aboutsummaryrefslogtreecommitdiff
path: root/binutils/readelf.c
AgeCommit message (Collapse)AuthorFilesLines
2019-08-16PR24909, Uninitialized use on stack in readelfAlan Modra1-6/+3
PR 24909 PR 23499 * readelf.c (get_symbol_version_string): Set sym_info earlier.
2019-08-09Add support for a MIPS specific .MIPS.xhash section.Mihailo Stojanovic1-4/+48
This patch is a reimplementation of [1] which was submitted in 2015 by Neil Schellenberger. Copyright issue was sorted out [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (DT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering on the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word (ngnusyms) which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS-specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue as reported in [3], which is caused by the leading word added to the .MIPS.xhash section. Leading word is removed in this patch, and the number of entries in the translation table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is addressed by the corresponding glibc patch). Suggestions on coding style in [4] were taken into account. Existing GNU hash testcase was covered, and another one was added in the MIPS part of the testsuite. The other major change is reserving MIPS ABI version 5 for .MIPS.xhash, marking the need of support for .MIPS.xhash in the dynamic linker (again, addressed in the corresponding glibc patch). This is something which I am not sure of, especially after reading [5]. I am confused on whether this ABI version is reserved for IFUNC, or it can be used for this purpose. Already mentioned glibc patch is submitted at: https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html [4] https://sourceware.org/ml/binutils/2016-02/msg00097.html [5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section. * emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section. * emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section. * emultempl/mipself.em: Remove mips_after_parse function. * testsuite/ld-elf/hash.d: Update comment. * testsuite/ld-mips-elf/hash1.d: New test. * testsuite/ld-mips-elf/hash1.s: Ditto. * testsuite/ld-mips-elf/hash1a.d: Remove. * testsuite/ld-mips-elf/hash1b.d: Ditto. * testsuite/ld-mips-elf/hash1c.d: Ditto * testsuite/ld-mips-elf/hash2.d: New test. * testsuite/ld-mips-elf/mips-elf.exp: New tests. * testsuite/ld-mips-elf/start.s: New test. bfd * elf-bfd.h (struct elf_backend_data): New members. * elflink.c (_bfd_elf_link_create_dynamic_sections): Create .gnu.hash section if necessary. (struct collect_gnu_hash_codes): New member. (elf_gnu_hash_process_symidx): New function name. (elf_renumber_gnu_hash_syms): Ignore local and undefined symbols. Record xlat location for every symbol which should have a .MIPS.xhash entry. (bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to dynamic section if necessary. (GNU_HASH_SECTION_NAME): New define. (bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section. Update the section size info. * elfxx-mips.c (struct mips_elf_hash_sort_data): New members. (struct mips_elf_link_hash_entry): New member. (mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation table location. (mips_elf_sort_hash_table): Initialize the pointer to the .MIPS.xhash section. (mips_elf_sort_hash_table_f): Populate the .MIPS.xhash translation table entry with the symbol dynindx. (_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH. (_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section info. (_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash section. (_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to dynamic section. (_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH. (_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section sh_link info. (_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag. (MIPS_LIBC_ABI_XHASH): New ABI version enum value. (_bfd_mips_post_process_headers): Mark the ABI version as MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section, but not a .hash section. (_bfd_mips_elf_record_xhash_symbol): New function. Record a position in the translation table, associated with the hash entry. * elfxx-mips.h (literal_reloc_p): Define elf_backend_record_xhash_symbol backend hook. * elfxx-target.h: Initialize elf_backend_record_xhash_symbol backend hook. include * elf/mips.h (SHT_GNU_XHASH): New define. (DT_GNU_XHASH): New define. binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type. (get_mips_section_type_name): Return MI{S_XHASH name string. (dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic info. (process_symbol_table): Initialize the .MIPS.xhash section pointer. Adjust the readelf output to support the new section. (process_object): Set the .MIPS.xhash dynamic info to zero.
2019-08-08Change the output of readelf's note display so that the "Data size" column ↵Nick Clifton1-1/+1
header is left justified. PR 24887 binutils* readelf.c (process_notes_at): Left justify the "Data size" column heading. * testsuite/binutils-all/i386/empty.d: Adjust for new output format. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/pr21231a.d: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Likewise. * testsuite/binutils-all/i386/shstk.d: Likewise. * testsuite/binutils-all/note-2-32.d: Likewise. * testsuite/binutils-all/note-2-64.d: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. * testsuite/binutils-all/x86-64/shstk.d: Likewise. ld * testsuite/ld-aarch64/bti-plt-2.d: Adjust for new output format from readelf. * testsuite/ld-aarch64/bti-plt-4.d: Likewise. * testsuite/ld-aarch64/bti-plt-6.d: Likewise. * testsuite/ld-aarch64/bti-plt-7.d: Likewise. * testsuite/ld-aarch64/bti-warn.d: Likewise. * testsuite/ld-aarch64/property-bti-pac1.d: Likewise. * testsuite/ld-aarch64/property-bti-pac2.d: Likewise. * testsuite/ld-aarch64/property-bti-pac3.d: Likewise. * testsuite/ld-elf/x86-feature-1a.rd: Likewise. * testsuite/ld-elf/x86-feature-1b.rd: Likewise. * testsuite/ld-elf/x86-feature-1c.rd: Likewise. * testsuite/ld-elf/x86-feature-1d.rd: Likewise. * testsuite/ld-elf/x86-feature-1e.rd: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372a.d: Likewise. * testsuite/ld-i386/pr23372c.d: Likewise. * testsuite/ld-i386/pr23486a.d: Likewise. * testsuite/ld-i386/pr23486b.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-i386/pr24322a.d: Likewise. * testsuite/ld-i386/pr24322b.d: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-4a.d: Likewise. * testsuite/ld-i386/property-x86-5.d: Likewise. * testsuite/ld-i386/property-x86-cet1.d: Likewise. * testsuite/ld-i386/property-x86-cet2a.d: Likewise. * testsuite/ld-i386/property-x86-cet5a.d: Likewise. * testsuite/ld-i386/property-x86-cet5b.d: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-i386/property-x86-shstk1a.d: Likewise. * testsuite/ld-i386/property-x86-shstk1b.d: Likewise. * testsuite/ld-i386/property-x86-shstk2.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-shstk4.d: Likewise. * testsuite/ld-i386/property-x86-shstk5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/pr23372a-x32.d: Likewise. * testsuite/ld-x86-64/pr23372a.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23486a-x32.d: Likewise. * testsuite/ld-x86-64/pr23486a.d: Likewise. * testsuite/ld-x86-64/pr23486b-x32.d: Likewise. * testsuite/ld-x86-64/pr23486b.d: Likewise. * testsuite/ld-x86-64/pr23486c-x32.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr24322a-x32.d: Likewise. * testsuite/ld-x86-64/pr24322a.d: Likewise. * testsuite/ld-x86-64/pr24322b-x32.d: Likewise. * testsuite/ld-x86-64/pr24322b.d: Likewise. * testsuite/ld-x86-64/pr24458a-x32.d: Likewise. * testsuite/ld-x86-64/pr24458a.d: Likewise. * testsuite/ld-x86-64/pr24458b-x32.d: Likewise. * testsuite/ld-x86-64/pr24458b.d: Likewise. * testsuite/ld-x86-64/pr24458c-x32.d: Likewise. * testsuite/ld-x86-64/pr24458c.d: Likewise. * testsuite/ld-x86-64/property-1.r: Likewise. * testsuite/ld-x86-64/property-1a.r: Likewise. * testsuite/ld-x86-64/property-2.r: Likewise. * testsuite/ld-x86-64/property-2a.r: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-3a.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-4a.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-5a.r: Likewise. * testsuite/ld-x86-64/property-6.r: Likewise. * testsuite/ld-x86-64/property-7.r: Likewise. * testsuite/ld-x86-64/property-7a.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-4a.d: Likewise. * testsuite/ld-x86-64/property-x86-5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-5.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5.d: Likewise. gas * testsuite/gas/i386/property-1.d: Adjust for new output format from readelf. * testsuite/gas/i386/property-2.d: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. * testsuite/gas/i386/x86-64-property-2.d: Likewise.
