aboutsummaryrefslogtreecommitdiff
path: root/bfd/bfd-in2.h
AgeCommit message (Collapse)AuthorFilesLines
2020-09-08MSP430: Support relocations for subtract expressions in .uleb128 directivesJozef Lawrynowicz1-0/+2
Link-time relaxations of branches are common for MSP430, given that GCC can generate pessimal branch instructions, and the -mcode-region=either/-mdata-region=either options to shuffle sections can further change the type of branch instruction required. These relaxations can result in invalid code when .uleb128 directives, used in the .gcc_except_table section, are used to calculate the distance between two labels. A value for the .uleb128 directive is calculated at assembly-time, and can't be updated at link-time, even if relaxation causes the distance between the labels to change. This patch adds relocations for subtract expressions in .uleb128 directives, to allow the linker to re-calculate the value of these expressions after relaxation has been performed. bfd/ChangeLog: * bfd-in2.h (bfd_reloc_code_real): Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128. * elf32-msp430.c (msp430_elf_ignore_reloc): New. (elf_msp430_howto_table): Add R_MSP430{,X}_GNU_{SET,SUB}_ULEB128. (msp430_reloc_map): Add R_MSP430_GNU_{SET,SUB}_ULEB128. (msp430x_reloc_map): Add R_MSP430X_GNU_{SET,SUB}_ULEB128. (write_uleb128): New. (msp430_final_link_relocate): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128. * libbfd.c (_bfd_write_unsigned_leb128): New. * libbfd.h (_bfd_write_unsigned_leb128): New prototype. Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128. * reloc.c: Document BFD_RELOC_MSP430_{SET,SUB}_ULEB128. binutils/ChangeLog: * readelf.c (target_specific_reloc_handling): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128. gas/ChangeLog: * config/tc-msp430.c (msp430_insert_uleb128_fixes): New. (msp430_md_end): Call msp430_insert_uleb128_fixes. include/ChangeLog: * elf/msp430.h (elf_msp430_reloc_type): Add R_MSP430_GNU_{SET,SUB}_ULEB128. (elf_msp430x_reloc_type): Add R_MSP430X_GNU_{SET,SUB}_ULEB128. ld/ChangeLog: * testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests. * testsuite/ld-msp430-elf/uleb128.s: New test. * testsuite/ld-msp430-elf/uleb128_430.d: New test. * testsuite/ld-msp430-elf/uleb128_430x.d: New test.
2020-09-08aarch64: Add base support for Armv8-RAlex Coplan1-0/+1
This patch adds the basic infrastructure needed to support Armv8-R in AArch64 binutils: new command-line flags, new feature bits, a new BFD architecture, and support for differentiating between architecture variants in the disassembler. The new command-line options added by this patch are -march=armv8-r in GAS and -m aarch64:armv8-r in objdump. The disassembler support is necessary since Armv8-R AArch64 introduces a system register (VSCTLR_EL2) which shares an encoding with a different system register (TTBR0_EL2) in Armv8-A. This also allows us to use the correct preferred disassembly for the new DFB alias introduced in Armv8-R. bfd/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * archures.c (bfd_mach_aarch64_8R): New. * bfd-in2.h: Regenerate. * cpu-aarch64.c (bfd_aarch64_arch_v8_r): New. (bfd_aarch64_arch_ilp32): Update tail pointer. gas/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * config/tc-aarch64.c (aarch64_archs): Add armv8-r. * doc/c-aarch64.texi: Document -march=armv8-r. include/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_A): New. (AARCH64_FEATURE_V8_R): New. (AARCH64_ARCH_V8): Include new A-profile feature bit. (AARCH64_ARCH_V8_R): New. opcodes/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * aarch64-dis.c (arch_variant): New. (determine_disassembling_preference): Disassemble according to arch variant. (select_aarch64_variant): New. (print_insn_aarch64): Set feature set.
2020-08-26bpf: add xBPF ISADavid Faust1-0/+1
This patch adds support for xBPF, another ISA targetting the BPF virtual architecture. For now, the primary difference between eBPF and xBPF is that xBPF supports indirect calls through the 'call %reg' form of the call instruction. bfd/ * archures.c (bfd_mach_xbpf): Define. * bfd-in2.h: Regenerate. * cpu-bpf.c (bfd_xbpf_arch) New. (bfd_bpf_arch) Update next in list field to point to xbpf arch. cpu/ * bpf.cpu (arch bpf): Add xbpf mach and isas. (define-xbpf-isa) New pmacro. (all-isas) Add xbpfle,xbpfbe. (endian-isas): New pmacro. (mach xbpf): New. (model xbpf-def): Likewise. (h-gpr): Add xbpf mach. (f-dstle, f-srcle, dstle, srcle): Add xbpfle isa. (f-dstbe, f-srcbe, dstbe, srcbe): Add xbpfbe isa. (define-alu-insn-un): Use new endian-isas pmacro. (define-alu-insn-bin, define-alu-insn-mov): Likewise. (define-endian-insn, define-lddw): Likewise. (dlind, dxli, dxsi, dsti): Likewise. (define-cond-jump-insn, define-call-insn): Likewise. (define-atomic-insns): Likewise. gas/ * config/tc-bpf.c: Add option -mxbpf to select xbpf isa. * testsuite/gas/bpf/indcall-1.d: New file. * testsuite/gas/bpf/indcall-1.s: Likewise. * testsuite/gas/bpf/indcall-bad-1.l: Likewise. * testsuite/gas/bpf/indcall-bad-1.s: Likewise. * testsuite/gas/bpf/bpf.exp: Run new tests. opcodes/ * bpf-desc.c: Regenerate. * bpf-desc.h: Likewise. * bpf-opc.c: Likewise. * bpf-opc.h: Likewise. * disassemble.c (disassemble_init_for_target): Set bits for xBPF ISA when appropriate.
2020-08-24CSKY: Add new arch CK860.Cooper Qu1-0/+1
bfd/ * bfd-in2.h (bfd_mach_ck860): New. * cpu-csky.c (arch_info_struct): Add item for CK860. gas/ * config/tc-csky.c (csky_archs): Add item for CK860, change ck810 and ck807's arch_flag. (csky_cpus): Add item for CK860. (md_begin): Enable DSP for CK810 and CK807 by default. (md_apply_fix): Fix CKCORE_TLS_IE32 relocation failure. * gas/testsuite/gas/csky/cskyv2_all.d: Change 'sync 0' to 'sync'. * gas/testsuite/gas/csky/cskyv2_all.s: Likewise. * gas/testsuite/gas/csky/cskyv2_ck860.d: New. * gas/testsuite/gas/csky/cskyv2_ck860.s: New. * gas/testsuite/gas/csky/enhance_dsp.d: Change plsli.u16 to plsli.16. * gas/testsuite/gas/csky/enhance_dsp.s: Likewise. include/ * opcode/csky.h (CSKYV2_ISA_10E60): New. (CSKY_ARCH_860): New. opcode/ * csky-dis.c (csky_find_inst_info): Skip CK860's instructions in other CPUs to speed up disassembling. * csky-opc.h (csky_v2_opcodes): Add CK860's instructions, Change plsli.u16 to plsli.16, change sync's operand format. Change-Id: I80ec1a9c0cc600d668082a9b91ae6d45b33ec0fc
2020-08-13PR26348, Malloc error in write_zerosAlan Modra1-0/+4
This adds a few more sanity checks on ELF objects, and a BFD flag to disable objcopy and strip when fuzzed input files belong in the "too hard" basket. bfd/ PR 26348 * bfd.c (struct bfd): Add read_only. * elfcode.h (elf_swap_shdr_in): Test both sh_offset and sh_size. Set read_only on warning. (elf_object_p): Sanity check program header alignment. Set read_only on warning. * bfd-in2.h: Regenerate. binutils/ PR 26348 * objcopy.c (copy_object): Report file name with endian error. Error and return on abfd->read_only.
