EXT2. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT2 to AFL_ASE_LOONGSON_EXT2. (md_show_usage): Add help for -mloongson-ext2 and -mno-loongson-ext2. * doc/as.texi: Document -mloongson-ext2, -mno-loongson-ext2. * doc/c-mips.texi: Document -mloongson-ext2, -mno-loongson-ext2, .set loongson-ext2 and .set noloongson-ext2. * testsuite/gas/mips/loongson-ext2.d: New test. * testsuite/gas/mips/loongson-ext2.s: New test. * testsuite/gas/mips/mips.exp: Run loongson-ext2 test. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT2): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT2. * opcode/mips.h (ASE_LOONGSON_EXT2): New macro. opcodes/ * mips-dis.c (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (LEXT2): New macro. (mips_opcodes): Add cto, ctz, dcto, dctz instructions.
2018-08-29[MIPS/GAS] Split Loongson EXT Instructions from loongson3a.Chenghua Xu2-0/+6
bfd/ * elfxx-mips.c (infer_mips_abiflags): Use ases instead of isa_ext for infer ABI flags. (print_mips_ases): Add Loongson EXT extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT extension. elfcpp/ * mips.h (AFL_ASE_LOONGSON_EXT): New enum. gas/ * NEWS: Mention Loongson EXTensions (EXT) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT and OPTION_NO_LOONGSON_EXT. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT to AFL_ASE_LOONGSON_EXT. (mips_cpu_info_table): Add ASE_LOONGSON_EXT for loongson3a. (md_show_usage): Add help for -mloongson-ext and -mno-loongson-ext. * doc/as.texi: Document -mloongson-ext, -mno-loongson-ext. * doc/c-mips.texi: Document -mloongson-ext, -mno-loongson-ext, .set loongson-ext and .set noloongson-ext. * testsuite/gas/mips/loongson-mmi.d: Add ASE flag. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT. * opcode/mips.h (ASE_LOONGSON_EXT): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add EXT to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (IL3A): Delete. * mips-opc.c (LEXT): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LEXT for EXT instructions.
2018-08-29[MIPS/GAS] Split Loongson CAM Instructions from loongson3aChenghua Xu2-0/+6
bfd/ * elfxx-mips.c (print_mips_ases): Add CAM extension. binutils/ * readelf.c (print_mips_ases): Add CAM extension. gas/ * NEWS: Mention Loongson Content Address Memory (CAM) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_CAM and OPTION_NO_LOONGSON_CAM. (md_longopts): Likewise. (mips_ases): Define availability for CAM. (mips_convert_ase_flags): Map ASE_LOONGSON_CAM to AFL_ASE_LOONGSON_CAM. (mips_cpu_info_table): Add ASE_LOONGSON_CAM for loongson3a. (md_show_usage): Add help for -mloongson-cam and -mno-loongson-cam. * doc/as.texi: Document -mloongson-cam, -mno-loongson-cam. * doc/c-mips.texi: Document -mloongson-cam, -mno-loongson-cam, .set loongson-cam and .set noloongson-cam. * testsuite/gas/mips/loongson-3a-2.d: Move cam test to ... * testsuite/gas/mips/loongson-cam.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a-2.s: Move cam test to ... * testsuite/gas/mips/loongson-cam.s: Here. * testsuite/gas/mips/loongson-3a-mmi.d: Add ASE flag. * testsuite/gas/mips/mips.exp: Run loongson-cam test. include/ * elf/mips.h (AFL_ASE_LOONGSON_CAM): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_CAM. * opcode/mips.h (ASE_LOONGSON_CAM): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add CAM to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-cam option. (print_mips_disassembler_options): Document -M loongson-cam. * mips-opc.c (LCAM): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LCAM for CAM instructions.
2018-08-27x86: Don't mask out the GNU_PROPERTY_X86_UINT32_VALID bitH.J. Lu4-10/+41
Since only the GNU_PROPERTY_X86_UINT32_VALID bit may be set in data-only relocatable objects which don't contain any instructions, linker shouldn't mask out the GNU_PROPERTY_X86_UINT32_VALID bit when merging GNU_PROPERTY_X86_XXX bits. Otherwise, linker output doesn't contain GNU_PROPERTY_X86_XXX property with any data-only relocatable inputs. This patch keeps the GNU_PROPERTY_X86_UINT32_VALID bit and updates readelf to print "<None>" if GNU_PROPERTY_X86_XXX property only has the GNU_PROPERTY_X86_UINT32_VALID bit. bfd/ * elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Don't mask out the GNU_PROPERTY_X86_UINT32_VALID bit. binutils/ * readelf.c (decode_x86_isa): Print <None> if bitmask only contains the GNU_PROPERTY_X86_UINT32_VALID bit. (decode_x86_feature_1): Likewise. (decode_x86_feature_2): Likewise. (print_gnu_property_note): Don't mask out the GNU_PROPERTY_X86_UINT32_VALID bit. * testsuite/binutils-all/i386/pr21231b.d: Updated. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. gas/ * testsuite/gas/i386/i386.exp: Run property-1 and x86-64-property-1. * testsuite/gas/i386/property-1.d: New file. * testsuite/gas/i386/property-1.s: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. ld/ * testsuite/ld-i386/i386.exp: Run property-x86-5. * testsuite/ld-i386/property-x86-5.d: New file. * testsuite/ld-x86-64/property-x86-5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-5.d: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Likewise. * testsuite/ld-x86-64/property-x86-5b.s: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run property-x86-5 and property-x86-5-x32.