2019-08-08readelf: mask unknown description data bytes.Jordan Rupprecht via binutils1-1/+1
When printing unknown note types, readelf prints the raw description section byte-by-byte. However, it does not mask appropriately, e.g. it prints the byte 'ba' as 'ffffffba'. * readelf.c (process_note): Mask unknown description data bytes.
2019-08-08Integer overflows in readelf get_dataAlan Modra1-8/+6
I noticed the test for overflow of amt = size * nmemb in get_data wasn't effective. An obvious example of nmemb = 3 and size = half max value overflows but doesn't result in amt < nmemb. This patch fixes this problem and reports a size truncation or overflow rather than out of memory in more cases. * readelf.c (get_data): Improve overflow checks.
2019-08-07PR24876, readelf: heap-buffer-overflow in dump_ia64_unwindAlan Modra1-1/+2
PR 24876 * readelf.c (dump_ia64_unwind): Check that buffer is large enough for "stamp" before reading.
2019-08-05Catch potential integer overflow in readelf when processing corrupt binaries.Nick Clifton1-1/+1
PR 24829 * readelf.c (apply_relocations): Catch potential integer overflow whilst checking reloc location against section size.
2019-08-02PR24871, readelf segv in dump_ia64_unwindAlan Modra1-7/+15
PR 24871 * readelf.c (ABSADDR): Delete. (dump_ia64_unwind): Expand ABSADDR. Check validity of info.section.
2019-07-25Stop an illegal memory access by readelf when parsing a corrupt MIPS binary ↵Nick Clifton1-4/+35
file. PR 24837 * readelf.c (process_mips_specific): Check for buffer overflow before reading reginfo information.
2019-07-23SHF_GNU_MBIND requires ELFOSABI_GNUAlan Modra1-43/+56
When SHF_GNU_MBIND was added in the SHF_LOOS to SHF_HIOS range, it should have required ELFOSABI_GNU since these flags are already in use by other OSes. HPUX SHF_HP_TLS in fact has the same value. That means no place in binutils should test SHF_GNU_MBIND without first checking OSABI, and SHF_GNU_MBIND should not be set without also setting OSABI. At least, that's the ideal, but the patch accepts SHF_GNU_MBIND on ELFOSABI_NONE object files since gas didn't always set OSABI. However, to reinforce the fact that SHF_GNU_MBIND isn't proper without a non-zero OSABI, readelf will display the flag as LOOS+0 if OSABI isn't set. The clash with SHF_HP_TLS means that hppa64-linux either has that flag on .tbss sections or supports GNU_MBIND, not both. (hppa64-linux users, if there are any, may have noticed that GNU ld since 2017 mysteriously aligned their .tbss sections to a 4k boundary. That was one consequence of SHF_HP_TLS being blindly interpreted as SHF_GNU_MBIND.) Since it seems that binutils, gdb, gcc, glibc, and the linux kernel don't care about SHF_HP_TLS I took that flag out of .tbss for hppa64-linux. bfd/ * elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_mbind. * elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_mbind. (get_program_header_size): Formatting. Only test SH_GNU_MBIND when elf_gnu_osabi_mbind is set. (_bfd_elf_map_sections_to_segments): Likewise. (_bfd_elf_init_private_section_data): Likewise. (_bfd_elf_final_write_processing): Update comment. * elf64-hppa.c (elf64_hppa_special_sections): Move .tbss entry. (elf_backend_special_sections): Define without .tbss for linux. binutils/ * readelf.c (get_parisc_segment_type): Split off hpux entries.. (get_ia64_segment_type): ..and these.. (get_hpux_segment_type): ..to here. (get_segment_type): Condition GNU_MBIND on osabi. Use get_hpux_segment_type. (get_symbol_binding): Do not print UNIQUE for ELFOSABI_NONE. (get_symbol_type): Do not print IFUNC for ELFOSABI_NONE. gas/ * config/obj-elf.c (obj_elf_change_section): Don't emit a fatal error for non-SHF_ALLOC SHF_GNU_MBIND here. (obj_elf_parse_section_letters): Return SHF_GNU_MBIND in new gnu_attr param. (obj_elf_section): Adjust obj_elf_parse_section_letters call. Formatting. Set SHF_GNU_MBIND and elf_osabi from gnu_attr. Emit normal error for non-SHF_ALLOC SHF_GNU_MBIND and wrong osabi. (obj_elf_type): Set elf_osabi for ifunc. * testsuite/gas/elf/section12a.d: xfail msp430 and hpux. * testsuite/gas/elf/section12b.d: Likewise. * testsuite/gas/elf/section13.d: Likewise. * testsuite/gas/elf/section13.l: Adjust expected error. ld/ * emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Condition SHF_GNU_MBIND on osabi. Set output elf_gnu_osabi_mbind.