2020-06-30Remove x86 NaCl target supportH.J. Lu1-4/+0
NaCl has been deprecated: https://developer.chrome.com/native-client/migration and NaCl will completely disappear in 2021: https://lists.llvm.org/pipermail/llvm-dev/2020-April/141107.html Remove x86 NaCl target support from bfd, binutils, gas and ld. bfd/ * archures.c (bfd_mach_i386_nacl): Removed. (bfd_mach_i386_i386_nacl): Likewise. (bfd_mach_x86_64_nacl): Likewise. (bfd_mach_x64_32_nacl): Likewise. * config.bfd: Remove *-*-nacl* targets. * configure.ac: Remove x86 NaCl target vectors. * cpu-i386.c (bfd_arch_i386_onebyte_nop_fill): Removed. (bfd_x64_32_nacl_arch): Likewise. (bfd_x86_64_nacl_arch): Likewise. (bfd_i386_nacl_arch): Likewise. (bfd_x64_32_arch_intel_syntax): Updated. * elf32-i386.c: Don't include "elf-nacl.h". (elf_i386_nacl_plt): Removed. (elf_i386_nacl_plt0_entry): Likewise. (elf_i386_nacl_plt_entry): Likewise. (elf_i386_nacl_pic_plt0_entry): Likewise. (elf_i386_nacl_pic_plt_entry): Likewise. (elf_i386_nacl_eh_frame_plt): Likewise. (elf_i386_nacl_plt): Likewise. (elf32_i386_nacl_elf_object_p): Likewise. (elf_i386_get_synthetic_symtab): Updated. (elf_i386_link_setup_gnu_properties): Likewise. * elf64-x86-64.c: Don't include "elf-nacl.h". (elf_x86_64_nacl_plt): Removed. (elf64_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_nacl_plt0_entry): Likewise. (elf_x86_64_nacl_plt_entry): Likewise. (elf_x86_64_nacl_eh_frame_plt): Likewise. (elf_x86_64_nacl_plt): Likewise. (elf32_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_get_synthetic_symtab): Updated. (elf_x86_64_link_setup_gnu_properties): Likewise. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Likewise. * targets.c: Remove x86 NaCl target vectors. * bfd-in2.h: Regenerated. * configure: Likewise. binutils/ * NEWS: Mention x86 NaCl target support removal. * dwarf.c (init_dwarf_regnames_by_bfd_arch_and_mach): Remove x86 NaCl target support. * testsuite/binutils-all/elfedit-1.d: Likewise. * testsuite/binutils-all/i386/i386.exp: Likewise. * testsuite/binutils-all/x86-64/objects.exp: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/x86-64.exp: Likewise. gas/ * NEWS: Mention x86 NaCl target support removal. * config/tc-i386.c: Remove x86 NaCl target support. * config/tc-i386.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/i386/i386.exp: Likewise. * testsuite/gas/i386/iamcu-1.d: Likewise. * testsuite/gas/i386/iamcu-2.d: Likewise. * testsuite/gas/i386/iamcu-3.d: Likewise. * testsuite/gas/i386/iamcu-4.d: Likewise. * testsuite/gas/i386/iamcu-5.d: Likewise. * testsuite/gas/i386/k1om.d: Likewise. * testsuite/gas/i386/l1om.d: Likewise. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c. Remove x86 NaCl dep files. * NEWS: Mention x86 NaCl target support removal. * configure.tgt: Remove x86 NaCl target support. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/elf.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-i386/align-branch-1.d: Likewise. * testsuite/ld-i386/export-class.exp: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-i386/load1.d: Likewise. * testsuite/ld-i386/pie1.d: Likewise. * testsuite/ld-i386/pr12570a.d: Likewise. * testsuite/ld-i386/pr12570b.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1l.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-i386/pr19636-2d.d: Likewise. * testsuite/ld-i386/pr19636-2e.d: Likewise. * testsuite/ld-i386/pr20244-1a.d: Likewise. * testsuite/ld-i386/pr20244-1b.d: Likewise. * testsuite/ld-i386/pr20244-2a.d: Likewise. * testsuite/ld-i386/pr20244-2b.d: Likewise. * testsuite/ld-i386/pr20244-2c.d: Likewise. * testsuite/ld-i386/pr20244-4a.d: Likewise. * testsuite/ld-i386/pr20244-4b.d: Likewise. * testsuite/ld-i386/pr21884.d: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc-10-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-10-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-11-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-11-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-12-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-12-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-13-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-13-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-15-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-15-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-20-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-20-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-21-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-8-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-8-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-9-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-x86-64/align-branch-1.d: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Likewise. * testsuite/ld-x86-64/line.exp: Likewise. * testsuite/ld-x86-64/load1a.d: Likewise. * testsuite/ld-x86-64/load1b.d: Likewise. * testsuite/ld-x86-64/load1c.d: Likewise. * testsuite/ld-x86-64/load1d.d: Likewise. * testsuite/ld-x86-64/pie3.d: Likewise. * testsuite/ld-x86-64/pr18160.d: Likewise. * testsuite/ld-x86-64/pr19013-x32.d: Likewise. * testsuite/ld-x86-64/pr19013.d: Likewise. * testsuite/ld-x86-64/pr19636-2d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1b.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1f.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr20253-1j.d: Likewise. * testsuite/ld-x86-64/pr20253-1l.d: Likewise. * testsuite/ld-x86-64/pr21884.d: Likewise. * testsuite/ld-x86-64/pr22393-3a.rd: Likewise. * testsuite/ld-x86-64/pr22393-3b.rd: Likewise. * testsuite/ld-x86-64/tlsgd10.dd: Likewise. * testsuite/ld-x86-64/tlsgd5.dd: Likewise. * testsuite/ld-x86-64/tlsgd8.dd: Likewise. * testsuite/ld-x86-64/x86-64.exp: Likewise. * emulparams/elf32_x86_64_nacl.sh: Removed. * emulparams/elf_i386_nacl.sh: Likewise. * emulparams/elf_x86_64_nacl.sh: Likewise. * testsuite/ld-i386/emit-relocs-nacl.rd: Likewise. * testsuite/ld-i386/load1-nacl.d: Likewise. * testsuite/ld-i386/pie1-nacl.d: Likewise. * testsuite/ld-i386/plt-nacl.pd: Likewise. * testsuite/ld-i386/plt-pic-nacl.pd: Likewise. * testsuite/ld-i386/pr17709-nacl.rd: Likewise. * testsuite/ld-i386/pr19636-1d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2c-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2e-nacl.d: Likewise. * testsuite/ld-i386/pr19827-nacl.rd: Likewise. * testsuite/ld-i386/pr21884-nacl.d: Likewise. * testsuite/ld-i386/pr21884-nacl.t: Likewise. * testsuite/ld-i386/tlsbin-nacl.rd: Likewise. * testsuite/ld-i386/tlsbin2-nacl.rd: Likewise. * testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsnopic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic2-nacl.rd: Likewise. * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise. * testsuite/ld-x86-64/load1a-nacl.d: Likewise. * testsuite/ld-x86-64/load1b-nacl.d: Likewise. * testsuite/ld-x86-64/load1c-nacl.d: Likewise. * testsuite/ld-x86-64/load1d-nacl.d: Likewise. * testsuite/ld-x86-64/pie3-nacl.d: Likewise. * testsuite/ld-x86-64/plt-nacl.pd: Likewise. * testsuite/ld-x86-64/pr17709-nacl.rd: Likewise. * testsuite/ld-x86-64/pr19013-nacl.d: Likewise. * testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise. * testsuite/ld-x86-64/pr19827-nacl.rd: Likewise. * testsuite/ld-x86-64/pr21884-nacl.d: Likewise. * testsuite/ld-x86-64/pr21884-nacl.t: Likewise. * testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.pd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise. * Makefile.in: Regenerated. * po/BLD-POTFILES.in: Likewise.
2020-06-06Rename PowerPC64 pcrel GOT TLS relocationsAlan Modra1-4/+4
These relocations should have had REL in their names, to reflect the fact that they are pc-relative. Fix that now by adding _PCREL. I've added some back-compatibility code to support anyone using .reloc with the old relocations. include/ * elf/ppc64.h (elf_ppc64_reloc_type): Rename R_PPC64_GOT_TLSGD34 to R_PPC64_GOT_TLSGD_PCREL34, R_PPC64_GOT_TLSLD34 to R_PPC64_GOT_TLSLD_PCREL34, R_PPC64_GOT_TPREL34 to R_PPC64_GOT_TPREL_PCREL34, and R_PPC64_GOT_DTPREL34 to R_PPC64_GOT_DTPREL_PCREL34. bfd/ * reloc.c: Rename BFD_RELOC_PPC64_GOT_TLSGD34 to BFD_RELOC_PPC64_GOT_TLSGD_PCREL34, BFD_RELOC_PPC64_GOT_TLSLD34 to BFD_RELOC_PPC64_GOT_TLSLD_PCREL34, BFD_RELOC_PPC64_GOT_TPREL34 to BFD_RELOC_PPC64_GOT_TPREL_PCREL34, BFD_RELOC_PPC64_GOT_DTPREL34 to BFD_RELOC_PPC64_GOT_DTPREL_PCREL34. * elf64-ppc.c: Update throughout for reloc renaming. (ppc64_elf_reloc_name_lookup): Handle old reloc names. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. gas/ * config/tc-ppc.c: Update throughout for reloc renaming. elfcpp/ * powerpc.h: Rename R_PPC64_GOT_TLSGD34 to R_PPC64_GOT_TLSGD_PCREL34, R_PPC64_GOT_TLSLD34 to R_PPC64_GOT_TLSLD_PCREL34, R_PPC64_GOT_TPREL34 to R_PPC64_GOT_TPREL_PCREL34, and R_PPC64_GOT_DTPREL34 to R_PPC64_GOT_DTPREL_PCREL34. gold/ * powerpc.cc: Update throughout for reloc renaming.