2018-08-27readelf.c: Break multi-statement lineH.J. Lu2-3/+15
* readelf.c (decode_x86_compat_isa): Break multi-statement line. (decode_x86_isa): Likewise. (decode_x86_feature_2): Likewise.
2018-08-25elf: Check for corrupt symbol version infoH.J. Lu2-0/+15
The BFD linker with PR ld/23499 may generate shared libraries with corrupt symbol version info which leads to linker error when the corrupt shared library is used: /usr/bin/ld: bin/libKF5Service.so.5.49.0: _edata: invalid version 21 (max 0) /usr/bin/ld: bin/libKF5Service.so.5.49.0: error adding symbols: bad value Add check for corrupt symbol version info to objdump: 00000000000af005 g D .data 0000000000000000 <corrupt> _edata and readelf: 728: 00000000000af005 0 NOTYPE GLOBAL DEFAULT 25 _edata@<corrupt> (5) bfd/ PR ld/23499 * elf.c (_bfd_elf_get_symbol_version_string): Return _("<corrupt>") for corrupt symbol version info. binutils/ PR ld/23499 * readelf.c (get_symbol_version_string): Return _("<corrupt>") for corrupt symbol version info.
2018-08-24x86: Update GNU_PROPERTY_X86_XXX macrosH.J. Lu17-67/+296
This patch updates GNU_PROPERTY_X86_XXX macros: 1. GNU_PROPERTY_X86_UINT32_AND_XXX: A 4-byte unsigned integer property. A bit is set if it is set in all relocatable inputs: #define GNU_PROPERTY_X86_UINT32_AND_LO 0xc0000002 #define GNU_PROPERTY_X86_UINT32_AND_HI 0xc0007fff 2. GNU_PROPERTY_X86_UINT32_OR_XXX: A 4-byte unsigned integer property. A bit is set if it is set in any relocatable inputs: #define GNU_PROPERTY_X86_UINT32_OR_LO 0xc0008000 #define GNU_PROPERTY_X86_UINT32_OR_HI 0xc000ffff 3. GNU_PROPERTY_X86_UINT32_OR_AND_XXX: A 4-byte unsigned integer property. A bit is set if it is set in any relocatable inputs and the property is present in all relocatable inputs: #define GNU_PROPERTY_X86_UINT32_OR_AND_LO 0xc0010000 #define GNU_PROPERTY_X86_UINT32_OR_AND_HI 0xc0017fff 4. GNU_PROPERTY_X86_FEATURE_2_NEEDED, GNU_PROPERTY_X86_FEATURE_2_USED and GNU_PROPERTY_X86_FEATURE_2_XXX bits. GNU_PROPERTY_X86_FEATURE_1_AND is unchanged. GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED are updated to better support targeted processors since GNU_PROPERTY_X86_ISA_1_?86 aren't isn't very useful. A new set of GNU_PROPERTY_X86_ISA_1_XXX bits are defined. The previous GNU_PROPERTY_X86_ISA_1_XXX macros are deprecated and renamed to GNU_PROPERTY_X86_COMPAT_ISA_1_XXX. bfd/ * elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Handle X86_COMPAT_ISA_1_USED, X86_COMPAT_ISA_1_NEEDED, X86_UINT32_AND_LO, X86_UINT32_AND_HI, X86_UINT32_OR_LO, X86_UINT32_OR_HI, X86_UINT32_OR_AND_LO and X86_UINT32_OR_AND_HI instead of X86_ISA_1_USED, X86_ISA_1_NEEDED and X86_FEATURE_1_AND. (_bfd_x86_elf_merge_gnu_properties): Likewise. (_bfd_x86_elf_link_setup_gnu_properties): Add X86_FEATURE_2_NEEDED instead of X86_ISA_1_NEEDED. (_bfd_x86_elf_link_fixup_gnu_properties): Handle X86_COMPAT_ISA_1_USED, X86_COMPAT_ISA_1_NEEDED, X86_UINT32_AND_LO, X86_UINT32_AND_HI, X86_UINT32_OR_LO, X86_UINT32_OR_HI, X86_UINT32_OR_AND_LO and X86_UINT32_OR_AND_HI instead of X86_ISA_1_USED, X86_ISA_1_NEEDED and X86_FEATURE_1_AND. binutils/ * readelf.c (decode_x86_compat_isa): New function. (decode_x86_feature_2): Likewise. (decode_x86_isa): Updated for new X86_ISA_1_XXX bits. (decode_x86_feature): Renamed to ... (decode_x86_feature_1): This. Remove the type argument. (print_gnu_property_note): Handle X86_COMPAT_ISA_1_USED, X86_COMPAT_ISA_1_NEEDED, X86_UINT32_AND_LO, X86_UINT32_AND_HI, X86_UINT32_OR_LO, X86_UINT32_OR_HI, X86_UINT32_OR_AND_LO and X86_UINT32_OR_AND_HI instead of X86_ISA_1_USED, X86_ISA_1_NEEDED and X86_FEATURE_1_AND. * testsuite/binutils-all/i386/pr21231b.s: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494c.s: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Updated. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. include/ * elf/common.h (GNU_PROPERTY_X86_ISA_1_USED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_ISA_1_USED): This. (GNU_PROPERTY_X86_ISA_1_NEEDED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_ISA_1_NEEDED): This. (GNU_PROPERTY_X86_ISA_1_XXX): Renamed to ... (GNU_PROPERTY_X86_COMPAT_ISA_1_XXX): This. (GNU_PROPERTY_X86_UINT32_AND_LO): New. (GNU_PROPERTY_X86_UINT32_AND_HI): Likewise. (GNU_PROPERTY_X86_UINT32_OR_LO): Likewise. (GNU_PROPERTY_X86_UINT32_OR_HI): Likewise. (GNU_PROPERTY_X86_UINT32_OR_AND_LO): Likewise. (GNU_PROPERTY_X86_UINT32_OR_AND_HI): Likewise. (GNU_PROPERTY_X86_ISA_1_CMOV): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE2): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE3): Likewise. (GNU_PROPERTY_X86_ISA_1_SSSE3): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE4_1): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE4_2): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX2): Likewise. (GNU_PROPERTY_X86_ISA_1_FMA): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512F): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512CD): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512ER): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512PF): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512VL): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512DQ): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512BW): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_4FMAPS): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_4VNNIW): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_BITALG): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_IFMA): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_VBMI): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_VBMI2): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_VNNI): Likewise. (GNU_PROPERTY_X86_FEATURE_2_X86): Likewise. (GNU_PROPERTY_X86_FEATURE_2_X87): Likewise. (GNU_PROPERTY_X86_FEATURE_2_MMX): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XMM): Likewise. (GNU_PROPERTY_X86_FEATURE_2_YMM): Likewise. (GNU_PROPERTY_X86_FEATURE_2_ZMM): Likewise. (GNU_PROPERTY_X86_FEATURE_2_FXSR): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XSAVE): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XSAVEOPT): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XSAVEC): Likewise. (GNU_PROPERTY_X86_FEATURE_1_AND): Updated to (GNU_PROPERTY_X86_UINT32_AND_LO + 0). (GNU_PROPERTY_X86_ISA_1_NEEDED): Defined to (GNU_PROPERTY_X86_UINT32_OR_LO + 0). (GNU_PROPERTY_X86_FEATURE_2_NEEDED): New. Defined to (GNU_PROPERTY_X86_UINT32_OR_LO + 1). (GNU_PROPERTY_X86_ISA_1_USED): Defined to (GNU_PROPERTY_X86_UINT32_OR_AND_LO + 0). (GNU_PROPERTY_X86_FEATURE_2_USED): New. Defined to (GNU_PROPERTY_X86_UINT32_OR_AND_LO + 1). ld/ * testsuite/ld-i386/i386.exp: Run pr23372c, pr23372d, pr23486c and pr23486d. * testsuite/ld-i386/pr23372a.s: Update comments. * testsuite/ld-i386/pr23372b.s: Likewise. * testsuite/ld-i386/pr23372c.s: Likewise. * testsuite/ld-x86-64/pr23372a.s: Likewise. * testsuite/ld-x86-64/pr23372b.s: Likewise. * testsuite/ld-x86-64/pr23372c.s: Likewise. * testsuite/ld-x86-64/pr23486a.s: Likewise. * testsuite/ld-x86-64/pr23486b.s: Likewise. * testsuite/ld-i386/pr23372c.d: New file. * testsuite/ld-i386/pr23372d.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/pr23372d.s: Likewise. * testsuite/ld-x86-64/pr23372e.s: Likewise. * testsuite/ld-x86-64/pr23372f.s: Likewise. * testsuite/ld-x86-64/pr23486c-x32.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486c.s: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr23486d.s: Likewise. * testsuite/ld-i386/property-3.r: Updated. * testsuite/ld-i386/property-4.r: Likewise. * testsuite/ld-i386/property-5.r: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-1.S: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/ld-i386/property-x86-2.S: Likewise. * testsuite/ld-i386/property-x86-3.s: Likewise. * testsuite/ld-x86-64/property-x86-1.S: Likewise. * testsuite/ld-x86-64/property-x86-2.S: Likewise. * testsuite/ld-x86-64/property-x86-3.s: Likewise. * ld/testsuite/ld-x86-64/x86-64.exp: Run pr23372c, pr23372c-x32, pr23372d, pr23372d-x32, pr23486c, pr23486c-x32, pr23486d and pr23486d-x32.
