aboutsummaryrefslogtreecommitdiff
path: root/binutils
AgeCommit message (Collapse)AuthorFilesLines
2019-03-25Arm: Fix Arm disassembler mapping symbol search.Tamar Christina8-0/+223
Similar to the AArch64 patches the Arm disassembler has the same issues with out of order sections but also a few short comings. For one thing there are multiple code blocks to determine mapping symbols, and they all work slightly different, and neither fully correct. The first thing this patch does is centralise the mapping symbols search into one function mapping_symbol_for_insn. This function is then updated to perform a search in a similar way as AArch64. Their used to be a value has_mapping_symbols which was used to determine the default disassembly for objects that have no mapping symbols. The problem with the approach was that it was determining this value in the same loop that needed it, which is why this field could take on the states -1, 0, 1 where -1 means "don't know". However this means that until you actually find a mapping symbol or reach the end of the disassembly glob, you don't know if you did the right action or not, and if you didn't you can't correct it anymore. This is why the two jump-reloc-veneers-* testcases end up disassembling some insn as data when they shouldn't. Out of order here refers to an object file where sections are not listed in a monotonic increasing VMA order. The ELF ABI for Arm [1] specifies the following for mapping symbols: 1) A text section must always have a corresponding mapping symbol at it's start. 2) Data sections do not require any mapping symbols. 3) The range of a mapping symbol extends from the address it starts on up to the next mapping symbol (exclusive) or section end (inclusive). However there is no defined order between a symbol and it's corresponding mapping symbol in the symbol table. This means that while in general we look up for a corresponding mapping symbol, we have to make at least one check of the symbol below the address being disassembled. When disassembling different PCs within the same section, the search for mapping symbol can be cached somewhat. We know that the mapping symbol corresponding to the current PC is either the previous one used, or one at the same address as the current PC. However this optimization and mapping symbol search must stop as soon as we reach the end or start of the section. Furthermore if we're only disassembling a part of a section, the search is a allowed to search further than the current chunk, but is not allowed to search past it (The mapping symbol if there, must be at the same address, so in practice we usually stop at PC+4). lastly, since only data sections don't require a mapping symbol the default mapping type should be DATA and not INSN as previously defined, however if the binary has had all its symbols stripped than this isn't very useful. To fix this we determine the default based on the section flags. This will allow the disassembler to be more useful on stripped binaries. If there is no section than we assume you to be disassembling INSN. [1] https://developer.arm.com/docs/ihi0044/latest/elf-for-the-arm-architecture-abi-2018q4-documentation#aaelf32-table4-7 binutils/ChangeLog: * testsuite/binutils-all/arm/in-order-all.d: New test. * testsuite/binutils-all/arm/in-order.d: New test. * testsuite/binutils-all/arm/objdump.exp: Support .d tests. * testsuite/binutils-all/arm/out-of-order-all.d: New test. * testsuite/binutils-all/arm/out-of-order.T: New test. * testsuite/binutils-all/arm/out-of-order.d: New test. * testsuite/binutils-all/arm/out-of-order.s: New test. ld/ChangeLog: * testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Update disassembly. * testsuite/ld-arm/jump-reloc-veneers-long.d: Update disassembly. opcodes/ChangeLog: * arm-dis.c (struct arm_private_data): Remove has_mapping_symbols. (mapping_symbol_for_insn): Implement new algorithm. (print_insn): Remove duplicate code.
2019-03-25AArch64: Have -D override mapping symbol as documented.Tamar Christina4-16/+93
The documentation for -D says that on Arm platforms -D should disassemble data as instructions. "If the target is an ARM architecture this switch also has the effect of forcing the disassembler to decode pieces of data found in code sections as if they were instructions. " This makes it do as it says on the tincan so it's more consistent with aarch32. The usecase here is for baremetal developers who have created their instructions using .word directives instead if .insn. Though for Linux users I do find this behavior somewhat non-optimal. Perhaps there should be a new flag that just disassembles the values following the actual mapping symbol? binutils/ChangeLog: * testsuite/binutils-all/aarch64/in-order-all.d: New test. * testsuite/binutils-all/aarch64/out-of-order-all.d: New test. * testsuite/binutils-all/aarch64/out-of-order.d: opcodes/ChangeLog: * aarch64-dis.c (print_insn_aarch64): Implement override.
2019-03-25AArch64: Fix AArch64 disassembler mapping symbol searchTamar Christina3-1/+50
My previous patch for AArch64 was not enough to catch all the cases where disassembling an out-of-order section could go wrong. It had missed the case DATA sections could be incorrectly disassembled as TEXT. Out of order here refers to an object file where sections are not listed in a monotonic increasing VMA order. The ELF ABI for AArch64 [1] specifies the following for mapping symbols: 1) A text section must always have a corresponding mapping symbol at it's start. 2) Data sections do not require any mapping symbols. 3) The range of a mapping symbol extends from the address it starts on up to the next mapping symbol (exclusive) or section end (inclusive). However there is no defined order between a symbol and it's corresponding mapping symbol in the symbol table. This means that while in general we look up for a corresponding mapping symbol, we have to make at least one check of the symbol below the address being disassembled. When disassembling different PCs within the same section, the search for mapping symbol can be cached somewhat. We know that the mapping symbol corresponding to the current PC is either the previous one used, or one at the same address as the current PC. However this optimization and mapping symbol search must stop as soon as we reach the end or start of the section. Furthermore if we're only disassembling a part of a section, the search is a allowed to search further than the current chunk, but is not allowed to search past it (The mapping symbol if there, must be at the same address, so in practice we usually stop at PC+4). lastly, since only data sections don't require a mapping symbol the default mapping type should be DATA and not INSN as previously defined, however if the binary has had all its symbols stripped than this isn't very useful. To fix this we determine the default based on the section flags. This will allow the disassembler to be more useful on stripped binaries. If there is no section than we assume you to be disassembling INSN. [1] https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4#aaelf64-section4-5-4 binutils/ChangeLog: * testsuite/binutils-all/aarch64/in-order.d: New test. * testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as well. opcodes/ChangeLog: * aarch64-dis.c (print_insn_aarch64): Update the mapping symbol search order.