2020-05-20PR25993, read of freed memoryAlan Modra1-1/+1
ldmain.c:add_archive_element copies file name pointers from the bfd to a lang_input_statement_type. input->filename = abfd->filename; input->local_sym_name = abfd->filename; This results in stale pointers when twiddling the bfd filename in places like the pe ld after_open. So don't free the bfd filename, and make copies using bfd_alloc memory that won't result in small memory leaks that annoy memory checkers. PR 25993 bfd/ * archive.c (_bfd_get_elt_at_filepos): Don't strdup filename, use bfd_set_filename. * elfcode.h (_bfd_elf_bfd_from_remote_memory): Likewise. * mach-o.c (bfd_mach_o_fat_member_init): Likewise. * opncls.c (bfd_fopen, bfd_openstreamr, bfd_openr_iovec, bfd_openw), (bfd_create): Likewise. (_bfd_delete_bfd): Don't free filename. (bfd_set_filename): Copy filename param to bfd_alloc'd memory, return pointer to the copy or NULL on alloc fail. * vms-lib.c (_bfd_vms_lib_get_module): Free newname and test result of bfd_set_filename. * bfd-in2.h: Regenerate. gdb/ * solib-darwin.c (darwin_bfd_open): Don't strdup pathname for bfd_set_filename. * solib-aix.c (solib_aix_bfd_open): Use std::string for name passed to bfd_set_filename. * symfile-mem.c (add_vsyscall_page): Likewise for string passed to symbol_file_add_from_memory. (symbol_file_add_from_memory): Make name param a const char* and don't strdup. ld/ * emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Don't copy other_bfd_filename for bfd_set_filename, and test result of bfd_set_filename call. Don't create a new is->filename, simply copy from bfd filename. Free new_name after bfd_set_filename. * emultempl/pep.em (gld_${EMULATION_NAME}_after_open): Likewise.
2020-04-22xtensa: fix PR ld/25861Max Filippov1-1/+19
Introduce new relaxations XTENSA_PDIFF{8,16,32} for positive differences (subtracted symbol precedes diminished symbol) and XTENSA_NDIFF{8,16,32} for negative differences (subtracted symbol follows diminished symbol). Don't generate XTENSA_DIFF relocations in the assembler, generate XTENSA_PDIFF or XTENSA_NDIFF based on relative symbol position. Handle XTENSA_DIFF in BFD for compatibility with old object files. Handle XTENSA_PDIFF and XTENSA_NDIFF in BFD, treating difference value as unsigned. 2020-04-22 Max Filippov <jcmvbkbc@gmail.com> bfd/ * bfd-in2.h: Regenerated. * elf32-xtensa.c (elf_howto_table): New entries for R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}. (elf_xtensa_reloc_type_lookup, elf_xtensa_do_reloc) (relax_section): Add cases for R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}. * libbfd.h (bfd_reloc_code_real_names): Add names for BFD_RELOC_XTENSA_PDIFF{8,16,32} and BFD_RELOC_XTENSA_NDIFF{8,16,32}. * reloc.c: Add documentation for BFD_RELOC_XTENSA_PDIFF{8,16,32} and BFD_RELOC_XTENSA_NDIFF{8,16,32}. binutils/ * readelf.c (is_none_reloc): Recognize BFD_RELOC_XTENSA_PDIFF{8,16,32} and BFD_RELOC_XTENSA_NDIFF{8,16,32}. gas/ * config/tc-xtensa.c (md_apply_fix): Replace BFD_RELOC_XTENSA_DIFF{8,16,32} generation with BFD_RELOC_XTENSA_PDIFF{8,16,32} and BFD_RELOC_XTENSA_NDIFF{8,16,32} generation. * testsuite/gas/xtensa/loc.d: Replace BFD_RELOC_XTENSA_DIFF16 with BFD_RELOC_XTENSA_PDIFF16 in the expected output. include/ * elf/xtensa.h (elf_xtensa_reloc_type): New entries for R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}. ld/ * testsuite/ld-xtensa/relax-loc.d: New test definition. * testsuite/ld-xtensa/relax-loc.s: New test source. * testsuite/ld-xtensa/xtensa.exp (relax-loc): New test.
2020-04-18bfd_is_const_section thinkoAlan Modra1-1/+3
* section.c (bfd_is_const_section): Correct test for special sections. * bfd-in2.h: Regenerate.
2020-04-02coff-go32-exe: support variable-length stubsJan W. Jagersma1-3/+2
The stub size in GO32 executables has historically been fixed at 2048 bytes, due to hardcoded limitations in bfd. Recent patches to djgpp by Stas Sergeev (CC'd) have pushed the stub right up to this limit, so if any further expansion is desired, this must first be patched in bfd. This series includes three patches: The first changes the meaning of the bfd->origin field slightly, so that target code can use this to specify an offset into the file where the actual bfd is located. The second patch then uses this to enable support for variable-sized stubs in the coff-go32-exe format. The final patch is only a cleanup, it normalizes function and variable names in coff-stgo32.c so that they all begin with the same prefix. bfd * bfdio.c (bfd_bread, bfd_tell, bfd_seek, bfd_mmap): Always add bfd->origin to file offset. * bfdwin.c (bfd_get_file_window): Likewise. * bfd.c: Clarify the use of the bfd->origin field. * bfd-in2.h: Regenerate. * coff-i386.c: Don't include go32exe.h. Allow overriding coff_write_object_contents via COFF_WRITE_CONTENTS. * coff-stgo32.c (go32exe_cleanup, go32exe_mkobject) (go32exe_write_object_contents): New functions. (go32exe_temp_stub, go32exe_temp_stub_size): New static globals. (COFF_WRITE_CONTENTS, GO32EXE_DEFAULT_STUB_SIZE): Define. (create_go32_stub): Remove check for 2k size limit. Read stub from go32exe_temp_stub if present. (go32_stubbed_coff_bfd_copy_private_bfd_data): Allocate and copy variable-length stub. (go32_check_format): Read stub to go32exe_temp_stub, set origin, return go32exe_cleanup. (adjust_filehdr_in_post, adjust_filehdr_out_pre) (adjust_filehdr_out_post, adjust_scnhdr_in_post) (adjust_scnhdr_out_pre, adjust_scnhdr_out_post) (adjust_aux_in_post, adjust_aux_out_pre, adjust_aux_out_post): Remove functions and their associated #defines. * coffcode.h (coff_mkobject_hook): Remove stub copying code. * libcoff-in.h: (struct coff_tdata): New field stub_size. Rename field go32stub to stub. * libcoff.h: Regenerate. * coff-stgo32.c (go32_check_format): Rename to... (go32exe_check_format): ...this. (go32_stubbed_coff_bfd_copy_private_bfd_data): Rename to... (go32exe_copy_private_bfd_data): ...this. (stub_bytes): Rename to... (go32exe_default_stub): ...this. (create_go32_stub): Rename to... (go32exe_create_stub): ...this. * coff-stgo32.c (go32exe_copy_private_bfd_data): Avoid realloc when possible. include * coff/go32exe.h: Remove file. * coff/internal.h (struct internal_filehdr): Remove field go32stub. Remove flag F_GO32STUB.
2020-03-24bfd: Add a bfd_boolean argument to bfd_get_symbol_version_stringH.J. Lu1-2/+3
We can't call _bfd_elf_get_symbol_version_name from nm.c since it isn't available for all target configurations. This patch add a bfd_boolean argument to bfd_get_symbol_version_string instead. bfd/ PR binutils/25708 * elf-bfd.h (_bfd_elf_get_symbol_version_name): Renamed to ... (_bfd_elf_get_symbol_version_string): This. * elf.c (_bfd_elf_get_symbol_version_name): Renamed to ... (_bfd_elf_get_symbol_version_string): This. (bfd_elf_print_symbol): Pass TRUE to _bfd_elf_get_symbol_version_string. * libbfd-in.h (_bfd_nosymbols_get_symbol_version_string): Add a bfd_boolean argument. * syms.c (_bfd_nosymbols_get_symbol_version_string): Likewise. * targets.c (_bfd_get_symbol_version_string): Likewise. (bfd_get_symbol_version_string): Likewise. * bfd-in2.h: Regenerated. binutils/ PR binutils/25708 * nm.c (print_symname): Replace _bfd_elf_get_symbol_version_name with bfd_get_symbol_version_string. (print_symbo): Pass TRUE to bfd_get_symbol_version_string. * objdump.c (objdump_print_symname): Likewise.