2018-08-24x86: Add GNU_PROPERTY_X86_UINT32_VALIDH.J. Lu2-9/+40
The older linker treats .note.gnu.property section as a generic note and just concatenates all .note.gnu.property sections from the input to the output. On CET-enabled OS, the output of the older linker is marked as CET enabled, but in fact, it is not CET enabled and it crashes on CET-enabled machines. This patch defines GNU_PROPERTY_X86_UINT32_VALID. Linker is updated to set the GNU_PROPERTY_X86_UINT32_VALID bit in GNU property note for non-relocatable output to differentiate outputs from the older linker. bfd/ * elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Mask out the GNU_PROPERTY_X86_UINT32_VALID bit. (_bfd_x86_elf_link_fixup_gnu_properties): Set the GNU_PROPERTY_X86_UINT32_VALID bit for non-relocatable output. binutils/ * readelf.c (print_gnu_property_note): Check the GNU_PROPERTY_X86_UINT32_VALID bit for invalid GNU property note. include/ * elf/common.h (GNU_PROPERTY_X86_UINT32_VALID): New.
2018-08-24PowerPC64 st_other decoding in readelfAlan Modra2-3/+14
localentry:1 is a valid encoding, so display it. The patch also bails out of get_ppc64_symbol_other when st_other bits besides the three used for localentry offsets are set, to avoid hiding any such values. * readelf.c (get_ppc64_symbol_other): Return NULL if st_other field contains unrecognised or reserved values. Handle localentry:1 value.
2018-08-23Prune BFD warnings for unknown GNU propertiesH.J. Lu5-2/+87
When glibc is enabled with the new GNU_PROPERTY_X86_XXX bits: https://groups.google.com/forum/#!topic/x86-64-abi/-D05GQ3kWrA BFD will issue an unknown GNU property warning like warning: tmpdir/ld1: unsupported GNU_PROPERTY_TYPE (5) type: 0xc0010001 and ignore such GNU properties. This patch adds prune_warnings_extra to prune such warnings on release branches and updates prune_warnings to call prune_warnings_extra. binutils/ PR ld/23536 * Makefile.am (development.exp): New target. (EXTRA_DEJAGNU_SITE_CONFIG): New. (DISTCLEANFILES): Add development.exp. * Makefile.in: Regenerated. * testsuite/binutils-all/objcopy.exp (strip_test): Call prune_warnings to prune BFD output. (strip_test_with_saving_a_symbol): Likewise. (objcopy_test_without_global_symbol): Likewise. * testsuite/lib/binutils-common.exp (prune_warnings_extra): New proc. (prune_warnings): Likewise. gas/ PR ld/23536 * Makefile.am (development.exp): New target. (EXTRA_DEJAGNU_SITE_CONFIG): New. (DISTCLEANFILES): Add development.exp. * Makefile.in: Regenerated. ld/ PR ld/23536 * Makefile.am (development.exp): New target. (EXTRA_DEJAGNU_SITE_CONFIG): New. (DISTCLEANFILES): Add development.exp. * Makefile.in: Regenerated. * testsuite/ld-bootstrap/bootstrap.exp: Call prune_warnings to prune BFD output. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/lib/ld-lib.exp (prune_warnings): Removed. * testsuite/ld-elf/shared.exp: Allow "\n" in linker warnings.
2018-08-23Document setting experimental on release branch.H.J. Lu2-2/+8
* README-how-to-make-a-release: Document setting "experimental" to false.
2018-08-22Correct readelf e_shstrndx range checkAlan Modra2-26/+47
Fixes a bogus out of range error: Number of section headers: 0 (210016) Section header string table index: 1 <corrupt: out of range> Caused due to e_shnum remaining as zero rather than being updated to the value from section_header[0].sh_info at the point where we range check e_shstrndx. * readelf.c (process_file_header): Assign updated values from section_header[0] fields to e_phnum, e_shnum and e_shstrndx during printing of header. Correct e_shstrndx range check. Remove unnecessary casts and use %u rather than %ld for unsigned int header fields. Don't print a random %lx when reporting an unknown EI_VERSION.