2019-06-25readelf: avoid shadowing a libiberty symbolJan Beulich1-2/+2
With my (oldish) gcc I'm seeing .../binutils/readelf.c: In function ‘dump_ctf_indent_lines’: .../binutils/readelf.c:13851: error: declaration of ‘spaces’ shadows a global declaration .../binutils/../include/libiberty.h:253: error: shadowed declaration is here
2019-06-12Add support for NetBSD PaX notes to readelf.Christos Zoulas1-15/+32
PR 24663 * readelf.c (process_netbsd_elf_note): Add support for NT_NETBSD_PAX. (process_note): Add support for PaX notes.
2019-06-12Add support for NetBSD/sh3 core reg sections to readelf.Christos Zoulas1-0/+17
PR 24665 * readelf.c (get_netbsd_elfcore_note_type): Add support for SH core notes.
2019-06-12Add support to readelf to display NetBSD auxv notes in core files.Christos Zoulas1-10/+21
PR 24664 * readelf.c (get_netbsd_elfcore_note_type): Add support for NetBSD auxv notes.
2019-06-11Add support for reporting Alpha and Vax symbol visibility in readelf.Christos Zoulas1-0/+18
PR 24662 * readelf.c (get_alpha_symbol_other): New function. (get_symbol_other): Use for Alpha symbols. (is_32bit_pcrel_reloc): Add R_VAX_PCREL32.
2019-06-11Fix an unitinitalised local variable in decode_arm_unwind().Christos Zoulas1-0/+5
PR 24661 * readelf.c (decode_arm_unwind): Ensure that the local variable 'addr' is always initialised.
2019-06-03Revert patch that disables building libctf for non-ELF based targets.Nick Clifton1-22/+0
Revert: binutls 2019-05-29 Nick Clifton <nickc@redhat.com> * configure.ac (LIBCTF): Export. Set to empty for non-ELF based targets. (HAVE_LIBCTF): Define if libctf support is available. * Makefile.am (LIBCTF): Set value to @LIBCTF@. * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being defined. * readelf.c: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * config.in: Regenerate. top 2019-05-29 Nick Clifton <nickc@redhat.com> * configure.ac (noconfigdirs): Add libctf if the target does not use the ELF file format. * configure: Regenerate.
2019-05-31libctf: fix a number of build problems found on Solaris and NetBSDJose E. Marchesi1-3/+0
- Use of nonportable <endian.h> - Use of qsort_r - Use of zlib without appropriate magic to pull in the binutils zlib - Use of off64_t without checking (fixed by dropping the unused fields that need off64_t entirely) - signedness problems due to long being too short a type on 32-bit platforms: ctf_id_t is now 'unsigned long', and CTF_ERR must be used only for functions that return ctf_id_t - One lingering use of bzero() and of <sys/errno.h> All fixed, using code from gnulib where possible. Relatedly, set cts_size in a couple of places it was missed (string table and symbol table loading upon ctf_bfdopen()). binutils/ * objdump.c (make_ctfsect): Drop cts_type, cts_flags, and cts_offset. * readelf.c (shdr_to_ctf_sect): Likewise. include/ * ctf-api.h (ctf_sect_t): Drop cts_type, cts_flags, and cts_offset. (ctf_id_t): This is now an unsigned type. (CTF_ERR): Cast it to ctf_id_t. Note that it should only be used for ctf_id_t-returning functions. libctf/ * Makefile.am (ZLIB): New. (ZLIBINC): Likewise. (AM_CFLAGS): Use them. (libctf_a_LIBADD): New, for LIBOBJS. * configure.ac: Check for zlib, endian.h, and qsort_r. * ctf-endian.h: New, providing htole64 and le64toh. * swap.h: Code style fixes. (bswap_identity_64): New. * qsort_r.c: New, from gnulib (with one added #include). * ctf-decls.h: New, providing a conditional qsort_r declaration, and unconditional definitions of MIN and MAX. * ctf-impl.h: Use it. Do not use <sys/errno.h>. (ctf_set_errno): Now returns unsigned long. * ctf-util.c (ctf_set_errno): Adjust here too. * ctf-archive.c: Use ctf-endian.h. (ctf_arc_open_by_offset): Use memset, not bzero. Drop cts_type, cts_flags and cts_offset. (ctf_arc_write): Drop debugging dependent on the size of off_t. * ctf-create.c: Provide a definition of roundup if not defined. (ctf_create): Drop cts_type, cts_flags and cts_offset. (ctf_add_reftype): Do not check if type IDs are below zero. (ctf_add_slice): Likewise. (ctf_add_typedef): Likewise. (ctf_add_member_offset): Cast error-returning ssize_t's to size_t when known error-free. Drop CTF_ERR usage for functions returning int. (ctf_add_member_encoded): Drop CTF_ERR usage for functions returning int. (ctf_add_variable): Likewise. (enumcmp): Likewise. (enumadd): Likewise. (membcmp): Likewise. (ctf_add_type): Likewise. Cast error-returning ssize_t's to size_t when known error-free. * ctf-dump.c (ctf_is_slice): Drop CTF_ERR usage for functions returning int: use CTF_ERR for functions returning ctf_type_id. (ctf_dump_label): Likewise. (ctf_dump_objts): Likewise. * ctf-labels.c (ctf_label_topmost): Likewise. (ctf_label_iter): Likewise. (ctf_label_info): Likewise. * ctf-lookup.c (ctf_func_args): Likewise. * ctf-open.c (upgrade_types): Cast to size_t where appropriate. (ctf_bufopen): Likewise. Use zlib types as needed. * ctf-types.c (ctf_member_iter): Drop CTF_ERR usage for functions returning int. (ctf_enum_iter): Likewise. (ctf_type_size): Likewise. (ctf_type_align): Likewise. Cast to size_t where appropriate. (ctf_type_kind_unsliced): Likewise. (ctf_type_kind): Likewise. (ctf_type_encoding): Likewise. (ctf_member_info): Likewise. (ctf_array_info): Likewise. (ctf_enum_value): Likewise. (ctf_type_rvisit): Likewise. * ctf-open-bfd.c (ctf_bfdopen): Drop cts_type, cts_flags and cts_offset. (ctf_simple_open): Likewise. (ctf_bfdopen_ctfsect): Likewise. Set cts_size properly. * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.h: Likewise. * configure: Likewise.
2019-05-30Harmonize readelf's output for version sections.Nick Clifton1-2/+2
PR 24627 binutils * readelf.c (process_version_sections): Add 0x prefix to address display. Correct indentation. ld * testsuite/ld-elf/ver_def.vd: Update expected output.