2020-03-14BFD_FAKE_SECTIONS formattingAlan Modra1-14/+12
After the ld non-contiguous memory support my regen of bfd-in2.h didn't match exactly what was committed, so I took the opportunity to line up all the comments. * section.c (BFD_FAKE_SECTIONS): Formatting. * bfd-in2.h: Regenerate.
2020-03-13Add support for non-contiguous memory regionsChristophe Lyon1-1/+8
2020-01-06 Christophe Lyon <christophe.lyon@linaro.org> bfd/ * bfd-in2.h: Regenerate. * section.c (asection): Add already_assigned field. (BFD_FAKE_SECTION): Add default initializer for it. * ecoff.c (bfd_debug_section): Initialize already_assigned field. * elf32-arm.c (arm_build_one_stub): Add support for non_contiguous_regions. * elf32-csky.c (csky_build_one_stub): Likewise. * elf32-hppa.c (hppa_build_one_stub): Likewise. * elf32-m68hc11.c (m68hc11_elf_build_one_stub): Likewise. * elf32-m68hc12.c (m68hc12_elf_build_one_stub): Likewise. * elf32-metag.c (metag_build_one_stub): Likewise. * elf32-nios2.c (nios2_build_one_stub): Likewise. * elf64-ppc.c (ppc_build_one_stub): Likewise. (ppc_size_one_stub): Likewise. * elfnn-aarch64.c (aarch64_build_one_stub): Likewise. * elflink.c (elf_link_input_bfd): Likewise. include/ * bfdlink.h (bfd_link_info): Add non_contiguous_regions and non_contiguous_regions_warnings fields. ld/ * ldlang.c (lang_add_section): Add support for non_contiguous_regions. (size_input_section): Likewise. (lang_size_sections_1): Likewise. (process_insert_statements): Likewise. * ldlex.h (option_values): Add OPTION_NON_CONTIGUOUS_REGIONS and OPTION_NON_CONTIGUOUS_REGIONS_WARNINGS. * lexsup.c (ld_options): Add entries for --enable-non-contiguous-regions and --enable-non-contiguous-regions-warnings. (parse_args): Handle it. * NEWS: Add --enable-non-contiguous-regions and --enable-non-contiguous-regions-warnings. * ld.texi: Add --enable-non-contiguous-regions and --enable-non-contiguous-regions-warnings documentation. * emultempl/armelf.em (elf32_arm_add_stub_section): Add SEC_LINKER_CREATED flag. * emultempl/xtensaelf.em (ld_build_required_section_dependence): Emit an error when --enable-non-contiguous-regions is used. * testsuite/ld-elf/non-contiguous.d: New. * testsuite/ld-elf/non-contiguous.ld: New. * testsuite/ld-elf/non-contiguous.s: New. * testsuite/ld-arm/arm-elf.exp: Run the new tests. * testsuite/ld-arm/arm-elf/non-contiguous-arm.s: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm.d: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm.ld: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm2.d: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm3.ld: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm3.d: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm3.ld: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm4.d: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm4.ld: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm5.d: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm5.ld: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm6.d: New. * testsuite/ld-arm/arm-elf/non-contiguous-arm6.ld: New. * testsuite/ld-powerpc/powerpc.exp: Run new tests. * testsuite/ld-powerpc/non-contiguous-powerpc.d: New. * testsuite/ld-powerpc/non-contiguous-powerpc.ld: New. * testsuite/ld-powerpc/non-contiguous-powerpc.sd: New. * testsuite/ld-powerpc/non-contiguous-powerpc64.d: New.
2020-03-02bfd_cleanup for object_pAlan Modra1-3/+5
The object_p (and archive_p, core_file_p) functions are not supposed to have any target specific malloc'd memory attached to the bfd on their return. This should be obvious on a failure return, but it's also true for a successful return. The reason is that even though the object_p recognises the file, that particular target may not be used and thus the bfd won't be closed calling close_and_cleanup for the target that allocated the memory. It turns out that the object_p bfd_target* return value isn't needed. In all cases except ld/plugin.c the target is abfd->xvec and with ld/plugin.c the target isn't used. So this patch returns a cleanup function from object_p instead, called in bfd_check_format_matches to tidy the bfd before trying a different target match. The only cleanup that does anything at this stage is the alpha-vms one. bfd/ * targets.c (bfd_cleanup): New typedef. (struct bfd <_bfd_check_format>): Return a bfd_cleanup. * libbfd-in.h (_bfd_no_cleanup): Define. * format.c (bfd_reinit): Add cleanup parameter, call it. (bfd_check_format_matches): Set cleanup from _bfd_check_format call and pass to bfd_reinit. Delete temp, use abfd->xvec instead. * aout-target.h (callback, object_p): Return bfd_cleanup. * aout-tic30.c (tic30_aout_callback, tic30_aout_object_p): Likewise. * archive.c (bfd_generic_archive_p): Likewise. * binary.c (binary_object_p): Likewise. * coff-alpha.c (alpha_ecoff_object_p): Likewise. * coff-ia64.c (ia64coff_object_p): Likewise. * coff-rs6000.c (_bfd_xcoff_archive_p, rs6000coff_core_p): Likewise. * coff-sh.c (coff_small_object_p): Likewise. * coff-stgo32.c (go32_check_format): Likewise. * coff64-rs6000.c (xcoff64_archive_p, rs6000coff_core_p), (xcoff64_core_p): Likewise. * coffgen.c (coff_real_object_p, coff_object_p): Likewise. * elf-bfd.h (bfd_elf32_object_p, bfd_elf32_core_file_p), (bfd_elf64_object_p, bfd_elf64_core_file_p): Likewise. * elfcode.h (elf_object_p): Likewise. * elfcore.h (elf_core_file_p): Likewise. * i386msdos.c (msdos_object_p): Likewise. * ihex.c (ihex_object_p): Likewise. * libaout.h (some_aout_object_p): Likewise. * libbfd-in.h (bfd_generic_archive_p, _bfd_dummy_target), (_bfd_vms_lib_alpha_archive_p, _bfd_vms_lib_ia64_archive_p): Likewise. * libbfd.c (_bfd_dummy_target): Likewise. * libcoff-in.h (coff_object_p): Likewise. * mach-o-aarch64.c (bfd_mach_o_arm64_object_p), (bfd_mach_o_arm64_core_p): Likewise. * mach-o-arm.c (bfd_mach_o_arm_object_p), (bfd_mach_o_arm_core_p): Likewise. * mach-o-i386.c (bfd_mach_o_i386_object_p), (bfd_mach_o_i386_core_p): Likewise. * mach-o-x86-64.c (bfd_mach_o_x86_64_object_p), (bfd_mach_o_x86_64_core_p): Likewise. * mach-o.c (bfd_mach_o_header_p, bfd_mach_o_gen_object_p), (bfd_mach_o_gen_core_p, bfd_mach_o_fat_archive_p): Likewise. * mach-o.h (bfd_mach_o_object_p, bfd_mach_o_core_p), (bfd_mach_o_fat_archive_p, bfd_mach_o_header_p): Likewise. * mmo.c (mmo_object_p): Likewise. * pef.c (bfd_pef_object_p, bfd_pef_xlib_object_p): Likewise. * peicode.h (coff_real_object_p, pe_ILF_object_p), (pe_bfd_object_p): Likewise. * plugin.c (ld_plugin_object_p, bfd_plugin_object_p): Likewise. * ppcboot.c (ppcboot_object_p): Likewise. * rs6000-core.c (rs6000coff_core_p): Likewise. * som.c (som_object_setup, som_object_p): Likewise. * srec.c (srec_object_p, symbolsrec_object_p): Likewise. * tekhex.c (tekhex_object_p): Likewise. * vms-alpha.c (alpha_vms_object_p): Likewise. * vms-lib.c (_bfd_vms_lib_archive_p, _bfd_vms_lib_alpha_archive_p), (_bfd_vms_lib_ia64_archive_p, _bfd_vms_lib_txt_archive_p): Likewise. * wasm-module.c (wasm_object_p): Likewise. * xsym.c (bfd_sym_object_p): Likewise. * xsym.h (bfd_sym_object_p): Likewise. * aoutx.h (some_aout_object_p): Likewise, and callback parameter return type. * pdp11.c (some_aout_object_p): Likewise. * plugin.c (register_ld_plugin_object_p): Update object_p parameter type. * plugin.h (register_ld_plugin_object_p): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * libcoff.h: Regenerate. ld/ * plugin.c (plugin_object_p): Return a bfd_cleanup. (plugin_cleanup): New function.