2019-03-25AArch64: Fix disassembler bug with out-of-order sectionsTamar Christina5-0/+77
The AArch64 disassembler has an optimization that it uses to reduce the amount it has to search for mapping symbols during disassembly. This optimization assumes that sections are listed in the section header in monotonic increasing VMAs. However this is not a requirement for the ELF specification. Because of this when such "out of order" sections occur the disassembler would pick the wrong mapping symbol to disassemble the section with. This fixes it by explicitly passing along the stop offset for the current disassembly glob and when this changes compared to the previous one we've seen the optimization won't be performed. In effect this restarts the search from a well defined starting point. Usually the symbol's address. The existing stop_vma can't be used for this as it is allowed to be unset and setting this unconditionally would change the semantics of this field. binutils/ChangeLog: * objdump.c (disassemble_bytes): Pass stop_offset. * testsuite/binutils-all/aarch64/out-of-order.T: New test. * testsuite/binutils-all/aarch64/out-of-order.d: New test. * testsuite/binutils-all/aarch64/out-of-order.s: New test. include/ChangeLog: * dis-asm.h (struct disassemble_info): Add stop_offset. opcodes/ChangeLog: * aarch64-dis.c (last_stop_offset): New. (print_insn_aarch64): Use stop_offset.
2019-03-19Prevent an illegal memory access by objdump when parsing a corrupt file on a ↵Nick Clifton2-7/+15
32-bit host. PR 24360 * objdump.c (load_specific_debug_section): Check that the amount of memory to be allocated matches the size of the section.
2019-03-13[BFD, LD, AArch64, 3/3] Add --pac-plt to enable PLTs protected with PAC.Sudakshina Das2-0/+8
This is part of the patch series to add support for BTI and PAC in AArch64 linker. 1) This patch adds new definitions of PAC enabled PLTs and both BTI and PAC enabled PLTs. 2) It also defines the new dynamic tag DT_AARCH64_PAC_PLT for the PAC enabled PLTs. 3) This patch adds a new ld command line option: --pac-plt. In the presence of this option, the linker uses the PAC enabled PLTs and marks with DT_AARCH64_PAC_PLT. 4) In case both BTI and PAC are enabled the linker should pick PLTs enabled with both and also use dynamic tags for both. All these are made according to the new AArch64 ELF ABI https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4 *** bfd/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elfnn-aarch64.c (PLT_PAC_ENTRY_SIZE, PLT_PAC_SMALL_ENTRY_SIZE): New. (PLT_BTI_PAC_ENTRY_SIZE, PLT_BTI_PAC_SMALL_ENTRY_SIZE): New. (setup_plt_values): Account for PAC or PAC and BTI enabled PLTs. (elfNN_aarch64_size_dynamic_sections): Add checks for PLT_BTI_PAC and PLT_PAC_PLT. (elfNN_aarch64_finish_dynamic_sections): Account for PLT_BTI_PAC. (get_plt_type): Add case for DT_AARCH64_PAC_PLT. (elfNN_aarch64_plt_sym_val): Add cases for PLT_BTI_PAC and PLT_PAC. *** binutils/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * readelf.c (get_aarch64_dynamic_type): Add case for DT_AARCH64_PAC_PLT. (dynamic_section_aarch64_val): Likewise. *** include/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elf/aarch64.h (DT_AARCH64_PAC_PLT): New. *** ld/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * NEWS: Document --pac-plt. * emultempl/aarch64elf.em (OPTION_PAC_PLT): New. (PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Add pac-plt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_PAC_PLT. * testsuite/ld-aarch64/aarch64-elf.exp: Add the following tests. * testsuite/ld-aarch64/bti-pac-plt-1.d: New test. * testsuite/ld-aarch64/bti-pac-plt-2.d: New test. * testsuite/ld-aarch64/pac-plt-1.d: New test. * testsuite/ld-aarch64/pac-plt-2.d: New test. * testsuite/ld-aarch64/bti-plt-1.s: Add .ifndef directive.
2019-03-13[BFD, LD, AArch64, 2/3] Add --force-bti to enable BTI and to select BTI ↵Sudakshina Das2-0/+39
enabled PLTs This is part of the patch series to add support for BTI and PAC in AArch64 linker. 1) This patch adds a new ld command line option: --force-bti. In the presence of this option, the linker enables BTI with the GNU_PROPERTY_AARCH64_FEATURE_1_BTI feature. This gives out warning in case of missing gnu notes for BTI in inputs. 2) It also defines a new set of BTI enabled PLTs. These are used either when all the inputs are marked with GNU_PROPERTY_AARCH64_FEATURE_1_BTI or when the new --force-bti option is used. This required adding new fields in elf_aarch64_link_hash_table so that we could make the PLT related information more generic. 