2019-05-29Do not build libctf for targets that do not use the ELF file format.Nick Clifton1-1/+23
top * configure.ac (noconfigdirs): Add libctf if the target does not use the ELF file format. * configure: Regenerate. binutils* configure.ac (LIBCTF): Export. Set to empty for non-ELF based targets. (HAVE_LIBCTF): Define if libctf support is available. * Makefile.am (LIBCTF): Set value to @LIBCTF@. * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being defined. * readelf.c: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * config.in: Regenerate.
2019-05-28binutils: CTF support for objdump and readelfNick Alcock1-0/+206
This introduces CTF support for objdump and readelf. objdump has the following new arguments: --ctf=SECTION: display CTF in the given SECTION --ctf-parent=SECTION: name of CTF section that is the parent of this section readelf has the above, and these two as well: --ctf-symbols=SECTION: name of symbol table section (optional) --ctf-strings=SECTION: name of string table section (optional) (objdump can always use BFD machinery to determine the applicable string and symbol tables automatically, so these arguments are unnecessary.) Nearly all the work is done by the ctf_dump machinery in libctf: most of the remaining work is option-processing and section-reading, and thus is different for objdump and readelf: the minimal amount of similar code remaining is, in my view, too small to share, particularly given that objdump uses ctf_bfdopen() and readelf uses ctf_simple_open() since it doesn't have a bfd. I am not particularly satisfied with the way resources are freed in either of these (I was forced to do it at the top level, for lack of anywhere else to free resources allocated during option processing), but I can't see any better way to do it without introducing new infrastructure for no other purpose. There are essentially arbitrary ordering changes to the Makefile.in's order of libtool-related stuff that I can't get rid of, but they have no semantic effect. (It is possible that some hunks of these changes could be dropped, but that seems a bit risky to me.) binutils/ * objdump.c (ctf-api.h): New include. (dump_ctf_section_info): New variable. (dump_ctf_section_name): Likewise. (usage): Describe new options. (enum option_values): Add OPTION_CTF and OPTION_CTF_PARENT. (main): Use them to add --ctf and --ctf-parent. (read_section_stabs): Add new parameter, entsize_ptr. (find_stabs_section): Adjust accordingly. (make_ctfsect): New. (dump_ctf_indent_lines): New. (dump_ctf_archive_member): New. (dump_ctf): New. (dump_bfd): Call it. Free resources afterwards. * readelf.c (ctf-api.h): New include. (CTF_DUMP): New. (static bfd_boolean do_ctf): Likewise. (dump_ctf_parent_name): Likewise. (dump_ctf_symtab_name): Likewise. (dump_ctf_strtab_name): Likewise. (OPTION_CTF_DUMP): Likewise. (OPTION_CTF_PARENT): Likewise. (OPTION_CTF_SYMBOLS): Likewise. (OPTION_CTF_STRINGS): Likewise. (options): Add them. (usage): Likewise. (parse_args): Handle the new options, requesting CTF_DUMP. (process_section_contents): Handle CTF_DUMP. (shdr_to_ctf_sect): New. (dump_ctf_indent_lines): New. (dump_section_as_ctf): New. (main): Free resources. * Makefile.am (LIBCTF): New variable. (objdump_DEPENDENCIES): Use it. (readelf_DEPENDENCIES): Likewise. (objdump_LDADD): Likewise. (readelf_LDADD): Likewise. * aclocal.m4: Regenerated. * Makefile.in: Likewise. * doc/binutils.texi (objdump): Document the new options. (readelf): Likewise. * doc/ctf.options.texi: New. * doc/Makefile.in: Regenerated. * NEWS: Mention the new feature.
2019-05-27readelf group errors/warningsAlan Modra1-1/+1
I noticed that one of the readelf errors stopped processing of further group sections. This patch makes readelf continue on to other groups, like it does with the other errors. * readelf.c (process_section_groups): Continue processing groups when sh_entsize exceeds group size.
2019-05-24aarch64: add STO_AARCH64_VARIANT_PCS and DT_AARCH64_VARIANT_PCSSzabolcs Nagy1-0/+20
The bottom 2 bits of st_other are used for visibility, the top 6 bits are de facto reserved for processor specific use. This patch defines a bits to mark function symbols that follow a variant procedure call standard with different register usage convention. A dynamic tag is also defined that marks modules with R_<CLS>_JUMP_SLOT relocations referencing symbols marked with STO_AARCH64_VARIANT_PCS. This can be used by dynamic linkers that support lazy binding to decide what registers need to be preserved during symbol resolution. binutils/ChangeLog: * readelf.c (get_aarch64_dynamic_type): Handle DT_AARCH64_VARIANT_PCS. (get_aarch64_symbol_other): New, handles STO_AARCH64_VARIANT_PCS. (get_symbol_other): Call get_aarch64_symbol_other. include/ChangeLog: * elf/aarch64.h (DT_AARCH64_VARIANT_PCS): Define. (STO_AARCH64_VARIANT_PCS): Define.
2019-05-23binutils: add support for eBPFJose E. Marchesi1-0/+8
This patch adds support for ELF64 eBPF to readelf, and fixes a `nm' test to run properly in bpf-*-* targets. binutils/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * readelf.c: Include elf/bpf.h. (guess_is_rela): Hanle EM_BPF. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. * testsuite/binutils-all/nm.exp: Add bpf-*-* to the list of ELF targets.
2019-05-16[PATCH 1/57][Arm][GAS]: Add support for +mve and +mve.fpAndre Vieira1-0/+4
bfd/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add case for Tag_MVE_arch. binutils/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values. (arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch. elfcpp/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * arm.h (Tag_MVE_arch): Define new enum value. gas/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (mve_ext, mve_fp_ext): New features. (armv8_1m_main_ext_table): Add new extensions. (aeabi_set_public_attributes): Translate new features to new build attributes. (arm_convert_symbolic_attribute): Add Tag_MVE_arch. * doc/c-arm.texi: Document new extensions and new build attribute. include/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * elf/arm.h (Tag_MVE_arch): Define new enum value. * opcode/arm.h (FPU_MVE, FPU_MVE_FP): New MACROs for new features.