2020-02-27bfd_stat_arch_elt buffer overflowAlan Modra1-1/+2
If you manage to put an xcoff object file into a non-xcoff archive (created by first putting a non-xcoff object file into it), and have xcoff support compiled into libbfd, then objdump -x on the archive can segfault. The problem is that _bfd_xcoff_stat_arch_elt expects abfd->arelt_data->arch_header to be one of the xcoff variants, but arelt_data is generated depending on the archive format, *not* the element format. * bfd.c (bfd_stat_arch_elt): Use vector of containing archive, if file is an archive element. * bfd-in2.h: Regenerate.
2020-02-19bfd_get_size cacheAlan Modra1-7/+12
We have calls to bfd_get_size when swapping in ELF section headers. Since object files can have a large number of sections, it's worth caching the file size rather than making lots of stat system calls. * bfd.c (struct bfd): Move format and direction to other bitfields. Add "size". * bfdio.c (bfd_get_size): Cache size when not writing file. * opncls.c (bfd_get_debug_link_info_1): Allow for bfd_get_size returning zero, ie. unknown. (bfd_get_alt_debug_link_info): Likewise. * bfd-in2.h: Regenerate.
2020-02-10z80 comments in archures.cAlan Modra1-10/+20
bfd-in2.h didn't match what was in archures.c and reloc.c. This fixes overlong comment lines and regenerates bfd-in2.h. * archures.c: Wrap overlong z80 comments. * bfd-in2.h: Regenerate.
2020-02-07Add support for the GBZ80 and Z80N variants of the Z80 architecture, and add ↵Sergey Belyashov1-8/+12
DWARF debug info support to the Z80 assembler. PR 25469 bfd * archures.c: Add GBZ80 and Z80N machine values. * reloc.c: Add BFD_RELOC_Z80_16_BE. * coff-z80.c: Add support for new reloc. * coffcode.h: Add support for new machine values. * cpu-z80.c: Add support for new machine names. * elf32-z80.c: Add support for new reloc. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. binutils* readelf.c (get_machine_flags): Add support for Z80N machine number. gas * config/tc-z80.c: Add -gbz80 command line option to generate code for the GameBoy Z80. Add support for generating DWARF. * config/tc-z80.h: Add support for DWARF debug information generation. * doc/c-z80.texi: Document new command line option. * testsuite/gas/z80/gbz80_all.d: New file. * testsuite/gas/z80/gbz80_all.s: New file. * testsuite/gas/z80/z80.exp: Run the new tests. * testsuite/gas/z80/z80n_all.d: New file. * testsuite/gas/z80/z80n_all.s: New file. * testsuite/gas/z80/z80n_reloc.d: New file. include * coff/internal.h (R_IMM16BE): Define. * elf/z80.h (EF_Z80_MACH_Z80N): Define. (R_Z80_16_BE): New reloc. ld * emulparams/elf32z80.sh: Use z80 emulation. * emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations. * emultempl/z80elf.em: Delete. * testsuite/ld-elf/pr22450.d: Expect to fail for the Z80. * testsuite/ld-elf/sec64k.exp: Fix Z80 assembly. * testsuite/ld-unique/pr21529.s: Avoid register name conflict. * testsuite/ld-unique/unique.s: Likewise. * testsuite/ld-unique/unique_empty.s: Likewise. * testsuite/ld-unique/unique_shared.s: Likewise. * testsuite/ld-unique/unique.d: Updated expected output. * testsuite/ld-z80/arch_z80n.d: New file. * testsuite/ld-z80/comb_arch_z80_z80n.d: New file. * testsuite/ld-z80/labels.s: Add more labels. * testsuite/ld-z80/relocs.s: Add more reloc tests. * testsuite/ld-z80/relocs_f_z80n.d: New file opcodes * z80-dis.c: Add support for GBZ80 opcodes.
2020-02-06ELF: Support the section flag 'o' in .section directiveH.J. Lu1-1/+3
As shown in https://sourceware.org/bugzilla/show_bug.cgi?id=25490 --gc-sections will silently remove __patchable_function_entries section and generate corrupt result. This patch adds the section flag 'o' to .section directive: .section __patchable_function_entries,"awo",@progbits,foo .section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat .section __patchable_function_entries,"awo",@progbits,bar,unique,4 .section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat,unique,1 which specifies the symbol name which the section references. Assmebler will set its elf_linked_to_section to a local section where the symbol is defined. Linker is updated to call mark_hook if gc_mark of any of its linked-to sections is set after all sections, except for backend specific ones, have been garbage collected. bfd/ PR gas/25381 * bfd-in2.h: Regenerated. * elflink.c (_bfd_elf_gc_mark_extra_sections): Call mark_hook on section if gc_mark of any of its linked-to sections is set and don't set gc_mark again. * section.c (asection): Add linked_to_symbol_name to map_head union. gas/ PR gas/25381 * config/obj-elf.c (get_section): Also check linked_to_symbol_name. (obj_elf_change_section): Also set map_head.linked_to_symbol_name. (obj_elf_parse_section_letters): Handle the 'o' flag. (build_group_lists): Renamed to ... (build_additional_section_info): This. Set elf_linked_to_section from map_head.linked_to_symbol_name. (elf_adjust_symtab): Updated. * config/obj-elf.h (elf_section_match): Add linked_to_symbol_name. * doc/as.texi: Document the 'o' flag. * testsuite/gas/elf/elf.exp: Run PR gas/25381 tests. * testsuite/gas/elf/section18.d: New file. * testsuite/gas/elf/section18.s: Likewise. * testsuite/gas/elf/section19.d: Likewise. * testsuite/gas/elf/section19.s: Likewise. * testsuite/gas/elf/section20.d: Likewise. * testsuite/gas/elf/section20.s: Likewise. * testsuite/gas/elf/section21.d: Likewise. * testsuite/gas/elf/section21.l: Likewise. * testsuite/gas/elf/section21.s: Likewise. ld/ PR ld/24526 PR ld/25021 PR ld/25490 * testsuite/ld-elf/elf.exp: Run PR ld/25490 tests. * testsuite/ld-elf/pr24526.d: New file. * testsuite/ld-elf/pr24526.s: Likewise. * testsuite/ld-elf/pr25021.d: Likewise. * testsuite/ld-elf/pr25021.s: Likewise. * testsuite/ld-elf/pr25490-2-16.rd: Likewise. * testsuite/ld-elf/pr25490-2-32.rd: Likewise. * testsuite/ld-elf/pr25490-2-64.rd: Likewise. * testsuite/ld-elf/pr25490-2.s: Likewise. * testsuite/ld-elf/pr25490-3-16.rd: Likewise. * testsuite/ld-elf/pr25490-3-32.rd: Likewise. * testsuite/ld-elf/pr25490-3-64.rd: Likewise. * testsuite/ld-elf/pr25490-3.s: Likewise. * testsuite/ld-elf/pr25490-4-16.rd: Likewise. * testsuite/ld-elf/pr25490-4-32.rd: Likewise. * testsuite/ld-elf/pr25490-4-64.rd: Likewise. * testsuite/ld-elf/pr25490-4.s: Likewise. * testsuite/ld-elf/pr25490-5-16.rd: Likewise. * testsuite/ld-elf/pr25490-5-32.rd: Likewise. * testsuite/ld-elf/pr25490-5-64.rd: Likewise. * testsuite/ld-elf/pr25490-5.s: Likewise. * testsuite/ld-elf/pr25490-6-16.rd: Likewise. * testsuite/ld-elf/pr25490-6-32.rd: Likewise. * testsuite/ld-elf/pr25490-6-64.rd: Likewise. * testsuite/ld-elf/pr25490-6.s: Likewise.
2020-02-02section.c: Fix typo in comments (withe -> with)H.J. Lu1-1/+1
* bfd-in2.h: Regenerated. * section.c (SEC_ASSEMBLER_SECTION_ID): Fix a typo in comments.