2018-08-21Note that Arnold Metselaar has retired as the z80 maintainer.Nick Clifton2-1/+6
2018-08-21Fix a seg-fault in readelf when parsing corrupt HPPA unwind tables.L. Simon2-2/+8
PR 23531 * readelf.c (hppa_process_unwind): Only dump the unwind table if the data was successfully read in.
2018-08-18binutils testsuite strip-13 testAlan Modra7-48/+77
The strip-13 test runs into difficulty using dc.a on some targets. dc.a writes a power of 2 number of bytes large enough to contain a target address. On some targets, eg. avr-elf, this can be 2 bytes but the ELF format used require words of 4 bytes to make up a relocation entry. There was a hack in the test, duplicating the reloc type into what is normally the addend to make the test work when little-endian, but that hack fails for similar big-endian targets. This patch fixes that problem by arranging to emit 32-bit and 64-bit ELF relocs using .4byte and .8byte directives, chosen as appropriate for the ELF size. I've also bumped the reloc number tested to a higher unused value, and made the number more easily parameterised by target should that be necessary in the future. Whether REL or RELA relocs are used is now chosen by a new is_rela readelf test of an object file, rather than by lists of targets. * testsuite/lib/binutils-common.exp (is_elf64): Use directory of input file for readelf.out. (is_rela): New proc. * testsuite/binutils-all/objcopy.exp (elf64): Set new variable from first result of is_elf64 test. (reloc_format): Set using is_rela. (strip-13): Pass RELOC and ELF64 to assembler. (strip-14, strip-15): Use elf64 rather than calling is_elf64 again. * testsuite/binutils-all/strip-13.d: Run for more targets. * testsuite/binutils-all/strip-13mips64.s: Use RELOC and set addend to zero. * testsuite/binutils-all/strip-13rel.s: Use RELOC and ELF64. Don't add _NONE reloc. * testsuite/binutils-all/strip-13rela.s: Likewise.
2018-08-10Always use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZEH.J. Lu4-0/+156
For GNU_PROPERTY_STACK_SIZE, pr_datasz is the same as align_size, which is 8 bytes for 64-bit ELF binaries and 4 bytes for 32-bit ELF binaries, Use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZE to convert .note.gnu.property section. bfd/ PR binutils/23494 * elf-properties.c (elf_get_gnu_property_section_size): Always use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZE. (elf_write_gnu_properties): Likewise. binutils/ PR binutils/23494 * testsuite/binutils-all/x86-64/pr23494c.s: New file. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise.
2018-08-10Skip PR binutils/23494 tests for nacl targetsH.J. Lu9-0/+20
PR binutils/23494 tests pass "-O elf64-x86-64" and "-O elf32-x86-64" to objcopy which may not supported for nacl targets. This patch skips these tests for nacl targets. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Skip nacl targets. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise.
2018-08-08Convert .note.gnu.property section between ELF32 and ELF64H.J. Lu11-0/+210
.note.gnu.property section has different alignments and section sizes for 32-bit and 64-bit ELF binaries. This patch updated bfd_convert_section_size and bfd_convert_section_contents to properly convert .note.gnu.property section between 32-bit and 64-bit ELF binaries. bfd/ PR binutils/23494 * bfd.c (bfd_convert_section_size): Check BFD_DECOMPRESS after calling _bfd_elf_convert_gnu_property_size to convert .note.gnu.property section size. (bfd_convert_section_contents): Check BFD_DECOMPRESS after calling _bfd_elf_convert_gnu_properties to convert .note.gnu.property section. * elf-bfd.h (_bfd_elf_convert_gnu_property_size): New prototype. (_bfd_elf_convert_gnu_properties): Likewise. * elf-properties.c (elf_get_gnu_property_section_size): New function. (elf_write_gnu_properties): Likewise. (_bfd_elf_convert_gnu_property_size): Likewise. (_bfd_elf_convert_gnu_properties): Likewise. (_bfd_elf_link_setup_gnu_properties): Use elf_get_gnu_property_section_size and elf_write_gnu_properties. binutils/ PR binutils/23494 * testsuite/binutils-all/x86-64/pr23494a-x32.d: New file. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise.
2018-08-08Add support for DW_OP_GNU_variable_value to readelfKevin Buettner2-0/+24
As indicated by the subject, this patch adds support for the DWARF expression opcode DW_OP_GNU_variable_value to readelf. It's pretty much a copy/paste of DW_OP_call_ref with the obvious name changes for the printf statements. The FIXME comment comes from that copy/paste. binutils/ChangeLog: * dwarf.c (decode_location_expresion): Add case for DW_OP_GNU_variable_value.