2019-04-15[binutils, ARM, 1/16] Add support for Armv8.1-M Mainline CLIAndre Vieira1-1/+1
The patch is straightforward, it does the following: - support the new Tag_CPU_arch build attribute value, ie.: + declare the new value + update all the asserts forcing logic to be reviewed for new architectures + create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and add mapping from Tag_CPU_arch to it + teach readelf about new Tag_CPU_arch value - declare armv8.1-m.main as a supported architecture value - define Armv8.1-M Mainline in terms of feature bits available - tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature bits available - update architecture-specific logic in gas and bfd guarded by the asserts mentioned above. - tests for all the above ChangeLog entries are as follows: *** bfd/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * archures.c (bfd_mach_arm_8_1M_MAIN): Define. * bfd-in2.h: Regenerate. * cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline. * elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline and update assert. (using_thumb2): Likewise. (using_thumb2_bl): Update assert. (arch_has_arm_nop): Likewise. (bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline. (tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging. *** binutils/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline. *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline Tag_CPU_arch build attribute value. Reindent. (get_aeabi_cpu_arch_from_fset): Update assert. (aeabi_set_public_attributes): Update assert for Tag_DIV_use logic. * testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test. *** include/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro. (MAX_TAG_CPU_ARCH): Set value to above macro. * opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro. (ARM_AEXT_V8_1M_MAIN): Likewise. (ARM_AEXT2_V8_1M_MAIN): Likewise. (ARM_ARCH_V8_1M_MAIN): Likewise. *** ld/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * testsuite/ld-arm/attr-merge-13.attr: New test. * testsuite/ld-arm/attr-merge-13a.s: New test. * testsuite/ld-arm/attr-merge-13b.s: New test. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
2019-04-08x86: Define GNU_PROPERTY_X86_ISA_1_AVX512_BF16H.J. Lu1-0/+3
Update assembler and readelf to support #define GNU_PROPERTY_X86_ISA_1_AVX512_BF16 (1U << 24) for AVX512_BF16. binutils/ * readelf.c (decode_x86_isa): Handle GNU_PROPERTY_X86_ISA_1_AVX512_BF16. * testsuite/binutils-all/i386/pr21231b.d: Updated. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. gas/ * config/tc-i386.c (output_insn): Support GNU_PROPERTY_X86_ISA_1_AVX512_BF16. * testsuite/gas/i386/property-2.s: Add AVX512_BF16 test. * testsuite/gas/i386/property-2.d: Updated. * testsuite/gas/i386/x86-64-property-2.d: Likewise. include/ * elf/common.h (GNU_PROPERTY_X86_ISA_1_AVX512_BF16): New.
2019-03-13[BFD, LD, AArch64, 3/3] Add --pac-plt to enable PLTs protected with PAC.Sudakshina Das1-0/+2
This is part of the patch series to add support for BTI and PAC in AArch64 linker. 1) This patch adds new definitions of PAC enabled PLTs and both BTI and PAC enabled PLTs. 2) It also defines the new dynamic tag DT_AARCH64_PAC_PLT for the PAC enabled PLTs. 3) This patch adds a new ld command line option: --pac-plt. In the presence of this option, the linker uses the PAC enabled PLTs and marks with DT_AARCH64_PAC_PLT. 4) In case both BTI and PAC are enabled the linker should pick PLTs enabled with both and also use dynamic tags for both. All these are made according to the new AArch64 ELF ABI https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4 *** bfd/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elfnn-aarch64.c (PLT_PAC_ENTRY_SIZE, PLT_PAC_SMALL_ENTRY_SIZE): New. (PLT_BTI_PAC_ENTRY_SIZE, PLT_BTI_PAC_SMALL_ENTRY_SIZE): New. (setup_plt_values): Account for PAC or PAC and BTI enabled PLTs. (elfNN_aarch64_size_dynamic_sections): Add checks for PLT_BTI_PAC and PLT_PAC_PLT. (elfNN_aarch64_finish_dynamic_sections): Account for PLT_BTI_PAC. (get_plt_type): Add case for DT_AARCH64_PAC_PLT. (elfNN_aarch64_plt_sym_val): Add cases for PLT_BTI_PAC and PLT_PAC. *** binutils/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * readelf.c (get_aarch64_dynamic_type): Add case for DT_AARCH64_PAC_PLT. (dynamic_section_aarch64_val): Likewise. *** include/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elf/aarch64.h (DT_AARCH64_PAC_PLT): New. *** ld/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * NEWS: Document --pac-plt. * emultempl/aarch64elf.em (OPTION_PAC_PLT): New. (PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Add pac-plt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_PAC_PLT. * testsuite/ld-aarch64/aarch64-elf.exp: Add the following tests. * testsuite/ld-aarch64/bti-pac-plt-1.d: New test. * testsuite/ld-aarch64/bti-pac-plt-2.d: New test. * testsuite/ld-aarch64/pac-plt-1.d: New test. * testsuite/ld-aarch64/pac-plt-2.d: New test. * testsuite/ld-aarch64/bti-plt-1.s: Add .ifndef directive.
2019-03-13[BFD, LD, AArch64, 2/3] Add --force-bti to enable BTI and to select BTI ↵Sudakshina Das1-0/+31
enabled PLTs This is part of the patch series to add support for BTI and PAC in AArch64 linker. 1) This patch adds a new ld command line option: --force-bti. In the presence of this option, the linker enables BTI with the GNU_PROPERTY_AARCH64_FEATURE_1_BTI feature. This gives out warning in case of missing gnu notes for BTI in inputs. 2) It also defines a new set of BTI enabled PLTs. These are used either when all the inputs are marked with GNU_PROPERTY_AARCH64_FEATURE_1_BTI or when the new --force-bti option is used. This required adding new fields in elf_aarch64_link_hash_table so that we could make the PLT related information more generic. 