3) It also defines a dynamic tag DT_AARCH64_BTI_PLT. The linker uses this whenever it picks BTI enabled PLTs. All these are made according to the new AArch64 ELF ABI https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4 *** bfd/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * bfd-in.h (aarch64_plt_type, aarch64_enable_bti_type): New. (aarch64_bti_pac_info): New. (bfd_elf64_aarch64_set_options): Add aarch64_bti_pac_info argument. (bfd_elf32_aarch64_set_options): Likewise. * bfd-in2.h: Regenerate * elfnn-aarch64.c (PLT_BTI_ENTRY_SIZE): New. (PLT_BTI_SMALL_ENTRY_SIZE, PLT_BTI_TLSDESC_ENTRY_SIZE): New. (elfNN_aarch64_small_plt0_bti_entry): New. (elfNN_aarch64_small_plt_bti_entry): New. (elfNN_aarch64_tlsdesc_small_plt_bti_entry): New. (elf_aarch64_obj_tdata): Add no_bti_warn and plt_type fields. (elf_aarch64_link_hash_table): Add plt0_entry, plt_entry and tlsdesc_plt_entry_size fields. (elfNN_aarch64_link_hash_table_create): Initialise the new fields. (setup_plt_values): New helper function. (bfd_elfNN_aarch64_set_options): Use new bp_info to set plt sizes and bti enable type. (elfNN_aarch64_allocate_dynrelocs): Use new size members instead of fixed macros. (elfNN_aarch64_size_dynamic_sections): Likewise and add checks. (elfNN_aarch64_create_small_pltn_entry): Use new generic pointers to plt stubs instead of fixed ones and update filling them according to the need for bti. (elfNN_aarch64_init_small_plt0_entry): Likewise. (elfNN_aarch64_finish_dynamic_sections): Likewise. (get_plt_type, elfNN_aarch64_get_synthetic_symtab): New. (elfNN_aarch64_plt_sym_val): Update size accordingly. (elfNN_aarch64_link_setup_gnu_properties): Set up plts if BTI GNU NOTE is set. (bfd_elfNN_get_synthetic_symtab): Define. (elfNN_aarch64_merge_gnu_properties): Give out warning with --force-bti and mising BTI NOTE SECTION. *** binutils/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * readelf.c (get_aarch64_dynamic_type): New. (get_dynamic_type): Use above for EM_AARCH64. (dynamic_section_aarch64_val): New. (process_dynamic_section): Use above for EM_AARCH64. *** include/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * elf/aarch64.h (DT_AARCH64_BTI_PLT): New. *** ld/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * NEWS: Document --force-bti. * emultempl/aarch64elf.em (plt_type, bti_type, OPTION_FORCE_BTI): New. (PARSE_AND_LIST_SHORTOPTS, PARSE_AND_LIST_OPTIONS): Add force-bti. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_FORCE_BTI. * testsuite/ld-aarch64/aarch64-elf.exp: Add all the tests below. * testsuite/ld-aarch64/bti-plt-1.d: New test. * testsuite/ld-aarch64/bti-plt-1.s: New test. * testsuite/ld-aarch64/bti-plt-2.s: New test. * testsuite/ld-aarch64/bti-plt-2.d: New test. * testsuite/ld-aarch64/bti-plt-3.d: New test. * testsuite/ld-aarch64/bti-plt-4.d: New test. * testsuite/ld-aarch64/bti-plt-5.d: New test. * testsuite/ld-aarch64/bti-plt-6.d: New test. * testsuite/ld-aarch64/bti-plt-7.d: New test. * testsuite/ld-aarch64/bti-plt-so.s: New test. * testsuite/ld-aarch64/bti-plt.ld: New test.
2019-03-13[BFD, LD, AArch64, 1/3] Add support for GNU PROPERTIES in AArch64 for BTI ↵Sudakshina Das2-0/+44
and PAC This is part of the patch series to add support for BTI and PAC in AArch64 linker. This patch implements the following: 1) This extends in the gnu property support in the linker for AArch64 by defining backend hooks for elf_backend_setup_gnu_properties, elf_backend_merge_gnu_properties and elf_backend_parse_gnu_properties. 2) It defines AArch64 specific GNU property GNU_PROPERTY_AARCH64_FEATURE_1_AND and 2 bit for BTI and PAC in it. 3) It also adds support in readelf.c to read and print these new GNU properties in AArch64. All these are made according to the new AArch64 ELF ABI https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4 *** bfd/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elf-properties.c (_bfd_elf_link_setup_gnu_properties): Exclude linker created inputs from merge. * elfnn-aarch64.c (struct elf_aarch64_obj_tdata): Add field for GNU_PROPERTY_AARCH64_FEATURE_1_AND properties. (elfNN_aarch64_link_setup_gnu_properties): New. (elfNN_aarch64_merge_gnu_properties): New. (elf_backend_setup_gnu_properties): Define for AArch64. (elf_backend_merge_gnu_properties): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Define. (_bfd_aarch64_elf_parse_gnu_properties): Define. (_bfd_aarch64_elf_merge_gnu_properties): Define. * elfxx-aarch64.h (_bfd_aarch64_elf_link_setup_gnu_properties): Declare. (_bfd_aarch64_elf_parse_gnu_properties): Declare. (_bfd_aarch64_elf_merge_gnu_properties): Declare. (elf_backend_parse_gnu_properties): Define for AArch64. *** binutils/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * readelf.c (decode_aarch64_feature_1_and): New. (print_gnu_property_note): Add case for AArch64 gnu notes. *** include/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elf/common.h (GNU_PROPERTY_AARCH64_FEATURE_1_AND): New. (GNU_PROPERTY_AARCH64_FEATURE_1_BTI): New. (GNU_PROPERTY_AARCH64_FEATURE_1_PAC): New. *** ld/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * NEWS: Document GNU_PROPERTY_AARCH64_FEATURE_1_BTI and GNU_PROPERTY_AARCH64_FEATURE_1_PAC. * testsuite/ld-aarch64/aarch64-elf.exp: Add run commands for new tests. * testsuite/ld-aarch64/property-bti-pac1.d: New test. * testsuite/ld-aarch64/property-bti-pac1.s: New test. * testsuite/ld-aarch64/property-bti-pac2.d: New test. * testsuite/ld-aarch64/property-bti-pac2.s: New test. * testsuite/ld-aarch64/property-bti-pac3.d: New test.