2020-02-02ELF: Add support for unique section ID to assemblerH.J. Lu1-2/+10
Clang's integrated assembler supports multiple section with the same name: .section .text,"ax",@progbits,unique,1 nop .section .text,"ax",@progbits,unique,2 nop "unique,N" assigns the number, N, as the section ID, to a section. The valid values of the section ID are between 0 and 4294967295. It can be used to distinguish different sections with the same section name. This is useful with -fno-unique-section-names -ffunction-sections. -ffunction-sections by default generates .text.foo, .text.bar, etc. Using the same string can save lots of space in .strtab. This patch adds section_id to bfd_section and reuses the linker internal bit in BFD section flags, SEC_LINKER_CREATED, for assmebler internal use to mark valid section_id. It also updates objdump to compare section pointers if 2 sections comes from the same file since 2 different sections can have the same section name. bfd/ PR gas/25380 * bfd-in2.h: Regenerated. * ecoff.c (bfd_debug_section): Add section_id. * section.c (bfd_section): Add section_id. (SEC_ASSEMBLER_SECTION_ID): New. (BFD_FAKE_SECTION): Add section_id. binutils/ PR gas/25380 * objdump.c (sym_ok): Return FALSE if 2 sections are in the same file with different section pointers. gas/ PR gas/25380 * config/obj-elf.c (section_match): Removed. (get_section): Also match SEC_ASSEMBLER_SECTION_ID and section_id. (obj_elf_change_section): Replace info and group_name arguments with match_p. Also update the section ID and flags from match_p. (obj_elf_section): Handle "unique,N". Update call to obj_elf_change_section. * config/obj-elf.h (elf_section_match): New. (obj_elf_change_section): Updated. * config/tc-arm.c (start_unwind_section): Update call to obj_elf_change_section. * config/tc-ia64.c (obj_elf_vms_common): Likewise. * config/tc-microblaze.c (microblaze_s_data): Likewise. (microblaze_s_sdata): Likewise. (microblaze_s_rdata): Likewise. (microblaze_s_bss): Likewise. * config/tc-mips.c (s_change_section): Likewise. * config/tc-msp430.c (msp430_profiler): Likewise. * config/tc-rx.c (parse_rx_section): Likewise. * config/tc-tic6x.c (tic6x_start_unwind_section): Likewise. * doc/as.texi: Document "unique,N" in .section directive. * testsuite/gas/elf/elf.exp: Run "unique,N" tests. * testsuite/gas/elf/section15.d: New file. * testsuite/gas/elf/section15.s: Likewise. * testsuite/gas/elf/section16.s: Likewise. * testsuite/gas/elf/section16a.d: Likewise. * testsuite/gas/elf/section16b.d: Likewise. * testsuite/gas/elf/section17.d: Likewise. * testsuite/gas/elf/section17.l: Likewise. * testsuite/gas/elf/section17.s: Likewise. * testsuite/gas/i386/unique.d: Likewise. * testsuite/gas/i386/unique.s: Likewise. * testsuite/gas/i386/x86-64-unique.d: Likewise. * testsuite/gas/i386/i386.exp: Run unique and x86-64-unique. ld/ PR gas/25380 * testsuite/ld-i386/pr22001-1c.S: Use "unique,N" in .section directives. * testsuite/ld-i386/tls-gd1.S: Likewise. * testsuite/ld-x86-64/pr21481b.S: Likewise.
2020-01-27Remove cpu-plugin.cAndreas Schwab1-1/+0
After commit 999d6dff80f cpu-plugin.c is no longer begin used. * Makefile.am (ALL_MACHINES): Remove cpu-plugin.lo. (ALL_MACHINES_CFILES): Remove cpu-plugin.c. * Makefile.in: Regenerate. * cpu-plugin.c: Remove. * archures.c (enum bfd_architecture): Remove bfd_arch_plugin. (bfd_plugin_arch): Remove declaration. * bfd-in2.h: Regenerate. * po/SRC-POTFILES.in: Regenerate.
2020-01-02Add support for the GBZ80, Z180, and eZ80 variants of the Z80 architecure. ↵Sergey Belyashov1-3/+25
Add an ELF based target for these as well. PR 25224 bfd * Makefile.am: Add z80-elf target support. * configure.ac: Likewise. * targets.c: Likewise. * config.bfd: Add z80-elf target support and new arches: ez80 and z180. * elf32-z80.c: New file. * archures.c: Add new z80 architectures: eZ80 and Z180. * coffcode.h: Likewise. * cpu-z80.c: Likewise. * bfd-in2.h: Likewise plus additional Z80 relocations. * coff-z80.c: Add new relocations for Z80 target and local label check. gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support for assembler code generated by SDCC. Add new relocation types. Add z80-elf target support. * config/tc-z80.h: Add z80-elf target support. Enable dollar local labels. Local labels starts from ".L". * testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict. * testsuite/gas/all/fwdexp.s: Likewise. * testsuite/gas/z80/suffix.d: Fix failure on ELF target. * testsuite/gas/z80/z80.exp: Add new tests * testsuite/gas/z80/dollar.d: New file. * testsuite/gas/z80/dollar.s: New file. * testsuite/gas/z80/ez80_adl_all.d: New file. * testsuite/gas/z80/ez80_adl_all.s: New file. * testsuite/gas/z80/ez80_adl_suf.d: New file. * testsuite/gas/z80/ez80_isuf.s: New file. * testsuite/gas/z80/ez80_z80_all.d: New file. * testsuite/gas/z80/ez80_z80_all.s: New file. * testsuite/gas/z80/ez80_z80_suf.d: New file. * testsuite/gas/z80/r800_extra.d: New file. * testsuite/gas/z80/r800_extra.s: New file. * testsuite/gas/z80/r800_ii8.d: New file. * testsuite/gas/z80/r800_z80_doc.d: New file. * testsuite/gas/z80/z180.d: New file. * testsuite/gas/z80/z180.s: New file. * testsuite/gas/z80/z180_z80_doc.d: New file. * testsuite/gas/z80/z80_doc.d: New file. * testsuite/gas/z80/z80_doc.s: New file. * testsuite/gas/z80/z80_ii8.d: New file. * testsuite/gas/z80/z80_ii8.s: New file. * testsuite/gas/z80/z80_in_f_c.d: New file. * testsuite/gas/z80/z80_in_f_c.s: New file. * testsuite/gas/z80/z80_op_ii_ld.d: New file. * testsuite/gas/z80/z80_op_ii_ld.s: New file. * testsuite/gas/z80/z80_out_c_0.d: New file. * testsuite/gas/z80/z80_out_c_0.s: New file. * testsuite/gas/z80/z80_reloc.d: New file. * testsuite/gas/z80/z80_reloc.s: New file. * testsuite/gas/z80/z80_sli.d: New file. * testsuite/gas/z80/z80_sli.s: New file. ld * Makefile.am: Add new target z80-elf * configure.tgt: Likewise. * emultempl/z80.em: Add support for eZ80 and Z180 architectures. * emulparams/elf32z80.sh: New file. * emultempl/z80elf.em: Likewise. * testsuite/ld-z80/arch_ez80_adl.d: Likewise. * testsuite/ld-z80/arch_ez80_z80.d: Likewise. * testsuite/ld-z80/arch_r800.d: Likewise. * testsuite/ld-z80/arch_z180.d: Likewise. * testsuite/ld-z80/arch_z80.d: Likewise. * testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z180.d: Likewise. * testsuite/ld-z80/labels.s: Likewise. * testsuite/ld-z80/relocs.s: Likewise. * testsuite/ld-z80/relocs_b_ez80.d: Likewise. * testsuite/ld-z80/relocs_b_z80.d: Likewise. * testsuite/ld-z80/relocs_f_z80.d: Likewise. * testsuite/ld-z80/z80.exp: Likewise. opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-12-17Remove tic80 supportAlan Modra1-1/+0
This is one way of fixing ubsan bug reports, just delete the code. The assembler support was removed back in 2005 along with other non-BFD assemblers, but somehow the remainder of the port stayed in. bfd/ * coff-tic80.c: Delete file. * cpu-tic80.c: Delete file. * archures.c: Remove tic80 support. * coffcode.h: Likewise. * coffswap.h: Likewise. * targets.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * Makefile.am: Likewise. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove tic80 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * doc/as.texi: Remove mention of tic80. include/ * coff/tic80.h: Delete file. * opcode/tic80.h: Delete file. ld/ * emulparams/tic80coff.sh: Delete file. * scripttempl/tic80coff.sc: Delete file. * configure.tgt: Remove tic80 support. * Makefile.am: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. opcodes/ * tic80-dis.c: Delete file. * tic80-opc.c: Delete file. * disassemble.c: Remove tic80 support. * disassemble.h: Likewise. * Makefile.am: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2019-12-12Remove duplicate castAlan Modra1-1/+1
* libbfd.c (bfd_get): Don't cast result of bfd_get_8. * bfd-in2.h: Regenerate.