3) It also defines a dynamic tag DT_AARCH64_BTI_PLT. The linker uses this whenever it picks BTI enabled PLTs. All these are made according to the new AArch64 ELF ABI https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4 *** bfd/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * bfd-in.h (aarch64_plt_type, aarch64_enable_bti_type): New. (aarch64_bti_pac_info): New. (bfd_elf64_aarch64_set_options): Add aarch64_bti_pac_info argument. (bfd_elf32_aarch64_set_options): Likewise. * bfd-in2.h: Regenerate * elfnn-aarch64.c (PLT_BTI_ENTRY_SIZE): New. (PLT_BTI_SMALL_ENTRY_SIZE, PLT_BTI_TLSDESC_ENTRY_SIZE): New. (elfNN_aarch64_small_plt0_bti_entry): New. (elfNN_aarch64_small_plt_bti_entry): New. (elfNN_aarch64_tlsdesc_small_plt_bti_entry): New. (elf_aarch64_obj_tdata): Add no_bti_warn and plt_type fields. (elf_aarch64_link_hash_table): Add plt0_entry, plt_entry and tlsdesc_plt_entry_size fields. (elfNN_aarch64_link_hash_table_create): Initialise the new fields. (setup_plt_values): New helper function. (bfd_elfNN_aarch64_set_options): Use new bp_info to set plt sizes and bti enable type. (elfNN_aarch64_allocate_dynrelocs): Use new size members instead of fixed macros. (elfNN_aarch64_size_dynamic_sections): Likewise and add checks. (elfNN_aarch64_create_small_pltn_entry): Use new generic pointers to plt stubs instead of fixed ones and update filling them according to the need for bti. (elfNN_aarch64_init_small_plt0_entry): Likewise. (elfNN_aarch64_finish_dynamic_sections): Likewise. (get_plt_type, elfNN_aarch64_get_synthetic_symtab): New. (elfNN_aarch64_plt_sym_val): Update size accordingly. (elfNN_aarch64_link_setup_gnu_properties): Set up plts if BTI GNU NOTE is set. (bfd_elfNN_get_synthetic_symtab): Define. (elfNN_aarch64_merge_gnu_properties): Give out warning with --force-bti and mising BTI NOTE SECTION. *** binutils/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * readelf.c (get_aarch64_dynamic_type): New. (get_dynamic_type): Use above for EM_AARCH64. (dynamic_section_aarch64_val): New. (process_dynamic_section): Use above for EM_AARCH64. *** include/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * elf/aarch64.h (DT_AARCH64_BTI_PLT): New. *** ld/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> Szabolcs Nagy <szabolcs.nagy@arm.com> * NEWS: Document --force-bti. * emultempl/aarch64elf.em (plt_type, bti_type, OPTION_FORCE_BTI): New. (PARSE_AND_LIST_SHORTOPTS, PARSE_AND_LIST_OPTIONS): Add force-bti. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_FORCE_BTI. * testsuite/ld-aarch64/aarch64-elf.exp: Add all the tests below. * testsuite/ld-aarch64/bti-plt-1.d: New test. * testsuite/ld-aarch64/bti-plt-1.s: New test. * testsuite/ld-aarch64/bti-plt-2.s: New test. * testsuite/ld-aarch64/bti-plt-2.d: New test. * testsuite/ld-aarch64/bti-plt-3.d: New test. * testsuite/ld-aarch64/bti-plt-4.d: New test. * testsuite/ld-aarch64/bti-plt-5.d: New test. * testsuite/ld-aarch64/bti-plt-6.d: New test. * testsuite/ld-aarch64/bti-plt-7.d: New test. * testsuite/ld-aarch64/bti-plt-so.s: New test. * testsuite/ld-aarch64/bti-plt.ld: New test.
2019-03-13[BFD, LD, AArch64, 1/3] Add support for GNU PROPERTIES in AArch64 for BTI ↵Sudakshina Das1-0/+39
and PAC This is part of the patch series to add support for BTI and PAC in AArch64 linker. This patch implements the following: 1) This extends in the gnu property support in the linker for AArch64 by defining backend hooks for elf_backend_setup_gnu_properties, elf_backend_merge_gnu_properties and elf_backend_parse_gnu_properties. 2) It defines AArch64 specific GNU property GNU_PROPERTY_AARCH64_FEATURE_1_AND and 2 bit for BTI and PAC in it. 3) It also adds support in readelf.c to read and print these new GNU properties in AArch64. All these are made according to the new AArch64 ELF ABI https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4 *** bfd/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elf-properties.c (_bfd_elf_link_setup_gnu_properties): Exclude linker created inputs from merge. * elfnn-aarch64.c (struct elf_aarch64_obj_tdata): Add field for GNU_PROPERTY_AARCH64_FEATURE_1_AND properties. (elfNN_aarch64_link_setup_gnu_properties): New. (elfNN_aarch64_merge_gnu_properties): New. (elf_backend_setup_gnu_properties): Define for AArch64. (elf_backend_merge_gnu_properties): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Define. (_bfd_aarch64_elf_parse_gnu_properties): Define. (_bfd_aarch64_elf_merge_gnu_properties): Define. * elfxx-aarch64.h (_bfd_aarch64_elf_link_setup_gnu_properties): Declare. (_bfd_aarch64_elf_parse_gnu_properties): Declare. (_bfd_aarch64_elf_merge_gnu_properties): Declare. (elf_backend_parse_gnu_properties): Define for AArch64. *** binutils/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * readelf.c (decode_aarch64_feature_1_and): New. (print_gnu_property_note): Add case for AArch64 gnu notes. *** include/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * elf/common.h (GNU_PROPERTY_AARCH64_FEATURE_1_AND): New. (GNU_PROPERTY_AARCH64_FEATURE_1_BTI): New. (GNU_PROPERTY_AARCH64_FEATURE_1_PAC): New. *** ld/ChangeLog *** 2019-03-13 Sudakshina Das <sudi.das@arm.com> * NEWS: Document GNU_PROPERTY_AARCH64_FEATURE_1_BTI and GNU_PROPERTY_AARCH64_FEATURE_1_PAC. * testsuite/ld-aarch64/aarch64-elf.exp: Add run commands for new tests. * testsuite/ld-aarch64/property-bti-pac1.d: New test. * testsuite/ld-aarch64/property-bti-pac1.s: New test. * testsuite/ld-aarch64/property-bti-pac2.d: New test. * testsuite/ld-aarch64/property-bti-pac2.s: New test. * testsuite/ld-aarch64/property-bti-pac3.d: New test.
2019-02-22Extend readelf and objdump so that they will display and follow multiple ↵Nick Clifton1-8/+15
links to separate debug information files. PR 23843 * dwarf.h (struct separate_info): New structure for containing information on separate debug info files. * dwarf.c (struct dwo_info): New structure for containing dwo links. (first_dwo_info): Chain of dwo_info structures. (first_separate_file): Chain of separate_info structures. (separate_debug_file, separate_debug_filename): Delete. (fetch_alt_indirect_string): Scan all separate debug info files for the requested string. (add_dwo_info): New function. (add_dwo_name): New function. (add_dwo_dir): New function. (add_dwo_id: New function. (free_dwo_info): New function. (read_and_display_attr_value): Store DWO data using the new functions. (load_debug_section_with_follow): If necessary, scan the list of separate debug info files for the requested section. (add_separate_debug_file): New function. (load_separate_debug_info): Call add_separate_debug_file to store the information on the newly loaded file. (load_dwo_file): Likewise. (load_separate_debif_file): Rename to load_separate_debug_files. Change return type to boolean. If following links then attempt to load all separate debug info files, not just the first one. (free_debug_memory): Release memory in dwo_info and separate_info chains. * objdump.c (dump_dwarf): Iterate over all loaded debg info files. * readelf.c (process_object): Likewise. * doc/debug.options.texi: Update descriptions of links and follow-links options. * testsuite/binutils-all/objdump.WK2: Update expected output. * testsuite/binutils-all/readelf.k2: Likewise. * NEWS: Announce the new feature.