2019-03-12Don't use bfd_get_file_size in objdumpAlan Modra2-28/+16
Compressed debug sections can have uncompressed sizes that exceed the original file size, so we can't use bfd_get_file_size. objdump also used bfd_get_file_size to limit reloc section size, but I believe the underlying bug causing the PR22508 out of bounds buffer access was that we had an integer overflow when calculating the reloc buffer size. I've fixed that instead in most of the backends, som and vms-alpha being the exceptions. SOM and vmd-alpha have rather more serious bugs in their slurp_relocs routines that would need fixing first if we want to fuss about making them safe against fuzzed object files. The patch also fixes a number of other potential overflows by using the bfd_alloc2/malloc2/zalloc2 memory allocation functions. bfd/ * coffcode.h (buy_and_read): Delete unnecessary forward decl. Add nmemb parameter. Use bfd_alloc2. (coff_slurp_line_table): Use bfd_alloc2. Update buy_and_read calls. Delete assertion. (coff_slurp_symbol_table): Use bfd_alloc2 and bfd_zalloc2. (coff_slurp_reloc_table): Use bfd_alloc2. Update buy_and_read calls. * coffgen.c (coff_get_reloc_upper_bound): Ensure size calculation doesn't overflow. * elf.c (bfd_section_from_shdr): Use bfd_zalloc2. Style fix. (assign_section_numbers): Style fix. (swap_out_syms): Use bfd_malloc2. (_bfd_elf_get_reloc_upper_bound): Ensure size calculation doesn't overflow. (_bfd_elf_make_empty_symbol): Style fix. (elfobj_grok_stapsdt_note_1): Formatting. * elfcode.h (elf_object_p): Use bfd_alloc2. (elf_write_relocs, elf_write_shdrs_and_ehdr): Likewise. (elf_slurp_symbol_table): Use bfd_zalloc2. (elf_slurp_reloc_table): Use bfd_alloc2. (_bfd_elf_bfd_from_remote_memory): Use bfd_malloc2. * elf64-sparc (elf64_sparc_get_reloc_upper_bound): Ensure size calculation doesn't overflow. (elf64_sparc_get_dynamic_reloc_upper_bound): Likewise. * mach-o.c (bfd_mach_o_get_reloc_upper_bound): Likewise. * pdp11.c (get_reloc_upper_bound): Copy aoutx.h version. binutils/ * objdump.c (load_specific_debug_section): Don't compare section size against file size. (dump_relocs_in_section): Don't compare reloc size against file size. Print "failed to read relocs" on bfd_get_reloc_upper_bound error.
2019-03-05Fix a spelling mistake: "complaint" instead of "compliant".Nick Clifton2-1/+6
PR 24295 * doc/binutils.texi (ar cmdline): Fix spelling mistake.
2019-03-05Updated Swedish translation for the binutils sub-directory.Nick Clifton2-1698/+1802
2019-03-05Allow multiple tests to be run on systems with older versions of TCL installed.Matthew Malcomson2-4/+10
PR 24287 * testsuite/lib/binutils-common.exp (run_dump_test): Replace a use of "lmap" with a "foreach" loop.
2019-03-04Stop objcopy from attempting to copy thin archives.Nick Clifton2-0/+26
PR 24281 * objcopy.c (copy_archive): Do not copy thin archives.
2019-02-27Testsuite: Allow multiple lines of "as" in testsuite.Matthew Malcomson2-329/+365
Committed on behalf of Matthew Malcomson. This allows checking the command line parsing more easily than before by allowing many command line invokations from the same .d file. Each line is used as a set of flags, and the tests are ran against the output of the assembler with each set. Each line of assembler is treated as another set of tests (as if the test file were copied to another with a different #as: line). This patch includes some example uses where multiple testcases can be merged into one file using this new functionality. binutils/ChangeLog: * testsuite/lib/binutils-common.exp: Allow multiple "as" lines. gas/ChangeLog: * testsuite/gas/aarch64/dotproduct.d: Use multiple "as" lines. * testsuite/gas/aarch64/dotproduct_armv8_4.d: Remove. * testsuite/gas/aarch64/dotproduct_armv8_4.s: Remove. * testsuite/gas/aarch64/illegal-dotproduct.d: Use multiple "as" lines. * testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: Remove. * testsuite/gas/aarch64/ldst-rcpc.d: Use multiple "as" lines.
2019-02-25Extend objdump's --dwarf=follow-links option so that separate debug info ↵Nick Clifton13-55/+212
files will also be affected by other dump function, and symbol tables from separate debug info files will be used when disassembling the main file. * objdump.c (sym_ok): New function. (find_symbol_for_address): Use new function. (disassemble_section): Compare sections by name, not pointer. (dump_dwarf): Move code to initialise byte_get pointer and iterate over separate debug files from here to ... (dump_bfd): ... here. Add parameter indicating that a separate debug info file is being dumped. For main file, pull in the symbol tables from all separate debug info files. (display_object): Update call to dump_bfd. * doc/binutils.texi: Document extened behaviour of the --dwarf=follow-links option. * NEWS: Mention this new feature. * testsuite/binutils-all/objdump.WK2: Update expected output. * testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add options and dump file parameters. Add extra test. * testsuite/binutils-all/objdump.WK3: New file. * testsuite/binutils-all/readelf.exp: Change expected output for readelf -wKis test. * testsuite/binutils-all/readelf.wKis: New file.
2019-02-22Extend readelf and objdump so that they will display and follow multiple ↵Nick Clifton9-183/+377
links to separate debug information files. PR 23843 * dwarf.h (struct separate_info): New structure for containing information on separate debug info files. * dwarf.c (struct dwo_info): New structure for containing dwo links. (first_dwo_info): Chain of dwo_info structures. (first_separate_file): Chain of separate_info structures. (separate_debug_file, separate_debug_filename): Delete. (fetch_alt_indirect_string): Scan all separate debug info files for the requested string. (add_dwo_info): New function. (add_dwo_name): New function. (add_dwo_dir): New function. (add_dwo_id: New function. (free_dwo_info): New function. (read_and_display_attr_value): Store DWO data using the new functions. (load_debug_section_with_follow): If necessary, scan the list of separate debug info files for the requested section. (add_separate_debug_file): New function. (load_separate_debug_info): Call add_separate_debug_file to store the information on the newly loaded file. (load_dwo_file): Likewise. (load_separate_debif_file): Rename to load_separate_debug_files. Change return type to boolean. If following links then attempt to load all separate debug info files, not just the first one. (free_debug_memory): Release memory in dwo_info and separate_info chains. * objdump.c (dump_dwarf): Iterate over all loaded debg info files. * readelf.c (process_object): Likewise. * doc/debug.options.texi: Update descriptions of links and follow-links options. * testsuite/binutils-all/objdump.WK2: Update expected output. * testsuite/binutils-all/readelf.k2: Likewise. * NEWS: Announce the new feature.