2018-08-06Update binutils/MAINTAINERS for ARC.Claudiu Zissulescu1-0/+1
binutils/ * MAINTAINERS: Add myself as ARC maintainer.
2018-08-06[ARC] Add Tag_ARC_ATR_version.claziss2-0/+10
Add a new tag (Tag_ARC_ATR_version) used to indicate if current attributes are interpreted in GNU way. This attribute is used by Synopsys custom compiler to correctly identify and interpret the object attributes section as generated by GNU tools. gas/ 2017-08-02 Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (arc_set_public_attributes): Add Tag_ARC_ATR_version. (arc_convert_symbolic_attribute): Likewise. * testsuite/gas/arc/attr-arc600.d: Update test. * testsuite/gas/arc/attr-arc600_mul32x16.d: Likewise. * testsuite/gas/arc/attr-arc600_norm.d: Likewise. * testsuite/gas/arc/attr-arc601.d: Likewise. * testsuite/gas/arc/attr-arc601_mul32x16.d: Likewise. * testsuite/gas/arc/attr-arc601_mul64.d: Likewise. * testsuite/gas/arc/attr-arc601_norm.d: Likewise. * testsuite/gas/arc/attr-arc700.d: Likewise. * testsuite/gas/arc/attr-arcem.d: Likewise. * testsuite/gas/arc/attr-archs.d: Likewise. * testsuite/gas/arc/attr-autodetect-1.d: Likewise. * testsuite/gas/arc/attr-cpu-a601.d: Likewise. * testsuite/gas/arc/attr-cpu-a700.d: Likewise. * testsuite/gas/arc/attr-cpu-em.d: Likewise. * testsuite/gas/arc/attr-cpu-hs.d: Likewise. * testsuite/gas/arc/attr-em.d: Likewise. * testsuite/gas/arc/attr-em4.d: Likewise. * testsuite/gas/arc/attr-em4_dmips.d: Likewise. * testsuite/gas/arc/attr-em4_fpuda.d: Likewise. * testsuite/gas/arc/attr-em4_fpus.d: Likewise. * testsuite/gas/arc/attr-hs.d: Likewise. * testsuite/gas/arc/attr-hs34.d: Likewise. * testsuite/gas/arc/attr-hs38.d: Likewise. * testsuite/gas/arc/attr-hs38_linux.d: Likewise. * testsuite/gas/arc/attr-mul64.d: Likewise. * testsuite/gas/arc/attr-name.d: Likewise. * testsuite/gas/arc/attr-nps400.d: Likewise. * testsuite/gas/arc/attr-override-mcpu.d: Likewise. * testsuite/gas/arc/attr-quarkse_em.d: Likewise. bfd/ 2017-08-02 Claudiu Zissulescu <claziss@synopsys.com> * elf32-arc.c (arc_elf_merge_attributes): Handle Tag_ARC_ATR_version. binutils/ 2017-08-02 Claudiu Zissulescu <claziss@synopsys.com> * readelf.c (display_arc_attribute): Print Tag_ARC_ATR_version. include/ 2017-08-02 Claudiu Zissulescu <claziss@synopsys.com> * elf/arc.h (Tag_ARC_ATR_version): New tag. ld/ 2017-08-02 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/ld-arc/attr-merge-0.d: Update test. * testsuite/ld-arc/attr-merge-1.d: Likewise. * testsuite/ld-arc/attr-merge-2.d: Likewise. * testsuite/ld-arc/attr-merge-3.d: Likewise. * testsuite/ld-arc/attr-merge-5.d: Likewise.
2018-08-03Improve objcopy's ability to merge build notes.Nick Clifton2-3/+40
* objcopy.c (merge_gnu_build_notes): Delete empty notes. Merge identical function notes.
2018-08-01Add a note about regenerating the info files when creating a new release.Nick Clifton2-3/+8
* README-how-to-make-a-release: Add note about regenerating the info files prior to the release.
2018-07-31Correct previous update - new translation for the opcodes subdirectory.Nick Clifton2-1568/+10851
opcodes * po/sv.po: Updated Swedish translation.
2018-07-31Updated Swedish translation for the binutils sub-directory.Nick Clifton2-10851/+1568
* po/sv.po: Updated Swedish translation.
2018-07-30 * MAINTAINERS (C-SKY): Add Yunhai Shang as co-maintainer.Andrew Jenner2-0/+5
2018-07-30 * MAINTAINERS (C-SKY): Add Lifang Xia as maintainer.Andrew Jenner2-0/+5
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner2-0/+17
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
2018-07-25Fix potential memory leaks in some of the binutils source files.Nick Clifton4-61/+120
* rdcoff.c (parse_coff_struct_type): Free fields array upon early exit. (parse_coff_enum_type): Free names and vals arrays upon early exit. * rddbg.c (read_section_stabs_debugging_info): Free shandle and strings and stabs arrays upon early exit. * readelf.c (get_32bit_section_headers): Free shdrs structure upon early exit. (get_64bit_section_headers): Likewise. (get_32bit_elf_symbols): Generate an error if multiple symbol table index sections are associated with the same symbol section. (get_64bit_elf_symbols): Likewise. (process_dynamic_section): Generate an error if there are multiple dynamic symbol table sections, multiple dynamic string tables or multiple dynamic symbol information sections.