2019-12-11Make bfd_get_8 return a bfd_vma like other bfd_get_* functionsAlan Modra1-2/+2
And similarly for bfd_get_signed_8. bfd/ * libbfd.c (bfd_get_8): Return a bfd_vma. (bfd_get_signed_8): Return a bfd_signed_vma. * bfd-in2.h: Regenerate. binutils/ * od-xcoff.c (dump_dumpx_core): Adjust for bfd_h_get_8 change.
2019-11-25Pass section when available to bfd_octets_per_byteAlan Modra1-1/+1
and other tidies. I think it's better to default to passing the section to bfd_octets_per_byte, even in cases where we know it won't make a difference. A number of the coff reloc functions used bfd_octets_per_byte wrongly, not factoring it into the offset into the data buffer. As it happens, the targets using those files always had bfd_octets_per_byte equal to one, so there wasn't any detectable wrong behaviour. However, it is wrong in the source and might cause trouble for anyone creating a new target. Besides fixing that, the patch also defines OCTETS_PER_BYTE as one in target files where that is appropriate. bfd/ * archures.c (bfd_octets_per_byte): Tail call bfd_arch_mach_octets_per_byte. * coff-arm.c (OCTETS_PER_BYTE): Define. (coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE with section. Correct "addr". Remove ATTRIBUTE_UNUSED. * coff-i386.c (coff_i386_reloc): Similarly. * coff-mips.c (mips_reflo_reloc): Similarly. * coff-x86_64.c (coff_amd64_reloc): Similarly. * elf32-msp430.c (OCTETS_PER_BYTE): Define. (rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section. * elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly. * elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly. * elf32-s12z.c (opru18_reloc): Similarly. * elf32-sh.c (sh_elf_reloc): Similarly. * elf32-spu.c (spu_elf_rel9): Similarly. * elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly. * elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc), (ppc64_elf_toc64_reloc): Similarly. * bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte. * cofflink.c (_bfd_coff_link_input_bfd), (_bfd_coff_reloc_link_order): Likewise. * elf.c (_bfd_elf_section_offset): Likewise. * elflink.c (resolve_section, bfd_elf_perform_complex_relocation), (elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order), (bfd_elf_final_link): Likewise. * elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice to set SEC_ELF_OCTETS. * reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case. (bfd_install_relocation): Likewise. (_bfd_final_link_relocate): Don't recalculate octets. * syms.c (_bfd_stab_section_find_nearest_line): Introduc new "octets" temp. * bfd-in2.h: Regenerate. ld/ * ldexp.c (fold_name): Pass section to bfd_octets_per_byte. * ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte unnecessarily.
2019-11-25Introduce new section flag: SEC_ELF_OCTETSChristian Eggers1-2/+9
All symbols, sizes and relocations in this section are octets instead of bytes. Required for DWARF debug sections as DWARF information is organized in octets, not bytes. bfd/ * section.c (struct bfd_section): New flag SEC_ELF_OCTETS. * archures.c (bfd_octets_per_byte): New parameter sec. If section is not NULL and SEC_ELF_OCTETS is set, one octet es returned [ELF targets only]. * bfd.c (bfd_get_section_limit): Provide section parameter to bfd_octets_per_byte. * bfd-in2.h: regenerate. * binary.c (binary_set_section_contents): Move call to bfd_octets_per_byte into section loop. Provide section parameter to bfd_octets_per_byte. * coff-arm.c (coff_arm_reloc): Provide section parameter to bfd_octets_per_byte. * coff-i386.c (coff_i386_reloc): likewise. * coff-mips.c (mips_reflo_reloc): likewise. * coff-x86_64.c (coff_amd64_reloc): likewise. * cofflink.c (_bfd_coff_link_input_bfd): likewise. (_bfd_coff_reloc_link_order): likewise. * elf.c (_bfd_elf_section_offset): likewise. (_bfd_elf_make_section_from_shdr): likewise. Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes, .debug*, .zdebug* and .note.gnu*. * elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter to bfd_octets_per_byte. * elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise. * elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise. * elf32-s12z.c (opru18_reloc): likewise. * elf32-sh.c (sh_elf_reloc): likewise. * elf32-spu.c (spu_elf_rel9): likewise. * elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise * elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise. (ppc64_elf_addr16_ha_reloc): likewise. (ppc64_elf_toc64_reloc): likewise. * elflink.c (bfd_elf_final_link): likewise. (bfd_elf_perform_complex_relocation): likewise. (elf_fixup_link_order): likewise. (elf_link_input_bfd): likewise. (elf_link_sort_relocs): likewise. (elf_reloc_link_order): likewise. (resolve_section): likewise. * linker.c (_bfd_generic_reloc_link_order): likewise. (bfd_generic_define_common_symbol): likewise. (default_data_link_order): likewise. (default_indirect_link_order): likewise. * srec.c (srec_set_section_contents): likewise. (srec_write_section): likewise. * syms.c (_bfd_stab_section_find_nearest_line): likewise. * reloc.c (_bfd_final_link_relocate): likewise. (bfd_generic_get_relocated_section_contents): likewise. (bfd_install_relocation): likewise. For section which have SEC_ELF_OCTETS set, multiply output_base and output_offset with bfd_octets_per_byte. (bfd_perform_relocation): likewise. include/ * coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN), (PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls. binutils/ * objdump.c (disassemble_data): Provide section parameter to bfd_octets_per_byte. (dump_section): likewise (dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set. gas/ * as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF. * dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for .debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str and .debug_ranges sections. * write.c (maybe_generate_build_notes): Set section flag SEC_OCTETS for .gnu.build.attributes section. * frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if SEC_OCTETS is set. * symbols.c (resolve_symbol_value): Likewise. ld/ * ldexp.c (fold_name): Provide section parameter to bfd_octets_per_byte. * ldlang (init_opb): New argument s. Set opb_shift to 0 if SEC_ELF_OCTETS for the current section is set. (print_input_section): Pass current section to init_opb. (print_data_statement,print_reloc_statement, print_padding_statement): Likewise. (lang_check_section_addresses): Call init_opb for each section. (lang_size_sections_1,lang_size_sections_1, lang_do_assignments_1): Likewise. (lang_process): Pass NULL to init_opb.
2019-11-18PR25196, abort in rewrite_elf_program_headerAlan Modra1-0/+1
This patch introduces a new "sorry, cannot handle this file" bfd error status. The idea is to use this error in cases where bfd hasn't found a bfd_bad_value error, ie. an input file or set of options that are invalid, but rather an input file that is simply too difficult to process. Typically this might happen with fuzzed object files such as the one in the PR, a wildly improbable core file. Some things are just not worth wasting time over to fix "properly". PR 25196 * bfd.c (bfd_error_type): Add bfd_error_sorry. (bfd_errmsgs): Likewise. * elf.c (rewrite_elf_program_header): Don't abort on confused lma/alignment. Replace bfd_error_bad_value with bfd_error_sorry. (_bfd_elf_validate_reloc): Use bfd_error_sorry. (_bfd_elf_final_write_processing): Likewise. * bfd-in2.h: Regenerate.
2019-11-07Remove CR16C supportAlan Modra1-44/+0
I think it is past time to remove CR16C support. CR16C was added in 2004, and only for ld. gas and binutils support is lacking, and there have been no commits to bfd/elf32-cr16c.c other than warning fixes or global maintainers making changes to all targets. I see no maintainer listed for CR16C, and no commits from anyone at NSC supporting the target. Furthermore, at the time the CR16 support was added in 2007, config.sub was changed upstream to no longer recognise cr16c as a valid cpu. That means the CR16C ld support is only available as a secondary target by configuring with, for example, --enable-targets=all or --enable-targets=cr16c-unknown-elf. No testing of the CR16C target is possible. include/ * elf/cr16c.h: Delete. bfd/ * cpu-cr16c.c: Delete. * elf32-cr16c.c: Delete. * Makefile.am, * archures.c, * config.bfd, * configure.ac, * reloc.c, * targets.c: Remove cr16c support. * Makefile.in, * bfd-in2.h, * configure, * libbfd.h, * po/SRC-POTFILES.in: Regenerate. ld/ * emulparams/elf32cr16c.sh: Delete. * scripttempl/elf32cr16c.sc: Delete. * Makefile.am, * configure.tgt: Remove cr16c support. * NEWS: Mention removal of cr16c. * Makefile.in, * po/BLD-POTFILES.in: Regenerate.