2019-02-21Fix illegal memory accesses by readelf when parsing corrupt IA64 unwind ↵Nick Clifton2-6/+94
information. PR 24247 * unwind-ia64.c: Include sysdep.h. (unw_decode_x1): Check current pointer against end pointer before accessing memory. (unw_decode_x2): Likewise. (unw_decode_x3): Likewise. (unw_decode_x4): Likewise. (unw_decode_r2): Likewise. (unw_decode_p2_p5): Likewise. (unw_decode_p7_p10): Likewise. (unw_decode): Likewise.
2019-02-20Fix potential illegal memory access by readelf when parsing a binary ↵Nick Clifton2-7/+50
containing corrupt system tap notes. PR 24246 * readelf.c (print_stapsdt_note): Harden against corrupt notes.
2019-02-20Fix potential illegal memory access by readelf when parsing corrupt IA64 ↵Nick Clifton2-36/+50
unwind information. PR 24244 * unwind-ia64.c (unw_decode_uleb128): Add end parameter, use it to prevent walking off the end of the buffer. (unw_decode_x1): Add end paramter, pass it to unw_decode_uleb128. (unw_decode_x2): Likewise. (unw_decode_x3): Likewise. (unw_decode_x4): Likewise. (unw_decode_r2): Pass the end parameter to unw_decode_uleb128. (unw_decode_r3): Likewise. (unw_decode_p7_p10): Likewise. (unw_decode_b2): Likewise. (unw_decode_b3_x4): Likewise.
2019-02-20Fix a illegal memory access fault when parsing a corrupt MIPS option section ↵Nick Clifton2-0/+9
using readelf. PR 24243 * readelf.c (process_mips_specific): Check for an options section that is too small to even contain a single option.
2019-02-20Harden readelf's IA64 note display function so that it can handle corrupt notes.Nick Clifton2-18/+69
PR 24242 * readelf.c (print_ia64_vms_note): Harden against corrupt notes.
2019-02-20Unsigned integer overflows in readelf checksAlan Modra2-4/+14
PR 24132 PR 24138 * readelf.c (get_data): Avoid possibility of overflow when checking for a read that may extend past end of file. (process_program_headers): Likewise.
2019-02-20PR24233, Out of memoryAlan Modra2-1/+9
PR 24233 * objdump.c (dump_bfd_private_header): Print warning if bfd_print_private_bfd_data returns false.
2019-02-12Update description of how to make a release to include the use of the git ↵Nick Clifton2-74/+57
clean command. PR 23440 * README-how-to-make-a-release: Use git clean to delete spurious files from the local source repository.
2019-02-08binutils: Add new GNU format mode to `size` utilityAndrew Burgess5-38/+145
The size tool currently defaults to berkeley format output. However, this output format has a weird quirk, read-only data is counted against the text sections, not the data sections. The code offers no real explanation for why this is, but I'm reluctant to change it for two reasons, first, I'm assuming it probably makes sense in some case that I'm not thinking of (maybe a target where sections are not marked executable, and so there's no distinction between read-only data and code), and second, the code has been this way for at least 20 years, I worry that changing things now might cause more confusion than it solves. This commit then introduces a new output format for the size tool, this new format displays the results in a similar manor to the berkeley format, but counts read-only data in the data column, and only executable sections are counted in the text column. Given that this is a brand new output format I've gone ahead and simplified things a little, while the berkeley format displays the total twice, once in decimal and once in hex, the new display format just displays the total in decimal. Of course, there's still the '--radix' option which can be used to display all the results in hexadecimal or octal. I've called the new format 'gnu', so '--format=gnu' or '-G' are used to access it. binutils/ChangeLog: * size.c (berkeley_format): Delete. (enum output_format): New enum. (selected_output_format): New variable. (usage): Update to mention GNU format. (main): Update to extract options, and select format as needed. Handle GNU format where needed. (berkeley_sum): Renamed to... (berkeley_or_gnu_sum): ...this, and updated to handle both formats. (berkeley_format): Renamed to... (berkeley_or_gnu_format): ...this, and updated to handle both formats. (print_sizes): Handle GNU format. * doc/binutils.texi (size): Document new GNU format. * testsuite/binutils-all/size.exp: Add test of extended functionality. * NEWS: Mention new functionality.
2019-02-08binutils/size: Update example output in documentationAndrew Burgess2-3/+8
The example output from size in Berkeley format is out of date. The columns are now displayed right aligned. This patch updates the documentation to reflect reality. binutils/ChangeLog: * doc/binutils.texi (size): Update example output for Berkeley format output.
2019-02-07Move potentially obsolete BFD targets into the definitely obsolete section. ↵Nick Clifton2-1/+10
Add a note to the README-how-to-make-a-release document about doing this. bfd * config.bfd: Move the powerpc-lynxos and powerpc-windiss targets into the definitely obsolete list. binutils * README-how-to-make-a-release: Add a note about updating the obsolete targets in the bfd/config.bfd file.
2019-02-04Add more notes on how to make a releaseNick Clifton2-20/+78
2019-02-01Update binutils/MAINTAINERS for S12Z.John Darrington1-0/+1
binutils/ * MAINTAINERS: Add self as S12Z maintainer.
2019-01-25Prevent a potential illegal memory access in readelf when parsing a note ↵Nick Clifton2-13/+28
with a zero name size. PR 24131 * readelf.c (process_notes_at): Prevent an illegal memory access when the note's namesize is zero. (decode_tic6x_unwind_bytecode): Add code to handle the case where no registers are specified in a frame pop instruction.