2018-07-24Updated French translation for ld/ and Swedish translation for binutils/Nick Clifton3-62/+79
bin * po/sv.po: Updated Swedish translation. ld * po/fr.po: Updated French translation.
2018-07-24PR23431, Messages composed from pieces can't be properly translatedAlan Modra3-10/+33
PR 23431 * dwarf.c (display_formatted_table): Replace "what" parameter with "is_dir". Expand messages. Fix capitalisation. * testsuite/binutils-all/dw5.W: Update expected output.
2018-07-24PR23430, Indices misspelledAlan Modra4-8/+19
PR 23430 include/ * elf/common.h (SHT_SYMTAB_SHNDX): Fix comment typo. bfd/ * dwarf2.c (dwarf_debug_section_enum): Fix comment typo. * elf.c (bfd_section_from_shdr, elf_sort_sections): Likewise. binutils/ * elfcomm.h (struct archive_info): Rename uses_64bit_indicies to uses_64bit_indices. * elfcomm.c (setup_archive): Update uses of above. * readelf.c (process_archive): Likewise. (get_section_type_name): Rename indicies to indices. (get_32bit_elf_symbols, get_64bit_elf_symbols): Likewise. (process_section_groups): Likewise. cpu/ * or1kcommon.cpu (spr-reg-indices): Fix description typo. opcodes/ * or1k-desc.h: Regenerate.
2018-07-21Update my e-mail address, limit maintenance to MIPS I-IV ISAsMaciej W. Rozycki2-1/+6
binutils/ * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV ISA maintenance. gdb/ * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV ISA maintenance. sim/ * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV ISA maintenance.
2018-07-20Close memory and resource leaks detected by coverity in the binutils directory.Nick Clifton3-3/+53
* objcopy.c (add_specific_symbols): Free buffer on exit. (add_redefine_syms_file): Close file handle on exit. (copy_object): Close file handle on early exit. Free buffer on early exit. Free gaps buffers once they are no longer needed. * dwarf.c (display_debug_frames): Free allocated memory on exit. (load_separate_debug_info): Free allocate memory on early exit.
2018-07-20MIPS/GAS: Split Loongson MMI Instructions from loongson2f/3aChenghua Xu2-0/+7
The MMI instruction set has been implemented in many Loongson processors. There is a lot of software optimized for MMI. This patch splits MMI from loongson2f/3a, and adds GAS and disassembler options for MMI instructions. 2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com> Maciej W. Rozycki <macro@mips.com> bfd/ * elfxx-mips.c (print_mips_ases): Add MMI extension. binutils/ * readelf.c (print_mips_ases): Add MMI extension. gas/ * NEWS: Mention MultiMedia extensions Instructions (MMI) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and OPTION_NO_LOONGSON_MMI. (md_longopts): Likewise. (mips_ases): Define availability for MMI. (mips_convert_ase_flags): Map ASE_LOONGSON_MMI to AFL_ASE_LOONGSON_MMI. (mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a. (md_show_usage): Add help for -mloongson-mmi and -mno-loongson-mmi. * doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi. * doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi, .set loongson-mmi and .set noloongson-mmi. * testsuite/gas/mips/loongson-2f.d: Move mmi test to ... * testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-2f.s: Move mmi test to ... * testsuite/gas/mips/loongson-2f-mmi.s: Here. * testsuite/gas/mips/loongson-3a.d: Move mmi test to ... * testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a.s: Move mmi test to ... * testsuite/gas/mips/loongson-3a-mmi.s: Here. * testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and loongson-3a-mmi tests. include/ * elf/mips.h (AFL_ASE_MMI): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI. * opcode/mips.h (ASE_LOONGSON_MMI): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add MMI to loongson2f and loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-mmi option. (print_mips_disassembler_options): Document -M loongson-mmi. * mips-opc.c (LMMI): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI instructions.
2018-07-19Remove myself from target-specific MAINTAINERSDJ Delorie2-2/+4
[binutils] * MAINTAINERS (RL78, RX): Remove myself as maintainer. [sim] * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
2018-07-19Stop potential memory leaks in dwarf CIE reader.Nick Clifton3-13/+26
* dwarf.c (read_cie): Free allocated memory before returning with a failure result.