2019-02-20Fix potential illegal memory access by readelf when parsing a binary ↵Nick Clifton1-7/+47
containing corrupt system tap notes. PR 24246 * readelf.c (print_stapsdt_note): Harden against corrupt notes.
2019-02-20Fix a illegal memory access fault when parsing a corrupt MIPS option section ↵Nick Clifton1-0/+6
using readelf. PR 24243 * readelf.c (process_mips_specific): Check for an options section that is too small to even contain a single option.
2019-02-20Harden readelf's IA64 note display function so that it can handle corrupt notes.Nick Clifton1-18/+64
PR 24242 * readelf.c (print_ia64_vms_note): Harden against corrupt notes.
2019-02-20Unsigned integer overflows in readelf checksAlan Modra1-4/+6
PR 24132 PR 24138 * readelf.c (get_data): Avoid possibility of overflow when checking for a read that may extend past end of file. (process_program_headers): Likewise.
2019-01-25Prevent a potential illegal memory access in readelf when parsing a note ↵Nick Clifton1-13/+20
with a zero name size. PR 24131 * readelf.c (process_notes_at): Prevent an illegal memory access when the note's namesize is zero. (decode_tic6x_unwind_bytecode): Add code to handle the case where no registers are specified in a frame pop instruction.
2019-01-16RISC-V: Support ELF attribute for gas and readelf.Jim Wilson1-0/+100
2019-01-16 Kito Cheng <kito@andestech.com> Nelson Chu <nelson@andestech.com> bfd/ * elfnn-riscv.c (riscv_elf_obj_attrs_arg_type): New. (elf_backend_obj_attrs_vendor): Define. (elf_backend_obj_attrs_section_type): Likewise. (elf_backend_obj_attrs_section): Likewise. (elf_backend_obj_attrs_arg_type): Define as riscv_elf_obj_attrs_arg_type. * elfxx-riscv.c (riscv_estimate_digit): New. (riscv_estimate_arch_strlen1): Likewise. (riscv_estimate_arch_strlen): Likewise. (riscv_arch_str1): Likewise. (riscv_arch_str): Likewise. * elfxx-riscv.h (riscv_arch_str): Declare. binutils/ * readelf.c (get_riscv_section_type_name): New function. (get_section_type_name): Add handler for RISC-V. (riscv_attr_tag_t): Declare. (riscv_attr_tag): New. (display_riscv_attribute): New function. (process_attributes): Add handler for RISC-V. * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute section. gas/ * config/tc-riscv.c (DEFAULT_RISCV_ATTR): Define to 0 if not defined. (riscv_set_options): Add `arch_attr` field. (riscv_opts): Set default value for arch_attr. (riscv_write_out_arch_attr): New. (riscv_set_public_attributes): Likewise. (riscv_md_end): Likewise. (riscv_convert_symbolic_attribute): Likewise. (s_riscv_attribute): Likewise. (explicit_arch_attr): Likewise. (riscv_pseudo_table): Add .attribute to the table. (options): Add OPTION_ARCH_ATTR and OPTION_NO_ARCH_ATTR enumeration constants. (md_longopts): Add `march-attr' and `mno-arch-attr' options. (md_parse_option): Handle the new options. (md_show_usage): Document the `march-attr' option. * config/tc-riscv.h (md_end): Define as riscv_md_end (riscv_md_end): Declare. (CONVERT_SYMBOLIC_ATTRIBUTE): Define as riscv_convert_symbolic_attribute. (riscv_convert_symbolic_attribute): Declare. (start_assemble): Declare. * testsuite/gas/elf/elf.exp: Adjust test case for section2.e. * testsuite/gas/elf/section2.e-riscv: New. * testsuite/gas/riscv/attribute-01.d: New test * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-04.s: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-06.s: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-07.s: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-08.s: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-unknown.s: Likewise. * testsuite/gas/riscv/empty.l: Likewise. * doc/c-riscv.texi (.attribute): Add documentation. * configure.ac (--enable-default-riscv-attribute): New options. * configure: Re-generate. * config.in: Re-generate. include/ * elf/riscv.h (SHT_RISCV_ATTRIBUTES): Define. (Tag_RISCV_arch): Likewise. (Tag_RISCV_priv_spec): Likewise. (Tag_RISCV_priv_spec_minor): Likewise. (Tag_RISCV_priv_spec_revision): Likewise. (Tag_RISCV_unaligned_access): Likewise. (Tag_RISCV_stack_align): Likewise.
2019-01-09Fix a heap use after free memory access fault when displaying error messages ↵Nick Clifton1-5/+8
about malformed archives. PR 14049 * readelf.c (process_archive): Use arch.file_name in error messages until the qualified name is available.
2019-01-05RX: binutils - Add RXv3 support.Yoshinori Sato1-0/+2
* readelf.c (get_machine_flags): Add RXv3 output.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-12-14elf: Add PT_GNU_PROPERTY segment typeH.J. Lu1-16/+5
Linkers group input note sections with the same name into one output note section with the same name. One output note section is placed in one PT_NOTE segment. New linkers merge all input .note.gnu.property sections into one output .note.gnu.property section with a single NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older linkers treat input .note.gnu.property section as a generic note section and just concatenate all input .note.gnu.property sections into one output .note.gnu.property section without merging them, we may see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which are invalid. GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such that linker sets the bit for non-relocatable outputs. But it isn't sufficient: 1. It doesn't cover generic properties. 2. When -mx86-used-note=yes is passed to x86 assembler, the GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED property in object file and older linkers generate invalid NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit set. I am proposing the following changes: 1. Add PT_GNU_PROPERTY segment type: # define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) which covers .note.gnu.property section. 2. Remove GNU_PROPERTY_X86_UINT32_VALID. bfd/ PR ld/23900 * elf.c (get_program_header_size): Add a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. (_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. * elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set GNU_PROPERTY_X86_UINT32_VALID. binutils/ PR ld/23900 * readelf.c (get_segment_type): Support PT_GNU_PROPERTY. (decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID. (decode_x86_feature_1): Likewise. (decode_x86_feature_2): Likewise. (print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID check. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/i386/pr21231b.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. gas/ PR ld/23900 * config/tc-i386.c (x86_cleanup): Don't set GNU_PROPERTY_X86_UINT32_VALID. * testsuite/gas/i386/property-1.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. include/ PR ld/23900 * elf/common.h (PT_GNU_PROPERTY): New. (GNU_PROPERTY_X86_UINT32_VALID): Removed. ld/ PR ld/23900 * testsuite/ld-elf/elf.exp: Run PR ld/23900 test. * testsuite/ld-elf/pr23900-1-32.rd: New file. * testsuite/ld-elf/pr23900-1-64.rd: Likewise. * testsuite/ld-elf/pr23900-1.d: Likewise. * testsuite/ld-elf/pr23900-1.s: Likewise. * testsuite/ld-elf/pr23900-2.s: Likewise. * testsuite/ld-elf/pr23900-2a.d: Likewise. * testsuite/ld-elf/pr23900-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Adjusted. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372c.d: Expect <None> for GNU_PROPERTY_X86_ISA_1_USED. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. * testsuite/ld-x86-64/property-x86-5b.s: Likewise.