2019-01-25Updated Bulgarian and Russian translations for some of the binutils ↵Nick Clifton2-1799/+1910
sub-directories
2019-01-23Updated translations for some of the binutils subdirectory.Nick Clifton3-3398/+3709
2019-01-21Updated translations for various binutils subdirectories.Nick Clifton3-1696/+1877
2019-01-19Change version to 2.32.51 and regenerate configure and pot files.Nick Clifton4-1674/+1798
2019-01-19Add markers for 2.32 branch to NEWS and ChangeLog files.Nick Clifton4-6/+13
2019-01-17Update objdump's --disassemble=<symbol> feature so that if <symbol> is a ↵Nick Clifton6-24/+212
function, the entire function will be disassembled, regardless of the presence of interveening symbols. * objdump.c (disassemble_section): When disassembling from a symbol only stop at the next symbol if the original symbol was not a function symbol. Otherwise continue disassembling until a new function is reached. * testsuite/binutils-all/objdump.exp: Add tests of extended functionality. * testsuite/binutils-all/disasm.s: New test source file.
2019-01-16RISC-V: Support ELF attribute for gas and readelf.Jim Wilson3-1/+113
2019-01-16 Kito Cheng <kito@andestech.com> Nelson Chu <nelson@andestech.com> bfd/ * elfnn-riscv.c (riscv_elf_obj_attrs_arg_type): New. (elf_backend_obj_attrs_vendor): Define. (elf_backend_obj_attrs_section_type): Likewise. (elf_backend_obj_attrs_section): Likewise. (elf_backend_obj_attrs_arg_type): Define as riscv_elf_obj_attrs_arg_type. * elfxx-riscv.c (riscv_estimate_digit): New. (riscv_estimate_arch_strlen1): Likewise. (riscv_estimate_arch_strlen): Likewise. (riscv_arch_str1): Likewise. (riscv_arch_str): Likewise. * elfxx-riscv.h (riscv_arch_str): Declare. binutils/ * readelf.c (get_riscv_section_type_name): New function. (get_section_type_name): Add handler for RISC-V. (riscv_attr_tag_t): Declare. (riscv_attr_tag): New. (display_riscv_attribute): New function. (process_attributes): Add handler for RISC-V. * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute section. gas/ * config/tc-riscv.c (DEFAULT_RISCV_ATTR): Define to 0 if not defined. (riscv_set_options): Add `arch_attr` field. (riscv_opts): Set default value for arch_attr. (riscv_write_out_arch_attr): New. (riscv_set_public_attributes): Likewise. (riscv_md_end): Likewise. (riscv_convert_symbolic_attribute): Likewise. (s_riscv_attribute): Likewise. (explicit_arch_attr): Likewise. (riscv_pseudo_table): Add .attribute to the table. (options): Add OPTION_ARCH_ATTR and OPTION_NO_ARCH_ATTR enumeration constants. (md_longopts): Add `march-attr' and `mno-arch-attr' options. (md_parse_option): Handle the new options. (md_show_usage): Document the `march-attr' option. * config/tc-riscv.h (md_end): Define as riscv_md_end (riscv_md_end): Declare. (CONVERT_SYMBOLIC_ATTRIBUTE): Define as riscv_convert_symbolic_attribute. (riscv_convert_symbolic_attribute): Declare. (start_assemble): Declare. * testsuite/gas/elf/elf.exp: Adjust test case for section2.e. * testsuite/gas/elf/section2.e-riscv: New. * testsuite/gas/riscv/attribute-01.d: New test * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-04.s: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-06.s: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-07.s: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-08.s: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-unknown.s: Likewise. * testsuite/gas/riscv/empty.l: Likewise. * doc/c-riscv.texi (.attribute): Add documentation. * configure.ac (--enable-default-riscv-attribute): New options. * configure: Re-generate. * config.in: Re-generate. include/ * elf/riscv.h (SHT_RISCV_ATTRIBUTES): Define. (Tag_RISCV_arch): Likewise. (Tag_RISCV_priv_spec): Likewise. (Tag_RISCV_priv_spec_minor): Likewise. (Tag_RISCV_priv_spec_revision): Likewise. (Tag_RISCV_unaligned_access): Likewise. (Tag_RISCV_stack_align): Likewise.
2019-01-10Stop objdump from displaying control codes embedded in symbol names.Nick Clifton2-26/+121
PR 23963 binutils* objdump.c (sanitize_string): New function. Removes control characters from symbol names. (dump_section_header): Use new function. (objdump_print_symname): Likewise. (objdump_print_addr_with_sym): Likewise. (show_line): Likewise. (disassemble_bytes): Likewise. (disassemble_section): Likewise. (load_specific_debug_section): Likewise. (read_section_stabs): Likewise. (print_section_stabs): Likewise. (dump_section): Likewise. (dump_reloc_set): Likewise. (dump_relocs_in_section): Likewise. (dump_bfd): Likewise. (display_any_bfd): Likewise. gas * testsuite/gas/mips/mips16-branch-absolute-1.d: Adjust for the fact that control characters are now displayed as escape sequences. * testsuite/gas/mips/mips16-e.d: Likewise. * testsuite/gas/mips/mips16-pcrel-0.d: Likewise. * testsuite/gas/mips/mips16-pcrel-1.d: Likewise. * testsuite/gas/mips/mips16-pcrel-delay-0.d: Likewise. * testsuite/gas/mips/mips16-pcrel-delay-1.d: Likewise. * testsuite/gas/mips/mips16-pcrel-n32-0.d: Likewise. * testsuite/gas/mips/mips16-pcrel-n32-1.d: Likewise. * testsuite/gas/mips/mips16-pcrel-n64-sym32-0.d: Likewise. * testsuite/gas/mips/mips16-pcrel-n64-sym32-1.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-0.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-1.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-delay-0.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-delay-1.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-n32-0.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-n32-1.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-n64-sym32-0.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-n64-sym32-1.d: Likewise. * testsuite/gas/mips/mipsel16-e.d: Likewise. * testsuite/gas/mips/mipsr6@msa.d: Likewise. * testsuite/gas/mips/mipsr6@relax-swap3.d: Likewise. * testsuite/gas/mips/r6-64-n32.d: Likewise. * testsuite/gas/mips/r6-64-n64.d: Likewise. * testsuite/gas/mips/r6-n32.d: Likewise. * testsuite/gas/mips/r6-n64.d: Likewise. * testsuite/gas/mips/r6.d: Likewise. * testsuite/gas/mips/tmips16-e.d: Likewise. * testsuite/gas/mips/tmipsel16-e.d: Likewise. * testsuite/gas/mn10300/relax.d: Likewise.