2018-07-16Fix typo in NT_PPC_TM_CVSX note descriptionPedro Franco de Carvalho2-1/+6
2018-07-16 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> binutils/ * readelf.c (get_note_type): Fix typo in NT_PPC_TM_CVSX note description.
2018-07-16Update release making notes to metion checking for new top level files.Nick Clifton2-3/+15
* README-how-to-make-a-release: Add note to check for new top level files and add them to the src-release.sh script.
2018-07-14Update the notes on how to make a binutils release.Nick Clifton2-22/+41
* README-how-to-make-a-release: Updated with corrections based on the 2.31 release experience.
2018-07-12readelf: Don't print section type twice for --section-detailsFrancois H. Theron2-2/+6
* readelf.c (process_section_headers): Don't print section type twice for --section-details.
2018-07-10xgate testsuite fixesAlan Modra2-1/+7
binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_unique): Return zero for xgate. ld/ * testsuite/lib/ld-lib.exp (check_gc_sections_available): Return 0 for xgate. * testsuite/ld-elf/elf.exp: Add xgate to pr21703 xfails. * testsuite/ld-elf/shared.exp: Add xgate to pr21703 xfails. * testsuite/ld-discard/extern.d: xfail xgate. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/attributes.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr14156b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise.
2018-07-06Stop readelf from reporting gaps in the gnu build notes if the gap crosses a ↵Nick Clifton2-2/+28
section boundary. * readelf.c (same_section): New function. (print_gnu_build_attribute_description): Do not complain about gaps that cross a section boundary.
2018-07-05Updated Russian, Bulgarian, and Brazilian Portuguese translations for ↵Nick Clifton2-2010/+1610
various components of the binutuls. ld * po/bg.po: Updated Bulgarian translation. * po/pt_BR.po: Updated Brazilian Portuguese translation. binutils* po/bg.po: Updated Bulgarian translation. bfd,gas * po/ru.po: Updated Russian translation.
2018-07-02Fix use of "command line X" in binutils docThomas Preud'homme3-36/+42
Binutils documentation uses a mix of spelling for the compound word "command-line X". According to [1]: "Sometimes compound words are written separately (nail polish), sometimes with a hyphen (short-sighted) and sometimes as one word (eyelashes). Often new compounds are written as two separate words and, as they become more familiar, they are either connected with a hyphen (-) or made into one word." I think command-line X is common enough in our industry that the two workds command and line should be connected. Since command-line is more common than commandline, I propose to update binutils documentation to consistently use "command-line" when this is used as an adjective to a noun (eg. command-line argument, command-line switch, command-line option and command-line flag). I've left occurences of "the command line" as is. I've also left gdb, sim and readline alone and have only touched public documentation (texi and NEWS files). [1] http://dictionary.cambridge.org/grammar/british-grammar/word-formation/compounds 2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * doc/bfdint.texi: Use command-line consistently when used in a compount word. * doc/bfdsumm.texi: Likewise. binutils/ * NEWS: Use command-line consistently when used in a compount word. * doc/binutils.texi: Likewise and fix trailing whitespace on same line. gas/ * NEWS: Use command-line consistently when used in a compount word. * doc/as.texi: Likewise. * doc/c-aarch64.texi: Likewise. * doc/c-alpha.texi: Likewise. * doc/c-arc.texi: Likewise. * doc/c-arm.texi: Likewise. * doc/c-avr.texi: Likewise. * doc/c-bfin.texi: Likewise. * doc/c-cris.texi: Likewise. * doc/c-epiphany.texi: Likewise. * doc/c-i386.texi: Likewise. * doc/c-ia64.texi: Likewise. * doc/c-lm32.texi: Likewise. * doc/c-m32r.texi: Likewise. * doc/c-m68k.texi: Likewise. * doc/c-mips.texi: Likewise. * doc/c-mmix.texi: Likewise. * doc/c-msp430.texi: Likewise. * doc/c-mt.texi: Likewise. * doc/c-nios2.texi: Likewise. * doc/c-ppc.texi: Likewise. * doc/c-pru.texi: Likewise. * doc/c-rl78.texi: Likewise. * doc/c-rx.texi: Likewise. * doc/c-tic6x.texi: Likewise. * doc/c-v850.texi: Likewise. * doc/c-vax.texi: Likewise. * doc/c-visium.texi: Likewise. * doc/c-xstormy16.texi: Likewise. * doc/c-xtensa.texi: Likewise. * doc/c-z80.texi: Likewise. * doc/c-z8k.texi: Likewise. * doc/internals.texi: Likewise. gprof/ * gprof.texi: Use command-line consistently when used in a compount word. ld/ * NEWS: Use command-line consistently when used in a compount word. * ld.texinfo: Likewise. * ldint.texinfo: Likewise.
generated by cgit v1.1 at 2024-12-02 00:11:19 +0000