2019-10-21ar P supportAlan Modra1-1/+4
This patch extends "ar P" to allow creation of normal (as distinct from thin) archives with full path names. PR 452 PR 25104 bfd/ * archive.c (normalize): Return file unchanged when BFD_ARCHIVE_FULL_PATH. (_bfd_construct_extended_name_table): Pass abfd, the output bfd, to normalize. (_bfd_archive_bsd44_construct_extended_name_table): Likewise. * bfd.c (struct bfd): Make flags a full flagword. (BFD_ARCHIVE_FULL_PATH): Define. * bfd-in2.h: Regenerate. binutils/ * ar.c (write_archive): Set BFD_ARCHIVE_FULL_PATH. * doc/binutils.texi (extract from archive): Mention restrictions when extracting from archives with full paths. (ar P): Update to current P support. (ar -X32_64): Fix spelling.
2019-09-23linker bfd.h tidyAlan Modra1-43/+28
bfd/ * bfd-in.h (bfd_symbol, bfd_section_already_linked), (bfd_elf_version_tree): Delete forward declarations. Move other forward decls and remaining elf function decl later. (bfd_section_already_linked_table_init), (bfd_section_already_linked_table_free), (_bfd_handle_already_linked, _bfd_nearby_section), (_bfd_fix_excluded_sec_syms): Move to bfdlink.h. include/ * bfdlink.h (struct bfd_section_already_linked): Forward declare. (bfd_section_already_linked_table_init), (bfd_section_already_linked_table_free), (_bfd_handle_already_linked, _bfd_nearby_section), (_bfd_fix_excluded_sec_syms): Declare.
2019-09-23ecoff bfd.h tidyAlan Modra1-42/+0
bfd/ * bfd-in.h: Move ecoff function declarations.. * ecoff-bfd.h: ..to here, new file. * ecoff.c: Include ecoff-bfd.h. * ecofflink.c: Likewise. * elf64-alpha.c: Likewise. * elfxx-mips.c: Likewise. * bfd-in2.h: Regenerate. gas/ * config/obj-ecoff.c: Include ecoff-bfd.h. * config/obj-elf.c: Likewise.
2019-09-23elf bfd.h tidyAlan Modra1-69/+0
bfd/ * bfd-in.h (enum notice_asneeded_action): Move to bfdlink.h. Move most other elf declarations.. * elf-bfd.h: ..to here. * bfd-in2.h: Regenerate. include/ * bfdlink.h (enum notice_asneeded_action): Define. ld/ * deffilep.y: Include bfdlink.h. * ldelf.c: Likewise. * ldelfgen.c: Likewise. * ldver.c: Likewise. * mri.c: Likewise. * emultempl/irix.em: Don't include ld.h, ldmain.h, libiberty.h. Comment.
2019-09-23m68k bfd.h tidyAlan Modra1-10/+0
bfd/ * bfd-in.h: Move m68k function declaration.. * cpu-m68k.h: ..to here, new file.. * elf32-m68k.h: ..and here, new file. * elf32-m68k.c: Include cpu-m68k.h and elf32-m68k.h. * bfd-in2.h: Regenerate. ld/ * emultempl/m68kelf.em: Include elf32-m68k.h. opcodes/ * m68k-dis.c: Include cpu-m68k.h
2019-09-23bfin bfd.h tidyAlan Modra1-4/+0
bfd/ * bfd-in.h: Move bfin function declaration.. * elf32-bfin.h: ..to here, new file. * elf32-bfin.c: Include elf32-bfin.h. * bfd-in2.h: Regenerate. ld/ * emultempl/bfin.em: Include elf32-bfin.h.
2019-09-23cr16 bfd.h tidyAlan Modra1-4/+0
bfd/ * bfd-in.h: Move cr16 function declaration.. * elf32-cr16.h: ..to here, new file. * elf32-cr16.c: Include elf32-cr16.h. * bfd-in2.h: Regenerate. ld/ * emultempl/cr16elf.em: Include elf32-cr16.h.
2019-09-23obsoleted bfd.h tidyAlan Modra1-17/+0
* bfd-in.h (bfd_sunos_get_needed_list), (bfd_sunos_record_link_assignment), (bfd_sunos_size_dynamic_sections), (bfd_i386linux_size_dynamic_sections), (bfd_sparclinux_size_dynamic_sections): Delete obsolete decls. * bfd-in2.h: Regenerate.
2019-09-23xcoff bfd.h tidyAlan Modra1-28/+0
bfd/ * bfd-in.h: Move xcoff function declarations.. * xcofflink.h: ..to here, new file. * xcofflink.c: Include xcofflink.h. * coff-rs6000.c (bfd_xcoff_ar_archive_set_magic): Delete unused func. * bfd-in2.h: Regenerate. ld/ * emultempl/aix.em: Include xcofflink.h.
2019-09-23coff bfd.h tidyAlan Modra1-10/+0
bfd/ * bfd-in.h: Delete coff forward refs and move coff declaration.. * coff-bfd.h: ..to here. * bfd-in2.h: Regenerate. binutils/ * dlltool.c: Include coff-bfd.h.
2019-09-23arm bfd.h tidyAlan Modra1-140/+0
bfd/ * bfd-in.h: Move arm declaraions.. * cpu-arm.h: ..to here, new file.. * coff-arm.h: ..and here, new file.. * elf32-arm.h: ..and here, new file. * cpu-arm.c: Include cpu-arm.h. * coff-arm.c: Include cpu-arm.h and coff-arm.h. * elf32-arm.c: Include cpu-arm.h and elf32-arm.h. * pe-arm.c: Move function rename defines later. * pe-arm-wince.c: Likewise and include sysdep.h and bfd.h early. * bfd-in2.h: Regenerate. gas/ * config/tc-arm.c: Include cpu-arm.h. ld/ * emultempl/armelf.em: Include elf32-arm.h. * emultempl/pe.em: Move func defines later and include coff-arm.h.
2019-09-23tic6x bfd.h tidyAlan Modra1-4/+0
* bfd-in.h: Move tic6x function declaration.. * elf32-tic6x.h: ..to here. * bfd-in2.h: Regenerate.
2019-09-23aarch64 bfd.h tidyAlan Modra1-86/+0
bfd/ * bfd-in.h: Move aarch64 declarations and defines.. * cpu-aarch64.h: ..to here, new file.. * elfxx-aarch64.h: ..and here. * cpu-aarch64.c: Include cpu-aarch64.h. * elfnn-aarch64.c: Likewise. * bfd-in2.h: Regenerate. ld/ * emultempl/aarch64elf.em: Include elfxx-aarch64.h.
2019-09-23tic54x bfd.h tidyAlan Modra1-8/+0
* bfd-in.h: Delete ticoff function declarations. * coff-tic54x.c (bfd_ticoff_set_section_load_page), (bfd_ticoff_get_section_load_page): Make static. * bfd-in2.h: Regenerate.
2019-09-23h8300 bfd.h tidyAlan Modra1-4/+0
* bfd-in.h: Move h8300 function declaration to.. * cpu-h8300.h: ..here, new file. * cpu-h8300.c: Include cpu-h8300.h. * elf32-h8300.c: Likewise. * bfd-in2.h: Regenerate.
2019-09-23ia64 bfd.h tidyAlan Modra1-7/+0
bfd/ * bfd-in.h: Move ia64 function declarations.. * elfxx-ia64.h: ..to here. * bfd-in2.h: Regenerate. ld/ * emultempl/ia64elf.em: Include elfxx-ia64.h.
2019-09-23v850 bfd.h tidyAlan Modra1-7/+0
bfd/ * bfd-in.h: Move v850 function declarations.. * elf32-v850.h: ..to here, new file. * elf32-v850.c: Include elf32-v850.h. * bfd-in2.h: Regenerate. ld/ * emultempl/v850elf.em: Include elf32-v850.h.
2019-09-23mips bfd.h tidyAlan Modra1-4/+0
bfd/ * bfd-in.h: Move mips function declaration to.. * elfxx-mips.h: ..here. * bfd-in2.h: Regenerate. opcodes/ * mips-dis.c: Include elfxx-mips.h. Move "elf-bfd.h" and "elf/mips.h" earlier.
generated by cgit v1.1 at 2024-10-15 09:55:36 +0000