2019-01-09Correct PR number in changelog entry.Nick Clifton1-1/+1
2019-01-09Fix a heap use after free memory access fault when displaying error messages ↵Nick Clifton2-5/+14
about malformed archives. PR 14049 * readelf.c (process_archive): Use arch.file_name in error messages until the qualified name is available.
2019-01-09Adjust bfd/warning.m4 egrep patternsAndrew Paprocki2-5/+9
Adjust the `bfd/warning.m4` `egrep` patterns to handle preprocessors that do not define `__GNUC__`, leaving the string in the output. bfd/ * warning.m4: Adjust egrep pattern for non-GNU compilers. * configure: Regenerate. binutils/ * configure: Regenerate. gas/ * configure: Regenerate. gold/ * configure: Regenerate. gprof/ * configure: Regenerate. ld/ * configure: Regenerate. opcodes/ * configure: Regenerate.
2019-01-09cxxfilt test failuresAlan Modra2-29/+10
Fixes these: bfin-elf +FAIL: cxxfilt: demangling _Z1fIvJiELb0EEvPDOT1_EFT_DpT0_E bfin-elf +FAIL: cxxfilt: demangling _Z14int_if_addableI1YERiP1AIXszpldecvPT_Li0EdecvS4_Li0EEE h8300-elf +FAIL: cxxfilt: demangling _Z1fIvJiELb0EEvPDOT1_EFT_DpT0_E h8300-elf +FAIL: cxxfilt: demangling _Z14int_if_addableI1YERiP1AIXszpldecvPT_Li0EdecvS4_Li0EEE i686-pe +FAIL: cxxfilt: demangling _Z1fIvJiELb0EEvPDOT1_EFT_DpT0_E i686-pe +FAIL: cxxfilt: demangling _Z14int_if_addableI1YERiP1AIXszpldecvPT_Li0EdecvS4_Li0EEE i686-vxworks +FAIL: cxxfilt: demangling _Z1fIvJiELb0EEvPDOT1_EFT_DpT0_E i686-vxworks +FAIL: cxxfilt: demangling _Z14int_if_addableI1YERiP1AIXszpldecvPT_Li0EdecvS4_Li0EEE m32c-elf +FAIL: cxxfilt: demangling _Z1fIvJiELb0EEvPDOT1_EFT_DpT0_E m32c-elf +FAIL: cxxfilt: demangling _Z14int_if_addableI1YERiP1AIXszpldecvPT_Li0EdecvS4_Li0EEE * testsuite/binutils-all/cxxfilt.exp: Pass --no-strip-underscores unconditionally to tests needing the option rather than via a list of targets.
2019-01-08Remove support for old gnu v2 name mangling.Nick Clifton4-71/+53
PR 24044 * cxxfilt.c (hp_symbol_characters): Delete. (main): Remove depcreated demangling styles. * stabs.c (parse_stab_argtypes): Remove support for old gnu v2 demangling opnames. * testsuite/binutils-all/cxxfilt.exp: Use the --no-strip-underscore option for targets that do prefix their symbols with underscores. Update tests to elimiate those that use gnu v2 encoding.
2019-01-08Add testcase for PR/24065.Tamar Christina3-0/+15
This adds a new testcase for objcopy -O ihex to test that it correctly works. binutils/ChangeLog: PR 24065 * testsuite/binutils-all/copy-6.d: New test. * testsuite/binutils-all/objcopy.exp: Use it.
2019-01-08run_dump_test source in build directoryAlan Modra2-2/+8
Some existing tests build .s and .d files for run_dump_test, using an absolute #source: line in the .d file. This patch changes that scheme a little to instead use "#source: ./..." in .d files rather than "#source: $objdir/...", which is more useful in cases where the .d file is not generated. This allows RX gas test files to be built in the build directory, rather than in a source directory (which might be read-only). binutils/ * testsuite/lib/binutils-common.exp (run_dump_test): Don't prepend $srcdir/$subdir to source file name if it starts with "./". gas/ * testsuite/gas/rx/rx.exp: Create generated test source in current directory. * testsuite/gas/rx/Xtod.d, * testsuite/gas/rx/abs.d, * testsuite/gas/rx/adc.d, * testsuite/gas/rx/add.d, * testsuite/gas/rx/and.d, * testsuite/gas/rx/bclr.d, * testsuite/gas/rx/bcnd.d, * testsuite/gas/rx/bfmov.d, * testsuite/gas/rx/bmcnd.d, * testsuite/gas/rx/bnot.d, * testsuite/gas/rx/bra.d, * testsuite/gas/rx/brk.d, * testsuite/gas/rx/bset.d, * testsuite/gas/rx/bsr.d, * testsuite/gas/rx/btst.d, * testsuite/gas/rx/clrpsw.d, * testsuite/gas/rx/cmp.d, * testsuite/gas/rx/dabs.d, * testsuite/gas/rx/dadd.d, * testsuite/gas/rx/dbt.d, * testsuite/gas/rx/dcmp.d, * testsuite/gas/rx/ddiv.d, * testsuite/gas/rx/div.d, * testsuite/gas/rx/divu.d, * testsuite/gas/rx/dmov.d, * testsuite/gas/rx/dmul.d, * testsuite/gas/rx/dneg.d, * testsuite/gas/rx/dpopm.d, * testsuite/gas/rx/dpushm.d, * testsuite/gas/rx/dround.d, * testsuite/gas/rx/dsqrt.d, * testsuite/gas/rx/dsub.d, * testsuite/gas/rx/dtoX.d, * testsuite/gas/rx/emaca.d, * testsuite/gas/rx/emsba.d, * testsuite/gas/rx/emul.d, * testsuite/gas/rx/emula.d, * testsuite/gas/rx/emulu.d, * testsuite/gas/rx/fadd.d, * testsuite/gas/rx/fcmp.d, * testsuite/gas/rx/fdiv.d, * testsuite/gas/rx/fmul.d, * testsuite/gas/rx/fsqrt.d, * testsuite/gas/rx/fsub.d, * testsuite/gas/rx/ftoi.d, * testsuite/gas/rx/ftou.d, * testsuite/gas/rx/gprel.d, * testsuite/gas/rx/int.d, * testsuite/gas/rx/itof.d, * testsuite/gas/rx/jmp.d, * testsuite/gas/rx/jsr.d, * testsuite/gas/rx/machi.d, * testsuite/gas/rx/maclh.d, * testsuite/gas/rx/maclo.d, * testsuite/gas/rx/max.d, * testsuite/gas/rx/min.d, * testsuite/gas/rx/mov.d, * testsuite/gas/rx/movco.d, * testsuite/gas/rx/movli.d, * testsuite/gas/rx/movu.d, * testsuite/gas/rx/msbhi.d, * testsuite/gas/rx/msblh.d, * testsuite/gas/rx/msblo.d, * testsuite/gas/rx/mul.d, * testsuite/gas/rx/mulhi.d, * testsuite/gas/rx/mullh.d, * testsuite/gas/rx/mullo.d, * testsuite/gas/rx/mvfacgu.d, * testsuite/gas/rx/mvfachi.d, * testsuite/gas/rx/mvfaclo.d, * testsuite/gas/rx/mvfacmi.d, * testsuite/gas/rx/mvfc.d, * testsuite/gas/rx/mvfcp.d, * testsuite/gas/rx/mvfdc.d, * testsuite/gas/rx/mvfdr.d, * testsuite/gas/rx/mvtacgu.d, * testsuite/gas/rx/mvtachi.d, * testsuite/gas/rx/mvtaclo.d, * testsuite/gas/rx/mvtc.d, * testsuite/gas/rx/mvtcp.d, * testsuite/gas/rx/mvtdc.d, * testsuite/gas/rx/neg.d, * testsuite/gas/rx/nop.d, * testsuite/gas/rx/not.d, * testsuite/gas/rx/opecp.d, * testsuite/gas/rx/or.d, * testsuite/gas/rx/pop.d, * testsuite/gas/rx/popc.d, * testsuite/gas/rx/popm.d, * testsuite/gas/rx/push.d, * testsuite/gas/rx/pushc.d, * testsuite/gas/rx/pushm.d, * testsuite/gas/rx/r-bcc.d, * testsuite/gas/rx/r-bra.d, * testsuite/gas/rx/racl.d, * testsuite/gas/rx/racw.d, * testsuite/gas/rx/rdacl.d, * testsuite/gas/rx/rdacw.d, * testsuite/gas/rx/revl.d, * testsuite/gas/rx/revw.d, * testsuite/gas/rx/rmpa.d, * testsuite/gas/rx/rolc.d, * testsuite/gas/rx/rorc.d, * testsuite/gas/rx/rotl.d, * testsuite/gas/rx/rotr.d, * testsuite/gas/rx/round.d, * testsuite/gas/rx/rstr.d, * testsuite/gas/rx/rte.d, * testsuite/gas/rx/rtfi.d, * testsuite/gas/rx/rts.d, * testsuite/gas/rx/rtsd.d, * testsuite/gas/rx/sat.d, * testsuite/gas/rx/satr.d, * testsuite/gas/rx/save.d, * testsuite/gas/rx/sbb.d, * testsuite/gas/rx/sccnd.d, * testsuite/gas/rx/scmpu.d, * testsuite/gas/rx/setpsw.d, * testsuite/gas/rx/shar.d, * testsuite/gas/rx/shll.d, * testsuite/gas/rx/shlr.d, * testsuite/gas/rx/smovb.d, * testsuite/gas/rx/smovf.d, * testsuite/gas/rx/smovu.d, * testsuite/gas/rx/sstr.d, * testsuite/gas/rx/stnz.d, * testsuite/gas/rx/stz.d, * testsuite/gas/rx/sub.d, * testsuite/gas/rx/suntil.d, * testsuite/gas/rx/swhile.d, * testsuite/gas/rx/tst.d, * testsuite/gas/rx/utof.d, * testsuite/gas/rx/wait.d, * testsuite/gas/rx/xchg.d, * testsuite/gas/rx/xor.d: Add #source line. ld/ * testsuite/ld-elf/sec64k.exp: Use . rather than $objdir in generated source file names. * testsuite/ld-m68k/m68k-got.exp: Likewise.
2019-01-07Revert "Sync libiberty sources with master version in gcc repository. ↵Simon Marchi3-44/+24
Updated stabs demangling and cxxfilt tests to match." The previous commit breaks the GDB build, which is still using functions cplus_demangle_opname & co. Since removing these usages is not an obvious fix, let's revert this patch until we get rid of them.
2019-01-07Sync libiberty sources with master version in gcc repository. Updated stabs ↵Nick Clifton3-24/+44
demangling and cxxfilt tests to match. PR 24044 * stabs.c (parse_stab_argtypes): Remove call to cplus_mangle_opcode. * testsuite/binutils-all/cxxfilt.exp: Replace tests of v2 encoding with v3 encoding. Add escape for known failures.
2019-01-05RX: binutils - Add RXv3 support.Yoshinori Sato2-0/+5
* readelf.c (get_machine_flags): Add RXv3 output.
2019-01-04Fix a possible integer overflow problem when examining corrupt binaries ↵Nick Clifton2-3/+17
using a 32-bit binutil. PR 24005 * objdump.c (load_specific_debug_section): Check for integer overflow before attempting to allocate contents.
2019-01-04Fix ridiculously small memory leak.Nick Clifton3-1/+18
PR 24001 * objcopy.c (copy_object): Free dhandle after writing out the debug information. * objdump.c (dump_bfd): Free dhandle after printing out the debug information.
generated by cgit v1.1 at 2024-11-22 18:45:30 +0000