2018-12-01PR23946, illegal memory access in readelf.c:slurp_ia64_unwind_tableAlan Modra1-2/+20
PR 23946 * readelf.c (slurp_ia64_unwind_table): Bounds check symbol index on reloc. (slurp_hppa_unwind_table): Likewise.
2018-12-01PR23945, NULL pointer dereference in readelf.c:slurp_hppa_unwind_tableAlan Modra1-5/+17
PR 23945 * readelf.c (slurp_ia64_unwind_table): Don't call elf_ia64_reloc_type needlessly. (slurp_hppa_unwind_table): Use same range checks and error messages as slurp_ia64_unwind_table.
2018-11-27Handle ELF compressed header alignment correctly by setting up the section ↵Mark Wielaard1-18/+0
alignment correctly for the Elf32_Chdr or Elf64_Chdr type and respect the ch_addralign field when decompressing the section data. PR binutils/23919 binutils* readelf.c (dump_sections_as_strings): Remove bogus addralign check. (dump_sections_as_bytes): Likewise. (load_specific_debug_sections): Likewise. * testsuite/binutils-all/dw2-3.rS: Adjust alignment. * testsuite/binutils-all/dw2-3.rt: Likewise. bfd * bfd.c (bfd_update_compression_header): Explicitly set alignment. (bfd_check_compression_header): Add uncompressed_alignment_power argument. Check ch_addralign is a power of 2. * bfd-in2.h: Regenerated. * compress.c (bfd_compress_section_contents): Get and set orig_uncompressed_alignment_pow if section is decompressed. (bfd_is_section_compressed_with_header): Add and get uncompressed_align_pow_p argument. (bfd_is_section_compressed): Add uncompressed_align_power argument to bfd_is_section_compressed_with_header call. (bfd_init_section_decompress_status): Get and set uncompressed_alignment_power. * elf.c (_bfd_elf_make_section_from_shdr): Add uncompressed_align_power argument to bfd_is_section_compressed_with_header call.
2018-11-02Squash readelf warning on zero sh_link reloc sectionAlan Modra1-20/+20
On readelf examining a static executable built with current glibc, we get a silly warning. Section Headers: [Nr] Name Type Address Off Size ES Flg Lk Inf Al [ 0] NULL 0000000000000000 000000 000000 00 0 0 0 [ 1] .note.ABI-tag NOTE 0000000000400190 000190 000020 00 A 0 0 4 [ 2] .note.gnu.build-id NOTE 00000000004001b0 0001b0 000024 00 A 0 0 4 readelf: Warning: [ 3]: Link field (0) should index a symtab section. [ 3] .rela.plt RELA 00000000004001d8 0001d8 000228 18 AI 0 20 8 This .rela.plt section contains only IRELATIVE relocations (which have symbol index zero), so it isn't appropriate to warn. A zero sh_link section is deliberately chosen for such a section (see PR10337 and PR23850). So this patch disables the SHT_REL* sh_link warning. I've also removed the .rel.dyn/.rela.dyn section name test to disable the sh_info warning for SHT_REL* sections. While relocation sections in an executable need not specify the section they relocate (the relocation sh_offset field is an address, not a section offset), that isn't true in a relocatable file where sh_offset is relative to a section. If .rela.dyn happens to exist in an ET_REL object it must specify a valid section. * readelf.c (process_section_headers): Don't warn on a zero sh_info or sh_link for any reloc section in an executable or shared library. Do warn for .rel.dyn/.rela.dyn in ET_REL.
2018-10-23S12Z: New 32 bit Reloc.John Darrington1-1/+2
Third party tools produce 32 bit relocs at index 6 with strange properties. This change moves the existing 32 bit reloc (R_S12Z_EXT32) to index 7 and introduces a new one (R_S12Z_CW32) at index 6 to try to support code generated by these tools. * bfd/elf32-s12z.c (elf_s12z_howto_table) [R_S12Z_CW32]: New member. * binutils/readelf.c (is_32bit_abs_reloc): Reloc type 7 is also 32 bit. * include/elf/s12z.h (elf_s12z_reloc_tpe) [RELOC_NUMBER (R_S12Z_CW32)]: New enum.
2018-10-16PR23780, assertion abort in function display_raw_attributeAlan Modra1-1/+1
PR 23780 * readelf.c (display_raw_attribute): Correct assertion.
2018-10-10HPPA64 .PARISC.unwind entriesAlan Modra1-2/+2
.PARISC.unwind has 32-bit addresses in both 32-bit ELF and 64-bit ELF. Well, strictly speaking, the 32-bit "start" and "end" fields are segment relative offsets. (The 64-bit ABI says so, while the 32-bit ABI says they are addresses but it appears they are segment relative offsets in practice. Likely the 32-bit ABI lacks an update.) * readelf.c (hppa_process_unwind): Don't use eh_addr_size to calculate number of entries. (slurp_hppa_unwind_table): Don't use eh_addr_size here either.
2018-10-08Handle R_RISCV_32_PCREL in readelfAndreas Schwab1-0/+2
* readelf.c (is_32bit_pcrel_reloc): Handle R_RISCV_32_PCREL.
2018-09-22Revert part of commit 32ec8896025Alan Modra1-6/+1
echo "__thread char *p;" | gcc -c -g -xc - -o thread.o With current powerpc64le-linux-gcc has this reloc in .debug_info 0000000000000025 0000000d0000004e R_PPC64_DTPREL64 0000000000000000 p + 8000 That stops me looking at .debug_info. ~/build/gas-virgin/powerpc64le-linux/binutils/readelf -wi thread.o readelf: Warning: unable to apply unsupported reloc type 78 to section .debug_info Older readelf continued on after the warning, dumping .debug_info. * readelf.c (apply_relocations): Don't return FALSE for warnings.
generated by cgit v1.1 at 2024-11-27 06:40:41 +0000